Related
Well, I'm just not having a good year.
Before anyone jumps on me -- I've been digging through the wiki and forums for the past few days, and it doesn't seem like anyone else had had a similar problem...
I just received my JASJAM back from the service center. They said they couldn't fix the trashed radio ROM (good ol' Windows XP blue screened on me), and needed to replace the motherboard ($590), and it wasn't covered under warranty due to the "non-iMate software" I had installed. doh. I declined, and had them send it back to me. In the time between them receiving it and me getting it back, all of the cool new stuff from pof and olipro have come out (Hard SPL, etc). So I'm thinking I could fix it myself.
I put HardSPL on there, started to flash a new radio ROM, and it locked up for 90 minutes before it just went blank. It was getting power from the PC, the PC didn't fall asleep.. it just.. died.
Now I just get the red LED when it's plugged into power, and no LED when the battery is installed. The LED turns off when the battery is installed while there's power going into the unit.
I'm pretty sure this thing is a goner.
I've left the battery out for an hour or so, plugged it back in, same results. I tried the "pull power, pull battery, plug in power, plug in battery, reset" technique from the wiki - no difference.
Too bad this didn't happen before -- I bet iMate would replace the stupid thing now because it won't power up (I already called them -- the serial number has been blacklisted so they won't do anything for me, even if this is a hardware problem). :-\ ... I've considered sending it back and pay them to replace the system board... but I can buy a new TyTN for $650... and I'm sure something better is right around the corner from HTC, so I don't really want to spend the money on a system board replacement.
So I guess this post has two purposes: does anyone have any last resort ideas on how to get this thing to at least come back up to a boot loader... I'd be happy if it would even try to power the LCD panel back up.
If not... anyone want to buy a toasted JasJam off of me, for parts? It's got a front camera.. *wink wink* 8525'ers..
That sucks; but if there's no power at all, I'm guessing it's pretty toasted.
So, how much do you want for it?
im willing to buy the case and screen from u... hehe msg me or email me
my case has a few dents and scratches im want to take out... and the screen.. well =(
I assume that you can't get to bootloader mode?
Before you give it up for dead at least post your info in the "dead hermes? corrupted radio? Post comments here" sticky thread. The experts will review your post and they have been known to provide tips that fixed phones that others had given up for dead. Can't hurt to try and it could save you a few $$$.
How much do you want.. i may be interested!
Well, imei-check.co.uk does offer a repair service... Send them an e-mail (they'll ask you whether you used Pof's unlocker - which they call "cloned/cracked" - answer NO! else they'll add 20 pounds to it!)
Yannick
Even though there is nothing on the screen, while the red button is on try and go into the bootloader.
I am having the exact same issue after trying to upgrade to the new AKU 3 ROM from my SD card.
My screen went blank just at the beginning of the upgrade and since it does not power at all.
I follow the instructions mentioned in thread about this issue:
http://forum.xda-developers.com/showthread.php?t=286469&p=1077622
but after inserting at different time the battery when it is powered on, the red light goes off, so I am enable to do any soft reset.
Do you think it could be a related battery issue (my battery is a 3 months old original one).
Any suggestions are welcome!
Wam7 said:
Even though there is nothing on the screen, while the red button is on try and go into the bootloader.
Click to expand...
Click to collapse
No such luck. My PC isn't even recognizing it on the USB bus. I tried on two other machines, and it doesn't show up there. Nothing on my Mac or Linux boxes, either. :-\
Grr.. I wish it had done this before I sent it to iMate for repair -- they would have swapped out the systemboard without giving me the grief of "you put non-iMate software on here, no warranty service for you!"
Heh. Expensive lesson learned. This is what I get for constantly trying to tweak and improve something that really didn't need to be tweaked and improved.
I'm probably just going to replace it with a TyTN/HERM200 now - I like the layout/d-keypad on it better.
I guess that planned Las Vegas vacation will have to wait a few more months. doh.
