Himupgradeit can't see my device. It gives information that it upgrades to such version (2.06), but what current version it doesn't show. Also native ROM upgrader displays information about current version and upgrades significantly. I tried 2 ROMs and no one can't see my PPC except native one
mente said:
Himupgradeit can't see my device. It gives information that it upgrades to such version (2.06), but what current version it doesn't show. Also native ROM upgrader displays information about current version and upgrades significantly. I tried 2 ROMs and no one can't see my PPC except native one
Click to expand...
Click to collapse
When you upgrade, you know (normally) what's the actual version on your pda, so who cares if the himaupgrad... doesn't show it. All you want is to do the upgrade, so do it!
BTW, what do you mean by "no one can see my PPC", if you have a RUUlog.log file containing on first line : "hh:mm:ss Connection with USB", then you know that it sees your PPC.
Cheers,
.Fred
You see, it's not the only one problem. Also when I press Update it displays me progressbar, but nothing continues. Then the error displays without any number - just can't connect. The native firmware upgrades normally.
P.S. Sorry for my ugly English
mente said:
You see, it's not the only one problem. Also when I press Update it displays me progressbar, but nothing continues. Then the error displays without any number - just can't connect. The native firmware upgrades normally.
P.S. Sorry for my ugly English
Click to expand...
Click to collapse
Allright, did you put your ppc in bootloader mode ?
Press Power button and DPad together and when pushing put the stylus in the reset hole. Normally your screen should become black, you should see Serial appear and a number like 1.06
If you have that, kill ActiveSync processes running on your pc then put the ppc in its craddle, Serial should become now USB. Launch the Himaupgra...
Cheers,
.Fred
Thanks, it works. I didn't know, that I need to put in bootloader mode
mente said:
Thanks, it works. I didn't know, that I need to put in bootloader mode
Click to expand...
Click to collapse
Always read the instructions before doing an upgrade. If you don't you could damage your ppc and have a dead one.
Cheers,
.Fred
Thanks. One more question. What version of 03Se better to install? I have downloaded 2.06 XDA2 version. It writes me, that I have wrong model
mente said:
Thanks. One more question. What version of 03Se better to install? I have downloaded 2.06 XDA2 version. It writes me, that I have wrong model
Click to expand...
Click to collapse
Good question! But I think this one should work:
ftp://xda:[email protected]/Himalaya_SEs/Himalaya_SE_2.06.00_Imate/
And I would take the Extrom xda2jojo.v3.2zt from great xda2jojo!
Cheers,
.Fred
Thanks, but where I can find tips how to install? I suppose each version of 03se needs different type of installing
mente said:
Thanks, but where I can find tips how to install? I suppose each version of 03se needs different type of installing
Click to expand...
Click to collapse
There is a big difference when you upgrade from WM2k3 to WM2k5 or downgrade from WM2k5 to WM2k3 but between same OS, nothing changes!
Cheers,
.Fred
So just launch himupdate?
One of the archives which links you gave me is broken
Related
I want to upgreade my ROM, but I keep on getting a country error, i've tried doingt he coutntry code hack, but it still gives me the same error!
Help me please?
ROM version : 1.60.00WWE
Rom Date : 12/03/03
Radio version : 1.06.01
Protocol Version : 1337.16
ExtROM version : 1.60.06
Help would be greatly appreciated.
Thanks in advance
Uh, i would really need someone to show me how to do it, I'm still very new at this.. thanks
I found that the instructions on the wiki, using itsme's tools work for me. ER2003edit doesn't reliably change the country code for me.
Remember to pick the right country code for your device, and to re-encrypt the files.
wfberg said:
I found that the instructions on the wiki, using itsme's tools work for me. ER2003edit doesn't reliably change the country code for me.
Remember to pick the right country code for your device, and to re-encrypt the files.
Click to expand...
Click to collapse
It's me? Where do I find it?
Now I am in trouble
I tried upgrading it, I thought it worked now it's stuck in bootloader mode...
Please help me!
i tried upgrading it, the country error is back and my unit keeps on displaying Serial 1.02
HElp!
See if it says "USB" when it's in the cradle (with the computer on, etc.)
Then, just run the upgrade again.
Remember though, flashing ROMs is dangerous.
wfberg said:
See if it says "USB" when it's in the cradle (with the computer on, etc.)
Then, just run the upgrade again.
Remember though, flashing ROMs is dangerous.
