Orange M3100 Restoring Generic Today View - 8525, TyTN, MDA Vario II, JasJam Software Upgradin

Hi
Could someone tell me how to remove the Orange today screen so I can revert back to the normal today screen as in my Vario etc. Not bothered about network branding just want the original today profile.

jonboy8841 said:
Could someone tell me how to remove the Orange today screen so I can revert back to the normal today screen as in my Vario etc. Not bothered about network branding just want the original today profile.
Click to expand...
Click to collapse
try Start -> Settings -> Today -> Items -> there should be a plugin responsible for that, just uncheck it and voila. should work.

Many thanks
What an idiot. I should have checked this first.
Sorry to post such a dumb ass question !!

jonboy8841 said:
What an idiot. I should have checked this first.
Sorry to post such a dumb ass question !!
Click to expand...
Click to collapse
hehe, someone should put it in FAQ.

Any clue on how to install de original Orange today view ???
After an upgrade from WM5 to WM6 the nice orange today view is gooone and without it i usually don't see that i have missed calls and stuff.

Related

sms

Does anyone know a way to know if an sms has indeed been sent away? some Sms's just don't arrive and there is no notice to confirm the fact that it was sent off.
Lionel,
Pocket PC 2003 solves this. It displays a little message bubble when a message has been successfully sent.
I have seen that in Pocket PC 2002, if I write and send a message and turn off the display before the message leaves my phone, it will never go. But it will give you the error messge when you go back into your SMS's.
Regards
Keith Burke
Dublin, Ireland
many thanks, so I guess I'll have to get pcc 2003!
greetings,
Lionel
And you can cook it up from here
http://cuba.calyx.nl/~jsummers/ROMkitchen/
Go for the 4.00.10
Best of luck
Hi Ranger,
Can I be sure everything will work all right by upgrading to 4.00.10? I read quite some comments about a series of problems and some people going back to previous versions. Isn't it going to bust up my phone settings in Belgium? Someone wrote not to do any upgrades unless your an expert technician.
2. If I do go on with the upgrade can I just use sd-backup and get my stuff back from Sd-card? Isn't that going to restore my old system?
3. I don't know anything about technics. Most of the options on http://cuba.calyx.nl/~jsummers/ROMkitchen/ sound like Chinese to me.
Sorry for all the dumb questions, but I want to make sure I'm not going to run into trouble.
Hi Ranger,
I decided to run the risk anyway. I can probably do a hard reset and backup if I get into deep trouble.
I went to your link, but as I am a complete beginner at this, I got stuck after 'building the rom now'! I asked for the 'Installer.exe' but couldn't find it on my pc. What shoud I do?
greetings,
Lionel
Ok, first off. Back up your XDA ROM to your SD card. I've never done this, but I'm sure once this is done you can copy it to your desk top.
Secondly, yes there is a possability that it will kill your phone. See http://www.xda-developers.com/forum/viewtopic.php?t=1624
But I have never had a problem, once I stick to my golden rule. Close EVERY PROGRAM that you possibly can while doing the upgrade. And son't touch your computer while it is doing it as well. It's a tiny price to pay. If you're using USB it shouldn't take more than 5 minutes. With Serial cable, I heard it can take upto 20 minutes, maybe more.
As far as downloading it, after you've selected the options in the ROM kitchen [whici belongs to Jeff Summers by the way, not me ] make sure that the bar up the top is still green, NOT RED.
Next, down the bottom there are three options. For yourself, choose the EXE file. After a few seconds, might take upto 30 seconds, up the top of the screen will be a button to down load your file. Just save it somewhere on your computer and run it.
Make sure that your phone is in it's cradle which should be conntected to your computer [or connect the phone to the computer with a serial or usb cable]. Also make sure that the power cable is plugged in.
I think some people have advised taking out your SIM card but i never have.
That should be it.
Let me know either way. If it messes up, just pray that it's after 5% or 10%, so I hear. If so we can try the second option.
Regards
Keith Burke
Dublin, Ireland
One last thing. Take a note of your Network provider settings [GPRS etc...] before you upgrade. They will not be in the new 2003 image.
I forgot when I was doing mine and no longer have my GPRS settings
Hi Keith,
I'm trying it out right away. I have the backup on the sd-card, so that should work fine.
Just be careful with your SD card. I have heard a few reports that it sometimes gets erased in the PDA. Can't remember when or where but if you search the forum you might find it.
Good Luck. It's worth it.
if all you need are sms delivery reports, just click on options when in the compose sms screen and then click on delivery reports, unfortunately you have to do this for every sms as there doesnt seem to be a way to switch it on permanently.
ranger said:
And you can cook it up from here
http://cuba.calyx.nl/~jsummers/ROMkitchen/
Go for the 4.00.10
Best of luck
Click to expand...
Click to collapse
Does this have a radio update ?
Regards
René
Hi,
I've been trying to cook about 20 times since the 1. of August. Tried about everything. Tried all the roms, with and without adding software. Turning off my firewall. Trying all the Rom's. No other programs running.
This is what happens every time:
After selecting the items, I choose the 'install.exe' option and choose 'build rom now'. It starts doing 'something'. I have ADSL and after about 10 seconds the blue bar at the bottom is completed. At the top of the window in the yellow background it keeps saying
'Creating rom... Please be patient
copying rom Files
running mkrom
even after waiting for 30 minutes nothing more happens.
What am I doing wrong?
greetings,
Lionel
Radio Upgrade
@rk
No.
There's no Radio Stack Unit (RSU) Upgrade integrated.
As it depends on the location, where you live, be carefull, which you choose.
For me living in (good ol') Europe the RSU 4.21.00 from O2 UK webside is working.
My native language is Greek and naturally I send Greek sms.
The only problem is that XDA sends them using Unicode character set meaning that over 70 character messages will be splitted.
Does anybody know of any solution on this issue?
I have an O2 payg sim card, even though I ask for delivery reports on sms each time I dont get them, reason being the remaining balance comes in as an sms which cancels the process somehow. Has anybody got a solution to this?
regarding the last, on o2, put *0# in the subject line, and the main sms in the body.
neil
ukneil said:
regarding the last, on o2, put *0# in the subject line, and the main sms in the body.
neil
Click to expand...
Click to collapse
Thank you very much, that worked a treat, I was told by somebody to put that *0# before the fone number, no wonder it didnt work, thanks again.

