Thought i'd be the first with a which screen protector thread!
Brando do one
Expansys do one
has anyone used either on any device? I don't like the ones that dull the screen by giving a matt like appearance. Does the Brando do this? - I can't remember if it was a brando I used on my p800 that did this but things may have improved since then.
Any suggestions appreciated
thanks
I've used Brado since my SE P800, which the was the old "fuzzy" version. This came off when he introduced the "Ultra Clear" protector. Have one on it's way to fit on my new TyTN. Been using it for my Qtek S100and 2020 as well...love it
Brando Workshop
I'm using the standard K-Jam protector from www.shieldzone.com
You can bang on it with your keys, and you still can't scratch it...
using the brando ultra clear on mine. Its great and virtually not visible. However, it only covers the "screen area" of the today screen. i.e. the part that is displayed and not the entire visible area of the screen. This way, you can still trap dust on the edges which are also not protected. I've heard good things about the exim ultra clear protectors but don't know if it covers the entire screen or just the visible area.
But does the standard K-Jam protector from www.shieldzone.com fit the Hermes? It comes with 16 pieces which cover body and keyboard I think...
Got it for my Zen Vision M and it is fantastic!!! Initially when you apply the film there are small bubbles but they all! go by the next day.
So as long as K-Jam and Hermes are similar sizes... its fine!
Looking at screen protectors the best one according to reviews is the PPC Tech WriteSHIELD???
Ive found it on expansys.co.uk here but am unsure which to go for, crystal clear or anti-glare?!
Any thoughts people?
You may want to check out the JavoEdge screen protector. These things last for ever and they go on easly and quickly. They are non stick, washable removable and re-applyable. They have the antiglare and the ultra clear for the TyTN.
I've been using the JavoEdge protectors for the last year, they are about $10 a pop but well worth it.
On a side note, the ultra clear are very clear... you don't notice the protector at all, but they show every little fingure print. I think I'm going to go back to the antiglare becuase of the fingure prints and the ultra clear make it hard to view outside with reflections.
Kyri said:
But does the standard K-Jam protector from www.shieldzone.com fit the Hermes? It comes with 16 pieces which cover body and keyboard I think...
Got it for my Zen Vision M and it is fantastic!!! Initially when you apply the film there are small bubbles but they all! go by the next day.
So as long as K-Jam and Hermes are similar sizes... its fine!
Click to expand...
Click to collapse
The K-Jam and Hermes have identically sized screens, so the screen shield will fit. The rest of the kit will not.
Incidentally, I've removed my shield... I just didn't like the "feel" of it. If someone has a suggestion for a screen protector that not only is invisible but also "feels" invisible, I'd like to know about it...
goestoeleven said:
Incidentally, I've removed my shield... I just didn't like the "feel" of it. If someone has a suggestion for a screen protector that not only is invisible but also "feels" invisible, I'd like to know about it...
Click to expand...
Click to collapse
Try the JavoEdge Ultra Clear. You can't see it or feel it. But be warned with the ultra clear it will show every single fingure print and smug just as if there was nothing on the screen and you will be wipping your screen constantly. The antiglare has a rough textture to it but it also hides all the little fingure prints.
I had the antiglare on my JasJar and loved it. When I ordered one for my TyTN i didn't relize I ordered the ultra clear. The screen is very beautiful since you don't see the protector but man I must wipe down my screen 5-10 times a day now. I'm going to try the antiglare on the TyTN to see how I like it, but the down side is now that i see how nice the screen is with the ultra clear I may not be able to handle the antiglare.
The JavoEdge screen protectors have been by far the best I've ever used. My last one was on my Jasjar for about a year (I sold my JasJar when I got the TyTN and it still had the same protector) and it still never showed any scratches or lines from using the stylus.
Here is a link to the TyTN screen protectors
http://www.javoedge.com/reflexeshop/productCatalog/viewByBrandModel.do?brandId=21&modelId=567
My favorite is MFOP. 3 years on SE P800 w/o any problem. Ordered one for TyTN in advance and put at the first day.
tytn specific from shieldzone
screen only:
http://www.shieldzone.com/form/index.html?preadd=action&key=HTCTYTN
$10
full:
http://www.shieldzone.com/form/index.html?preadd=action&key=HTCTYTNF
$25
i don't have one for my tytn yet (in fact, i don't have my tytn yet - arrives thu/fri) - but i've used the invisible shield (shieldzone) for some other stuff i have (camera, palm) and as stated earlier, it's pretty good.
