Has anyone bought an anti glare protector for the screen? I know there is a screen protector topic but they were more focus on just protecting the screen and not about anti glare.
acuralegendz said NuShield anti glare protector was only ok. I rather not pay 25 dollars for an average product.
I also saw link to Lexerd - Viewsonic G Tablet TrueVue Anti-Glare but I havnt heard any reviews on it yet.
I just ordered it yesterday from Amazon, as soon as it's in I'll be happy to let you know.
andygee said:
I just ordered it yesterday from Amazon, as soon as it's in I'll be happy to let you know.
Click to expand...
Click to collapse
I am going to assume that you are talking about the Lexerd - Viewsonic G Tablet TrueVue Anti-Glare. Can you test it in sunlight and indoor light? Thanks a lot
Yes I am, and yes I will be happy to. I don't think it will be here until the end of the week though so will be a few days.
i just installed this screen protector and I must say that the price is ridiculous for the quality.
It makes the screen quality completely grainy. Maybe I have to let it sit for a few hours.
Nice to the touch, has a mat feel. doesn't seem like it effects the touch sensitivity.
the edges are horrible. I can see it lifted all the way around the entire screen and i have no bubbles or dust around the edges but that will change soon. I just hope that as more dust gets trapped under the lifted edges, it doesn't make it worse over time but we will see.
I'm use to the screen protectors where you apply them on like window tints (Body Guardz brand). Had them on my ZuneHD, Droid1, Doid2. All perfect..Lexerd, not even close.
My opinion is that this screen protector should have been 10 dollars. sucks I got the double pack. sigh.
Adding pictures below
pics attached.
stigmax said:
i just installed this screen protector and I must say that the price is ridiculous for the quality.
It makes the screen quality completely grainy. Maybe I have to let it sit for a few hours.
Nice to the touch, has a mat feel. doesn't seem like it effects the touch sensitivity.
the edges are horrible. I can see it lifted all the way around the entire screen and i have no bubbles or dust around the edges but that will change soon. I just hope that as more dust gets trapped under the lifted edges, it doesn't make it worse over time but we will see.
I'm use to the screen protectors where you apply them on like window tints (Body Guardz brand). Had them on my ZuneHD, Droid1, Doid2. All perfect..Lexerd, not even close.
My opinion is that this screen protector should have been 10 dollars. sucks I got the double pack. sigh.
Adding pictures below
Click to expand...
Click to collapse
Thanks for the review stigmax. That sounds horrible even at 10 dollars. FYI there was a one pack of those protectors but little late to tell you that now.
Yea, I knew about the single pack but thought I could save a few bux with the double. After a few hours of use, my eyes got use to the grainy screen
Temp protector I guess, at least I dont have to worry about scratches: )
What I haven't seen elsewhere is that on the "Thank you for purchasing..." sheet that came with the G Tab, it states: "1. The device may come equipped with two anti glare screen protectors over the screen; which should be removed". Huh? Why two? Why remove them. It doesn't make sense. I assume because there is glare, that mine didn't come with them.
murdockr said:
What I haven't seen elsewhere is that on the "Thank you for purchasing..." sheet that came with the G Tab, it states: "1. The device may come equipped with two anti glare screen protectors over the screen; which should be removed". Huh? Why two? Why remove them. It doesn't make sense. I assume because there is glare, that mine didn't come with them.
Click to expand...
Click to collapse
Because at some point there were so many returns (at sears and staples) because of claims of a defective screen which later turn to be some air bubbles trapped under the second layer of the screen protector
I really like my nushield dayvue anti-glare protector. Puts my gtab on par with my xoom visibility wise.
Sent from my Xoom using Tapatalk
Anti-Glare
So has anyone found any good Anti-Glare that are not $30? just trying to find a good screen protector and case so I can stand it up and watch movies if need be.
Ever try Photodon?
http://www.photodon.com/p/MXH-5250-01.html seems nice based on their description but wondering if anyone ever tried one.
I ordered this set a couple weeks ago. One is clear and one is anti-glare:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290551331136&ssPageName=STRK:MEWNX:IT#ht_570wt_1140
They fit the screen perfectly. A little too perfectly actually. It's somewhat difficult to get the protector perfectly straight so that one side or the other doesn't run into the edge of the screen where the edge slightly goes up. I rendered the clear protector relatively useless after attempting to line it up perfectly several times.
Neither of the screen protectors have cut outs for the camera or the light sensor. It doesn't seem to really affect the light sensor, but the anti-glare protector makes the camera pretty much unusable. The camera is fine with the clear protector on.
The reason it makes it unusable is because of how grainy it makes the screen look, and that grain is also visible through the camera. It makes everything blurry. That said, it does a good job of reducing glare as well as a pretty darn good job of cutting down on visible finger prints. I've found that the graininess isn't extremely intrusive for most things. Maybe I've just gotten used to it.
One of the main reasons for purchasing my gTablet was to use it as an eReader for the hundreds of .pdfs I'm required to go through. This is where the grain really becomes troublesome. If it wasn't for the fact that somehow I managed to get the protector on perfectly straight on the first try, I would have already removed it. I'm thinking about ordering another set, cutting out a hole for the camera, and going with the clear protector. I'll make due with some glare here and there and some fingerprints.
bsweetness said:
I ordered this set a couple weeks ago. One is clear and one is anti-glare:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290551331136&ssPageName=STRK:MEWNX:IT#ht_570wt_1140
They fit the screen perfectly. A little too perfectly actually. It's somewhat difficult to get the protector perfectly straight so that one side or the other doesn't run into the edge of the screen where the edge slightly goes up. I rendered the clear protector relatively useless after attempting to line it up perfectly several times.
