Related
Here is another new ROM from the still unreleased Cingular 8525: HTC Hermes (HERM100) branded from U.S. Operator Cingular.
ROM Version: 1.34.502.1
ROM Date: 09/22/06
Radio: 1.16.00.00
Bootloader: 1.06
As always, download link on the wiki upgrading page:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
If you have questions be sure to read the Hermes wiki first, specially the Upgrading FAQs.
Notes on this ROM:
* See the threads on the previous Cingular ROMs for upgrading issues such as enabling video calls, band selection tab, ExtROM customizations, PTT button, etc...
-v1.30
-v1.31
-Downgrading instructions
UPGRADING INSTRUCTIONS:
* People with bootloader <= 1.04 just follow the normal procedure (run RUU twice after invalid vender ID error).
* People with bootloader 1.06 (those who have flashed the cingular 1.31 rom) need to downgrade to bootloader 1.04 first:
1) Put your device in bootloader mode by holding the side Ok button and the power button and at the same time reset with the stylus.
2) Upgrade to a ROM matching your CID, that is a ROM from your vendor (TyTN owners use the TyTN rom, dopod owners the dopod rom, jasjam owners the imate rom, etc...). This will get you back to bootloader 1.04
3) Flash the new 1.34 ROM as usual (run RUU twice after invalid vender ID error).
Enjoy
Guys, i'm at work and still haven't had time to flash it on my Hermes, so the first flashing it please update the OS build and protocol version on the wiki. Thanks
Any chance that we have release notes for this ROM uploaded as well?
Thanks.
cant run the rom file, it said file corrupted. i downloaded twice, both time it said rom file is corrupted. please re upload the rom
Tried to flash from 1.31 to 1.34 - but I get error message ERROR [294] INVALID VENDER ID
Anyone had any luck flashing 1.34
Doesnt upgrade from 1.31 - just get an invalid vender id error...
EDIT: can't downgrade either using the bootloader method - seems like we are now stuck on this rom until a solution is found!
Have you tried to restart the falshing SW without touching the hermes and without disconnecting the USB?
You are supposed to do this a second time when you get this error
Eric
Eric Duprat said:
Have you tried to restart the falshing SW without touching the hermes and without disconnecting the USB?
You are supposed to do this a second time when you get this error
Eric
Click to expand...
Click to collapse
Yep - tried this with Dopod, Cingular 1.30, and HTC ROMs - all get the same invalid vender ID error...
tried that, but it is no help
ROM FILE is corrupted. download 3 times, everytime it got erros and said the rom file is corrupted. please re upload the rom
netboy said:
ROM FILE is corrupted. download 3 times, everytime it got erros and said the rom file is corrupted. please re upload the rom
Click to expand...
Click to collapse
ROM file is fine. Runs OK here - just cannot flash to a 1.31 device...
netboy said:
ROM FILE is corrupted. download 3 times, everytime it got erros and said the rom file is corrupted. please re upload the rom
Click to expand...
Click to collapse
Clear your cache, rom file is OK, I checked the md5sum of it.
Same here - Invlid vendor ID.
Something's fishy here. Some can downgrade and some cannot. What's your device's CID awharton if I may ask?
It makes sense that a direct upgrade from 1.31 -> 1.34 will fail. However, a downgrade to the original TyTN ROM for users having a real TyTN (CID QTEK_001) followed by an upgrade to 1.34 should work. I believe TyTN owners have been reporting success at downgrading from 1.31 although this is mystifying too as one would expect that the bootloader version downgrade should prevent this also....
Sleuth255 said:
Something's fishy here. Some can downgrade and some cannot. What's your device's CID awharton if I may ask?
Click to expand...
Click to collapse
Its a Orange M3100 SIM unlocked (HERM100)
let me REBOOT my pc and try again.
i cleared my cache. still got erros. and said can not unpack, file is corrupted..
@people getting invalid vendor ID:
Please report:
- which device do you have: TyTN, Vario II, SPVM3100, DOPOD 838pro, etc...
- Your device CID: QTEK_001, CDL__001, O2___102, etc... can be checked by "info 2" bootloader command, leave blank if you don't know it.
- Current ROM on your device before trying to upgrade
- Bootloader version
Sleuth255 said:
Something's fishy here. Some can downgrade and some cannot. What's your device's CID awharton if I may ask?
It makes sense that a direct upgrade from 1.31 -> 1.34 will fail. However, a downgrade to the original TyTN ROM for users having a real TyTN (CID QTEK_001) followed by an upgrade to 1.34 should work. I believe TyTN owners have been reporting success at downgrading from 1.31 although this is mystifying too as one would expect that the bootloader version downgrade should prevent this also....
Click to expand...
Click to collapse
True - thinks this makes sense. As Orange haven't released an upgrade yet I can't test this out. Need someone that has a Dopod or TyTN to experiment...
I'm trying this now. I got the same invalid vendor ID (HTC TyTN, running 1.31), and now I'm flashing back to 1.18. This seems to be working, albeit very slowly. I'll keep you updated if I can upgrade from 1.18 - 1.34; the flash to 1.18 should take about 25 minutes.
For people on Cingular, does push to talk work on this rom? If not, then this is not the final rom.