I like the Martin Fields protector - pretty much invisible and washable/reuseable.
gigglegaggle said:
screen only:
http://www.shieldzone.com/form/index.html?preadd=action&key=HTCTYTN
$10
full:
http://www.shieldzone.com/form/index.html?preadd=action&key=HTCTYTNF
$25
i don't have one for my tytn yet (in fact, i don't have my tytn yet - arrives thu/fri) - but i've used the invisible shield (shieldzone) for some other stuff i have (camera, palm) and as stated earlier, it's pretty good.
Click to expand...
Click to collapse
Anyone know if this would fit the MDA Vario II?
Brando
Hi I have a question about the Brando screen protectors, what do people mean when they say it does not cover the whole screen? does it only cover a portion of it? or does it cover all of the screen?
thanks,
Mike
A few weeks ago i orded some boxwave clear protectors. all four corners where bended and cracked( two protectors). It seems boxwave has a bad batch, because have read others story's about corners that doesn't stick on the screen ( bended).
I did send them back and waiting for RMA.
The boxwave ones where for my Dell Axim X51v.
On my TyTN i use Brando anti glare protectors and i'm very happy with them, they fit perfect and easy to apply.
So i orded brando's crystal clears for my Dell and TyTN. Yesterday i placed them on both devices and they are also like the anti glare ones, just perfect.
high quality, the correct size( fit the whole screen without a spot unprotected) and are very clear. I don't notice them on my screen.
A big diference with the anti glare ones.
I don't say that boxwaves are less in quality, but with my brando's i didn't had any issues.
I use PPCTechs AntiGlare (AG) Write shield. A bit expensive but very good.
I use EXIM SPUC screen protector on my tytn/jasjam.
ultra clear glass like finish, not the anti-glare version, but this is my personal choice. EXIM also have AG version as well.
Here is a review of the one im using
http://www.mtekk.com.au/tabid/54/articleType/ArticleView/articleId/561.aspx
Proporta
best one is from Proporta - just excellent
richard d said:
I like the Martin Fields protector - pretty much invisible and washable/reuseable.
Click to expand...
Click to collapse
What does "Washable" really mean? Take it off, run it under water, let it dry and reapply? For some reason, I don't think it will work.
One explaination of "washable"
anubus12 said:
What does "Washable" really mean? Take it off, run it under water, let it dry and reapply? For some reason, I don't think it will work.
Click to expand...
Click to collapse
I just got a few different screen protectors from http://www.bestskinsever.com/servlet/the-11/T-dsh-Mobile-MDA--fdsh--Cingular/Detail a few weeks ago.
I have had several different manufactures of screen protectors befor this one. All of the other screen protectors were easily scratched. And, if you ever got any liquid on them, they would haze up. So, you ended up replacing them very often (which was why the usually come in a 12 pack )
However, the screen protector from Best Skins I haven't gotten a single scratch that I couldn't get out with a micro-fiber cloth. During a vacation recently (where the 8525 was the GPS), I had several times when I got a little sunscreen or lotion transfer from my fingertip to the screen. With the old screen protectors, that would be it. They would smudge and streak, and I'd have to replace them. With this new "washable" screen, a little water (or let's face it--spit ) on the micro-fiber cloth and it was good as new.
So, that's what I think they mean by washable. I don't think mine could survive being pulled off. But, I don't think I'm going to have to any time soon.
Related
I've just ordered an MDA Vario and it's going to take a little time to reach me (I'm not currently in the UK). Before it gets here I'm trying to work out which screen protector to buy. Has anyone tried the Invisible Shield protector? The material looks superb and I've read load of good things about their performance on iPods.
My current PDA is a Tungsten T3 and I have a Martin Fields screen protector on it. (MF protector for Wizard here).
I love the MF but am really interested in hearing experiences with the IS if anyone on these forums has tried it.
Yeah i want one too but was wondering, do they leave any marks when you peel them off afterwards? From the glue and stuff?
Quality screen protectors like Martin Fields and the IS should leave nothing behind after they're removed.
I think brando screen protector is not bad too. Im currently using it.
I have change 2 screen protector since I got my wizard.
- Expansys, Cant fit in properly. Bubble occur after stick in.
i've tried 3 different screen protectors, then i used pocketpctechs AG shield and i'm not gonna try anything else. It's perfect, reusable, no glue is used and installation is pretty simple. also it comes with screen cleaners and all that. highly recommended
For me brando's would be ok. I usually have the store person do the application since I can't do it on my own [I messed up 2 protectors when I tried doing it at home]. I'd say choose one that isn't adhesive but static that way no residue is left on the screen when you remove it. also most of them are washable/reusable... if you find a scratch on the side you use most often [i.e. the area along the SIP] just have it removed and re-installed reversed [not the face but the top and bottom].
The Brando ultraclear is OK. If you prefer a non-glossy one, the Brando regular is perfect (you will lose a bit of brightness).
