Related
Earlier, I installed unofficial T-Mobile 1.6 rom on my i-mate. I just recenlty tried installing the official i-mate update and there is a country code. I don't have the old rom to revert to. Can anyone help. I know I would have to at the least get a copy of the old rom and then install it into the i-mate. Again, since I don't have a backup of the old one, I would need info on how to get one first.
The T-Mobile unofficial one works fine. I just wanted to go back to always on gprs etc. that the i-mate update has. If not, I guess I will have to wait until the rom kitchen is up and running for this unit. :lol:
Re: Official i-mate rom won't install after installing t-mob
jonburge said:
Earlier, I installed unofficial T-Mobile 1.6 rom on my i-mate. I just recenlty tried installing the official i-mate update and there is a country code. I don't have the old rom to revert to. Can anyone help. I know I would have to at the least get a copy of the old rom and then install it into the i-mate. Again, since I don't have a backup of the old one, I would need info on how to get one first.
The T-Mobile unofficial one works fine. I just wanted to go back to always on gprs etc. that the i-mate update has. If not, I guess I will have to wait until the rom kitchen is up and running for this unit. :lol:
Click to expand...
Click to collapse
I think you better try it using bootloader way, because t-mobile protect it's update, it happen in XDAI if you update your XDA to 4.16 and you want to go back to 4.11 then you have to update it using bootloader to be able to go back from the previous one 4.11 8) hope this help you...opps correction please there is no bootloader on XDA II, there is bootloader but in different way, I think if you copy your old nbf to sd using xdatools and go to bootloader by using power+anydirection+ reset it will ask to download the nbf to you device... hmmm if this doesn't work you have to look for another way.
T-Mobile 1.60 BUGGY Rom - Want to go back to iMate ROM
Folks,
I'm in the same position - Can someone please outline the success they've had going back from the T-Mobile 1.60 ROM to Imate ROM 1.5283??
Any thoughts would be great... (I'm guessing the boot loader using an SD card may work but would love to hear of any new tricks that people have learned on this
Cheers
Andy
I'll try to help.
Where can the ROM be downloaded, so I can have a look at it.
Jos
T-Mobile Back to iMate ROM
Thanks
I've uploaded the new iMate ROM image to:
http://www.c1au.com/iMatePDAROMS/ruu15283.zip
The somewhat flakey T-Mobile 1.6.006 ROM (which I'm trying to get away from is at
http://www.c1au.com/iMatePDAROMS/TMobile160.zip
Of course, with the different operator / country codes, it's not just a matter of running the .EXE - It'll need to involve the boot loader of a little hex editing of the header, I'm guessing (just guessing?!)
The new iMate ROM is meant to be the best bet around at the moment and my device is an iMate in the first place. The only reason why I installed the T-Mobile one was to get the Bluetooth GPS fix (which works well) - BUT so many other things aren't as stable!!
The new iMate ROM is meant to have the BT GPS fix as well.
Any help, much appreciated!
Cheers
Andy
Re: T-Mobile Back to iMate ROM
acurtis007 said:
Thanks
Of course, with the different operator / country codes, it's not just a matter of running the .EXE - It'll need to involve the boot loader of a little hex editing of the header, I'm guessing (just guessing?!)
Click to expand...
Click to collapse
That's correct, you need to mod it.
I'll make a procedure for it.
Jos
THANKS!
You're a champion!
Thanks very much..
It sounds like there's a few people that'll thank you!
The other posts on the subject aren't too clear at this point - So it'll be great to clear up the issue for the iMate / XDA II.
All the best - Have a great weekend.
Andy
OK, made some time to create a batch file to upgrade.
Works only for upgrade from T-Mobile 1.60.06 NL to I-mate 1.53.82.
1. Download the ROM image ruu15283.zip from the site in this posting
2. Unzip the file with Winzip
3. You now get a file called ruu15283wwwe_cdl.exe
3. Extract this file with Winzip to a new folder
4. Extract the attached file to the same folder
5. Start the conversion and upgrade by double-clicking convert.bat
Since I'm out till Sunday, I can't check my mail to respond to problems.