Cuivienor said:
Well, imei-check.co.uk does offer a repair service... Send them an e-mail (they'll ask you whether you used Pof's unlocker - which they call "cloned/cracked" - answer NO! else they'll add 20 pounds to it!)
Click to expand...
Click to collapse
Already tried; they replied that it sounds like a hardware/system board issue and to send it in for service.
Of course, iMate refuses to fix it because they saw the 1.01MFG bootloader on there from when it originally died on me and have declared it out of warranty.
Originally I messed it up when I flashed the newest HTC ROM on there -- my windows machine blue screened. It toasted the radio rom. This was before HardSPL/etc, so I tried to downgrade it to 1.04 with no luck, then I managed to get 1.01MFG on there. From there, it refused to let me update anything, and I couldn't get back to 1.04 (in other words, it wasn't acting like *anyone* had said it would in the forums/wiki). From there, I was stuck with the HTC Rom (that had a big "TEST ROM" on the screen), booting into AKU3, and no way to put the JASJAM ROM back on it. So. yeah. I screewd myself by sending it to them for repair and not waiting for HardSPL/etc to be released.
Last night I was able to get the latest oilipro bootloader on it, and it was happily accepting a new radio ROM when it just powered itself off in mid flash. The red LED went on, and it just sat there. It hasn't done anything else since.
So I guess final word is: if you brick your device, before sending it in to the warranty... Well you should brick it a little more!
I hear microwaves can help you there
jmat said:
Last night I was able to get the latest oilipro bootloader on it, and it was happily accepting a new radio ROM when it just powered itself off in mid flash. The red LED went on, and it just sat there. It hasn't done anything else since.
Click to expand...
Click to collapse
Well, If it let you get olipro on it there is still hope! Maybe a bad battery causing the shutdowns?
Cuivienor said:
So I guess final word is: if you brick your device, before sending it in to the warranty... Well you should brick it a little more!
Click to expand...
Click to collapse
Exactly. Make sure it won't even turn on. LOL
JasenR said:
Well, If it let you get olipro on it there is still hope! Maybe a bad battery causing the shutdowns?
Click to expand...
Click to collapse
Nope; I've tried a different battery and different power cables. Tried direct power, USB power.
There's nothing showing up on the USB bus at all -- it's not even showing up in USB monitor. On my Linux machine, the USB Host isn't seeing it.
It's dead. Other than the single red LED when it's only plugged in (with no battery).
I've done every key combo, tried to get into KITL (but without a USB link, it's a no go).
LegolasTheElf said:
I hear microwaves can help you there
Click to expand...
Click to collapse
Hah. I bet sending 12-24 volts up a USB cable would do the trick as well.
jmat said:
Hah. I bet sending 12-24 volts up a USB cable would do the trick as well.
Click to expand...
Click to collapse
go for the gold and apply 110
I had the smae problem with my 8525...It was toast, I sent it back to Cingular who repleaced it under warranty.. ."I dunno..it jsut died, you think a power surge or soemthign could cause this?"
short answer according to everything i read here when it happened to me...you're done.
Damnit and double damnit.
I've the EXACT same problem, but I didnt flash mine (at least in the last 5 days) Orange will not replace mine as the battery "moisture alert" has turned red spotted meaning - according to them, that I have kept it in my Speedos while I have been swimming, which isnt the case. It has been in humid environments tho, but what argument do I have?
If anything does work, ill be sure to let you know.
@scibot : this is abusive from them. I would try again at a different store if I were you. Tons of reasons this could happen, none of them your fault. I'm sure you'll find a decent explanation for the presence of that spot
Hey guys ..
i just installeerd Faria WM6 rom on my SPV M3000, and after the reboot (when it was finised) it came back and just went black.
I cant start the dham thing any more. The battery led isnt up also when attached to the powercord.
Any help please!!
MrRichz said:
Hey guys ..
i just installeerd Faria WM6 rom on my SPV M3000, and after the reboot (when it was finised) it came back and just went black.
I cant start the dham thing any more. The battery led isnt up also when attached to the powercord.
