Related
good morning to everybody...
i have an xda I
my akku went off during my holiday. now i recharged it an the wallaby bootloader v5.22
starts an nothing else doesn´t start.... can anybody tell me how to start the windows mobile software?
thx 4 help
s3V3n said:
good morning to everybody...
i have an xda I
my akku went off during my holiday. now i recharged it an the wallaby bootloader v5.22
starts an nothing else doesn´t start.... can anybody tell me how to start the windows mobile software?
thx 4 help
Click to expand...
Click to collapse
Have you tried a hard reset?
Are you sure, you do not have an hardware problem? Normaly you enter the bootloader by pressing power button and making a soft reset. Maybe this switch is blockated by anything....
HTH
Stefan
yes i don´t think its a hardware problem because nobody touched it during the week of my holiday but i´ll go to the shop tomorrow looking they will say
oh and yes i did a few hard and soft resets... no effect... he only doesnt boot windows the bootloader starts but there i can only do selftests
please can any one tell me how to fromat Qtek 1010?? thanks in advance
XDA won't start
Dear forum users,
I own a XDA I, which is sold as PCT 206 in Turkey. The original OS is ppc 2002
I also have the same problem on my XDA 1. I used up the battery to the end and after plugging the charger I got the bootloader screen.
At that time a had a cooked rom ppc 2003.
I tried to flash from SD to the original ppc 2002 but I still get the bootloader after soft and/or hard resetting.
Does somebody have an idea.
Best regards.
Sounds like the power switch may be stuck if you are entering bootloader from soft reset.
same trouble
cruisin-thru said:
Sounds like the power switch may be stuck if you are entering bootloader from soft reset.
Click to expand...
Click to collapse
i have same problem, after i upgrade from SD card and after i gave a cold boot machine start with TMOBILE logo and: 4.0.1.16, R6.25.02, G324e4...
by the way... i have no more access to setup options at start... any idea about how to fix this?
Is there a way to access to RAM using IR or USB without init windows CE thanks a lot
lambertoh, you have a different problem, you need to reflash your phone using sd card method again, it might be helpful to try a different memory card.
cruisin-thru said:
lambertoh, you have a different problem, you need to reflash your phone using sd card method again, it might be helpful to try a different memory card.
Click to expand...
Click to collapse
thanks for your response, i did it fix unsuccesfully. I have no access to test menu (before i had in fact but i kill it ). Can you tell me how can i write the bootloader into the wallaby, maybe with a jtag, or maybe with a byteblaster cable, i don't know too much in thius kind of themes but i have to... Actually i'm trying building a serial cable and i pretend use tty application to try to use an terminal pda in the computer.
Excuse for the english, is not my native language.
any solution
;740211 said:
oh and yes i did a few hard and soft resets... no effect... he only doesnt boot windows the bootloader starts but there i can only do selftests
Click to expand...
Click to collapse
i am having this same problem ... i have a T-Mobile and it is stuck on Ozone screen i can run the bootloader but it allows only tests...
can anyone tell me a solution ?
if a valid rom is put on the sd card the right way entering bootloader auto update the rom
Hey guys and gals,
In desperate need of help. Tried to upgrade my himalaya with the Asia O2 XDA II WM 2003 SE Upgrade.
Upgrade was unsuccesful; upon turning on the XDA there are only two things on the screen; near the top, it says 'Serial", and near the bottom, "v 1.06".
The xda will not respond to hard resets nor soft resets. What can I do to recover from this disaster? When cradled, it will not connect via usb to activesync.
If this is not user servicable, does anyone know a good place in Melbourne, Australia to fix the himalaya?
Any help is appreciated!
When it's docked in the cradle, does SERIAL change to USB?
Try this:
Take out the memory card (if you have one) and the battery. Not sure why the memory card, but mine had problems with it in when I tried to upgrade.
Wait 30 mins or so for the battery backup to flatten/wipe everything (You loose everything on a ROM upgrade anyway)
then plug the battery back in and recradle it and simply try starting the flash again.
I've had similar problems, but this has always worked here and we have different devices, but I feel confident that the same solution may work.
had the same problem... my solution was docking it in the cradle (it does not show connected) and reinstall the ROM
Failed upgrade of XDAII
Hello I was in the process of updating my XDA rom and after 50% was copied to the device it dropped out.
Now when I power on the XDA it hangs on the O2 screen and my rom flash program cannot talk to it.
I have tried taking the battery out and leaving it for an hour but this has no effect.
Any ideas?
Installing rom from the SD card on boot
Is it possible to do this and if so how would I go about it?
If I cant get an OS on it its going to have to go away for repair for 3 weeks.
Also have you done a few upgrades on your XDA2 and on the same PC?