Enjoy!
Can the first person brave enough to try this please confirm success.
IT WORKS!!
Jes - You're a scholar and a gentleman!!
And a *(&(&( good programmer
IT WORKED!
Thanks a million!
Let me know how to send you virtual beers or whatever
(or if you need a hand with anything - Please let me know!)
Cheers
Andy
Nah, I'm not a good programmer, I just know how to write bachfiles and how to combine things to get the disered result.
Thanks has to go to Isme. He knows a lot about the internal working of the XDA II, the ROMS and the bootloader process.
He wrote the great tool used to change the file headers, so you can update your machine with a ROM of a different brand.
He's a good programmer!
If somebody needs a mod to upgrade from another ROM version, please let me know.
And if you want to do something back, please donate to the people who keep this nice forum up and running.
It worked. For those who want to get back onto the official path from unofficial t-mobile this is an automated way to do it. Thanks...Jon
Backing Up XDA2 ROM+CE
I'm a new XDA2 iMate user, want to back up my ROM+CE before I screw things up. I did this on my XDA1 (power + software reset, then press contact button I think). Anyway, I always had my ROM+CE backed up to a 64M SD card ... just in case.
I've searched these forums for such a procedure for XDA2 ... no luck.
What is the process, if any, to backup the XDA2's ROM+CE image to SD card?
Appreciate any help,
Craig
I think it's possible with the xda2dmp tool, but you better ask Itsme, he wrote it.
You can find it on this site: http://www.xs4all.nl/~itsme/projects/xda/xda-ii.html
PHoto contacts wont work
I have an imate and i just upgraded it with the new rom, but now i have a problem that the photo contacts wont work... Is there a way i can downgrade to an older version of rom. I use to rely alot on the photo contacts.. anyone else have the same problem?? thank you
Installing i-mate ROM after T-Mobile's
Gentlemen ,
I did the same (install T-mobile ROM on an imate ) and I want to install the imate ROM update. I am not sure about the T-mobile ROM , but when I boot it displays the following :
R 1.06.01
G 1337.16
D 1.60.00WWE
Kindly advsie if the above mentioned patch work in my case .
Appreciate you kind advice !
Thanks!
Should work.
Just try it out. If it's not ok, you get country error when you try to upgrade.
Jos
Hi Jos ,
I tried it and it WORKS!!!!!!!!!! You are a brilliant guy !!!
I owe you one!!
My friend wants to install the T-Mobile Update because the windows CE version on the T-mobile ROM is newer than that of the imate. Any magic patches that can be done.
Note -> Please tell me of how can I be of any help to you in return for your support
All the best
If you want to do something back, please donate to this forum to keep it up and running without advertisements or banners (just click Donate Money on top of this page).
This is how to upgrade:
Works only for upgrade from i-mate to T-Mobile 1.60.06 NL.
1. Download the T-Mobile ROM image from http://www.xda-developers.com/incoming/rom160wwe/
2. Extract this file with Winzip to a new folder
3. Extract the attached file to the same folder
4. Start the conversion and upgrade by double-clicking convert.bat
Let me know if it works.
Grtz,
Jos
Difference between i-mate 1.52.00WWE ROM and i-mate 1.53.82
Can anybody outline the differences between the 1.52.00 and the 1.53.82 official i-mate ROMs?
I'm trying to ascertain whether I have sufficient incentive to upgrade (given the "If it ain't broke, don't fix it" mentality I subscribe to in my old age!).
Sufficient incentive might be;
:arrow: Faster GPRS
:arrow: Improved battery life
:arrow: Improved all-round performance.
Thanks guys.
Codenix
Just upgraded to i-mate from much-loved XDA!
OMG!!! T-Mobile have released Official WM6 ROMS UK NE DE AT!!!
Thread
There are a lot of people who keep asking for T-Mobile ROMs I was one of them. So this morning after someone else asking I have decided to post this in the hope it can be referred to!
CURRENTLY AVAILABLE DUMPED T-Mobile ROMs
UK ROM
UK ROM - With CustomRUU v4.3 felt kind so updated it for you all!
