Is there a way to determine my bootloader version? I see "info 1" on the bootloader FAQ, but it returns nothing.
I have a Softbank X01HT with the JASJAM_telstra_1.31.305.2_1.31.305.103_1.20.31.10_ship burned to it. I thought the CID was stored in the ROM flash so I upgraded from the previous JASJAM ROM. Now I cant downgrade apparently. I have a 1.06 Bootloader right?
Here is some additional info:
----
USB>info 2
HTCSSuperCID HTCE
USB>checkimage
IPL CRC checksum = 0x4A75448F
SPL CRC checksum = 0x3BF03635
CE CRC checksum = 0x964CDB85
ExtROM CRC checksum = 0xC80B05D
Radio Image CRC checksum = 0xB1B0E47C
----
IPL-1.01
SPL-1.04
Thanks
jokinawa said:
Is there a way to determine my bootloader version? I see "info 1" on the bootloader FAQ, but it returns nothing.
Click to expand...
Click to collapse
info "0" and "1" do not seem to work in the Hermes, "info 7" will give you your answer:
Code:
HTC Integrated Re-Flash Utility, Common Base Version : 1.50a
Device Name: H, [b]Bootloader Version : 1.04[/b]
Built at: May 26 2006 20:17:35
Copyright (c) 1998-2006 High Tech Computer Corporation
[...]
jokinawa said:
Here is some additional info:
----
USB>info 2
HTCSSuperCID HTCE
Click to expand...
Click to collapse
Your device is SuperCID, you should be able to flash ANY rom. Can you paste the output of "task 32"? It shows the security level.
Did you use v3 of imei-check unlocker?
pof said:
info "0" and "1" do not seem to work in the Hermes, "info 7" will give you your answer:
Code:
HTC Integrated Re-Flash Utility, Common Base Version : 1.50a
Device Name: H, [b]Bootloader Version : 1.04[/b]
Built at: May 26 2006 20:17:35
Copyright (c) 1998-2006 High Tech Computer Corporation
[...]
Your device is SuperCID, you should be able to flash ANY rom. Can you paste the output of "task 32"? It shows the security level.
Did you use v3 of imei-check unlocker?
Click to expand...
Click to collapse
Here is the info.
USB>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.50a
Device Name: H, Bootloader Version : 1.04
Built at: May 26 2006 20:17:35
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x6
USB>task 32
Level = 0
I used the only unlocker at the time for the X01HT.
Whats weird is it says I have Bootloader 1.04 but I cant change from:
JASJAM_telstra_1.31.305.2_1.31.305.103_1.20.31.10_ship (supposed to be BL 1.06)
down to
JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship
I was trying to downgrade to the 1.20 JASJAM to install EXT_ROM from Softbank.
When I couldn't downgrade I ran the IMEI-Check unlocker again. Maybe that changed my bootloader back down?
I will try to burn the Dopod ROM. That one has worked before.
Thank you for the help.
Really weird because your device has Seclevel=0 and SuperCID, this is a developer device able to flash any ROM without restrictions.
Did you use v3 of imei-check unlocker?? Probably they changed this on v3...
V3 Unlocker
Yes,
I used this ZIP:
M3100v3Unlock.zip
which contained this file:
M3100v3cUnlock.exe
Any other commands before I disconnect and flash? I hope flashing a ROM wont mess up my CID and Sec lvl.
Flashing rom will not touch CID and Seclevel.
This is new from v3 unlocker, they didn't do this before. CID stayed the same and SecLevel=FF (unpriviledged).
jokinawa said:
Yes,
I used this ZIP:
M3100v3Unlock.zip
Click to expand...
Click to collapse
What a pity you didn't log the process as has been told here.
Chatty said:
What a pity you didn't log the process as has been told here.
Click to expand...
Click to collapse
Yep, Sorry I unlocked it as soon as I saw it avail because I cant read Japanese.
pof said:
Flashing rom will not touch CID and Seclevel.
This is new from v3 unlocker, they didn't do this before. CID stayed the same and SecLevel=FF (unpriviledged).
Click to expand...