Click to expand...
Click to collapse
Now you tell me
Anyway, I finally got it working, I will be more careful in falshing ROMs in the future...
Thanksfor all your help
Deadman said:
wfberg said:
See if it says "USB" when it's in the cradle (with the computer on, etc.)
Then, just run the upgrade again.
Remember though, flashing ROMs is dangerous.
Click to expand...
Click to collapse
Now you tell me
Click to expand...
Click to collapse
I wised up and put that piece of information in my signature ;-)
Hey guys, ive been reading many threads regarding issues with the sx56, but after going through most of them, it seems ive been left with more questions. Anyway, my problem is , first of all the reception sucks, signals drop every now and then and i hate saying "sorry? ur breaking up" now from what ive learnt so far from most of the posts is that this "signal" issue is due to the radio stack. My siemens sx56 is running:
Windows Mobile Pocket PC 2003
Model No.: PW10B1
ROM version : A.30.09.ENG
ROM date : 01/01/04
Radio Version : A.33.02
Protocol Version : 1.3.3
now, i have been thinking that maybe i should try downgrading the radio stack while still using ppc2003 , but ive seen many posts in which people have bricked their phones due to downgrade.
Another thing is i forgot what was the default radio version before the ppc2003 upgrade (as i think the signal strength was somewhat better prior to this upgrade) So just to be on the safe side, could any of you recommend me which radio stacks i can use? the ones i see on LumpiStefans site are:
RSU Version 3.23
RSU Version 4.16
RSU Version 4.21
RSU Version A20.10
RSU Version 6.24.20
RSU Version 6.25.02
from what i have figured the A20.10 might be the one which was originally installed in the phone when it came with ppc2002 just a guess since there are no other versions above which has an A in the start.But would downgrading kill my phone?
Now the next problem is the volume problem, that INCREASING ring is quite stupid, ive tried disabling the PDA volume and let the phone volume on full, the increasing ring problem goes away but it raises another problem of JUST ONE RING thats it, it just doesnt keep on ringing, just rings once and then goes silent. Do tell me if this is also a radio stack problem or is there any solution for it.
And yeah , finally, is windows mobile 5.0 any good? is it better than the windows mobile pocket pc 2003? and will it work on the sx56? in fact, are there any other OS besides ppc2002-ppc2003 which would work on sx56?
Thanks.
snakey said:
Another thing is i forgot what was the default radio version before the ppc2003 upgrade (as i think the signal strength was somewhat better prior to this upgrade) So just to be on the safe side, could any of you recommend me which radio stacks i can use? the ones i see on LumpiStefans site are:
RSU Version 3.23
RSU Version 4.16
RSU Version 4.21
RSU Version A20.10
RSU Version 6.24.20
RSU Version 6.25.02
from what i have figured the A20.10 might be the one which was originally installed in the phone when it came with ppc2002 just a guess since there are no other versions above which has an A in the start.But would downgrading kill my phone?
Click to expand...
Click to collapse
The A20.10 and the 6.xx Version should work on your phone, cause it's a PW10B-Model....
Flashing of Radio Stack is everytime little bit danderous like all flashing.
If the process doing fine, there should be no problem. I would do removing the sim and doing a hardreset before flashing the radiostack....
snakey said:
Now the next problem is the volume problem, that INCREASING ring is quite stupid, ive tried disabling the PDA volume and let the phone volume on full, the increasing ring problem goes away but it raises another problem of JUST ONE RING thats it, it just doesnt keep on ringing, just rings once and then goes silent. Do tell me if this is also a radio stack problem or is there any solution for it.
Click to expand...
Click to collapse
This is an issue of the A30.0x ROMs. If you're going to use the 4.01.12 then there won't be the increasing sound problem.....
snakey said:
And yeah , finally, is windows mobile 5.0 any good? is it better than the windows mobile pocket pc 2003? and will it work on the sx56? in fact, are there any other OS besides ppc2002-ppc2003 which would work on sx56?
Click to expand...
Click to collapse
There is no WM 5.0 available for the Wallaby devices. Newest, but in my eyes really buggy ROM Version is WM2003 Second Edition....
Only othe rOS running on the Wallaby is Linux, but until now it's not running as complete, as you can use your phone and all the other functions....
Stefan
thank u for the reply stefan! just a few more quick questions:
1. How do i soft/hard reset? iam sorry iam new to pocket pc's.
2. The ROM u mentioned ,4.01.12, does it have any bugs i should be aware of?
3.Which radio stack do you think is better? the 6.xx or A20.10?