xda freeze if click the phone icon

hi!
i cooked a 4.01.16 ROM and wrote in xda's mem. the device working good for a 3-4 days, then the phone section is going to crazy :evil:
my xda freeze (or very slow) if i click the phone icon on top of the screen, or click the phone settings icon.
when i remove the SIM card from the xda, the pda section of device is working good.
can anybody see this problem? what could i do?
i afraid this will a hardware problem
ps: sorry for bad english
mine too
mine freezing but i don't know why just the today ascreen though
1st step, ensure that you are not using any of TMO plug-ins ... remove them from Today->Items ... and delete the files named VBattery.lnk and stk.lnk from the \Windows\startup directory .. and soft reset.
Next, make sure that it's a common problem with any other SIM .. some SIMs with out-dated electric profile can cause problems with the RSU.
Last, have you upgraded the RSU with the new ROM ??

Feedback for the new O2 UK 1.72 ROM Upgrade.

I have created this topic to try and get all feedback specific to this upgrade into one place.
So if you have comments, issues, problems, opinions or just plain questions about this upgrade, post them here.
great job dcs.
let me be the first to post and it's regarding Incoming MSG.
When i first got my unit from Philippines, it was loaded with 1.66WWE and with this version i was able to select preloaded or customized WAV as incoming SMS tone. But it went missing when i upgraded to Waxx's 1.72 and even now to the latest o2 UK 1.72. Anyone else experiencing this?
lazzy said:
great job dcs.
let me be the first to post and it's regarding Incoming MSG.
When i first got my unit from Philippines, it was loaded with 1.66WWE and with this version i was able to select preloaded or customized WAV as incoming SMS tone. But it went missing when i upgraded to Waxx's 1.72 and even now to the latest o2 UK 1.72. Anyone else experiencing this?
Click to expand...
Click to collapse
I am able to do this. From the Phone app. Use Tool/Options/Phone and tap Other Settings button. then use the Notifications tab.
Latest ROM upgrade??
I have read the o2 blurb, but can other o2 uk user tell me, what do I really get from this upgrade that makes it worth all the hassle of resetting my device and re-installing all of the hardware please?
Many Thanks
Pete
NB post here or as a private message thx
dcs,
finally after flashing it again this time with
ROM 1.72
Radio 1.17
ExtRom 1.17.181 (modified by ZeroXtreme for Asia) http://forum.xda-developers.com/viewtopic.php?t=12547
i am able to select WAV as incoming msg tone. not too sure what happened.
Re: Latest ROM upgrade??
peterbutler19 said:
I have read the o2 blurb, but can other o2 uk user tell me, what do I really get from this upgrade that makes it worth all the hassle of resetting my device and re-installing all of the hardware please?
Many Thanks
Pete
NB post here or as a private message thx
Click to expand...
Click to collapse
Personally, I find the performance to be improved and also stability. Also, when a call comes in, the Answer button on the dialog works, which didn't before. As part of the extended ROM, O2 have provided improved video streaming over GPRS plus video for MMS (I haven't used either yet). The OS itself has the Microsoft user update 2 included. Of course, the 181 release also has Blackberry included.
lazzy said:
dcs,
finally after flashing it again this time with
ROM 1.72
Radio 1.17
ExtRom 1.17.181 (modified by ZeroXtreme for Asia) http://forum.xda-developers.com/viewtopic.php?t=12547
i am able to select WAV as incoming msg tone. not too sure what happened.
Click to expand...
Click to collapse
OK. Strange, but at least you are sorted
Edit: Maybe it is something in O2 Active that causes the problem? I have uninstalled it, so perhaps I am unaffected. Could other people with O2 Active still installed throw light on this?
msn
Hi, I have installed the new rom (1.72.187). Everything is ok but Messenger. I can surf web sites using gprs and wifi but i cant connect msn. I always get the same error. "Logon to MSN Messenger failed because the service temporarily unavailable." But i can connect with my laptop. Any idea? thanks....
dcs,