After having updated a HTC TyTN (german version) with bootloader 1.04 and CID "QTEK_102" with a new rom HTC (english) 1.18.416.1 07/22/06 with bootloader 1.06 and CID "QTEK_001" I ckecked my "new" CID with mtty and the command "info 2". The program tells me that I have now the CID "QTEK_102" like on the old german rom although I flashed a new enlish one. Now I am not able to flash any other version even if I try to flash the same update again! I am quite confused, because I thought the CID is depending on the rom that I flashed last?! How can I now go back to bootloader 1.04? I would need the same CID for that but there is no rom with CID "QTEK_002" and bootloader 1.04 available as far as I know??? Sorry for this newbie question, but I couldn't find any hint elsewhere....
Okay, I solved the problem by following the thread of hookhook (http://forum.xda-developers.com/showthread.php?t=284401). THANX!
Although all the information can be found on the forum and in the HTC Hermes Wiki there are always many posts with questions about upgrading and unlocking. I hope this will make it a bit clearer for you:
Bootloader
The bootloader is the place where you can change the low-level software parameters and some hardware parameters of the Hermes, change and read the ROM and provides information about it.
The bootloader is invoked by pressing down both the POWER button and SIDE OK together and using the stylus at the same time to press the RESET button at the bottom.
The bootloader version is shown for a short amount of time when booting the device. You'll see "SPL-1.0X"
Versions
1.04
There is a bug in bootloader 1.04 wich allows you to flash any ROM without a CID check. You have to be in bootloader mode to use this bug.
It's possible to upgrade the RadioROM. You can even flash a patched RadioROM wich is needed to unlock your device.
1.06
The bug from version 1.04 is fixed. Without downgrading to a Shipped ROM with bootloader 1.04 that matches your CID it's not possible to flash a ROM with a different CID.
The RadioROM can't be upgraded. You have to downgrade to bootloader 1.04 to unlock your device.
1.09
You can't downgrade to bootloader 1.04 by flashing a Shipped ROM. However imei-check.co.uk is able to downgrade the bootloader.
There was a solution posted on this forum, but it was stolen from imei-check and was removed. If you are not willing to pay you have to wait until another solution is developed.
The RadioROM can't be upgraded. You have to downgrade to bootloader 1.04 to unlock your device.
CID
The CID your device has varies from operater to operater. It should garantee that only upgrades from a single operater can be installed (to ensure the device is branded etc.)
You can make your device SuperCID wich is some kind of "root-mode". Then you will be able to flash every ROM without thinking about bootloader versions and CIDs.
To find out wich CID your device has use the command "info 2" in bootloader. Read Hermes_BootLoader to know how to use the bootloader.
Preparations
Before you upgrade your ROM (wich will also upgrade your bootloader) you should make your device SuperCID.
Especially if you either upgrade to bootloader 1.06 and there's no Shipped ROM Upgrade with bootloader 1.04 available that matches your CID or upgrade to bootloader 1.09
Unlock / Make your device SuperCID
Use pof's SIM Unlock v2a. This will flash a patched RadioROM that is needed for the unlocking process. Unlock v2a makes your device SuperCID and removes the SIM-Lock.
You need bootloader version 1.04!
The process of flashing the RadioROM and use the unlocker is explained here
There is one restriction: At the moment it's not possible to unlock X01HT devices wich where bought after 12/1/2006 and have bootloader version 1.09 and RadioROM version 1.14.0.10! Please be patient.
Radio version can be checked from Start->Settings->System->Device Information:Radio Version.
Downgrade Bootloader
If you have bootloader version 1.06 and there is a Shipped ROM Upgrade with bootloader version 1.04 available that matches your CID you can flash it to downgrade your bootloader.
Otherwise - you are on bootloader 1.09 or there is no Shipped ROM Upgrade available - you have to use imei-check.co.uk or wait until another (free) solution is developed.
For the method imei-check uses to downgrade the bootloader a working operating system is required.
Upgrade the ROM
If you flash a ROM the first time you should read Upgrade For Beginners and the Upgrade FAQ if you have further questions.
Available Upgrades are listed here
Upgrade RadioROM
There are also Extracted RadioROMs available. You need bootloader 1.04 to flash these!
good summary sn00x. you should post this on the wiki as well.
tthank u very much for the information. it is a bit clearer for me now
Excellent summary for the beginner! Vielen Dank!
Please also read Quentin-'s Hermes Upgrading Guide for a detailed description of the upgrade process and information about ExtendedROM cooking.
it should be posted in the wiki
cristal clear now.... I had posted a question in another thread and read a lot of forums without success. Now I know for sure that have to wait... any ideas on how much time.. thanks for all the help!!!
Super CID
When one upgrades a Radio ROM is it necessary to go back and make the device Super CID again, or is it sticky.
The reason for this question is that I down graded to bl 1.04, made my device Super CID as it was never simlocked, and then upgraded my Radio to 1.27. My device returned a QTEK code, so I just ran Super CID again. It now again displays Super CID.
Is that the way it works?
Thanks for your posting - it certainly has taught me a lot!
@basilrsa: To make SuperCID sticky you need to run Herm_Unlock_v2a.exe on your phone while it has the patched radio that shows SuperCID. Otherwise it is lost after radio upgrades.
Thanks again pof
pof said:
@basilrsa: To make SuperCID sticky you need to run Herm_Unlock_v2a.exe on your phone while it has the patched radio that shows SuperCID. Otherwise it is lost after radio upgrades.
