Antiglare Screen Protector and Stylus - Barnes & Noble Nook Tablet

So as many of you may have noticed during your uses with the nook in either bright lighting, in the car, or straight up outside (to cold for that here), the glare on the screen can get quite bad. So i was looking online for a decent antiglare for the NT or NC and i stumbled across this:
http://www.amazon.com/gp/product/B004MC4KF8/ref=fb_lfb_prodpg_0
A cheap, 2 pack with stylus, antiglare screen protectors. Now im not going to claim its the best one on the market, but if your looking for a cheap one, then go with this. It has been working very good on my NT, and it makes the screen feel silky smooth, not to mention severely reduces the nasty grease lines from my fingers.
Also, the stylus was actually surprisingly good. I've used numerous ones (cheap ones, for sure, but still multiple) styluses and this is easily the best one I've found. Nice and solid with a reactive tip that doesn't grip the screen or seem like it will fall off.

I can second this I actually purchased the same thing like a week ago. I love my protector its real nice and the stylus is pretty good. A little too sensitive with the app drawer (it likes to open apps when trying to turn the app pages) but other than that its perfect!

Just received this today and I must concur...a quality screen protector and stylus! I purchased my wife the Caseen case also and we've been really happy with it as well.

I purchased the official B&N anti-glare screen protector for $20 (eek!). I got it mainly because my daughter somehow manages to get food and who-knows-what-else on the screen. B&N says not to use moisture when cleaning the screen, but that's the only way to get the crud off. So, I got the B&N protector.
Anyway, despite comments online about people destroying both sheets in the process of installing them, I installed mine without any problems. First I made sure the screen was completely clean with absolutely no dust on it. Then I peeled back just an inch or so of the removable film, pushed the top edge of the sheet to where the case meets the screen, then slowly peeled back more as I pushed the sheet onto the screen, by bending the sheet as I worked my way down the screen. No air bubbles. No dust. No dirt. It's perfect and it looks like it will last forever.

I've got the glareshatter screen protector, its fantastic. That metal stylus is fantastic too. Do yourself a favor and hit up your local auto parts store and pick up a microfiber cloth, keep it on hand for cleaning. Also a little white vinegar on the microfiber does the job nicely.
Sent from my BNTV250 using xda premium

Hey Guys,, i am thinking of getting the above,,, i read in the forum some of the screen protector is causing harm to the screen....
is this case with this screen protector also???
Can somebody show some light on it.
Cheers!!!!!!!!!!

I bought the Import version of the Caseen Glareshatter for under $10 on ebay. Never owned the Caseen's standard protector, so I can't compare.
This is what I like:
Easy to install - it's about 2mm narrower than the screen
The feel is about perfect
Glare is definitely reduced though you still have to compensate when it's extreme
The fingerprints are there but only vivilbe from an angle with the screen off. They don't affect the visibility with the screen on.
Thing I don't like:
Makes the screen darker which is especially noticeable on the white background. I had to increase the brightness about 10% to compensate for it.
Only had for a couple of days but I am very happy so far.

Any idea where to get those in Europe? I could only find shops in the US carrying them (on ****ingly high shipping rates).

I trusted you guys and got the Glareshatter screen protectors. They really make a huge difference. Installation is really easy, just be sure to clean the screen first.

so is this glareshatter version truly the best then?
Just alittle weary on how it effects the clarity. Since some of those amazon reviews mention it.

Citizen Toxie, I was a little worried about that, too. But honestly, it's really hard to tell there's even a screen protector installed. I haven't tried any other brands, because I've really been satisfied with the import Glareshatters.

So you haven't seen it make the screen darker then? I usually keep my screen at 50%, so I'm hoping it looks the same.
If so, I will probably just grab that one.

I had my system brightness set to 30% before installing the screen protector, and I haven't changed it since.

gotcha. thanks.
guessing you grabbed the import one off ebay then?
http://www.ebay.com/itm/caseen-Nook...?pt=US_Tablet_Accessories&hash=item4cfc1c766b
nevermind. all good now.

I actually got mine off Amazon in a packaged deal with a stylus. They're also available on Caseen's official website I think, so see where you're able to get the best deal after shipping and everything.

Only 11 bux for 2 of the Glareshatters and a stylus on amazon. Pretty sweet deal.. ordering one now!

I asked someone who had used an antiglare screen protector if he recommended it and he said no because it significantly darkened the screen.

I went into B&N because my tablet was dead in the water, would not turn on at all and had to be swapped out. I asked to get an anti-glare screen protector there and he pulled one out and said they are normally $20, but because they came with a cloth inside that apparently damaged the screen or the screen protector confused that they were giving them away... Not sure if this is true or still available if so, but just thought I'd share. Made me happy!

