Hi,
My xda (PW10A1) shows the message "Unable to load datafile" when i turn it on. This happens after a short moment with an O2 logo.
The error accours since I deleted some O2 software. How can I get my Pocket PC software back on or how can i update it?
Thanks
You could do a hard reset.
Press the littel button on the right sode lower the earphone connector twice. This will do the job. But you will loose all data on your device.
Stefan
Related
I have a HP rw6828 as my second PPC.
I read the following thread and download the new version of RUU from HP's official web site.
http://forum.xda-developers.com/showthread.php?t=283678
http://h18007.www1.hp.com/support/files/HandheldiPAQ/us/locate/1129_6331.html
it starts ok, but when the updating progress is nearly 90%, the hpRUU.exe jump out a Fatal Error window telling that it has to stop!
I kept waiting for about 30mins the screens no change, both my Laptop and PPC.
I pulled out the USB cable, the PPC's screen kept on as no change. I insert the USB cable and run hpRUU.exe again, it seemed like "searching" sth and finally the same Fatal Error occur.
I pulled out USB again, and poke the reset hole, it turned down and, never turn up again! no matter what I do, press the power button, or the hard-reset combination, the screen just keep purely dark.
Is this so-called a BRICK?
Just inform those who want upgrade your 6828, make sure you are ready before you brick it~~~
so,did u make him alive?
I was trying to flash my G4 wizard with faria wm6 rom and it kept stopping at 99% and telling me to unplug usb and battery then re pluggin usb and hit next so that was gonna b a never ending circle so I searched Google and found RUU_Prodigy_2210206_22102109_021911_TMO_UK_WWE_Ship
flashed that and worked. (should have left it and called it a day but i wanted to try wm6 so found a new version of shelltool_bugfixed_2 tried again. Within 3 mins there was an error on the pda screen but the flash told me not to touch anything so I left it 20 mins. Did "ctrl, alt, del" and the program was not responding so I closed it. Now when I turn the phone on it hangs on the t mobile splash screen with my IPL/SPL. I did the reset with the camera button held in I get the the boot screen/3 colour screen and when I plug in usb pc makes noise saying it found it but then I try flash using t mobile rom it gives me error 274 cant connect make sure usb is in.
I tried doing searches for "error 274" but don't return any finds which I thought was wrong so to test the search button I done a search for "G4" same again =(
sorry for such a long post.
K well I finally got the t mobile basic rom back on just kept pressing buttons on the phone while it was searching for it, not very technical I know! now should I try a 3rd time to get WM6? u know the saying "3rd time lucky!"
well i did the silly thing and did a flash upgrade on my atom exec to WM6 v7
it went 100% restarted fine
but now!!!!! im stuck on the align screen it doesnt listen to my taps, if i move my fingers all over the screen it eventually pick it up but it isnt accurate enough so keeps restarting the test align session... HELP PLEASE i have meetings comming up and need this phone
i can get into boot loader mode but when i connect phone to laptop it doesnt connect active sync while in bootloader mode...
can i skip this screen align somehow
You are not suppose to upgrade the EXEC with the ROM .
Check out the WIKIPEDIA ATOM solutions page for assistance.
I think therz a way to get back to the ORIGINAL ROM , ask a SENIOR for help also search the forums for older posts , i remember someone with ths same problem as yours
really? i just ran the utility here:
http://forum.xda-developers.com/showthread.php?t=333165
without making any changes to it
how do i go back to original pleaseeee help someone... if i got in boot loader mode and run the same upgrade utility (as linked above) it lets me click upgrade but then quickly says connection failed and then my bootroom reads:
"please use DSUU in OS mode and sync with PC first!!!
where do i get original and how do i do it please... maybe there should be a sticky for stuff ups like this
wow no one is kind enough to help... ive tried this:
http://forum.xda-developers.com/showthread.php?t=331818&page=1
but it freezes on 6% and i took the advise read in the wiki to hard reboot then run DSUU , and it does the same thing (stuck at 6%)
well now i have the wm5 starting but its stuck again on the tap the screen? ignoring my taps...
could it be my screen is stuffed? although it worked before the flash
okay !!! progress!!!! ....'
ive finally called o2 and put their rom and it works to a certain point, the align screen detects my taps but it just keeps repeating over n over n over asking me to keep taping around the screen???