Click to collapse
I can confirm this. I was using Bootloader 1.06 from the Cingular ROM. I did previosuly use IMEI-CHECK V2 unlocker before upgrading to the Cingular ROM. Couldn't downgrade to other ROMS.
Have now re-unlocked again using IMEI-CHECK V3 unlocker and now can downgrade as it has reverted me to 1.04 bootloader:
USB>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.50a
Device Name: H, Bootloader Version : 1.04
Built at: May 26 2006 20:17:35
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x5
USB>task 32
Level = 0
UPDATE: Radio from latest I-Mate ROM cannot be updated with bootloader 1.06 even if device us SUPERCID, have to use IMEI-CHECK to revert back to 1.04!
Thanks for posting confirmation.
Unlocking an x01ht
Hi, First post, new to the forum,
I just moved to Tokyo and am going out today to by the softbank x01ht (at ~170$us, the gadget freak in me wont let me get something else that is bilingual)
Anyway I'm willing and minimially capable of paying and completing the imei unlocking process. I've only ever done pc and laptop flashing before so I may need a bit of a walk through on how to get this dump file your looking for.
I just have one quetion - if I unlock to a cid of supercid and security level 0, I understand that I can change my ROM to a nice user friendly English speaking ROM but will my hermes still work on my network (softbank) even though I will be operating a rom from another network in a different country.
Also is there an original sim/operator free ROM uploaded anywhere or is there any ROM you would recommend for me an english speaker on a japanese (softbank) network.
Thanks for any help you can provide. I'll do my best not too mess up the imei unlocking process dump in return.
Cheers
rorycooney said:
Hi, First post, new to the forum,
I just moved to Tokyo and am going out today to by the softbank x01ht (at ~170$us, the gadget freak in me wont let me get something else that is bilingual)
Anyway I'm willing and minimially capable of paying and completing the imei unlocking process. I've only ever done pc and laptop flashing before so I may need a bit of a walk through on how to get this dump file your looking for.
I just have one quetion - if I unlock to a cid of supercid and security level 0, I understand that I can change my ROM to a nice user friendly English speaking ROM but will my hermes still work on my network (softbank) even though I will be operating a rom from another network in a different country.
Also is there an original sim/operator free ROM uploaded anywhere or is there any ROM you would recommend for me an english speaker on a japanese (softbank) network.
Thanks for any help you can provide. I'll do my best not too mess up the imei unlocking process dump in return.
Cheers
Click to expand...
Click to collapse
All of the ROMS will work for Softbank as I have tried pretty much all of them by now. All of the files you need should be on this forum/wiki or linked from here.
Here are the main ROM files.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
I have only done this for about a week so its not too difficult. Need help just make a thread after searching for the answer first.
Have Fun.
is there a bootloader guide sorry for being a bit stupid but when i press the buttons to get it into boot mode all that is displayed on the screen is some colored lines and herm200 ipl-1.00 herm200 spl-1.04 am i doing it wrong
That is bootloader mode. You have to connect via USB with MTTY to give it commands.
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
jokinwa thank you ive been looking for that
Related
Please help me!
I screwed my german T- Mobile MDA Vario II. I used HTC universal sim unlocker and I haven’t got radio. I know I was a craze.
No GSM, no cid and no imei. The pda is working good.
I vas very happy when I find this site :
http://wiki.xda-developers.com/index...pgradeProblems.
The radio doesn’t work , no GSM, no cid and no imei. The pda is working good.
Please help me
At least your device is on bootloader 1.04
have you tried all the steps in "problem 5" on the wiki?
What the "MDA Vario II" is equipped with that one of "bootloader" 1.04 and I have done everything under "problem 5" unfortunately without steht. is carried out.
USB>info 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCEUSB>
USB>
USB>info 3
CID: Wait interpreter timeout
HTCSHUSB>
USB>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.50a
Device Name: H, Bootloader Version : 1.04
Built at: May 26 2006 20:17:35
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x5
USB>password 0000000000000000
HTCSInvalid password.R¿ËPHTCEUSB>set 1e1
USB>erase a0040000 c80000
HTCST ÚÈÒHTCEUSB>erase a0cc0000 c80000
HTCST ÚÈÒHTCEUSB>erase a1940000 640000
HTCST ÚÈÒHTCEUSB>set 1e 0
USB>
USB>
Upper CPLD version=0x4
Main Board version=0x6
Please help me
Try to flash a radio rom, and send me the USB Monitor capture exported in ANSI text format of all the radio rom flashing process.