Interesting. Wondering if that's worth a trip.
Decided I'm just going with the B&N one, since I don't really need the anti-glare.

Has anyone came across a good privacy screen protector, or something that cuts down the viewing angle quite a bit?

Related

Screen Protector - advice sought on choosing one.

I've just ordered an MDA Vario and it's going to take a little time to reach me (I'm not currently in the UK). Before it gets here I'm trying to work out which screen protector to buy. Has anyone tried the Invisible Shield protector? The material looks superb and I've read load of good things about their performance on iPods.
My current PDA is a Tungsten T3 and I have a Martin Fields screen protector on it. (MF protector for Wizard here).
I love the MF but am really interested in hearing experiences with the IS if anyone on these forums has tried it.
Yeah i want one too but was wondering, do they leave any marks when you peel them off afterwards? From the glue and stuff?
Quality screen protectors like Martin Fields and the IS should leave nothing behind after they're removed.
I think brando screen protector is not bad too. Im currently using it.
I have change 2 screen protector since I got my wizard.
- Expansys, Cant fit in properly. Bubble occur after stick in.
i've tried 3 different screen protectors, then i used pocketpctechs AG shield and i'm not gonna try anything else. It's perfect, reusable, no glue is used and installation is pretty simple. also it comes with screen cleaners and all that. highly recommended
For me brando's would be ok. I usually have the store person do the application since I can't do it on my own [I messed up 2 protectors when I tried doing it at home]. I'd say choose one that isn't adhesive but static that way no residue is left on the screen when you remove it. also most of them are washable/reusable... if you find a scratch on the side you use most often [i.e. the area along the SIP] just have it removed and re-installed reversed [not the face but the top and bottom].
The Brando ultraclear is OK. If you prefer a non-glossy one, the Brando regular is perfect (you will lose a bit of brightness).
I like www.boxwave.com 's version
They have a anti-glare, and a regular one, they are washable you can remove them and wash them under soap and water and reapply, they come with cloth cleaner, and a little scraper thing that helps get the bubbles out.
Here's a super cheap solution, and it works GREAT for me.
I went to Staples and bought a package of baseball card protector pages that are designed to fit into a 3-ring binder. The size of each card holder is just slightly larger than the screen on the MDA.
What I did was take a straight edge and X-Acto knife and cut a small piece of plastic that is a couple millimeters larger than the screen on each side. I simply tuck the plastic I've trimmed under the lip between the device and screen, and it holds in place just fine.
No adhesive, no mess, easy as pie, and the entire package of plastic sleeves was less than 3 bucks. It will surely last longer than the life of the device.
- Justin
Got my second Brando regular protector (first one wasn't returned when my magician was replaced). Fits perfect, very scratch-resistant & the anti-glare is very useful while navigating in the car.
Cheers, M
fone_fanatic said:
i've tried 3 different screen protectors, then i used pocketpctechs AG shield and i'm not gonna try anything else. It's perfect, reusable, no glue is used and installation is pretty simple. also it comes with screen cleaners and all that. highly recommended
Click to expand...
Click to collapse
Same here.. I have used BoxWave, wich are also very good, but WriteShields from pocketpctechs are great.
I also had an "InvivibleShield" on my 8125 for a couple minutes. I installed it and saw that it was not plum on, so I went to take it off and reinstall.. When I removed it I thought I was going to pull my screen up with the protector. Stay away from those things... I then tested those claims they make on the website, about being indestructible. Pens had no trouble getting through, and scissors went through like soft butter.
$.02
I bought a boxwave and was not happy with the glare free one. I have used them on my Treos and liked them, but the one that came for my wizard sucked. It really blurred the screen and made it look like a prism. Maybe it was defective, but I ended up buying another one from javoedge and I am quite happy with it.
just my $.02
greg
I also got an anti-glare from boxware, it does have issues however I emailed them about it and they are getting a new one that doesn't have the issues and they should have it in about a week. To make it even better they created a gift order for the new one for me.
I've tried a number of the commercial screen protectors in the past and wasn't happy with any of them. Of course, there is the ridiculous cost for a little piece of plastic.
The best solution I have found is to use clear vinyl sheeting that you can find at any fabric store, typically for a couple of dollars US per yard. Just cut to fit your screen, clean your screen, wash your hands and vinyl rectangle with liquid hand soap, shake off as much water as possible (but not all), and attach and smooth out bubbles.
Benefits:
- Minimal screen image degradation as compared to many commercial screen protectors
- No adhesives to gunk up the screen
- Lasts 6 months or so
- Easy to replace
- Costs about a nickle per cover
I also have the pocketpctechs write shield anti-glare.
Comes in a nice kit, can't tell its there when the screen is on.
http://www.pocketpctechs.com/main.asp?unit=Cingular_8125-559&area=home
I bought mine from www.nushield.com, but I haven´t been able to apply the first one to my screen.
I´ve used them on my Handspring Visor Edge and on my Himalaya with very good results, but on the Wizard, I just can´t get it installed. Will keep you posted!
Stefan out
Brando screen protector, Boxwave and Martin Fields are my favorites!
I've heard a lot about this Brando, but it is a bit too expensive for me for a piece of plastic. I think they are selling for GBP7+ in eBay. I wonder, is it so good? I've been looking for those 'card' type screen protector that is ultra easy to apply and bubble free because the protector itself feels like a card. Imagine, since the protector is like a card, it is impossible to get bubble under it. Anyone know where in the net I can get one card type for UK??
BTW, I've bought the 'Sensifilm' protector from eBay. It said many things, but of the two thing, antiglare and antiscractch is 100% bluff. Mine still give me glare and it has been scratched like mad with my stylus. Either the HTC is very bad in designing a stylus, or the screen protector is terribly weak. I think the weak protector is a more likely answer.
30$ for a screen protector. That is so silly. I got a protector for my psp for 6$ and it works great. Geez, pocketpctechs is a rip.
Cant i get some from a local store instead?
I can highly recommend Brando UltraClear too! Easy to attach, not visible when attached carefully, no reduction of brightness - display looks like without one (for those who do not like the reflection of the display: buy the Brando classic).
Regards
Carsten