Any help please!!
Click to expand...
Click to collapse
You might want to give more information if you want help. There is no way we can truly help without making ASSumptions with what you have provided. You might get bad advice if people make the wrong assumptions about your specific situation.
Have you ever had a successful flash to a non-carrier ROM before?
How did you attempt to flash the Faria ROM?
Are you CID unlocked? And if your answer is yes how did you do it?
What are/were your IPL/SPL?
Did you attempt to flash a bootloader (IPL/SPL)?
Was your battery 100% charged before your attempted flash?
Have you removed and re-inserted the battery and then tried to turn on phone?
Do you have wall charger or just USB charger?
Zzan said:
You might want to give more information if you want help. There is no way we can truly help without making ASSumptions with what you have provided. You might get bad advice if people make the wrong assumptions about your specific situation.
Have you ever had a successful flash to a non-carrier ROM before?
How did you attempt to flash the Faria ROM?
Are you CID unlocked? And if your answer is yes how did you do it?
What are/were your IPL/SPL?
Did you attempt to flash a bootloader (IPL/SPL)?
Was your battery 100% charged before your attempted flash?
Have you removed and re-inserted the battery and then tried to turn on phone?
Do you have wall charger or just USB charger?
Click to expand...
Click to collapse
My M3000 is CID locked and try to flash it with ShellTool.
I did it yesterday with the Wizard_Love ROM and that worked fine.
my ipl/spl was 2.18.001
i tryed it with the wall charger and the USB charger but no results, also removed the battery
can some one help me??
Zzan?
MrRichz said:
can some one help me??
Zzan?
Click to expand...
Click to collapse
First order of business is to get it booted at least into bootloader.
You are going to need to troubleshoot to see if you have a hardware failure or a battery failure.
Do you know someone else that has a Wizard that might let you use their battery for a couple minutes? If not search the forum for the 9-Volt trick to try and "jump start" the battery. Other than that the only other thing I can think of is to buy a new pre or partially charged battery.
If you can get your phone to at least show some signs of life we can proceed with trying to get it back to a usable state.
Zzan said:
First order of business is to get it booted at least into bootloader.
You are going to need to troubleshoot to see if you have a hardware failure or a battery failure.
Do you know someone else that has a Wizard that might let you use their battery for a couple minutes? If not search the forum for the 9-Volt trick to try and "jump start" the battery. Other than that the only other thing I can think of is to buy a new pre or partially charged battery.
If you can get your phone to at least show some signs of life we can proceed with trying to get it back to a usable state.
Click to expand...
Click to collapse
i went to a little phone store in town, there the had an other battery, but it didnt help. According to the little chinees guy its a hardware failure. The mainbord has the be replaced. And so he did (20 euro's).. So now my M3000 is turned into a Qtek9100 ipl1.03/spl1.06/gsm01.04.10/os1.3.7.10.
Thnx for the help anyway
well, you can upgrade the qtek alot easier, since its a G3..
MrRichz said:
i went to a little phone store in town, there the had an other battery, but it didnt help. According to the little chinees guy its a hardware failure. The mainbord has the be replaced. And so he did (20 euro's).. So now my M3000 is turned into a Qtek9100 ipl1.03/spl1.06/gsm01.04.10/os1.3.7.10.
Thnx for the help anyway
Click to expand...
Click to collapse
Glad to see you got it fixed relatively cheaply. And the new mainboard is a 1.xx G3 so you should be able to CID unlock easily and quickly without having to downgrade first. Then flash your favorite 2.xx carrier rom and off you go into the realm of custom roms
oh men i think you can help me the chinnise guy change your mb at 20 euros???
if this is true where are you from and tellme if you can make me a favour
TRy taking the battery out for a couple minutes... Then re-insert and try turning on, the power light should come on then
Blah nevermind, shoulda kept reading, you fixed it already
no bootmode no on no led is a brick an i need a mother board
MrRichz said:
i went to a little phone store in town, there the had an other battery, but it didnt help. According to the little chinees guy its a hardware failure. The mainbord has the be replaced. And so he did (20 euro's).. So now my M3000 is turned into a Qtek9100 ipl1.03/spl1.06/gsm01.04.10/os1.3.7.10.