UK ROM - Windows Mobile 6 Test 3.60 - Radio 1.50
DUTCH ROM
CROATIAN ROM
GERMAN ROM
Edit from Sleuth255: We are not allowed to host ROMs here. Please post to rapidshare or some other site then link. I must remove these ROMs from our FTP due to an edict from m$ legal. Sorry
The UK one appears to have been built however I have not tested it, if someone has used it in the past please let me know.
I have not checked any of the others, if people have used them and they are built please contact me and I shall update this accordingly.
Please can someone update the Wiki for the UK ROM, thanks.
CURRENTLY AVAILABLE SHIPPED T-Mobile ROMs
HUNGARIAN
GERMAN
SHIPPED ROMS HERE
If there are anymore T-Mobile Shipped ROMS I have not mentioned please msg me and I will update accordingly.
Any chance of this thread being sticked?
Thanks, I think this is very helpfull.
Great! Always usefull when you need to restore your device
Has anyone tested if any of these ROMs flash properly.. for me it would be the Dutchversion then... But I can not test right now can not have my phone broken down. Once Kaizer is out I am going to buy that one and then I could test, but would be nice to know if these dumped ROMs work
Unfortunately I do not know, I haven't even tested the UK version as I am not sure if it will work, however I did update the RUU.
Shame we cannot emulate the firmware install!
The T-Mob UK dumped ROM isn't quite right - the w'n'w home page doesn't work properly.
Minor thing but, one of the first things I tested
I dumped my friends ROM the other day. I'm currently working on building it and testing it - will let you know when it's done
Cheers,
Smiffy.
Hmmm...humble pie - lovely
Well, after flashing the ROM i dumped the other day, I had exactly the same thing with IE.
It took me about 3 seconds to realise it must be because the extROM had been flashed by one of the WM6 ROMs I had been using in the past.
As it turns out, this is the case so I can confirm that if you have the same issue, download the extROM dumo from the wiki (from this page) and delete the current contents of your extROM and copy the downloaded one back to it. Hard reset, and voila - everything back the way T-Mobile shipped (apart from Radio ROM, IPL\SPL etc...) but WTH ;-)
Smiffy.
Lordsmiff said:
As it turns out, this is the case so I can confirm that if you have the same issue, download the extROM dumo from the wiki (from this page) and delete the current contents of your extROM and copy the downloaded one back to it. Hard reset, and voila - everything back the way T-Mobile shipped (apart from Radio ROM, IPL\SPL etc...) but WTH ;-)
Click to expand...
Click to collapse
How can I do that?
trapper said:
How can I do that?
Click to expand...
Click to collapse
Trapper,
I assume you mean how can you put the correct Extended ROM onto your device? If I understand this correctly, the ROMs mentioned in Jygar's first post are the original main ROM but the Extended ROM is in fact from a Windows Mobile 6 ROM (I do not believe that flashing a ROM will affect the Extended ROM - the problem is that the re-flashed (downgraded) WM5 ROM is starting the Extended ROM installation after the basic OS install (as normal) but that Extended ROM is still a WM6 one.
The page that is linked to includes many Extended ROMs from many countries and devices - one of them an original T-Mobile ROM (here) and if you were to unlock/unhide and mount your Extended ROM you would be able to delete the incorrect (WM6) ones and then paste in these original Extended ROM files.
The Extended ROM files are executed during a hard reset after the OS has been installed - details of how this works are within this forum. I am not sure that you need to do a hard reset but it all depends on whether you stopped the device completing a normal (complete) install. After a hard reset the device will start to execute the Extended ROM files/.cabs and if you stop that with a soft reset as soon as it starts then the device will re-boot with a basic WM build (with no service provider fixes/updates/customisations/settings)
If this is all explaining what you already know then sorry but your question posted is rather open... Hope this helps
ExtROM.nb attached Just put it into an NBH and flash
@tony.wheeler - What was the original radio version of your Vario II? I'm in the process of creating a complete upgrade to restore UK MDA Vario II's to their 'out of the box' state with the original ROMs (IPL, SPL, MainSplash, SubSplash, OS, Radio ExtROM)
Phil
eek, think it was 1.03?
