Hi, is there any way to extract today plug-in which shows baterry, free ram, free rom a backlight intensity.. from original HP rom???
i have installed wm6 rom (remake of atom exec rom) and there isn't this plug-in... help me I miss it!
Hi, look for a software called Today panel pro...its cool!
could somebody extract it??? it must be somewhere in hp windows folder....
kosmodisk said:
Hi, is there any way to extract today plug-in which shows baterry, free ram, free rom a backlight intensity.. from original HP rom???
i have installed wm6 rom (remake of atom exec rom) and there isn't this plug-in... help me I miss it!
Click to expand...
Click to collapse
you put WM6 in the iPAQ rw6815.
How do you do that, i am looking to do also....please help
I have the dutch version.
dont look at my english
onkeltje said:
you put WM6 in the iPAQ rw6815.
How do you do that, i am looking to do also....please help
I have the dutch version.
dont look at my english
Click to expand...
Click to collapse
hi there,
try the post PDAVIET in this atom mobile 6
hy... i'm having problems with my hp ipaq rw6815..home screen flashing
i tryed to make an update and the connection was lost since then it never started... it stays on home screen and it restarts....can anyone give me some help? ... thanks...excuse my english...
aleczar said:
i tryed to make an update and the connection was lost since then it never started... it stays on home screen and it restarts....can anyone give me some help? ... thanks...excuse my english...
Click to expand...
Click to collapse
Yes you still could have an choice to use your fone back in running condition
You can google the hp ipaq rw6815 Rom on xda forum you will found it then download the which can be installed by SD Card and do the further steps given below.
Step by step upgrade 68xx ROM via SD Card
Remember you should have fully charged battery !!!!!!!
1. Extract and copy diskimg.nb0 and cabs folder into a SD card (FAT32 and Blank SD Card are recommended, Kingstone MD-SD not recomended)
2. Press and hold 2 soft key( - ) and reset, Boot loader will show up.
3. Wait abut 10 ~ 20 Minutes
4. Align Screen, adjust time and date
5. Restart your 68xx
Hope your devive will work again.
Have a nice day
Related
Dear
Friends
I need to help’s your.
a little while ago I upgradede my xda Atom rom.( from Xda-Atom-ENG-20060426 to Xda-Atom-Exec-ENG-20060721)
But not worked (in navigation pad )centre key.
I decided to downgrade my xda atom rom. I maked source this subject and find this page : Mr. tjs0509 wrote (member) http://forum.xda-developers.com/showthread.php?t=276664
tjs0509 said:
1. Download the 20060426 from www.seeo2.com
2. Run DSUU, after extracting the files in directory windows\temp DO NOT CLICK NEXT
3. Copy all 6 files into temporary or another directory
4. From that 6 files, copy 2 files with the extention nb0 (diskimage_ver.nb0 and eboot.nb0) to your mini SD
5. After copying into your mini SD, rename diskimage_ver.nb0 into diskimg.nb0
6. Now, you can run bootloader by pressing camera and soft reset ( you have to put your mini SD into your Atom so that the bootloader will boot from mini SD
7. Just wait and if there is some error message do not bother them, the most important that downloading OS Image and Eboot
8. After that your screen will blank, do not worry or panic
9. Pull out your mini SD and connect USB to PC and run bootloader again
( please make sure that your usb already connected to pc )
10. Now u can normally run the 20060426
Click to expand...
Click to collapse
I applied his descriptions. But my xda atom not worked ... not open... not work any keys... black screen ....
If have you knowledge about This subject , how can I repair it .?
Please ! please informe me....
Best wishes
Is anybody can help you.I have same problem.New atom exec software running properly on my device, but phone function is not running.
tatarogul said:
Dear
Friends
I need to help’s your.
a little while ago I upgradede my xda Atom rom.( from Xda-Atom-ENG-20060426 to Xda-Atom-Exec-ENG-20060721)
But not worked (in navigation pad )centre key.
I decided to downgrade my xda atom rom. I maked source this subject and find this page : Mr. tjs0509 wrote (member) http://forum.xda-developers.com/showthread.php?t=276664
I applied his descriptions. But my xda atom not worked ... not open... not work any keys... black screen ....
If have you knowledge about This subject , how can I repair it .?
Please ! please informe me....
Best wishes
Click to expand...
Click to collapse
you cannot fix yourself, you must send to O2, the method you used killed the bootloader.
NOT FOR ATOM EXEC NOR HP6800 SERIES.
First of all this ROM is basically an extension over JIGGS AKU 0.7 ROM ..
