Dear
Friends
I need to help’s your.
a little while ago I upgradede my xda Atom rom.( from Xda-Atom-ENG-20060426 to Xda-Atom-Exec-ENG-20060721)
But not worked (in navigation pad )centre key.
I decided to downgrade my xda atom rom. I maked source this subject and find this page : Mr. tjs0509 wrote (member) http://forum.xda-developers.com/showthread.php?t=276664
tjs0509 said:
1. Download the 20060426 from www.seeo2.com
2. Run DSUU, after extracting the files in directory windows\temp DO NOT CLICK NEXT
3. Copy all 6 files into temporary or another directory
4. From that 6 files, copy 2 files with the extention nb0 (diskimage_ver.nb0 and eboot.nb0) to your mini SD
5. After copying into your mini SD, rename diskimage_ver.nb0 into diskimg.nb0
6. Now, you can run bootloader by pressing camera and soft reset ( you have to put your mini SD into your Atom so that the bootloader will boot from mini SD
7. Just wait and if there is some error message do not bother them, the most important that downloading OS Image and Eboot
8. After that your screen will blank, do not worry or panic
9. Pull out your mini SD and connect USB to PC and run bootloader again
( please make sure that your usb already connected to pc )
10. Now u can normally run the 20060426
Click to expand...
Click to collapse
I applied his descriptions. But my xda atom not worked ... not open... not work any keys... black screen ....
If have you knowledge about This subject , how can I repair it .?
Please ! please informe me....
Best wishes
Is anybody can help you.I have same problem.New atom exec software running properly on my device, but phone function is not running.
tatarogul said:
Dear
Friends
I need to help’s your.
a little while ago I upgradede my xda Atom rom.( from Xda-Atom-ENG-20060426 to Xda-Atom-Exec-ENG-20060721)
But not worked (in navigation pad )centre key.
I decided to downgrade my xda atom rom. I maked source this subject and find this page : Mr. tjs0509 wrote (member) http://forum.xda-developers.com/showthread.php?t=276664
I applied his descriptions. But my xda atom not worked ... not open... not work any keys... black screen ....
If have you knowledge about This subject , how can I repair it .?
Please ! please informe me....
Best wishes
Click to expand...
Click to collapse
you cannot fix yourself, you must send to O2, the method you used killed the bootloader.
Related
see the picture attached!
i just follow the method from the site
http://bbs.pdafans.com/viewthread.php?tid=42614
just finished by last night,and i set it to one key rotate screen using the software phm key,so cool~
Any chance of translating this to English? :wink:
@ricky0930
i just follow the method from the site
http://bbs.pdafans.com/viewthread.php?tid=42614
just finished by last night,and i set it to one key rotate screen using the software phm key,so cool
Click to expand...
Click to collapse
Hi ricky0930,
That thread is no more accessible... ( looks like it was deleted.
However, I downloaded .bin ROM image from another site.
Did you get (at upgrading) an error message "Update NOT allow" ??
What was your bootloader version before upgrade?
THANX
buzz
where can i download it from?
http://www.kenofalte.com/69602Ver.BIN
Click to expand...
Click to collapse
120.13 MB
http://www.kenofalte.com/69602Ver.BIN 120.13 MB
Step for upgrade
Hi ricky0930,
Could you please post all steps for upgrade?
Cheers
must do some cut n paste work before update
and the result is a totally chinese ppc even the model no change to ph10b,
since i'm at china and using chinese,i can handle all this,but if u guy want to do this, i'll post the process step by step later.
I want English Version. Somebody please!!!!!!!!!!!
Steps for upgrade:
1. make SD ROM backup of your XDAII
2. using Winhex, save the content to PC
3. using Winhex, copy the first 412 bytes from the header of your backup file
4. using Winhex, paste them over first 412 bytes of the chinese ROM backup binary file and save it
5. using Winhex, write chinese ROM backup file onto your SD card
6. put the SD card in XDAII and enter bootloader mode (wait a bit)...
7. press "Power" to flash...
That's it. At the end of flashing, it will complain, that "checksum failed", but just reset and....
...I have WM2003 SE running on my XDAII!
I'm not saying too much details on how to do this and that, because if you are NOT an EXPERIENCED USER of winhex, XDAII bootloader, YOU HAVE NO KNOWLEDGE, HOW TO FLASH XDAII, THEN:
!!!!!!! D.O.N.T. D.O. T.H.I.S. !!!!!!!