[edit]Have done a search it appears it is 1.05!
only problem is this is HTC_BOOT 0106 and most ppl are now patched to 0108 so I would have thought we cannot downgrade our radio rom.
TBH 1.43 is the best radio rom out and i cannot say a bad word against it. I have only eva updated my radio rom and since the radio update have not had a problem with the origional t-mob os.
Hehe, yeah i found out it was 1.05 as well. Oh well, I'll use 1.07 in my NBH. I now have a complete ROM backup (IPL, SPL, GSM, OS, MainSplash, SubSplash, ExtROM) to revert back to should anything ever happen which means I would need to claim on the warranty.
Phil
The dutch rom seems to be in *.raw files. How can i open of re compile it?
jm012a9749 can you upload it?
RaDeNRFX said:
The dutch rom seems to be in *.raw files. How can i open of re compile it?
Click to expand...
Click to collapse
Same question here.
Does anyone know how to use the .raw files...?
as its all t-mobile users on this thread, what radios are people finding the best? UK
Read, read, read...
wensing said:
Same question here.
Does anyone know how to use the .raw files...?
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoReconstruct
fil said:
as its all t-mobile users on this thread, what radios are people finding the best? UK
Click to expand...
Click to collapse
I keep loosing connection with the 1.50 that came with the WM6 test ROM, and also falling down to GSM even though I'm in a good 3G reception area.
Didn't seem to notice these problems before. I was running Radio 1.48 onto of the old radio.
jm012a9749 said:
Hehe, yeah i found out it was 1.05 as well. Oh well, I'll use 1.07 in my NBH. I now have a complete ROM backup (IPL, SPL, GSM, OS, MainSplash, SubSplash, ExtROM) to revert back to should anything ever happen which means I would need to claim on the warranty.
Phil
Click to expand...
Click to collapse
Any chance of you posting this backup ROM? There are many of us who would be very keen to have this as a safety net for when we have to return our Vario 2s under warranty.
twelve47 said:
I keep loosing connection with the 1.50 that came with the WM6 test ROM, and also falling down to GSM even though I'm in a good 3G reception area.
Didn't seem to notice these problems before. I was running Radio 1.48 onto of the old radio.
Click to expand...
Click to collapse
I too am running with Radio 1.50, after a short-lived update to WM6. I have had no problems at all with 2g or 3g, steady as a rock.
Hi
My Dad just returned from HK with a brand new device, but unfortunately, he didn't realise it was in Chinese. He tried to upgrade it to the WWE ROM, but it is now stuck in the "rainbow" screen and says USB or serial.
Searched the forums, but we're not sure how to get it back to the working Chinese version at the very least! Very disappointed- pls help!
first try to make a reset if it doesn't work make a hard reset or flash it with a dopod cht rom.
Kinda fixed
Thank God, with all the above help, I managed to at least get it back to the Chinese ROM. There doesn't appear to be any ROMs (English or otherwise) located on Dopod's HK website. I have emailed support and will see whether I get a reply.
IMEI-Check it to super CID. Do all flashing with no sim/sd in.
Then you can flash any Rom, including wm6.
_http://forum.xda-developers.com/showthread.php?t=304209
CID unlock
Pyrofer said:
IMEI-Check it to super CID. Do all flashing with no sim/sd in.
Then you can flash any Rom, including wm6.
Click to expand...
Click to collapse
Will this fix all my problems, ie. let me flash to the WWE from the CHT version??
Any future problems with the device if I unlock my U1000? This would be great if people could share their experiences. There are lots of threads here about changing language, but no one seems to have tried this...
dc said:
Will this fix all my problems, ie. let me flash to the WWE from the CHT version??
Any future problems with the device if I unlock my U1000? This would be great if people could share their experiences. There are lots of threads here about changing language, but no one seems to have tried this...
Click to expand...
Click to collapse
Just go ahead and do it. Mine was Ameo Dutch. After Imei-check unlock I now have WWE or any rom I want. What future problems are you imagining?
I'm just thinking about the best thing for me to do.
