I've just ordered an MDA Vario and it's going to take a little time to reach me (I'm not currently in the UK). Before it gets here I'm trying to work out which screen protector to buy. Has anyone tried the Invisible Shield protector? The material looks superb and I've read load of good things about their performance on iPods.
My current PDA is a Tungsten T3 and I have a Martin Fields screen protector on it. (MF protector for Wizard here).
I love the MF but am really interested in hearing experiences with the IS if anyone on these forums has tried it.
Yeah i want one too but was wondering, do they leave any marks when you peel them off afterwards? From the glue and stuff?
Quality screen protectors like Martin Fields and the IS should leave nothing behind after they're removed.
I think brando screen protector is not bad too. Im currently using it.
I have change 2 screen protector since I got my wizard.
- Expansys, Cant fit in properly. Bubble occur after stick in.
i've tried 3 different screen protectors, then i used pocketpctechs AG shield and i'm not gonna try anything else. It's perfect, reusable, no glue is used and installation is pretty simple. also it comes with screen cleaners and all that. highly recommended
For me brando's would be ok. I usually have the store person do the application since I can't do it on my own [I messed up 2 protectors when I tried doing it at home]. I'd say choose one that isn't adhesive but static that way no residue is left on the screen when you remove it. also most of them are washable/reusable... if you find a scratch on the side you use most often [i.e. the area along the SIP] just have it removed and re-installed reversed [not the face but the top and bottom].
The Brando ultraclear is OK. If you prefer a non-glossy one, the Brando regular is perfect (you will lose a bit of brightness).
I like www.boxwave.com 's version
They have a anti-glare, and a regular one, they are washable you can remove them and wash them under soap and water and reapply, they come with cloth cleaner, and a little scraper thing that helps get the bubbles out.
Here's a super cheap solution, and it works GREAT for me.
I went to Staples and bought a package of baseball card protector pages that are designed to fit into a 3-ring binder. The size of each card holder is just slightly larger than the screen on the MDA.
What I did was take a straight edge and X-Acto knife and cut a small piece of plastic that is a couple millimeters larger than the screen on each side. I simply tuck the plastic I've trimmed under the lip between the device and screen, and it holds in place just fine.
No adhesive, no mess, easy as pie, and the entire package of plastic sleeves was less than 3 bucks. It will surely last longer than the life of the device.
- Justin
Got my second Brando regular protector (first one wasn't returned when my magician was replaced). Fits perfect, very scratch-resistant & the anti-glare is very useful while navigating in the car.
Cheers, M
fone_fanatic said:
i've tried 3 different screen protectors, then i used pocketpctechs AG shield and i'm not gonna try anything else. It's perfect, reusable, no glue is used and installation is pretty simple. also it comes with screen cleaners and all that. highly recommended
Click to expand...
Click to collapse
Same here.. I have used BoxWave, wich are also very good, but WriteShields from pocketpctechs are great.
I also had an "InvivibleShield" on my 8125 for a couple minutes. I installed it and saw that it was not plum on, so I went to take it off and reinstall.. When I removed it I thought I was going to pull my screen up with the protector. Stay away from those things... I then tested those claims they make on the website, about being indestructible. Pens had no trouble getting through, and scissors went through like soft butter.
$.02
I bought a boxwave and was not happy with the glare free one. I have used them on my Treos and liked them, but the one that came for my wizard sucked. It really blurred the screen and made it look like a prism. Maybe it was defective, but I ended up buying another one from javoedge and I am quite happy with it.
just my $.02
greg
I also got an anti-glare from boxware, it does have issues however I emailed them about it and they are getting a new one that doesn't have the issues and they should have it in about a week. To make it even better they created a gift order for the new one for me.
I've tried a number of the commercial screen protectors in the past and wasn't happy with any of them. Of course, there is the ridiculous cost for a little piece of plastic.
The best solution I have found is to use clear vinyl sheeting that you can find at any fabric store, typically for a couple of dollars US per yard. Just cut to fit your screen, clean your screen, wash your hands and vinyl rectangle with liquid hand soap, shake off as much water as possible (but not all), and attach and smooth out bubbles.
Benefits:
- Minimal screen image degradation as compared to many commercial screen protectors
- No adhesives to gunk up the screen
- Lasts 6 months or so
- Easy to replace
- Costs about a nickle per cover
I also have the pocketpctechs write shield anti-glare.
Comes in a nice kit, can't tell its there when the screen is on.
http://www.pocketpctechs.com/main.asp?unit=Cingular_8125-559&area=home
I bought mine from www.nushield.com, but I haven´t been able to apply the first one to my screen.
I´ve used them on my Handspring Visor Edge and on my Himalaya with very good results, but on the Wizard, I just can´t get it installed. Will keep you posted!
Stefan out
Brando screen protector, Boxwave and Martin Fields are my favorites!
I've heard a lot about this Brando, but it is a bit too expensive for me for a piece of plastic. I think they are selling for GBP7+ in eBay. I wonder, is it so good? I've been looking for those 'card' type screen protector that is ultra easy to apply and bubble free because the protector itself feels like a card. Imagine, since the protector is like a card, it is impossible to get bubble under it. Anyone know where in the net I can get one card type for UK??
