Anyone know where I can get replacement parts? I have a PDA2K and the two screws on the sides near the top are both gone. This has caused the plastic sides/slider to break. All of the hardware functions but the casing/housing of the base unit is now broken. Ideas are very welcome!
Thanks,
-Robert
Local to you in the US PPCTechs carry used sx66 parts:
http://www.pocketpctechs.com/main~u...rea~repairs-Parts+Only~item~XDA-TCOV03-02.htm
but for a used face, used slide plus screws they want $90 and the don't have the backs
or if you don't mind champagne gold I have brand new orange branded m2000 casings:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140018269984
For £24.99 GBP plus postage ( about $60 all in ) and I'll send some screws for free
Richard
Related
I know they are relativelyinexpensive item, but when I broke one & lost one I went out to buy a replacement. I could get any number of palm stylus 3 for $9 or 3 for $19 but none that fitted my XDA IIs. Then I went online and found the cheapest I could get mine was 3 for $30. Has anyone found any cheaper ones?
Also be aware of the 3 in 1, if the tip comes off for the pen, it can get stuck in the clip that holds it...
Good point about the 3-in-1 stylus. While in Hong Kong, I tried a few different brands until I found one where the cap didn't come off. I had to use needle nose pliers to pull them out. It is better to find this item at a retailer because you do want to test them. It is a great accessory though.
Replacement Stylii
Has anyone had any luck finding replacement styli for the Blue Angel? Mine broke last night, and I can't find the second which -- theoretically -- came in the box. I found my styli for my old XDA, my XDA II and some plastic one for an original Palm Pilot I still have laying around... <sigh>.
Anyway, I see them up on eBay -- and the sales prices aren't too bad. But the shipping and handling are three times the cost of the stylus -- and the price "break" for ordering multiple items only makes shipping for the additional items cost as much as the stylus itself!!!
Anyway, any direction you can point me would be most appreciated.
Thanks!
has anyone found a cheap stylus yet? i would be willing to buy in bulk and sell them at cost to everyone on here.
ok i got hold of a load, i can do 1 xda2s stylus for £4.20 inc P&P or 3 for £10.50 on ebay by winning an auction
find my auctions here - http://search.ebay.co.uk/_W0QQsassZairportinfo
or you can do 3 for £9 if you just wanna pay me via paypal no ebay auction.
email me on [email protected]
Although im selling stuff please don't delete this thread as this is a service. At this price im not making any money on them.
Thanks
Rob
I have also made a contact and im able to get many xda stuff at great prices. pm me or post up what your after
just updating my links so you don't get a dead one.
Find many items on my listings at XDA EXTRA on:
http://search.ebay.co.uk/_W0QQsassZxdaQ5fextra
XDAIIs Stylus
I can get the Stylus' cheaper at my local O2 shop !
By the way - the auctions are violating Ebay policy...... buy at your own peril...
price: £0.99
Simply bid ON ONE ITEM and adjust the final amount to £10.50 for 1st class delivery
get it fast price £14.35 inc p&p UK only
Click to expand...
Click to collapse
i have an xda for sale the screen is ok but used, the only problem is the mother board where it connects to the screen it is damaged, i also have the docking station and a car adaptor the case has dents as it has been my work phone for 2 years. now upgraded. £40 will get it all including postage in uk.
neil
Hi
I would like to know what memory resides in that xda?
And if is possible you to sell it to portugal????
Thanks in advance 8)
its an early model (wallaby) been used it has scratches on the case, but served me well untill i played with it after buying my new one, hense the damade to the connection on the mother board to the screen.
i hope this helps. yes will send i want £20 plus postage. it also has origional cradle, head phones and car charger.
I want to buy your xda
If you are interested, contact me!.
Hey guys, has anyone found or is currently using a desk cradle for the wing? I would like to get one so I can have less desk clutter.
Thanks
Look here: http://www.htc.com.pt/index.php?pag...ry_id=29&option=com_phpshop&Itemid=44&lang=en
BRSG said:
Look here: http://www.htc.com.pt/index.php?pag...ry_id=29&option=com_phpshop&Itemid=44&lang=en
Click to expand...
Click to collapse
Right nice photo they have there . . . think they could have made it any smaller and more indistinct so that all you could figure out is that the object is black?
Lol, true true, but it was the only official HTC page were I found that accessory...
How exactly does that cradle work? I have a Wing and it has a rubber cover over the bottom ports. Would I have to permanently remove that cover, or does it somehow just "fit" in the cradle, even with a dangling cover.
I got this one for my 4350
http://www.boxwave.com/products/desktopcradle/htc-herald-desktop-cradle_2434.htm
(also some nice screen protectors from the same site)
Don't know about the rubber feet of the Wing through...
this one is cheaper, fits the wing better (has hole for wing's rubber usb port cover), and you can order it & get it in 3 days...
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=190151821791
Yes, it´s cheaper, but the shipping costs are heavy ... about 23$ up to 30 ...
well u look at the total cost, even after shipping it's still cheaper than the alternative.
Found 255 faceplate/covers for WING
Search on ebay, wing, under cellphone faceplates and covers and you will see an auction where a guy has 255 designs to choose from and you get to pick three.
Here is regular one (Model WINGCR)
http://www.igonemobile.com/product.aspx?tab=3&m=721&p=15286
also,
Here is one with extra battery charging slot in rear (Model WINGCR2-MDASP-HTCCG)
http://www.igonemobile.com/product.aspx?tab=3&m=721&p=15286
Both $30 + Shipping...