Instructions for how to use USB Monitor are on the wiki "upgradin problems" page too:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
HElp me
Hello has a little lasted with me longer.
I hope you can help me at mine nevertheless problem!
Here is the ANSI file
The upgrade stops because radio bootloader doesn't answer to 'rerase' command after 3 retries. Repeat the steps on wiki "problem 5", do it several times. If you can't get it to work send it to repair centre.
hmm
would it use what if I make Rome one new completely, then?
gives it no questions possibility on the CID to circulate?
I don't understand what you mean.
Mummromeo, I also can't understand what you try to say. Send me a PM in german if you want to.
Another variation for this problem..
I am trying to recover my Smrtphone. I have a XDA First Trio. First I instaled a HTC ROM with bootloader 1.06. After I unlocked the SIM and CID. When I tried to install the ROM from Cirgular with Bootloader 1.04 the process stoped at 14% and now I have a mixed ROM with Bootloader 1.06... and I cannot unlock and install another ROM.... what I can do??? I am not an expert.. I dont know how to install DUmped Roms... I tried to follow the wiki but my device is locked and I dont know how to change the Key Entries.... HELP ME!!!! PLEASE
@rfgirardi: take any of the O2 XDA trion german ROMs found here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
Try to flash it while the device is in bootloader mode, if you're not successful flashing then try to flash from SD card as described here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
Hi pof,
Thanks for your help, but the procedures doesnt function... I runnede the Devicedata.exe and the file created doesnt have the information about the device... In the bootloader i have HEM100 IPL-1.01 and SPL-1.06. In the devicedata.txt cretaed I have just this
HERM100 1 0 0 å p 1.18
If i look in the System»Settings»Device Information I have:
ROM Version: 1.18.416.1
RADIO Version: Nothing...
Protocol Version: Nothing...
IMEI: Nothing..
Do you think I can try another procedure or just send the device to the workshop?
Rodrigo
rfgirardi said:
Do you think I can try another procedure or just send the device to the workshop?
Click to expand...
Click to collapse
As you can boot OS it could be downgraded to bootloader 1.04, but with a corrupted radio.
This is what I got for updating by doing this:
"Bring your bricked TyTN back to live"
http://forum.xda-developers.com/showthread.php?t=280425
With doing this, this is the only solution that will get me far enough for the boot screen to actually go white. The rest of the Rom's or Radio's don't got anywhere past this.
I hope someone can help me, no solution anywhere? Not even the Softbank chip can help.
I answered you on this thread:
http://forum.xda-developers.com/showthread.php?p=1078913#post1078913
Please do not double-post.
pof, I think it's time for a Sticky on this matter, cause it's becoming a common issue.
axiom said:
pof, I think it's time for a Sticky on this matter, cause it's becoming a common issue.
Click to expand...
Click to collapse
Yes, great idea... will make one now and let's see if we can keep all the bricked devices in one whole sticky thread. Hopefully we find a solution by joining all our efforts
Hi Pof,
I have the Unlocker that I payed to do the first unlock. After the problem when the Upgrade Rom process stoped at 14%, the feature doesnt recognize my device as a valid one. With this feature I cannot downgrade to 1.04. I dont know more what I can do.... but anyway, thanks for your efforts!!
Hi, i done a fair amount of searching but to be honest there just to many posts about this to get a answer to be sure of.
If someone could spare a moment to help out i be grateful of there time.
1) How do it tell if my phone is CID locked ?.
I sure mine is a G4 model now, but i updated rom and so on, and all works ok there, but i am unsure if i used a locked rom update. So i am unsure, of course i dont wish to brick my phone like some have.
2) I live in England, UK, and like to know what are the newest roms and radio rom for my area.
Currently i have the following....