BTW, I've bought the 'Sensifilm' protector from eBay. It said many things, but of the two thing, antiglare and antiscractch is 100% bluff. Mine still give me glare and it has been scratched like mad with my stylus. Either the HTC is very bad in designing a stylus, or the screen protector is terribly weak. I think the weak protector is a more likely answer.
30$ for a screen protector. That is so silly. I got a protector for my psp for 6$ and it works great. Geez, pocketpctechs is a rip.
Cant i get some from a local store instead?
I can highly recommend Brando UltraClear too! Easy to attach, not visible when attached carefully, no reduction of brightness - display looks like without one (for those who do not like the reflection of the display: buy the Brando classic).
Regards
Carsten
Related
Does the Invisibleshield cover the whole phone or is it just a screen protector?
It covers pretty much the entire rear and the screen. There is no cover for the 'frame' of the front.
IMHO It's very tough, quite tricky to put on the back (of an XDA Mini S with textured surface) and would have been better if it covered the exposed front parts (but I guess the various button and LEDs get in the way).
Re: Does the Invisibleshield cover the whole phone or the sc
The Invisible shield comes in two styles. One is for the whole phone the other just for the screen. I have a Cingular 8125 with the whole phone style. The kit comes in precut pieces which you apply to various areas of the phone. So it offers a fair amount of protection but does leave some gaps. The screen cover is the best I have ever used.
dropknowledge said:
Does the Invisibleshield cover the whole phone or is it just a screen protector?
Click to expand...
Click to collapse
I had also seen these on Ebay and was wondering if anyone had used it.
The "infomercial" has sold me on it, but I really wanted to get some opinions from others who bought it and used it before I took the plunge.
So, even if just the screen protector does the job, it would be money well spent??
I had also seen these on Ebay and was wondering if anyone had used it.
The "infomercial" has sold me on it, but I really wanted to get some opinions from others who bought it and used it before I took the plunge.
So, even if just the screen protector does the job, it would be money well spent??
newbie2 said:
I had also seen these on Ebay and was wondering if anyone had used it.
The "infomercial" has sold me on it, but I really wanted to get some opinions from others who bought it and used it before I took the plunge.
So, even if just the screen protector does the job, it would be money well spent??
Click to expand...
Click to collapse
Yes, the screen protector is worth the money. I would suggest buying directly from their website. They do not charge for delivery as they do on ebay
invisible shields are THE BEST screen protectors hands-down. I have been using them for ipods, cameras, and all my phones. It's always the first accessory I buy. I'm using one on my 8125.
Easy to put on, doesnt scratch, STRONG, and wont leave a residue if you choose to remove it- which you never will do and it will never come off, either. Plus they have a lifetime guarantee. Highly recommended for any gadgets.
Best piece of gear hands down. I have the "Full Body" on my 8125 and just a screen protector on another. I bought direct since I live here in Salt Lake City, UT. As for somebody saying it never comes off once it is on us untrue. Just respray it and carefully lift an edge and it will come off. :wink:
RE: Does the Invisibleshield cover the whole phone or the s
I just tried to put mine on today, and it didn't cover the entire screen. It's like alot of screen protectors that I've used in that it leaves a 1-2 millimeter gap around the edge. I decided not to use it, and opted to use my WriteShield screen protector that I got from PocketPCTechs. I've tried their AG and C* (clear) screen protectors, and the C* screen protector is the clearest screen protector I've ever seen. And it cover the entire screen of the 8125.
Having said that, I went ahead and put the rest of the InvisibleShield protectors on the rest of my 8125 and I like it. I've got and IS on my IPOD also, and it does a pretty good job.
However, removing is does leave some residue. Like the one for the 8125 the IPOD version comes in multiple sections, and I didn't like the placement of a the pieces that go over the circular sections of the IPOD, so I decided to remove them and maybe try to re-apply them. When I pulled them off, they left a gummy, glue like residue. I did manage to clean it up with some GooBGone. I'm not sure if I'll be able to re-apply those pieces or not since they are not "clear" any more. Maybe there's a way to wash them or something to clean them up.
I may have done something wrong (and if I have, someone please tell me what it was cause I realy like the IS for my IPOD), but I couldn't find anything on their website which gave any instuctions for removing.
Does the 1-2 mm gap around the edge really make a huge difference?
RE: Does the Invisibleshield cover the whole phone or the s
It does to me. Invariably I would always slide of the edge with the pen. Plus it's kinda noticible when you look at it. It's more of a personal thing really. If you're OK with it, then I think the protector that comes with the IS would be a really good one. I just like to have to whole screen covered.
You do know you can order the IS a custom size to fit your needs.
Here's my review of the Invisible Shield, which I installed onto my 8125 earlier this week.
The quality of the material is excellent. I have no doubts this will save my entire phone from bumps and bruises. However putting the stuff on left me hating and liking it at intervals during the "ordeal". Unless one has steady hands and lots of patience it would be nearly impossible to put the pieces on without getting your finger prints on the underside of each piece. The adhesive is seriously good.