Neither of the screen protectors have cut outs for the camera or the light sensor. It doesn't seem to really affect the light sensor, but the anti-glare protector makes the camera pretty much unusable. The camera is fine with the clear protector on.
The reason it makes it unusable is because of how grainy it makes the screen look, and that grain is also visible through the camera. It makes everything blurry. That said, it does a good job of reducing glare as well as a pretty darn good job of cutting down on visible finger prints. I've found that the graininess isn't extremely intrusive for most things. Maybe I've just gotten used to it.
One of the main reasons for purchasing my gTablet was to use it as an eReader for the hundreds of .pdfs I'm required to go through. This is where the grain really becomes troublesome. If it wasn't for the fact that somehow I managed to get the protector on perfectly straight on the first try, I would have already removed it. I'm thinking about ordering another set, cutting out a hole for the camera, and going with the clear protector. I'll make due with some glare here and there and some fingerprints.
Click to expand...
Click to collapse
I'm curious if you could use a hole puncher to make a hole for the camera? I have not seen this product so I have no idea what it is like or how thick it is but seems like it could be modded with a hole punch if you do the measurements precisely. Anyways, just a thought I had while reading. Thanks for the review.
jetguy35 said:
I'm curious if you could use a hole puncher to make a hole for the camera? I have not seen this product so I have no idea what it is like or how thick it is but seems like it could be modded with a hole punch if you do the measurements precisely. Anyways, just a thought I had while reading. Thanks for the review.
Click to expand...
Click to collapse
You know, right before I put mine on, I thought to myself - "Should I run out and get a hole puncher for the camera before I do this? No, it should be fine."
I should have went to get a hole puncher. It would work perfectly.
Happy with my Protector
mernst2 said:
So has anyone found any good Anti-Glare that are not $30? just trying to find a good screen protector and case so I can stand it up and watch movies if need be.
Click to expand...
Click to collapse
I bought a matte one and a clear one from Aurum, but fit really well, I think you get get both for under $20. The matte reduces glare and the clear one does not distort the screen. Overall was very happy with the product. The Lexard one and those other "wet" applications ones are a pain in the ass, they also prevent your finger from gliding smoothly on the after application. I got them at Amazon here is the link http://www.amazon.com/s/ref=nb_sb_s...rum+viewsonic&x=0&y=0&sprefix=aurum+viewsonic
NuShield antiglare sheet or DayVue?
Synman said:
I really like my nushield dayvue anti-glare protector. Puts my gtab on par with my xoom visibility wise.
Sent from my Xoom using Tapatalk
Click to expand...
Click to collapse
Just called NuShield, as their site does not work well with IE9 when placing orders, and was told they are currently NOT selling an "antiglare" sheet for the gTablet. They only have their "DayVue" product, which does not have anti-glare feature.
However, if you contact them, they very likely would consider making an anti-glare version as they already have a template for the gTablet.
[email protected]
I was just looking at their website and it describes the DayVue as anti-reflective. Straight from the website under Viewsonic GTablet.
NuShield DayVue™ antireflective film is the best choice for displays that are being used outdoors. It has good scratch resistance combined with greatly improved daylight readable optics over our antiglare film.
I don't know if they consider anti-glare and anti-reflective to be different, but it seems like the same to me.
ive got an antiglair, it works well and was only 10$ off amazon but if you like using it for videos it kills them, thinking about removing mine but i have a hard time throwing 10$ away
Related
Since I haven't seen many people here mentioning it, I thought it'd be useful to talk about my experience with Brando anti glare protector for Touch HD.
Few months ago, when I stockpiled on the protectors, I ordered one, just for the testing purposes. They were cheap, so I figured why not.
Now that my previously used ultra-clear protector got badly scratched and even deformed after a situation in which my Touch HD fell face down directly onto a neck of a beer bottle (don't ask) I realized I had to change it. The screen magically survived without any trace of contact, and I was very lucky for having the protector on - without it, I'm sure the screen would've had to be replaced.
Applying the protector
So, I pulled out the anti glare protector and applied it. First of all, the application procedure was slightly easier then with ultra-clear. The anti glare protector seems to be a bit stiffer and requires only one side of the protector to be peeled off before application, whereas the ultra needs 2 protective layers removed. It could also be simply the fact that I got some practice with these things now... But it felt easier in any case.
Fit
As with other Brando protectors, this one is also a bit too short on the bottom. If you start directly at the top of the device screen, leaving absolutely no space between the protector and the screen edge, at the bottom side you'll end up about 1.2 mm too short. For me it's not a big problem, and I certainly don't notice this, since the bottom part is usually covered by hand or fingers, but people who insist on perfection may find this annoying. The cut out for the speaker seems to sit well in it's place, and also be aware that there is a U-shaped cut out for the front camera. The ultra clear covers the camera, but obviously because of the grain-effect I'll get to in a moment, this was not possible here.
Brightness
After applying it I was very happy with the overall look. The screen brightness was the same - I did not notice any reduction in this regard, so I can say that this is very good in terms of transparency.
Sharpness and visibility
As for the sharpness / visibility, I'm hesitant to even say it, but there is a small difference when compared to ultra clear, or no protector of course. But it's a small difference. The effect is sort of like a very, very fine grain pattern across the screen, but I can't stress this enough - it's really no big deal. I'm a photographer and I work with graphic editing software, so my eyes are trained to notice every damn detail. For most people, I would assume that they would hardly notice any difference. So, to cut the long story short - the sharpness stays the same, but you get a gentle grain effect which is usually noticeable only on white background.
