Please help! I have a Softbank HTC Tytn and just came across this amazing forum today. I'm a techno-literate person so this is even more frustrating... I simply cannot get Activesync (or my laptop for that matter) to recognize my Tytn...
When connected via USB it appears under Network Adaptors in my Device Manager as "Windows Mobile-based Device #3" and has the ! because it has no drivers.
I'm using Activesync 4.2 worldwide English version downloaded from the Microsoft site.
Please help me, I became very excited at the prospect of unlocking this awesome phone but then was crushed to find I couldn't even begin the first step!
I have the USB cable plugged directly into the laptop, not via a passthru like a hub, and I have tried it in multiple ports without success.
Save me guys, please!
Perhaps my problem is that I don't have a driver for the device that allows Windows XP to recognize it?
Could someone please post a link, or the file itself, of the driver you use for your HTC?
You should not need any special drivers just for activesync or usb-serial connections to the device.
Drivers are only needed if you want to use it as a modem.
then has anyone else had this problem? do you have any suggestions pof? this is driving me nuts...
Shaderach said:
then has anyone else had this problem?
Click to expand...
Click to collapse
Never heared before.
Shaderach said:
do you have any suggestions pof? this is driving me nuts...
Click to expand...
Click to collapse
Disable activesync if it is connected, put the device in bootloader mode and try to connect to it using mtty. If you get the "USB>" prompt you can do everything, you don't need activesync at all for unlocking or flashing roms, everything can be started with the device in bootloader mode.
if it sheds any light on the problem, when i plug it in instead of the usual "do-doo" rising intonation sound you get with a successful USB interface, i get a "duhduhduh" meaning it's connected, but not recognized...
ok i'll try that, sorry i wasn't aware that getting activesync to work wasn't a prerequisite for the other steps
i've never felt so stupid
i've downloaded mtty, and read and reread the wiki
my hermes is in bootloader mode, and mtty connects on port 3 but i don't get a USB> prompt, i just get a window named "COM3 115200 N-8-1" and a nice empty white space
i have no idea what to do now
i was planning on following this seemingly effortless writeup/summary by okinz:
http://forum.xda-developers.com/showthread.php?t=280566&page=9
but now i've got nothing.
i'm really sorry to bother you, but please don't give up on me!
i cannot make a connection using USB with mtty btw... forgot to include that
1) dumb question: did you select "USB" on mtty drop down list?
2) Do you have another computer where you can try?
3) Which windows version are you using?
pof said:
1) dumb question: did you select "USB" on mtty drop down list?
2) Do you have another computer where you can try?
3) Which windows version are you using?
Click to expand...
Click to collapse
1) yes, no connection
2) i just tried just plugging in the Tytn on my roommate's laptop, he got a different usb message, windows recognized it as a "Generic NDIS device" but failed to install it for lack of driver, is this what is supposed to happen? mine doesn't do this at all
3) windows XP SP2
update - just rebooted for about the 10th time and this time it recognized it as an NDIS and activesync has found it
i guess it was just a windows thing... *shrugs* i'll post again once i've tried the next steps
thank you pof, thank you very very much for sticking with me
Shaderach said:
thank you pof, thank you very very much for sticking with me
Click to expand...
Click to collapse
no problem
glad you solved the issue
i just want to let you know that i've got everything working and fully converted now
please close this thread, and know that everyone here has my heartfelt thanks
Related
ive just got hold of a M3100, and im trying to unlock it and wm6 it and all that, i get so far then it tell me driver wceusbsh.sys is missing? any idea where what how etc?
ive had a wizard up until now and ive never had any issues with this?
ive done a search but doesnt throw up any answers i understand?
oh ive got as 4.5 and running XP
cheers
fil said:
ive just got hold of a M3100, and im trying to unlock it and wm6 it and all that, i get so far then it tell me driver wceusbsh.sys is missing? any idea where what how etc?
ive had a wizard up until now and ive never had any issues with this?
ive done a search but doesnt throw up any answers i understand?
oh ive got as 4.5 and running XP
cheers
Click to expand...
Click to collapse
It really isn't necessary to CID unlock your hermes device any longer, the wrappers for most roms here us SSPL which effectively bypasses the CID check.
Though I suggest you install Hard SPL before you start actual flashing, this will make your device recoverable in most cases if you have a bad flash or something goes wrong.
Is the driver missing on your device or on your PC? If it's the PC I would just re-install AS 4.5 on the PC. Then for good measure reboot both your phone and the PC before you connect again.