Click to expand...
Click to collapse
Thanks pof for that information. That's what I figured out so I reflashed the patched radio,reran Herm_Unlock_v2a.exe and then flashed the 1.27 radio.
Just to be sure I reran the Herm_Unlock_v2a.exe.
I guess that should be OK
Has this been put into the wiki? Someone please do the honours and report back with a roger wilco.
V
bl1.04
Gentlemen,
Quentin wrote:
"Even with the Super CID hack you cannot install a different radio
if your ROM installed BootLoader 1.06 or greater."
If my current machine state is
1. "Sticky" superCID has been accomplished.
2. Task 32 verifies the device is in superCID mode.
3. Bootloader page displays 1.04
does it stay that way for good regardless of what I flash? If I flash a rom which carries bl1.09 what is the bootloader version going to read on the device at the completion of the flash process?
If I make this simple and go buy a IMEI-check unlock to superCID my bl1.09 system will the bootloader page change to read bl1.04 and will it stay that way regardless of what I flash?
Is bl1.04 going to stay put with subsiquent rom loads?
Thanks
pof said:
@basilrsa: To make SuperCID sticky you need to run Herm_Unlock_v2a.exe on your phone while it has the patched radio that shows SuperCID. Otherwise it is lost after radio upgrades.
Click to expand...
Click to collapse
Hi, I am quite new with all this things. I just upgraded my radio to 1.27.00.00, does it mean, that my phone is CID locked again (I unlocked it together with SIM unlock).
How do I find oud, whther the phone is SuperCID or not. Thnax a lot
zzzp said:
Hi, I am quite new with all this things. I just upgraded my radio to 1.27.00.00, does it mean, that my phone is CID locked again (I unlocked it together with SIM unlock).
How do I find oud, whther the phone is SuperCID or not. Thnax a lot
Click to expand...
Click to collapse
Read the WIKI first... it tells you to issue 'info 2' command in bootloader.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
Seriously, if you've CID unlocked and radio flashed your Hermes without reading this far you're probably going to brick your phone sometime soon, so it'll pay to do some more reading before you play too much more.
1.04 vs 1.06 vs 1.09
I've been "burning eyelashes" for the last few days, my Firefox tabs seems like a huge cargo train
One thing i never could understand of all the readings i've made is about the functional advantages on the various bootloaders . Let me explain:
I know 1.04 is the only one that allows radio-only flashes but let's forget all flashing. Let's concentrate on everyday's use.
Does anyone know if 1.06 and 1.09 will make the PDA run better? I mean, if there's a newer ROM that brings bug corrections and new features so i guess that's the same for bootloaders. In this line of thinking 1.09 should do something better than 1.04. If so what is it?
Why i'm making this question? It's because everyone wants to have the best software version for himself uses, so i don't understand why people improve on ROM's, ExtROM and radios but keep a lower version of the bootloader after flashing. Aren't they missing something using 1.04 instead of 1.09?
I have my TyTN only for a week now and i'm looking forward to do things right by reading all that i need to know. So far this is the question that i haven't seen answered.
Cheers everyone,
Evandro
Well...I'm no expert but I'd imagine that you're venturing down the wrong path. I would venture a guess that many of the bootloader revisions have been made solely to enforce increased security or to attempt to prevent hacking or modding of the underlying OS and Radio ROMs.
That was a really great summary and guide. Unfortunately from all the threads and Wikis I have been reading I feel like alot has been changing very fast and I don't fully understand. This guide was great, and I was wondering if the author or anyone else (there are a bunch of guys on here who really know what they are doing) could write an updated (mabey even more detailed/technical) version. I know how to do all the flashing and stuff, but I'm not so confident I know how it's all working, especially the more recent stuff. Mabey including how stuff like the SSPL, hard SPL, mtty, KITL, nbh/nbs, and other more technical methods being used now other than the standard RUUs.
I know almost all of this info is in the forums and the wikis, but it's a little rough to grasp it all when not together. I hope this doesn't upset anyone, I just figured Quentin was gracious enough to do it once mabey he or someone else would want to do it again. If it's too much to ask then just ignore my request. I have been reading the forums for a few months now and think you guys are doing amazing work. You have improved in weeks what it takes MS to build in years and you do it much better. Thank to all and sorry again if I offended anyone by asking this (just really scared to brick my really expensive phone ...lol)
Thanks
Bootloader 1.09 ... no problem!
sn00x said:
Bootloader
Versions
1.04
There is a bug in bootloader 1.04 wich allows you to flash any ROM without a CID check. You have to be in bootloader mode to use this bug.
It's possible to upgrade the RadioROM. You can even flash a patched RadioROM wich is needed to unlock your device.
[*]1.06
The bug from version 1.04 is fixed. Without downgrading to a Shipped ROM with bootloader 1.04 that matches your CID it's not possible to flash a ROM with a different CID.
The RadioROM can't be upgraded. You have to downgrade to bootloader 1.04 to unlock your device.
[*]1.09
You can't downgrade to bootloader 1.04 by flashing a Shipped ROM. However imei-check.co.uk is able to downgrade the bootloader.
There was a solution posted on this forum, but it was stolen from imei-check and was removed. If you are not willing to pay you have to wait until another solution is developed.
