Dear all,
I've found the car charger mentioned in object on expansys.com, but before to order it, I'd like to understand if it works with the new HTC Tytn.
Is there anybody has bought this accessory for Tytn to give me a feedback :?:
Thanks a lot
Ciao, Cesare
hello you're right to ask before buy it because some people have problems with classical usb car charger when they used it with tytn.
I'm waiting feedback too !
Cheers
Tom
I have an original charger car charger for the 9100, any ideas if this works with the TyTN
Cato
it work just tested !!!
I'm using an iGo car charger with tip A53 (which I believe is the same for all HTC devices). It works great
http://www.igo.com/product.asp?sku=2545768
http://www.igo.com/product.asp?sku=2709463
adebilloez said:
it work just tested !!!
Click to expand...
Click to collapse
Thanks a lot about your test I'll buy it now ...
Ciao, Cesare
ritmia said:
adebilloez said:
it work just tested !!!
Click to expand...
Click to collapse
Thanks a lot about your test I'll buy it now ...
Ciao, Cesare
Click to expand...
Click to collapse
Dear All,
I've bought it for my Tytn, and it works perfectly :lol:
Ciao, Cesare
Hi Cesare,
Is this something like this: http://www.expansys.com/product.asp?code=123774 ??
I'd like to use this one with my 4mm cable to charge both, my TyTn + my GPS BT mouse.
Thanks,
StonyA
Related
Hi,
Part of my work includes surveying areas for signals. I'd ususally use my laptop for this but it would be a lo simpler to use my XDA. Does anyone know where about on the phone the Wifi Antenna is (id presume witht the GSM antena?) so i can patch in a pigtail adapter lead.
Cheers,
Jim
Check this out
jallansona4 said:
Hi,
Part of my work includes surveying areas for signals. I'd ususally use my laptop for this but it would be a lo simpler to use my XDA. Does anyone know where about on the phone the Wifi Antenna is (id presume witht the GSM antena?) so i can patch in a pigtail adapter lead.
Cheers,
Jim
Click to expand...
Click to collapse
Hi Jim
Im using an SDcard like 802.11G WIFI card.
It works great and does not take alot of battery power.
I recieved the product, with my Imate
http://www.c-guysusa.com/
Thats the manufacturer. Check it out!!
Cheers
would be a good idea to post in the correct section, i also think the info you want is already there.
btw ^^rac the xda2i has wifi onboard.
Aaaahhhh
HEhehhe
I see now its an Alpine XDA2.
Yep, i was referring to Himalaya!
Chizz
Hi ppl, have external GPS for Wallaby which cable connects to the port on the bottom of the wallaby, since Im considering the buying of the Qtek S100 maybe someone know is the connector on the bottom compatible so I can use GPS on S100 too ?
Tnx !
Looks bad.
As much as i know, the S100 has just USB-Interface, and not serial as the Wallaby. Only Bluetooth GPS-Receivers will work....
Stefan
My hands was faster than brain, later I ve checked connectors and found same thing you told Stefan, sorry !
Anyway that S100 has gone before I layed my hands on it (already sold) so now I have offer for 2020. Checked pictures, connector looks the same as in 1010.
Same question, does anyone know are they compatible, intend to use GPS and travel charger from 1010 on 2020...
Thanks and sorry for bothering guys ! BR !
No problem.....
And yes, you´re right Wallaby and Himalaya has the same connector. So they are compatible and you can use your GPS with it.....
Stefan
Thank you Stefan, you are an (blue) angel
Best !
Hi All,
Does anybody know about a compatibility problem between TyTn and BT-338? This GPS was working fine with my previous PDA (Qtek 9090). With my new TyTn I simply cannot connect them
Any ideas are welcome!!! Thx!
Fernando Macedo said:
Hi All,
Does anybody know about a compatibility problem between TyTn and BT-338? This GPS was working fine with my previous PDA (Qtek 9090). With my new TyTn I simply cannot connect them
Any ideas are welcome!!! Thx!