I had the same issue with my XDA2 as I was upgrading to 2003SE (before getting a 2i) and I could not get any further than the USB 1.01 screen.
I installed Activesync on a laptop, put the USB in and put my 2i in to complete the installation. Then, I put the 2 in and tried rerunning the upgrade...worked first time! I'd spent 6 hours on my PC trying to get it working.
Worth a try, certainly!
Cheers
Anthony
screen shows USB at the top and v1.06 at the bottom. HELP !!
screen shows USB at the top and v1.06 at the bottom. HELP !!
Hello everyone. I am new to this forum thing. I bought a 02 XDA 2 on Ebay last week. I tried to upgrade ROM to English from Chinese and now my screen is dead and no link to Microsoft ActivieSync.
Is my unit dead ??
Please help !!
forgot to mention that I tried the things posted earlier !
I tried taking battery out for 1/2 hour and then the hard reset. Still nothing
Help !!!!
My wife is going to kill me because I just bought this XDA 2 and now it is dead ! (like me soon !)
disastrous xda upgrade
try consulting dr. stein or toenailed or xda jojo and zeroxtreme. these are the tech guys in southeast asia. they're very good! :lol:
Have you tried rebooting into Bootloader mode (hold down D pad in centre position, then power button and soft reset - all at the same time), then trying to rerun the upgrade?
Re: screen shows USB at the top and v1.06 at the bottom. HEL
maij said:
screen shows USB at the top and v1.06 at the bottom. HELP !!
Hello everyone. I am new to this forum thing. I bought a 02 XDA 2 on Ebay last week. I tried to upgrade ROM to English from Chinese and now my screen is dead and no link to Microsoft ActivieSync.
Is my unit dead ??
Please help !!
Click to expand...
Click to collapse
When you started the upgrade did all seem to go as planned? Did you have the power cable plugged in whilst upgrading? Did you notice any strange messages when it started to upgrade, and how far roughly did it get before you started having problems?
Also, what was the software version before you upgraded? Any ideas?
Cheers
Anthony
Hi Anthony: Everything seem to be going ok and then..
the screen went blank. I did have the AC plugged in during the attempted ROM conversion from Chinese to English and I tried rebooting into bootloader mode and nothing.
Do you think my 02 XDA2 can be fixed ?
Thanks
downgrade XDAII failure
Pals ,
I also facing the same problems , now my XDA II is blanked and only
Serial and V1.06 written ,
can anyone in this forum help ? please eeee ?
thanks
if the screen shows you something like serial1.something you're still okay. do a couple of hard resets; then put the unit back on the cradle. as expected activesync will not recognize the device BUT double click the upgrade file again.
this happened to me when i went to wm2003se; forgot to do a soft reset and proceeded with the upgrade. what i did was uncradled the unit, did a hard reset (screen still showed serial1.06), cradled her back (nothing happens here) then doubled clicked on the upgrade file. it proceeded accordingly until the entire process was completed.
dont' fret, as long as something's still showing on your screen you're still a-ok.
Thanks Robs..
I will try...
Yeah, after hard-resetting the unit, it seems that it did not reset because the serial/usb letters & v1.07 at the bottom of the screen is still there. But if you drain the battery, then put it back in the cradle & restart the ROM upgrade, it will work. At least it did for me.
As I've also said but seems to have been ignored, try running the upgrade on a different PC...you may be surprised!
Cheers
Ant
thanks Anton ...
I tried so many times in my pc until the sync wont work anymore , so i tried to do at my laptop ... still same .... should i change to another pc again ? pls advice , thanks man.
Dear O2inCN
what is the best way to drain the batt ?
this morning I tried to use the batt in my other XDAII device until dropped to 6%, then i unplug it , and after 1 hour later I begin to plug it into my problem XDA II ( sorry, I had 2 devices XDA II ) , now i restarting the downgrading process again, its already half hour , Still CHECKING THE INFORMATION ON POCKET PC ... what went wrong ?
is it stucked or the batt is charging firstly ? thanks ....
Re: Dear O2inCN
sbudiarta said:
what is the best way to drain the batt ?
this morning I tried to use the batt in my other XDAII device until dropped to 6%, then i unplug it , and after 1 hour later I begin to plug it into my problem XDA II ( sorry, I had 2 devices XDA II ) , now i restarting the downgrading process again, its already half hour , Still CHECKING THE INFORMATION ON POCKET PC ... what went wrong ?
is it stucked or the batt is charging firstly ? thanks ....
Click to expand...
Click to collapse
Hi, did you manage to downgrade to WM2003? Was your bootloader version 1.06? I had problem in downgrading from WM2003SE. Hope to hear from you. thanks.
Hello everyone
( sorry 4 my bad english )
I have a small ( big ) problem.