Zzan said:
Is the driver missing on your device or on your PC? If it's the PC I would just re-install AS 4.5 on the PC. Then for good measure reboot both your phone and the PC before you connect again.
Click to expand...
Click to collapse
wceusbsh.sys is the Serial over USB driver used by ActiveSync - it lives in \Program Files\Microsoft Activesync\Drivers; sounds like it didn't get installed properly when you installed Activesync 4.5 on your PC.
I agree with @Zzan - you need to re-install....but I think a bit more than that is needed, so here goes...
1. Uninstall Activesync 4.5 from Control Panel | Add/Remove Programs
2. Reboot your PC
3. Check to make sure \Program Files\Microsoft Activesync no longer exists - delete it if it's still there.
4. Make sure your phone is NOT connected to your PC and re-install Activesync 4.5
5. Reboot your PC (sorry if this is a bit tedious )
6. Connect your phone directly to a USB port on your PC, NOT VIA A USB HUB!!!
7. Activesync should now detect your phone and start the "Create new partnetship" wizard.
If this procedure fails to solve the problem, then you'll probably need to get involved with removing the "USB Hub" in Device Manager and have XP redetect it after a reboot....not nice, so fingers crossed the above works
HTH,
Mark.
deleted and re installed AS 4.5 and its all working ok, cheers people
Hi.
I am a bit embarrassed about writing this, I never thought I would make a brick of my Prophet during “upgrades”...
But here I am, with a phone that don't want to sync with any computer after I accidentally pressed cancel on an active sync dialog box asking for setup with a new device, during upgrade to the latest Touch VIII. Have upgraded several times with several different ROM’s before, but this time things went wrong.
If I choose to start my device normally, it goes trough the HTC screen and stops after the Qtek (HTC in Norway) screen listing the different versions of the hardware…
When I restart to boot loader (Cam button + reset) the 3 colours turn up ok, but when I put an USB cable in the device and the lower, left part of the screen shows USB, active sync will not recognise any new device no matter what I do.
I can still find the Prophet when I go to properties on the computer, but somehow active sync does not care about that.
Are there any way to use a program at the host computer to sync properly with the Prophet?
I would really appreciate any help that could rectify this problem.
Regards, Lars Norway
I believe the " WM6 Upgrade Guide" thread has the info you needed.
panda88 said:
I believe the " WM6 Upgrade Guide" thread has the info you needed.
Click to expand...
Click to collapse
Tried the info there without success...
The guide assumes that you have connection with ActiveSync, but I can not seem to get connection.
So, I really need some advice about how to make a connection to the computer I will make the programming from, when ActiveSync is not working properly.
Have tried to restart both the device and the host computer, have reinstalled ActiveSync, have tried to start the different roms without having a connection to A.S., but no luck...
Have realized my mistake and bought a new Prophet, but would still like to get the old one working again.
it has nothing to do with activesync.
Not sure u really understand the below statement from the thread I mentioned.
RECOVERING FROM ERROR IN STEP 8 WM5->WM6
1. Don't panic
2. Don't panic
3. Unplug the phone
4. Reset with stylus,and keep the Camera Button pressed.
5. A 3 color screen will appear(Bootloader Screen)
6. Connect your device with your PC,and run the NVID(no vendor) WM5 rom.
7. The device will be resetted after RUU(rom update utility)finishes
8. Repeat the WM6 upgrade,from STEP 5..
in case you can't NVID roms, you can still use those step1 roms mentioned by ROM gurus here.
panda88 said:
6. Connect your device with your PC,and run the NVID(no vendor) WM5 rom.
Click to expand...
Click to collapse
Well, the problem is that I am not able to connect...
As far as I understand, the only way to connect is by using ActiveSync?
Regards
connect = the cable between prophet and your pc. after that just run the rom update utility. just dun bother the activesync (does it sound logical to u to establish activesync in bootloader mode?)
OK, I have tried it, but will try on some different computers also.
Posting in a couple of hours.
Thanks for your help so far!
then wish u good luck. happy un-bricking.
OK, same as before.
Depending on which ROM I try, the following messages are the result:
Error [300]: Invalid update tool.
Error [274]: Connection (The update utillity cannot connect to your PDA phone.)
If I try the Touch VIII direct, it stops in Initializing for a while, and then a message appears with the text: Cannot connect to device, Would I like to try again?