4.How do i install the radio stack and the rom? i downloaded the radio stack ZIP file and the rom is being downloaded. The radio stack zip file has no WIN32 executable file. Do i need to copy it over the phone ? how?
5. Should i install the rom first or the radio stack?
Thanks.
1. Softreset is pushing your stylus once in the little hole on the left side at the bottom.
For Hardreset you have to unscrew your stylus and push twice in the very little hole on the right side at the bottom.
2. The 4.01.12 has like all other WM2003 for the Wallaby the problem that under certain circumstands the sd-card will be formatted. I have used WM2003 for about 2 weeks and had this problem once.
3. Don't know which one is better. Never used one of them cause i have a PW10A-Model
4. You have to put the files in one folder on your SX56 and run the exe directly on the device. Pay Attention to have enough power....
5. It depends on you.....
Stefan
ok this is weird... i upgraded my rom to 4.01.12, after the O2 Screen, normal setup procedure comes.. the thing which bothered me was when i clicked on DEVICE INFORMATION..it is now showing model PW10A-MODEL whereas its a PW10B model,says so on the sticker, and the radio stack is still A.33.02 :S
its working though signal problems are still there... i tried the A20.10 and 6.xxx radio stack versions but they dont wanna upgrade , they give messages like "upgrade failed or retry". Should i try other RSU versions like 4.21??
or maybe i need to try that sd-bootloader method? if so, how?
ok you can ignore my previous post about radio stack, i guess i found the solution.
Radio stack upgrade only works if you copy the 4 files of any radio stack archive to the WINDOWS ROOT FOLDER OF YOUR WALLABY DEVICE!
copying to a seprate folder or anywhere else results in 1% hangup or upgrade failed messages. IT ONLY WORKS WHEN YOU COPY THE FILES TO THE WINDOWS ROOT FOLDER OF THE DEVICE . I just upgraded the radio stack to 6.24.00, lets see if it solves my the problem of bad and breaking up signals.
I still havent found out why my wallaby shows PW10A though :roll:
snakey said:
WINDOWS ROOT FOLDER OF YOUR WALLABY DEVICE!
Click to expand...
Click to collapse
Could you specify Windows root folder?
is it \Windows\ or just \ ??????
snakey said:
I still havent found out why my wallaby shows PW10A though :roll:
Click to expand...
Click to collapse
This depends on the ROM used. PW10A is static in the ROM. If you want it, I'm sure I can make a ROM where it's Type is PW10F .....
Stefan
its the \WINDOWS folder.
And the ROM i used was 4.01.12.
By the way, that 6.24.00 RSU kicks butt! havent came across any signal problems at all. Thanks a lot stefan! this forum rules! :lol:
and do let me know about this model version problem, do i need to install any other ROM which will display the correct model version i.e PW10B ??
Got fustrated
I hat the 4.01.16 ROm with 6.02 RSU, I've tryed to upgrade to 6.25.02, copy all files to Windows and the Upgrade to startup, but I kept at 1%, do a reset and after 10 minutes I got an error, now my phone is off, I cannot turned on, in settings I still had version 6.02 of RSU, If I use the Phone icon in Control Panel it says the fhone is off, turn it on and try again and there's the wait icon in the windows.
How can I restore my settings?, perhaps I tryied to updagre with poor storage space, the MS Voice Command eated allmost all RAM and I had to increase it, also I left the SIM while upgrading, any help will be wellcome.
Re: Got fustrated
WhiteWizard said:
I hat the 4.01.16 ROm with 6.02 RSU, I've tryed to upgrade to 6.25.02, copy all files to Windows and the Upgrade to startup, but I kept at 1%, do a reset and after 10 minutes I got an error, now my phone is off, I cannot turned on, in settings I still had version 6.02 of RSU, If I use the Phone icon in Control Panel it says the fhone is off, turn it on and try again and there's the wait icon in the windows.
How can I restore my settings?, perhaps I tryied to updagre with poor storage space, the MS Voice Command eated allmost all RAM and I had to increase it, also I left the SIM while upgrading, any help will be wellcome.
Click to expand...
Click to collapse
please let me know if you find the solution...I have the same problem
Thanks
Yes
Yes, The solution was to put all files on the windows folder and execute the update program from that location, the procedure continues to 100%, and then, I think it reset my machinne, and when it boot again I got the new RSU installed and the phone was able to turn on again, automatically.