IPL 2.16.0001
SPL 2.16.0001
GSM 02.07.10
OS 2.16.9.1
Rom Version 2.16.9.1 WWE
Rom Date 2/6/06
Radio Version 02.07.10
Protocol 413.1.03
I read that radio roms do the phone side of things, and would like to update that as i get a few drops on calls, i use O2. What is the best one i can use, also can i use a radio rom from another area not just European ?
I like to test out WM6 but like others lead me to an error on CID locking (300 error code) hence i like to confirm i have a CID locked phone, but i was told when purchased it was fully unlocked.
Any help would be very greatful.
hjkl;' why no delete?
M3NF said:
Hi, i done a fair amount of searching but to be honest there just to many posts about this to get a answer to be sure of.
If someone could spare a moment to help out i be grateful of there time.
1) How do it tell if my phone is CID locked ?.
I sure mine is a G4 model now, but i updated rom and so on, and all works ok there, but i am unsure if i used a locked rom update. So i am unsure, of course i dont wish to brick my phone like some have.
2) I live in England, UK, and like to know what are the newest roms and radio rom for my area.
Currently i have the following....
IPL 2.16.0001
SPL 2.16.0001
GSM 02.07.10
OS 2.16.9.1
Rom Version 2.16.9.1 WWE
Rom Date 2/6/06
Radio Version 02.07.10
Protocol 413.1.03
I read that radio roms do the phone side of things, and would like to update that as i get a few drops on calls, i use O2. What is the best one i can use, also can i use a radio rom from another area not just European ?
I like to test out WM6 but like others lead me to an error on CID locking (300 error code) hence i like to confirm i have a CID locked phone, but i was told when purchased it was fully unlocked.
Any help would be very greatful.
Click to expand...
Click to collapse
Here is what you have to do:
- download any G4 rom from xda ftp
- unpack it
- replace the update tool from the WM6 one with the one from the G4 rom (when you will run it, it will be in italian)
- don`t worry about bricking your phone, it can only happen if you try to update your IPL/SPL and the WM6 ROM doesn`t include those upgrades.
(if your Wizard is CID-locked, after the upgrade, your OS will be the same one you had before the upgrade, if not, be happy) )
I can give a little help if you feel you can trust me.
Use a little program called pdocread.exe (by itsme) and read the bdk1 using the following command:
pdocread.exe -n 1 0 0x10000 [saved_filename] and then contact me via PM to send me the encrypted file so that i can read it and check the CID value. I must warn you that the resulting file will have your phone's IMEI in it.
For this program to work your phone must have RAPI and Unsigned Apps enabled
You could also use mtty.exe program to check the CID status by using the info 2 command
Code:
Cmd>info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
***** user area size = 0x3D080000 Bytes
[B] [COLOR=Blue]HTCSSuperCID ' HTCE[/COLOR][/B] <------- CID status!!!
To be honest i'd prefer the first solution since i'm writing a Wizard service tool and as my phone is a full unlocked Qtek i need locked CID blocks to compare and understand a bit more about that zone.
cheers
Sent email with pdocread info. Here are my mtty results.
PHP:
Cmd>info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
***** user area size = 0x3C8C0000 Bytes
HTCSWIZCNG01 »“4‚HTCE
Cmd>
I assume the "HTCSWIZCNG01" is just verifying what I already knew? That I am CID locked to cingular?
I managed to get a list with a lot of CID codes for different operators and will check your value (once i find the file ) but i also believe that your phone is indeed CID locked; sorry
Many thanks for the details, tried it last night but would not change, so i at least know i have a cid locked system now.
Maybe wiorth getting it unlocked, but to be honest it was more of a wanting to know if it was or was not, know i know that i happy with what i got. Maybe an offical update will work when its released.
Again cheers all for your help and advice.
Any further info still be greatful with details of first post about radio roms still if you can.
Thunder_PC said:
I assume the "HTCSWIZCNG01" is just verifying what I already knew? That I am CID locked to cingular?
Click to expand...
Click to collapse
Yep, that CID is indeed from Cingular. Check with the file attached i extracted from some file i can't recall exactly which and where i got it...
Thunder_PC said:
Sent email with pdocread info
Click to expand...