Besides, in the welcome screen during the "ROMUpdateUtility_NV_G4.exe" in the Prophet_PV_Temp program, step nr. 2. asks me to ""Establish an ActiceSync connection with your PDA phone."
So, no change from yesterday yet...
are you using windows vistA???
Have only been using computer with XP Pro installed.
Anybody of the opinion that the connection tools built into Vista might do a better job?
hifiasylum said:
Have only been using computer with XP Pro installed.
Anybody of the opinion that the connection tools built into Vista might do a better job?
Click to expand...
Click to collapse
No, on the contrary. The best change you have is XP. Zeroed asked about Vista because it could be the reason of your troubles.
What I should do is just one detail different of what you have already tried:
Put the prophet in bootloader.
DISable "allow USB conection" in the conection-setting panel of ActiveSync
Connect your prophet with the USB cable
Run the NVID RUU again
If that is succesfull, you can upgrade to the WM6 ROM you like.
OK, will do.
Tried Vista just now, same errors and no luck.
Be posting in a minute...
OK, now I'm back.
Made a restart of the host computer, changed settings in ActiveSync, startet my device in Bootloader...
But unfortunately, no more success this time either.
Feel that the device must be more seriously defective/broken than others, this mishap happend at the end of the programming, when the 3 partitions were being written in the device. I was loading Touch VIII...
Anybody know if there is any more combination of buttons or reset methodes I could try?
Next step is to start opening the Prophet...
hifiasylum said:
OK, now I'm back.
Made a restart of the host computer, changed settings in ActiveSync, startet my device in Bootloader...
But unfortunately, no more success this time either.
Feel that the device must be more seriously defective/broken than others, this mishap happend at the end of the programming, when the 3 partitions were being written in the device. I was loading Touch VIII...
Anybody know if there is any more combination of buttons or reset methodes I could try?
Next step is to start opening the Prophet...
Click to expand...
Click to collapse
Sorry, I'm out of options...
OK.
Thanks again for all help and support.
Really appreciated!
Regards, Lars
hifiasylum said:
OK.
Thanks again for all help and support.
Really appreciated!
Regards, Lars
Click to expand...
Click to collapse
Just wondering if your computer detects prophet as a device at all? Does the normal plug device sound comes on when you plug in? Just a long shot, stick in a SD card and try with windows media player to see if it can sync or put files onto SD card. if so, get rom refreshed via SD card...
try few hard resets before you try this.
Not quite sure I understood what you suggested. I can get the device up in the host computers machine properties, but there is no way to get it up in any other program - like the Windows explorer.
Or are you saying that there is a way to boot the Prophet directly from a SD card? That would impress me!!!
hifiasylum said:
Not quite sure I understood what you suggested. I can get the device up in the host computers machine properties, but there is no way to get it up in any other program - like the Windows explorer.
Or are you saying that there is a way to boot the Prophet directly from a SD card? That would impress me!!!
Click to expand...
Click to collapse
This sounds dumb, but try restarting your PC, closing all apps running in background (including firewalls), restarting Prophet (with stylus in reset hole). DO NOT TRY TO USE ACTIVE SYNC. Boot into bootloader (Three colours screen), connect USB cable and flash QTEK lastest official, or Jesterz AKU 3.3 (I have found this ROM to have magical powers of unbricking.)
Good luck!
hifiasylum said:
OK.
Thanks again for all help and support.
Really appreciated!
Regards, Lars
Click to expand...
Click to collapse
Hmm this is wierd.I ran into problem earlier this month trying to flash a ROM but got stuck somewhere. So I followed the steps given in the sticky thread. Everything work smoothly. I am using XP SP2 and mine is a G3.
Let's make the assumption that your PDA is not faulty. Maybe you can try the steps again but this time :-
1. Change to another USB cable (or you may test the existing cable by connecting to a working pda)
2. Change to another USB port
3. Make sure you are not running any program that hogs the USB resource
4. If you are using USB hub, please don't connect using it. Make a direct connection to your computer.
that's all I can offer now...hope it helps.
hi
guys i am newbie in upgrading and tried to run athena wraper and it died and after searching forums i still cant find cure ok so here it is i can do hard reset but it dosent help no boot up it still gives me ring round joystick good news is i can get it to bootloader screen (or at least thats what i think ) its red green blue and white screen with usb or serial (depending on cable )
screen reads
ATHE100
IPL-V0.90
ATHE100
SLP-V1.20.Olipro
now can any one help me ??
how can i upgrade rom with out device being detected by active sync every time i run upgrade utility it just comes up with connection error
still no luck
hi
still no luck
do i need special drivres to detect device if its in bootloader ?
it dosent show any thing in device manager when i connect it while its in boot loader
on running upgrade utility it comes back with error 260 connection error saying cannot find device (i am stuck in bootloader)
any advices ??
please help !!!!