Good Luck
Re: Yes
WhiteWizard said:
Yes, The solution was to put all files on the windows folder and execute the update program from that location, the procedure continues to 100%, and then, I think it reset my machinne, and when it boot again I got the new RSU installed and the phone was able to turn on again, automatically.
Good Luck
Click to expand...
Click to collapse
can you tell me whcih version of RSU you used?
I have PW10B1 model and I load the XDA-Developers ROM Version 1.1 but I still have problems with RSU..I tried almost all RSU from ftp://ftp.xda-developers.com/Wallaby/ but no succees...
if you have the same model maybe you can send me by email your RSU version...please!
my email is [email protected]oo.com
I have 6.25.02
I'm using the 6.25.02 version, the very same files that had failed with then 1% problem, the trick was no to put anything in the starup folder, do not soft reset before the procedure.
Simply navigate to your Windows folder with any file explorer and execute the update program. Give it time to finish, ensure that the procedure reach 100%.
Good Luck
Re: I have 6.25.02
WhiteWizard said:
I'm using the 6.25.02 version, the very same files that had failed with then 1% problem, the trick was no to put anything in the starup folder, do not soft reset before the procedure.
Simply navigate to your Windows folder with any file explorer and execute the update program. Give it time to finish, ensure that the procedure reach 100%.
Good Luck
Click to expand...
Click to collapse
I just did this but when I'm starting at 1% the status bar is disappearing and it seems that is doing nothing...is this normal?
Did you had the status bar until 100%?
Perhaps you have a wrong ROM for that RSU
Remember that you must have the rigth ROM for a given RSU, all Win2003 require RSU version 6.x, if you hace downgraded the ROM you'll need an older RSU.
Sorry
Yes, I saw my status bar reach 10%, 20% and so on, ultil it reach 100%
Re: Perhaps you have a wrong ROM for that RSU
WhiteWizard said:
Remember that you must have the rigth ROM for a given RSU, all Win2003 require RSU version 6.x, if you hace downgraded the ROM you'll need an older RSU.
Click to expand...
Click to collapse
here is written tu use for their ROM, XDA-Developers ROM Version 1.1, and PW10B-Model RSU Version 6.24.20 ....but is not working with this also (...
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Can anone tell me how i could unlock my wallaby lock on T-mobile?
i have already upgraded the ROM to 4.01.12
and radio to 4.21.00
protocol version is 32S54... but get Unlock Code screen everytime i insert my simcard...
please please please, im begging.... i read one article explaining about SpecialEditionROM but the link is dead... any option pls.???
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
T-Mobile Unlock
Lumpi,
I, too, have T-Mobile that I need to unlock. My problem is that I can't figure out how to install the XDA ROM that allows the unlock--the link at the bottom of the XDA page doesn't work.
Skip A
http://wiki.xda-developers.com/index.php?pagename=Wallaby
I can't open the step by step instructions for installing 'special edition 1.2'.
Some Wallabys don't support the GSM network that T-Mobile uses (at least in the UK), so if your phone works with other SIMs from Vodafone/O2 then chances are it will never work with T-Mobile. In this case, it's a hardware limitation and there is nothing that can be done about it.
Dear Stefan I want to meet u in person in stuttgart
LumpiStefan said:
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
Click to expand...
Click to collapse
Dear Stefan i will be in stuttgart for a church conference from 3 april to 12 april.
I have t-mobile wallaby PW10B1 ROM 4.02.04 eng 8/24/05 radio 6.18.00 protocall version 324e4. I am unable to unlock using xdadev_all_unlock.exe they give errors.the other ROM version u mentioned site http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe is not working. can u please help me. is it possible to add a camera and GPS reeciever to my pda? i dont have serial cable.is it possible i can wire them all?
kjpeter said:
I am unable to unlock using xdadev_all_unlock.exe they give errors.
Click to expand...
Click to collapse
This is the wron tool. That does not work on the Wallaby device.....
kjpeter said:
the other ROM version u mentioned site http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe is not working.
Click to expand...
Click to collapse
I think you´re concerning on, that the link for downloading is not working...
Try this one: ftp://xda:[email protected]/Wallaby/ROM/Special/special_rom_1.2.exe.zip
kjpeter said:
can u please help me. is it possible to add a camera and GPS reeciever to my pda? i dont have serial cable.is it possible i can wire them all?