I like www.boxwave.com 's version
They have a anti-glare, and a regular one, they are washable you can remove them and wash them under soap and water and reapply, they come with cloth cleaner, and a little scraper thing that helps get the bubbles out.
Here's a super cheap solution, and it works GREAT for me.
I went to Staples and bought a package of baseball card protector pages that are designed to fit into a 3-ring binder. The size of each card holder is just slightly larger than the screen on the MDA.
What I did was take a straight edge and X-Acto knife and cut a small piece of plastic that is a couple millimeters larger than the screen on each side. I simply tuck the plastic I've trimmed under the lip between the device and screen, and it holds in place just fine.
No adhesive, no mess, easy as pie, and the entire package of plastic sleeves was less than 3 bucks. It will surely last longer than the life of the device.
- Justin
Got my second Brando regular protector (first one wasn't returned when my magician was replaced). Fits perfect, very scratch-resistant & the anti-glare is very useful while navigating in the car.
Cheers, M
fone_fanatic said:
i've tried 3 different screen protectors, then i used pocketpctechs AG shield and i'm not gonna try anything else. It's perfect, reusable, no glue is used and installation is pretty simple. also it comes with screen cleaners and all that. highly recommended
Click to expand...
Click to collapse
Same here.. I have used BoxWave, wich are also very good, but WriteShields from pocketpctechs are great.
I also had an "InvivibleShield" on my 8125 for a couple minutes. I installed it and saw that it was not plum on, so I went to take it off and reinstall.. When I removed it I thought I was going to pull my screen up with the protector. Stay away from those things... I then tested those claims they make on the website, about being indestructible. Pens had no trouble getting through, and scissors went through like soft butter.
$.02
I bought a boxwave and was not happy with the glare free one. I have used them on my Treos and liked them, but the one that came for my wizard sucked. It really blurred the screen and made it look like a prism. Maybe it was defective, but I ended up buying another one from javoedge and I am quite happy with it.
just my $.02
greg
I also got an anti-glare from boxware, it does have issues however I emailed them about it and they are getting a new one that doesn't have the issues and they should have it in about a week. To make it even better they created a gift order for the new one for me.
I've tried a number of the commercial screen protectors in the past and wasn't happy with any of them. Of course, there is the ridiculous cost for a little piece of plastic.
The best solution I have found is to use clear vinyl sheeting that you can find at any fabric store, typically for a couple of dollars US per yard. Just cut to fit your screen, clean your screen, wash your hands and vinyl rectangle with liquid hand soap, shake off as much water as possible (but not all), and attach and smooth out bubbles.
Benefits:
- Minimal screen image degradation as compared to many commercial screen protectors
- No adhesives to gunk up the screen
- Lasts 6 months or so
- Easy to replace
- Costs about a nickle per cover
I also have the pocketpctechs write shield anti-glare.
Comes in a nice kit, can't tell its there when the screen is on.
http://www.pocketpctechs.com/main.asp?unit=Cingular_8125-559&area=home
I bought mine from www.nushield.com, but I haven´t been able to apply the first one to my screen.
I´ve used them on my Handspring Visor Edge and on my Himalaya with very good results, but on the Wizard, I just can´t get it installed. Will keep you posted!
Stefan out
Brando screen protector, Boxwave and Martin Fields are my favorites!
I've heard a lot about this Brando, but it is a bit too expensive for me for a piece of plastic. I think they are selling for GBP7+ in eBay. I wonder, is it so good? I've been looking for those 'card' type screen protector that is ultra easy to apply and bubble free because the protector itself feels like a card. Imagine, since the protector is like a card, it is impossible to get bubble under it. Anyone know where in the net I can get one card type for UK??
BTW, I've bought the 'Sensifilm' protector from eBay. It said many things, but of the two thing, antiglare and antiscractch is 100% bluff. Mine still give me glare and it has been scratched like mad with my stylus. Either the HTC is very bad in designing a stylus, or the screen protector is terribly weak. I think the weak protector is a more likely answer.
30$ for a screen protector. That is so silly. I got a protector for my psp for 6$ and it works great. Geez, pocketpctechs is a rip.
Cant i get some from a local store instead?
I can highly recommend Brando UltraClear too! Easy to attach, not visible when attached carefully, no reduction of brightness - display looks like without one (for those who do not like the reflection of the display: buy the Brando classic).
Regards
Carsten
I have made a new thread as it is very confusing what the best protector for the orbit 2 is as it has the 2nd camera and the speaker is in a different position.
I’m desperate as my original protector fell off :-( going to take my old Orbit 1 out now until I get a new protector.
Any good recommendations?