To sort of get a feeling of what you can expect, I can recommend you open up a bitmap in Photoshop and add 1 percent uniform noise filter. This is about the same amount of grain you'll see on the screen when using this protector.
Resistance to smudging
One very cool thing I noticed is that anti glare protector also seems to be MUCH, MUCH better when it comes to smudges. With ultra clear, I would usually feel a need to wipe the phone after each conversation or a typed SMS. Basically, any contact with skin would cause a mess on the screen. With anti glare, this is still present, but to much lesser extent. I feel that this is a big advantage when compared to ultra clear protector.
Touch sensation and sensitivity
Well, first of all, it does feel slightly different under your finger. Right after applying it, the finger movement across the screen felt rather stiff. There was definitively more friction going on then with ultra clear, but after one or two days of usage, this effect seems to wear off, or you simply get used to it and don't notice it anymore. I can say I have come to actually like this. Oh, and there is no degradation of screen sensitivity that I noticed. I did not feel that I had to push the screen any harder then before, so this is another strong point.
Anti-glare feature
And finally, what would be an anti glare protector review, without comment on the anti glaring From my non scientific tests, the feature works very well. The glaring is indeed much reduced. I would say about 50-60% less, if not even more. Also, when you do get some glare, for example from the direct light above your head, it's much less obtrusive then with ultra-clear or without protector. The effect is subtle, and will not interrupt you from reading things on the device.
Conclusion
All in all, if you can accept the slight grain effect, this is a great thing for people who use Touch HD in bright light or simply feel annoyed with the fact that the default screen protector is so polished you can sometimes see more of your face on it than the screen itself.
So, by sacrificing 5% of visual quality, you can get about 50% more on the usability. I don't regret buy it at all - in fact I only regret not ordering more on my last purchase.
p.s. I have absolutely no connection with Brando, nor I will get anything out of writing this review. I also have to say I have been ordering stuff from them for a while now, and have been very satisfied with their services so far.
That's a very in depth review which I am sure many will find useful.
I have a Brando Ultra Clear and have recently been using my HD in the garden as the weather in the UK has been so hot and sunny recently. I thought it would never work outside because of the bright light but with screen brightness setting on full I could not believe how good it was. No strain on the eye at all with the sun behind or in front. Not sure if this is because of the HTC screen or the Brando Ultra Clear protector - I've not tried it without.
Sounds like Anti Glare is even better from your review but I would say that Ultra Clear is still very useable in bright light.
Hi, been looking for a proper screen protector but haven't really gotten to it yet..
After reading this I'm convinced, I'm gonna get myself one!
...just can seem to locate one in the Netherlands...all shops sell the ultra clear (with anti glare in the descriptive text), but not just an anti glare one.
Anyone?
Thanks
*ordered through shop.brando etc..*
are you going to post some images?
Psygnosis84 said:
are you going to post some images?
Click to expand...
Click to collapse
Not gonna make any promises, but being a photographer, I guess I should
great review...I hate glare! So, I'm ordering one of these Brando anti-glare screen protectors.
Has anyone compared this Brando anti-glare to the Boxwave anti-glare?
As you say above "The effect is sort of like a very, very fine grain pattern across the screen".
The Boxwave has this and it is almost unacceptable (to me) and was wondering if this Brando was any better (clearer) in this department.
Thanks.
zozz said:
Has anyone compared this Brando anti-glare to the Boxwave anti-glare?
As you say above "The effect is sort of like a very, very fine grain pattern across the screen".
The Boxwave has this and it is almost unacceptable (to me) and was wondering if this Brando was any better (clearer) in this department.
Thanks.
Click to expand...
Click to collapse
Hi, I haven't used any Boxwave protectors, so I can't really say, but I am interested to hear from users that tried them.
Personally, I really got used to Brando anti-glare, and I find the device much more comfortable to use in everyday situations. And I really like the fact that the smudging is MUCH less of a problem.
Anyone know where these can be got in the UK?
**EDIT** Nevermind, I got it here - http://shop.brando.com
$3 shipping worldwide, $12 in total = just under £8...
AndyCr15 said:
Anyone know where these can be got in the UK?
**EDIT** Nevermind, I got it here - http://shop.brando.com
$3 shipping worldwide, $12 in total = just under £8...
Click to expand...
Click to collapse
http://www.inkino.co.uk/zen/index.php?main_page=index&cPath=69&zenid=ebdc7d2530edpgsgpjp2v0qbb1 in Tottenham Court Road fit them for you in case you've got a shaky hand
Not sure if they will have anti glare though.
zozz said:
Has anyone compared this Brando anti-glare to the Boxwave anti-glare?
As you say above "The effect is sort of like a very, very fine grain pattern across the screen".
The Boxwave has this and it is almost unacceptable (to me) and was wondering if this Brando was any better (clearer) in this department.
Thanks.
Click to expand...
Click to collapse
Hmm, I actually prefer Boxwave's grain pattern because it gives "texture" to the screen. Yeah it does lower the screen's image quality but overall it's quite nice I reckon
I got mine today, I really like it. It has a matt finish rather than a gloss finish which I prefer the feel of.
Unfortunately it took about 8 attempts to get it on without the edges slightly overlapping and causing the long bubble along the edge and now I think I have some dust under it
Still, it's a great fit, feels great but I have yet to see how well it's anti-glare properties hold up.
Brando, not so good
I have to disagree. At first I was very excited it about it but then... I find it horrible! I was not able to use it. Could not get rid of the bubbles. I think its cut too big! Wash it and nothing but dust gets caught on the backing that sticks to the screen which has some kind of glue like surface. After washing it gets marks all over and dust. I wasted my money. Expensive, not worth it, needs work. I have installed many screen protectors on my touch hd.
