Related
hi
sometimes when i have upgrading my device (i-mate) and doing hardrest it was go to bootloader mode. after i heard about WM2003SE the chines one i had to do an upgrade by SD card flsh. while i was upgrading many bootloader wont to recognize the SD ,dont know why. but after i used WinHex to write the BIN of chines rom it worked and bootloader can do upgrad section. but it says "Failed" as usual i done a hardrest to get bootloader back but this time ...... i think my bootloader is really dead.
cant get power on, plus when i plug it into the charger the is now light on LED,,,,, i think it will be junk
is there anyway to get my device life back?
best regards
ops that was me,,,,,,
ops that was me, but i think i forgot to login,,,,
Re: ops that was me,,,,,,
NightmarE said:
ops that was me, but i think i forgot to login,,,,
Click to expand...
Click to collapse
Try .. http://forum.xda-developers.com/viewtopic.php?t=13651
I had similiar problem but my XDAII is fine now with WM2K3SE on it ...
good morning to everybody...
i have an xda I
my akku went off during my holiday. now i recharged it an the wallaby bootloader v5.22
starts an nothing else doesn´t start.... can anybody tell me how to start the windows mobile software?
thx 4 help
s3V3n said:
good morning to everybody...
i have an xda I
my akku went off during my holiday. now i recharged it an the wallaby bootloader v5.22
starts an nothing else doesn´t start.... can anybody tell me how to start the windows mobile software?
thx 4 help
Click to expand...
Click to collapse
Have you tried a hard reset?
Are you sure, you do not have an hardware problem? Normaly you enter the bootloader by pressing power button and making a soft reset. Maybe this switch is blockated by anything....
HTH
Stefan
yes i don´t think its a hardware problem because nobody touched it during the week of my holiday but i´ll go to the shop tomorrow looking they will say
oh and yes i did a few hard and soft resets... no effect... he only doesnt boot windows the bootloader starts but there i can only do selftests
please can any one tell me how to fromat Qtek 1010?? thanks in advance
XDA won't start
Dear forum users,
I own a XDA I, which is sold as PCT 206 in Turkey. The original OS is ppc 2002
I also have the same problem on my XDA 1. I used up the battery to the end and after plugging the charger I got the bootloader screen.
At that time a had a cooked rom ppc 2003.
I tried to flash from SD to the original ppc 2002 but I still get the bootloader after soft and/or hard resetting.
Does somebody have an idea.
Best regards.
Sounds like the power switch may be stuck if you are entering bootloader from soft reset.
same trouble
cruisin-thru said:
Sounds like the power switch may be stuck if you are entering bootloader from soft reset.
Click to expand...
Click to collapse
i have same problem, after i upgrade from SD card and after i gave a cold boot machine start with TMOBILE logo and: 4.0.1.16, R6.25.02, G324e4...
by the way... i have no more access to setup options at start... any idea about how to fix this?
Is there a way to access to RAM using IR or USB without init windows CE thanks a lot
lambertoh, you have a different problem, you need to reflash your phone using sd card method again, it might be helpful to try a different memory card.
cruisin-thru said:
lambertoh, you have a different problem, you need to reflash your phone using sd card method again, it might be helpful to try a different memory card.
Click to expand...
Click to collapse
thanks for your response, i did it fix unsuccesfully. I have no access to test menu (before i had in fact but i kill it ). Can you tell me how can i write the bootloader into the wallaby, maybe with a jtag, or maybe with a byteblaster cable, i don't know too much in thius kind of themes but i have to... Actually i'm trying building a serial cable and i pretend use tty application to try to use an terminal pda in the computer.
Excuse for the english, is not my native language.
any solution
;740211 said:
oh and yes i did a few hard and soft resets... no effect... he only doesnt boot windows the bootloader starts but there i can only do selftests
Click to expand...
Click to collapse
i am having this same problem ... i have a T-Mobile and it is stuck on Ozone screen i can run the bootloader but it allows only tests...
can anyone tell me a solution ?
if a valid rom is put on the sd card the right way entering bootloader auto update the rom
Hey guys and gals,
In desperate need of help. Tried to upgrade my himalaya with the Asia O2 XDA II WM 2003 SE Upgrade.
Upgrade was unsuccesful; upon turning on the XDA there are only two things on the screen; near the top, it says 'Serial", and near the bottom, "v 1.06".
The xda will not respond to hard resets nor soft resets. What can I do to recover from this disaster? When cradled, it will not connect via usb to activesync.
If this is not user servicable, does anyone know a good place in Melbourne, Australia to fix the himalaya?