Click to expand...
Click to collapse
I'm using that same BT-338 with my TyTN. It works flawlessly, can't praise it enough. It took abit to get the proper settings but I got mine working with it.
Fernando Macedo said:
Hi All,
Does anybody know about a compatibility problem between TyTn and BT-338? This GPS was working fine with my previous PDA (Qtek 9090). With my new TyTn I simply cannot connect them
Any ideas are welcome!!! Thx!
Click to expand...
Click to collapse
And for points of accuracy, the TyTn is different than the Titan...
Is there such a thing? Would like to connect a different earphone when listening to music
I modified my headset. I can post picture if you would like. It just requires a little bit of soldering.
Is this the sort of thing you are looking for?
Stereo Audio Adaptor
Reteb
look for one on ebay from hong kong i think with built in mic... works fine for me ... only a fiver!!
-http://cgi.ebay.co.uk/3-5mm-Headphone-Adaptor-wMic-HTC-Touch-Dual-Cruise-TyTN_W0QQitemZ170218157594QQihZ007QQcategoryZ14419QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
reteb said:
Is this the sort of thing you are looking for?
Stereo Audio Adaptor
Reteb
Click to expand...
Click to collapse
Thanks, exactly what I'm after
kkhalil76 said:
Thanks, exactly what I'm after
Click to expand...
Click to collapse
Perhaps this one ?
Rgds,
Thanks, already got the other one, more compact as well
FM Working?
kkhalil76 said:
Thanks, already got the other one, more compact as well
Click to expand...
Click to collapse
Did you try to run the FM Radio? Does it work with the adapter?
Yep, works fine
kkhalil76 said:
Yep, works fine
Click to expand...
Click to collapse
Then again, maybe not. For some reason the phone insits on dialing the last dialed number when the usb thingie is connected. This morning it just kept dialing on its own for no reason, really weird.
francescrm
francescrm said:
Perhaps this one ?
Rgds,
Click to expand...
Click to collapse
francescrm, where did you get that adapter from it looks more what I would use than the other one.???
Hi friends i wonder if RC E100 is working with diamond 2?? Or which wired headset is working with diamond 2? If someone has experiences with this device please share..
nec85 said:
Hi friends i wonder if RC E100 is working with diamond 2?? Or which wired headset is working with diamond 2? If someone has experiences with this device please share..
Click to expand...
Click to collapse
RC E100 works fine with Topaz. I have one...
losdrivare said:
RC E100 works fine with Topaz. I have one...
Click to expand...
Click to collapse
thank you for your interest and answer...
I have one too, but if found the Headphone you get with the RC-E100 less copfertable than the original ones you get in the Topaz's box.
I tried several headphones and got to the conclusion that the best ones are Sennheiser MXL51 (they have a nice feature - you can plug-out an additional cord so you don't have a really long cord dangling from them).
I have the RC E100 too and confirm it does work fine with the Topaz. I can't understand why they make the cables so long though. It takes me 30 minutes to untangle it whenever I use it
mitsi said:
I have the RC E100 too and confirm it does work fine with the Topaz. I can't understand why they make the cables so long though. It takes me 30 minutes to untangle it whenever I use it
Click to expand...
Click to collapse
It's long because the remote also contains a microphone for the handfree and the cord has to be long enough for it to reach your face.
losdrivare said:
It's long because the remote also contains a microphone for the handfree and the cord has to be long enough for it to reach your face.
Click to expand...
Click to collapse
Depends what you talk out of.
mitsi said:
Depends what you talk out of.
Click to expand...
Click to collapse
Aha. Now I understand why it takes you 30 mins to untangle it.
Does it work well with the TouchFlo music player, or only with Windows Media Player?
fluke said:
Does it work well with the TouchFlo music player, or only with Windows Media Player?
Click to expand...
Click to collapse
It works well with TouchFlo and Windows Media Player.
One word of warning though - if you use TouchFlo Detacher, it will only work on Windows Media Player (NOT TouchFlo).....