Hi.
first, sorry about my english, im from mexico =)
I have a Htc Titan
Rom: NueRom 6152-3pre3
Radio: 3.42.30
Carrier: Iusacell
Im on a Hp dv2000 Windows Vista 32 bits.
The problem that i have is that i cant conect my titan to USB.
When i connect it to the computer charges the battery phone but my computer didnt recognize it.
I tried on diferent computers, win xp and vista and nothing happends.
So i read all the threads about the aGps and QPST. and i coudnt connect my phone to QPST for making the agps trick.
Also i tried to connect to QPST by bluetooth and also nothing happends.
Also i tried all the HTC modem drives and allways i had the same error (10)
can someone help me please
Thx!
sometimes i just unplug and try again over and over, sometimes it takes up to five times, sometimes i even reboot my pc.... try that y arriba mexico ca.....nijos
i tried that and nothing happends =(
when i go to bootloader mode my computer recognize it as an unknow usb divice.
on settings>connection> USB TO PC i tried endable and disable the advance network functionality and nothing happend.
also i tried to relock the phone and put my custom rom (alltel) and also nothing happend..
do i need to change something on the phone?
Please help me ! =)!
Thx.
Did you get dmrouter to start? Have you installed the drivers? I just assume you have followed the first steps of the wiki.
Do you have data and phone, and all functions working? Does IUSAcell even support or have aGPS server? Are you trying to use another carriers aGPS settings?
kdj67f said:
Did you get dmrouter to start? Have you installed the drivers? I just assume you have followed the first steps of the wiki.
Do you have data and phone, and all functions working? Does IUSAcell even support or have aGPS server? Are you trying to use another carriers aGPS settings?
Click to expand...
Click to collapse
Yes, i tried on dmrouter and nothing happend, i have the drivers.
Yes, i have data adn phone, evreything works fine.
Iusacell support aGPS im 100% sure of that.
Do you have any recomendations on how can my computer will recognize my phone?
thx
If dmrouter started successfully, you have the wmodem drivers installed and qpst did not recognize your device and you followed all the directions in the GPS fix thread of your choice, There is nothing I can do for you. Sorry.
Do you have agps server info for iusacell? where is it posted?
kdj67f said:
If dmrouter started successfully, you have the wmodem drivers installed and qpst did not recognize your device and you followed all the directions in the GPS fix thread of your choice, There is nothing I can do for you. Sorry.
Do you have agps server info for iusacell? where is it posted?
Click to expand...
Click to collapse
I found it here
http://www.darkclockers.com/foros/showthread.php?t=7493
sorry but its in spanish, hope it works for you.
anyone can help me with my problem?? thx!!
One trick is to use a different USB port on the computer you are using. Also make sure that the computer has not added it in the Device Manager as an Unknown Device and placed a Yellow Exclamation point besides it. If so delete the item and then reboot.
Also, Im not so sure you really have the drivers installed.
You need to install microsoft activesync in order for your computer to have the right modem drivers.
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/activesync45.mspx
the computer dont recognize my phone, only on bootloader mode.=(
Have you tried to turn off Enable advanced network functionality? When I had issues with my computer seeing the phone, I unchecked this box and active sync would see the phone as well as I now could teather via USB.
Here is where to find Enable advanced network functionality:
Start/Settings/Connections/USB to PC/
Good luck
Re: QPST connection issue
shimele said:
Hi.
first, sorry about my english, im from mexico =)
I have a Htc Titan
Rom: NueRom 6152-3pre3
Radio: 3.42.30
Carrier: Iusacell
Im on a Hp dv2000 Windows Vista 32 bits.
The problem that i have is that i cant conect my titan to USB.
When i connect it to the computer charges the battery phone but my computer didnt recognize it.
I tried on diferent computers, win xp and vista and nothing happends.
So i read all the threads about the aGps and QPST. and i coudnt connect my phone to QPST for making the agps trick.
Also i tried to connect to QPST by bluetooth and also nothing happends.
Also i tried all the HTC modem drives and allways i had the same error (10)
can someone help me please
Thx!
Click to expand...