The RadioROM can't be upgraded. You have to downgrade to bootloader 1.04 to unlock your device.
Click to expand...
Click to collapse
I think first pages should be updated since the issue regarding 1.09 has been resolved here by the great pof:
http://pof.eslack.org/hermes-unlocker/
http://forum.xda-developers.com/showthread.php?t=293665
Regards
good job..
Ohh yeah baby,
It's been done. They havn't said it has been done, but I assume that it has since I have checked their sice a couple times a week for the past couple of months just waiting for something to be said. They have removed the message about Softbank phones being unable to unlock. So I "ASSSUME" that you can now fully crack your phone with Softbank v1.09. Also for the simle fact that it is version 4 http://www.imei-check.co.uk/M3100v4Unlock.zip of their software instead of version 3. So, now we can crack, our X01HTs, we can downgrade to 1.04, flash with a English rom, then downgrade again to 1.01 and then flash with our custom splash screens.
Imei-check has cracked post December Softbank phones.
www.imei-check.co.uk
-Joe.
Interesting! Anyone tried it? Are you x01ht post december 2nd, able to flash another radio after unlocking?
Success!!
I tried as soon as I saw this post, I had previously bought the IMEI thingy (technically speaking) and realized that my phone was a post Dec. (I originally thought I got it in November, but I realized that I was just an idiot)
anyways a couple minutes later I'm using my Docomo Card on my unlocked Softbank phone.
I'm not gonna lie, it was well worth the $40.
Now, I am not sure if my mail is working. So you guys have any idea about the Docomo mail if that works or not on the Hermes?
pof said:
Interesting! Anyone tried it? Are you x01ht post december 2nd, able to flash another radio after unlocking?
Click to expand...
Click to collapse
Unlocck Success,but unable to flash another radio version.
I tried radio version 1.16 and 1.20,but unable.
pof said:
Interesting! Anyone tried it? Are you x01ht post december 2nd, able to flash another radio after unlocking?
Click to expand...
Click to collapse
I tried too.
This version can unlock sim, but but can not unlock ExtROM.
Radio can not upgrade, can not flash another radio.
keiuchid said:
I tried too.
This version can unlock sim, but but can not unlock ExtROM.
Radio can not upgrade, can not flash another radio.
Click to expand...
Click to collapse
guys Congratulations!
the solution has came to you <fortunately not by me
But please pay attention to flash another ROM on Unlocked X01HT.
it eazy lost GSM ROM while you flash ROM on that.
<not all of them, but very highly possibility of this problem>
*Problem of no-Radio rom(by Pof)
http://forum.xda-developers.com/showthread.php?t=286755
i also killed 3 hermes already, so i hope you all pay attention of this.
*My dead hermes;
http://asukal.net/blog/2007/01/hermse.html
(i meant "this problem is not coze of UK IMEI Unlocker", it will be happen on another hermes too)
My X01HT orignal version is spl1.09, now i have downgraded to1.04,and flash Dopoda ROM(1.04),so can i unolock my H01HT with M3100v4unlock?and will it be blocked?
Asukal said:
guys Congratulations!
the solution has came to you <fortunately not by me
But please pay attention to flash another ROM on Unlocked X01HT.
it eazy lost GSM ROM while you flash ROM on that.
<not all of them, but very highly possibility of this problem>
*Problem of no-Radio rom(by Pof)
http://forum.xda-developers.com/showthread.php?t=286755
i also killed 3 hermes already, so i hope you all pay attention of this.
*My dead hermes;
http://asukal.net/blog/2007/01/hermse.html
(i didnt mean this probelem is not coze of UK IMEI Unlocker, it will be happen on another hermes too)
Click to expand...
Click to collapse
Thank you your attention.
I don't flash other rom, only use unlocked this.
somatom said:
My X01HT orignal version is spl1.09, now i have downgraded to1.04,and flash Dopoda ROM(1.04),so can i unolock my H01HT with M3100v4unlock?and will it be blocked?
Click to expand...
Click to collapse
I also have the same situation, will it be able to unlock if mine is downgraded to 1.04 and flashed HK rom.
doitfu said:
Unlocck Success,but unable to flash another radio version.
I tried radio version 1.16 and 1.20,but unable.
Click to expand...
Click to collapse
They say as follows;
(1)
How do upgrade other radios:
Unlock using v4b unlocker. Upgrade again to the X01HT 1.09 rom. Now flash the phone with a COMPLETE rom (for example cingular 1.24 or imate ). Now the radio will be changed to something else. YOU MUST flash a full rom on a 1.09 so your radio it be flashing too.
(2)
ok again. PRIOR to flashing NEW RADIO ROM you have to upgrade to bootloader SPL1.09. You DO NOT NEED to run the unlocker again. Your phone has to show SPL1.09 when you run the ROM update with the radio of your choice.
Extended ROMs are EMBEDDED in the firmware update. Any access from WindowsCE to this ROM has nothing to do with SIM or CIDunlock.
So solution:
1) Update to bootloader SPL 1.09
2) Then run the update with radio firmware you like
NOTE: DO NOT RUN THE UNLOCKER AGAIN! Then it will work.
keiuchid said:
They say as follows;
(1)
How do upgrade other radios:
Unlock using v4b unlocker. Upgrade again to the X01HT 1.09 rom. Now flash the phone with a COMPLETE rom (for example cingular 1.24 or imate ). Now the radio will be changed to something else. YOU MUST flash a full rom on a 1.09 so your radio it be flashing too.
