Hi Guys
First sorry for my english I hope you can understand what I meen
I updated my VPA1 = QTEK 2020 with Ger.shiped rom from Vodafone. it's original rom.
Now I have a problemm with SDCARD. I can read sd with Qtek but I can't whrite on it.
I thing new rom killed sd-slot driver???? or something like this.
Please make me Happy tell me what I can do!
Thanksalot
Cheers
Aykut from Germany
VPA I ~ QTEK 2020 von Vodafone
Modell-Nr. H10B
ROM ver. : 1.72.01GER
ROM Date : 03.16.2004
RUU ver. : 1.14.00
Prot. ver. :1337.24
ExtRom : 1.72.201
i would make sure the write proction switch on the sd card was not set
and if it were not locked
i would try the card in a sdcard reader or another device which used sd cards to check if they can write on it
if they could not i would "write" it off as a bad sdcard
and try another sdcard
I did it all SD is OK.
I tested with my MDA III and with PC I can write, read and erase no problem
The problem is Qtek 2020
cheers aykut
try a different sd card in the 2020 (pref an older card like a 512 meg or smaller...likely to be slower read/write) ... see what happens
if it works then it might be driver/OS related...what size, make and model is the card... there are known problems with larger faster cards
if it doesn't work then the phone has an issue (maybe flash a new rom, or check that the hardware switch that checks for write protect is'nt stuck)
hope that helps
Tim
Related
I dont have MDA yet , but today some guy want to sell me this sp.
I need information how to check avail RAM/ROM memory , its default MDA expanded by memory card (RAM?) or its build-in so memory card slot is empty?
Regards
Adam
in my system settings under memory i can see how much mem i have
left i can also set the slide between storage mem and program mem
my xda / qtek /mda ...... htc wallaby
dont have anything in it's SD port
and i'm getting myself a 256MB card for it for xmas
about rom then you cant put stuff in the rom other then at flash time (the time you flash your rom with the window CE pocketpc200X os)
other then that the ROM is read only memory
all htc wallaby have a 32MB rom
think that goes even for the new xda2 line
re
But when i check avail mem it tells me ROM: bla bla / RAM: bla bla ?
its important i dont want to be cheated. From my info MDA/XDA got 32mbrom (buildin) and 32ram (buildin)
HELP!
and 32ram (buildin)
Click to expand...
Click to collapse
thats the older version the newer versions of the xda's (dont mean xda2 here)
have 64MB buildin
older?
Older version is more suxxy than 64mb version ? or its just memory incrase?
as far as i know the only difference is mem
Hi to everyone.
Two weeks ago a bougth a Qtek 2020 and I read about backup the rom in a sd card. So I used Multi-Port/USB TTY with all the steps post in the forum. I´m in bootloader v. 1.03 and
enter d2s
SD:Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from response.
SDetected one card
SD:ready for transfer OK
pc->drive.total_lba=3C100
pc->drive.num_heads=0
pc->drive.sec_p_track=0
pc->drive.num_cylinders=0
pc->drive.block_size=200
pc->drive.features=0
pc->drive.RCA=A95C
pc->drive.drv_type=40000000
pc->drive.securedAreaSize=0
pc->drive.securityDrv=0
pc->drive.busWidth=1
pc->drive.erasedSize=0
Total card size=7820000
SDCARDD2S+,cStoragePlatformType=FF
******************************************
SD/MMS succesfully
When I follow to back my extended rom and radio nothing happened
USB >d2s 60000000 00300000 sd a ENTER and nothing
USB >d2s 70000000 01080000 sd a ENTER and nothing
Please if someone can tell me what i´m doing wrong I ll very appretiate.
And other question: What´s rom should i use with my Qtek 2020?
Thanks.
Qtek 2020
OS ROM 1.60.00WWE
Extend Rom: 1.60.21
Radio Shack: 1.10.00
Why not go the easy way and use a backup manager like sunnysoft backupmanager or sprite backup.
That way you can just use the gui and save your (even self-executable) file on sd-card for emergency purposes . . .
These program can backup the extented rom and the radio shack?
And where i can find them
Thanks
The rom's should not need regular backup. because they're ROM.
Keep a ROM upgrade file as a backup.
Backupmanager is able to backup your complete PocketPC.
I you have that on your sd card as an .exe, just running that after any hard-reset will get you up & running in minutes.
Search for sunnysoft, i think its a cz website
bolotee said:
Hi to everyone.
Two weeks ago a bougth a Qtek 2020 and I read about backup the rom in a sd card. So I used Multi-Port/USB TTY with all the steps post in the forum. I´m in bootloader v. 1.03 and
enter d2s
SD:Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from response.
SDetected one card
SD:ready for transfer OK
pc->drive.total_lba=3C100
pc->drive.num_heads=0
pc->drive.sec_p_track=0
pc->drive.num_cylinders=0
pc->drive.block_size=200
pc->drive.features=0
pc->drive.RCA=A95C
pc->drive.drv_type=40000000
pc->drive.securedAreaSize=0
pc->drive.securityDrv=0
pc->drive.busWidth=1
pc->drive.erasedSize=0
Total card size=7820000
SDCARDD2S+,cStoragePlatformType=FF
******************************************
SD/MMS succesfully
When I follow to back my extended rom and radio nothing happened
USB >d2s 60000000 00300000 sd a ENTER and nothing
USB >d2s 70000000 01080000 sd a ENTER and nothing
Please if someone can tell me what i´m doing wrong I ll very appretiate.