Thnx for the help anyway
Click to expand...
Click to collapse
what kind of part was it, and where to buy?
I have sold it
so the topic can be closed
(last I had the same thing, but one of the buttons keeps hanging
when I solved that problem, the qtek came back to live (after the rianbow screen)
thanks folks.
Help I updated my radio for vilain rom 10 and i thought something was wrong when i saw the phone and the box so i pulled out my battery and it wont turn on
That picture i normal when you flash a radio.
Never pull out the battery at that state. I Think its bricked
Yes sorry it's bricked
Sorry to hear, If you can get the phone to give you any sort of life then it is not bricked, just on vacation.
But if not you could always put your phone to good use.
Sorry i could'nt resist.
MacaronyMax said:
Help I updated my radio for vilain rom 10 and i thought something was wrong when i saw the phone and the box so i pulled out my battery and it wont turn on
Click to expand...
Click to collapse
Well if you ever come beck then try this. If you haven't already installed the drivers for your phone onto your computer do it now. Plug your phone into your your computer do you get a light or try to plug it into charger if you get a light it's not bricked. What you want to do if it's not bricked is run a ruu on it.
No Light :'(
Would htc cover this and send a replacment or will i need to buy a new phone ?
Telling them you tried using custom ROMs wouldn't get a repair,... You could say you were just doing a "restore to factory settings" and your battery died. Its worth a try.
Okay thAnks i migjt try and say it ran out of battery updating to the new 2.1 because personaly i think its slughtly mire belivable what do you think, also just in case i was looking for new android phines kind of off topic here but has anyone seen the samsung beam i mean wow its a projector shame i hate the ui and xda doesnt have it
Oh also i forgot is there anything to unbrick it , like a pandoras battery and magic mem stick ( dw if youvdont know what it is.but it csn be used to unbrick a psp and works even though i went through six psp s in a year lol
Yes say that once it is officially released for your region.
You could check the dream and magic forums to see if they ever recover any bricked handsets?
-------------------------------------
Sent via the XDA Tapatalk App
Okay Thanks will do
Okaaay sooo some people have unbrcked thier magics with jtags and be able to get it working again , but cant find any tut or anybody who has done it on a hero , , but i have seen somepeople say take the battery out and leave it for 24 hours
don't see how it will help but it's worth a try
http://www.firstdroid.com/tutorials/252_hero/
Found this but i gues i will have to wait for a tut :sigh:
Bump ?
Htc will fix it or send a new phone within 7-12 days
Hi everyone, I have been playing with a Nokia Lumia UK model for a few months now and everything has been great until last Saturday...when I plucked it from my pocket and it wouldn't do anything...it wouldn't come on, reboot or do anything.
I guess it might have something to do with the minimum battery indication problem and it not holding a charge so I tried charging all night and have tried plugging it and out, switching it on and off, holding the power button, doing a hard reset to no avail.
If I have it connected to the charger and I hold the power button down, upon release the device will buzz and then about 2 mins later it will buzz again and thats it.
I thenhad the idea to plug it into my PC and hold the power button and one of two things will happen - it will buzz and then show up as a USB Input Device with the ID USB\VID_045E&PID_0773&REV_0664&ML02 or if I do a hard reset holding the camera button, volume button and power button it will buzz and shows up on my PC as removable storage and a Qualcomm CDMA Technologies MSM. If I browse the volume in the disk management console I can see the partition structure of the device...
I have been struggling to get anything from my lovely Lumia and wondered if anyone had an idea I could try...would deleting one of the partitions force it to do a ROM reset or something to bring it back to life?
I'm not sure this will work, but it might. However, if it does, it will completely wipe your phone and put it back to factory settings.
