Related
Hi there.
I have an XDAII and the screen has been scuffed, at the bottom where you enter lower case letters, this has happened over time, just with writing so much I suppose. I have replaced the stylus at regular intervals but still, the screen is scuffed. I`ve spoken with O2, one person told me the screen could be replaced, another said it couldn`t, but I had a thought, and here is the question.
Can I open the XDAII, remove the clear plastic screen cover (if that is a cover) and flip it, so the scuff is on the inside?
The scuff itself is barely noticeable, but it interferes when I`m writing.
Any info will be a big help.
p.s. I`m due to upgrade soonish, XDAIIs or something else, most reviews I've read haven`t been very good about the XDAIIs
Cheers
You could try a very fine abrasive polish on the scuffed area only (maybe a fine silver polish like Silvo etc.) and then USE A SCREEN PROTECTOR. I am not shouting just emphasizing the importance. I have recovered many items in this way.
The idea of trying to remove the scuff never even occured, I`ll have a look round the shops tomorow. As for the screen protector, I only discovered them after the problem was there.
Thanks tons
Try toothpaste, it worked with me, but you need to rub for a long time!
Put some toothpaste on a piece of cotton & start rubbing in circles for 15 mins or more...
rub babe rub :lol:
and dont use colgate blue minty gel!!!
the cheap plain white stuff works best for cds, screens ect.
after your first polish with toothpaste, give it a final polish with silvo/brasso or any fine furniture polish.
worked for, good luck
Hi All, since a lot of us are getting the shift now, i guess it's time to think about which screen protector you are going to use, personally i always enjoy the Martin Field Overlay Screen protector, but they don't seems to have one for the shift yet, what do you guys think? found any good screen protector you are going to use?
Hi,
My shift was delivered with a screen protector, I have placed it on the first day and it looks really good. There was no brand on it, so I cannot tell about the manufacturer.
So far I am vey satisfied with it.
jarbi said:
Hi,
My shift was delivered with a screen protector, I have placed it on the first day and it looks really good. There was no brand on it, so I cannot tell about the manufacturer.
So far I am vey satisfied with it.
Click to expand...
Click to collapse
yes, i am aware of that, it just i have been using HTC for more then 7 years now, past experience told me i better wait for better screen protector, because once you put it the HTC one, it's so difficult to remove it, and if you do try to remove it and swap it with something else, you leave a mark on the screen, some user even experience bend and uneven screen because the original one is just so sticky.
There don't seem to be many screen protectors specifically for the Shift yet, I'm sure there will be soon. I fitted the included one but not very well, I managed to get a couple of dust specks under it.
I've ordered some generic 7" protectors from Durasec http://www.durasec.com/catalog/index.php?language=en
I also ordered one of their liquid nanotech screen protector kits, don't know much about it but it appears to be a liquid which you spray onto the screen to form a seal. Should be interesting...
Is it neccessary?
Hi,
please, give me an answer to a stupid question?
Is it really necessary to apply a screen protector. Why don't the manufacturers do it in the first place.
What are the advantages, what the disadvantages. Okay, protection comes to mind as an advantage, but shouldn't the original screen be resilient enough?
I'd really like to here some informative opinions.
I have been using a HTC Vario II for some time now without any protection and I can't detect any scratches.
Settembrini
Has anyone managed to find a decent screen protector yet?
Pantaloonie - how was the durasec one?
I've received them, but haven't got round to removing the original and trying them out. The liquid one is a bit strange, apparently you spray it on the screen then spread it with the included cloth, and it forms a protective layer.... or something. Think I'll be testing that on a cheaper device first!
firedup said:
Has anyone managed to find a decent screen protector yet?
Pantaloonie - how was the durasec one?
Click to expand...
Click to collapse
i am still waiting for the martin field overlay plus screen protector. don't know when they are going to release it.....
Pantaloonie said:
I've received them, but haven't got round to removing the original and trying them out. The liquid one is a bit strange, apparently you spray it on the screen then spread it with the included cloth, and it forms a protective layer.... or something. Think I'll be testing that on a cheaper device first!
Click to expand...
Click to collapse
mmm. sounds interesting!
I've got the original on but I have a scratch on the screen and wanted to remove it to see if its just the screen protector or the actual screen that is scratched. Have tried in vain to get at it to peel it off...
Just managed to get a corner - it came off no problem and thankfully the scratch isnt there! Just need a new protector now, my OCD is starting to kick in. Let me know how you get on with the Duratecs! Cheers
wu5262 said:
i am still waiting for the martin field overlay plus screen protector. don't know when they are going to release it.....