The fact that you can still enter the bootloader means that it is not bricked, so first advice would be, as is so well presented in the Hitchhicker's Guide to the Galaxy, "Don't Panic".
Enter bootloader without any SD Card or SIM left in the Athena.
Then, plug it to the USB port, and see if it goes from "serial" to "usb".
Then try to flash first the Black Dual PK ROM available on the forum (in the WM6 section), or an official ROM available from the Wiki, for instance.
hi
tried to flash it with both and came out with same error
260 connection cant find device
and i cant even see any changes in devicemanager but it dose goes serial to usb when i connect
and my pc is not detecting the device (just like that depressed robot from hich hikers guide to galaxy )
Do you have Windows XP or Vista ?
Ecraseur said:
Do you have Windows XP or Vista ?
Click to expand...
Click to collapse
xp (pc i am trying to upgrade i also have vista on other pc which i havent tried yet should i try that ?)
nop no luck in vista ether same error still no connection
both pc have netframework 2
activesync in xp and mobiledevice center in vista
but after connecting device nothing happens in device manager there is no new device
(could it be beacouse of faulty cable? )\\(noi have tryed 2 different cable )
is it worth getting cradle ??
No no. I think the problem comes from the flash utility that requires that the Athena be detected prior to flashing.
I know that with the Universal, some flashing utilities could force flashing when connecting the device already in bootloader mode...
So there must be an easy way to bypass the device detection and go on with the flash process. I'll try and find out, and maybe one of the gurus will cruise by and find it for ya in the meantime.
In the meantime, don't freak out and be patient. Your Athena's not bricked, probably the ROM that's screwed up. We only need to find a way to do that exclusively from the bootloader (chich I know is possible, that's the whole point of the bootloader ).
vijay5264 said:
nop no luck in vista ether same error still no connection
both pc have netframework 2
activesync in xp and mobiledevice center in vista
but after connecting device nothing happens in device manager there is no new device
(could it be beacouse of faulty cable? )\\(noi have tryed 2 different cable )
is it worth getting cradle ??
Click to expand...
Click to collapse
Hi
Try a hard reset ( Volume down+reset) and then get into the boot loader(Camera+reset~10seconds) then flash the PK dual rom. Don't panic, Your athena is hard spl patched therefore not bricked. If that not works down load the exact official rom for your device flash that then flash the PK dual rom. try Redownload the rom again.
Good luck
HeartOfDarkness said:
No no. I think the problem comes from the flash utility that requires that the Athena be detected prior to flashing.
I know that with the Universal, some flashing utilities could force flashing when connecting the device already in bootloader mode...
So there must be an easy way to bypass the device detection and go on with the flash process. I'll try and find out, and maybe one of the gurus will cruise by and find it for ya in the meantime.
In the meantime, don't freak out and be patient. Your Athena's not bricked, probably the ROM that's screwed up. We only need to find a way to do that exclusively from the bootloader (chich I know is possible, that's the whole point of the bootloader ).
Click to expand...
Click to collapse
hi
thankes i think u understood the problem it is utility which fails before even starting beacouse of no connection see if u can find any thing
and yes i tryed hard reset and then tryed to flash with project black rom and i have downloaded latest t mobile rom from oficeal website but as i said before it fails with connection error it starts up and box says ''verifying information on your pda fone please wait'' and minut later it comes up with error 260 connection error '' please check following
1 your pdafone is connected to usb cable /cradle
2 usb cable connected to pc
(wich is basicly same if you try to nrun upgrade with out connectind pda )
(and yes i have tryed it with 2 different cables and it dose change from serial to usb)
some ting intrestin i foun in orignal update utility faq
ERROR [260] : CONNECTION
This error occurs when there is an “open port error” before upgrading the CE ROM image.
Solution: You can reset the device and run RUU again. If you still encounter an “OPEN PORT ERROR” again, reset your computer and try again.
is possible because device is in bootloader ?
or am i doing some ting wrong?
Reboot your PC, make sure you are not using a USB hub, try it with each USB port on the PC.