Hard Reset
I think hard reseting it once should solve the issue...........if it doesn't try reflashing it once again.....worked for me............brute force is needed sometime
no i figured its screwed my digitzer somehow so im asking for calibration data in other post
Hi
When I turn on my phone all it shows is red, green, blue and white stripes across the screen with the following text:
ROSE100
SPL-1.54.0000
MicroP-Rose (LED) v10
MicroP-Rose (key) v5
PCBID 0x80
RID 0x0
At the bottom of the screen it also says "Serial", but displays no actual serial. Please see attached pic.
Please help guys. Problem initially started when phone collected dew on cold morning (camping).
Thanks!!!
You seem to be in the "flash screen".. I did that on my phone by accident, pressing power and one of the volume buttons.. Try pulling the battery out, put it back and see if it starts normally.
I have the exact same problem. Mine happened all of a sudden for no reason after turning my phone off and trying to turn it back on. Please post if you find a solution
Well, you can try to reflash your ROM. Many official ROMs can be found here.
Hi, I got the roms, but where can I read how to put the new one on my phone using my computer?
Ok, I got it I just run the .exe file to update my rom. However, there is just one problem, it says you should connect activesync to your phone. How tf do I connect activesync as my phone does not load any OS?! I tried without activesync but it doesnt work - it freezes on 0% update and after a while it runs some kind of recovery steps. So how do I get pass the activesync thing? Thanks
You can't upgrade ROM via activesync if u don't have acces to windows mobile, you can do it only from SD card.
Here http://www.megaupload.com/?d=M7OEOF2N (pass: xda) you find a Rose service manual and at the page 45 you find "ROM Image upgrade thru SD card" ...it's not complicated, read carrefuly.
Ok I read it but when I press the power button for the second time it says "No image file". I renamed the file to RoseIMG.NBH. What am I doing wrong?
I don't know what are you doing wrong ...try to rename the file to "ROSEIMG.nbh". Where did you download the ROM? ...I recomend you to put the same ROM you have on device because you don't have installed HardSPL (and I don't know if you can install it from SD card). Here http://forum.xda-developers.com/showthread.php?t=599520 are the officials roms for S740.
PS: I never tried this method on S740, I do it once on tytn II and works perfectly.
Here is how I got it to work:
Left it in the boot mode with the colorful screen until the battery is decharged enough, then tried to put it on again and it automatically turns off. So I put the USB cable in it and walla it started loading the battery and it turned on automatically and loaded WM. However, I still can not flush my ROM even through activesync.. but I am glad I can use it again.
something many forget with this fault, and I have seen quite a few is it is often not a rom issue but a hardware problem... in this case it may be a faulty up volume button, or maybe the plastic cap has shifted keeping the button held down, does the button still click ok?
The monet was a swine for the camera button giving up the ghost and doing nothing but dropping to boot loader......
so my friend called my phone and i proceeded to slide the answer key. it froze right at the end of the slide. I waited a while and nothing happened. Stupid of me, i didnt have a pen for the soft reset so i just pulled out the battery....iknow im an idiot.
so after i restart it, it gives me this one error message (upon others that i was not able to record.)
"the file cprog cannot be opened. Either it is not signed with a trusted certificate or one of its components cannot be found. If the problem persists, try reinstalling or restoring the file."
i tried doing many soft resets and got the same error messages upon trying to load the main screen (with sense)
is there anyway to salvage my phone? I dont want to hard reset if i dont have to.. all my numbers and pictures werent backed up..
please help i dont know what to do... now the phone is stuck at the loading white HTC page before the quietly brilliant logo pops up..