Click to expand...
Click to collapse
sounds posh! I'll check it out, thanks
Screen Protector Ultraclear and a Anti Glare
http://shop.brando.com.hk/search.php?keyword=HTC+Shift&Submit=Product+Search
I have had this for my Athena and Brando also have two versions for the Shift.
Computersylvia
DO NOT by the Durasec. Got mine from Germany, welcome to bubble hell.
Just wish I knew where the original ones are from....
Anyone found any decent ones?
I still haven't tried either of the Durasec ones I bought, as it seems I'll be needing dynamite to remove the original one. It does not want to come off.
Pantaloonie said:
I still haven't tried either of the Durasec ones I bought, as it seems I'll be needing dynamite to remove the original one. It does not want to come off.
Click to expand...
Click to collapse
I'd leave it on if I were you - I only took mine off as it had a hair underneath and I was losing sleep over it. Took a while but once you get a hold of a little corner it lifts off no problem. I've emailed HTC to ask if they can send me another but I'm notn holding my breath.
Would stay away from the standard Duratec - waste of £8. Let me know if you try the liquid one though!
Hi -
Anyone used the liquid Duratec shield on the Shift yet?
Cheers - Dave
Duratec Crap
Hi,
today I removed the original Screen and tried Duratec, the cheap screen protector. They have also got a hightec version or something like that.
Crap! Crappier! Crappiest sheet of **** you can think of.
S.
But which one is really recommendable?
Thanks!
Settembrini said:
Hi,
today I removed the original Screen and tried Duratec, the cheap screen protector. They have also got a hightec version or something like that.
Crap! Crappier! Crappiest sheet of **** you can think of.
S.
But which one is really recommendable?
Thanks!
Click to expand...
Click to collapse
How did you remove the original screen protector without damaging the display? What is the problem with the Duratec screens?
Hi,
removal was difficult, but I did it. I don't know the exact English words. I used this sticky tape which you wrap up parcels with, tape is of a brownish colour. That I stuck onto the screen protector until it lifted in one corner.
Duratec is thin and cheap material and I guess it is not possible to get it on the screen without lots of bubbles.
Now I have ordered a protector from Brando, was that the name?
We will see.
S.
I really like the anti glare screen protector from www.pocketpctechs.com . I use it with my both my SMT5800 cellphone and my Motion Tablet PC. I'm hoping I can get one sized for the Shift. But my Shift is not here yet so I don't know the size. I can't even tell I have a screen protector with this brand.
screen protector abuse
Hi,
any news about the "best" protector.
In the meantime I have abused 4 or 5. Duratec's cheap ones aren't of any other use than to clean the screen from dust particles.
I tried the Brando "ultra clear" was that the name? Relativ easy to apply, but in the end I fiddled with it too long. Had to peel it off.
Next I tried Brando "plus". Easily to apply, but foil slipped underneath the edge of the screen, when lifting it up to clean off a piece of fluff the protectors edge was damaged.
But the last one is really easy to apply. But, but, they or the distributers just declared them to be for the Shift, originally they are for the eee, how many eeeees were there?
So the screen protector doesn't really fit. At the edges there the foil doesn't cover about 1 or 2 millimeters of the Shift's screen.
Maybe somtime soon they will sell a protector that is for the Shift.
Please, if anyone has got the ultimate protector mention it here:
perfect fit and easily to apply would be nice features.
S.
I had my xperia S for about 2 weeks, i really dislike how much glare that it gives off with the stock screen protector. So i already some anti-glare screen protector online.
problem: can't get it off.
I have been picking at this for 15 mins, can't get anywhere. It would come off.
does anyone tips on how i can remove this???
hkguy783 said:
I had my xperia S for about 2 weeks, i really dislike how much glare that it gives off with the stock screen protector. So i already some anti-glare screen protector online.
problem: can't get it off.
I have been picking at this for 15 mins, can't get anywhere. It would come off.
does anyone tips on how i can remove this???
Click to expand...
Click to collapse
Trust me, you have to destroy most of your fingernails..
Insist on one corner only, don't use sharp things such as knifes etc. you could scratch the screen.
reptile64 said:
Trust me, you have to destroy most of your fingernails..
Insist on one corner only, don't use sharp things such as knifes etc. you could scratch the screen.
Click to expand...
Click to collapse
would blow dryer make it easier?
