Related
Hi!
Anyone fonud out until now where to get the 22pin connector for the MDA/XDA III device? It has changed a bit from the iPAQ 3800 style, so accessoires for I/II won´t work
Furthermore, has the pinout changed?
What I need is a cable for connecting my GPS-reciever, or the parts to build one.
Thanks in advance,
Danyel
OH NO, you are saying that the MDA II accessoried, chargers, etc., won't work with the MDA III?
Well, it looks like that...
I have an USB-sync-cable, car charger and my GPS-reciever. Without forcing the plug it won´t fit into the new connector.
The new one has a gab on one side and two little pits wich fit into gaps in the devices connector.
I´ll post a picture of the old and the new one... MDA III´s camera is not quite good for macro-photos.
Well, I have "reconfigured" my old GPS- and USB-cable. It´s just takeing away some of the plastic on the connector. Both cables work fine for the MDA III now, take a look at the picture:
hey folks,
i try my best english!!!!
at dev_dme
i got the qtek2020 from vodafone D2. now i want to plug my usb gps reciever with sirfII chipset to the pda. 5v for the usb power comes from accus. this wouldn't be the problem i think. but how i figure it out which connectors of the pda are the right connectors for die TX and RX of the reciever? and the final question: is this what i want to do (usb pc gps reciever at pda) possible?
if you want t answer me in pm dann auf deutsch ;-)
thanks.
Anonymous said:
is this what i want to do (usb pc gps reciever at pda) possible?
Click to expand...
Click to collapse
Therefor you´ll need a USB to serial converter, as far as I know.
if you want t answer me in pm dann auf deutsch ;-)
Click to expand...
Click to collapse
No PM, you haven´t been logged in
22 pin adaptor for QTEK 9090
hi, you need original connector you can try with 2020 22 pin but after some days or week you will damage you QTEK 9090 and you not be able to use anymore the connector! i suggest you to buy ORIGINAL see here available : http://www.bluetrade.fr/achat/produit_details.php?id=76226
i hope i'm logged in now!
to dev_dme you missunderstood me? i have an usb gps mouse so i need a seriell one. and there are no converter from seriell to usb.
to last guest
i think i posted in fals thread. i have a qtek 2020!!!! no 9090.
There are USB to serial converters made by Iogear, search the web. You would have to redue the cable to connect to your Qtek. But since you have bluetooth, though the old one away and get a blue tooth GPS, much nicer.
converters from usb TO seriell but not from seriell TO usb. i'm right?
The USB driver was on laptop to change the port to a serial port but the communication was bidirectional.
You could also look at maxim semiconductors, I know they make a chip that converts serial to USB but I couldn't find it.
http://www.maxim-ic.com
but i need usb to seriel converter..... i want to use an usb device at a seriell port
They have a device, I saw it in EE Times twice (as I said I need that) that will do exactly what your looking for. It would connect to a USB device, takecare of all the protocal and then spit out serial bits of the data. I beleive the formating (USB-serial bin/ASCII, bit ording) was able to be changed via reg settings.
maybe search EE times website.
aimchr said:
but i need usb to seriel converter..... i want to use an usb device at a seriell port
Click to expand...
Click to collapse
Well, your GPS mouse is a USB client (slave). You can only connect it to a USB host (master), which the XDA II is not. So you would need an adapter that contains a USB host. As paulmc says, they seem to exist, but seem to work only with "big" Windows (they need drivers), and I am quite sure they are really expensive.
I really recommend you get either a Bluetooth or a regular serial GPS mouse. Both are easy to connect to an XDA II.
Cheers, Daniel
hello folks,
information for all users they helped me: now i bought a holux gm 210 gps receiver with ps2 connector. it should be one of the best.
but now new questions:
1. is there a german plattform like this in the internet? which one?
2. how can i get 5VDC from a the 12VDC connector in a car? i dont need 4,5 or 6V!!!!
3. who know anythink about the holux gm210 voltage supply (spannungsversorgung). how much V need the gm 210? exactly 5VDC?
thanks
bye Christian
Anonymous said:
but now new questions:
1. is there a german plattform like this in the internet? which one?
2. how can i get 5VDC from a the 12VDC connector in a car? i dont need 4,5 or 6V!!!!
3. who know anythink about the holux gm210 voltage supply (spannungsversorgung). how much V need the gm 210? exactly 5VDC?
thanks
bye Christian
Click to expand...
Click to collapse
1. There are several. Try www.pocketnavigation.de for a start.
2. There are voltage regulators you can buy. But be very careful, the voltage in a car is full of spikes and other nasty things. You need a good voltage regulator if you don't want to endanger your new Holux. The usual solution is to buy a holder for the PDA that also has a connector for the GPS mouse. This gives you a well filtered voltage for your mouse.
Cheers, Daniel
tadzio said:
1. There are several. Try www.pocketnavigation.de for a start.
Click to expand...