Click to expand...
Click to collapse
GPS-receiver should be no big problem. It should be a gps-receiver with PS2/serial-Connector. Any USB wouldn´t work....
How dou you want to conenct a camera?
If you didn´t get the unlocking worked, we can try if we can make a meeting when you are in Stuttgart, than i will take a look at it....
Stefan
I downloaded SE rom 1.2 and when i run exe in dos window i have a message - ERROR GetConnectionType.
i used activesync 4.5 beta on xp .
(actually i had activesync 3.5 on my xp pc but on wallaby-activesync itsays incompatible activesync .so i changed from 3.5 to 4.5 beta )
any help stephen?
how to upgrade the activesync in my pda?
you dont
upgrade it
Try using the 3.7 or the 4.0/4.1 Version of Active Sync.....
Stefan
xda2unlock
I put in boot loader mode the pressing left side sound control switch put it in to USB flash mode and ran xda2unlock.exe at desktop got XP shutting down that xda2unlock.exe. at that time i put active sync USB on stop. couldnt do any thing.
while try once i saw serial rs232 on wallaby screen i dont know how to acivate it again and try abouve procedure.
is there any other way to unlock my mobile.?
I want to connect to gprs and browse net.
wallaby unlock
i was finnally able to unlock mine yesterday (02/25/07) but you need to change 2 things before being able to use the unlocker.exe program . first you wont be able to do it via the usb connection it just wont work due to the rom currently installed use the sd mem card method to flash the rom using a card reader and OSIMagetool.you need to change the rom to the ROM: 3.17.03 ENG (XDA special edition) you need to do this so you can flash the radio and the current rom wont allow you to do it and then change the radio to version to Radio: 6.24.00 (mine was 6.25.02 and its whats not allowing the unlock to work ) then the unlocker.exe will work . the instructions are on this url http://www.romkitchen.de/tools/manual2_unlock.htm and the software i used is on this url http://www.romkitchen.de/tools/form.php .The instructions here changed the boot loader but it wasnt needed to get my phone unlocked you can probably skip that step also . good luck
Please, link is not working
The link ftp://xda:[email protected]_1.2.exe.zip is not working anymore.
Could someone please, point me in any other direction I can look for?
Thank you very much.
Manuel J.
P.S. Still searching
http://www.romkitchen.de/tools/special_rom_1.2.exe.zip
LumpiStefan said:
http://www.romkitchen.de/tools/special_rom_1.2.exe.zip
Click to expand...
Click to collapse
Thank you so much.
Manuel lJ.
want to meet u in stuttgart
Dear lumphistephen i dont know your personel mail id so this message ,i am reaching stuttgart on 2 april will be there till 15th april for church confernce how can i contact u there?
My Host Mr.Gunter Janzens phone number 0711-4579360 or 0711-457790 or 0175 689 5555 (mobile).Also u r welcome for the meetings where friends from all over the world come there for christian fellowship.can u please
give personel mail id .mine is [email protected]
Hi,
I did the popular mistake, tried to unlock with Universal Unlocker , thinking that this is the staff to unlock all the HTC phones.
Ok. What I have now:
NO GSM - we know that
Tried to install radio roms from here, nothing. I got the information about "Checking the information...." and it is hanging like this.
I made reser and HARD RESET aswell.
I tried to install a lot. Nothing helped.
I had radio ver. 1.05.... I remember that. I have my phone from T-Mobile from UK. I had everything nice, now I have four stripes - RED GREEN BLUE and WHITE and ther is written:
HERM300
IPL-1.01
HERM300
SPL-1.04
Can anybody help me ? I tried to download mtty.exe and put all the commands (not PASTE and it still not working.
Now is 6am in Lisbon. I was sitting all that night and I am finishing writting this post.
Help if you can, regards.
Ben
Have a look on this topic http://forum.xda-developers.com/showthread.php?t=280733
It did not help. Where I can get this Qtek rom ? Is that OK for my device ? I have VARIO II from T-Mobile.
I woul like to try instal this - DUMPED English ROM from TMobile Vario II from here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_DumpedRoms
but i dont now how. There are 3 .raw files, how to put them to my phone ?
That solution didnt help: http://forum.xda-developers.com/showthread.php?t=280733
What else I can do ? I was trying with QTEK rom and a got white screen on the phone and 0% on the computer. It was hanging. I tried 5 times. Then I tried to install the Radio Rom from here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
I choosed all of them. Nothing. All of them are hanging on:
Chencking the information on your device... Please wait..