Does the Invisibleshield cover the whole phone or the screen

Does the Invisibleshield cover the whole phone or is it just a screen protector?
It covers pretty much the entire rear and the screen. There is no cover for the 'frame' of the front.
IMHO It's very tough, quite tricky to put on the back (of an XDA Mini S with textured surface) and would have been better if it covered the exposed front parts (but I guess the various button and LEDs get in the way).
Re: Does the Invisibleshield cover the whole phone or the sc
The Invisible shield comes in two styles. One is for the whole phone the other just for the screen. I have a Cingular 8125 with the whole phone style. The kit comes in precut pieces which you apply to various areas of the phone. So it offers a fair amount of protection but does leave some gaps. The screen cover is the best I have ever used.
dropknowledge said:
Does the Invisibleshield cover the whole phone or is it just a screen protector?
Click to expand...
Click to collapse
I had also seen these on Ebay and was wondering if anyone had used it.
The "infomercial" has sold me on it, but I really wanted to get some opinions from others who bought it and used it before I took the plunge.
So, even if just the screen protector does the job, it would be money well spent??
I had also seen these on Ebay and was wondering if anyone had used it.
The "infomercial" has sold me on it, but I really wanted to get some opinions from others who bought it and used it before I took the plunge.
So, even if just the screen protector does the job, it would be money well spent??
newbie2 said:
I had also seen these on Ebay and was wondering if anyone had used it.
The "infomercial" has sold me on it, but I really wanted to get some opinions from others who bought it and used it before I took the plunge.
So, even if just the screen protector does the job, it would be money well spent??
Click to expand...
Click to collapse
Yes, the screen protector is worth the money. I would suggest buying directly from their website. They do not charge for delivery as they do on ebay
invisible shields are THE BEST screen protectors hands-down. I have been using them for ipods, cameras, and all my phones. It's always the first accessory I buy. I'm using one on my 8125.
Easy to put on, doesnt scratch, STRONG, and wont leave a residue if you choose to remove it- which you never will do and it will never come off, either. Plus they have a lifetime guarantee. Highly recommended for any gadgets.
Best piece of gear hands down. I have the "Full Body" on my 8125 and just a screen protector on another. I bought direct since I live here in Salt Lake City, UT. As for somebody saying it never comes off once it is on us untrue. Just respray it and carefully lift an edge and it will come off. :wink:
RE: Does the Invisibleshield cover the whole phone or the s
I just tried to put mine on today, and it didn't cover the entire screen. It's like alot of screen protectors that I've used in that it leaves a 1-2 millimeter gap around the edge. I decided not to use it, and opted to use my WriteShield screen protector that I got from PocketPCTechs. I've tried their AG and C* (clear) screen protectors, and the C* screen protector is the clearest screen protector I've ever seen. And it cover the entire screen of the 8125.
Having said that, I went ahead and put the rest of the InvisibleShield protectors on the rest of my 8125 and I like it. I've got and IS on my IPOD also, and it does a pretty good job.
However, removing is does leave some residue. Like the one for the 8125 the IPOD version comes in multiple sections, and I didn't like the placement of a the pieces that go over the circular sections of the IPOD, so I decided to remove them and maybe try to re-apply them. When I pulled them off, they left a gummy, glue like residue. I did manage to clean it up with some GooBGone. I'm not sure if I'll be able to re-apply those pieces or not since they are not "clear" any more. Maybe there's a way to wash them or something to clean them up.
I may have done something wrong (and if I have, someone please tell me what it was cause I realy like the IS for my IPOD), but I couldn't find anything on their website which gave any instuctions for removing.
Does the 1-2 mm gap around the edge really make a huge difference?
RE: Does the Invisibleshield cover the whole phone or the s
It does to me. Invariably I would always slide of the edge with the pen. Plus it's kinda noticible when you look at it. It's more of a personal thing really. If you're OK with it, then I think the protector that comes with the IS would be a really good one. I just like to have to whole screen covered.
You do know you can order the IS a custom size to fit your needs.
Here's my review of the Invisible Shield, which I installed onto my 8125 earlier this week.
The quality of the material is excellent. I have no doubts this will save my entire phone from bumps and bruises. However putting the stuff on left me hating and liking it at intervals during the "ordeal". Unless one has steady hands and lots of patience it would be nearly impossible to put the pieces on without getting your finger prints on the underside of each piece. The adhesive is seriously good.
I did manage to get all the pieces on, after about 90 minutes. I did have to rinse the screen cover several times in order to clean the underside of smudges left by my fingers. I also had to lift a corner once to take out a bubble that just would not come otherwise. Even at that I was not impressed with how the screen looked immediately after applying it. But now, 4 days later I have to say that the claims of the bubbles working themselves out over time are entirely accurate. The shield is now crystal clear and undoubtedly a good protective device.
The material also has the characteristic of making the phone very grippy. I like that about it. What I don't like so much is that there are many pieces, and you can feel the edge of each one when you hold or handle the phone. This is because the material is thick, and that helps to provide the protection, but it takes some getting used to. The grip can be felt when using the stylus as well, but fortunately the digitizer on the screen is very sensitive so a light touch works well, and this minimizes the drag created by the material.
My final impression is that the kit is worth the money. It will protect the phone from all but the most careless handling, or serious accident. It is nearly invisible and makes for a better, albeit edgy, grip. I wouldn't want to apply it again, but then I shouldn't have to given its toughness. Perhaps next time I'll pay someone else to apply it for me. ;o)
Invisible Shield
FYI. I purchased mine (full cover) for my 8125 at a mall kiosk. They guy asked me if I wanted him to install it as it is tricky.
I have little patience for such things (like airplane models), so I had him install it for $5 extra.
It was WELL WORTH IT!!! The install was top-notch and I am very, very happy.
Could someone post the picture (front, back, side) of the MDA or 8125 with invisibleshield in it. I know that it might be difficult to see it clearly since the shield is almost invisible. Could someone put some arrows in the picture on where the shield is applied. I would like to see which area gets covered before buying it. TIA.
I contacted the seller and asked for the picture. But they don't have it.
Also, once you apply the invisibleshield, can you safely carry the MDA naked in a purse together with all kinds of stuff such as keys, pens, notes, etc?
I'd like to see some photos as well
R
rob61280 said:
I'd like to see some photos as well
R
Click to expand...
Click to collapse
Yea me too but looks like nobody has any picture worth looking

anti glare for the screen?