So I decide to compile a list of housing suppliers for Rhodium:
http://www.eoem.cc/wholesale,T7373+Pro2+-Rhodium-,c432,b0.html
http://eyworkshops.ecrater.com/search.php?cid=1020390&keywords=touch+pro+2&x=0&y=0
http://www.gsm4world.us/touch-pro-2-p-495_210.html
http://www.globaldirectparts.com/HTC-Touch-Pro2-Replacement-Repair-Parts-s/5917.htm
http://www.truesupplier.com/origina...ing-coverkeypad-silve-c-259-p-4-pr-18382.html
http://www.truesupplier.com/origina...sing-coverkeypad-blue-c-259-p-4-pr-18381.html
http://www.truesupplier.com/origina...ing-coverkeypad-orang-c-259-p-4-pr-18383.html
If you know of more, please, do tell. Still looking for one with normal priced shipping.
More info:
Illustrated instructions on Rhodium dissassembly
I kept on checking ebay and waited and waited for the original unbranded housing, as all it seemed to have was coloured ones. Eventually some came onto the market from china for around 50 pounds. It arrived after a week or two and looks to be good quality (ive yet to fit it though as im worried I may mess something up)
You can purchase it also from truesupplier but it is much more expensive. So I advise you keep checking ebay until they come up again. But a word of warning, they go quickly so make sure you snap it up fast
Housing for sale!
I got a replacement housing from ebay which arrived yesterday:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=170549457486&ssPageName=STRK:MEWNX:IT
I had cracked the side of my main chassis, but have managed to fix it with epoxy so I have the replacement housing for sale. Unfortunately it's not OEM (original HTC) as the seller described, but it was a very good price (£27.52) and appears pretty good quality. The mesh section of the battery cover isn't the best fit and the mute button on the rear won't light up as it's solid black rubber. It includes the silver bezel, the battery cover and the main chassis.
If anyone wants it, I'll let it go for £25 inc postage...
Cheers
hi everybody, i live in italy,and my blackstone is dead. i have all the replacing parts from it (not the mainboard, nor the digitizer).
contact me , maybe i can help someone....
pictures here:
http://picasaweb.google.com/simone.pitaro/HtcParts02?authkey=Gv1sRgCK3ZoKWZmrGggQE#
For HTC BLACKSTONE TOUCH HD T8282
USED PARTS
- 1 battery
- 1 car holder
- 1 home charger
- screws (complete serie)
- gps internal antenna coaxial cable
- front speaker
- silicon case
NEW PARTS
- complete cover kit (black)
- car charger (htc)
- 2 front camera module
- 1 rear camera module
- 1 rear buzzer
- 1 display lcd
- 3 screensaver
- 2 usb\extusb cable
- 1 multiconnector (it works on rhodium but not on blackstone)
bye!!!!
do you have any specs/further info on that desk charger/dock?
im wondering if it will support other phones, like the newer HTC androids..
also, are you willing to ship outside of Italy?
Housing & Chassis
* How much do you want for the housing? more specifically I need the shiny plastic aerial cover from the bottom-rear of the phone
* Are you willing to sell the chassis separate from the rest of the housing? I need a replacement chassis with all the aerial stickers in-tact and still attached as my WiFi/BT aerial sticker is torn and no longer functions
* If you're not willing to separate, how much do you want for the entire housing? (front bezel, chassis, battery cover and bottom-rear aerial cover, basically everything in photo 14)
* Are you willing to ship to Australia, if so how much in total?
* Is PayPal an okay payment method?
Thanks
@ veehexx :
the dock charger is specific for blackstone, with an usb mini-b plug. i think u cannot use it on other devices.
@ Swarvey:
ive replyed your mail, the cheapest shipment i found is on fedex, about €60.
Hi,
I was going to buy the housing on ebay, how happen you put it between the unused parts ? If it's new I could buy it from you. I am interested in the docking too, please let me know the prices (complete housing without touch screen and dock)
P.S.: I live in Naples, so maybe this is the best deal for both.
hi smog
i can sell you this:
http://picasaweb.google.com/simone....key=Gv1sRgCK3ZoKWZmrGggQE#5534603652845649058
and the dock:
http://picasaweb.google.com/simone....key=Gv1sRgCK3ZoKWZmrGggQE#5534603489024801522
the price is 40€ + the shipping cost.
let me know if u r interested!
bye!
Hi,
I need gps cable. But I'm from czech republic. PayPal OK. Can you send it like standard letter in "bubble envelope"?
how much you sell the lcd screen?
Buonasera mi interesserebbe il car holder e i 3 screensever io sono di milano potremmo fare lo scambio a mano mi interesserebbe anche l'lcd screen potremmo sentirci via email
[email protected]
Don't know if you still have parts left, but private message sent
rigid flex board
anyone sell rigid flex board?
do you have the - 1 rear camera module part ?
how much you want for that part ?
how much would it be for the lcd to portugal?
Hello.
You still have available some of the parts displayed in this picture?
http://picasaweb.google.com/simone....key=Gv1sRgCK3ZoKWZmrGggQE#5534603617056333138
How much with shipping to Portugal? Accept pay-pal?
Thanks.
Paulo D.
paulojdaniel said:
Hello.
You still have available some of the parts displayed in this picture?
http://picasaweb.google.com/simone....key=Gv1sRgCK3ZoKWZmrGggQE#5534603617056333138
How much with shipping to Portugal? Accept pay-pal?
Thanks.
Paulo D.
Click to expand...
Click to collapse
on ebay its price of U.S. $ 47.99 for shipping costs charged $9.99 Economy Shipping from outside US