When I removed mine from the arc I followed some advice and used a needle to pick at a corner. This did it straight away after many failed attempts with my nails. Just be careful you don't scratch the screen underneath but you should be fine.
However like I said in another thread I wouldn't recommend it, I think you should not see the factory applied screen protector as a screnn protector but rather part of the screen. It is applied perfectly and no matter how hard you try doing it yourself, you'll never manage to apply one as well...
Also on my arc I never actually notice that much difference in glare...
If you choose to stick a protector on it, I wrote this guild on the best way (imo) to apply a protector, enjoy!
http://forum.xda-developers.com/show....php?t=1652567
I bought a screen assembly replacement (next time it will be better to buy it complete with the front housing), everything is fine but it seems that the edge of the screen arent stick that well (especially the buttom edge - where the back button etc).
I cleaned the original housing before attach the new screen, include in the edges and I've tight it before install the motherboard and etc...
Anyway right now I've putted insulating tape with pressure on the edges and all over the sceen (attached to the back cover of the device), playing a movie on highest brightness (to make the screen hot) and put it on case that pressure on the edges
What else can I do? it wasn't lift up (the buttom edge, each time its other edge) everytime but its annoying.
I guess next time (if not buying a housing assembly) I should put another adhesive on the edges of the glass, seems their adhesive is not enough...
or should it be like that at the first?
//edit - I've found a thread that describe the same problem:
http://forum.xda-developers.com/showthread.php?t=1277367
You have three chices:
1) Try to repair the phone, again.
2) Ask in the thread you've linked to how to fix it.
3) Take the device to someone who can properly install the screen.
f-r said:
You have three chices:
1) Try to repair the phone, again.
2) Ask in the thread you've linked to how to fix it.
3) Take the device to someone who can properly install the screen.
Click to expand...
Click to collapse
Well seems like its happened because there is no adhesive at the sides and at the buttom...
I'll try to stick some adhesive on these places without disassembly the screen, only under the glass sides/buttom...
What adhesive do I need? is this ok? http://www.ebay.com/itm/3M-Attachme...707231?pt=AU_Scrapbooking&hash=item5aefa6425f
to do it properly you will need to remove the screen and get a complete new double sided sticker for your screen, the foam in your link will not allow the screen to sit properly flat down
You're struggles are over! I have been looking for the best screen protector for edge devices and I had to tell everyone. No more touch sensitivity issues, no pressing harder, no more bouncing screen, and no more popping off screen protectors. The Whitestone Dome Glass Screen protector is the best! I made an install tutorial because the worst part is installing it. It's complicated, but watch my video for tips and tricks and you will be an expert in no time:
https://www.youtube.com/watch?v=RaNK59tMsBQ
Warning: As seen in the video at the 10:26 mark it is very important as a beginner that you make sure the surface is level (Use a physical bubble level and have business cards nearby) and leave the alignment bars (Plastic L Shapes) on during the curing process with the UV light, otherwise the screen protector may slide off of the phone. I was doing this for a friend at his house with the table he had, therefor as you saw at the 10:26 mark it began to slide away. Me doing so many installations I was use to this sort of thing happening, and quickly corrected the issue. I find the alignment bars to get in my way when moving the screen to the most case friendly position. However when I started out I did use these alignment bars, think of them as training wheels. Just be sure when you manually align the screen protector that the alignment bars are not lifting out of their 3 bumps and that they are not lifting your screen. Make sure your surface is level otherwise the adhesive could pour over the edges of the phone. Business cards help immensely, along with not working on installation in the middle of a 2 piece table.
Review
Before I continue please keep the "It's too expensive" posts out of here. Other glass screen protectors, Otterbox, Zagg, ect are the same price. You are paying $45 to protect a $800+ phone. Insurance is a $200 deductible. So it's not expensive compared to paying a deductible. You also get an added bonus... The UV light can be used by women or given to women as a gift to dry their nails. Oh you're a guy and have no use for it? Ever had a car windshield chip?