I did manage to get all the pieces on, after about 90 minutes. I did have to rinse the screen cover several times in order to clean the underside of smudges left by my fingers. I also had to lift a corner once to take out a bubble that just would not come otherwise. Even at that I was not impressed with how the screen looked immediately after applying it. But now, 4 days later I have to say that the claims of the bubbles working themselves out over time are entirely accurate. The shield is now crystal clear and undoubtedly a good protective device.
The material also has the characteristic of making the phone very grippy. I like that about it. What I don't like so much is that there are many pieces, and you can feel the edge of each one when you hold or handle the phone. This is because the material is thick, and that helps to provide the protection, but it takes some getting used to. The grip can be felt when using the stylus as well, but fortunately the digitizer on the screen is very sensitive so a light touch works well, and this minimizes the drag created by the material.
My final impression is that the kit is worth the money. It will protect the phone from all but the most careless handling, or serious accident. It is nearly invisible and makes for a better, albeit edgy, grip. I wouldn't want to apply it again, but then I shouldn't have to given its toughness. Perhaps next time I'll pay someone else to apply it for me. ;o)
Invisible Shield
FYI. I purchased mine (full cover) for my 8125 at a mall kiosk. They guy asked me if I wanted him to install it as it is tricky.
I have little patience for such things (like airplane models), so I had him install it for $5 extra.
It was WELL WORTH IT!!! The install was top-notch and I am very, very happy.
Could someone post the picture (front, back, side) of the MDA or 8125 with invisibleshield in it. I know that it might be difficult to see it clearly since the shield is almost invisible. Could someone put some arrows in the picture on where the shield is applied. I would like to see which area gets covered before buying it. TIA.
I contacted the seller and asked for the picture. But they don't have it.
Also, once you apply the invisibleshield, can you safely carry the MDA naked in a purse together with all kinds of stuff such as keys, pens, notes, etc?
I'd like to see some photos as well
R
rob61280 said:
I'd like to see some photos as well
R
Click to expand...
Click to collapse
Yea me too but looks like nobody has any picture worth looking
Thought i'd be the first with a which screen protector thread!
Brando do one
Expansys do one
has anyone used either on any device? I don't like the ones that dull the screen by giving a matt like appearance. Does the Brando do this? - I can't remember if it was a brando I used on my p800 that did this but things may have improved since then.
Any suggestions appreciated
thanks
I've used Brado since my SE P800, which the was the old "fuzzy" version. This came off when he introduced the "Ultra Clear" protector. Have one on it's way to fit on my new TyTN. Been using it for my Qtek S100and 2020 as well...love it
Brando Workshop
I'm using the standard K-Jam protector from www.shieldzone.com
You can bang on it with your keys, and you still can't scratch it...
using the brando ultra clear on mine. Its great and virtually not visible. However, it only covers the "screen area" of the today screen. i.e. the part that is displayed and not the entire visible area of the screen. This way, you can still trap dust on the edges which are also not protected. I've heard good things about the exim ultra clear protectors but don't know if it covers the entire screen or just the visible area.
But does the standard K-Jam protector from www.shieldzone.com fit the Hermes? It comes with 16 pieces which cover body and keyboard I think...
Got it for my Zen Vision M and it is fantastic!!! Initially when you apply the film there are small bubbles but they all! go by the next day.
So as long as K-Jam and Hermes are similar sizes... its fine!
Looking at screen protectors the best one according to reviews is the PPC Tech WriteSHIELD???
Ive found it on expansys.co.uk here but am unsure which to go for, crystal clear or anti-glare?!
Any thoughts people?
You may want to check out the JavoEdge screen protector. These things last for ever and they go on easly and quickly. They are non stick, washable removable and re-applyable. They have the antiglare and the ultra clear for the TyTN.
I've been using the JavoEdge protectors for the last year, they are about $10 a pop but well worth it.
On a side note, the ultra clear are very clear... you don't notice the protector at all, but they show every little fingure print. I think I'm going to go back to the antiglare becuase of the fingure prints and the ultra clear make it hard to view outside with reflections.
Kyri said:
But does the standard K-Jam protector from www.shieldzone.com fit the Hermes? It comes with 16 pieces which cover body and keyboard I think...
Got it for my Zen Vision M and it is fantastic!!! Initially when you apply the film there are small bubbles but they all! go by the next day.
So as long as K-Jam and Hermes are similar sizes... its fine!
Click to expand...
Click to collapse
The K-Jam and Hermes have identically sized screens, so the screen shield will fit. The rest of the kit will not.
Incidentally, I've removed my shield... I just didn't like the "feel" of it. If someone has a suggestion for a screen protector that not only is invisible but also "feels" invisible, I'd like to know about it...
goestoeleven said:
Incidentally, I've removed my shield... I just didn't like the "feel" of it. If someone has a suggestion for a screen protector that not only is invisible but also "feels" invisible, I'd like to know about it...
Click to expand...
Click to collapse
Try the JavoEdge Ultra Clear. You can't see it or feel it. But be warned with the ultra clear it will show every single fingure print and smug just as if there was nothing on the screen and you will be wipping your screen constantly. The antiglare has a rough textture to it but it also hides all the little fingure prints.