Download Nokia Care Suite 5.0 (2011.51.2.63048), link here: http://mir.cr/T38IZ2V1
Then use Nokia Data Package Manager (download here: http://www.seidea.com/category/data-package-manager/) to download an RM-801 firmware that is the same product code as your phone.
Then follow recovery procedure here: http://www.seidea.com/2011/12/28/nokia-care-suite-5-0-2011-51-2-63048/
Good luck.
Hey i have found one having the same problem as that of yours but then here forums.techarena.in/portable-devices/1450618.htm are some solutions that you can try out, just check it out and see if it it helps.
removable storage
Oh man i formated the removable storage on my computer and after that my phone doesn't work anymore. I don't know what to do. if you have news on that pelase send it to me. Thanks
topcms said:
Oh man i formated the removable storage on my computer and after that my phone doesn't work anymore. I don't know what to do. if you have news on that pelase send it to me. Thanks
Click to expand...
Click to collapse
Depending on your technical knowledge you could try to reflash a Rom on Linux or visit a Nokia Care Point...
Lumia 800 fisical partition lost
ChrisKringel said:
Depending on your technical knowledge you could try to reflash a Rom on Linux or visit a Nokia Care Point...
Click to expand...
Click to collapse
Yes i took it the a nokia care center. But i didn't know a could do it myself. How is that possible? I'm gonna have to pay R$150 ( about $80) to get that fixed here in Brasil and to make things worst the nokia care point didn't garatied that it's going to work. They said that they don't have the tools yet to fix this phone. How can i make the computer tecognize my Lumia again? do i use the same method? volume up and plug the usb in? Thank you..
if it;s caused by a crash ,i think flash a rom will do nothing help
Please help me, i am in the same case, i foratted the removable disk because of windows asked !
so now my phone won't power on and is invisible in windows please help me to recover the bootloader with lunix or other !
thanks
oops~obversely you haven;t do your homework before you started on doing it
next time don't let your hand work faster than your head
now,you can try to recover your phone by using Nokia care suit.....
good luck
Ok mate, but nothing happens when phone is connected to pc even if under linux (ubuntu 11.10)
any ideas ?!
Please help
Hi, is there anyone with a solution for this problem? I really want my lumia 800 back. Thank you
topcms said:
Oh man i formated the removable storage on my computer and after that my phone doesn't work anymore. I don't know what to do. if you have news on that pelase send it to me. Thanks
Click to expand...
Click to collapse
Unfortunately, from what I gather from the unlocked bootloader thread, it seems that if you formatted the removable storage it's basically impossible to recover the phone with any of the current tools so I think you guys are out of luck
@mfurse just plug it to the power source (USB , socket , it doesn't matter ) and keep the phone warm!!!!
It will "jump start" it
I did that twice for my girlfriend's phone and it works
I just plugged it to my USB and left it on my overheated laptop keyboard )))
Sent from my Galaxy Nexus using XDA
topcms said:
Hi, is there anyone with a solution for this problem? I really want my lumia 800 back. Thank you
Click to expand...
Click to collapse
i'am in the same case, phone bricked, no power on, no vibration , nothing at all .
devs help us
Hi,
I try to install wm 6.5 rom to my phone hd2 t-mobile.. and phone have stuck, now i can't enter to bootloader.
I try this rom version..RUU_Leo_HTC_ARA_1.66.415.9_Radio_15.37.50.07U_2.10.50.08_2_Signed_LEO_Ship
now means I damage my phone?
sorry for bad english
any help?
tmo usa? red end key green send key?
If yes then yes, it is dead. JTAG only fix.
yes, usa t-mobile
hell1986 said:
Hi,
I try to install wm 6.5 rom to my phone hd2 t-mobile.. and phone have stuck, now i can't enter to bootloader.
I try this rom version..RUU_Leo_HTC_ARA_1.66.415.9_Radio_15.37.50.07U_2.10.50.08_2_Signed_LEO_Ship
now means I damage my phone?
sorry for bad english
Click to expand...
Click to collapse
Flashing multiple times are harmful for any ROM.