Click to collapse
Pls make new dump as it should be 64Kb (0x10000)
Hi, please someone can tell me , as i think, my 9100 is CID unlocked?:
Cmd>info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
***** user area size = 0x1E880000 Bytes
HTCSWIZQTK01 µ…“HTCE
Cmd>
After do a CID unlock with awizard, rechecked and still showing the same.
but when i try to dump rom doing "r2sd all" in mtty1.42 it doesn´t allows me. In awizard done.
Cmd>r2sd all
***** user area size = 0x1E880000 Bytes
R2SDBackup() - Download type = 5
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
Cmd>
If it´s unloked, i supose, after reading forums, that i can change rom from WWE to last Spanish (2.18....)
IPL/SPL: 2.17.0001
GSM 02.07.10
OS 2.17.7.2
wait your answers. Thanks.
A quick search around the forum would have shown you that it's not possible to CID unlock a G4 device for free.
Yours is a G4 and if you compare with my values from post #4 you can see that yours isn't CID unlocked
cheers
Thanks.
i suposed that as wasn´t in CID list was unlocked. But i get it more clear.
So the only ways to change rom and language are, or pay or try it with the Solutuion found: how to flash any rom to CIDLOCKED DEVICE.
TOM_WILE said:
Thanks.
i suposed that as wasn´t in CID list was unlocked. But i get it more clear.
So the only ways to change rom and language are, or pay or try it with the Solutuion found: how to flash any rom to CIDLOCKED DEVICE.
Click to expand...
Click to collapse
Yep, either with ShellTool or with my Wizard Service Tool that allows to flash the OS binary partition
cheers
mestrini said:
Yep, either with ShellTool or with my Wizard Service Tool that allows to flash the OS binary partition
cheers
Click to expand...
Click to collapse
Hi again, it´s done.
I did it with "QTEK Rom 2.18.7.8 AKU2 ESN + Radio 02.47.11 Con CID Bloqueado by jossma". It works great, and in spanish. I have to "repair" a little problem with keyboard.
i´m happy. thanks for all. jejeje
sos.sos.sos
I have blocked SPV M3000
CID: WIZORGB8
Phone is CID LOCKED!
Which withdraw drinking
plz HELP ME !!!!!!!
hi everyone I know im posting in the wroge thread but this site is really huge, I need any help cuz i begin to hate my ppc and im stiil a student and cant buy another one cuz my father is really anoying, so i got an i-mate pda2 which i really love its design but the prob. is wm2003se there is no other roms i can find + i dont know how to get this cid unlocker and any rom just any , i will be pleased v.much for help i want the links where i can find a cid unlocker and a new rom which can run manila or wm5,6 plz helppp :'(
hi,guys:
As we know,Both HTC_Hermes_SIM_CID_Unlock_v3a and Hard-SPL v7 are very very great tools and mainly used to unlock sim and CID.What are the difference between them? And what's the relationship between them?
Now I want to flash and unlock my CID and sim,which tool should I prefer and why?
Thanks in advance,
Best regards!
If you need to SIM unlock, use the SIM unlocker first, it will install HardSPL for you. If your device is already sim-unlocked, then you only need hardSPL.
First,thanks,pof!You are the MAN!
So the SIM_CID_Unlock_v3a software contains HardSPL,is it right?
now when I go into the tri-color mode,my T-mobile MDA(HERM300) shows me that IPL is 1.00 and SPL is MFG 1.01,and the following:
-----------------------------------------------------
USB>info 2
HTCSSuperCID 蚤蹾TCE
USB>task 32
Level = 0
USB>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.50a
Device Name: H, Bootloader Version : 1.01
Built at: Apr 11 2006 18:29:22
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x5
Upper CPLD version=0x4
Main Board version=0x6
---------------------------------------------------
Can I use SIM_CID_Unlock_v3a in this condition? I know,though,now my phone is working with SuperCID,I really want to crack it by myself again with this great software,and in this way,I could deal with it in my control.
BTW,how can I verify whether the SIM is unlocked or not?
Thanks again!
shayuegg said:
BTW,how can I verify whether the SIM is unlocked or not?