Has anyone bought an anti glare protector for the screen? I know there is a screen protector topic but they were more focus on just protecting the screen and not about anti glare.
acuralegendz said NuShield anti glare protector was only ok. I rather not pay 25 dollars for an average product.
I also saw link to Lexerd - Viewsonic G Tablet TrueVue Anti-Glare but I havnt heard any reviews on it yet.
I just ordered it yesterday from Amazon, as soon as it's in I'll be happy to let you know.
andygee said:
I just ordered it yesterday from Amazon, as soon as it's in I'll be happy to let you know.
Click to expand...
Click to collapse
I am going to assume that you are talking about the Lexerd - Viewsonic G Tablet TrueVue Anti-Glare. Can you test it in sunlight and indoor light? Thanks a lot
Yes I am, and yes I will be happy to. I don't think it will be here until the end of the week though so will be a few days.
i just installed this screen protector and I must say that the price is ridiculous for the quality.
It makes the screen quality completely grainy. Maybe I have to let it sit for a few hours.
Nice to the touch, has a mat feel. doesn't seem like it effects the touch sensitivity.
the edges are horrible. I can see it lifted all the way around the entire screen and i have no bubbles or dust around the edges but that will change soon. I just hope that as more dust gets trapped under the lifted edges, it doesn't make it worse over time but we will see.
I'm use to the screen protectors where you apply them on like window tints (Body Guardz brand). Had them on my ZuneHD, Droid1, Doid2. All perfect..Lexerd, not even close.
My opinion is that this screen protector should have been 10 dollars. sucks I got the double pack. sigh.
Adding pictures below
pics attached.
stigmax said:
i just installed this screen protector and I must say that the price is ridiculous for the quality.
It makes the screen quality completely grainy. Maybe I have to let it sit for a few hours.
Nice to the touch, has a mat feel. doesn't seem like it effects the touch sensitivity.
the edges are horrible. I can see it lifted all the way around the entire screen and i have no bubbles or dust around the edges but that will change soon. I just hope that as more dust gets trapped under the lifted edges, it doesn't make it worse over time but we will see.
I'm use to the screen protectors where you apply them on like window tints (Body Guardz brand). Had them on my ZuneHD, Droid1, Doid2. All perfect..Lexerd, not even close.
My opinion is that this screen protector should have been 10 dollars. sucks I got the double pack. sigh.
Adding pictures below
Click to expand...
Click to collapse
Thanks for the review stigmax. That sounds horrible even at 10 dollars. FYI there was a one pack of those protectors but little late to tell you that now.
Yea, I knew about the single pack but thought I could save a few bux with the double. After a few hours of use, my eyes got use to the grainy screen
Temp protector I guess, at least I dont have to worry about scratches: )
What I haven't seen elsewhere is that on the "Thank you for purchasing..." sheet that came with the G Tab, it states: "1. The device may come equipped with two anti glare screen protectors over the screen; which should be removed". Huh? Why two? Why remove them. It doesn't make sense. I assume because there is glare, that mine didn't come with them.
murdockr said:
What I haven't seen elsewhere is that on the "Thank you for purchasing..." sheet that came with the G Tab, it states: "1. The device may come equipped with two anti glare screen protectors over the screen; which should be removed". Huh? Why two? Why remove them. It doesn't make sense. I assume because there is glare, that mine didn't come with them.
Click to expand...
Click to collapse
Because at some point there were so many returns (at sears and staples) because of claims of a defective screen which later turn to be some air bubbles trapped under the second layer of the screen protector
I really like my nushield dayvue anti-glare protector. Puts my gtab on par with my xoom visibility wise.
Sent from my Xoom using Tapatalk
Anti-Glare
So has anyone found any good Anti-Glare that are not $30? just trying to find a good screen protector and case so I can stand it up and watch movies if need be.
Ever try Photodon?
http://www.photodon.com/p/MXH-5250-01.html seems nice based on their description but wondering if anyone ever tried one.
I ordered this set a couple weeks ago. One is clear and one is anti-glare:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290551331136&ssPageName=STRK:MEWNX:IT#ht_570wt_1140
They fit the screen perfectly. A little too perfectly actually. It's somewhat difficult to get the protector perfectly straight so that one side or the other doesn't run into the edge of the screen where the edge slightly goes up. I rendered the clear protector relatively useless after attempting to line it up perfectly several times.
Neither of the screen protectors have cut outs for the camera or the light sensor. It doesn't seem to really affect the light sensor, but the anti-glare protector makes the camera pretty much unusable. The camera is fine with the clear protector on.