Nope, nope, nope... had none of those problems here...
I've had good luck with Brando compared to other protectors.
c6638746 said:
I have to disagree. At first I was very excited it about it but then... I find it horrible! I was not able to use it. Could not get rid of the bubbles. I think its cut too big! Wash it and nothing but dust gets caught on the backing that sticks to the screen which has some kind of glue like surface. After washing it gets marks all over and dust. I wasted my money. Expensive, not worth it, needs work. I have installed many screen protectors on my touch hd.
Click to expand...
Click to collapse
All you need is a steamy bathroom.
Hey everyone,
looking for a great screen protector that helps with the glare issue and viewing angles. I'm not expecting wonders but anything to help. Hate the fact I see reflection on screen sometimes. Any info would be great. Thanks
Gemni69 said:
Hey everyone,
looking for a great screen protector that helps with the glare issue and viewing angles. I'm not expecting wonders but anything to help. Hate the fact I see reflection on screen sometimes. Any info would be great. Thanks
Click to expand...
Click to collapse
How about checking the Skinomi thread in this very first page of this section ?
I just orderded some screen protectors from ebay hong kong. 11.99 for 3. ill let you know how they work.
Good Screen Protector
Ordered one from Amazon made by Aurum(do a search). It came quickly and I am very happy with it, wished I waited a few days, they have a deal going on with it.
It says its made from Japanese PET, in my experience it is better than those "military" strength ones like Zagg etc(bad evo 4g experience). This one has a dry application and protected on both top and bottom by covers (a protector for the protector). Ships from the US.
I have the Skinomi. I'm happy with it, but it does not appear to help with glare or screen angles (though, honestly, I only used it for a few minutes before installing the protector).
dj_justice said:
I just orderded some screen protectors from ebay hong kong. 11.99 for 3. ill let you know how they work.
Click to expand...
Click to collapse
which ones did you get?
-J
Go with the Skinomi one. It's cheap (relatively if you consider lifetime free replacement) and if you don't botch the installation it looks fantastic. And... you don't have to wait three weeks for something to come from China.
Don't get me wrong, I buy stuff from China sometimes but only when I can't get it here or if it's a lot more money to get it from here.
Anyone have recommendations for screen protectors? Looking for helping with anti glare and no finger prints on it. Any info would be great. Thank for all the feedback so far.
Traderny said:
Ordered one from Amazon made by Aurum(do a search). It came quickly and I am very happy with it, wished I waited a few days, they have a deal going on with it.
It says its made from Japanese PET, in my experience it is better than those "military" strength ones like Zagg etc(bad evo 4g experience). This one has a dry application and protected on both top and bottom by covers (a protector for the protector). Ships from the US.
Click to expand...
Click to collapse
I just ordered one of the Aurums too. I have a "matte" type screen protector on my iphone and I really like it so I hope the aurum one is similar. I will update once it arrives.
emersonlp said:
I just ordered one of the Aurums too. I have a "matte" type screen protector on my iphone and I really like it so I hope the aurum one is similar. I will update once it arrives.
Click to expand...
Click to collapse
Do you mean this one ? according to the user image its not custom made (no holes for the camer/sensors) not sure if it would even cover the bezel + the screen.
sjmoreno said:
Go with the Skinomi one. It's cheap (relatively if you consider lifetime free replacement) and if you don't botch the installation it looks fantastic. And... you don't have to wait three weeks for something to come from China.
Don't get me wrong, I buy stuff from China sometimes but only when I can't get it here or if it's a lot more money to get it from here.
Click to expand...
Click to collapse
The Skinomi one requires a WET application, that then has to dry, do you really want to spray some liquid on your new g-tab? I tried this on my Evo installation was a pain but then my fingers got stuck scrolling, so I learned my lesson and stick to the PET material which has a silicone coating for smooth movement
Aurum Screen Protector
You are right, I have the Aurum one from Amazon on my G-tablet, and there are no holes, but I do not see a difference in camera performance. The protector covers bezel to bezel. I've used the camera with and without the protector, all I know is that it is as grainy before as it was after the Aurum screen protector. I do not use the camera(I really do not need anyone getting scared looking at me) so it's fine by me, it the smoothness of movement that matters.
just my $0.02, but why not use the one by Zagg....?..
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
Traderny said:
You are right, I have the Aurum one from Amazon on my G-tablet, and there are no holes, but I do not see a difference in camera performance. The protector covers bezel to bezel. I've used the camera with and without the protector, all I know is that it is as grainy before as it was after the Aurum screen protector. I do not use the camera(I really do not need anyone getting scared looking at me) so it's fine by me, it the smoothness of movement that matters.
Click to expand...
Click to collapse
Thanks for the info, Traderny. Would you say that the Aurum screen protector allows for smoother gliding movements than the unprotected GTab screen? I'm hoping to find something that provides a nice swipe feel. Too often my fingers would "stick" to the naked screen or (less so, but still) the Skinomi protector.
My .2 cents
Traderny said:
The Skinomi one requires a WET application, that then has to dry, do you really want to spray some liquid on your new g-tab? I tried this on my Evo installation was a pain but then my fingers got stuck scrolling, so I learned my lesson and stick to the PET material which has a silicone coating for smooth movement
Click to expand...
Click to collapse
Wet application screen protectors have been around for a while and it has been shown to not be an issue if you follow the directions on installation. There are thousands of people that have used wet installation screen protectors here in the gTab forums that have reported no residual issues with the gTab during/after application.
Also, you don't spray liquid on the gTab, rather you're supposed to spray the liquid on both sides of the screen protector before application and dab up the excess liquid as you work it to the edges with the provided plastic card.
