Hello xda-users....
I've got a little problem with my xda using tomtom.
I've added the GPS part (V209) of Tomtom diretly to the Rom.
I'm using a WM2003 ROM.
I had opened GPS an got the error "COM1 does not exist".
So exiting GPS and disabled infrared.
Opened GPS and the problem still exists.
I did not get it working. Tried some Soft and Hardresets.
May this be a problem because:
a) GPS is in the ROM
b) No other TomTom Software installed
c) Only the files from V209 are used
d) No Activation of TomTom has done (Don't know how to activate GPS...)
e) ???????
Anyone could help me?
Stefan
Hmmm, turning off the infrared port worked fine for me. Is it an actual TomTom GPS receiver or a third party? Have you set the NMEA/Sirf parameters to match the module?
Moonstar said:
Hmmm, turning off the infrared port worked fine for me. Is it an actual TomTom GPS receiver or a third party? Have you set the NMEA/Sirf parameters to match the module?
Click to expand...
Click to collapse
It's a third party GPS Reciever (Haicom)
It already worked.....
The Problem is, that i couldn't set the settings to Serial cable atteched to COM 1.
I got the error:
Cannot open Com1:
Port does not exist
:?
Turning infrared off, worked for me in the other cases too.....
Stefan
Comm 9
Hi LumpiStefan
I had the same problem when I had the XDA, change the comm setting to Comm 9.
I was also using the Hiacom HI-203e. and this worked for me...
Hope it helps.
Sno...
do you suffer with disappearing check boxes?
i fixed mine after flashin rom 4.01.00 by the following
install navigator and voice prompts but not gps
upgraded to navigator 2.24
then installed gps 2.09
no checkbox problems or com1 errors.
Got another hint to disable folderable keyboard. Will test all given solutions today.....
Hope one will work.
Thx to all
Stefan
The folding keyboard driver will also snatch com1 for its own use.
Ok. Problem solved.
Com9 didn´t work for me. Problam was the Keyboard-driver...
Stefan
Because of all the expected mssing around with my original T-Mobile 1.60.00 ROM combined with a Bluetooth GPS, I decided to upgrade. It all works now, just let me share my findings with you:
I wanted the 1.72WWE and 1.14 Radio ROM, no Beta, but also wanted to keep my Dutch T-Mobile custumisations.
I took the recently released QTek 1.72 ROM
Unpacked it
Threw the extende rom file away
Changed the 'country code' from qtek to tmobile (see link on xda-developers mainpage)
Backed up my device using Activesync backup
Started the upgrade
UhOh: 'USB 1.03' on screen and nothing happening
Restarted upgrade
Went smooth all along
Hard reset: YES!! 1.72.00WWE / 1.14.00 radio with all my beloved Dutch T-Mobile customisations (ext rom 1.60.38)
Performed restore. THIS probably wasnt the smartest idea, because right after that my device was quite unstable. '
So: Did a 'permanent save' backup
and a Hard reset again.
Rock steady since then!
To get Bluetooth & BT GPS working frightened me a bit: getting that to work should be proof of the pudding to justify my upgrade.
Fiddled around 2 hours (com ports, gps viewer software that accompanied the GPS and what have you got . . .), until I tried the simple stupid method:
Switch on Bluetooth
Bond the BPS
Start TomTom GPS
Select NMEA 0183v2 9600 and Bluetooth GPS
I am very happy!!
For those that are still lokking for a decent cheap BT GPS: Search on ebay for DCONNEX. They sell for around 80 euros + 28 euros shipping. The DCONNEX DC-230 is in fact a rebadged Holux GR-230. Works like a charm, and for the price of a wire solution!
Works!!!!!
even imat v1.72 works great with BT GPS with no added BT tools
gazzaman2k said:
even imat v1.72 works great with BT GPS with no added BT tools
Click to expand...
Click to collapse
Is the same ROM.
Eelco is right
As long as you look just at the os & radio roms both QTek 1.72 and IMate 1.72 are the same.
Difference is withing the extended rom.
because I liked to keep the Duthc T-Mobile customisations (well not all, but most of them) I re-used my old extended rom.
Hello,
Help with 1.72 ROM set up.
I'm very excited about how you have set up your device, but I'm not fully certain how to do the same.
I have looked for the ROM unpacker, but the only thing I see on this site is the ER-Edit.
I currently have the T-Mobile UK Beta 1.72 on my device, and I'm not real happy with it.
If you can and if it is not too much trouble, could you please provide me a little more specific directions on how you accomplished your set up. I'm in the USA, and I upgraded from 1.60.36, which I was not very happy with either. I liked 1.60 better.
My major concerns lie with the country id error, and using parts of different extended roms and radio stacks, but I'm willing to try.