Click to collapse
more more more
tadzio said:
2. ....is to buy a holder for the PDA that also has a connector for the GPS mouse. This gives you a well filtered voltage for your mouse....
Click to expand...
Click to collapse
maybe its silly but i dont wanna buy i want to build it by myself.
because i want biuld an accu-charger for my qtek too. it should supply the gps mouse too!!!
i cant describe it better in english. damn..... :evil:
also i need thias speciial pda connector for the mdaII (aka qtek 2020). where can i buy it for low?
and some more important for me: i need information for the pins. what pin for which signal?
Does anyone know if the pin-setup for the 'blue angel' aka Qtek9090 is different then the 'Himalaya' aka Qtek2020?
I want to connect an external speaker and microphone to it (described here) but i'm not sure if the pin-layout is the same :roll:
Thanks!
Grtz,
DUTCH
anyone found the pinout for QTEK9090(Blue Angel) yet ?
please share.
All the ROMS don't charge through USB Car Charger...
Except Koster v3. It was the only one that have done it....
Any awnsers ??
Thanks all!
xdapocket said:
All the ROMS don't charge through USB Car Charger...
Except Koster v3. It was the only one that have done it....
Any awnsers ??
Thanks all!
Click to expand...
Click to collapse
Me too, except koster's rom, i haven't found any rom that works with usb car charger! the reason is he used the original wm5 drivers in his rom. I wish somebody use his rom as a base rom and add Touchflo and cubes to it.
I don't know but my phone charges with my car charger no softreset was needed
mine works in car...no probs at all
gullum.. this ROM rocks hard great job!
I flashed the new V6 4MB rom, can't charge by car.
It charged 2% and once I start using it, it stop charging. Battery Status shows this.
Will try the 8MB Pagepool to see if there's a difference.
My charges in my car, and others cars of course. No problems here.
From what I know; the led is not turning red while charging thru usb but it does charge eventually.
it's the same for me, no charge in the car. that's really bad because it makes it impossible to use the phone as a navigation system - after 3 hours it's empty.
i will have to go back to wm5, when I can't find a solution for that and I love gullums rom, it's perfect.
any suggestions??
greets, david
Try doing a soft-reset while the USB cable is plugged in and charging. I've had similar problems with other ROMs and this approach appeared to work. There seems to be some other posts around that mention the same solution.
thanks a lot, it works!!
jjackson02 said:
mine works in car...no probs at all
gullum.. this ROM rocks hard great job!
Click to expand...
Click to collapse
Hi! That's why you plugged it on your pc before connecting your prophet to your lighter plug. Try softreseting before pluging it in your car, and so you can be 100% sure that this works without that trick.
cheers
Sometimes i also have this problem ... i haven't yet found a way to reproduce it, but sometimes i need to soft reset to be able to charge via USB. Also when this happens, i notice that it "discharges" the phone while connected to the usb. After doing the soft-reset, all works fine. I havent tested in-car.
Hi people,
can someone try to charge in the car with a 5V - 1000mA charger?
I'm thinking that the problem may be with the type of charger and not the ROM...
The wall charger is also 1000mA, typically the car chargers are 500mA.
Hope to ear something from you. Thanks all!
I just had a look at mine and it's 5V and 2A so I hope it wan't coock my phone but it works
OK ... some Answers!
The Car Charger Problem is a known error! This error have all WM6 Cooked Roms with the Battfix.cab. The only Rom without this error is Kosters Rom with Original WM5 Prophet Drivers!
Copy the Driver and Reg settings from Koster Rom and it works too :->
About 2A Chargers ... guys ... this is only a Powersupply! If the internal Charger can Charge with more then 500mAh and the Powersupply can handle it ... it charge with more mAh!!! Prophet and other device can only handle 600mAh ~ 700mAh. Its a Hardware based Limit!
Only Original Prophet Drive can switch the Powercontroller/Chargingcontroller in the Speedcharging modus.
NetrunnerAT said:
OK ... some Answers!
The Car Charger Problem is a known error! This error have all WM6 Cooked Roms with the Battfix.cab. The only Rom without this error is Kosters Rom with Original WM5 Prophet Drivers!
Copy the Driver and Reg settings from Koster Rom and it works too :->
.
Click to expand...
Click to collapse
Ok
Are you willing to say what these settings are for those of us without the koster ROM
rgs
no ... if i know this i can tell!
i am not a romcooker ... i only read this board and know a lot of errors and koster have tell his change and why they use wm5 driver.
NetrunnerAT said:
OK ... some Answers!
Copy the Driver and Reg settings from Koster Rom and it works too :->
Only Original Prophet Drive can switch the Powercontroller/Chargingcontroller in the Speedcharging modus.
Click to expand...
Click to collapse
Hi,
I'am so happy to read that ! but now you must give all your information What's the process ? it's during the cook or can we do it after ?