If you do, it's your own risk...
buzz
I want English Version. Somebody please!!!!!!!!!!!
NON-SD image
Does anyone have access to the non-SD image of this ROM? I mean the official desktop .exe that flashes the device?
I have upgraded to 2003SE, very happy to use it, ha ha ... ...
byron,
can you explain more clearly how you can upgrade the rom? Is this a simplified or traditional Chinese rom?
Await for your reply
Chi Fai
simplified Rom
but not as the normal .exe upgrade from O2, you need
a special way to do it
Anonymous said:
byron,
can you explain more clearly how you can upgrade the rom? Is this a simplified or traditional Chinese rom?
Await for your reply
Chi Fai
Click to expand...
Click to collapse
hi, Chi Fai, here it is:
1. Backup ur ROM. Insert above 128MB SD, uncheck "USB connection" in ActiveSync. Using "romupdate.exe", select "\\.\WCEUSBSH001". type "d2s".
2. Using "ntrw" "read" ur ROM into PC.
3. Using winhex, replace the 0-383 byte of "69602Ver.BIN" w/ ur ROM's. May be 0-411 byte, if ur xda2 is V1.06. Mine is V1.01.
4. Using "ntrw.exe" to write ROM(2003SE) to SD.
5. Insert the SD to ur xda2, enter bootloader mode, press "Power" to flash... then reset.
5. "69602Ver.BIN" is a simplified Chinese ROM.
6. BTW, U can still get recovery by uring ur ROM SD in bootloader mode.
7. Mention above posted: "if you are NOT an EXPERIENCED USER of winhex, XDA II bootloader, YOU HAVE NO KNOWLEDGE, HOW TO FLASH XDA II, THEN: !!!!!!! D.O.N.T. D.O. T.H.I.S. !!!!!!! If you do, it's your own risk... "
Good luck! BTW, I flash mine w/ abt 20 min... will upgrade the radio to 1.18... ...
how about the radio ? and ext rom ?
Using winhex, replace the 0-383 byte of "69602Ver.BIN" w/ ur ROM's. May be 0-411 byte
I saw in few forums there is 3 number to replace
0-383
0-3xx
0-411
how do we know which one is which one
there is 2 more number also
0-368
0-399
You have to replace the complete ROM image header (highlited in blue) up to HTCS checksum.
It depends on your bootloader version and device...
buzz
hi all,
I am looking to upgrade my himalaya to wm2005.I was scared to death when i was upgrading my device to 2003se, but with the help of xdajojo& others, I was able to upgrade very easily with diamond1.2 from omegared.Now I have been reading on how to upgrade to 2005 by xdajojo but to be frank, despite the beautiful way everything has been arranged, I cant understand most of it...I did try to upgrade but then I got the country id error(I have no idea what that means), I reffered to certain posts but that was all alien language to me :? .I really wish I could upgrade to wm2005, with all the talks around about how good the feel is i just cant wait, but the procedure seems difficult.I am also concerned about the RAM problem, as I dont understand most of the discussions about that(am I the only fool here? ).Anyway, is there a simpler way to do all this like we did with diamond or I would just be deprived of the cool wm2005?
Please guys I need help on this.Thanks eveyone.
Download these files:
Activesync (Direct Link)
Windows Mobile 2003 ROM Editior ( Direct Link)
Patch (Direct Link)
HimaUpgrateUT (Direct Links)
nk.nbf (Direct link) I made a direct link to a other ftp
Than read this topic: (Tread Url)
It's very easy actually. Remember, Windows 2005 is still very buggy. Don't put your screen into Landscape, If your do a softreset the screen is back to Portrait and the "actually" screen is still in Landscape!!
Check out the XDA FTP folder for Himalaya2005. There is the new version with the full RAM.
Download the .rar file from within this folder, unzipp it on your PC into a folder, then run the .exe file within this folder. Done
Of course, you first have to put your XDAII into bootloader mode before you run the .exe file. (bootloader mode: Powerbutton, resetbutton + directional pad left).
Cheers
Pat
Hi,
I have upgrade it to WM2005. But my SDIO wifi not working and the storage memory is only left 9mb. Is there anything to be done after the upgrade? What about those people discussing Ramdisk or something like that and those .cab file?
Thanks
rmhtoh, have you upgraded with the latest FULL RAM version? I think you still used the old limited RAM version. Check out the FTP folder Himalaya2005. The new version is there.