Thank You, Ed
Well since you now have 1.72 on the device its really quite simple.
(You might as well consider upgrading to the non-beta 1.72 from imate or Qtek, i used Qtek)
Foor the external rom customisations:
Unpack an update (like the 1.60 you mentioned) using winrar
Using the directions on thsi site determine your current çountry id FOR THE EXTENDED ROM
using the directions on this site (xda2nbf) change the country id for the extende rom file (ms_.nbf)
remove the other .nbf (nb and radio) files
Upgrade your device
Cold reset
Yopur device should now be a bit in the right direction
Install the extende rom-unlocker found in this forum
unhide & unlock the extended rom
Now you can add/remove programs from the extended rom.
adding goes like:
1. place .cab file of program to be installed in extended rom
2. add CAB line in config.txt just before the current last line
removing goes like:
1. remove cab file of program you dont like
2. remove accompanying line in config.txt
Dont forget to lock you extended rom afterwards so the contents is kept during any reset.
hope this helps.
also : search the forum on the topics extended rom unlock
edsub,
Thank you very much. Your response is very helpful, and sends me in the right direction. The winrar was the missing peice that I did not have.
I'm familiar with the extended rom part, but I have not played around with the .nbf, nor the rom locking.
The UK beta 1.72 I have does not seem real stable to me. I'm thinking of going with the iMate or Qtek 1.72, as you suggest.
Thanks again I'll see what I can manage.
Ed
hey all, im on o2 in uk, my current settings are :-
Rom version :- 1.60.00WWE
Rom date :- 12/03/03
Radio version :- 1.10.00
Protocol version :- 1337.18
ExtRom version :- 1.60.50
i knw this mite sound abit basic...but what difference would it make in me updating to this 1.72 rom ?
is there any point ?
edsub said:
i used Qtek
Click to expand...
Click to collapse
Maybe off topic but where did you get the QTEK ROM from?
Can you share the URL.
Thanks,
Mark
Hi all,
I've recently bought a DC-230 GPS BT, but I cannot use with TomTom3
I have:
ROM VER 1.72.00WWE
Radio 1.14.00
Ext 1.72.104 (with some cabs added by me)
And a XDA 2 (rom is a Qtek 2020)
I've tried:
Hard reset - no BT Tools - Bond GPS - Success with GPS Viewer (that is in boundle with DC) on COM5 9600
Started tomtomGPS, no success (with or without START GPS with GPS Viewer).
I've tried
- NMEA 0183v2 9600 on COM5 and on Bluetooth
- NMEA 0183v2 Bluetooth on COM5 and on Bluetooth
- SiRF 9600 on COM5 and on Bluetooth
- SiRF Bluetooth on COM5 and on Bluetooth
I've removed bond with GPS.
So i've installed BT Tools 1.1. Bondend and added profile on COM7
GPS View didn't see the GPS
TomTom the same (i've tried the same drivers)
Any suggestion?
Thanks
Fabio
try changing to nmea 4800 on the same port that the gps view is showing, make sure gps view is closed when starting tomtom. Alsi instead of choosing from the upper drop down box in tomtom, look in the lower drop down, you may find your gps is announced/listed there.
cruisin-thru said:
try changing to nmea 4800 on the same port that the gps view is showing, make sure gps view is closed when starting tomtom. Alsi instead of choosing from the upper drop down box in tomtom, look in the lower drop down, you may find your gps is announced/listed there.
Click to expand...
Click to collapse
no success
I don't know why doesn't work
GPS View found my GPS... TomTom GPS no
Is the right version of TomTom GPS? (down right i see V2.09 305/393)
In the lower drop down box I see only com/irda/bt ports...
Thanks
You should have totmtomgps V3.02. It is available on their site.
Downloaded TomTom GPS 3.02...no success
But is correct that GPS Viewer when i push on Start GPS show
Date: 2002/11/10
Time 01:01:xx
Long:
E: 0'0'0.0''
Lat
N: 0'0'0.0''
Dop: 50.0
Aciring: no fix
Direction NE 0
Alt 0m
Speed 0km/h
PDop50.0
And i get a red point on the N on the map...
news...
With BT Tools installed i've tried GPSDash and MapSonic...
They connect to com7, but I get Satellites in use: 0 of 1 sats
Quality of Fix: no fix / n.a.
What's meaning?
Thanks again
I cannot use any sats..whats wrong ? is the gps broken ?
Aehm....uhm...
Er...is possible that it is low of battery? I put on charge and now I see 7 sats..
Bluetooth authomatic activation problem
I am sorry to jump in this discussion, but I had a BT problem, I couldn't connect to a GPS (Leadtek), and I did almost the same thing you are talking: I upgraded my QTEK2020 to 1.72.00WWE/1.14.00/1.72.602.