You can get a repair kit and use the UV light to dry the resin, ever paint? UV light to dry the paint, UV light to dry glue, UV light to tan your wedding ring finger... Just kidding don't do that last one. Anyway now that I got that out of the way I came from a S7 Edge and my struggles to find the perfect screen protector were very difficult. I am extremely OCD with my phones and worried so much about cracking the screen. I used the Otterbox Defender after trying screen protector, after screen protector, and after getting frustrated with the touch screen sensitivity issues with the Otterbox Defender due to the built in plastic screen protector and dealing with dirt and easy scratches, I went back to my Note 4. Then the S8 came out and I again attempted to go to an edge phone, and after purchasing the Whitestone screen protector I will say it's made the phone feel just like I never had a screen protector at all. I no longer have a screen protector that for some silly reason only had glue around the edges which made the protector springy/bouncy on every touch. Not to mention that most times the protector would pop off due to lack of glue. This isn't a problem with the Whitestone due to the fully adhesive protector. There's no touch screen sensitivity issues and it feels like I am touching a naked screen. Plus my edge features actually work.
Q&A
Q: What cases work with it?
A: Otterbox Symmetry and Commuter, defenders do not work. I haven't had any other case tests, I am about to purchase the Mophie battery case and test it out. If you have any cases that work well, please let me know so I can get a compatibility list going
Confirmed List
Commuter
Symmetry
UAG
https://youtu.be/sScL3ZyGTgI
Q: Can I put a case on after installation?
A: No you need to wait 24 hours for curing.
Q: Can I use the phone after installation?
A: You will need to wait 1 hour.
Q: How long should I set aside time for install?
A: If you have never done it be prepared for around 1 hour plus the 1 hour wait after before you can use your phone
Q: Do you know if there is a warranty on the product?
A: I'm not sure, I couldn't find anywhere on there for warranty info. I know I received a cracked one and ended up having to purchase another one, file a claim on Amazon, and send the cracked one back.
Here's a review of the Mophie case with the Whitestone:
I can confirm that it works great with uag cases. Also I found a video where they tested 50 cases with Whitestone dome:
https://youtu.be/sScL3ZyGTgI
Great post and vid. I am installing this today and this helps alot. Crossing fingers.
Sent from my SM-G950U1 using Tapatalk
yoyoche01 said:
Great post and vid. I am installing this today and this helps alot. Crossing fingers.
Sent from my SM-G950U1 using Tapatalk
Click to expand...
Click to collapse
Sorry can't edit previous post.
Install done.....successful! The biggest part is applying the epoxy, it is very thin, almost like water. Slowly loosening the cap on the epoxy tube and leveling the puddle is crucial to success. So do it slowly and use cards to level the puddle before releasing the remainder of the ep oxy. Then make sure it flows to the entire screen and you are golden. This video with tips is golden.
Thanks[emoji2]
Sent from my SM-G950U1 using Tapatalk
TheGame7 said:
You're struggles are over! I have been looking for the best screen protector for edge devices and I had to tell everyone. No more touch sensitivity issues, no pressing harder, no more bouncing screen, and no more popping off screen protectors. The Whitestone Dome Glass Screen protector is the best! I made an install tutorial because the worst part is installing it. It's complicated, but watch my video for tips and tricks and you will be an expert in no time:
https://www.youtube.com/watch?v=RaNK59tMsBQ
Review
Before I continue please keep the "It's too expensive" posts out of here. Other screen glass screen protectors, Otterbox, Zagg, ect are the same price. You are paying $45 to protect a $800+ phone. Insurance is a $200 deductible. So it's not expensive compared to paying a deductible. You also get an added bonus... The UV light can be used by women or given to women as a gift to dry their nails. Oh you're a guy and have no use for it? Ever had a car windshield chip?
You can get a repair kit and use the UV light to dry the resin, ever paint? UV light to dry the paint, UV light to dry glue, UV light to tan your wedding ring finger... Just kidding don't do that last one. Anyway now that I got that out of the way I came from a S7 Edge and my struggles to find the perfect screen protector were very difficult. I am extremely OCD with my phones and worried so much about cracking the screen. I used the Otterbox Defender after trying screen protector, after screen protector, and after getting frustrated with the touch screen sensitivity issues with the Otterbox Defender due to the built in plastic screen protector and dealing with dirt and easy scratches, I went back to my Note 4. Then the S8 came out and I again attempted to go to an edge phone, and after purchasing the Whitestone screen protector I will say it's made the phone feel just like I never had a screen protector at all. I no longer have a screen protector that for some silly reason only had glue around the edges which made the protector springy/bouncy on every touch. Not to mention that most times the protector would pop off due to lack of glue. This isn't a problem with the Whitestone due to the fully adhesive protector. There's no touch screen sensitivity issues and it feels like I am touching a naked screen. Plus my edge features actually work.
Q&A
Q: What cases work with it?