(2)
ok again. PRIOR to flashing NEW RADIO ROM you have to upgrade to bootloader SPL1.09. You DO NOT NEED to run the unlocker again. Your phone has to show SPL1.09 when you run the ROM update with the radio of your choice.
Extended ROMs are EMBEDDED in the firmware update. Any access from WindowsCE to this ROM has nothing to do with SIM or CIDunlock.
So solution:
1) Update to bootloader SPL 1.09
2) Then run the update with radio firmware you like
NOTE: DO NOT RUN THE UNLOCKER AGAIN! Then it will work.
Click to expand...
Click to collapse
i don't fully understand you. are you saying imei-check says;
1) you can actually change radio rom 1.14 on x01ht?
2) you need to have bootloader 1.09 (by burning a full rom that includes bootloader 1.09 first) to burn a rom from different companies? after unlocking??
3) you should not use the unlocker more than once?
we'd appreciate if you could give us a clearer idea about the process. thanks.
keiuchid,
Same here. I don't understand what the process is. If "they" means imei-check and if you have their written response on the process, please copy that and paste it in your reply here. It doesn't matter if it's long.
somatom said:
My X01HT orignal version is spl1.09, now i have downgraded to1.04,and flash Dopoda ROM(1.04),so can i unolock my H01HT with M3100v4unlock?and will it be blocked?
Click to expand...
Click to collapse
OK, got their reply.....it can be UNLOCKED even you downgraded to 1.04 and flashed different rom
mj13 said:
OK, got their reply.....it can be UNLOCKED even you downgraded to 1.04 and flashed different rom
Click to expand...
Click to collapse
It's ok , i have bought the unlocker,it absolutely works on my X01HT.so i enjoy it now.
qtotter said:
i don't fully understand you. are you saying imei-check says;
1) you can actually change radio rom 1.14 on x01ht?
2) you need to have bootloader 1.09 (by burning a full rom that includes bootloader 1.09 first) to burn a rom from different companies? after unlocking??
3) you should not use the unlocker more than once?
we'd appreciate if you could give us a clearer idea about the process. thanks.
Click to expand...
Click to collapse
My english is very poor, sorry.
The message that I posted was imei-check's reply.
(1) I can not change radio rom 1.14 on x01ht, so I can not understand imei-check's reply.(They said that could change rom)
(2) I only used x01ht upgrade rom.
(3) Yes.
keiuchid said:
My english is very poor, sorry.
The message that I posted was imei-check's reply.
(1) I can not change radio rom 1.14 on x01ht, so I can not understand imei-check's reply.(They said that could change rom)
(2) I only used x01ht upgrade rom.
(3) Yes.
Click to expand...
Click to collapse
To upgrade radio on a new "1.14.00.10 radio":
First unlock the device with v4b unlocker.
After unlocked ok, upgrade AGAIN to the SB firmware so the 1.09 bootloader back in place.
Now flash the device with a FULL original HTC Hermes firmware (for example cingular full firmware) and now the radio will be flashed to a different one.
IF bootloader is NOT showing SPL1.09 the radio it will NOT be flashed when you do the flash upgrade!!!
keiuchid said:
They say as follows;
(1)
How do upgrade other radios:
Unlock using v4b unlocker. Upgrade again to the X01HT 1.09 rom. Now flash the phone with a COMPLETE rom (for example cingular 1.24 or imate ). Now the radio will be changed to something else. YOU MUST flash a full rom on a 1.09 so your radio it be flashing too.
(2)
ok again. PRIOR to flashing NEW RADIO ROM you have to upgrade to bootloader SPL1.09. You DO NOT NEED to run the unlocker again. Your phone has to show SPL1.09 when you run the ROM update with the radio of your choice.
Extended ROMs are EMBEDDED in the firmware update. Any access from WindowsCE to this ROM has nothing to do with SIM or CIDunlock.
So solution:
1) Update to bootloader SPL 1.09
2) Then run the update with radio firmware you like
NOTE: DO NOT RUN THE UNLOCKER AGAIN! Then it will work.
Click to expand...
Click to collapse
Thank you. But it is not unable to flash another radio rom.
I downgladed SPL from 1.09 to 1.04 for myself first,changed to a DOCOMO ROM.
And succeeded unlock to use M3100v4Unlock.exe.
However, the radio was unable to flash another radio rom.
Then,I read this advice,flashed a New Softbank Rom.
It was no lock.
However,can not run MaUpgradeUt_noID.exe.
Unable to flash radio rom.
I think because SPL is 1.09.
Then,M3100v4Unlock.exe was made to run again.
When it used this tool, it became automaticaly SPL to downglade to SPL1.04.
I can run MaUpgradeUt_noID.exe.
But, it is not unable to flash ...
doitfu said:
Thank you. But it is not unable to flash another radio rom.
I downgladed SPL from 1.09 to 1.04 for myself first,changed to a DOCOMO ROM.
And succeeded unlock to use M3100v4Unlock.exe.
However, the radio was unable to flash another radio rom.
Then,I read this advice,flashed a New Softbank Rom.