The reason it makes it unusable is because of how grainy it makes the screen look, and that grain is also visible through the camera. It makes everything blurry. That said, it does a good job of reducing glare as well as a pretty darn good job of cutting down on visible finger prints. I've found that the graininess isn't extremely intrusive for most things. Maybe I've just gotten used to it.
One of the main reasons for purchasing my gTablet was to use it as an eReader for the hundreds of .pdfs I'm required to go through. This is where the grain really becomes troublesome. If it wasn't for the fact that somehow I managed to get the protector on perfectly straight on the first try, I would have already removed it. I'm thinking about ordering another set, cutting out a hole for the camera, and going with the clear protector. I'll make due with some glare here and there and some fingerprints.
bsweetness said:
I ordered this set a couple weeks ago. One is clear and one is anti-glare:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290551331136&ssPageName=STRK:MEWNX:IT#ht_570wt_1140
They fit the screen perfectly. A little too perfectly actually. It's somewhat difficult to get the protector perfectly straight so that one side or the other doesn't run into the edge of the screen where the edge slightly goes up. I rendered the clear protector relatively useless after attempting to line it up perfectly several times.
Neither of the screen protectors have cut outs for the camera or the light sensor. It doesn't seem to really affect the light sensor, but the anti-glare protector makes the camera pretty much unusable. The camera is fine with the clear protector on.
The reason it makes it unusable is because of how grainy it makes the screen look, and that grain is also visible through the camera. It makes everything blurry. That said, it does a good job of reducing glare as well as a pretty darn good job of cutting down on visible finger prints. I've found that the graininess isn't extremely intrusive for most things. Maybe I've just gotten used to it.
One of the main reasons for purchasing my gTablet was to use it as an eReader for the hundreds of .pdfs I'm required to go through. This is where the grain really becomes troublesome. If it wasn't for the fact that somehow I managed to get the protector on perfectly straight on the first try, I would have already removed it. I'm thinking about ordering another set, cutting out a hole for the camera, and going with the clear protector. I'll make due with some glare here and there and some fingerprints.
Click to expand...
Click to collapse
I'm curious if you could use a hole puncher to make a hole for the camera? I have not seen this product so I have no idea what it is like or how thick it is but seems like it could be modded with a hole punch if you do the measurements precisely. Anyways, just a thought I had while reading. Thanks for the review.
jetguy35 said:
I'm curious if you could use a hole puncher to make a hole for the camera? I have not seen this product so I have no idea what it is like or how thick it is but seems like it could be modded with a hole punch if you do the measurements precisely. Anyways, just a thought I had while reading. Thanks for the review.
Click to expand...
Click to collapse
You know, right before I put mine on, I thought to myself - "Should I run out and get a hole puncher for the camera before I do this? No, it should be fine."
I should have went to get a hole puncher. It would work perfectly.
Happy with my Protector
mernst2 said:
So has anyone found any good Anti-Glare that are not $30? just trying to find a good screen protector and case so I can stand it up and watch movies if need be.
Click to expand...
Click to collapse
I bought a matte one and a clear one from Aurum, but fit really well, I think you get get both for under $20. The matte reduces glare and the clear one does not distort the screen. Overall was very happy with the product. The Lexard one and those other "wet" applications ones are a pain in the ass, they also prevent your finger from gliding smoothly on the after application. I got them at Amazon here is the link http://www.amazon.com/s/ref=nb_sb_s...rum+viewsonic&x=0&y=0&sprefix=aurum+viewsonic
NuShield antiglare sheet or DayVue?
Synman said:
I really like my nushield dayvue anti-glare protector. Puts my gtab on par with my xoom visibility wise.
Sent from my Xoom using Tapatalk
Click to expand...
Click to collapse
Just called NuShield, as their site does not work well with IE9 when placing orders, and was told they are currently NOT selling an "antiglare" sheet for the gTablet. They only have their "DayVue" product, which does not have anti-glare feature.
However, if you contact them, they very likely would consider making an anti-glare version as they already have a template for the gTablet.
[email protected]
I was just looking at their website and it describes the DayVue as anti-reflective. Straight from the website under Viewsonic GTablet.
NuShield DayVue™ antireflective film is the best choice for displays that are being used outdoors. It has good scratch resistance combined with greatly improved daylight readable optics over our antiglare film.
I don't know if they consider anti-glare and anti-reflective to be different, but it seems like the same to me.
ive got an antiglair, it works well and was only 10$ off amazon but if you like using it for videos it kills them, thinking about removing mine but i have a hard time throwing 10$ away

