I have a geniune HTC hands free kit for my spv m1000 / XDA2 (branded T-mobile, bought over the net from germany) and am looking to replace the holster with one for a SPV m3100/Tytn. According to HTC's site the hands free kit holsters are supposed to be available as a seperate part but I can't track one down. HTC dont respond to emails... anyone help?
HTC looks stereo pin looks like Nokia hands free.. but there is a defect in manufacturing for HTC that it acts like mono to most of the standard stereo pins.
youcan correct this defect in HTC by adding a paper ring to the Nokia stero pin.
I had see this to work on my HTC 8125 from US- which i would plan to sell it out as i am not happy because of the speker phone and vocie clarity is horrible.
Thanks,
Taj
Related
I lost my pen already after a week lol.. when any of these MDA III and pro pen on ebay fit in my US Tmobile MDA?
MDA what?
If you have an MDA Vario (HTC Wizard), then you will need an actual HTC Wizard stylus, as others typically will not fit.
You can get them from, among other, expansys
ZeBoxx said:
MDA what?
If you have an MDA Vario (HTC Wizard), then you will need an actual HTC Wizard stylus, as others typically will not fit.
You can get them from, among other, expansys
Click to expand...
Click to collapse
For what it's worth, in the US, T-mobile just calls the HTC Wizard the 'MDA'. I can see where this would be confusing.
http://www.t-mobile.com/shop/Phones/Detail.aspx?device=8802ddeb-1ee4-477a-9608-d9cd1e2a903f
Pocket PC Techs sells a stylus/pen for this device.
Stylus
The site:
www.extremepda.com
also sells the MDA stylus.
Stylus with pen
I was hoping to find through this thread a source for a Wizard/K-JAM stylus that has a pen in it.
PPCtechs is a combo stylus/reset pin.
Extreme - cannot find anything on their site at all.
Because of it being this funny stubby collapsing stylus, I can see that it will be a bit more of a challenge for the gizmo makers.
I have received so much from this forum that I decided to give my pinch of salt. Is not much, but I think it will be good to others like me.
I was looking for a case for my brand new 8125. It have to be light, compact, without a belt clip and give some protection to scratches and minor bumps. It will be used to protect the 8125 inside my jean's front pockets. I found that the silicon skin was the closest to my needs, so I got one from Ebay.
When I installed it I knew that it was perfect for me , but no access to the keyboard really started to bother me after 5 minutes. So, I took it to my work table and made a cut along the left side of the skin case and two small cuts down the edges of the case. That created a flap that allowed me slide the keyboard without taking the 8125 out of the case.
The mod took me 2 minutes to do, but 30 minutes to take the corage to cut my new case. Now my case is perfect. After 2 weeks of usage the only problem that I have is that the vol control is harder to use because the flap some times gets on the way. Not that big problem anyway.
Here are some pics. Hope that this help someone.
Diego
Here is the case with the keyboard open.
One from the back
I don't know what that thing is, but an HTC Wizard it is not
i believe its a great idea....I like my boxwave skins for my treos.
Oh and I believe he said its an 8125 several times!
i believe its a great idea....I like my boxwave skins for my treos.
Oh and I believe he said its an 8125 several times!
@Equilon
It's a Cingular 8125, but I think it will work on any silicon skin case for the Wizard.
Diego
which one is it on boxwave.com
I want to get a silicone case from boxwave.com for the T-Mobile MDA, but not sure which one it is on the site. Does anyone know which one it is?
T-Mobile MDA Compact?
T-Mobile MDA II?
T-Mobile MDA III?
T-Mobile MDA IV?
T-Mobile MDA Pro?
kamusta1 said:
I want to get a silicone case from boxwave.com for the T-Mobile MDA, but not sure which one it is on the site. Does anyone know which one it is?
T-Mobile MDA Compact?
T-Mobile MDA II?
T-Mobile MDA III?
T-Mobile MDA IV?
T-Mobile MDA Pro?
Click to expand...
Click to collapse
there is no silison case for the WIZA200, they just have one for the WIZA100 (Cingular) version...
Will this cingular case be good for my T-Mobile MDA?
Hello fellow Diamond-Lovers!
I just ordered my MDA Compact V, and the dude from T-Mobile mentioned that there will no pouch included in the package. Well that sucks, but we need to carry on right? For my MDA Compact IV (HTC Diamond) I had the HTC PO S390 pouch:
View attachment 180874
Does anybody know if there is a version like that suitable for the new Diamond? I like the style of that pouch very much, it is unfortunately too small for the new baby.....
Studebaker
What they need is simple, classy pouch with a side cut, like the one that comes standard with the Nokia E71.
See previous thread....
http://forum.xda-developers.com/showthread.php?t=506785
Hello fellow Diamond-Lovers!
I just received my MDA Compact V, and guess what? It came with a pouch similar to the HTC PO S390 pouch. Difference is the size of course, and it has no HTC logo on it.
Cheers, Studebaker
Please delete, double post.
Rubber / Silicone Case for MDA Compact V
Hi
Have had my mda compact v for a few weeks now and have been having terrible trouble finding a rubber/silicone case to protect my phone. There are lots for the 'proper' htc touch diamond2 but almost none for the mda compact v. I know they supposedly have the same dimensions but they are shaped differently. Does anybody know where I can get one in UK/Europe - anywhere really? Have tried using the US name htc pure and found some garish coloured ones in US that cost vast amounts to send to Europe.
Any help much appreciated.
Studebaker72 said:
Hello fellow Diamond-Lovers!