That will solve the memory problem. You don't need the RAM disk anymore.
For the SDIO WLAN, download the SMARTPHONE driver from socket. There is another post in this forum about it.
http://forum.xda-developers.com/viewtopic.php?p=115883#115883
Cheers
Pat
Is there a way to upgrade without putting the xda into bootloader mode? my power button has broken. thanks
who is the last version of wm5?
demstav said:
Is there a way to upgrade without putting the xda into bootloader mode? my power button has broken. thanks
Click to expand...
Click to collapse
I dont think you can land to bootloader screen without pressing the power button.
to get into boot loader mode
just run the setup once with the hima clearcode file and then u will land up in bootloader mode. and then it will give error and then run the setup and it will work..
cheers..
onkars
Yeah, just make sure you put this file (HimaClearJumpCode.exe) in the same folder (on the PC) and execute HimaUpgradeUt.exe.
WARNING: Do not copy HimaClearJumpCode.exe to your Pocket PC!!!
If it fails, try it again and will go through just fine the second time.
Hi, is there any way to extract today plug-in which shows baterry, free ram, free rom a backlight intensity.. from original HP rom???
i have installed wm6 rom (remake of atom exec rom) and there isn't this plug-in... help me I miss it!
Hi, look for a software called Today panel pro...its cool!
could somebody extract it??? it must be somewhere in hp windows folder....
kosmodisk said:
Hi, is there any way to extract today plug-in which shows baterry, free ram, free rom a backlight intensity.. from original HP rom???
i have installed wm6 rom (remake of atom exec rom) and there isn't this plug-in... help me I miss it!
Click to expand...
Click to collapse
you put WM6 in the iPAQ rw6815.
How do you do that, i am looking to do also....please help
I have the dutch version.
dont look at my english
onkeltje said:
you put WM6 in the iPAQ rw6815.
How do you do that, i am looking to do also....please help
I have the dutch version.
dont look at my english
Click to expand...
Click to collapse
hi there,
try the post PDAVIET in this atom mobile 6
hy... i'm having problems with my hp ipaq rw6815..home screen flashing
i tryed to make an update and the connection was lost since then it never started... it stays on home screen and it restarts....can anyone give me some help? ... thanks...excuse my english...
aleczar said:
i tryed to make an update and the connection was lost since then it never started... it stays on home screen and it restarts....can anyone give me some help? ... thanks...excuse my english...
Click to expand...
Click to collapse
Yes you still could have an choice to use your fone back in running condition
You can google the hp ipaq rw6815 Rom on xda forum you will found it then download the which can be installed by SD Card and do the further steps given below.
Step by step upgrade 68xx ROM via SD Card
Remember you should have fully charged battery !!!!!!!
1. Extract and copy diskimg.nb0 and cabs folder into a SD card (FAT32 and Blank SD Card are recommended, Kingstone MD-SD not recomended)
2. Press and hold 2 soft key( - ) and reset, Boot loader will show up.
3. Wait abut 10 ~ 20 Minutes
4. Align Screen, adjust time and date
5. Restart your 68xx
Hope your devive will work again.
Have a nice day
References:
http://forum.xda-developers.com/showthread.php?p=1840788
http://forum.xda-developers.com/showthread.php?p=1684559&highlight=EBOOT.NB0#post1684559
chartreux said:
No, don't use the EBOOT from the ATOM EXEC(MN2). you must use MN1(from ATOM STD). I had attached it to you.
here is the step.
1. copy eboot.nb0 to your SD-CARD (in the root) and insert your card to your ATOM EXEC
2. preset camera+reset
3. you will see the progress status (wait until your device off)
4. TAKE out your SD-card
5. preset camera+reset again (you will see MN1 bootloader)
6. hook up your USB
7. run software update utility (you may use WM5 or WM6 EXEC ROM)
8. wait until 6% stack on extended ROM (you will see failed status on your bootloader screen during update ext ROM)
9. press on/off + reset perform hard reset
10. your windows will be up and able to sync with activesync. (your bootloader now MN2 again!!)
11. now you may perform the DSUU and this time your EXT rom will be update successfully.
12. delete EBOOT.bin from your SD card
13. done and enjoy.
please beware, you are playing the most dangerous part now.
Click to expand...
Click to collapse
Follow by the instruction.
I use the 2GB Mini SD card to flash the MN2 bootloader to MN1.