A: Otterbox Symmetry and Commuter, defenders do not work. I haven't had any other case tests, I am about to purchase the Mophie battery case and test it out. If you have any cases that work well, please let me know so I can get a compatibility list going
Q: Can I put a case on after installation?
A: No you need to wait 24 hours for curing.
Q: Can I use the phone after installation?
A: You will need to wait 1 hour.
Q: How long should I set aside time for install?
A: If you have never done it be prepared for around 1 hour plus the 1 hour wait after before you can use your phone
Q: Do you know if there is a warranty on the product?
A: I'm not sure, I couldn't find anywhere on there for warranty info. I know I received a cracked one and ended up having to purchase another one, file a claim on Amazon, and send the cracked one back.
Click to expand...
Click to collapse
Hello TheGame7, this is Whitestone.
Thank you so much for taking interest in our product and making such detailed instructional video for installing the Dome glass! Your video was exceptional, the tips and tricks you covered were very clear and precise. We were pleasantly surprised. As you mentioned in the video, we have made modifications to our installing procedure and the tools as well since the initial launch. The only thing we would like to point out is that you should NOT remove the align bars (the plastic things) before curing the adhesive. Experienced people such as yourself will have no problem manually aligning the glass, but some people may panic or completely butcher the installation if they see the glass slipping away. Also, if the glass moves towards the speaker, the adhesive may flow into the speaker or buttons (if applicable). It will not damage or break the device, but it could result in discomfort while using the device.
If you have any questions or feedback that you would like to give us please do so!
Thank you
P.S. We apologize for not being able to directly link our Facebook page. We have just started using xda to communicate with the public and we cannot post external links at this moment.
reyals1 said:
I can confirm that it works great with uag cases. Also I found a video where they tested 50 cases with Whitestone dome:
https://youtu.be/sScL3ZyGTgI
Click to expand...
Click to collapse
Thank you for the info! I am one guy so testing that many cases would have proved to be difficult for me. I have added your confirmed case along with a link to the video in the original post.
yoyoche01 said:
Great post and vid. I am installing this today and this helps alot. Crossing fingers.
Sent from my SM-G950U1 using Tapatalk
Click to expand...
Click to collapse
I'm sure all will go smoothly, don't be nervous, I was at first, but there absolutely is no reason to.
yoyoche01 said:
Sorry can't edit previous post.
Install done.....successful! The biggest part is applying the epoxy, it is very thin, almost like water. Slowly loosening the cap on the epoxy tube and leveling the puddle is crucial to success. So do it slowly and use cards to level the puddle before releasing the remainder of the ep oxy. Then make sure it flows to the entire screen and you are golden. This video with tips is golden.
Thanks[emoji2]
Sent from my SM-G950U1 using Tapatalk
Click to expand...
Click to collapse
Happy to assist. My failures are your success
Whitestone Dome Glass said:
Hello TheGame7, this is Whitestone.
Thank you so much for taking interest in our product and making such detailed instructional video for installing the Dome glass! Your video was exceptional, the tips and tricks you covered were very clear and precise. We were pleasantly surprised. As you mentioned in the video, we have made modifications to our installing procedure and the tools as well since the initial launch. The only thing we would like to point out is that you should NOT remove the align bars (the plastic things) before curing the adhesive. Experienced people such as yourself will have no problem manually aligning the glass, but some people may panic or completely butcher the installation if they see the glass slipping away. Also, if the glass moves towards the speaker, the adhesive may flow into the speaker or buttons (if applicable). It will not damage or break the device, but it could result in discomfort while using the device.
If you have any questions or feedback that you would like to give us please do so!
Thank you
P.S. We apologize for not being able to directly link our Facebook page. We have just started using xda to communicate with the public and we cannot post external links at this moment.
Click to expand...
Click to collapse
Wow I can say I am pleasantly surprised. I didn't think that I would catch the attention of Whitestone themselves. Absolutely brilliant idea with the screen protector I must say! I really appreciate the positive feedback and will make note of your feedback in the topic and video! I do typically remove the alignment bars pre-cure as they get in my way for aligning below the camera. They tend to lift up and sometimes lift the screen protector up while I adjust towards the edge of the camera. My video is the perfect example of making sure you have a level surface and I will make a note in the video and in this topic that newer purchasers of Whitestone will want to have a physical bubble level nearby to complete the task or potentially have level issues as shown in the video or to be sure and keep the alignment bars installed and make sure to keep an eye on the edges for any possible lifting.