I had the antiglare on my JasJar and loved it. When I ordered one for my TyTN i didn't relize I ordered the ultra clear. The screen is very beautiful since you don't see the protector but man I must wipe down my screen 5-10 times a day now. I'm going to try the antiglare on the TyTN to see how I like it, but the down side is now that i see how nice the screen is with the ultra clear I may not be able to handle the antiglare.
The JavoEdge screen protectors have been by far the best I've ever used. My last one was on my Jasjar for about a year (I sold my JasJar when I got the TyTN and it still had the same protector) and it still never showed any scratches or lines from using the stylus.
Here is a link to the TyTN screen protectors
http://www.javoedge.com/reflexeshop/productCatalog/viewByBrandModel.do?brandId=21&modelId=567
My favorite is MFOP. 3 years on SE P800 w/o any problem. Ordered one for TyTN in advance and put at the first day.
tytn specific from shieldzone
screen only:
http://www.shieldzone.com/form/index.html?preadd=action&key=HTCTYTN
$10
full:
http://www.shieldzone.com/form/index.html?preadd=action&key=HTCTYTNF
$25
i don't have one for my tytn yet (in fact, i don't have my tytn yet - arrives thu/fri) - but i've used the invisible shield (shieldzone) for some other stuff i have (camera, palm) and as stated earlier, it's pretty good.
I like the Martin Fields protector - pretty much invisible and washable/reuseable.
gigglegaggle said:
screen only:
http://www.shieldzone.com/form/index.html?preadd=action&key=HTCTYTN
$10
full:
http://www.shieldzone.com/form/index.html?preadd=action&key=HTCTYTNF
$25
i don't have one for my tytn yet (in fact, i don't have my tytn yet - arrives thu/fri) - but i've used the invisible shield (shieldzone) for some other stuff i have (camera, palm) and as stated earlier, it's pretty good.
Click to expand...
Click to collapse
Anyone know if this would fit the MDA Vario II?
Brando
Hi I have a question about the Brando screen protectors, what do people mean when they say it does not cover the whole screen? does it only cover a portion of it? or does it cover all of the screen?
thanks,
Mike
A few weeks ago i orded some boxwave clear protectors. all four corners where bended and cracked( two protectors). It seems boxwave has a bad batch, because have read others story's about corners that doesn't stick on the screen ( bended).
I did send them back and waiting for RMA.
The boxwave ones where for my Dell Axim X51v.
On my TyTN i use Brando anti glare protectors and i'm very happy with them, they fit perfect and easy to apply.
So i orded brando's crystal clears for my Dell and TyTN. Yesterday i placed them on both devices and they are also like the anti glare ones, just perfect.
high quality, the correct size( fit the whole screen without a spot unprotected) and are very clear. I don't notice them on my screen.
A big diference with the anti glare ones.
I don't say that boxwaves are less in quality, but with my brando's i didn't had any issues.
I use PPCTechs AntiGlare (AG) Write shield. A bit expensive but very good.
I use EXIM SPUC screen protector on my tytn/jasjam.
ultra clear glass like finish, not the anti-glare version, but this is my personal choice. EXIM also have AG version as well.
Here is a review of the one im using
http://www.mtekk.com.au/tabid/54/articleType/ArticleView/articleId/561.aspx
Proporta
best one is from Proporta - just excellent
richard d said:
I like the Martin Fields protector - pretty much invisible and washable/reuseable.
Click to expand...
Click to collapse
What does "Washable" really mean? Take it off, run it under water, let it dry and reapply? For some reason, I don't think it will work.
One explaination of "washable"
anubus12 said:
What does "Washable" really mean? Take it off, run it under water, let it dry and reapply? For some reason, I don't think it will work.
Click to expand...
Click to collapse
I just got a few different screen protectors from http://www.bestskinsever.com/servlet/the-11/T-dsh-Mobile-MDA--fdsh--Cingular/Detail a few weeks ago.
I have had several different manufactures of screen protectors befor this one. All of the other screen protectors were easily scratched. And, if you ever got any liquid on them, they would haze up. So, you ended up replacing them very often (which was why the usually come in a 12 pack )
However, the screen protector from Best Skins I haven't gotten a single scratch that I couldn't get out with a micro-fiber cloth. During a vacation recently (where the 8525 was the GPS), I had several times when I got a little sunscreen or lotion transfer from my fingertip to the screen. With the old screen protectors, that would be it. They would smudge and streak, and I'd have to replace them. With this new "washable" screen, a little water (or let's face it--spit ) on the micro-fiber cloth and it was good as new.
So, that's what I think they mean by washable. I don't think mine could survive being pulled off. But, I don't think I'm going to have to any time soon.
Has anybody every used this brand of screen protector's before? They just sent me an email saying that they have in stock screen protectors specific for the T-mobile TP2 and I am debating whether or not to buy them.
http://www.boxwave.com/products/cle...screen-protector-t-mobile-touch-pro2_3668.htm
I originally had a Martin Fields on my Touch Cruise that I loved, but they don't make the screen protectors for the T-mobile TP2
I used one on my MDA (prior to getting the TP2). I loved it (make sure to get the crystal clear, not the non-glare, if they have a choice). 3 years and looks like new, nice slick surface for using the stylus, extremely durable. But I don't have experience with any others (except the one that came in the TP2 box which I also like a lot).