Click to expand...
Click to collapse
You could always just insert a non T-Mobile Sim into the device and check to make sure you can make calls on it. If so then you are SIM unlocked. If not then you still need to perform the SIM unlock.
This is Hard-SPL for the G4; flashing procedure is essentially the same as G3 although do make sure that the filesize you flash is 0xC0000 rather than the 1MB that people flash for a G3.
Cheers!
PS: while this has been tested and is known to work, I do not actually own a Wizard and so am relatively limited in the help I can offer with regard to issues you may have getting your device working or whatever
Great job Olipro! Stickied.
Damn nice! One step closer to a real cid-unlock You are great!
Olipro said:
This is Hard-SPL for the G4; flashing procedure is essentially the same as G3 although do make sure that the filesize you flash is 0xC0000 rather than the 1MB that people flash for a G3.
Cheers!
PS: while this has been tested and is known to work, I do not actually own a Wizard and so am relatively limited in the help I can offer with regard to issues you may have getting your device working or whatever
Click to expand...
Click to collapse
sorry 2 sound like a noob
i've been using the uni
just bought a used g4 wizard..
how do v use this.????
how's this different from
http://forum.xda-developers.com/showthread.php?t=332320
frz said:
sorry 2 sound like a noob
i've been using the uni
just bought a used g4 wizard..
how do v use this.????
how's this different from
http://forum.xda-developers.com/showthread.php?t=332320
Click to expand...
Click to collapse
This is one is the patched SPL file alone (the original). The other is the 'spoon feed' version meaning you just need to run a file once and all the job is done nice and easily...
PS:
One thing i find hard to understand is why this thread was made sticky a few minutes after being posted and the other two from The Equinox (sSPL and HardSPL), who are meant to be easy to handle and error proof for noobs weren't, even though they have proven to be of great help and acceptance.
Are we here for the good of all or is the status quo a relevant issue? (off the chest...sorry)
Can I flash this file in bootloader mode ??
My Wizzard is freezing on splashscreen and it's work only in bootloader mode. Is there any way to flash this file ??
It's the only rescue for my Wizzard.
chrzanek said:
Can I flash this file in bootloader mode ??
My Wizzard is freezing on splashscreen and it's work only in bootloader mode. Is there any way to flash this file ??
It's the only rescue for my Wizzard.
Click to expand...
Click to collapse
You can but you must first build a nk.nb file with it and also flash via RUU
wow thanks....it's just sad that i don't know how i can help....
mestrini said:
You can but you must first build a nk.nb file with it and also flash via RUU
Click to expand...
Click to collapse
Thanks I did this, but it does't help to me i still have:
Cmd>r2sd os
***** user area size = 0xF300000 Bytes
R2SDBackup() - Download type = 3
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
when i'm trying to copy OS to sd card ( i have format failed when i'm trying HR )
So the only way is imei-check
You can use this topic(if your device is G3)
http://forum.xda-developers.com/showthread.php?t=307332&page=4
1. flash Prophet cooked rom -> you can Hardreset
2. flash shiprom then unlock
i saved my G3 like that
RClub said:
You can use this topic(if your device is G3)
http://forum.xda-developers.com/showthread.php?t=307332&page=4
1. flash Prophet cooked rom -> you can Hardreset
2. flash shiprom then unlock
i saved my G3 like that
Click to expand...
Click to collapse
unfortunately it's G4. But thanks.
Hard-SPL not working at all on my WIZ (T-Mobile MDA VARIO US G4) CID unlock impossible! Anybody an idea how to get it unlocked?
The spl flashing works fine and it even shows the olip spl when rebooting the wiz but afterwards everything remains the same - can't flash other roms!
Junner2003 said:
Hard-SPL not working at all on my WIZ (T-Mobile MDA VARIO US G4) CID unlock impossible! Anybody an idea how to get it unlocked?
The spl flashing works fine and it even shows the olip spl when rebooting the wiz but afterwards everything remains the same - can't flash other roms!
Click to expand...
Click to collapse
Have you tried the Mun RUU in the Hard SPL posted in TS of the Hard SPL thread?