I upgradeted my XDA1 with the upgrade from T-Mobile (GER)
Everything was good, till the XDA stoped working and the Active-Sync brocke the conaction to the XDA. On the XDA the screen showed me, that the upgrade will take 5 min. to finish, and that was all. Full stop. Now after i did started the Bootloader the screen shows just strips and nothing more... Oh yeah, i did not make a boot sd, so i could not start from the sd-card.
what can i do??? i tryed allready the super tips in hear, but i'm not realy a pc freak, so nothing worked ...
If someone of ( out there ) understood what i mean, pls help me...
Huffen
PS: Bootloader 5.15 / GSM OK
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
flash it using the sdcard then
Hello
@ Rudegar:
I did it that way, and now the thing does not atart in the bootloader anymore.
Not ure fould... Was my own risk!!!
Now nothing works....ahhhhh, what can i do now???
HELP... i get crazy... Please, if anyone can help to bring it back to life.
Thank u all very much...
huffen
when the rom is correctly on the sdcard using a sdcard reader
the reader stops being able to read the sdcard as a valid sdcard
but when in the bootloader the pda autobegin the update
if you are unsure how to get it in bootloader read xda-wiki for wallaby
the pda should at all times be connected to power
Hello,
My xda will not start at all. nothing happens anymore. just off. I switch on the and nothing happens any more. No bootmanager, just the red and green lights for the telefon are on. What can i do now? Is the xda now totaly dead? Or is it possible to restore the xda and bring it back to life?
Thanks Huffen
only think i can think off on the top of my head is
hardreset button
hi guys! im new in using Smart phones. i got a problem w/ my XDA ATOM, i tried upgrading my rom to WM 6.5 using SD card. but suddenly that ROM is I think 'corrupted'. now, my phone is dead and not functioning.
my only hope is the bootloader.. can someone help me to fix my problem??
thanks in advance!
ayazero5 said:
hi guys! im new in using Smart phones. i got a problem w/ my XDA ATOM, i tried upgrading my rom to WM 6.5 using SD card. but suddenly that ROM is I think 'corrupted'. now, my phone is dead and not functioning.
my only hope is the bootloader.. can someone help me to fix my problem??
thanks in advance!
Click to expand...
Click to collapse
try this :
Brick Test:
1. Make sure your device has ample battery charge. If you're not sure plug
it in with the wall charger for at least 10min
2. Remove your battery for at least 1 minute
3. Replace your battery while observing the LED lights
4. If the LED blinks once upon battery insertion, you might have hope yet
The only way to upgrade on a semi-brick device, is to upgrade through bootloader mode. No bootloader mode, No upgrade possible - period.
Entering Bootloader Mode on Semi-Brick Atom:
1. Remove battery for for at least 1 minute
2. Press CAMERA+RESET(stylus) simultaneously
3. Insert battery while still holding the buttons
4. Release the buttons at the same time (You should see bootloader
screen)
Note: Failure to hold the buttons at the same time during battery insertion will cause it not to work.
good luck
@ knoxbrotherhood
yes, i can access the bootloader.. but i cant find the right ROM for my ATOM.
please go here for more advanced
http://forum.xda-developers.com/group.php?do=discuss&group=&discussionid=306
having a trouble? just post reply
thx man my atom died too
my piece of junk atom died last night aswell i followed your instructions now it installing windows 6.5
hello everybody. my english is verry bad, but i am gong to trie as good as i can.
I rooted my phone and installed xrecovery and i put a rom on the sd card. i started up my phone and the lanugh was chains or somhething. it was imposible to understand but i found english(united kingdom) when i started up my phone. i started up a program just to test that everything worked. everything seemed to work exept the buttons on the mobile. so my phone is on and running a program and i cant go back/ shut down my phone and i have searched on this forum on how i can repair this ****...... i realy need my phone beacuse i am studing.
i hoped sombody can help me
Try putting off your battery, then you turn on again and use xrecovery to Factory Reset, or even you can wait your battery deplete, so you charge it, then make a SEUS repair (http://www.youtube.com/watch?v=zS2LIuy6YfY) it will probably save your life, if not. I'm sorry, you bricked your phone forever.
i tried to do as told on the link you gave me(youtube link) but i cant turn of the phone on step 3(beacuse no buttons work so i cant turn the phone of......) but the battery is twist firmly so how can i take it out and take it back in the ****ing phone? i am starting to be pissed on my self here now... mabye i shold go and get the axe and crhus the phone?
If it is your last option search on google: "ifix xperia x10 mini dissemble (sorry I forgot if its dissemble or dissamble)" it will teach you how to open you battery package, but it's very very very very very very very very very very hell dangerous to do if you are unexperienced... Im on cellphone, so I dont remember the complete url so I posted the google search.
Sent from my U20i using XDA App