@Whitestone Dome Glass
Will there be replacement screen sets be available in the future? So glass, loca glue, alcohol pads and microfiber cloth? Since the curing light and rigg are re-useable it could means easy replacement at much lower cost.
reyals1 said:
@Whitestone Dome Glass
Will there be replacement screen sets be available in the future? So glass, loca glue, alcohol pads and microfiber cloth? Since the curing light and rigg are re-useable it could means easy replacement at much lower cost.
Click to expand...
Click to collapse
Hello reyals1, its Whitestone.
We currently do sell replacement kits on Amazon and are working on providing it on all the different online retailers we are working with!
I hope this answered your question, if there are any further questions or feedback please let us know.
Thank you.
Whitestone Dome Glass said:
Hello reyals1, its Whitestone.
We currently do sell replacement kits on Amazon and are working on providing it on all the different online retailers we are working with!
I hope this answered your question, if there are any further questions or feedback please let us know.
Thank you.
Click to expand...
Click to collapse
Please can you give a link to buy?. I bought in europe from mobilefun.co.uk but I don't find any replacement kit. After 2 week screen show some scratch that I can't explain but I don't want buy full package
raimondomartire said:
Please can you give a link to buy?. I buy in europe from mobilefun.co.uk but I don't find any replacement kit. After 2 week screen show some damage but I don't want buy full package
Click to expand...
Click to collapse
Since the replacement kit is only 5$ cheaper than a new kit (on amazon) it might be easier to buy a complete kit and sell the uv light to a woman who wants to use it for her nails.
The replacement kit should not cost more than about 10$, imho
Whitestone Dome Glass said:
Hello reyals1, its Whitestone.
We currently do sell replacement kits on Amazon and are working on providing it on all the different online retailers we are working with!
I hope this answered your question, if there are any further questions or feedback please let us know.
Thank you.
Click to expand...
Click to collapse
Do you have any plans to sell these on amazon UK at any point in the future? I really want to try one but would rather use Amazon to a third party site to ensure I get a genuine kit.
faybarn said:
Do you have any plans to sell these on amazon UK at any point in the future? I really want to try one but would rather use Amazon to a third party site to ensure I get a genuine kit.
Click to expand...
Click to collapse
Hello faybarn, its Whitestone.
We currently do not sell on Amazon UK, we are still working on expanding our market! We may be able to sell on Amazon UK in the future. If you are still interested in buying our product, you can purchase it from Mobilefun.
If there are any further questions or feedback please let us know!
Thank you!
To anyone wanting to know the Mophie S8 and S8+ cases work great with this screen protector! I'll make a review video soon for it. The top of the case separates and you slide your phone in (no more plopping it in and out of a case hoping it doesn't touch the screen protector) then you slide the top down and it fits perfect. It's a 3300 MAH battery pack and from 25% with the phone on, it got me to 90% while I was using the phone. It also feels like it matches with the curvature of the phone. I recommend trying it out in store, as it is a bit heavier, but no where near as heavy as a ZeroLemon 10,000 MAH battery I had for the Note 4. Attached are some screenshots with the case and screen protector. Oh the speaker redirect to front is really nice too!
Here's a review of the Mophie case with the Whitestone:
Hi
I've bought one, but I mixed two align bars and now I don't know which align bar is for top and which is for the bottom. They are a little different. as you can see in pictures one has a small sticker attached to it at 45 degree angle while in the other one it is attached straight.
can anyone help to place these correctly?
If fitting this goes horribly wrong, or if the protector gets damaged in an accident later, how easy is it to remove it again after the glue has cured and will any residue be left on the screen?
Andre
andrewilley said:
If fitting this goes horribly wrong, or if the protector gets damaged in an accident later, how easy is it to remove it again after the glue has cured and will any residue be left on the screen?
Andre
Click to expand...
Click to collapse
Look at this video, this will answer your questions, it's very clear
It does seem to stick very well to your phone so that's good, I hate the usual (crappy) tempered glass protectors that only have glue on the sides... 1 "wrong" case and *pop* there it goes :/
has anyone try out the combination of spigen neo hybrid with the whitestone dome?
pan_zhengwei said:
has anyone try out the combination of spigen neo hybrid with the whitestone dome?
Click to expand...
Click to collapse
Yeah...i have it for few months...great combo
Sent from my SM-G950F using Tapatalk
Proday said:
Yeah...i have it for few months...great combo
Sent from my SM-G950F using Tapatalk
Click to expand...
Click to collapse
do you mind sharing how's the alignment of your protector? mine doesn't seems to fit along with the case