Anyways, just download the original winmo from HTC site for your mobile.
Go to the tri color screen (switch off your mobile then pressing power button and repeatedly pressing volume up/down buttons will make your mobile enter tri color screen), and connect your mobile to PC . USB will be shown in your mobile once connected.(I hope you have necessary drivers installed...if not install windows mobile device centre.)
And flash the ROM. N be patient....it may take some time..10..15mins. Just wait.
Once you have installed stock ROM , you can switch to another. But read flashing instructions properly then install custom ROM.
Sent from my T-Mobile HTC HD2 using XDA Premium.
Sent from my T-Mobile HTC HD2 using XDA Premium.
He flashed a non tmous rom to a tmous phone, , , , dead phone.
Although I couldn't help noticing that that rom claims to have a 2.10.50 radio which in theory shouldn't brick a tmous, however it will be about the only non tmous stock rom that WOULDN'T brick a tmous.
@OP, care to explain in more detail what
phone have stuck, now i can't enter to bootloader.
Click to expand...
Click to collapse
means? Does it power on but doesn't go into bootlaoder, or does nothing at all happen?
Details details details
can u detail ur bootloader..
can tri color on nothing happend
phone no working, I can't enter to tri color screen :/
then I instaling rom he stuck on 50% and i waiting about 30-40 min, then I remove battery and I wanted to try again to reinstall
sorry for bad english
hell1986 said:
phone no working, I can't enter to tri color screen :/
then I instaling rom he stuck on 50% and i waiting about 30-40 min, then I remove battery and I wanted to try again to reinstall
sorry for bad english
Click to expand...
Click to collapse
Man, what are you trying to do?!!
Are you flashing the stock WinMo ROM? Without entering the tricolor screen!! Seriously!!
Just do the following steps:
1) Download original factory (stock) ROM from HTC website for your mobile.
2) Install WMDC(windows mobile device centre) in your PC.
3) In Mobile, enter tricolor screen,
Method:
Start the phone by pressing the vol down and power buttons together.
4) and when the tricolor bootloader appears connect your mobile to PC and flash the winmo ROM.
Sent from my T-Mobile HTC HD2 using XDA Premium.
I try use android, but android is very lagy and I wanted to reflash stock rom .. To internet I found this guid http://www.jayceooi.com/2011/08/15/how-to-restore-stock-rom-on-htc-hd2-video/
but reflashing phone he stuck... and now I can't it turn on
ok, now i'm a little confused exactly what position your phone is in.
1 I THINK what you mean is that the flash failed, and the phone now does nothing, nothing at all, screen stays black, no lights, nothing, is that right? (Because that's what i would expect from flashing a non tmous rom onto a tmous phone)
2 however, you could also mean that it starts, but wont do anything, and you cant enter bootloader, , because this is also a fairly common fault (ignore sonalikagaur shouting ''just put it in bootloader'', he obviously doesn't know that there are loads of faults that include not being able to get into bootloader)
Problem is, in both of those situations, there is very little you can do, so ill point a few things to read up on for the different faults.
For case 1, there isn't anything you can do except JTAG it.
For 2, from the various pieces, no bootloader, flash failing at 50% (are you sure it didn't stop at 8% - 10%?), I think it points to a hardware fault, in which case you can possibly try the freezer trick, and there are some threads that talk about not being able to get into bootloader using voldown and power, perhaps they would be worth reading.
however i suspect its deeper than that. If all else fails, there's a thread that talks about heating the mainboard to help the solder joints from the processor to the mainboard reattach, but that's pretty full on stuff, and only to be tried if you don't mind a truly dead phone.
Again, a JTAG may fix it, but then it may not too, and unless you find someone local with teh equipment, its as expensive as a new hd2.
You can sell them for parts for a reasonable amount. Especially the screens.
Good luck.