Assuming Dopod doesn't do it for free (I doubt they will since it was our error), I might just go ahead and do it.
I just want to be in a position to take advantage of the WM6 upgrade whenever that is available. At this stage, with the CHT ROM, does it mean that if I do nothing and upgrade to the official WM6 when it is available, I will only be able to get the Chinese version?
Thanks
dc said:
I'm just thinking about the best thing for me to do.
Assuming Dopod doesn't do it for free (I doubt they will since it was our error), I might just go ahead and do it.
I just want to be in a position to take advantage of the WM6 upgrade whenever that is available. At this stage, with the CHT ROM, does it mean that if I do nothing and upgrade to the official WM6 when it is available, I will only be able to get the Chinese version?
Thanks
Click to expand...
Click to collapse
This is your best choice up to this moment. Its free
http://www.mylanguage.mobi/index.php?option=com_content&task=view&id=4
It's done!
I CID unlocked my U1000 from Imei-check, and was able to flash with the WWE ROM! Now it just makes my device perfect! Thanks everybody for their help. Bring on WM6...
Hi DC
where did you find the WWE ROm, can you give me the link for me to download
Thank YOU
From here: http://wiki.xda-developers.com/index.php?pagename=Athena_ExtendedRoms
is this the completed rom(including wm6 and extended rom) or just extended rom?
Hey,
Newbie here. I own two smartflips bought from i-mate hq (Dubai). However, i'm now in Aus. WM6 looks nice and i must say, great work and appreciation for those who cook up these ROMs. However, i noticed that all these ROMs start off from either Cingular or QTEK or HTC. why leave i-mate ROMs behind guys? Anyways, before i try out any of these ROMs, i just don't want to end up killing my phone. I've searched high and low for i-mate stock ROMs (WM5). I saw one in a post but that was like WWE or something which i'm not sure what it means. I don't want to register on i-mate and do loads of form-filling and IMEI filling just to get some ROMs. Anyone have any idea of where i can acquire some 'stock' WM5 i-mate ROMs (not qtek or cingular or htc or wotever).
The other thing.. i haven't SuperCID-ed my smartflip. I tried to get to the bootloader (for no reason.. just experimenting) by pressing the keys n all but it doesn't show up. it goes to the i-mate screen.. then flashes an HTC logo and boots WM5. Once again my smartflip is Out-of-the box, hope that helps someone explaining the phenomena. i do have the i-mate CD that came with it. However didn't find and option to install Windows Mobile 5.0. I need a ROM to keep a backup in case i screw up. If anyone could help me obtain an i-mate WM5 ROM, it would be greatly appreciated.
Also, how would one find out the IPL and SPL of the smartflip? As i mentioned i wouldn't like to brick my phone. It is mentioned somewhere that the 3.06 or wotever IPL and SPL version are not capable of flashing through micro-sd card. Not sure but i think the 4.0 or wotever can flash through micro-sd card. Apart from the link(to files) posted in a thread, isn't there an 'official' way of getting to update the IPL and SPL?
Sorry for such a long post. One thing i must say, great work guys. I would like to suggest people to follow up on their threads. there was one 'bricked' post but the person said he found a solution but never posted what his solution was. It would be helpful if he could have posted the solution as it does help others. Apologies if i said anything wrong.
Thanks,
Dan.
You used to be able topick up Imate roms from ftp://ftp.clubimate.com
But they won't be nearly as good as the cooked Wm6 ones. Just follow the instruction and flash away.
(WWE means worldwide english)
Flash one of the cooked ones! I use Erofich's 6.1 and it's great.
WWE just means WorldWideEnglish as opposed to other languages.
Good luck
I have a SmartFlip upgraded with GnatGoSplat's WM6 ROM (Eurofich' WM6 is better but GPRS doesn't work): it works fast and without problems.
WM6 ROM, SPL/IPL and Radio at:
http://forum.xda-developers.com/showthread.php?t=368715
Imate didn't upgrade the SmartFlip's ROM to WM6.
D'rath
D'rath said:
Eurofich' WM6 is better but GPRS doesn't work
Click to expand...