Before I copy the EBOOT.nb0, I format the MiniSD and I had confirmed the card can be read in AtomExec.
The screen display "transfer completed" after I inserted the MiniSD and press camera+reset.
After the message was shown, no response come out in next 3 - 5 minutes.
So I press camera+reset again.
The Atom Exec will load in MN2 bootloader again.
I got a trouble in step3.
I had tried the Atom EBOOT.nb0 & Atom Exec Offical WM5 EBOOT.nb0.
Both of them are same, after the message come out and nothing to do.
Any solution I can go back to WM5 ?
I'm can not stad for the AtomExec unable to use the Bluetooth headset while in phone call.
Try to use 256MB memorycard.
Is there can not use in 2 GB ??
it is because I have not 256 MB MINI SD......
admin88hk said:
Is there can not use in 2 GB ??
it is because I have not 256 MB MINI SD......
Click to expand...
Click to collapse
It's been proofed in WIKI and it's work. Try it.
Maybe the problem is you have to borrow 256MB or 512 MB
admin88hk said:
Is there can not use in 2 GB ??
it is because I have not 256 MB MINI SD......
Click to expand...
Click to collapse
For some brand, 2gb mini sd can't used for sdflashing. I have 2gb V-Gen and i can flashing with it.
do you know that can I use Kingston to do the flashing ??
to hiro77, thx for your reply, I am lookig for my friends which have 256MB Mini SD
SDflashing tested by me:
- 256MB: V-Gen/MCPro=OKE
- 512MB: V-Gen=OKE
- 1GB: V-Gen/MCPro=FORGET IT
- 2GB: V-Gen=OKE
Thank you very much for chartreux, hiro77, abusalza, katon808, tjlabais and homer.
I am using a 64 MB MiniSD Card succuessfully roll back to WM5 today.
All step are smoothly.
admin88hk said:
Thank you very much for chartreux, hiro77, abusalza, katon808, tjlabais and homer.
I am using a 64 MB MiniSD Card succuessfully roll back to WM5 today.
All step are smoothly.
Click to expand...
Click to collapse
Hi,
can you help me where I can download the Atom Exec WM5 EBOOT.nb0 file.
thanks
Same me
when i cannot find eBoot.nb0 form Office ROM.
I use eBoot.nb0 from Atom/Atom Pure WM 6.0 Kumara Touch New
Extract to folder.
-I copy it to 1 Gb Kingston MiniSD.
-Hard Reset I found my Atom Exec get MN1 Loader file.
-My Atom Exec Show Load eBoot and Ignore other. Cuase MiniSD Have 1 file only.
-when finish and show soft reset.
I remove my MiniSD and Camera+Softreset to MN1 boot loader mode.
-Connect to USB. Pc have sound 1 time.
-I use WM5 Office ROM upgrade it.
You will found error 6% in stage 3 Extended Rom.
Don't warry it's bug normally of WM5 Office ROM.
You must Hard Reset and Default Factory by CallKey+EndCallKey.
No Aligment, No Setting Time, when PC found new hardware.
You will try upgrade by WM5 Office ROM again for get Extended ROM and
other.
OK, Hard Reset for finish or Upgrade to WM 6.1 as Me.
today, I finding solution for upgrade my Atom Exec all time.
Cause I Noob for It. And my old PocketPC is Atom Black.
It's has upgrade flow differrence my old PocketPC.
But, This time i understand Atom Exec upgrade and Error 6% Now.
Hope, Your found the way for clear your problem.
The Power still with you.
mikomarco said:
Hi,
can you help me where I can download the Atom Exec WM5 EBOOT.nb0 file.
thanks
Click to expand...
Click to collapse
If you can read chinese you can find EBOOT.nb0 at here
otherwise you can find at here
Hey all. Am new to the forums.
I want to put Windows Mobile 6 on my o2 XDA Atom. Its currently got stock parts and stock WM.. How do I go about installing it?
Could someone go through the step in how to install it? in simple terms?
Go on. Help a n00b out
James
you have to take a look at another thread in this atom section, there's a bunch of flashing method already!
wm6 installation
hello
if u want to install window6, the thread ur using 1st copy that thread into your c drive windows/temp folder than u extract that folder from that run devise software utility, main thing while you run this program close all the other software which is running in ur pc, otherwise handset may cause damage it is better to close all the application in ur pc, take out the sim card & memory card then u will enjoy after installing the software in the handset
thanking you
mahendra