I've used both PET and this style of screen protectors on devices before and I prefer this over the PET as I have found the PET style protectors to be too shiny for my tastes.
Among the most helpful reviews for the PET protector on Amazon there are these comments:
1.) Good product, but a pain to put on. Just the slightest piece of dust will cause an air bubble.
2.) According to the packaging, this item is "Finger print free" and "Bubble free application". I experienced both. I would NEVER purchase this product again or recommend it.
Just goes to show you that people will find something to complain about no matter what the product is.
Protectors Protect
My experience with screen protectors on cell phones is that they are only good to protect the screen from damage. All of them will show fingerprints, smudges, grease and oil. This is esp. true with a touch screen. it's like wearing glasses you got to clean them alot. So save time money and headache by putting a microfiber cloth in the bag with your Gtab.
I went with the Exim anti-glare screen protectors, but did have to wait for shipping from China. I bought a complete skinomi skin set, and promptly botched the wet application of the screen protector, but since I wanted the anti-glare it just meant a week wait for the Chinese Air Mail which I had already ordered.
Overall I like the Exim, it was easy to install without any bubbles, though you might want to trim the corners a bit as its a very tight fit. I ended up cutting them off after applying it because I had the screen on perfectly without a single dust mote making a raised area. I don't mind a poorly cut corner, but do wish I had just done a quick trimming beforehand as I wasn't perfectly centered.
2 for $12.99... Was worth the wait.
Hey Naieve,
does it really help with the anti glare issue? Also does it have any issues with the touch screen interface? Is the screen protector to thick that it doesnt detect your finger movement on the screen? Any help on the finger print issues haha?
It helps some with the glare, definitely diffuses the light, but it looks more like a compromise in between a clear protector and some of the very heavy anti-glare screen protectors I've seen. I like it because of this actually. As to issues with the touch screen, I spent some time googling before buying, and while I forget where I read it the fact is there is no difference while using this protector. Even a light touch still works just fine. I wonder if that is the reason this AG protector diffuses less light, as I have heard of some AG protectors being too thick and screwing up touch. It does still show fingeprints, but its not that bad and is easy to clean. Definitely less noticeable than just the screen itself.
aasoror said:
Do you mean this one ? according to the user image its not custom made (no holes for the camer/sensors) not sure if it would even cover the bezel + the screen.
Click to expand...
Click to collapse
I said I would update once my Aurum arrived. Like others have mentioned, there is no cutout for the camera or sensor - I don't know what effect that has nor do I really care. I never use the camera anyway.
The protector itself fits perfectly on the screen - it is so perfect that I had trouble aligning it properly and i would get halfway done installing it and notice it was running off the side of the screen slightly.
It took a few minutes to install because I did want it to be perfect. Now that it is installed I am really happy with it. My fingers slide better across the screen and there are far less fingerprints. I am happy with my purchase.
Reserved.
Previous thread was closed due to not being able to to accept any more requests.
Please post reviews here instead, thanks!
Now Taking Orders! PM me for details. Only post in this thread if you can't PM yet.
Saved for video review
I got the cover today, went on the first time without airbubbles, but unfortunately I got a a hair stuck under the cover. I got it on right the second time, and I'm really loving tthe cover. Its great for reducing the finger prints and glare. It is very smooth and doesn't have the orange peel texture of a lot of other screen protectors, I wouldn't mind getting one for my Droid Charge.
I got mine last night. Brought it to work this morning and slapped it on.
All I can say is I hate air bubbles and this went on the first time without issue.
It is smooth, cut down on the glare, fingerprints less noticeable, and it looks fantastic...
I am absolutely impressed by this. I may have to find out how to get a spare.
Nice can't wait to receive mine and write up a review. Hopefully my stylus will be in at the same time so I can let you know how it works with the stylus.
Recieved mine this morning. The install went smoothly, very few air bubbles that were easy to work out. The tip for removing dirt/hair trapped under the cover was great. Cover does really reduce glare and fingerprints nicely. I like the texture of the cover, it is not as smooth as the TF glass, just right to let fingers glide without grabbing.
All in all I would buy this cover.
Thanks
Just received mine today, install was easy and air bubble was easier to get out compare to what i have used before. Pretty good cover i'd say.
Just got mine as well today, install went reasonably smooth. There are a couple imperfections, but those were my fault and not the products fault. It definitely reduces the glare, and I don't notice fingerprints at all. The camera hole lines up perfect and doesn't affect it at all. Definitely one of the better screen protectors out there. The tip for getting rid of dust worked great.
I will try and get a better picture later; camera didn't want to auto focus properly.
Thanks all for the reviews. I will be posting a BUY thread in the Marketplace section once I get a few more reviews. These will be retail units with complete packaging. So keep those reviews coming!
PS Anyone recommend a cheaper/faster shipping alternative? I'm shipping them via USPS First Class ~$1 to $2 depending on location.
PPS Looking forward to the video reviews
Just got mine. Went on as easy as any screen protector I have tried. No problem with bubbles, reduces prints and glare, also the fit is spot on, only negative comments would have to be that it's not as smooth as glass. I would recommend this product.
Got mine today. Slapped it on, luckily no hair\dust. Minor bubbles which im slowly seeing go away. Glare is minimal as well as the fingerprints. By far much better than the one i received with my case from amazon. Putting an affordable price on it should make you and lots of users happy. Id buy another if need be. Thanks
Thanks to cheinb once again for the free sceen protector your generousity is greatly appreciated.
Received my Screen protector this morning in the mail and was dissapointed to see that customs or the mailman (not sure who was to blame) had decided to fold the package in half.