Thanks for sharing!
I´ll go for one of those
The crystal clear is one of the best I've used before!
I have used the Anti-Glare version for my 6700 and 6800/Mogul and love it. I used my phone in my car alot so the Anti-Glare is a must. It also finger print resistant, I'm using the screen protector that came with the phone now and the finger print smudges are just driving me nuts! I've order one and is waiting for shipment notice.
the Anti-Glare version is a semi reigid piece of plastic that make it very easy to apply, similar to the included protector, I hate those soft floppy protector that's next to impossible to put on correctly
bitslizer said:
I have used the Anti-Glare version for my 6700 and 6800/Mogul and love it. I used my phone in my car alot so the Anti-Glare is a must. It also finger print resistant, I'm using the screen protector that came with the phone now and the finger print smudges are just driving me nuts! I've order one and is waiting for shipment notice.
the Anti-Glare version is a semi reigid piece of plastic that make it very easy to apply, similar to the included protector, I hate those soft floppy protector that's next to impossible to put on correctly
Click to expand...
Click to collapse
is the anti glare version kinda gritty to the touch ive never used one?
osrix25 said:
is the anti glare version kinda gritty to the touch ive never used one?
Click to expand...
Click to collapse
Was wondering this as well. I ordered a Clear Touch while my co-worker opted for the anti-glare. I'll try to do a side by side comparison when they arrive.
bitslizer said:
I have used the Anti-Glare version for my 6700 and 6800/Mogul and love it. I used my phone in my car alot so the Anti-Glare is a must. It also finger print resistant, I'm using the screen protector that came with the phone now and the finger print smudges are just driving me nuts! I've order one and is waiting for shipment notice.
the Anti-Glare version is a semi reigid piece of plastic that make it very easy to apply, similar to the included protector, I hate those soft floppy protector that's next to impossible to put on correctly
Click to expand...
Click to collapse
Speaking of anti-glare... im using one on my Iphone 3G..got it back from Manila,Philippines on my last holiday, some chinese brand screen that i thought will be just a piece of crap screen protector.
to my surprise it was 98% perfectly fit on my iphone...and it was a great anti-glare screen protector. my wife likes it now she wants 1 for the htc touch pro2. ive seen some on ebay i might order it this week.
for those who's using one... where did you guys buys the anti-glare screen protector?? -thanks
Arcarsenal said:
Was wondering this as well. I ordered a Clear Touch while my co-worker opted for the anti-glare. I'll try to do a side by side comparison when they arrive.
Click to expand...
Click to collapse
Nice one thanks
I've raved about it before many times, just search my posts on here and PPC geeks, but the BoxWave AntiGlare is the best screen protector for any device hands down period end of story etc!
osrix25 said:
is the anti glare version kinda gritty to the touch ive never used one?
Click to expand...
Click to collapse
I wouldn't say gritty, but its definitely neither frictionless or sticky and doesn't impede your fingers or stylus movement in anyway... its got a matted texture, and I really like using my stylus with that texture! more of a paper feel, offering just the right amount of feedback and friction.
You do lose a tiny bit of clarity compare to the Crystal version, but for the anti-glare, anti-finger print benefit, I love it!
finger prints and face oil on the stock screen protector have been driving me nuts!
I'm supposed to get it today but heading out of town for a wedding this weekend so may not have a chance to report or upload pix until monday
Thanks for the report, i can imagine a paper texture! i think i may order one. cheers
What do you all think of these dedicated screen protectors, as compared to using the screen cover provided by invisibleSHIELD or Bodyguardz? Are the ones you all mentioned, or from "BoxWave" better because they are made specifically for the purpose of screen protection? Or are the I.S. or Bodyguardz ones comparable, since they are built to offer all around protection?
venomshot629 said:
What do you all think of these dedicated screen protectors, as compared to using the screen cover provided by invisibleSHIELD or Bodyguardz? Are the ones you all mentioned, or from "BoxWave" better because they are made specifically for the purpose of screen protection? Or are the I.S. or Bodyguardz ones comparable, since they are built to offer all around protection?
Click to expand...
Click to collapse
Personally, the 3M crowd is better because then you don't have to worry about the screen protector getting scratched.
I had purchased a Boxwave Anti-Glare before and it worked decently, but the amount of glare it reduced was negated by the amount of brightness that needed to be increased.
Boxwave, in my opinion, works if you have a case protecting it. But trying doing this with a Boxwave.
osrix25 said:
is the anti glare version kinda gritty to the touch ive never used one?
Click to expand...
Click to collapse
NOT gritty.
I have used Boxwave screen protectors for years and have NEVER been disappointed. Excellent longlasting product that your stylus simply glides across; I have settled on the Anti-Glare. One post says that Boxwave isn't TOTALLY scratch-free like some other 'full-body' clear protectors. Correct. However, personally I do not like the idea of spraying a liquid all over my device in the application process. 'Full-body' protectors are applied just like installing tinting on you car's windows.
Suggested application procedure.
Before beginning I have two clean microfiber cloths; one is included. Clean your phone's screen well; preferably w/one of those microfiber cloths. Close windows in bathroom, run shower on hot a bit & turn off. Moisture will pull all the dust outta the air and drag it to the floor. Vent heat (u don't want it to be uncomfortable in there).