Any help is appreciated!
When it's docked in the cradle, does SERIAL change to USB?
Try this:
Take out the memory card (if you have one) and the battery. Not sure why the memory card, but mine had problems with it in when I tried to upgrade.
Wait 30 mins or so for the battery backup to flatten/wipe everything (You loose everything on a ROM upgrade anyway)
then plug the battery back in and recradle it and simply try starting the flash again.
I've had similar problems, but this has always worked here and we have different devices, but I feel confident that the same solution may work.
had the same problem... my solution was docking it in the cradle (it does not show connected) and reinstall the ROM
Failed upgrade of XDAII
Hello I was in the process of updating my XDA rom and after 50% was copied to the device it dropped out.
Now when I power on the XDA it hangs on the O2 screen and my rom flash program cannot talk to it.
I have tried taking the battery out and leaving it for an hour but this has no effect.
Any ideas?
Installing rom from the SD card on boot
Is it possible to do this and if so how would I go about it?
If I cant get an OS on it its going to have to go away for repair for 3 weeks.
Also have you done a few upgrades on your XDA2 and on the same PC?
I had the same issue with my XDA2 as I was upgrading to 2003SE (before getting a 2i) and I could not get any further than the USB 1.01 screen.
I installed Activesync on a laptop, put the USB in and put my 2i in to complete the installation. Then, I put the 2 in and tried rerunning the upgrade...worked first time! I'd spent 6 hours on my PC trying to get it working.
Worth a try, certainly!
Cheers
Anthony
screen shows USB at the top and v1.06 at the bottom. HELP !!
screen shows USB at the top and v1.06 at the bottom. HELP !!
Hello everyone. I am new to this forum thing. I bought a 02 XDA 2 on Ebay last week. I tried to upgrade ROM to English from Chinese and now my screen is dead and no link to Microsoft ActivieSync.
Is my unit dead ??
Please help !!
forgot to mention that I tried the things posted earlier !
I tried taking battery out for 1/2 hour and then the hard reset. Still nothing
Help !!!!
My wife is going to kill me because I just bought this XDA 2 and now it is dead ! (like me soon !)
disastrous xda upgrade
try consulting dr. stein or toenailed or xda jojo and zeroxtreme. these are the tech guys in southeast asia. they're very good! :lol:
Have you tried rebooting into Bootloader mode (hold down D pad in centre position, then power button and soft reset - all at the same time), then trying to rerun the upgrade?
Re: screen shows USB at the top and v1.06 at the bottom. HEL
maij said:
screen shows USB at the top and v1.06 at the bottom. HELP !!
Hello everyone. I am new to this forum thing. I bought a 02 XDA 2 on Ebay last week. I tried to upgrade ROM to English from Chinese and now my screen is dead and no link to Microsoft ActivieSync.
Is my unit dead ??
Please help !!
Click to expand...
Click to collapse
When you started the upgrade did all seem to go as planned? Did you have the power cable plugged in whilst upgrading? Did you notice any strange messages when it started to upgrade, and how far roughly did it get before you started having problems?
Also, what was the software version before you upgraded? Any ideas?
Cheers
Anthony
Hi Anthony: Everything seem to be going ok and then..
the screen went blank. I did have the AC plugged in during the attempted ROM conversion from Chinese to English and I tried rebooting into bootloader mode and nothing.
Do you think my 02 XDA2 can be fixed ?
Thanks
downgrade XDAII failure
Pals ,
I also facing the same problems , now my XDA II is blanked and only
Serial and V1.06 written ,
can anyone in this forum help ? please eeee ?
thanks
if the screen shows you something like serial1.something you're still okay. do a couple of hard resets; then put the unit back on the cradle. as expected activesync will not recognize the device BUT double click the upgrade file again.
this happened to me when i went to wm2003se; forgot to do a soft reset and proceeded with the upgrade. what i did was uncradled the unit, did a hard reset (screen still showed serial1.06), cradled her back (nothing happens here) then doubled clicked on the upgrade file. it proceeded accordingly until the entire process was completed.
dont' fret, as long as something's still showing on your screen you're still a-ok.
Thanks Robs..
I will try...
Yeah, after hard-resetting the unit, it seems that it did not reset because the serial/usb letters & v1.07 at the bottom of the screen is still there. But if you drain the battery, then put it back in the cradle & restart the ROM upgrade, it will work. At least it did for me.
As I've also said but seems to have been ignored, try running the upgrade on a different PC...you may be surprised!
Cheers
Ant
thanks Anton ...