Despite the crease i still managed to get it to flatten out enough to be useable so I proceeded to line up the edges and found it to be a perfect fit, nice!
The finish on the screen protector adds a matte effect to the display helping to reduce glare in a sunny/brightly lighted environment, welcomed as another added bonus no doubt. The smooth surfaced finish also seems to attract significantly less fingerprints and makes the scrolling and swiping flow better.
In summary i am more than pleased with the build quality and perfect fit of cheinb's asus transformer custom screen protector, now to see how it will stand the test of time and close encounters with my monsters i mean children.
thanks again cheinb good looking out!
I received mine at the beginning of the week, and had absolutely zero problems installing it. I've installed many screen protectors in the past, and this had to be the easiest one I've ever done. The instructions were simple, and I had barely any bubbles that were slowly dissipating.
The feel of the screen protector is great, just the right amount of slide and it really cuts down on the glare.
All in all, one of the better screen protectors I've used, in all categories (Installation, protection, glare reduction, surface feel).
The TF is uses corning gorilla glass, really no need for screen protectors, unless you plan on throwing your devices around. Check youtube for gorilla glass reviews.
Sent from my Transformer TF101 using xda premium
still waiting on mine
fliparsenal said:
still waiting on mine
Click to expand...
Click to collapse
hey Fliparsenal,
You were one of the first batch. Let me know if you still haven't received it in a few days.
chienb
Good!
I got mine yesterday and also applied it yesterda.
The protector is quite thick and sturdy. There was a small paper with sintructions as well.By design it allows for less air bubbles and I have only a few minor ones on the sides because of my in experience.
It has reduced the glare and made the screen less slippery. Fairly thick and I am sure it will last for a long time. The adhesive is also pretty strong. Would have been even greater with a slight blackish tint.
In short I recommend it.
fliparsenal said:
still waiting on mine
Click to expand...
Click to collapse
Same here nothing yet.
Excellent
Received mine the other day, and have had a few days to use the protector.
The following is my opinion. Screen protectors aren't for everyone, but personally I'd rather make a $20 'oops' than have to live with scratches. I don't see the harm in a protector, and in my experience they reduce fingerprints and glare like mad... so, do what you want.
Anyway, here's what I think of this protector:
Installation:
Handy set of instructions. Protector went on without any problems. I used a credit card as suggested to get rid of the air bubbles, which worked out very very well. This installation method is much much easier (and safer?) than Zagg, and similar to other adhesive-type protectors.
Fit:
The protector is cut slightly smaller than the size of the glass. My alignment was spot on, so I don't have any air bubbles around the edges, but there is probably a 1mm (or less) gap around the outside of the protector, which in my opinion is the perfect fit. The cutout for the front camera also is perfect.
Feel:
The protector offers minor friction for fingers. Initially my hands were very clean from the application process, and therefore were not leaving any finger prints. I have since used the TF for a few days, and even let a baby with greasy hands play with it, and the fingerprints/smudges were a minimum. In summary: the protector feels VERY GOOD and appears to cut down fingerprints like crazy. For me, this protector is better than just the glass, and much much better than the protector I had before (I had some 3 for $10 ebay style protector.. it was garbage). This protector is on par with Zagg protectors and their lack of fingerprints (for those who have used them).
Look:
Its hard to tell that there's even a protector on except for a few pieces of dust. Glare is reduced, colors don't seem to be affected. The protector I had before this one was much worse for letting the true colors through. Everything was faded and coarsened (dunno how to best describe that, but it looked bad). All in all, this one looks as good as no protector, with added benefit of reduced glare and minimal fingerprints.
Overall:
Most of my protector experience is with Zagg protectors; on a Nook Color, galaxy s and iPhone. I didn't want to have to fight with putting a Zagg on for a screen the size of the TF, so I have been looking for alternatives. If this protector is competitively priced then imo its one of the better ones for the TF. I once tried a skinomi for a G-tablet, and that thing was a complete waste of money.
Pending price, would get another one of these.
Thanks OP for the protector.
Keep us updated on their availability (I'll probably get another one).
Another question: would it be difficult to make one to fit a G-Tablet?
Cheers.
Ok I've finally received mine. Unfortunately the the package must have gotten folded during transit and it now has creases. I'll make do and will post a tutorial next upcoming weekend. Hopefully the crease is not permanent.
I'm trying to decide which will be a better fit for a screen protector. Right now, there really seems to be only two contenders. The Zagg and the Skinomi, links provided. I know there are generic protectors but I'm looking for the "best of class" for this beast. Anyone have any suggestions before I scratch this baby?
Zagg
http://www.zagg.com/invisibleshield/htc-titan-cases-screen-protectors-covers-skins-shields.php
Skinomi
http://www.amazon.com/Skinomi-TechSkin-Screen-Protector-Shield/dp/B005OZHG7Q/ref=sr_1_1?ie=UTF8&qid=1323207100&sr=8-1
-Cyber
I personally hate the wet type of protectors for the screen. It messes up the smoothness of the touchscreen & your fingers don't glide over it easily (especially the tacky feeling Zaggs. Those are the worst).
Go with the dry ones (the kind that use static cling to stick). I ordered the REALOOK protector from Amazon that gets good reviews on their other devices. Should be here in a day or two. They feel as smooth as glass.
I guess it's a matter of preference. I had a Zagg on my Focus for a year now, and it works great for me. It does give the screen a more "grippy" feel though, but I actually like that. If you want it to feel slick, I probably wouldn't go with the wet style. Another plus for the wet though is that it's pretty much invisible when applied. You won't get any peeling or bubbling like a dry protector. A lot of screen protectors are quite noticeable when they're put on a phone.