have you tried Battery Pack Pro v1.1.10 on this? The last time i used this with 1.66WWE, i keep getting total blackout on my XDA2 with Bluetooth light steady blue and i hard to perform hard-reset. since then i was afraid to try again.
Re: msn
dherrero said:
Hi, I have installed the new rom (1.72.187). Everything is ok but Messenger. I can surf web sites using gprs and wifi but i cant connect msn. I always get the same error. "Logon to MSN Messenger failed because the service temporarily unavailable." But i can connect with my laptop. Any idea? thanks....
Click to expand...
Click to collapse
Have you applied the latest patch from Microsoft? Take a look here: http://www.microsoft.com/windowsmobile/downloads/msnmessenger/pocketpc.mspx
It does state that you cannot access the service unless it is applied. Quote: "Customers without the updated software will not have access to the Service until the download has been completed."
lazzy said:
dcs,
have you tried Battery Pack Pro v1.1.10 on this? The last time i used this with 1.66WWE, i keep getting total blackout on my XDA2 with Bluetooth light steady blue and i hard to perform hard-reset. since then i was afraid to try again.
Click to expand...
Click to collapse
No, sorry. I have never used it.
Anyone else used it?
Battary Pack
Dear
dcs,
have you tried Battery Pack Pro v1.1.10 on this? The last time i used this with 1.66WWE, i keep getting total blackout on my XDA2 with Bluetooth light steady blue and i hard to perform hard-reset. since then i was afraid to try again.
Click to expand...
Click to collapse
I also have identical experience using the Battery Pack Pro v1.1.10 on 1.60 WWE. Being scared to have a try on 1.72. Should anyone pioneer on this, please also let me know. Thanks
Blackberry?
I'm trying to understand what the benefits of having Blackberry are. The Blackberry website says you get all the stuff which I'm sure I already have with my XDA. Things like e-mail and IE. Except for my e-mail which is blocked by my ISP, Plus.net (I can only view/download e-mails, not send new ones).
What's the big improvement I'm supposed to get with Blackberry? :?
lazzy said:
dcs,
have you tried Battery Pack Pro v1.1.10 on this? The last time i used this with 1.66WWE, i keep getting total blackout on my XDA2 with Bluetooth light steady blue and i hard to perform hard-reset. since then i was afraid to try again.
Click to expand...
Click to collapse
I am running v1.1.1 with no problems on the v1.72 Rom. Worked fine with 1.60 also but no experience of v1.66.
have already installed New ROM 1.72.187
in this ROM, i think it work faster than 1.60 but liked other 1.72 ROM from T-mobile.
In the Ext ROM ,it doesn't include some software such as GPRS monitor.
Now ,I desired to cook it.
More stable without question. Only thing that I have found is that the O2 logo can't be moved. Dam thing stuck in middle of title bar. BT Tools works ok. Better wapsupport for o2 active, though XDA seems to forget it's connected and will drop connection and reconnect when conecting to O2's wap service.
Still it's a worthwile update.
I am having problems with Fonix voice dial. When I adda voice tag I get an error that it cannot update, hard or soft reset doesnt help. Also if I restore my backup using the built in backup program I find that streaming video and blackberry programs both vanish from my xda 2.
Feed back
looking good so far. I have added all my apps including BPP 1.1.1 and everything works fine.
SRS now works as well whereas before it trashed my xda II
I am from Asia but installed this UK o2 ROM and found its totally working good.
However, one thing is the autoconfig function has gone.
Anyone knows how to get this from the previous AISA rom?
Blackberry Config
Anyone been successful with this yet?
Ive activated the install and the BB client tries to connect somewhere over GPRS, but eventually suspends itself.
Ive got access to our Corporate BES so should be able to get it working. However, there seems to be some mention in the ROM upgrade guide about a desktop client manager (needed on PC to download the policy).
Ive seen posts that say O2 is not making it availble until Jan 05 - anyone confirm?
Oh, and Im actually using Vodafone

Personalizer 2.0 - Change operator Name !