I tried so many times in my pc until the sync wont work anymore , so i tried to do at my laptop ... still same .... should i change to another pc again ? pls advice , thanks man.
Dear O2inCN
what is the best way to drain the batt ?
this morning I tried to use the batt in my other XDAII device until dropped to 6%, then i unplug it , and after 1 hour later I begin to plug it into my problem XDA II ( sorry, I had 2 devices XDA II ) , now i restarting the downgrading process again, its already half hour , Still CHECKING THE INFORMATION ON POCKET PC ... what went wrong ?
is it stucked or the batt is charging firstly ? thanks ....
Re: Dear O2inCN
sbudiarta said:
what is the best way to drain the batt ?
this morning I tried to use the batt in my other XDAII device until dropped to 6%, then i unplug it , and after 1 hour later I begin to plug it into my problem XDA II ( sorry, I had 2 devices XDA II ) , now i restarting the downgrading process again, its already half hour , Still CHECKING THE INFORMATION ON POCKET PC ... what went wrong ?
is it stucked or the batt is charging firstly ? thanks ....
Click to expand...
Click to collapse
Hi, did you manage to downgrade to WM2003? Was your bootloader version 1.06? I had problem in downgrading from WM2003SE. Hope to hear from you. thanks.
Dear all,
I am new to the XDA phone >o<...recently, I had O2 XDA phone which I tried to go to the boot - loader menu (power on + reset)
and now I could manage to go back to normal startup...
is there any expert here could kindly advise me what to do ??
many thanks
Just do a reset....
Stefan
thx for the reply...
i press the reset button and I can only hear a "Click" tone from the phone and the screen still doesn't show up
The only way to make the screen showing up is by pressing reset and power button together (but it brings me to the boot-loader screen)
>_< crying
Maybe your ROM is defect.
Try flashing a new ROM on the device....
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Stefan
Hi,
have you sorted this one out? I have bought one and have the same problem - when I do hard reset, Wallaby boots and diagnostics is shown. All tests work. When I do soft reset, backlight of Yes and No buttons is on for a while but nothing is on the display and Wallaby just makes some very short sound. Then nothing, no Windows in the house. Anyone has an idea? Thanks.
// edit:
I have made some progress: while in the state when the display shows nothing and backlight of buttons is on, the device, while in cradle, is able to be connected to with activesync. Hope I have specified the problem little bit more.
o2 xda neo 2.15.4.29.GER rom
hi,
my O2 xda neo cannot start up and,
i look for o2 xda neo 2.15.4.29.GER rom.
is there anybody who know where i can find it?
please help.
thanks already now...
Re: o2 xda neo 2.15.4.29.GER rom
junk_dealer said:
hi,
my O2 xda neo cannot start up and,
i look for o2 xda neo 2.15.4.29.GER rom.
is there anybody who know where i can find it?
please help.
thanks already now...
Click to expand...
Click to collapse
Wrong Forum, cause it´s not a Wallaby device....
But Try this one, hope it´s te right one.....
http://www.o2online.de/o2/kunden/technikundeinst/exclusive/xda/xdaneo/update/xda-neo-update.exe
Version 2150429_21504115_02921 (ca. 51,3 MB)
Stefan
hello friend
Can I ask you'll with my problem. first i confuse my cousin xda wallaby cann't boot to os, the O2 logo doesnt appears the device only appears like television that don't have channel and if i press power and softreset it came up with red, green. blue and wallaby bootloader v5.17, gsm ok. can you tell me what the problem with it?
Thank You
Looks like your device have no, or a corrupt ROM.
Try reflashing it via SD-Card.....
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Stefan
Hi Mods and all
I am new in this forum .... and new with PDA in general ,.. although i have experience in regular cell phones ,,,
I have come up with an issue that i need help with from you guys who seem to be experts...
I have an XDA Atom which turns on upto O2 screen and freezez right there .. i tried to hard reset the phone but failed..
When i press power on and reset button .. screen asks me to press green and red key when i do it says clean boot .. and than do u want to reset your phone ? and than after that i tried to press all keys but nothing happens ,,,
I dont know wht is the problem but i think or assume that i have lost bootloader and or Rom ,,, Please help with this part
Also what tools do i use to flash what i have to flash as the PDA cannot connect with the USB becuase it is not turning on ,,, Please help with this part
Also what do i need to flash to this phone to revive it ,,,? please help with this issue ,, and where can ii download this files ,,
please explain step by step and or direct me to a link where i can geet this information
thank u in advance ,,,
Mike
Thanks for not replying ... but finally i managed ..downloaded the latest version of ROM and put the phone in flash mode by holding camera and reset key at the same time and flashed it ,,
make sure Battery is full ..