Click to collapse
Hi Shimele, give this a try. Go to device manager if using XP, should be same for Vista. Look for ports, expand it and you should see something new for your phone. Open up properties for it and then click on Advanced. You should see Port Settings and Advanced at the bottom. By default it may be a high port like com port 9, set it to com port 1 or com port 2. Then run QPST configuration and make sure it's listed in there. You may need to reseat your USB cable after making this change. Hope this helps you
thx all for you answares...
I think phone usb its broke, thats the only logical explanation.
I made my GPS lock in lees than 10 sec. so the usb its not a problem anymore.
I got GPS so fast because i change the radio to: 3.37.75
Thx!
Hola shimele.
I'm also in Mexico (DF) and using the exact config you're using (both laptop and Mogul in Iusacell). I've tried several DCD, Nue and generic roms and they sync with no problems for me.
So, let's start at the begining: you're using Vista, so make sure you've installed the Windows Mobile Device Center patch for Widows mobile. This replaces ActiveSync for Vista computers and can be downloaded here: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
Follow the instructions and you should be fine.
If you want us to follow this offline, I'm available, just PM me or send me an e-mail, OK?
Saludos.
Related
Please help! I have a Softbank HTC Tytn and just came across this amazing forum today. I'm a techno-literate person so this is even more frustrating... I simply cannot get Activesync (or my laptop for that matter) to recognize my Tytn...
When connected via USB it appears under Network Adaptors in my Device Manager as "Windows Mobile-based Device #3" and has the ! because it has no drivers.
I'm using Activesync 4.2 worldwide English version downloaded from the Microsoft site.
Please help me, I became very excited at the prospect of unlocking this awesome phone but then was crushed to find I couldn't even begin the first step!
I have the USB cable plugged directly into the laptop, not via a passthru like a hub, and I have tried it in multiple ports without success.
Save me guys, please!
Perhaps my problem is that I don't have a driver for the device that allows Windows XP to recognize it?
Could someone please post a link, or the file itself, of the driver you use for your HTC?
You should not need any special drivers just for activesync or usb-serial connections to the device.
Drivers are only needed if you want to use it as a modem.
then has anyone else had this problem? do you have any suggestions pof? this is driving me nuts...
Shaderach said:
then has anyone else had this problem?
Click to expand...
Click to collapse
Never heared before.
Shaderach said:
do you have any suggestions pof? this is driving me nuts...
Click to expand...
Click to collapse
Disable activesync if it is connected, put the device in bootloader mode and try to connect to it using mtty. If you get the "USB>" prompt you can do everything, you don't need activesync at all for unlocking or flashing roms, everything can be started with the device in bootloader mode.
if it sheds any light on the problem, when i plug it in instead of the usual "do-doo" rising intonation sound you get with a successful USB interface, i get a "duhduhduh" meaning it's connected, but not recognized...
ok i'll try that, sorry i wasn't aware that getting activesync to work wasn't a prerequisite for the other steps
i've never felt so stupid
i've downloaded mtty, and read and reread the wiki
my hermes is in bootloader mode, and mtty connects on port 3 but i don't get a USB> prompt, i just get a window named "COM3 115200 N-8-1" and a nice empty white space
i have no idea what to do now
i was planning on following this seemingly effortless writeup/summary by okinz:
http://forum.xda-developers.com/showthread.php?t=280566&page=9
but now i've got nothing.
i'm really sorry to bother you, but please don't give up on me!
i cannot make a connection using USB with mtty btw... forgot to include that
1) dumb question: did you select "USB" on mtty drop down list?
2) Do you have another computer where you can try?
3) Which windows version are you using?
pof said:
1) dumb question: did you select "USB" on mtty drop down list?
2) Do you have another computer where you can try?
3) Which windows version are you using?
Click to expand...
Click to collapse
1) yes, no connection
2) i just tried just plugging in the Tytn on my roommate's laptop, he got a different usb message, windows recognized it as a "Generic NDIS device" but failed to install it for lack of driver, is this what is supposed to happen? mine doesn't do this at all
3) windows XP SP2
update - just rebooted for about the 10th time and this time it recognized it as an NDIS and activesync has found it
i guess it was just a windows thing... *shrugs* i'll post again once i've tried the next steps
thank you pof, thank you very very much for sticking with me
Shaderach said:
thank you pof, thank you very very much for sticking with me
Click to expand...