Then there is a screen to update. After long time. So when I press the button is still the same info. Checking the information on your device... Please wait..
And its hanging. When I reset to bootloader again the soft telling me:
This ROM Upgrade Utility does not design for your device.
Please get probper ROM Upgrade Utility and try again!
Where can I get the radio version 1.05 for T-Mobile Vario II ???????????
Is there possibility to download from somewhere ?
Or maybe I should try other solution ?
Read "problem 5" here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
Yes, I was tying point 5 few times. The problem is, I can connect through mtty.exe without any problems, but after soft reset, I am pressing POWER and OK button and going to bootloader mode again, and when I am trying to flash the extracted radio ROM (i tried all of them = 4) and there is a problem. nothing is working. I am waiting and waiting, and there is only info: Checking your device information or something like that. What can I do ? Sorry for my English guys.
Instead of flashing an extracted radio image try to flash a normal shipped rom (if possible matching your cid). Capture the process using usb monitor to see where exactly it fails and which error you get.
Where can I download
pof said:
normal shipped rom (if possible matching my cid).
Click to expand...
Click to collapse
?
I had RADIO 1.05 , that I remember, and have a phone from T-Mobile - MDA Vario II.
Benone said:
Where can I download ?
I had RADIO 1.05 , that I remember, and have a phone from T-Mobile - MDA Vario II.
Click to expand...
Click to collapse
No rom matching your cid is available then, use the TyTN 1.18 rom.
pof said:
No rom matching your cid is available then, use the TyTN 1.18 rom.
Click to expand...
Click to collapse
I tried that ROM 2 times, once I plugged with holding camera button and second time without. I made monitor of QTEK rom aswell, because its the one which is changing phone screen from red green blue stripes to completly white. But nothing else is doin...
A attaching logs in zip file below. I have 3 files from each session, I dont know which are correct, 2 of them i saved and 1 is exported.
What do you think ?
I used USB-monitor from http://www.hhdsoftware.com/
very weird... usb seems not working but for what you say bootloader seems to be ok. Are you sure this was after patching the radio with universal unlocker? it seems totally a different problem :-$
I guess you'll have to wait until t-mob releases a ROM matching your CID and then flash it using the hermimg.nbh sd-card flashing method.
You can also try to connect to it via serial, I have no experience on that, but a search on these forums might tell you how...
keep us updated
How long I have to wait ?
Should I go to T-Mobile when I will be back to Scotland and tell them what I did or what ? Did I lose my warranty ? Do you know approximately how much they will charge me for flashing my phone ?
Do I really have no chances to repair it by myself ?
Benone said:
How long I have to wait ?
Click to expand...
Click to collapse
Until t-mobile releases a rom with your cid... it can be today or next year, I don't know.
Benone said:
Should I go to T-Mobile when I will be back to Scotland and tell them what I did or what ? Did I lose my warranty ? Do you know approximately how much they will charge me for flashing my phone ?
Click to expand...
Click to collapse
I don't think you lost the warranty. They usually charge about 100 eur for flashing it back in the service centre. They do it by inserting a diagnostics sd card, but we don't have it for the Hermes
Benone said:
Do I really have no chances to repair it by myself ?
Click to expand...
Click to collapse
You can try flashing over serial port, and you can try sd-card flashing, but for sd-card flashing you need a rom matching your CID first.
Eureka!!!
Finally I made my device working again!
And I dont have simlock !
After trying everything.... ufffff.
THX !!!!!!
1) I downloaded ftp://xda:[email protected]/Hermes/Tools_and_Programs/HTC_Hermes_SIM_Unlock_v1.zip
2) Reset my phone in bootloader mode.
3) Plug USB cable.
4) Run HTC_Hermes_SIM_Unlock_v1.
5) After 20 min. my phone said ELO to meeeee He did not have simlock when was saying that.
YE YE YE
That was simple. If you have any Hermes radio problem, try that first - HTC_Hermes_SIM_Unlock_v1.
Will be more often here, forum seems to be really interesting.
YO!
Yipie
Glad it worked
Hi to everyone,
I've read dozens of pages on how to do a HardSPL in Prophet G4, but i simply can't have success...
I've tried 4 or 5 methods that I found here, but none of them had been suceded...