Now phone working just fine ..posted this for some other newbie like me
regards
mike
Drat. Got to this one too late. Sorry
Anyways, the Atom does have the tendency to lose track of its own extended ROM (You can actually see this happening if you use the WM5 hidden storage revealer - which ironically happens to cause the problem sometimes as well).
Symptoms include:
- A phracking long boot time (>7 minutes, seems to hang)
- Screen goes out of alignment
- Camera, Autoconfig, Equalizer don't work.
- Hard reset doesn't help.
- EXTROM info is missing from device settings (shows as blank) - tho sometimes the device works without this anyhoo.
- CMOS version is also missing (the device definitely won't work in this case)
Probable cause:
- Someone or something just tried to write to your hidden storage root. (Eh?)
Far as I know there's no method to recover other than flashing your phone again. Just one of the design flaws of the Atom, I guess...
(Yes, I feel for you. I had to solve this myself too, and I didn't want to send it in. Thankfully, this isn't a common problem. )
I've just downloaded the latest Rom from seeo2.com hongkong and I had the very same problem.
My XDA Atom Exec is frozen at the O2 screen.
mun66, if you read this, could you explain how you fixed it?
thanks.
mun66 said:
Thanks for not replying ... but finally i managed ..downloaded the latest version of ROM and put the phone in flash mode by holding camera and reset key at the same time and flashed it ,,
make sure Battery is full ..
Now phone working just fine ..posted this for some other newbie like me
regards
mike
Click to expand...
Click to collapse
would you plz tell here which rom u used for this ????????
Well, my Atom Exec will do the same sometimes.
But the following method works everytime!!!
Take out the battery. Charge it with a charger until full !!!!
Put it back to the machine, it works every time !!!
Or you may try just charge it in the machine for a few hours and see if that works. Since I always have a spare battery charged, every time that dumb thing stuck, I just changed the battery and it waked up again.
mun66 said:
Thanks for not replying ... but finally i managed ..downloaded the latest version of ROM and put the phone in flash mode by holding camera and reset key at the same time and flashed it ,,
make sure Battery is full ..
Now phone working just fine ..posted this for some other newbie like me
regards
mike
Click to expand...
Click to collapse
Hi mun66;
I've got the same problem with my Atom. But I dont know how to flash the phone like what you mentioned. Could you plz show me step by step??
Thanks,
Your ATOM Exec
edunon said:
I've just downloaded the latest Rom from seeo2.com hongkong and I had the very same problem.
My XDA Atom Exec is frozen at the O2 screen.
mun66, if you read this, could you explain how you fixed it?
thanks.
Click to expand...
Click to collapse
You guys just need to go into bootloader mode before performing an upgrade. For the XDA Atom just press Power+Dpad(center)+stylus reset momentarily, and its now in bootloader mode. RUN again the Update program. If you still experience the same thing, the update file you downloaded might be corrupted. You have to download again and flash your device again.
Mine is still stucked in O2 though done all of the above ways,
got the new ROM and flash it, but still stuck in it.
PLS HELP ME GUYS!!!
wilak81 said:
Mine is still stucked in O2 though done all of the above ways,
got the new ROM and flash it, but still stuck in it.
PLS HELP ME GUYS!!!
Click to expand...
Click to collapse
You might want to send it in the the service centre for a check, just in case it's a hardware problem.. If you still face the same issue even without installing any software..
That's probably a good idea, but i'd like to try some tricks on many threads before.
And also I've heard that O2 service center are not cool
wilak81 said:
That's probably a good idea, but i'd like to try some tricks on many threads before.
And also I've heard that O2 service center are not cool
Click to expand...
Click to collapse
Do keep us posted..
I will face the same problem if i install too much programs.. I guess it's either Pocket Plus, Diary 2 which is causing my problem.. Now wondering if i should change to Atom Life, since they announce WM6... If only there's a perfect phone.
Thank God, it's working after 5x flashing but it still had bug.
I still have to take the battery off for at least 15 minutes if I try to reset the Atom.
Sure 1 thing for ATOM, IT SU**S!!!
i have a friend also has a trouble like this ,but he has solved the problem when he charged the exec. do not you have a try ?
I just picked up one of these to play with.
Mine gets by the O2 screen but if I have a few apps on it it loads the Today screen but then freezes and won't let me access anything either by hard key or screen. Soft reset just repeats the cycle.
This is with only around 4 apps loaded. One of them must be a culprit?
By the way, it came shipped with WM6.0 (ROM: WWE_RC2170507B2).