Click to collapse
What's a problem? Use my WM6.1 where everything works
http://forum.xda-developers.com/showthread.php?t=374397
just install a Cumulative Fix after flashing and have a fun
Btw, you can also use Jony_aa's WM6 AKU 0.5.1 ROMs with most useful software included, or clean version
http://forum.xda-developers.com/showthread.php?t=373099
Thank you all!
Hi,
Thank you all for your responses. i-mate roms at imate ftp site is confirmed. Thanks unwired. The thing is i take calculated risks and have most info before i do some thing. so if i end up somehow bricking my phone, i will know what to do before dad kills me . Now i just need to update the IPL/SPL and get into bootloader to see if it works. Then gonna flash with WM6 or WM6.1. I just needed a stock ROM to keep as backup because its mentioned somewhere that if your phone is bricked, u can try to flash it using micro-sd card flashing. but that only works with stock ROMs if WM6 flashing fails. Anyways, thanks once again. i will keep you guys updated on my progress.. Thanks!
Best Regards,
Dan.
Erofich said:
What's a problem? Use my WM6.1 where everything works
http://forum.xda-developers.com/showthread.php?t=374397
just install a Cumulative Fix after flashing and have a fun
Btw, you can also use Jony_aa's WM6 AKU 0.5.1 ROMs with most useful software included, or clean version
http://forum.xda-developers.com/showthread.php?t=373099
Click to expand...
Click to collapse
I Try WM6.1 but it gives me problems importing old sms (the inbox elements are stocked in send items)... i must import old sms ^^'
Jony_aa with Neo is very nice but the home isn't so custumizable: so i flash Gnat's ROM.
D'rath
PS: My English is very hungly O_O
SDA_ApplicationUnlock
Where can one get the SDA_ApplicationUnlock.exe? the superCID thread didn't mention where to get it or either i missed it... anyone out there to help me??
Thanks,
Dan.
(If i succeed in doing this.. i'll make an Utimate WM6 for STRTRK guide)
IPL/SPL
Hi,
Sorry for multiple questions. I still haven't been able to get into the bootloader by pressing the voice notes and camera and power on key. I'm still not sure how it goes. Do you have to hold the keys, press the power button and let go immediately of all the three keys or do you have to hold the power button for long with holding the voice and camera keys? i need to check which version of the bootloader i have to make sure it supports flashing from micro-sd. Thanks in advance.
Regards,
Dan.
EDIT: I was also looking for some way to backup software from my current WM5 ROM. There are some apps that come in-built which i like. But since i don't have the .cab(s) i was wondering if there would be a way to backup software and later on install it. Any help would be greatly appreciated.
Out of a million tries, I only managed to get into the bootloader ONCE that way. Okay, I exaggerate, but I found it almost impossible to use RECORD, CAMERA, and POWER to get into bootloader. Instead, I've found with the phone OFF, press RECORD, CAMERA, and plug the USB connector into the PC while holding those buttons. It goes into Bootloader every single time that way.
You can back up the built-in apps, but it requires figuring out which files belong to which app, and also getting their registry entries. Then you can either manually copy all those files into the phone and manually import the registry entries, or make them into a cab file to automate it.
WOW.. thnx for that!
Yup! Worked like a charm! i have IPL/SPL 1.02 or wotever.. so i don't need to worry about micro-sd card flashing problems ( i hope i never need to use that in my life). So if it works this way.. i would recommend others who have bricked their phones and trying to flash it holding the record, and camera button while phone is off, plug it in the usb. As soon as i did that, Vista picked it up as a mobile device. the bootloader ( the screen sucks! what a dreadful combination of colors!) also shows a usb sign at the bottom. I hope this info helps those who bricked/killed their phone and were finding it hard to re-flash it. As it is mentioned in some thread... if wm6 flashing fails, u have to revert back to stock rom WM5 (cingular rom for cingular phone, i-mate rom for i-mate, etc) and then re-flash with WM6. I wonder if rom update utilities work when in bootloader connected to pc.