I just received my MDA Compact V, and guess what? It came with a pouch similar to the HTC PO S390 pouch. Difference is the size of course, and it has no HTC logo on it.
Cheers, Studebaker
Click to expand...
Click to collapse
Hi,
Mine came with one of these too but they are of not great quality. The leather at the end splits over time.
I replaced mine with a D2 leather case of eBay.
Hi, this weekend i got my t-mobile version of the Diamond2, named as the Compact V. The design is different from the Diamond2, unlike my previous phone (Compact IV, t-mobile version of the diamond) the design is in my opinion worse than the original... It's all black, no metal finishes and gives a more plastic feeling. The most annoying part is that they placed a little removable cover at the bottom where the mini-usb port is placed. You always have to remove the cover to connect an cable.
This will give problems using a car cit; it won't be possible to slide it in becouse you first have to open the cover, after that it will be in the way...
At the sides of the usb port you can look 'inside' the phone, it's not closed at the sides so i find it tricky to remove the cover as all kind of dirt and dust can get inside the phone...
Does anybody have an solution for this? I looked at ebay for replacement housing but that only will cost me about €50, and i'm not sure if all the buttons will fit exactly...
Interesting! Searching for a Car Kit too (and some solution for the USB-Cover)..
BTW. this cover also makes it nearly impossible to use my stylish HTC-desktop-cradle..
This Design wasn't the best idea from T-Mobile^^
i just sent t-mobile a question about this issue. They chose a strange solution in my opinion. The compact IV looked a lot better than the original, and now they come up with this plastic cheaper looking phone, with holes at the side of the usb port... strange design.
Your're right dude! You speak out what I think^^
ok, now that's two of us... I'll await the reaction from T-mobile
Hey Hellboy.
What do you think, could this fit for our devices too?
I bought a car cradle designed for the Diamond1 for my MDA Compact IV and had to modify it a bit to fit my device... Do u think this would be necessary here too?
It's not what i'm searching for, i can buy an universal car holder everywhere... The active car kit i bought from Adapt for my mda compact IV worked perfect; voice and navigation commands come over the speaker and the phone is charged while in the holder. The same kit exists for the diamond2, but with the compact V we have the bloody cap...
http://www.adapt-mobile.com/mobile/detail.php?p_id=504
The one I posted is for Diamond2 only, not a universal kit.
Think I will try one for Diamond2 and test it for my MDA c V^^
[edit] I've bought this one.
Got the same for my MDA c IV and was very satisfied!
looks good, but still lacks the possibility i seek; hands free car kit and charging. Just slide the phone in an you're done. The one i posted has all these options, and worked fine on my compact IV...
Hey Hellboy,
did TMob ever answer your question?
Just curious... as I am also struggling to find a matching mount for my CV.
thx
Nope,
Never had any reaction... Great service!
hello,
just need some opinions about car holders. first one CU S240 holder for topaz
http://www.handy-heaven.de/shop/images/b178412.jpg and second one is universal htc holder CU G100 http://www.1a-handyshop.de/images/artikel/HTC-CU-G100.jpg
which one prefer you guys? im still hesitating.
I wouldn't go for either. Brodit are the best. There is no fiddling with plugs with that, you just slide it in and it is charging....
Alternatively see here: http://forum.xda-developers.com/showthread.php?t=564493
i bought one like the one in first link with charger for about 10$ on ebay,
the handle (long part) broke immediately, so luckily the plastic that holds the phone itself is disconnectable and fits HR and i had HR handle from my old phone so the combination works but for itself its piece of crap.
too bad HR dont make holder for topaz - simple & rock solid - mine works for 2 years now with several phones.
about the universal ones i tried couple and its never perfect...
Look at brodit. Costly but the best available. The one for Diamond can be sued for Diamond 2
I just purchased this (spendy $59) one from ProClip...
http://www.proclipusa.com/brodit-device-holder/htc-touch-diamond-2-(gsm)/charging-holder-with-tilt-swivel-and-cigarette-lighter-adapter-512011-17511.aspx
It's on backorder now, but should be here within a week. I'll let you know how I like it.
[edit: It's by Brodit... didn't realize that.]
I was thinking of going for the CS240 as well, some site have it around £20
http://www.mobilefun.co.uk/htc-touch-diamond2-car-upgrade-kit-cu-s240-p18997.htm
Most HTC originals I have bought are great quality.
That said I also spotted these Herbert Richter, any tried them ?
http://www.handtec.co.uk/product.php/2417/herbert-richter-htc-touch-diamond-2-jacket-grip
I like the idea of multiple attachements, for the bike, car, etc...
Anyone bought and tried either of these, the Brodkit ones looks too bulky and over priced (to me).
The CS240 is great quality. It is actually made by Herbert Richter in Germany and the jacket grip of the second link you supplied is part of the CS240 set. So I think the set is the best bargain. It has a very good build quality. Nothing waggles during driving.
There is one drawback. The jacket grip may scratch the shiny surface of the battery cover, but if the TD2 is used without a case its probably scratched anyway.
I bought something that looks like your second link. And let me tell you, that was the cheapest piece of Chinese crap I have ever bought. The sides the open and close to grip the phone were getting jammed, the became loose and phone would fall. In two month it had been broken.
Nomas mis dos centabos.
I just bought this one
link not allowed
waiting for it to arrive ......
as new user not allowed yet to provide links
try the web for dealextreme dot com and look for sku 23237
Have you thought about the parrot branded car kits.
The blue tooth works really well and I have had for a long time and it never let me down.
I got mine from cleverkit.com