Now that all the floating dust is negated, clean your screen again w/the the other microfiber cloth and apply protector. It is helpul to have some tape applied to a corner or two of the protector. Utilizing the tape, lift and reapply as needed using the supplied squeegee or a credit card to clear out bubbles; you may need to lift protector and use the microfiber cloth to pick up some lint/debris to ensure a clean install.
You should have a lint- and bubble-free application if you were careful.
Good luck from Lincoln!
I just got the new Boxwave ClearTouch Crystal screen protector for my T-Mobile TP2: http://www.boxwave.com/products/cle...screen-protector-t-mobile-touch-pro2_3668.htm
I had previously had a Boxwave on my MDA. That has lasted 3 years with no signs of wear, and I was extremely pleased with the fit and feel, so was hoping to do the same for my TP2. I researched all of the competition and read many forum posts on the subject. My main criteria were:
1) quality
2) exact fit
3) feel with finger and stylus
4) longevity
Price was less of a concern as I am hoping I will only ever need just the one for my TP2 (if my previous experience with the MDA is anything to go by), and so the lower priced ones, or the ones that came with 2 or 3 in the pack, were not a strong selling point for me.
The other main one I narrowed it down to was the Bodyguardz, and I probably would have got that if the Boxwave hadn't been coming out soon.
Boxwave advertised pre-orders were available for October 9th shipping. I searched high and low but couldn't google a single coupon code, so ended up paying full price of $12.95 + $2.50 shipping. They shipped a day or so late, and because of the long holiday weekend it arrived a little later than it probably could have, but as far as shipping, packaging, tracking go, I give Boxwave an A-
I had actually been perfectly happy with the screen protector supplied by HTC, but as others have noted, in some cases it may have been a tiny bit too large, causing bubbles along one edge. I think I had put it on pretty perfectly, but then, in my obsessive need for perfection, had pulled it off a little and proceeded to snip away too much screen in an attempt to get it to fit just right, making for an install that now looked a bit messy and with a bit of glass exposed along a jaggedy edge of protector. But the Boxwave fit perfectly, and very easily, just using the instructions on the package (i.e. I just put it on dry, no sprays or water). I did steam up the kitchen a bit first to try to remove dust, and obsessively cleaned the screen for 10 minutes before attempting the install. On my first attempt I started from the short top edge and that caused a problem as the protector was now not aligned correctly down the right side, so I pulled it up and laid it down again from the long left edge, making for a much easier alignment. However, when I had pulled up the protector from the first attempt, I had used the little plastic card to ease up the protector; I think I caused some very minor damage to the protector at the point of contact, as there is now a tiny minor bubble there that is probably caused by a kink I may have made in the plastic. I'll work on smoothing that out, but it's off the screen and very minor (however, let that be a warning to others to be extremely careful if you need to lift the plastic off. I tried using sticky tape but the suction was too strong for it to get a grip, and using something like a pin seemed like potential to damage the screen.) For fit and finish and ease of installation, I give Boxwave an A (and me a B- )
The surface of the 'Crystal' clear screen (I don't know how different the 'anti-glare' version would be) is very slick. In fact looking at it, touching it, sliding my finger across it, and using the stylus on it, seems exactly the same as the actual glass screen on the phone. I went into notepad and made a new note so I could doodle with the stylus. With almost no pressure I could draw lines about 90% of the time, the rest it would skip a little. But with just a tiny amount of pressure, about what you would probably use in normal use, it was at 100% coverage, with practically no drag feeling, just a nice slippery but not too slippery feel. Sliding with my finger is fantastic, I can now scroll through the programs screen much easier than I did with the original HTC. For sensitivity and surface texture I give it an A+
Overall I give Boxwave and the Cleartouch an A+. I am reminded of that old Memorex commercial 'Is it real, or is it Memorex', because looking at the phone right now, I can't tell it has a screen protector, it looks just like glass. I am sure there are others out there as good, although I doubt there are any much better. There are certainly other quality ones that are much cheaper, $15 seems like a crazy price to pay for a piece of plastic. Others come with 2 or 3 protectors, and many have coupon codes you can find on Google. And others, like Bodyguardz, come with a solution for complete protection, not just the screen. Of course time will tell, but based on my A+ experience with Boxwave on my MDA, I really am quite confident of the same longevity and performance on the TP2.
One happy customer.
I've used Boxwave screen protectors and accessories for the past several years, and I can honestly say I've been always 100% pleased. I've used both the antiglare and clear protectors, and prefer the clear ones - but it's all a matter or preference, but overall a good purchase.
First, Boxwave screen protectors have always been my standard. I've tried a couple other types (mostly what's been included with devices or what I can find in retail stores) and won't likely be messing around with that again. I personally prefer the "crystal" models over the anti-glare because I didn't like the affect of the anti-glare pattern on the display. It kind of gave it a fuzzy moire pattern. The crystal basically looks like those super glossy laptop screens - looks great in low/medium lighting but could be a problem in certain direct light situations. Still, the trade-off is worth it to me.