This one here appears to be a direct replacement of teh one that came with the Orbit when you bought it.
DuraSec for Orbit II - £7.95
http://cgi.ebay.co.uk/DuraSec-HighTec-screen-protector-for-O2-XDA-orbit-2_W0QQitemZ170200489138QQihZ007QQcategoryZ68029QQrdZ1QQssPageNameZWD1VQQ_trksidZp1638.m118.l1247QQcmdZViewItem
@Ziggyred - Apols dude, but I'm a little cynical about screen protectors which do not show picutres of the actual device I'm interested in.
I ordered the Brando one for the Orbit II, but to my disspointment, despite it being plugged on Brando.hk's website as being Orbit2 compatible, the top of it is not such a great fit. It looks like it's designed specfically for the Cruise, but not the Orbit II.
Can anyone here categorically state (and show!) protectors specifically designed for the Orbit II ?
I have been looking on other forums and there doesn't seem to be any which are a good fit for the orbit 2
I only know a german shop yet.
http://www.nexave.de/displayschutzfolien/detail.php?artikelnr=185
I bought this one for my Orbit 2:
http://cgi.ebay.co.uk/EXiM-SPUC-Scr...ageNameZWD2VQQcmdZViewItem?_trksid=p1638.m122
Is a perfect fit although was annoyed that I dropped the protector and it got dust on it before I applied it.
Washed it and it is batter.
It fits perfectly, has a cut out for the speaker and the camera.
@KennyDies - How many are in a pack ?
And does it have a high tack adhesion ? I wouldn't want it leaving any residue....
Thanks
Dark Knight said:
@KennyDies - How many are in a pack ?
And does it have a high tack adhesion ? I wouldn't want it leaving any residue....
Thanks
Click to expand...
Click to collapse
I'm also very interested in this
Reading through the Ebay link to Exim screen protectors, it appears that it doesn't use any sticky backed adhesion.
Only one is supplied ($$$! ) but I had a look around a few other sites and these protectors seem to be quite rated.
So I bit the bullet and ordered two.
Cheers all. I've bought two as well.
Messed up putting the one in the box on, then bought one which only covered the screen. I can see the silver edge getting scratched, which would be a pity, so I've bought a couple of these whole face jobbies.
Will report back!
I would like to see someone make a screen protector that has a matt black surround and a clear window for the screen plus apperture for the forward facing camera - the silver mirror finish is a bit of a pain when driving in bright sunlight - Mike
robboy said:
I'm also very interested in this
Click to expand...
Click to collapse
No, no residue.
Made a rookie mistake, pealed the backing off the protector and put the protector on my desk thinking it was the backing.
It picked up a lot of dust which I washed off and applied again.
Is a good fit with a couple of marks that would not have been there if it were not for my mistake.
Dark Knight said:
@Ziggyred - Apols dude, but I'm a little cynical about screen protectors which do not show picutres of the actual device I'm interested in.
I ordered the Brando one for the Orbit II, but to my disspointment, despite it being plugged on Brando.hk's website as being Orbit2 compatible, the top of it is not such a great fit. It looks like it's designed specfically for the Cruise, but not the Orbit II.
Can anyone here categorically state (and show!) protectors specifically designed for the Orbit II ?
Click to expand...
Click to collapse
Hi DK - the one I saw on Ebay DOES have apicture showing it is tailored to Orbit 2 if you scroll down the page. But here's a direct link!
http://www.durasec.com/newpage.php?.../catalog/images/4388.gif&breite=325&hoehe=750
Hello all,
Can anyone comment on how well the EXiM deals with fingerprints and smudging ?
Tried washing my original orbit protector today and it looks terrible now.
Nogs
nogs said:
Hello all,
Can anyone comment on how well the EXiM deals with fingerprints and smudging ?
Tried washing my original orbit protector today and it looks terrible now.
Nogs
Click to expand...
Click to collapse
I've used the Exim and the Vikuiti (3M) screen protectors. Both are very good, but I prefer the Exim (although a bit more expensive).
If memory serves, Exim protectors are available in a couple of different versions (different surface characteristics). I got one that is supposed to feel like writing on paper, which I really enjoy.
So what do you mean by "deals with fingerprints..." ? Fingerprints are always an issue ... there's always greasy residue on your skin and that will leave a fingerprint, no matter what. But they are easily wiped off with a lint-free cloth.
Cheers,
Andreas
brando
the brando ones are cheap and excellent. they come with protective backing on both sides, with a "handle" to make removing it easy without messing up the corners.
tip: clean screen with sticky tape before hand. if you miss a speck of dust and notice after putting the protector on, you can peel up the protector by sticking sticky tape on it near the edge and pulling. remove speck and refit.
the brando ones have a really nice, slick, stylus feel. i like them a lot.