Reading the Realook reviews on Amazon shows they get mostly great reviews. I might have to give them a try one day. For now, I'll stick with Zagg though. It just arrived yesterday, and my phone should be in by Thursday, so it'll be the first thing I install.
AT&T
I got the one from AT&T from there website and LOVE LOVE the feel it gives.
Just enough Drag to feel comfortable.
wrapsol makes some good ones as well. haven't decided what to get yet...
Got from tmart (can't post a link yet)
search ror item BD005788
Not bad at all
Brando Ultra Clear is the best.
got the htc one from clove technology.excellent fit
My Realook screen protectors came in today. I held off on installing the Zagg to try these. I can say, this is probably the most crystal clear protector I've ever put on a phone. It is 100% invisible.
So what's the con. The fit is so exact, they must have measured in microns. It still bubbles up at the extreme top right corner because it's hitting the small ridge that loops the front face. I definitely ding it for that. I guess if you have robo eyes and can place this thing on exactly, and I do mean EXACTLY, it would be the best protector I've seen. I can't see any blank space what so every, but it's still not on 100%.
The screen is slightly less slippery which I like too. It gives it a better feel. For the price, I think it's worth it. Besides, even if it peels off, you still have a second one to apply.
Tempest790 said:
My Realook screen protectors came in today. I held off on installing the Zagg to try these. I can say, this is probably the most crystal clear protector I've ever put on a phone. It is 100% invisible.
So what's the con. The fit is so exact, they must have measured in microns. It still bubbles up at the extreme top right corner because it's hitting the small ridge that loops the front face. I definitely ding it for that. I guess if you have robo eyes and can place this thing on exactly, and I do mean EXACTLY, it would be the best protector I've seen. I can't see any blank space what so every, but it's still not on 100%.
The screen is slightly less slippery which I like too. It gives it a better feel. For the price, I think it's worth it. Besides, even if it peels off, you still have a second one to apply.
Click to expand...
Click to collapse
Yep, got mine in too. And I agree. Its almost TOO perfect, meaning they cut this thing so there's hardly ZERO room for error when applying. I actually ended up scrapping the first one I applied (it comes w two) because I wasn't satisfied with the slight bubble in the corner.
But I FINALLY managed to install the second one perfectly. Now its amazing & 100% perfect. Thank God, cause it freakin took forever. You really have to have patience when applying these. Be sure to stick a small piece of scotch tape on the bottom side so you can peel it up easily, because you're going to be doing that a lot to get it to seat just right.
I installed the maximum body Zagg and the screen protector turned out perfect. I've installed zaggs on LG Quantum, and Samsung Focus so I had some practice. For some reason the Titan zagg seems better quality than the ones installed on the other phones. I'm really not seeing any orange peel. I also put on the case mate tough case and doesn't mess up the zagg protection at all. For the Titan I love the Zagg
Sent from my HTC Titan using Board Express
I never liked the grabbiness of the Zagg protectors. I ordered the ATT offered two-pack not knowing they were the full on glare reducing version. At first, it was a little too much, but the glare reduction seems to settle in a bit with use. OR my eyes are used to it now, but I quite like it after using it for a while. I matches the matte finish of the phone.
That said, I do want a screen protector that doesn't have anti-glare made by the same people as the ATT Samsung Focus version. Super slick, was pretty tough. Anyone know the vendor that made it for ATT?
"Orange peel" - that's a good description of my Focus Zagg screen protector. It didn't bother me though. I still have my Zagg in my drawer if the Realook craps out, but I don't think so.
I just bought the Skinomi Carbon Fiber full body kit that comes with a screen protector and really like it.
One BIG problem though: The Carbon Fiber back skin seems to have killed my signal strength. I now get no service instead of 3 bars? It covers the whole back of the phone. Even the plastic antennae area.
I'm surprised that it would kill your signal strength. I would check the metal contacts on the back case and the phone to make sure everything is touching and seated properly. Someone else in the forum tried that, and it fixed their problem.
I'm using atFolix anti-glare screen protector, it's brilliant get improved contrast and it's finger print resistant!
Got it from here: http://www.amazon.co.uk/atFoliX-FX-...m=A3P5ROKL5A1OLE&pf_rd_r=05DX3CNJ9KFAVHD8RYFC
using this screen protector now . works well and it comes with a tiny piece for the camera len !
http://www.obostore.com/rock-anti-f...n-protector-for-htc-titan-p-3597.html?t=12317
xtrememanix said:
using this screen protector now . works well and it comes with a tiny piece for the camera len !
http://www.obostore.com/rock-anti-f...n-protector-for-htc-titan-p-3597.html?t=12317
Click to expand...
Click to collapse
This looks good, on close up do you get the frost effect? I ask because that's my only minor gripe with the atFolix anti-glare screen protector!
gfreek said:
This looks good, on close up do you get the frost effect? I ask because that's my only minor gripe with the atFolix anti-glare screen protector!
Click to expand...
Click to collapse
i'm not sure what you mean by the frost effect . to me its really clear !
gfreek said:
This looks good, on close up do you get the frost effect? I ask because that's my only minor gripe with the atFolix anti-glare screen protector!
Click to expand...
Click to collapse
Ok I'll answer my own question! Curiosity got better of me so decided to get Rock Naked Screen Protector AF & AG, and sure enough it's clearer then atFolix anti-glare screen no frost effect!
So if anyone's interested here are the Pros and Cons between the two screen protectors:
atFolix anti-glare got it from here http://www.amazon.co.uk/atFoliX-FX-...0VSQ/ref=sr_1_1?ie=UTF8&qid=1330083294&sr=8-1 :
Pros:
- Easy to fit
- Perfectly fits the screen of the Titan no gaps!