And other question: What´s rom should i use with my Qtek 2020?
Thanks.
Qtek 2020
OS ROM 1.60.00WWE
Extend Rom: 1.60.21
Radio Shack: 1.10.00
Click to expand...
Click to collapse
try manually typing d2s 60 blah blah instead of copying and pasting??
Rom version 4.01.12.ENG
Rom date 12/22/03
Radio version 4.01
Protocol version 32e2
Since I installed this version on my PDA the software on the SD memmory card sometimes delete's itself??
How does this happens and wich version is more stable?
please advice
ppc 2002 will not have this issue......
stefan
hi, used same rom and same problem occured from time to time but its not so huge problem - you can always backup the card on a pc over the active sync or card reader (which is better solution) and if the problem occure just put those files back
Hi i recently updated the roms through O2 site everything is fine just i cant seem to install programs ie tomtom or any other cab files???!! can anyone help me. All it does is shows the installation screen with the spinning redblueyellowgreen box and thats it. Im confused why its not doing anything.
Kidd
Rom Ver 2.21.4.1 WWE
Rom Date 3/9/06
Radio Version 02.07.10
Protocol Ver 413.1.03
ExtRom Ver 2.21.4.101
The ROM is screwed up..
try reflashing..
its the memory card. Just brought it from ebay 4gb unbranded. I used a old 512mb card and its fine with that. Its when you activate programs on the card it stops and starts. I already formated the card with windows fat32 that didnt work and the panasonic formatting program. It did work for abit but not anymore. Please help
kidd78 said:
its the memory card. Just brought it from ebay 4gb unbranded. I used a old 512mb card and its fine with that. Its when you activate programs on the card it stops and starts. I already formated the card with windows fat32 that didnt work and the panasonic formatting program. It did work for abit but not anymore. Please help
Click to expand...
Click to collapse
Not sure, but you can try research on the highest capacity a Wizard can take. And, take note of possible scam on high cap unbranded memory cards. E.g. try copying full 4GB contents into the card, just to make sure it is now a scam card.
ok copied up to 3.88 gb of mp3s so its pretty much a 4gb. I stuck the mini sd into a old pda Acer N30 (adapted) and it seems to work fine. Seems like the card is the problem as i have no problems using my old 512mb mini sd. Apparently its a samsung card. Im really stumped.
I try installing andriod some days back and the hd2 freeze in black screen for a long while.
After re-setting the HD2, programs i installed in the memory is unable to detect.
I try re-installing the program n the installation fail.
I try to re-format the SD card using the re-format function from the phone n i still face the same problem..
Please advise on how to tackle this issue.
Thanks.
HD2 spec:
OS version : 5.2.21869 (21869.5.0.82)
Manila Version : 2.5.19211619.0
ROM Version : 1.66.707.1 (76641) WWE
ROM Date : 01/12/10
Radio : 2.07.51.22_2
Protoco Version: 15.2.50.07U
bengzter said:
I try installing andriod some days back and the hd2 freeze in black screen for a long while.
After re-setting the HD2, programs i installed in the memory is unable to detect.
I try re-installing the program n the installation fail.
I try to re-format the SD card using the re-format function from the phone n i still face the same problem..
Please advise on how to tackle this issue.
Thanks.
HD2 spec:
OS version : 5.2.21869 (21869.5.0.82)
Manila Version : 2.5.19211619.0
ROM Version : 1.66.707.1 (76641) WWE
ROM Date : 01/12/10
Radio : 2.07.51.22_2
Protoco Version: 15.2.50.07U
Click to expand...
Click to collapse
the only thing I think will erase any and all leftover corrupt data that is messing up your phone is task 29. these are things you need to do.
*if you haven't ever flashed a custom rom, and want to, do a hard spl(find the one specific to your phone) if your not going to flash a custom rom hard spl is not necessary, just find the neccesary stock rom package.
*Do a task 29 .http://forum.xda-developers.com/showthread.php?t=644781
*flash any rom.
*reformat your sd card to fat 32.( make sure to save any files you want before formatting as it will delete all info on card.
I hope you taking these steps help you bring your phone back.
DISCLAIMER!! I AM NOT RESPONSABLE FOR YOU MESSING UP YOUR PHONE, SO MAKE SURE YOU READ UP ON THESE STEPS I TOLD YOU SO YOU DON'T MAKE THINGS WORSE, GOOD LUCK
is it only programmes installed on your sd card that it cannot detect?
if so? It may be that your phone has created a new sd card? (in other words your old sd card may now show as sd card 1) If so then delete this new one and the old one will reappear.
Just a thought and if it does not work sorry.
sike222 said:
is it only programmes installed on your sd card that it cannot detect?
if so? It may be that your phone has created a new sd card? (in other words your old sd card may now show as sd card 1) If so then delete this new one and the old one will reappear.
Just a thought and if it does not work sorry.
Click to expand...
Click to collapse
there is no extra sd card sighted in HD2. All Cab file cannot be installed or removed.