After the upgrade I installed the Pocket Bluetooth Tools and after some bondings/"unbonding", the COM7 profile appeared and everything worked fine from that moment on.
Now, there are 2 things I want to share:
- first, in order to have a diferent Bluetooth serial connection to the same or another port, I had to kill the the bond I created with the Leadtek GPS, then bonded again without activating the serial profile and then killed that bond again. Only after this series of actions, with a soft reset between all of them, I was able to bond with a diferent GPS bluetooth (I think it was from Globalsat), using the Com7 serial profile.
- second: my Qtek activates randomly the bluetooth by itself...
Does anyone know how to solve the authomatic random activation of the GT?
Try to activate in start/settings/system/bluetooth settings the extended port com 5. This helps with leadtek and emtac bluetooth antenna's for tomtom, and alturion.
Cheers
Why are you using Pocket Bluetools with rom 1.72??
NO NEED TO!!
Just use native MS BT Stack.
Bond the BT GPS, say yes when asked to assign COM port.
Let GPS software use COM5
Settings for TomTom3: NMEA Bluetooth GPS / COM5
Works flawlessly
Finally I upgraded to WM2003SE (2.06).
Direct reason was the declining performance under WM2003 (1.72). What happened was that when running TomTom 5.1 and a phone call came in (or I made one) the connection with my SD was lost. Exit TomTom, take-out & re-insert SD end eventualy restarting TomTom solved that on an incident basis.
With WM2003 SE that problem has gone. BUT I got something back: The sound in TomTom (5.1 and 5.21) is severely distorted ('clicking' like sound). The same (but not that severe) happens when I run Tomtom and I play an MP3 using WMP9.
I tried XCPUScalar, but the CPU load most of the time is around 60-70% (@400MHZ).
My Extended ROM does not have suspicious tools that run permanently in it.
Any clues?
Update: Same issue happens with ROM 2.20.07CHS (translated).
I received a clue from mamaich :
Create a "Priority256" key under HKLM\drivers\builtin\wavedev and set it to 128 (0x80)
First results are promising!
mmm looks like I am talking to myself in this thread.
Anyway: The registry hack worked fine for me. Even better: the GB-Tweak applet I allready have does just the same (via the Audio priority option).
I am now very happy with the 2.20 translated SE ROM for my Himalaya. I might just keep on using it until my Wizard arives in two weeks 8)
Had the same problem, tomtom stutterd, GB-Tweak did the trick.
Thanks for the help.
Andy
hi everyone.
sorted a mate with tom tom 7 on his charmer with newest wm5 official (o2). program works fine, but the problem is linking with his copilot gps bt module.
it all works well until the GPS MODULE is turned off, like you would overnight.
when turned back on, the pda asks if you want to connect. saying yes prompts for the passcode for gps module, but now have to re-do all settings on pda and tom tom, before it will work.
i tried it with my hermes running wm6.1 pro, and i dont have a problem.
any ideas?
Install WM 6.1 on Charmer. (Maybe this works cause you said it works on Hermes.)
i will as a last resort. i was just wondering if anyone else had come across this problem before
Found way around the problem. Tried a different GPS unit, works brilliantly.
not fixed the problem, but good enough
I've connected bluetooth GPS to 3125, seemed to be OK (it asked about pin and after that info about equipment beeing connected).
Unfortunatelly GPS software doesn't communicate with GPS equipment. It is searching for bluetooth GPS but doesn't find it. I tried to set connection (port, baud rate) manually but I don't know which COM port is assigned to bluetooth
Is there any way to check this on ?
P.S. I've installed WM6.1 standard by Erofich
try 6.1 pro
I found that bluetooth is using COM6.
The biggest problem was in finding properly working GPS software
hi bchrubas,
Which GPS software are you actually using on WM6.1 standard?
I tried WM6.1 pro for a while but found WM6.1 standard more handsome since I manly want to use my phone simply as a phone
Anyway I'm still missing a good GPS program for navigation which is not intended for touch screen devices.
For now I stucked with Sygic McGuider (http://www.sygic.com/)
It doesn't need touch screen and StarTrek (or At&T 3125) is on the list of compatibile devices. MCGuider runs on STK quite fairly, I didn't noticed any major errors, maybe if it was little faster? (I know that it is possible to overclock this phone but i'm not quite sure about it
Anyhow, I'm stiil searching for some simple GPS track loging software
I looked around a bit and on smartphone-freeware.com I found these two programs:
gpsVP
chtiGPS
both seem to be able to do the loging. And the first one might even be worth trying as a navigation software for me.
not bad, especially this gpsVP
if it really support Garmin format maps it could be very useful