Review thread for previous TF Screen Protector giveway *UPDATE 11/4 Taking Orders!*

Reserved.
Previous thread was closed due to not being able to to accept any more requests.
Please post reviews here instead, thanks!
Now Taking Orders! PM me for details. Only post in this thread if you can't PM yet.
Saved for video review
I got the cover today, went on the first time without airbubbles, but unfortunately I got a a hair stuck under the cover. I got it on right the second time, and I'm really loving tthe cover. Its great for reducing the finger prints and glare. It is very smooth and doesn't have the orange peel texture of a lot of other screen protectors, I wouldn't mind getting one for my Droid Charge.
I got mine last night. Brought it to work this morning and slapped it on.
All I can say is I hate air bubbles and this went on the first time without issue.
It is smooth, cut down on the glare, fingerprints less noticeable, and it looks fantastic...
I am absolutely impressed by this. I may have to find out how to get a spare.
Nice can't wait to receive mine and write up a review. Hopefully my stylus will be in at the same time so I can let you know how it works with the stylus.
Recieved mine this morning. The install went smoothly, very few air bubbles that were easy to work out. The tip for removing dirt/hair trapped under the cover was great. Cover does really reduce glare and fingerprints nicely. I like the texture of the cover, it is not as smooth as the TF glass, just right to let fingers glide without grabbing.
All in all I would buy this cover.
Thanks
Just received mine today, install was easy and air bubble was easier to get out compare to what i have used before. Pretty good cover i'd say.
Just got mine as well today, install went reasonably smooth. There are a couple imperfections, but those were my fault and not the products fault. It definitely reduces the glare, and I don't notice fingerprints at all. The camera hole lines up perfect and doesn't affect it at all. Definitely one of the better screen protectors out there. The tip for getting rid of dust worked great.
I will try and get a better picture later; camera didn't want to auto focus properly.
Thanks all for the reviews. I will be posting a BUY thread in the Marketplace section once I get a few more reviews. These will be retail units with complete packaging. So keep those reviews coming!
PS Anyone recommend a cheaper/faster shipping alternative? I'm shipping them via USPS First Class ~$1 to $2 depending on location.
PPS Looking forward to the video reviews
Just got mine. Went on as easy as any screen protector I have tried. No problem with bubbles, reduces prints and glare, also the fit is spot on, only negative comments would have to be that it's not as smooth as glass. I would recommend this product.
Got mine today. Slapped it on, luckily no hair\dust. Minor bubbles which im slowly seeing go away. Glare is minimal as well as the fingerprints. By far much better than the one i received with my case from amazon. Putting an affordable price on it should make you and lots of users happy. Id buy another if need be. Thanks
Thanks to cheinb once again for the free sceen protector your generousity is greatly appreciated.
Received my Screen protector this morning in the mail and was dissapointed to see that customs or the mailman (not sure who was to blame) had decided to fold the package in half.
Despite the crease i still managed to get it to flatten out enough to be useable so I proceeded to line up the edges and found it to be a perfect fit, nice!
The finish on the screen protector adds a matte effect to the display helping to reduce glare in a sunny/brightly lighted environment, welcomed as another added bonus no doubt. The smooth surfaced finish also seems to attract significantly less fingerprints and makes the scrolling and swiping flow better.
In summary i am more than pleased with the build quality and perfect fit of cheinb's asus transformer custom screen protector, now to see how it will stand the test of time and close encounters with my monsters i mean children.
thanks again cheinb good looking out!
I received mine at the beginning of the week, and had absolutely zero problems installing it. I've installed many screen protectors in the past, and this had to be the easiest one I've ever done. The instructions were simple, and I had barely any bubbles that were slowly dissipating.