I get a white screen, i get the 3 color screen, the connection fails...
I din't know what to do more... Can somebody help me, pleeeeeeeeaaaaaaaaaaaaseeeeeeeeeeeeeee....
I use Win XP Pro, and my Prophet gives me this info when I do Soft Reset:
IPL 2.10.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.734
I was already able to change ROM once, because I had it in portuguese and now is in english, and with other logos.
But what I would like was to install WM6.1 or 6.5...
The HardSPL *.bat file gives me this information, now:
"One or more CON code pages invalid for givem keyboard code"
"cerun:failed to execute program"
Can somebody give me some idea?
Thank you so much in advance!
I was in the same situation as you. You have to find the rom:
RUU_Prophet_220734_2207114_024721_NVID.exe
Search in the forum for the rom. After extracting the rom, run the file: ROMUpdateUtility_No_VenderID.exe.
It will survive your device. then you can install a wm6x rom from this site.
Don't forget to do hard spl your device next time.
Edit: It seems the rom is here:
http ://xvx45-spf.4shared.com/account/file/12240109/ca99469a/RUU_Prophet_220734_2207114_024721_NVID.html
Also there is a "readme.doc" in the rom dir. Read the section 8. It is written for you.
keenblade said:
I was in the same situation as you. You have to find the rom:
RUU_Prophet_220734_2207114_024721_NVID.exe
Search in the forum for the rom. After extracting the rom, run the file: ROMUpdateUtility_No_VenderID.exe.
It will survive your device. then you can install a wm6x rom from this site.
Don't forget to do hard spl your device next time.
Edit: It seems the rom is here:
http ://xvx45-spf.4shared.com/account/file/12240109/ca99469a/RUU_Prophet_220734_2207114_024721_NVID.html
Also there is a "readme.doc" in the rom dir. Read the section 8. It is written for you.
Click to expand...
Click to collapse
Hi keenblade,
I was able to do that. My PPC went with the 3 color screen, and then I user a rom with No vendor. I disabled USB connection in ActiveSync, and then I could do that. I brought my PPC back.
My problem is just the HardSPL... I just can't do it... I've tried so many tomes and with so many files that I think i need some straight orientation, or i don't know what was wrong...
In this moment i have the PPC with WM5, but what i really would like to do is make a HardSPL to install WM6...
Did you try "Prophet Upgrade" tool? Before running the tool, you have to connect with activesync.
keenblade said:
Did you try "Prophet Upgrade" tool? Before running the tool, you have to connect with activesync.
Click to expand...
Click to collapse
Yes, i've used Prophet Tools already...
I guess i'm doing something wrong... I've tried again now, and went again with the 3 color screen. I'm injecting a NoVendor Rom again.
When doing HardSPL, when the screen turns white, i must disconnect and reconnect device and just wait that software finishes, right? There is a moment that nothing happensm but then ActiveSync recognizes again the PPC.
I'm i right? I must do that again. It must be somtging that i'm doing wrong...
pt_satelite said:
When doing HardSPL, when the screen turns white, i must disconnect and reconnect device and just wait that software finishes, right?
Click to expand...
Click to collapse
When the screen turns white, I do nothing. Just wait. I don't disconnect and reconnect device. Maybe this is the problem. Do not touch the device when screen turns white. It will continue eventually. Also use the latest Prophet Upgrade tool v2.6.
Let's see what will happen.
keenblade said:
When the screen turns white, I do nothing. Just wait. I don't disconnect and reconnect device. Maybe this is the problem. Do not touch the device when screen turns white. It will continue eventually. Also use the latest Prophet Upgrade tool v2.6.
Let's see what will happen.
Click to expand...
Click to collapse
I got it! I've followed this: http://forum.xda-developers.com/showthread.php?t=349900&page=9
And now I have a brand new WM 6.5 in my old Prophet!!!!!
Thank you very much!
Nice to see you get your prophet back to life. I still use wm6.1. Because it is said wpa2 does not work with wm6.5. I haven't try wpa2, yet.
Best wishes.
keenblade said:
Nice to see you get your prophet back to life. I still use wm6.1. Because it is said wpa2 does not work with wm6.5. I haven't try wpa2, yet.
Best wishes.
Click to expand...
Click to collapse
That's a good question... as i live in a non populated wifi area, i use just WPA, and it's fine. I must try WPA2, to check that.
and btw, 6.5 rom from babak00000 is just great. Love it.