Second, does anyone know if any of the existing TP2 protectors will fit the AT&T Tilt 2? The European/UK model looks not ideal because of the front camera hole and the T-mobile version appears to have a slightly different button layout on the bottom. Both the Verizon and Sprint models look right to me on the web page, but Boxwave support just says to submit a request and wait. I would prefer to get a protector on mine ASAP but am reluctant to order if the fit isn't right.
Daniel
bought one for my Sprint Touch Pro 2, it applied perfectly and not noticeable at all. I prefer it way over the invisibleshield I had on my Vogue which was too rubbery and reflective.
Am I correct to think the Boxwave screen protector for the Sprint TP2, Verizon TP2, and the ATT Tilt 2 are the exact same thing? I have been looking at pictures and the screen shapes look identical. The only different ones are the T-mobile and the front facing camera versions.
Thanks!
I don't see that screen protectors have been discussed recently, so I'm looking for suggestions/experiences for screen only protectors (I'm a flip case kind of gal, so I have no worries about the body).
I'm one of those weirdos who is very careful (and lucky) with cell phones, so I'm looking for something with minimal interference with the screen sensitivity. I'm defecting back after 2 years of using an iPhone without a single scratch on the screen (nor are there any scratches on my 8525 or my Treo or the 8125) in spite of extensive use, and I'm already loving being able to use my fingernails again
I'll greatly appreciate any suggestions/experiences on what's worked well . . . or what hasn't worked. Ease of application is a plus as my 8525 to this day has a tiny bubble I never was able to eliminate . . .
Also, I hope this is an appropriate place to express my gratitude for this forum. When I found it, I was vacillating between the Tilt 2 & the LG eXpo, and comments here nudged me into my decision: I brought my Tilt 2 home yesterday
TIA!
The screen protectors that AT&T sell for the Tilt 2 work really well, are easy to apply, and are a good deal (3 for $10).
I briefly used the AT&T-supplied screen protector. I switched to an eBay full-body protector, but was unhappy with the way it was cut - didn't fit the Tilt2 very well. I replaced that with the BodyGuardz full body protector and it's a much better fit. I recently removed the BodyGuardz screen protector (but still using the body protector) and installed an anti-glare screen protector from Boxwave.
I had no complaints about screen sensitivity with any of them. The original AT&T screen protector and the one from Boxwave feel "slick", are a more rigid plastic and they didn't really adhere to the screen very well around the edges. The ebay one and the BodyGuardz feel a bit "rubbery", adhere better to the screen and any bubbles will work themselves out after a day or so.
I don't really have a preference one over the other - for me it came down to a preference for a less glossy screen.
Hy! You can try and have a look about what other are saying here http://forum.xda-developers.com/showthread.php?t=605241 or here http://forum.xda-developers.com/showthread.php?t=571172 or here http://forum.xda-developers.com/showthread.php?t=594029
In short, there are 3 majors options:
Zagg's Invisible Shield - found here http://www.zagg.com/invisibleshield/htc-tilt-2-cases-screen-protectors-covers-skins-shields.php
Bodyguardz - found here http://www.bodyguardz.com/content/accessories/1-12--2393.htm
Gadget Shieldz - found here http://www.gadgetshieldz.com/att-ti...nvisible-shields-screen-protectors-skins.html
The main difference between them is the price, the first 2 cost 25$ each, but Bodyguardz offers 2 kits and both sellers offer lifetime warranty, third is pretty much the same but whitout the fancy package and alot more cheaper.
Try reading all the topic's I gave you and you will find some discount coupons for each seller. The rest is up to you to decide which one suits you better!
Cheers!
Check out WMExperts store
@ sslund,
I can totally appreciate your minor obsession over the "right" screen protector for your device. When I first recieved my TP2, I was using the crappy Rocketfish iPhone screen protectors that I would cut to size. They provided good scratch protection but there was a lot of color separation, meaning they kind of scintillated a red-green pattern over the display which sucked. I then tried the ATT's offering which I didn't like either.
On a whim I bought these from WMExperts Store and have been very happy with them. I cannot post the link as per forum rules, but search their site for "Smartphone Experts Screen Protectors (3-Pack) for AT&T Tilt2"
They do not scratch unlike some of the cheaper Fellows products, nor are they really even noticeable. They are removable, washable, and can be reapplied, which I've successfully done - as long as you're patient in the drying process so as to not get dust stuck to them (air dry), re-application actually works! I did have to cut the sides down a bit as it was just a hair too wide, but that's more of a personal preference. Since they are removable, I've only used one of the three since I got my TP2 in October.
Of course YMMV, but given em a shot and good luck!
I really like my body guardz. thicker and doesnt have a smuge if i touch it like the one that came with the phone.
I would like to install a new shield on my screen but I can't tell if the original is removable and what the recommended method of removal would be if it is.
Clarivue ultra clears are REALLY nice and clear and tough. They come two to a pack. I cought some from a guy on ebay for like $9 shipped. They were real retail clarivues.
WillardZ said:
I would like to install a new shield on my screen but I can't tell if the original is removable and what the recommended method of removal would be if it is.
Click to expand...