The feel of the screen protector is great, just the right amount of slide and it really cuts down on the glare.
All in all, one of the better screen protectors I've used, in all categories (Installation, protection, glare reduction, surface feel).
The TF is uses corning gorilla glass, really no need for screen protectors, unless you plan on throwing your devices around. Check youtube for gorilla glass reviews.
Sent from my Transformer TF101 using xda premium
still waiting on mine
fliparsenal said:
still waiting on mine
Click to expand...
Click to collapse
hey Fliparsenal,
You were one of the first batch. Let me know if you still haven't received it in a few days.
chienb
Good!
I got mine yesterday and also applied it yesterda.
The protector is quite thick and sturdy. There was a small paper with sintructions as well.By design it allows for less air bubbles and I have only a few minor ones on the sides because of my in experience.
It has reduced the glare and made the screen less slippery. Fairly thick and I am sure it will last for a long time. The adhesive is also pretty strong. Would have been even greater with a slight blackish tint.
In short I recommend it.
fliparsenal said:
still waiting on mine
Click to expand...
Click to collapse
Same here nothing yet.
Excellent
Received mine the other day, and have had a few days to use the protector.
The following is my opinion. Screen protectors aren't for everyone, but personally I'd rather make a $20 'oops' than have to live with scratches. I don't see the harm in a protector, and in my experience they reduce fingerprints and glare like mad... so, do what you want.
Anyway, here's what I think of this protector:
Installation:
Handy set of instructions. Protector went on without any problems. I used a credit card as suggested to get rid of the air bubbles, which worked out very very well. This installation method is much much easier (and safer?) than Zagg, and similar to other adhesive-type protectors.
Fit:
The protector is cut slightly smaller than the size of the glass. My alignment was spot on, so I don't have any air bubbles around the edges, but there is probably a 1mm (or less) gap around the outside of the protector, which in my opinion is the perfect fit. The cutout for the front camera also is perfect.
Feel:
The protector offers minor friction for fingers. Initially my hands were very clean from the application process, and therefore were not leaving any finger prints. I have since used the TF for a few days, and even let a baby with greasy hands play with it, and the fingerprints/smudges were a minimum. In summary: the protector feels VERY GOOD and appears to cut down fingerprints like crazy. For me, this protector is better than just the glass, and much much better than the protector I had before (I had some 3 for $10 ebay style protector.. it was garbage). This protector is on par with Zagg protectors and their lack of fingerprints (for those who have used them).
Look:
Its hard to tell that there's even a protector on except for a few pieces of dust. Glare is reduced, colors don't seem to be affected. The protector I had before this one was much worse for letting the true colors through. Everything was faded and coarsened (dunno how to best describe that, but it looked bad). All in all, this one looks as good as no protector, with added benefit of reduced glare and minimal fingerprints.
Overall:
Most of my protector experience is with Zagg protectors; on a Nook Color, galaxy s and iPhone. I didn't want to have to fight with putting a Zagg on for a screen the size of the TF, so I have been looking for alternatives. If this protector is competitively priced then imo its one of the better ones for the TF. I once tried a skinomi for a G-tablet, and that thing was a complete waste of money.
Pending price, would get another one of these.
Thanks OP for the protector.
Keep us updated on their availability (I'll probably get another one).
Another question: would it be difficult to make one to fit a G-Tablet?
Cheers.
Ok I've finally received mine. Unfortunately the the package must have gotten folded during transit and it now has creases. I'll make do and will post a tutorial next upcoming weekend. Hopefully the crease is not permanent.