So samsamual, if its as dead as a doornail, a person shd head straight for a jtag? My boet had 1 which inspired me, and 2years later i managed to get 1, only to enjoy for about a week before i asked my brother to droid mine like he had done his back then. I dnt knw what he was thinking but, number 1 he didnt use winmo device centre, i didnt actually pay attention to what n how he tried flashing, but within the hour i then had myself a rather lovely ornamental piece, yeah, a totally dead bricked HD2, even just laying there deadly n all, i have to say 'what a beautiful phone!' Really, i was heartbroken nonetheless... anyway without a decent telephonic device, my boet had a s2 galaxy and bb 9500 storm which i claimed before he left. A few days later i browsed web for swaps, and amazingly i found a fellow looking for two bbs for an brand new s3, his reasoning that the i9300 is a data pig, it is depending how you set it up. Anyway, two days ago i got me another hd2, bt it also has a frickin problem, it wnt pick up a signal, no service, although yesterday i used whole day on cell c network here in cpt sa, when i changed for a fresh battery (still have my dead spare brick, hence extra battery), then it wdnt pick up a sgnal again, i changed once using my daughters sim, which is the same network, just a newer sim card. It is the same size as the micro sim as far as copper plates on a sim are concerned that i can tell when comparing to my micro sim in my galaxy, my hd2 sim cards' copper plating wd hide my daughters same sized sim card completely. So my q is if her card worked with less plated sim, shd i maybe upgrade my sim card, but... i had a virgin sim in it aswell, worked fine, bt then i wanted my old sim id used the whole day, back in phone, and since yesterday evening up till writing this now this am, i havent bn able to get a signal except when i checked my daugters sim, it worked, took it out, pt mine back, wdnt pick up service, put my kids 1 in again and then it also wdnt pick up again, till nw... nothing? Nw im only sumising but my next q is cd there maybe be damage to the pins that make contact from the phone to the sim? Or cd the phone possibly be blocked And is there gna be a way to check the sim pins without having to disassemble the whole phone. Its nt a major issue though, i cn still connect to the internet via wireless net and do my whatevers there with regard to that, for me its a great phone for anyone into the pc trade, eg, remote desktop pc control, etc etc. So ok, nw... is there a place i cn go to discover jtagn my dead hd2, id like more info, so id probly find in the hd2 forum on xda. I also nd to ask what rom wd i flash if im in south africa, because i knw tmous for us only. And im using cell c in sa, but it gives a long list of operators i cn chose frm if i want, theres even 4 for my country that i cn chose from. Bt cd be many reasons aswel like you sd, i wdnt mind getn other hd2 up n running, and ptn android on both, wel hope I get the 1 andy gn. Iv sum reading to do for this forum. The previous owner of my second hd2 had android on, so then does that mean the phone is rooted already? If it had android on it shd be hey. Leme go read sum, chat later maybe.
Sent from my GT-I9300 using xda app-developers app
i had a virgin sim in it aswell, worked fine, bt then i wanted my old sim id used the whole day, back in phone, and since yesterday evening up till writing this now this am, i havent bn able to get a signal except when i checked my daugters sim, it worked, took it out, pt mine back, wdnt pick up service,
Click to expand...
Click to collapse
definitely get a new sim, back in 2009 a fair number of epople had to get new sims for the dh2.
HTC-HD2
Hello guys
I have a problem when recording a new official rom everything went well, but after the "Finish", I reset the phone but it does not start and now not even turn on what is probably wrong. It is not at all or in the bootloader no nothing just vibration and Tod everything
is dead?
---------- Post added at 06:53 PM ---------- Previous post was at 06:16 PM ----------
Hello guys
I have a problem when recording a new official rom everything went well, but after the "Finish", I reset the phone but it does not start and now not even turn on what is probably wrong. It is not at all or in the bootloader no nothing just vibration and Tod everything
is dead?
---------- Post added at 07:50 PM ---------- Previous post was at 06:53 PM ----------
Hello guys
I have a problem when recording a new official rom everything went well, but after the "Finish", I reset the phone but it does not start and now not even turn on what is probably wrong. It is not at all or in the bootloader no nothing just vibration and Tod everything
is dead?