This is one handy tool, it's a simply program that let you change ALL the operator names inside your phone to whatever you whant. Because it also fix some problems with phones that show the 5 digit ID i tought i share with you all. Works almost on any device ! Cheers
Install to Main Memory and NOT to memorycard !
Developer: codyppc
very nice app
works fine
thanks
very awesome cab it is useless but fun thing to do, now i have "pimp mobile"
joe
works on my phone until i make or receive a phone call
Very good Thanks
1loudsvt said:
works on my phone until i make or receive a phone call
Click to expand...
Click to collapse
ok? and what phone, radio, rom, carrier, etc are using....
illcaptive said:
very awesome cab it is useless but fun thing to do, now i have "pimp mobile"
joe
Click to expand...
Click to collapse
i don't think it's useless, i used it to put my name on the today screen without the rest of the owner information, i think it's GREAT. i used to try and do it manually through the reg, but it defaulted every soft reset, so this thing is titts for me.
Yeah it's great little tool. I used it because my operator showed the name from the paycards (Pay&Go) and i have a abo, so changed the name to the operator name.
Great little program
Works a treat on my wizard.
Many thanks
galaxys said:
ok? and what phone, radio, rom, carrier, etc are using....
Click to expand...
Click to collapse
htc apache, helmi wm6 rom, verizon, any time i do something it reverts back :-(
When I uninstall this, my phone gets an error about not being able to run the mortscript. Is the uninstall supposed to delete every instance of the program?
1loudsvt said:
htc apache, helmi wm6 rom, verizon, any time i do something it reverts back :-(
Click to expand...
Click to collapse
you can easily do it in regedit
HKLM\system\state\phone\current operator name
doing that it reverts back as well
I use a dual number sim (VODAFONE Romania) and it's not working for me.
Don't work for me....
After some second the operator name comes back....
I have tried also with the register editor.....
Anyone has a solution?
Yeah same here i did it in regedit and after a few seconds it came back... except in "HTC Home" it has stayed which is where i see it most so kind of ok.
Even S2U2 it cam back after a few seconds!
MM
MaxMotus said:
Yeah same here i did it in regedit and after a few seconds it came back... except in "HTC Home" it has stayed which is where i see it most so kind of ok.
Even S2U2 it cam back after a few seconds!
MM
Click to expand...
Click to collapse
Same thing......
Gr8 work thanxs bro
Great work
It works perfectly fine on my Universal WM5, operator name doesn't change even after soft-reset or while makin' or receivin' calls.
Great work, sport.
Cheers..
works perfectly, thanks =) it only changes to our original operator name when the signal changes..after the signal is stabilize, it will be turn back to our name

[Q] Please help me fix my phone - 2.1 generic -3mobile Australia

Hi guys,
My flatmate's phone is an Xperia X10a on 3 mobile. When they bought it the shop person said to upgrade (it was 1.6 so no kidding!!). I told my flatmate I'd sort it for them (I'm keen to push the android front!), so I downloaded the official update programs (both of them) and found out first hand how useless Sony is, but it said that I already had the newest version; ugggh.
So I came here and installed the generic official 2.1 rom (through the flashing tool here). It's great, everything seemed to work, but the internet doesn't work over 3G. It works fine over the wifi, just not over 3G.
What are my options here? I'd really like to get this sorted!
Thanks guys in advance.
have you downloaded the APN setting for that network?
if you are not sure ...go to settings, click on sony ericsson and click on settings download
Feelers said:
Hi guys,
[...]
Thanks guys in advance.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=876878
Thanks for the quick responses. So after a quick google, that's the access point name, which tells it how to connect specifically to my carriers network?
I had a quick look through the documents, and three mobile.au is in there, so I'm guessing it's fine. My flat mate isn't home right now so I can't attempt it. It seems like it just figures it out itself when you have the list, I'm surprised there isn't some sort of selection process.
Kudos to the both of you. Thanks given.
Done and done! All working, and without any preloaded network crapware installed.
Cheers

Categories

Resources