I've got the original protector, guess that's Durasec according to an earlier post.
Starting to annoy me more as we get into the summer that I can't see anything on the screen in daylight with the brightness on MAX. Just find the original way too reflective.
Do any of the ones mentioned offer decent anti-reflectiveness? At least better than the original?
Cheers
Kev
exim ultra prodtect have an anti-reflecting surface
vut i didnt test them by myself
ziggyred said:
This one here appears to be a direct replacement of teh one that came with the Orbit when you bought it.
DuraSec for Orbit II - £7.95
http://cgi.ebay.co.uk/DuraSec-HighTec-screen-protector-for-O2-XDA-orbit-2_W0QQitemZ170200489138QQihZ007QQcategoryZ68029QQrdZ1QQssPageNameZWD1VQQ_trksidZp1638.m118.l1247QQcmdZViewItem
Click to expand...
Click to collapse
I dont seem to have got a protector with my o2 orbit 2, should i call o2 and ask for one? do you think they would send me one? and do you think its worth it?(getting one from them)
I personally would say: No!
When I got my device the protector was already installed by the person who tested the mobilphone before. He (or she) did such a good job in installing the protector that I didn't complain about getting a "used" device.
Now, we are approaching towards summer and the sun shines more often. Therefore I can't see anything on the display when I'm outside.
For me that means that in near future I will change the screen protector with a non reflective one (I hope it will help against the mirror around the display too).
So even if you get one, I wouldn't recommend to install it. I tend to install an Exim Ultraprotect within the next few weeks. (Just my 5 cents...)
Edit: Oh, I just noticed that you are living in UK - so maybe you don't have sun problems...
Just to let you know that I bought the Brando Screen Protector for the Diamond2 from Inkino. They even installed it for me which is a bonus. The screen protect is absolutely amazing and is a good as any that I have seen. Do not scrimp on cheap nasty ones that come in multiples in a pack. You only ever need one good one. The Ikino guy showed me a Treo 650 which had a Brando Screen protecter that he had installed when the Treo 650 came out (was I born then ) and it was in a very impressive state. If you are going to install it yourself then they do recommend doing it very slowly and cleaning the screen before-hand is crucial. Common sense I know, but you would be surprised how easy it is to get dust under the protector.
got mines today. 2 pcs, both from Brando. one is the Ultra Clear version.
i've applied the "normal" one for now and i must say it's really cool!
putting it on went pretty much smooth. in the bathroom, where i guess there's less dust, i've cleaned first the screen with a special lotion. then waited until it dried up, after that applied the Brando screen protector as shown in the "instructions".
went OK, only had to start again 2-3 times, then found the right position. went over it with a credit-card while smoothing it out on the D2's screen. it sits very good, no air bubbles and really just a few very small dust pieces at the border of the protector - does not disturb.
so, yes, the Brando screen protectors are really the thing!
now i want only the textured back plate and then i'm really happy!
PS: didn't find the screen-protectors on the romanian market, so had to order them from speedshop.hu (hungary), but eveything went very smooth! in 2 days after the payment
Could you post pictures for me? I'm looking for a screen protector too. Does it cover the whole black part, or just the 3.2 inch screen part?
it covers the display + the black border around. it's actually identical in size with the one delivered in the stock package, the difference in the aspect being the "U" shape around the front camera (the original one is a circle).
I don't get it, mine came with a screen protector.
I think it is quite a good protector,
why are you intersetd in th ebrando protector, didn't yours came with a protector as well ?
well0549 said:
I don't get it, mine came with a screen protector.
I think it is quite a good protector,
why are you intersetd in th ebrando protector, didn't yours came with a protector as well ?
Click to expand...
Click to collapse
yeah, i know. the problem is that i didn't pay enough attention when putting on the screen protector that came in the box and i messed it up (got dust and airbubbles under the protector), so after i've tried to get it clean, i messed it up so bad that it got useless.
this is why i ordered 2 brando's (speedshop.hu has 2 versions) - put on one that is not the "ultra clear" version and now i am happy with it.
When applying the standard screen protector that comes wit the phone, how do you get the screen free from greasy finger prints? If I wipe it with a cloth I just smear it out
Laban said:
When applying the standard screen protector that comes wit the phone, how do you get the screen free from greasy finger prints? If I wipe it with a cloth I just smear it out
Click to expand...
Click to collapse
Use CD/DVD cleaner
I use those: 3M Vikuiti DQC160
http://www.3m-displayschutz.de/dqc160
Scratchproof, crystal clear and very easy to get on and off.
Is a screen protector really important? I used mine, but the dust freaked me out. Can't place it without any dust...