It was no lock.
However,can not run MaUpgradeUt_noID.exe.
Unable to flash radio rom.
I think because SPL is 1.09.
Then,M3100v4Unlock.exe was made to run again.
When it used this tool, it became automaticaly SPL to downglade to SPL1.04.
I can run MaUpgradeUt_noID.exe.
But, it is not unable to flash ...
Click to expand...
Click to collapse
I also can not do.
My x01ht is before 12.2, so can not do ?
mj13 said:
To upgrade radio on a new "1.14.00.10 radio":
First unlock the device with v4b unlocker.
After unlocked ok, upgrade AGAIN to the SB firmware so the 1.09 bootloader back in place.
Now flash the device with a FULL original HTC Hermes firmware (for example cingular full firmware) and now the radio will be flashed to a different one.
IF bootloader is NOT showing SPL1.09 the radio it will NOT be flashed when you do the flash upgrade!!!
Click to expand...
Click to collapse
It finally succeeded.
Thanks a lot.
Hi all.
My Softbank has b/l 1.04 and the 1.14.00.10 radio on it. To use this method,which rom do I use for the 1.09 b/l? I looked at wiki,and the only one was a Japanese version for softbank. It does not match my Softbank, so I am not real sure which way to go. Is there a Dopod rom with the 1.09 b/l?
BTW.....My Sb is an HERM200 with the Dopod splash screen and was shipped with the Dopod 1.23.707.4 WWE Rom, IPL 1.01,B/L 1.04, and the dreaded 1.14.00.10 radio on it.
Thanks................Later
I have been reading all across the forums how to CID unlock, upgrade etc. However, I am not able to find the ways to do seeminly essential homework before trying to upgrade. These for me are:-
* Finding a way to completely backup all the stuff from original tytn. Like ROM, SPL, IPL, Radio, CIDlock etc. I feel that this is important as if ever I feel like going to the tried old one I should be able to and to preserve the warranty also. Also, the method to roll back if needed. This should be covering re CID locking the phone etc.
It makes sense to create a way to bring the phone to its completlely original shape if we need it
Thanks
Alber
alber786 said:
I have been reading all across the forums how to CID unlock, upgrade etc. However, I am not able to find the ways to do seeminly essential homework before trying to upgrade. These for me are:-
* Finding a way to completely backup all the stuff from original tytn. Like ROM, SPL, IPL, Radio, CIDlock etc. I feel that this is important as if ever I feel like going to the tried old one I should be able to and to preserve the warranty also. Also, the method to roll back if needed. This should be covering re CID locking the phone etc.
It makes sense to create a way to bring the phone to its completlely original shape if we need it
Thanks
Alber
Click to expand...
Click to collapse
You do not need to back up your spl, ipl, etc. because if you need to roll back you can just reflash them on, and they can be found around here and in the wiki.
You cannot un-CIDunlock, but if you use hardspl v7 it will "trick" your phone into thinking it is (when in reality it isnt) so that you do not have to actually unlock it. If you ever need to send it in you can just flash the old spl over it.
mcorrie1121 said:
You do not need to back up your spl, ipl, etc. because if you need to roll back you can just reflash them on, and they can be found around here and in the wiki.
You cannot un-CIDunlock, but if you use hardspl v7 it will "trick" your phone into thinking it is (when in reality it isnt) so that you do not have to actually unlock it. If you ever need to send it in you can just flash the old spl over it.
Click to expand...
Click to collapse
So you mean that hardspl doesnt CID unlock it? But isnt there really a way to extract the original components and then put them back again ?
thanks
Alber
alber786 said:
So you mean that hardspl doesnt CID unlock it? But isnt there really a way to extract the original components and then put them back again ?
thanks
Alber
Click to expand...
Click to collapse
HardSPL does not CID unlock. pof's Free Unlocker (a sticky thread) does the SIM and CID unlocking. HardSPL is a new set of bootloaders allowing upgrade utilities to access and read/write to the phone. The most important aspect of this (besides bypassing the CID check) is the security - it has some overwrite protection built in to prevent you from accidentally corrupting the bootloader area, rendering your phone a brick. HardSPL is a safety measure.
If you check THE WIKI here on xda for the Hermes, you will find some stuff on extracting. It is most probable that it will be FAR easier to find new versions of everything you have, rather than trying to back up and restore. The wiki contains MANY shipped ROMs to allow you to restore back to basically the original condition. LOOK HERE for MW5 shipped ROMs and LOOK HERE for WM6 shipped ROMs.
todd_jg said:
HardSPL does not CID unlock. pof's Free Unlocker (a sticky thread) does the SIM and CID unlocking. HardSPL is a new set of bootloaders allowing upgrade utilities to access and read/write to the phone. The most important aspect of this (besides bypassing the CID check) is the security - it has some overwrite protection built in to prevent you from accidentally corrupting the bootloader area, rendering your phone a brick. HardSPL is a safety measure.
If you check THE WIKI here on xda for the Hermes, you will find some stuff on extracting. It is most probable that it will be FAR easier to find new versions of everything you have, rather than trying to back up and restore. The wiki contains MANY shipped ROMs to allow you to restore back to basically the original condition. LOOK HERE for MW5 shipped ROMs and LOOK HERE for WM6 shipped ROMs.
Click to expand...