Preferred screen protector?

Considering ordering this for xmas.
Just wondering if people went with standard B&N screen protector, or if they used something else?
I heard about this: http://www.epinions.com/content_1950392452 on reddit. I think I'll be giving it a try first. If it's not good, I'll go with another ready made type. The price is low enough that I don't mind experimenting.
I may bypass that.. Use to work at radioshack and hated having to cut out screen protectors.. even with the pre-made gride it was annoying..
For the NC, I got a $2.5 eBay job, since it's pre-cut, anti-glare, anti-smudge. Works fine.
The more important question would be HOW TO best apply a screen protector. It's a PITA, especially for butterfingers. I watched a bunch of Youtube how-tos.
There are some tricks, the main one is to work in a non-dusty, lint-free environment, and to scrupulously clean the screen surface. May be the expensive stuff have better cleaning kits. Dunno.
Personally i have elected to go without a screen protector. After using an iPod touch with a screen protector for years i have found it to be a much nicer user experience using glass screen devices without a plastic covering. And since i wont be putting the nook in my pocket im not too worried about scratches from keys and dirt. I do however use the leather nook cover when im taking it places.
Sent from my BNTV250 using Tapatalk
I have also elected, for now, to go without a screen protector. I have a leather cover for it, and I use a stylus I purchased from Walmart (Targus, was cheaper there than anywhere else) almost all of the time. So far so good.
I don't think the NT is glass, feels like some kind of acrylic.
I bought a couple of cheap Matte screen protectors from Ebay. The brand turned out to be Insten 22191 PBNXNOOKSP02 Made in China. I could not get it on without bubbles, so I don't recommend them. I bought 2 for $2, so I may try again. I saw one applied at the B&N store and it was perfect, so perhaps the ones they sell at the store are better.
I had a gift certificate so I bought the matte one from B&N. I normally use InvisiShield protectors on my other gear, but they have a slight orange peel finish that I didn't think would serve the great NT display too well. The B&N screen works fine, but frankly I think it slightly diminished the impact of the high quality display. While it lowers the noticability of smudges, it also reduces the contrast and the sharpness and vibrancy slightly. I'm debating going with no protector, or finding a crystal clear protector that literally looks like nothing is there. I know that will do nothing for the glare and smudges, but it won't be any worse in that regard than not using one at all.
I took a chance on a kit from amazon for $9 which included 2 antiglare sheets and a stylus. The screen covers went on fast and work great while the stylus is decent.
I would post a link but I don't have enough posts, search "glareshatterer" on Amazon.
I went with "stealth shields" in ebay. They are like 7 bux for 2. It goes on with water and soap with a squeegie.
Mine went on flawlessly, no bubbles or anything. Crystal clear.
I find the water and soap shields the easiest to install. I always screw up the self adhesive ones and i alost always get at least 1 bubble.
Sent from my BNTV250 using Tapatalk

Categories

Resources