So I removed mine, and now not using anything. Just bought a case.
What do you think?
loadstone007 said:
Is a screen protector really important? I used mine, but the dust freaked me out. Can't place it without any dust...
So I removed mine, and now not using anything. Just bought a case.
What do you think?
Click to expand...
Click to collapse
You should put one, if it is not too late: once your screen is scratched (and it will get scratched, very fast if u use the stylus), you will have to buy a new screen cover (I think it include the digitizer), which will be much more expensive, or live with scratches which will blemish your screen, which are especially bad with TD2: the very high pixel density will cause moiré pattern (rainbow effect) around the scratch and I find that very annoying...
It is not so hard to install, mine was my first attempt at installing a screen protection, and it went flawlessly: just be careful, do not hurry, do not put your fingers on the screen (once cleaned) nor on the sticky face of the protector, and work in a clean, dust free, well lit room. Dust free is hard, but an excellent trick i did found here was to use your bathroom, after a hot shower (keep the water runnnig a long time, and take a shower yourself ) It will ensure YOU are dustfree ;-), but also, more important, water condensation will remove almost all particles in suspension, and you will get very clean air. BTW, better to wear minimal clothes after your shower: clothe fibers is the most common dust/particles....
If you work in such a place, the only difficult thing is to get the screen protector perfectly aligned. I started on the top, got the grid and camera holes aligned, tried to cover the screen from top to bottom, and restarted as soon as I saw the slightest misalignment without letting the screen protector out of my hand (else it is very difficult to repick - that was the only trouble I had after I was too enthusiatic and let it go while there was still a small misalignment.
If you keep calm, and have good hand coordination, 2 or 3 attempts and you will have an invisible screen protector ;-) Oh yes, and start with a clean screen (I cleaned mine with distilled water and a soft microfiber glass cleaning tissue...worked very well....)
Thanks, I'll have to buy one then.
BTW, does a screen protector affect the sensitivity of the screen? Do you have to press slightly harder on the screen to get it to recognize your finger?
loadstone007 said:
Thanks, I'll have to buy one then.
BTW, does a screen protector affect the sensitivity of the screen? Do you have to press slightly harder on the screen to get it to recognize your finger?
Click to expand...
Click to collapse
slightly, yes....on the other hand, it is more slippy, although not enough for my taste when using fingers, but it is an improvement compared to the bare screen. Before I installed the screen protector, it was much too grippy for confortable finger sweep motions imho (clean screen, after a while finger grease act as a lubricant ;-) ).
All in all, weighting the slight decrease in sensitivity against the friction reduction...I prefer my screen with the screen protection, even taking out the protection factor
There's this Zagg product for the TD2, which is invisible. Not really sure about this... I might just get the regular screen protector, and use a silicone case.
I would recommend placing the bottom edge of the screen protector up against the bottom buttons to align it. I managed to get it perfect first time.
I find the supplied screen protector picks up finger prints even worse than the bare screen. Are the after market ones any better?
My reseller did the protective screen installation for me. Did a good job. Did you guys get the free pouch also? I am not sure if the pouch came with the unit or if it was a free gift as a promotion.
What's the difference between different brands of protectors and the original HTC ones? I bought last week branded HTC protectors made exclusively for Diamond 2, their HTC part nr is SP P240, they fit fantastically well.. Are they worse than brands mentioned earlier in the thread?
cassper1 said:
What's the difference between different brands of protectors and the original HTC ones? I bought last week branded HTC protectors made exclusively for Diamond 2, their HTC part nr is SP P240, they fit fantastically well.. Are they worse than brands mentioned earlier in the thread?
Click to expand...
Click to collapse
Those look the same as the orignal, that came with the device.
cassper1 said:
What's the difference between different brands of protectors and the original HTC ones? I bought last week branded HTC protectors made exclusively for Diamond 2, their HTC part nr is SP P240, they fit fantastically well.. Are they worse than brands mentioned earlier in the thread?
Click to expand...
Click to collapse
May be they have some particular features such as "antiscratch" or "washable screeing protector"!
I have also recently bought original one SP P240 and very glad with it!
And never mind, original parts are not worse than other brands!
Seeing as I screwed up the one that came with the TP2, can anyone recommend an alternative?
rb14 said:
Seeing as I screwed up the one that came with the TP2, can anyone recommend an alternative?
Click to expand...
Click to collapse
I just ordered an Exim SPUC one from ebay, £6 with free delivery, always had Exim, never had any problems
been using Brando Antiglare (blue packaging) protectors for years. got one on my TP2 as well.
Also been using Brando Antiglare protectors on my HD. It's the best for me...
Can you guys comment on the change to sensitivity of the touch screen?