Click to collapse
If you are referring to the flimsy protective film that ships on the device? It is removable. Otherwise you would need to try and look through the message that is pre-printed on it.
If you mean the protector that is shipped in the box, well that is also removable if you have attached it.
If you mean ANY screen cover, then the answer is still yes. They are all removable.
Use your finger nail, a toothpick, a credit card, or similar device to pry it off of the screen.
Very simple and rudementary.
So as many of you may have noticed during your uses with the nook in either bright lighting, in the car, or straight up outside (to cold for that here), the glare on the screen can get quite bad. So i was looking online for a decent antiglare for the NT or NC and i stumbled across this:
http://www.amazon.com/gp/product/B004MC4KF8/ref=fb_lfb_prodpg_0
A cheap, 2 pack with stylus, antiglare screen protectors. Now im not going to claim its the best one on the market, but if your looking for a cheap one, then go with this. It has been working very good on my NT, and it makes the screen feel silky smooth, not to mention severely reduces the nasty grease lines from my fingers.
Also, the stylus was actually surprisingly good. I've used numerous ones (cheap ones, for sure, but still multiple) styluses and this is easily the best one I've found. Nice and solid with a reactive tip that doesn't grip the screen or seem like it will fall off.
I can second this I actually purchased the same thing like a week ago. I love my protector its real nice and the stylus is pretty good. A little too sensitive with the app drawer (it likes to open apps when trying to turn the app pages) but other than that its perfect!
Just received this today and I must concur...a quality screen protector and stylus! I purchased my wife the Caseen case also and we've been really happy with it as well.
I purchased the official B&N anti-glare screen protector for $20 (eek!). I got it mainly because my daughter somehow manages to get food and who-knows-what-else on the screen. B&N says not to use moisture when cleaning the screen, but that's the only way to get the crud off. So, I got the B&N protector.
Anyway, despite comments online about people destroying both sheets in the process of installing them, I installed mine without any problems. First I made sure the screen was completely clean with absolutely no dust on it. Then I peeled back just an inch or so of the removable film, pushed the top edge of the sheet to where the case meets the screen, then slowly peeled back more as I pushed the sheet onto the screen, by bending the sheet as I worked my way down the screen. No air bubbles. No dust. No dirt. It's perfect and it looks like it will last forever.
I've got the glareshatter screen protector, its fantastic. That metal stylus is fantastic too. Do yourself a favor and hit up your local auto parts store and pick up a microfiber cloth, keep it on hand for cleaning. Also a little white vinegar on the microfiber does the job nicely.
Sent from my BNTV250 using xda premium
Hey Guys,, i am thinking of getting the above,,, i read in the forum some of the screen protector is causing harm to the screen....
is this case with this screen protector also???
Can somebody show some light on it.
Cheers!!!!!!!!!!
I bought the Import version of the Caseen Glareshatter for under $10 on ebay. Never owned the Caseen's standard protector, so I can't compare.
This is what I like:
Easy to install - it's about 2mm narrower than the screen
The feel is about perfect
Glare is definitely reduced though you still have to compensate when it's extreme
The fingerprints are there but only vivilbe from an angle with the screen off. They don't affect the visibility with the screen on.
Thing I don't like:
Makes the screen darker which is especially noticeable on the white background. I had to increase the brightness about 10% to compensate for it.
Only had for a couple of days but I am very happy so far.
Any idea where to get those in Europe? I could only find shops in the US carrying them (on ****ingly high shipping rates).
I trusted you guys and got the Glareshatter screen protectors. They really make a huge difference. Installation is really easy, just be sure to clean the screen first.
so is this glareshatter version truly the best then?
Just alittle weary on how it effects the clarity. Since some of those amazon reviews mention it.
Citizen Toxie, I was a little worried about that, too. But honestly, it's really hard to tell there's even a screen protector installed. I haven't tried any other brands, because I've really been satisfied with the import Glareshatters.
So you haven't seen it make the screen darker then? I usually keep my screen at 50%, so I'm hoping it looks the same.
If so, I will probably just grab that one.
I had my system brightness set to 30% before installing the screen protector, and I haven't changed it since.
gotcha. thanks.
guessing you grabbed the import one off ebay then?
http://www.ebay.com/itm/caseen-Nook...?pt=US_Tablet_Accessories&hash=item4cfc1c766b
nevermind. all good now.
I actually got mine off Amazon in a packaged deal with a stylus. They're also available on Caseen's official website I think, so see where you're able to get the best deal after shipping and everything.
Only 11 bux for 2 of the Glareshatters and a stylus on amazon. Pretty sweet deal.. ordering one now!
I asked someone who had used an antiglare screen protector if he recommended it and he said no because it significantly darkened the screen.
I went into B&N because my tablet was dead in the water, would not turn on at all and had to be swapped out. I asked to get an anti-glare screen protector there and he pulled one out and said they are normally $20, but because they came with a cloth inside that apparently damaged the screen or the screen protector confused that they were giving them away... Not sure if this is true or still available if so, but just thought I'd share. Made me happy!
Interesting. Wondering if that's worth a trip.
Decided I'm just going with the B&N one, since I don't really need the anti-glare.
Has anyone came across a good privacy screen protector, or something that cuts down the viewing angle quite a bit?