Pantaloonie said:
Reboot your PC, make sure you are not using a USB hub, try it with each USB port on the PC.
Click to expand...
Click to collapse
good idea but dident work after 4 on board ports and 2 hub ports no joy at all
by looks of it upgrade utility is trying to read info from my device and could be failing for 2 reasons
1 it is not detecting device
2 info in pda is corrupted and could not get any info from device
well thats my theory but not really sure any suggestions??
Is your PC running XP or Vista? I got the impression reading the post that XP machine works better in unlocking. I think the info was posted by Olipro himself if my memory is right.
eaglesteve said:
Is your PC running XP or Vista? I got the impression reading the post that XP machine works better in unlocking. I think the info was posted by Olipro himself if my memory is right.
Click to expand...
Click to collapse
it is running xp the one i am working on now (i do have 2nd pc running vista 64 bit )
but i am doing unlocking in xp
all i want to find out is dose device needs any drivers or dose it gets detected if device is in bootloader ?
if thats the the case i dont see any new devices in xp devicemanager
No no, it doesn't. Couldn't find it for Athena, but don't have much time lately, alas.
Maybe you should PM one of the gurus asking how to flash a ROM straight from bootloader without having the device detected by WinXP. I believe there's a small, easy manipulation to make, but can't remember it for the life of me. :-S
HeartOfDarkness said:
No no, it doesn't. Couldn't find it for Athena, but don't have much time lately, alas.
Maybe you should PM one of the gurus asking how to flash a ROM straight from bootloader without having the device detected by WinXP. I believe there's a small, easy manipulation to make, but can't remember it for the life of me. :-S
Click to expand...
Click to collapse
i found this in wiki and first three posts are empty but followed the procedure and downloaded all three roms and still no joy error
''Problems using the Athena Unlocker - the Black Screen of Death
Using The Athena Unlocker tool (developed by Olipro) is a 3-stage process. Most users get through the first stage but as they start stage 2, get a black screen where their device becomes unresponsive and so cannot proceed with the unlocking. See these posts
http://forum.xda-developers.com/show...&postcount=169 or http://forum.xda-developers.com/show...&postcount=176 or http://forum.xda-developers.com/show...&postcount=226
It is always recommended that you first take out your MiniSD card. You can then follow the instructions below.
* Get one of the ROMs in this link and extract it http://forum.xda-developers.com/showthread.php?t=314672
* Get your device into bootloader (the three-colour screen; You can get there by pressing the Camera key + Volume key + Soft Reset at the same time)
* Connect your device to your PC (even if the PC shows no sign of recognising it, it does) and the SERIAL shown on the screen of your device will change to USB)
* Hit the ROM Upgrade Utility and upgrade your device.
* Once the upgrade is completed, configure your device (Calibrate screen, set time zone, etc).
* Now continue with the Unlocker, to the end.
It is important to complete the unlocker to the end or else you will miss out on flashing your radio, with a common symptom of your gps not working.
Good Luck and enjoy your improved device!
''
now i am still stuck will it make any difference if i try it in different xp pc other then the one i started the process ?(and screwed it up)
Please ensure all software firewall or IP filtering apps are turned off then reboot the PC. After rebooting, confirm the apps are not running and blocking anything. If you are unsure, then try it from a freshly installed XP.
Put the device in Bootloader mode and try it again.
lpsi2000 said:
Please ensure all software firewall or IP filtering apps are turned off then reboot the PC. After rebooting, confirm the apps are not running and blocking anything. If you are unsure, then try it from a freshly installed XP.
Put the device in Bootloader mode and try it again.
Click to expand...
Click to collapse
good idea
i have already tryed with firewalls and virus protection off but doing it in fresh xp might just work small question do i need to install active sync or is it not needed (any way ill try both first without and then with )
ill report back in about 3 hours (i know i am sad and havent got a life but its worth a try )
Yes, the wiki confirms what I thought but didn't voice out loud as yet (I was sure about it for the Universal, but not for the Athena): the upgrade utility doesn't *require* that it be Activesynced. That's, as I'd said, te whole point of the bootloader.
If you still have problems uploading the new ROM to your Athena after following the wiki thing, then it *does* mean that there is some external factor playing dirty, so the firewall to check (and some anti-virus software also scan network connections) indeed is a good idea.
Keep us posted, and I'm keeping my fingers crossed.