Does one have to press stronger with the protector installed?
More misses with the protector? Loss of sensitivity?
Seeing it in the sun will be a real plus for me on the TP2...can a few of you tp2 owners comment if it was with or without a screen protector? Which way was best for the screen clarity?
i a cheap set of 2 from ebay and it dousnt look like the maked had even seen the phone before, it even covers the buttons witch arnt flush lol, anyway i complained and he said that a few people had complaind and there manufacturor was going to make new ones so hopefully they get it right this time
Got a brando anti-glare yesterday (had one many years ago on my SE P900) and while it's a good quality protector, I find the matte texture disperses the colour on the screen, making it look "wet".
For an example of how it looks, smear a wet finger across your screen and notice the colour distortion. That's what I get from the brando anti-glare. It also had a slight crease in it out of the packet, meaning that there is a perpetual air bubble underneath the crease that I cannot smooth out.
Better than the stock one for quality, but a couple of niggles.
I have an EXiM SPUC and a brando ultra-clear on order - hope one of these will be better.
dazultra2000 said:
Got a brando anti-glare yesterday (had one many years ago on my SE P900) and while it's a good quality protector, I find the matte texture disperses the colour on the screen, making it look "wet".
For an example of how it looks, smear a wet finger across your screen and notice the colour distortion. That's what I get from the brando anti-glare. It also had a slight crease in it out of the packet, meaning that there is a perpetual air bubble underneath the crease that I cannot smooth out.
Better than the stock one for quality, but a couple of niggles.
I have an EXiM SPUC and a brando ultra-clear on order - hope one of these will be better.
Click to expand...
Click to collapse
I got this as well, went on really easy, much better than the stock one. Quarintus recommended using a credit card to eliminate bubbles ( http://forum.xda-developers.com/showthread.php?t=520946 ). -Is there nothing that Visa and Maestro can't do?
Yeah I know about using a credit card to get rid of bubbles. The problem is in the area of the crease it sits slightly above the surface of the screen, meaning that air gets underneath it. Only way I could get around it is to try and bend the crease out, but I reckon I'd cause more damage that way!
This one is nice.
http://brando.com.hk/mirror-screen-guarder-for-htc-touch-pro-2_p03394c1050d039.html
For the record, I managed to reapply the original protector.
im planning on buying this one.
has the mirror effect whene turned off.
http://cgi.benl.ebay.be/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=220413290660
daveke0201 said:
im planning on buying this one.
has the mirror effect whene turned off.
http://cgi.benl.ebay.be/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=220413290660
Click to expand...
Click to collapse
thats the same seller i got my protector from that looked nothing like the phone lol, he said hes getting new ones made though and will have them by this week some time.
Hi, im new to this just ordered my TP2 can any1 comment on how good the screen protector is which is supplied with the phone and if its worth buying a better one??
I found the one in the box to be very flimsy and not resistant to scratches at all.
Sure it protects the screen, but it will look very ugly after a very short amount of time.
dazultra2000 said:
I found the one in the box to be very flimsy and not resistant to scratches at all.
Sure it protects the screen, but it will look very ugly after a very short amount of time.
Click to expand...
Click to collapse
Agreed, well worth changing it when you measure the cost of the protector against the cost of the phone
Does anyone have the same problem with this phone that I had with my Diamonds screen protectors, which was the protector peeling off when I put the phone in my pocket?
I had to cut all of the corners off the protector, and the 3-5mm off the top to stop it happening
its paypall, so you dont have to pay it
can any1 confirm this if its any good, worth buying or not??
http://brando.com.hk/mirror-screen-guarder-for-htc-touch-pro-2_p03394c1050d039.html
if not can somebody recommend a similar 1 please??
The TP2 relies on much more touch-screen action than previous T-Mobile HTC devices, e.g. Wing. I am trying to find the pros/cons of using a screen protector for the TP2, but so far, not finding much. Is a screen protector really that important for a TP2? I am ok with not using one, but if one is necessary, can anyone tell me why? I wonder if a screen protector is more of a personal choice than a technical necessity...
I find a screen protector is more of personal preference, i use it for peice of mind so i dont have to be extra careful when using my screen and also when i play music on my tp2 i put it facedown as the speakers are on the back and i have done that before on a previous phone and scratched the screen as there was dirt on the table. also if you put it in your pocket without its cover and you forget about coins or keys in there, you can say goodbye to your nice shiny screen. So i know if the screen ever gets scratched i just peel off the protector ansd put a new one on.
fibrou said:
The TP2 relies on much more touch-screen action than previous T-Mobile HTC devices, e.g. Wing. I am trying to find the pros/cons of using a screen protector for the TP2, but so far, not finding much. Is a screen protector really that important for a TP2? I am ok with not using one, but if one is necessary, can anyone tell me why? I wonder if a screen protector is more of a personal choice than a technical necessity...