Once again, thanks for your reply GnatGoSplat. As for the apps, yea.. i know its bad. I did check over onto the i-mate site and found a file 'Arabic...' something. it didn't mention it as a rom so i'm hoping they are the software packages that come with the default middleast rom. You might have heard of 'Portableapps' on PCs. They are little beauties. Because the original windows and windows mobile are linked closely.. i might wonder if there could be a way to port those ( or even create your own) onto windows mobile. I know how to make portableapps so if you need any info, i think i could help unless someone knows better.
So where do i get the SDA_ApplicationUnlock file? Thanks.
Regards,
Dan.
Dan_Ultimate said:
So where do i get the SDA_ApplicationUnlock file?.
Click to expand...
Click to collapse
Get it from attach
Thanks.. sadly, i've got some bad news...
Hi,
Thanks for the file Erofich. Unfortunately, I've just been caught up with studies and hence will not be able to work on modding my i-mate until i get some free time. however, i'm still going to try to work on an 'Ultimate WM6 for Startrek Guide'.
Its just that its better for end-users because some of the information is scattered around and 'some' of the instructions are a bit hard to follow (no offense to anyone). If anyone has any concerns or is against my actions, please let me know.
Regards,
Dan
i want EUR rom, with spanish language... all roms are WWE in english or russian.
know any european rom wm6 for star trek?
moebior said:
i want EUR rom, with spanish language... all roms are WWE in english or russian.
know any european rom wm6 for star trek?
Click to expand...
Click to collapse
You can translate some menu (in the post of WM6 by Eurofich you find how) but not all of them.
You can get the xT9 with spanish language with a cab you can find looking in that ROOM.
D'rath
arabic laguage smartflip
sir i try to make arabic laguage my i-mate smartflip but i cant do it..i seek from last one month plz help me tel me how can i make arabic my smarflip.plzzzzzzzzzzz.
irfansamsia said:
sir i try to make arabic laguage my i-mate smartflip but i cant do it..i seek from last one month plz help me tel me how can i make arabic my smarflip.plzzzzzzzzzzz.
Click to expand...
Click to collapse
What's the version of your rom ?
for official rom ( win 5.0 ) , you can go to this topic :
http://forum.xda-developers.com/showthread.php?t=400183
and if you install erofish's great rom ( win 6.1 ) go to this one :
http://forum.xda-developers.com/showthread.php?t=465294
i-mate smartflip
Thanx for repy bro.but same problem ,i update widh this rom..but stil same.no arabic when i try to instal arabizersute its say unsuccsecful..when i try to instal it by memory then also same..plz help me ..i have two device same proble.
Hi
1. do you use from this ro M : WM6.1 Build 5.2.19593 AKU 1.1.7 by Erofich ?
2. second link is specially for imate smartflip then i don't now what's your problem ( maybe don't install your new rom correctly )
3. arabizer must be installed on phone memory ( not memory card )
Good luck !
Thanx bor.its working nice .....thanx again...mawah....
Hi guys I feel totally stupid right now. And upset. I got a used 7500 and it had a Michy ROM. I put the original WWE(I think?) ROM on it and that worked. Then I installed the AP 4.0 ROM and that worked fine. I then wanted to go back to the WWE ROM and when I tried installing it I get the SPL errors... I've tried installing all of the original WWE ROMS and none seemed to work and only gave back the error. Now I'm stuck at the colored striped screen and can't install a ROM or doing anything. I'm begging your help guys. I'll depost 10$ USD into anyone's paypal who can point me in the right direction and help me get the original WWE ROM back on it from htc's site. I'm thinking I need to use maybe MTTY to get it out of "bootloader"... But I don't know the commands... Thanks in advance. I've searched and tried a couple suggestions to no avail...
Check this thread out and this post in specific.
Downgrading
All Stock ROMS and many cooked ROMS can (only) be flashed with SPL 1.2.
The rest of the cooked ROMS (like AP4 and AP5) can (only) be flashed with SPL 3.5.
Once you have flashed a SPL 3.5 ROM you cannot easily go back to SPL 1.2 ROMS.
But there IS a way.
You can find a thread about the downgrading process here.
do you still need help ? I dont remember if you PM'd me, maybe not.
but yeah, just use the spl downgrader i made.