Hi.
first, sorry about my english, im from mexico =)
I have a Htc Titan
Rom: NueRom 6152-3pre3
Radio: 3.42.30
Carrier: Iusacell
Im on a Hp dv2000 Windows Vista 32 bits.
The problem that i have is that i cant conect my titan to USB.
When i connect it to the computer charges the battery phone but my computer didnt recognize it.
I tried on diferent computers, win xp and vista and nothing happends.
So i read all the threads about the aGps and QPST. and i coudnt connect my phone to QPST for making the agps trick.
Also i tried to connect to QPST by bluetooth and also nothing happends.
Also i tried all the HTC modem drives and allways i had the same error (10)
can someone help me please
Thx!
sometimes i just unplug and try again over and over, sometimes it takes up to five times, sometimes i even reboot my pc.... try that y arriba mexico ca.....nijos
i tried that and nothing happends =(
when i go to bootloader mode my computer recognize it as an unknow usb divice.
on settings>connection> USB TO PC i tried endable and disable the advance network functionality and nothing happend.
also i tried to relock the phone and put my custom rom (alltel) and also nothing happend..
do i need to change something on the phone?
Please help me ! =)!
Thx.
Did you get dmrouter to start? Have you installed the drivers? I just assume you have followed the first steps of the wiki.
Do you have data and phone, and all functions working? Does IUSAcell even support or have aGPS server? Are you trying to use another carriers aGPS settings?
kdj67f said:
Did you get dmrouter to start? Have you installed the drivers? I just assume you have followed the first steps of the wiki.
Do you have data and phone, and all functions working? Does IUSAcell even support or have aGPS server? Are you trying to use another carriers aGPS settings?
Click to expand...
Click to collapse
Yes, i tried on dmrouter and nothing happend, i have the drivers.
Yes, i have data adn phone, evreything works fine.
Iusacell support aGPS im 100% sure of that.
Do you have any recomendations on how can my computer will recognize my phone?
thx
If dmrouter started successfully, you have the wmodem drivers installed and qpst did not recognize your device and you followed all the directions in the GPS fix thread of your choice, There is nothing I can do for you. Sorry.
Do you have agps server info for iusacell? where is it posted?
kdj67f said:
If dmrouter started successfully, you have the wmodem drivers installed and qpst did not recognize your device and you followed all the directions in the GPS fix thread of your choice, There is nothing I can do for you. Sorry.
Do you have agps server info for iusacell? where is it posted?
Click to expand...
Click to collapse
I found it here
http://www.darkclockers.com/foros/showthread.php?t=7493
sorry but its in spanish, hope it works for you.
anyone can help me with my problem?? thx!!
One trick is to use a different USB port on the computer you are using. Also make sure that the computer has not added it in the Device Manager as an Unknown Device and placed a Yellow Exclamation point besides it. If so delete the item and then reboot.
Also, Im not so sure you really have the drivers installed.
You need to install microsoft activesync in order for your computer to have the right modem drivers.
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/activesync45.mspx
the computer dont recognize my phone, only on bootloader mode.=(
Have you tried to turn off Enable advanced network functionality? When I had issues with my computer seeing the phone, I unchecked this box and active sync would see the phone as well as I now could teather via USB.
Here is where to find Enable advanced network functionality:
Start/Settings/Connections/USB to PC/
Good luck
Re: QPST connection issue
shimele said:
Hi.
first, sorry about my english, im from mexico =)
I have a Htc Titan
Rom: NueRom 6152-3pre3
Radio: 3.42.30
Carrier: Iusacell
Im on a Hp dv2000 Windows Vista 32 bits.
The problem that i have is that i cant conect my titan to USB.
When i connect it to the computer charges the battery phone but my computer didnt recognize it.
I tried on diferent computers, win xp and vista and nothing happends.
So i read all the threads about the aGps and QPST. and i coudnt connect my phone to QPST for making the agps trick.
Also i tried to connect to QPST by bluetooth and also nothing happends.
Also i tried all the HTC modem drives and allways i had the same error (10)
can someone help me please
Thx!
Click to expand...
Click to collapse
Hi Shimele, give this a try. Go to device manager if using XP, should be same for Vista. Look for ports, expand it and you should see something new for your phone. Open up properties for it and then click on Advanced. You should see Port Settings and Advanced at the bottom. By default it may be a high port like com port 9, set it to com port 1 or com port 2. Then run QPST configuration and make sure it's listed in there. You may need to reseat your USB cable after making this change. Hope this helps you
thx all for you answares...