Click to collapse
what about the radio upgrade
the htc108 thing
its confusing
on pof's sticky it says to downgrade the radio if u have the htc 108..
but on the radio upgrade sticky, it says u can upgrade any phone[hermes] using custom ruu..
todd_jg said:
HardSPL does not CID unlock. pof's Free Unlocker (a sticky thread) does the SIM and CID unlocking. HardSPL is a new set of bootloaders allowing upgrade utilities to access and read/write to the phone. The most important aspect of this (besides bypassing the CID check) is the security - it has some overwrite protection built in to prevent you from accidentally corrupting the bootloader area, rendering your phone a brick. HardSPL is a safety measure.
If you check THE WIKI here on xda for the Hermes, you will find some stuff on extracting. It is most probable that it will be FAR easier to find new versions of everything you have, rather than trying to back up and restore. The wiki contains MANY shipped ROMs to allow you to restore back to basically the original condition. LOOK HERE for MW5 shipped ROMs and LOOK HERE for WM6 shipped ROMs.
Click to expand...
Click to collapse
Thanks a lot for the reply, I appreciate the time you spent in expaining this to me and providing these links.
I was wondering if HARDSPL is like shelltool where it will only allow upgrade or flashing of OS part. So, once I use the HARDSPL and flash say HTC official WM6 release or Dopod WM6, will I be ableto to get the bundled radio and SPL and IPL upgrades from these ROMS? and if yes then will HARDSPL get replaced by these SPLs and IPLs built into the ROMS? One more thing, will an upgrade like that can brick the phone as if I rum the official ROM it will try to upgrade the SPL and IPL (I am not sure).
What is the preferred way of upgrading ? unlocking CID by the tool or HARDSPL ?
I have read somewhere that lockwiz tool used for Wizard can save CID also and some tool and put it back also but I dont know how and if the same tool can do it for hermes?
Regards,
Alber
alber786 said:
Thanks a lot for the reply, I appreciate the time you spent in expaining this to me and providing these links.
I was wondering if HARDSPL is like shelltool where it will only allow upgrade or flashing of OS part. So, once I use the HARDSPL and flash say HTC official WM6 release or Dopod WM6, will I be ableto to get the bundled radio and SPL and IPL upgrades from these ROMS? and if yes then will HARDSPL get replaced by these SPLs and IPLs built into the ROMS? One more thing, will an upgrade like that can brick the phone as if I rum the official ROM it will try to upgrade the SPL and IPL (I am not sure).
What is the preferred way of upgrading ? unlocking CID by the tool or HARDSPL ?
I have read somewhere that lockwiz tool used for Wizard can save CID also and some tool and put it back also but I dont know how and if the same tool can do it for hermes?
Regards,
Alber
Click to expand...
Click to collapse
Most cooked roms are os only, but a few have a radio, etc. included. If its os only, flashing will only change the os. You can separately flash radio.
Hardspl is the best because its reversible. Well thats not the best word to describe it....id say because its not permanent. But u know what i mean
alber786 said:
Thanks a lot for the reply, I appreciate the time you spent in expaining this to me and providing these links.
I was wondering if HARDSPL is like shelltool where it will only allow upgrade or flashing of OS part. So, once I use the HARDSPL and flash say HTC official WM6 release or Dopod WM6, will I be ableto to get the bundled radio and SPL and IPL upgrades from these ROMS? and if yes then will HARDSPL get replaced by these SPLs and IPLs built into the ROMS? One more thing, will an upgrade like that can brick the phone as if I rum the official ROM it will try to upgrade the SPL and IPL (I am not sure).
What is the preferred way of upgrading ? unlocking CID by the tool or HARDSPL ?
I have read somewhere that lockwiz tool used for Wizard can save CID also and some tool and put it back also but I dont know how and if the same tool can do it for hermes?
Regards,
Alber
Click to expand...
Click to collapse
Mcorrie1121 is right. I will add a couple of things.
1. HardSPL is not *necessary* for flashing anything, it only makes it safer and allows you to flash ROMs with CIDs that do not match your device without CID unlocking. Your ROM is basically a few parts - OS, Radio, IPL, SPL, ExtROM, MainSplash and SubSplash. The HardSPL will replace the SPL only. Most non-carrier ROM releases are OS only. Most carrier ROMs (as you pointed out) have ALL of these things. As Mcorrie1121 pointed out, you can easily find a radio - check the wiki, search, etc.
2. Once you have upgraded to a cooked ROM (and HardSPL), you will still be able to upgrade to a Shipped Official ROM. You may need to "unpack" it and use the CustomRUU instead of the shipped updater. That is OK though.
3. HardSPL will not allow overwriting of the IPL/SPL except by another HardSPL (see mrvanx.org downgrade guides). You will not have a problem. It will keep your bootloader zone safe.
4. I don't think there is a preferred way. Some people unlock CID, others do not. There is no reason to *not* unlock it, unless you plan to send it back - and I have never heard of someone getting service rejected for this reason. Wring ROM, yes. CID unlocked, no. That said, maybe try without CID unlocking first and then if you find you need to do it for some reason, then do it. You really do not have to do it, since the Custom Updater bypasses the CID check anyway.
5. Regarding the 0108 Radio BL issue, don't worry much about that - it is an old problem. Just don't go below whatever version you have now.
todd_jg said:
Mcorrie1121 is right. I will add a couple of things.