- Excellent anti-glare and anti-fingerprint
Cons:
- You lose sharpness of the display and get frosted glass effect on close inspection!
- Easily scratches!
Rock Naked Screen Protector AF & AG got it from here http://www.obostore.com/rock-anti-f...ed-screen-protector-for-htc-titan-p-3597.html :
Pros:
- Good anti-glare and anti-fingerprint
- You don't lose sharpness of display i.e. no frosted glass effect
Cons:
- Fiddly to put on!
- Not a perfect fit for Titan about 1mm gap around screen!
- Easily Scratches
For me between the two I prefer the Rock Naked Screen Protector over atFolix losing screen sharpness/frosted glass effect was too much of a compromise!
So as many of you may have noticed during your uses with the nook in either bright lighting, in the car, or straight up outside (to cold for that here), the glare on the screen can get quite bad. So i was looking online for a decent antiglare for the NT or NC and i stumbled across this:
http://www.amazon.com/gp/product/B004MC4KF8/ref=fb_lfb_prodpg_0
A cheap, 2 pack with stylus, antiglare screen protectors. Now im not going to claim its the best one on the market, but if your looking for a cheap one, then go with this. It has been working very good on my NT, and it makes the screen feel silky smooth, not to mention severely reduces the nasty grease lines from my fingers.
Also, the stylus was actually surprisingly good. I've used numerous ones (cheap ones, for sure, but still multiple) styluses and this is easily the best one I've found. Nice and solid with a reactive tip that doesn't grip the screen or seem like it will fall off.
I can second this I actually purchased the same thing like a week ago. I love my protector its real nice and the stylus is pretty good. A little too sensitive with the app drawer (it likes to open apps when trying to turn the app pages) but other than that its perfect!
Just received this today and I must concur...a quality screen protector and stylus! I purchased my wife the Caseen case also and we've been really happy with it as well.
I purchased the official B&N anti-glare screen protector for $20 (eek!). I got it mainly because my daughter somehow manages to get food and who-knows-what-else on the screen. B&N says not to use moisture when cleaning the screen, but that's the only way to get the crud off. So, I got the B&N protector.
Anyway, despite comments online about people destroying both sheets in the process of installing them, I installed mine without any problems. First I made sure the screen was completely clean with absolutely no dust on it. Then I peeled back just an inch or so of the removable film, pushed the top edge of the sheet to where the case meets the screen, then slowly peeled back more as I pushed the sheet onto the screen, by bending the sheet as I worked my way down the screen. No air bubbles. No dust. No dirt. It's perfect and it looks like it will last forever.
I've got the glareshatter screen protector, its fantastic. That metal stylus is fantastic too. Do yourself a favor and hit up your local auto parts store and pick up a microfiber cloth, keep it on hand for cleaning. Also a little white vinegar on the microfiber does the job nicely.
Sent from my BNTV250 using xda premium
Hey Guys,, i am thinking of getting the above,,, i read in the forum some of the screen protector is causing harm to the screen....
is this case with this screen protector also???
Can somebody show some light on it.
Cheers!!!!!!!!!!
I bought the Import version of the Caseen Glareshatter for under $10 on ebay. Never owned the Caseen's standard protector, so I can't compare.
This is what I like:
Easy to install - it's about 2mm narrower than the screen
The feel is about perfect
Glare is definitely reduced though you still have to compensate when it's extreme
The fingerprints are there but only vivilbe from an angle with the screen off. They don't affect the visibility with the screen on.
Thing I don't like:
Makes the screen darker which is especially noticeable on the white background. I had to increase the brightness about 10% to compensate for it.
Only had for a couple of days but I am very happy so far.
Any idea where to get those in Europe? I could only find shops in the US carrying them (on ****ingly high shipping rates).
I trusted you guys and got the Glareshatter screen protectors. They really make a huge difference. Installation is really easy, just be sure to clean the screen first.
so is this glareshatter version truly the best then?
Just alittle weary on how it effects the clarity. Since some of those amazon reviews mention it.
Citizen Toxie, I was a little worried about that, too. But honestly, it's really hard to tell there's even a screen protector installed. I haven't tried any other brands, because I've really been satisfied with the import Glareshatters.
So you haven't seen it make the screen darker then? I usually keep my screen at 50%, so I'm hoping it looks the same.
If so, I will probably just grab that one.
I had my system brightness set to 30% before installing the screen protector, and I haven't changed it since.
gotcha. thanks.
guessing you grabbed the import one off ebay then?
http://www.ebay.com/itm/caseen-Nook...?pt=US_Tablet_Accessories&hash=item4cfc1c766b
nevermind. all good now.
I actually got mine off Amazon in a packaged deal with a stylus. They're also available on Caseen's official website I think, so see where you're able to get the best deal after shipping and everything.
Only 11 bux for 2 of the Glareshatters and a stylus on amazon. Pretty sweet deal.. ordering one now!
I asked someone who had used an antiglare screen protector if he recommended it and he said no because it significantly darkened the screen.
I went into B&N because my tablet was dead in the water, would not turn on at all and had to be swapped out. I asked to get an anti-glare screen protector there and he pulled one out and said they are normally $20, but because they came with a cloth inside that apparently damaged the screen or the screen protector confused that they were giving them away... Not sure if this is true or still available if so, but just thought I'd share. Made me happy!
Interesting. Wondering if that's worth a trip.
Decided I'm just going with the B&N one, since I don't really need the anti-glare.
Has anyone came across a good privacy screen protector, or something that cuts down the viewing angle quite a bit?