Click to collapse
no problem
glad you solved the issue
i just want to let you know that i've got everything working and fully converted now
please close this thread, and know that everyone here has my heartfelt thanks
So I recently downloaded the "RUU_Hermes_CINGULAR_WWE_2_1_[1].15.502.3_6275_1.40.30.00_108_Ship" ROM for my 8525, in hopes that it will provide me with a more stable pda/phone enviroment so that I may do the work I need to without having to hard reset every other day or so.
When I try to run the ROM install, I follow all the insturctions but when the update starts to run, it shuts my activesync connection off so the update can't run and throws back an error that it lost connection with the device.
Any Help Here? Thanks
PS: I love the idea of being able to use my 8525 for all my work and play needs, but if this update doesn't help make the device more stable, I will have to sell it for something that doesn't crash this much.
hey..iv got same problem.. i think it maybe cause we are using windows vista (thats the only information i can find about it).. i wanted to update ma rom aswell
I'm using XP Pro.
try running it on another system...if available...
anyone know the solution to this?!
OK, have you installed HardSPL ??
Check my SAFE WM5 upgrade guide, if you follow the procedures in there you should be fine.
Yeah, as far as stability goes most the wm5 roms out of the box aren't going to be the best. with any rom i use sktools to tune it up for performance/stability settings. It does this automatically so you don't have to find various registry keys. So don't think just because you are going to another rom everything will be okay.
Read the wiki, search the threads, you will find answers to all your problems.
As far as you not being able to connect what is your spl number? Also, have you tried hard reseting then connecting or trying another computer. I had the same problem when downgrading a black 2.5 with hard spl 2.1 ( i had to downgrade to send it back to cingular). I ended up just downgrading to the highest version of cingular rom which is branded AT&T. It looked like a pretty good rom but I did not play with it.
he does not need hardSPL(at least i dont think so) he is just runnning an update for another cingular ROM, its still the same CID...try running it on another system, i had this same problem and it worked on another system....
Malik05 said:
he does not need hardSPL(at least i dont think so) he is just runnning an update for another cingular ROM, its still the same CID...try running it on another system, i had this same problem and it worked on another system....
Click to expand...
Click to collapse
HardSPL will protect him against a faulty SPL flash if it occurs, a newer SPL is likely to be in the ROM update aswell as a newer radio possibly. Having the same CID doesnt matter because if the radio or SPL flashing procedure messes up it can create a bricked device VERY easily (corrupt SPL or even a corrupted CID/Radio BL). Besides if he already has HardSPL that would explain why the RUU doesnt reconnect when the device is in bootloader mode.
mrvanx said:
HardSPL will protect him against a faulty SPL flash if it occurs, a newer SPL is likely to be in the ROM update aswell as a newer radio possibly. Having the same CID doesnt matter because if the radio or SPL flashing procedure messes up it can create a bricked device VERY easily (corrupt SPL or even a corrupted CID/Radio BL). Besides if he already has HardSPL that would explain why the RUU doesnt reconnect when the device is in bootloader mode.
Click to expand...
Click to collapse
point well taken...=)
you mention, since he has already gotten HardSPL, why would that mean his device doesnt reconnect in bootloader?
put it in bootloader first and then run the update...
make sure you disable usb connections with active sync put your phone in bootloader and run the update might as well go with WM6 its a lot more stable than any WM5 rom i have played with .
OS crash
I run ROM install then computer shuts itself now my 8525 show hi true color with red/blue/white i tried to hard reset to solve but till hi true color what should i do?
trgrapsonu said:
I run ROM install then computer shuts itself now my 8525 show hi true color with red/blue/white i tried to hard reset to solve but till hi true color what should i do?
Click to expand...
Click to collapse
I've run there updates on my 8525. If the computer is shutting itself down, try another computer. This sounds odd. More of a computer problem then a Tytn Problem.
Malik05 said:
try running it on another system...if available...
Click to expand...
Click to collapse
=) have you even tried it?