1. HardSPL is not *necessary* for flashing anything, it only makes it safer and allows you to flash ROMs with CIDs that do not match your device without CID unlocking. Your ROM is basically a few parts - OS, Radio, IPL, SPL, ExtROM, MainSplash and SubSplash. The HardSPL will replace the SPL only. Most non-carrier ROM releases are OS only. Most carrier ROMs (as you pointed out) have ALL of these things. As Mcorrie1121 pointed out, you can easily find a radio - check the wiki, search, etc.
2. Once you have upgraded to a cooked ROM (and HardSPL), you will still be able to upgrade to a Shipped Official ROM. You may need to "unpack" it and use the CustomRUU instead of the shipped updater. That is OK though.
3. HardSPL will not allow overwriting of the IPL/SPL except by another HardSPL (see mrvanx.org downgrade guides). You will not have a problem. It will keep your bootloader zone safe.
4. I don't think there is a preferred way. Some people unlock CID, others do not. There is no reason to *not* unlock it, unless you plan to send it back - and I have never heard of someone getting service rejected for this reason. Wring ROM, yes. CID unlocked, no. That said, maybe try without CID unlocking first and then if you find you need to do it for some reason, then do it. You really do not have to do it, since the Custom Updater bypasses the CID check anyway.
5. Regarding the 0108 Radio BL issue, don't worry much about that - it is an old problem. Just don't go below whatever version you have now.
Click to expand...
Click to collapse
Thanks, I appreciate your help. Please tell me if I can put back WM5 back on it after upgrading.
Regards,
Alber
todd_jg said:
Mcorrie1121 is right. I will add a couple of things.
1. HardSPL is not *necessary* for flashing anything, it only makes it safer and allows you to flash ROMs with CIDs that do not match your device without CID unlocking. Your ROM is basically a few parts - OS, Radio, IPL, SPL, ExtROM, MainSplash and SubSplash. The HardSPL will replace the SPL only. Most non-carrier ROM releases are OS only. Most carrier ROMs (as you pointed out) have ALL of these things. As Mcorrie1121 pointed out, you can easily find a radio - check the wiki, search, etc.
2. Once you have upgraded to a cooked ROM (and HardSPL), you will still be able to upgrade to a Shipped Official ROM. You may need to "unpack" it and use the CustomRUU instead of the shipped updater. That is OK though.
3. HardSPL will not allow overwriting of the IPL/SPL except by another HardSPL (see mrvanx.org downgrade guides). You will not have a problem. It will keep your bootloader zone safe.
4. I don't think there is a preferred way. Some people unlock CID, others do not. There is no reason to *not* unlock it, unless you plan to send it back - and I have never heard of someone getting service rejected for this reason. Wring ROM, yes. CID unlocked, no. That said, maybe try without CID unlocking first and then if you find you need to do it for some reason, then do it. You really do not have to do it, since the Custom Updater bypasses the CID check anyway.
5. Regarding the 0108 Radio BL issue, don't worry much about that - it is an old problem. Just don't go below whatever version you have now.
Click to expand...
Click to collapse
Dear, please help me with one thing-I am terribly confused about the procedure to upgrade my JASJAM to WM6. I understand that one way is to CIS unlock it and install on it the official and dopod releases of WM6. I wanted to know how can I do the same using the HARDspl. I know that I can install the HARDSPL but after that what ??? Can I then run the offcial RUU from HTC or Dopod or I am supposed to do it some other way as I am afraid that it may contain the SPL and IPL and can break by phone OR I have to use some customRUU (I dont know) OR I am supposed to extract the OS from these official releases (I dont know how) OR ..
Can you please clear these confusion??
I have:-
* I-Mate JASJAM, CID locked i suppose as when I run official HTC or dopod it says this update utility is not for this
*I really wanted to save my devices complete state and a way to revert it to the way it was like SPL, IPL, OS, Radio, CID lock etc.
PLS pls help
Regards,
Alber
alber786 said:
Dear, please help me with one thing-I am terribly confused about the procedure to upgrade my JASJAM to WM6. I understand that one way is to CIS unlock it and install on it the official and dopod releases of WM6. I wanted to know how can I do the same using the HARDspl. I know that I can install the HARDSPL but after that what ??? Can I then run the offcial RUU from HTC or Dopod or I am supposed to do it some other way as I am afraid that it may contain the SPL and IPL and can break by phone OR I have to use some customRUU (I dont know) OR I am supposed to extract the OS from these official releases (I dont know how) OR ..
Can you please clear these confusion??
I have:-
* I-Mate JASJAM, CID locked i suppose as when I run official HTC or dopod it says this update utility is not for this
*I really wanted to save my devices complete state and a way to revert it to the way it was like SPL, IPL, OS, Radio, CID lock etc.
PLS pls help
Regards,
Alber
Click to expand...
Click to collapse
CLICK THIS LINK
There are upgrade guides there and guides to put it back the way it was (OS, Radio, IPL, SPL, MainSplash and SubSplash) - it is all covered.
The upgrade guides will get you through the upgrade process. The only thing you need to do after that to use an official upgrade is to unrar (using winrar or something) the executable file and take the nbh and us it with the CustomRUU, which can be found HERE .