I think phone usb its broke, thats the only logical explanation.
I made my GPS lock in lees than 10 sec. so the usb its not a problem anymore.
I got GPS so fast because i change the radio to: 3.37.75
Thx!
Hola shimele.
I'm also in Mexico (DF) and using the exact config you're using (both laptop and Mogul in Iusacell). I've tried several DCD, Nue and generic roms and they sync with no problems for me.
So, let's start at the begining: you're using Vista, so make sure you've installed the Windows Mobile Device Center patch for Widows mobile. This replaces ActiveSync for Vista computers and can be downloaded here: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
Follow the instructions and you should be fine.
If you want us to follow this offline, I'm available, just PM me or send me an e-mail, OK?
Saludos.
as soon as i try and flash the HSPL or a ROM it disconnects me from my usb connection, ive made sure numerous times that it is synced up before i start the flashing but as soon as they start it automatically disconnects me and the flashing doesnt work. Ive tried switching usb ports on my comp and nothings worked.... any ideas????
enter bootloader manually, when on coloured screen connect usb, wait for word serial to change to usb, and dont forget to right click and 'run as administrator'
thank you that worked so far, also its asking me which HSPL verson to install....
2.08. HSPL? or 2.08.0000?
it says my installed version is 2.10.0000
fbstud said:
2.08. HSPL? or 2.08.0000?
Click to expand...
Click to collapse
go on, have a guess, , is it the one with HSPL in the version, or the one without?, , , , , , ,
2.08.0000 is for returning to stock, you want 2.08.hspl
My first post!
And that last one above there made me chuckle, alot!
Sorry for posting on something almost a month old but it's the closest thing I can find to my problem.
So I've figured out I need HSPL to do any flashing, so i figured HSPL3 would be a good choice?
I'm currently on my boot screen and it says i have SPL- 1.42.0000, but the word at the bottom will not change from Serial to USB. I've got the HSPL3_PKG ready to run as admin when it does, but no change at the moment
Thanks for the help
forgive the dumb question, but the usb cable IS plugged in to the phone AND the computer, right?
haha yeh.
im on a laptop, there are 3 USB ports and i've tried them all.
there is one thing, one time when my phone was plugged in it started the whole windows device driver software thing, and then it said that it failed. could that be causing some sort of usb connection problems with my phone?
thanks alot, I see you're very busy!
is it something to do with my stock rom that ive not seen mentioned anywhere
1.43.206.4 (70315) WWE
?
:S
no, not the rom, but yea, the drivers not installing is probably it. You need to make sure that windows mobile device center (or active sync if you are on xp) is the latest version.
what you can try is, (after you have made sure you're on the latest wmdc version of course) with the phone connected, call up device manager, (on vista/7 , right click my computer, choose properties, device manager should be an option down teh left) find the entry for the phone (probably called unknown device, or something) and right click it, and choose update driver.
been trying to get hold of a WMDC download all evening but i think i'm hitting some server problem their end.
just checked the version i have, is 6.1.6965 and i think it was 6.1 i was after so i guess ill try and hook it up like you said above, will let you know...
damn 'windows has determined that the driver software for your device is up to date' think i have a plagued HD2 :S
wait, just reread you r fisrt post again.
When you start to flash it DOES disconnect, its supposed to disconnect.
Try this, enter bootloader manually, connect the usb cable (ignore what does or doesnt happen on teh pc) on teh phone, does the word serial change to usb? if it does, run your flash.
EDIT - oh, lol, you arent the OP, and i just read post 1, lol, ignore.
apparently i am missing some driver, Qualcomm CDMA or something like that... trouble is that i cant get a hold of it, theres a few threads on xda that mention it but no solutions.
normally, when a comp is asking for qualcomm drivers, it indicates a problem. Mostly it is when a tmous has been bricked, but occasionally other people have reported it. There aren't any qualcomm drivers that we know of. (Well, theres a thread that is titled qualcomm drivers, and does indeed include what appear to be drivers, but they wont install on windows.)
If i were you id focus on trying to find another pc to try it on. That way you will know if its a pc problem or a phone problem.
good call, i think ill opt for the trusty XP, just need to find that old laptop...
hopfuly you won't be hearing from me for a while.
i read that XP is more stable for flashing off of cos its more blunt, what do you think?
well, its certainly seems to cause less problems, especially HSPL'ing.
Good luck, and goodnight.