I'm having a problem connecting ActiveSync over USB. When I first got the phone I was able to use that connection. Then I set up BT ActiveSync. I believe at the time I could use either USB or BT, but it has been a while. BT sync was so much more convenient for me that I haven't used my USB connection except for charging the phone.
Today I tried to get set up to upgrade the ROM, but ActiveSync doesn't seem to work over USB anymore. I turned off BT on the phone. When I plug it into my laptop's USB port the laptop makes a sound indicating it sees the connection. It makes a different sound when I unplug it. I also see the orange charge light come on on the phone. I usually charge the phone this way when I am on the road since I don't carry the wall charger with me.
I think at one point I installed a river that I fdound here to access the phone in bootloader moder. Other than veryfying the phone connected this way, I never did anything with the driver. IT has been so long that I don't remember the details. Could that be affecting the connection for ActiveSync?
I have made sure my firewall is inactive. In Windows XP Device Manager I see an HTC USB Sync device under Windows CE devices. Would it be safe to remove that device?
Any ideas how I can get USB ActiveSync to work again?
Is it totally crazy to try the ROM upgrade over the BT connection?
emuyshondt said:
I'm having a problem connecting ActiveSync over USB. When I first got the phone I was able to use that connection. Then I set up BT ActiveSync. I believe at the time I could use either USB or BT, but it has been a while. BT sync was so much more convenient for me that I haven't used my USB connection except for charging the phone.
Today I tried to get set up to upgrade the ROM, but ActiveSync doesn't seem to work over USB anymore. I turned off BT on the phone. When I plug it into my laptop's USB port the laptop makes a sound indicating it sees the connection. It makes a different sound when I unplug it. I also see the orange charge light come on on the phone. I usually charge the phone this way when I am on the road since I don't carry the wall charger with me.
I think at one point I installed a river that I fdound here to access the phone in bootloader moder. Other than veryfying the phone connected this way, I never did anything with the driver. IT has been so long that I don't remember the details. Could that be affecting the connection for ActiveSync?
I have made sure my firewall is inactive. In Windows XP Device Manager I see an HTC USB Sync device under Windows CE devices. Would it be safe to remove that device?
Any ideas how I can get USB ActiveSync to work again?
Is it totally crazy to try the ROM upgrade over the BT connection?
Click to expand...
Click to collapse
have you tried changing the setting on your phone "USB to PC"? I would try this first before digging to deep
slavetolustnyc said:
So I recently downloaded the "RUU_Hermes_CINGULAR_WWE_2_1_[1].15.502.3_6275_1.40.30.00_108_Ship" ROM for my 8525, in hopes that it will provide me with a more stable . . . When I try to run the ROM install, I follow all the insturctions but when the update starts to run, it shuts my activesync connection off so . . .
Click to expand...
Click to collapse
You may want to try using the Hard SPL v7 and then install your ROM. I did that and all went smooth as silk - six times now. I have been browsing ROMs to see which one suited my needs an personality, and it has been fun. You can find that on my FTP site at ftp://xda:[email protected]/xda_dlz/
This is a dynamic IP Address from a cable modem so two things are true
1. It is subject to change at any time.
2. It is not as fast as some of these speedy servers
But, I do know where it is.
shogunmark said:
have you tried changing the setting on your phone "USB to PC"? I would try this first before digging to deep
Click to expand...
Click to collapse
I had tried this yesterday and checked the Enable advanced network functionality box. Today I unchecked it and suddenly the PC saw a new USB device (HTC Sync USB, I think). It still wouldn't sync automatically so I manually executed /windows/repllog.exe. This time it connected.
Some observations:
- After the connection was established the the name of my 8525 was changed to something different (something like WM_ComputerName1, Where ComputerName is my computer's host name). I changed the name back and was able to re-invoke repllog.exe and sync with the old name.
- If I disconnect the USB cable from the phone and plug it in again ActiveSync doesn't connect until I manually run repllog.exe. It does work when I run the exe on the phone manually.
I went ahead and started the upgrade process after connecting by running repllog.
Executing the RUU file from the HTC site first put SPL 1.11 on the phone and left the phone in bootloader mode (with the tricolor screen). I left the phone with bootloader screen and followed the instructions (although by now ActiveSync had shut down so the part about the AS connection that the installer asked for was not true). The progress bars appeared on both the phone and the PC. It took a few minutes to complete, but the update was successful.