Thanks
edit : ok i've just read your last post
Same problem
I had found the same problem - not charging via usb charger. The interesing point, that if you re-connect again in short period of time, it will charge. Now if you will use GPRS, WiFi, browser , close apps. - charging from charger will not work until SR. I belive, that because each resource hungry process will change a battery driver setting (and as you know, we are living with uncompatible bat driver)
this is a known problem since wm6 roms are cocked form wizard.
does any body know how can make the charger for my hurricane with a usb cable by connecting it to an nokia charger
becoz the charger is not availabl;e in our country
help plz
wajidgates said:
does any body know how can make the charger for my hurricane with a usb cable by connecting it to an nokia charger
becoz the charger is not availabl;e in our country
help plz
Click to expand...
Click to collapse
The Motorola Razor or Slvr charger will work. I think any mini usb charger will work.
not all mini usb. i bought some not original car charger for mot V3 and it doesn't work with C550
lazaj007 said:
not all mini usb. i bought some not original car charger for mot V3 and it doesn't work with C550
Click to expand...
Click to collapse
For charging there must be a connection (short) between two pins in mini-usb, imo pin 4 and 5 (not shure!).
Some newer firmwares have a selectable option ´load by usb´, this will be able to charge w/o the short.
???????
can u explain it little bit more
wajidgates said:
can u explain it little bit more
Click to expand...
Click to collapse
Start/Settings/PowerManagement/EnableUSBcharging -enable-
or
pin 4/5 (gnd) shorted in usb connector
Sorry Mate
cant understand plz explain it completely
i am a beginer
is there way to connect td2 to charger and audio in on car radio at the same tame trough mini usb
hi
you can use this
http://www.ssmoviles.com/cable-de-audio-multifuncion-htc-yc-a300.html
on HTC home page you can buy too
bye from spain
Check this out, not a charger but a solution for audio.
http://cgi.ebay.com/CAR-FM-TRANSMIT...s?hash=item3a52f1d68f&_trksid=p3286.m63.l1177
deliyan said:
hi
you can use this
http://www.ssmoviles.com/cable-de-audio-multifuncion-htc-yc-a300.html
on HTC home page you can buy too
bye from spain
Click to expand...
Click to collapse
I have one of those, but have problem with hearing the engine revs when car charger is connected. I don't know if this is due to the charger or if the adapter is poorly shielded yet, going to try some other car chargers...
Hi. I recently bought this phone. The No.1. draw in purchasing it was the ability to use a full size usb keyboard with it - for writing emails, etc. (other android phones seem to suggest that this is available or about to become available - but I couldn't get a clear answer on this so I went with the TG01).
It works fine. However, a usb keyboard (rated 50mA) uses up the phone's battery in half an hour! Is there a discreet/compact powered usb hub that I can use to power the keyboard - and still allow the phone access to the keyboard?
My specific scenario means that I have no means to install any software on the pc that I am using (its a work thing).
Looking forward to any further insight that anyone can provide.
borderfox said:
Hi. I recently bought this phone. The No.1. draw in purchasing it was the ability to use a full size usb keyboard with it - for writing emails, etc. (other android phones seem to suggest that this is available or about to become available - but I couldn't get a clear answer on this so I went with the TG01).
It works fine. However, a usb keyboard (rated 50mA) uses up the phone's battery in half an hour! Is there a discreet/compact powered usb hub that I can use to power the keyboard - and still allow the phone access to the keyboard?
My specific scenario means that I have no means to install any software on the pc that I am using (its a work thing).
Looking forward to any further insight that anyone can provide.
Click to expand...
Click to collapse
No, This is a major problem with TG01, You can use the port either to charge or to connect to USB Hub or Headphones..
In my opinion, you have the following alternatives:
1- Buy a high capacity battery.
2- Buy a bluetooth keyboad.
Hope this helps.
wafeeq said:
No, This is a major problem with TG01, You can use the port either to charge or to connect to USB Hub or Headphones..
In my opinion, you have the following alternatives:
1- Buy a high capacity battery.
2- Buy a bluetooth keyboad.
Hope this helps.
Click to expand...
Click to collapse
Hi wafeeq. Thanks for taking the time out to respond. Is there any other smartphone (or mini tablet) that will do this job with a usb keyboard?
I guess I can go for an extended life battery - I think there is one on the market that is 4x capacity - so thanks for that suggestion.
borderfox said:
I guess I can go for an extended life battery - I think there is one on the market that is 4x capacity - so thanks for that suggestion.
Click to expand...
Click to collapse
Having such battery from Mugen ( it is only company I know that makes 2400 and 3900 batteries for tg01 ) You will have bigger back cover ( You can even buy big cover itself - You will save a lot of money. Mugen has very expensive batteries ) so if You know proper person , You can create any junction in it ( maybe with addition of few electronic parts ) to .... charge battery from external charger ( or usb slot from PC or laptop ) in the same time when external battery will be connected to tg01 usb host.
Regards
fxdjacentyfxd