Click to expand...
Click to collapse
I've had my TP2 for about three months now and i've not used a screen protector. I'm quite carefull with the device and i use the pouch every time i put it in a pocket.
I'd like a matte screen protector because fingerprints annoy me to no end, waiting on boxwave to make one because when I had the mogul I used those and they were awesome... but uhm yeah I don't think it's necessary if you're careful with it. Most people I know with the iphone don't use one, and the screen seems similar. There's always that chance you leave you phone in your lap and get up and then BANG (yeah that definitely just happened to my Mogul last week) so I keep a screen protector on just in case. Performance wise, I don't notice it being less responsive when I use the protector, but then again I haven't used it without one much... Isn't there a CAB somewhere to boost touch sensitivity? Wonder if it will work on this...
You want to try the full body shield by zagg they are based in utah where i am from and their crap is the best quality and lifetime warranty
The Zagg one is still being developed, I wonder if the bodyguardz one is just as good...
Brando Screen Protector
I ordered the Brando Screen Protector however i noticed TMO TP2 is different from the other ones being sold. I wonder if anyone has been able to make it the Brando Screen protector work with the TMO TP2.
Product Code: MUCSP041200 for the Touch Pro 2
mobile.brando.com
I'm using the stock screen protector that comes with the tmo version. It was kind of hard to fit on the screen because it is so perfectly cut to the size of the screen and plastic all the way around the buttons and earpiece. It's been fine so far, I ordered a couple off ebay when I got the phone but I think I'm gonna just keep the stock one on there.
Clearprotector uses the same "stuff" as Zagg and they have a T-Mobile TP2 version.
Genesis3 said:
Clearprotector uses the same "stuff" as Zagg and they have a T-Mobile TP2 version.
Click to expand...
Click to collapse
I ordered one and I didn't like the fit. It didn't go all the way to the edges. The top and bottom were too short.
I stuck the bundled one back one since it has a perfect fit. Only problem I have is I somehow made to tiny creases/bumps which is causing to small air bubbles on the edge.
I would not use a device like this without a good screen protector. I used to not care until I got a scratch on the screen protector of my last phone from an unexpected drop and scrape. It would have ruined my screen.
The stock screen protector is very good, it just takes a surgon to put it on because it is laser precise and perfectly cut to the screen. I had to use a razor blade to trim about 1 to 2mm off the left edge to get rid of an air pocket that was resting on about a 1mm lip. (I don't suggest trying it if you don't have a steady hand)
But I'm looking at a full body screen protector to put on next. I ordered a rubber snap on cover, but I don't want to ruin the look and feel of the device. And the phone is big enough already - don't want to make it more bulky. I've been seeing one on ebay saying that it's used to coat helicoptor blades and has a lifetime warranty and all that. Just waiting for someone to order one and review it.
phonepunisher said:
I ordered the Brando Screen Protector however i noticed TMO TP2 is different from the other ones being sold. I wonder if anyone has been able to make it the Brando Screen protector work with the TMO TP2.
Product Code: MUCSP041200 for the Touch Pro 2
mobile.brando.com
Click to expand...
Click to collapse
I also got this screen protector from Brando (same model as yours, as far as I can tell) for my T-Mo TP2...and it doesn't quite fit properly -- it's obviously made for the international/original version with the curved chrome trim on the front. That is, it fits on the phone, but the top and bottom of the front outside the screen aren't covered. And I had to trim out the ear-speaker hole on the protector a little because apparently the distance between the bottom-buttons and the ear-speaker are different between the intrntnl and the TMo versions.
Still, I'm using it anyway (even though it looks funky) just so I can protect that beautiful screen...but when/if one is specifically made for the TMo TP2 I'll get that one.
Other than not fitting exactly right, I do like the protector clarity and sensitivity, and I was able to apply it without bubbles.
UPDATE:
OK, I see now that I ordered what I thought was the same protector, but I ordered mine from "shop.brando.com", rather than "mobile.brando.com" -- What's the difference -- more than one brando.com site?? And my product code is different. (SUCSP083500 vs MUCSP041200)
Looking again at the shop.brando.com page for the product I ordered -- 10 days after I ordered it and 3 days after I received it -- that while the T-Mobile version is listed under intended "Models" there's also a footnote saying it's not compatible with the T-Mobile version. I don't think that footnote was there when I ordered it.
I wonder if the version sold at the mobile.brando.com site, Product Code MUCSP041200 really fits the T-Mo TP2? If so, I'll go ahead and order one...or 2.