After the upgrade I was able to sync over USB without any problems. I am now syncing my contact from Lotus Notes and setting things up to my liking. Once I got over the USB connection problem everything worked fine!
ive just got hold of a M3100, and im trying to unlock it and wm6 it and all that, i get so far then it tell me driver wceusbsh.sys is missing? any idea where what how etc?
ive had a wizard up until now and ive never had any issues with this?
ive done a search but doesnt throw up any answers i understand?
oh ive got as 4.5 and running XP
cheers
fil said:
ive just got hold of a M3100, and im trying to unlock it and wm6 it and all that, i get so far then it tell me driver wceusbsh.sys is missing? any idea where what how etc?
ive had a wizard up until now and ive never had any issues with this?
ive done a search but doesnt throw up any answers i understand?
oh ive got as 4.5 and running XP
cheers
Click to expand...
Click to collapse
It really isn't necessary to CID unlock your hermes device any longer, the wrappers for most roms here us SSPL which effectively bypasses the CID check.
Though I suggest you install Hard SPL before you start actual flashing, this will make your device recoverable in most cases if you have a bad flash or something goes wrong.
Is the driver missing on your device or on your PC? If it's the PC I would just re-install AS 4.5 on the PC. Then for good measure reboot both your phone and the PC before you connect again.
Zzan said:
Is the driver missing on your device or on your PC? If it's the PC I would just re-install AS 4.5 on the PC. Then for good measure reboot both your phone and the PC before you connect again.
Click to expand...
Click to collapse
wceusbsh.sys is the Serial over USB driver used by ActiveSync - it lives in \Program Files\Microsoft Activesync\Drivers; sounds like it didn't get installed properly when you installed Activesync 4.5 on your PC.
I agree with @Zzan - you need to re-install....but I think a bit more than that is needed, so here goes...
1. Uninstall Activesync 4.5 from Control Panel | Add/Remove Programs
2. Reboot your PC
3. Check to make sure \Program Files\Microsoft Activesync no longer exists - delete it if it's still there.
4. Make sure your phone is NOT connected to your PC and re-install Activesync 4.5
5. Reboot your PC (sorry if this is a bit tedious )
6. Connect your phone directly to a USB port on your PC, NOT VIA A USB HUB!!!
7. Activesync should now detect your phone and start the "Create new partnetship" wizard.
If this procedure fails to solve the problem, then you'll probably need to get involved with removing the "USB Hub" in Device Manager and have XP redetect it after a reboot....not nice, so fingers crossed the above works
HTH,
Mark.
deleted and re installed AS 4.5 and its all working ok, cheers people
Hi.
I am a bit embarrassed about writing this, I never thought I would make a brick of my Prophet during “upgrades”...
But here I am, with a phone that don't want to sync with any computer after I accidentally pressed cancel on an active sync dialog box asking for setup with a new device, during upgrade to the latest Touch VIII. Have upgraded several times with several different ROM’s before, but this time things went wrong.
If I choose to start my device normally, it goes trough the HTC screen and stops after the Qtek (HTC in Norway) screen listing the different versions of the hardware…
When I restart to boot loader (Cam button + reset) the 3 colours turn up ok, but when I put an USB cable in the device and the lower, left part of the screen shows USB, active sync will not recognise any new device no matter what I do.
I can still find the Prophet when I go to properties on the computer, but somehow active sync does not care about that.
Are there any way to use a program at the host computer to sync properly with the Prophet?
I would really appreciate any help that could rectify this problem.
Regards, Lars Norway
I believe the " WM6 Upgrade Guide" thread has the info you needed.
panda88 said:
I believe the " WM6 Upgrade Guide" thread has the info you needed.
Click to expand...
Click to collapse
Tried the info there without success...
The guide assumes that you have connection with ActiveSync, but I can not seem to get connection.
So, I really need some advice about how to make a connection to the computer I will make the programming from, when ActiveSync is not working properly.
Have tried to restart both the device and the host computer, have reinstalled ActiveSync, have tried to start the different roms without having a connection to A.S., but no luck...