How does the Soft SPL work?
is it possible to use it even with my SPL? (see signature)
cheers
irm
I have an extra 8125 laying around so I thought I would play with it. I applied your update and I am going to assume I can upgrade the 8125 to WM6 as long as the IPL and SPL doesnt change. I have looked at some other post on this site and there seems to be options in wich you can upgrade the IPL/SPL and still CID and SIM unlock the 8125. At the present with the solution from this thread I have the 8125 Sim unlocked.
total noob here
Olipro said:
This is Hard-SPL for the G4; flashing procedure is essentially the same as G3 although do make sure that the filesize you flash is 0xC0000 rather than the 1MB that people flash for a G3.
Cheers!
PS: while this has been tested and is known to work, I do not actually own a Wizard and so am relatively limited in the help I can offer with regard to issues you may have getting your device working or whatever
Click to expand...
Click to collapse
i know my device is a G4 so am in the right place, but what exactly do i do with this file?
How to upgrade a unlocked HTC Wizard
Hi
I have a used Qtek 9100 with preinstalled NBD 9.3 ( Do not know who did it? ). I know it is a G4 and it may be CID Unlocked. I wanted to flash a new or another ROM so what should I do.
What is the HardSPL and SoftSPL, do I need to use these to flash new rom to my mobile.
I have installed/checked the Wizard Service Tool v4.2.2. These are the info..
--------------------------------------------------------------------
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356384008852681
=> Bootloaders:
IPL: 2.17.0001 (G4 device)
SPL: 2.17.0001 (G4 device)
Built on Feb 10 2006 at 11:55:14
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.2.xxx (Build 18125.0.4.2)
ROM: 0.0
Registry AKU: .0.4.2
Radio: 02.07.1ò
Protocol: P413.1.03
=>Extended_ROM:
Version: Unknown
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
4fb80df6 - 19.00k (0x4c00)
ee9ce08e - 9.99M (0x9fd800)
ceadaa12 - 43.24M (0x2b3e000)
eeb28aa2 - 50.88M (0x32e0000)
eeb287ee - 3.00M (0x300000)
0eb2879a - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000fd23020138300e891503067f
Key Index: 2
------------------------------------------------------------
Please guide me.
At last, BT icon is disabled in taskbar. How to enable it? Please help....
Many Thanks
Srikanth.K
ksrikanth said:
Hi
I have a used Qtek 9100 with preinstalled NBD 9.3 ( Do not know who did it? ). I know it is a G4 and it may be CID Unlocked. I wanted to flash a new or another ROM so what should I do.
What is the HardSPL and SoftSPL, do I need to use these to flash new rom to my mobile.
I have installed/checked the Wizard Service Tool v4.2.2. These are the info..
--------------------------------------------------------------------
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356384008852681
=> Bootloaders:
IPL: 2.17.0001 (G4 device)
SPL: 2.17.0001 (G4 device)
Built on Feb 10 2006 at 11:55:14
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.2.xxx (Build 18125.0.4.2)
ROM: 0.0
Registry AKU: .0.4.2
Radio: 02.07.1ò
Protocol: P413.1.03
=>Extended_ROM:
Version: Unknown
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
4fb80df6 - 19.00k (0x4c00)
ee9ce08e - 9.99M (0x9fd800)
ceadaa12 - 43.24M (0x2b3e000)
eeb28aa2 - 50.88M (0x32e0000)
eeb287ee - 3.00M (0x300000)
0eb2879a - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000fd23020138300e891503067f
Key Index: 2
------------------------------------------------------------
Please guide me.
At last, BT icon is disabled in taskbar. How to enable it? Please help....
Many Thanks
Srikanth.K
Click to expand...
Click to collapse
With IPL/SPL 2.17.0001 and running NBD 9 series,which is a wm6 rom,it must have be upgraded through 'SoftSPL' method,now you can change the rom either with SoftSPL or if you want to get your phone semi-CID unlocked,you can apply 'HardSPL',it'll flash patched IPL/SPL to make it semi-CID unlocked,remember,a G4 device cannot be permanantly CID unlocked like a G3 phone,but you'll be able to flash any wm6 or 6.1 rom easily with HardSPL.