Have realized my mistake and bought a new Prophet, but would still like to get the old one working again.
it has nothing to do with activesync.
Not sure u really understand the below statement from the thread I mentioned.
RECOVERING FROM ERROR IN STEP 8 WM5->WM6
1. Don't panic
2. Don't panic
3. Unplug the phone
4. Reset with stylus,and keep the Camera Button pressed.
5. A 3 color screen will appear(Bootloader Screen)
6. Connect your device with your PC,and run the NVID(no vendor) WM5 rom.
7. The device will be resetted after RUU(rom update utility)finishes
8. Repeat the WM6 upgrade,from STEP 5..
in case you can't NVID roms, you can still use those step1 roms mentioned by ROM gurus here.
panda88 said:
6. Connect your device with your PC,and run the NVID(no vendor) WM5 rom.
Click to expand...
Click to collapse
Well, the problem is that I am not able to connect...
As far as I understand, the only way to connect is by using ActiveSync?
Regards
connect = the cable between prophet and your pc. after that just run the rom update utility. just dun bother the activesync (does it sound logical to u to establish activesync in bootloader mode?)
OK, I have tried it, but will try on some different computers also.
Posting in a couple of hours.
Thanks for your help so far!
then wish u good luck. happy un-bricking.
OK, same as before.
Depending on which ROM I try, the following messages are the result:
Error [300]: Invalid update tool.
Error [274]: Connection (The update utillity cannot connect to your PDA phone.)
If I try the Touch VIII direct, it stops in Initializing for a while, and then a message appears with the text: Cannot connect to device, Would I like to try again?
Besides, in the welcome screen during the "ROMUpdateUtility_NV_G4.exe" in the Prophet_PV_Temp program, step nr. 2. asks me to ""Establish an ActiceSync connection with your PDA phone."
So, no change from yesterday yet...
are you using windows vistA???
Have only been using computer with XP Pro installed.
Anybody of the opinion that the connection tools built into Vista might do a better job?
hifiasylum said:
Have only been using computer with XP Pro installed.
Anybody of the opinion that the connection tools built into Vista might do a better job?
Click to expand...
Click to collapse
No, on the contrary. The best change you have is XP. Zeroed asked about Vista because it could be the reason of your troubles.
What I should do is just one detail different of what you have already tried:
Put the prophet in bootloader.
DISable "allow USB conection" in the conection-setting panel of ActiveSync
Connect your prophet with the USB cable
Run the NVID RUU again
If that is succesfull, you can upgrade to the WM6 ROM you like.
OK, will do.
Tried Vista just now, same errors and no luck.
Be posting in a minute...
OK, now I'm back.
Made a restart of the host computer, changed settings in ActiveSync, startet my device in Bootloader...
But unfortunately, no more success this time either.
Feel that the device must be more seriously defective/broken than others, this mishap happend at the end of the programming, when the 3 partitions were being written in the device. I was loading Touch VIII...
Anybody know if there is any more combination of buttons or reset methodes I could try?
Next step is to start opening the Prophet...
hifiasylum said:
OK, now I'm back.
Made a restart of the host computer, changed settings in ActiveSync, startet my device in Bootloader...
But unfortunately, no more success this time either.
Feel that the device must be more seriously defective/broken than others, this mishap happend at the end of the programming, when the 3 partitions were being written in the device. I was loading Touch VIII...
Anybody know if there is any more combination of buttons or reset methodes I could try?
Next step is to start opening the Prophet...
Click to expand...
Click to collapse
Sorry, I'm out of options...
OK.
Thanks again for all help and support.
Really appreciated!
Regards, Lars
hifiasylum said:
OK.
Thanks again for all help and support.
Really appreciated!
Regards, Lars
Click to expand...
Click to collapse
Just wondering if your computer detects prophet as a device at all? Does the normal plug device sound comes on when you plug in? Just a long shot, stick in a SD card and try with windows media player to see if it can sync or put files onto SD card. if so, get rom refreshed via SD card...
try few hard resets before you try this.
Not quite sure I understood what you suggested. I can get the device up in the host computers machine properties, but there is no way to get it up in any other program - like the Windows explorer.
Or are you saying that there is a way to boot the Prophet directly from a SD card? That would impress me!!!
hifiasylum said:
Not quite sure I understood what you suggested. I can get the device up in the host computers machine properties, but there is no way to get it up in any other program - like the Windows explorer.
Or are you saying that there is a way to boot the Prophet directly from a SD card? That would impress me!!!
Click to expand...
Click to collapse
This sounds dumb, but try restarting your PC, closing all apps running in background (including firewalls), restarting Prophet (with stylus in reset hole). DO NOT TRY TO USE ACTIVE SYNC. Boot into bootloader (Three colours screen), connect USB cable and flash QTEK lastest official, or Jesterz AKU 3.3 (I have found this ROM to have magical powers of unbricking.)
Good luck!
hifiasylum said:
OK.
Thanks again for all help and support.
Really appreciated!
Regards, Lars
Click to expand...
Click to collapse
Hmm this is wierd.I ran into problem earlier this month trying to flash a ROM but got stuck somewhere. So I followed the steps given in the sticky thread. Everything work smoothly. I am using XP SP2 and mine is a G3.
Let's make the assumption that your PDA is not faulty. Maybe you can try the steps again but this time :-
1. Change to another USB cable (or you may test the existing cable by connecting to a working pda)
2. Change to another USB port
3. Make sure you are not running any program that hogs the USB resource
4. If you are using USB hub, please don't connect using it. Make a direct connection to your computer.
that's all I can offer now...hope it helps.
Sounds like USB port is broken.
Hi all,
I've read a couple of threads for several days now, but none of the answers worked for me.
Problem is: I can connect from my HD2 to my desktop PC (win 7) initially, but when I try to install a new ROM (3.14.407_2), my HD2 restarts, shows the four colour screen and nothing more happens. After some minutes, my PC tells me that my phone isn't connected anymore.
It worked two months ago for the last ROM flash, but now nothing helps.
Tried:
- rebooting PPC and PC several times
- deleting partnership and setting up a new one
- disabling "faster connect" for usb to PC settings - afterwards, PC doesn't recognize any connection at all
- hard reset on PPC
I have no idea what to try next.. I wanted to install HSPL2 and flash the ROM from my SD card, but can't install HSPL2 ... same problem.
Any suggestions?
Thanks
Infyrana
I also tried several USB ports on my PC
You think the HD2 USB port is broken? But I was able to transfer data when connected as normal device without active sync.
Do I have any chance to check, whether you are right, without having to send my phone to HTC?
maybe running the update in compatibility mode will help?
I thought the microsoft mobile device center (or however it is called) was made for win7, as the actual activeSync tool cannot be used?
So I can't see a benefit from this, but anyway.. I will try.
You could try using BlueTooth with ActiveSync, thats what I do. I have a "micro" bluetooth adaptor for my laptop and it all works fine... just a bit slower.
A
Infyrana said:
I thought the microsoft mobile device center (or however it is called) was made for win7, as the actual activeSync tool cannot be used?
So I can't see a benefit from this, but anyway.. I will try.
Click to expand...
Click to collapse
the compatibility mode for the ROM update file could help becasuse it is a separate application (no guarantee though as I have no way to check it on my PC)
compatibility mode didn't help.
don't have a bluetooth stick ...
no further suggestions?
Just found out, that windows tries to install driver "Qualcomm CDMA Technologies MSM" when I connect my HD2 after starting bootloader.
But it just searches and doesn't find anything. I searched by myself, but didn't find the driver anywhere ...
if you are really determined to update ROM, find the thread on ROM 3.14 here on xda forum, I recall seeing guidelines on installing ROM from SD Card
of course it will not solve your sync problem, but still...
Yah ... I wanted to install HSPL2 to be able to do install the ROM from the SD card (at least that's what I understood - that I need that first), but I can't install it, as I already wrote.
I GOT IT!!!
Finally.. in a forum somewhere in a forgotten corner of the internet.. someone gave an advice to uninstall the windows mobile device center and reinstall it.
After uninstalling, I had some trouble to find it again, but finally got it.
And guess what: it works now.
Windows managed to install the quadcomm driver and I could update my ROM.
Never had such a hard challenge with my HD2.
Thanks everyone who tried to help!