HardSPL method is done only once and after that you can flash and change rom easily,where as,with SoftSPL,you'll have to do the Flash every time through SoftSPL,but it doesn't change the original Bootloaders (IPL/SPL).
The choice is your !
How to upgrade my i-mate K-JAM? please help me
these are the details of my device:
I want to install Windows Mobile 6 Professional
I want to install Windows Mobile 6 Professional on my imate K-JAM. its details are mentioned as under:
Received Info Via:
Wizard Service Tool v4.2.1
Device Info:
CPU: Texas Instruments - OMAP850
MODEL: Wizard
=> Bootloaders:
IPL: 2.26.0001 (G4 device)
SPL: 2.26.0001 (G4 device)
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14955.2.3.0)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.26.10.105
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
ce9df3ca - 5.00M (0x4fec00)
2ea9d13a - 48.23M (0x303c000)
4fb25f92 - 50.95M (0x32f4000)
6fb25f3e - 2.94M (0x2f0000)
cfb25fb6 - 3.06M (0x30fc00)
All Done.
I have tried a lot with different ROMs but ...i just wana weep .....i dono wat the hell is happening with all this....
some times wen the installation completes and everything looks fine as with Wizard_Love_2.26.10.2_WWE_Novii_CF2 it worked fine but when i checked the version of WM it says its same as before WM5. sometimes it completes the installation with e.g Xplore_1.1 but at the time of reboot it shoes bootloader screen (try color screen). then i re-install the original WM5 ROM and get my device back in action from that BRICKED HELL.
please help me out and tell me the right path to go on...
1- is it possible to upgrade this device to WM6?
2- if yes then what are the exact files and exact method to do all that?
3- I NEED IT URGENTLY.... I MEAN THE ANSWER.?
thnx and regards,
Yawar
oh one thing more i have checked the CID lock the answer is:
SPL version is 2.26.0001
DOC chip is write-protected!!
Downgrade SPL to no higher than 1.06 and
repeat procedure.
Now Tell Me Wat to do????
http://forum.xda-developers.com/showpost.php?p=1849388&postcount=3
Download the ROM from this page:
http://rapidshare.com/users/IW25NT
Install the ROM which is clean vanilla.. I have installed the same in my kjam and it works fine...
for more info mail me at [email protected]
y4yawar
To upgrade your phone read and do as instructed in stickies 'HardSPL' or 'SoftSPL' in this forum.
Cheers!
Resolved By Me
Well all, i have resolved this problem. the reason was CID Locked. I used one tool to UNLOCK CID. Now everything works fine.
Thanks For all of yours help
y4yawar said:
Well all, i have resolved this problem. the reason was CID Locked. I used one tool to UNLOCK CID. Now everything works fine.
Thanks For all of yours help
Click to expand...
Click to collapse
For free? that's not possible unless you're talking about HardSPL (which isn't a real CID unlocking...)
y4yawar said:
Well all, i have resolved this problem. the reason was CID Locked. I used one tool to UNLOCK CID. Now everything works fine.
Thanks For all of yours help
Click to expand...
Click to collapse
Which tool did you use? Because I used all the tools I know but couldn't unlock that G4 monster. I am going to the mental hospital if I don't find the solution in 24 hours,
sipraomer said:
Which tool did you use? Because I used all the tools I know but couldn't unlock that G4 monster. I am going to the mental hospital if I don't find the solution in 24 hours,
Click to expand...
Click to collapse
Hold your horses here! if its a G4,it cannot be CID unlocked,there's no free solution for this,the only other way to get it upgraded is through 'HardSPL' or 'SoftSPL', both the methods are posted as stickies in this G4 forum,read and do it correctly.
zabardast_1 said:
Hold your horses here! if its a G4,it cannot be CID unlocked,there's no free solution for this,the only other way to get it upgraded is through 'HardSPL' or 'SoftSPL', both the methods are posted as stickies in this G4 forum,read and do it correctly.
Click to expand...
Click to collapse
hahahh. Yeh I managed it. Illusion is a dangerous enemy. My saying.