Thanks to Jiggs() , medkid(wonderful tutorial) , Garmin (Thanks Mate!), abusalza for his kitchen and all the other community members
The Rom is 6MB PAGEPOOL.... and includes the following.. :-
1. HTC DIALER (comes pre-installed)
2. Total Commander
4. HTC communication manager(thanks ckaidi)
5. S2U2 (Thanks A_C ,Comes with Custom HTC theme again pre-installed)
6. Network wizard
7. WM5torage 1.78 beta 2
8. HTC keypad , HTC Keyboard(with T9 Input )
9. Some registry tweaks(basically copied from ckaidi's ROM )
10.Ok , now the BIGDEAL , as soon as you are over with installing all the Apps included in the ROM , THE HTC CUBE WORKS (WITH FINGER ACTIVATION ,NO NEED TO DELETE STARTUP ITEMS OR ANYTHING)
11.HTC Audio Manager and the Plugin..
12.FINGER SCROLL CONTACTS , comes pre configured with default softkey etc..(icontacts )
13.Many other Misc. add-ons also included[/SIZE]
So Basically it has all the things based on HTC TOUCH available for our atom
As you know this is MY FIRST ROM , i ll be very glad if some of you do go ahead and try it out and let me know how it goes...
The free RAM is about - 20 -22 MB(with cube , S2U2 , and HTC HOME running)
Free Storage :- 35 Mb.
Download Link :-
Rapidshare
Megaupload
4Shared
Now to installation part -
1. Put device to bootloader mode: (CAMERA+RESET)
2. Connect device to PC under Windows XP using USB cable
3. Run the executable ATOMWM607...EXE
4. Follow on-screen procedure
After installation is complete , on the first boot you will be asked to install programs , please dont skip any one of them as this may result in malfunction .. , and also install 1 , 2, 4 .cab files on your phone memory when prompted
After all the programs are installed and you have rebooted once ..
Go to Programs MENU and open SIM MANAGER ,copy all your contacts to phone memory .
NOW REBOOT AGAIN..
After this you are all set to go , the left softkey opens up communication manager , the right key opens up the new contacts application .
A LEFT TO RIGHT MOVEMENT ON THE SCREEN WOULD RESULT IN OPENING OF THE CUBE.
Further Advice :-
1. After installing go to today > plugins and disable wireless..
2. Go to Programs > Accesories > IM SELECTOR and choose the keyboard of your choice..
3. I have also included Flash Video Bundle in an seperate folder when you UNRAR the rom ... you can install it along with TCPMP player to view sites like Youtube etc..
So i am now uploading and the link will be up soon also , will be posting some screenshots..
Special Note:
This is NOT an OFFICIAL ROM. You can not expect support from O2 by bringing in your device with this ROM. Neither should you contact them for support on this ROM. By downloading and upgrading your device with this ROM, you agree to the considerable risk of bricking your device; and that I can not be held liable for damage brought about by the usage of this ROM.
Side Note: This will not SIM unlock or change your mobile serial no. (IMEI) in any way. You can flash back to original ROM anytime! Do not attempt to flash this on ATOM EXEC! If you get COUNTRY ID ERROR, you did not follow steps above. Do NOT restore from spb / sprite full backup, this will overwrite system files and make your device unstable; worse, unusable.
NEVER ATTEMPT TO UPDATE YOUR DEVICE USING SD CARD FLASHING!!!
OK , here's something OT , i have rar'd some themes download here
Congratulations,Udayrulz!
I hope you can upload it to other sites as a lot of us are having trouble downloading with rapidshare.
WoW udayrulz just installed works great mate
Great to hear guys , @Bryan did u manage to install it mate so howz it
@Rhinayon - Mate a new Megaupload mirror will be available within 30 minutes
udayrulz said:
Great to hear guys , @Bryan did u manage to install it mate so howz it
@Rhinayon - Mate a new Megaupload mirror will be available within 30 minutes
Click to expand...
Click to collapse
THNKS 4 UR eford
CAN U provide another mirror
4shared >> eg.
http://www.4shared.com/
or , MediaFire
http://www.mediafire.com/index.php
I REALY app.
Will megaupload do?? ,just finished with it CHECK FIRST POST FOR THE LINK
udayrulz said:
Will megaupload do?? ,just finished with it CHECK FIRST POST FOR THE LINK
Click to expand...
Click to collapse
NO >> megaupload can not
Then you will have to wait around 25 minutes , as i am loading to 4shared
udayrulz said:
Then you will have to wait around 25 minutes , as i am loading to 4shared
Click to expand...
Click to collapse
OK
thnks
Link Added
udayrulz said:
Link Added
Click to expand...
Click to collapse
1,000,000 THNKS
Hey there, thanks for the rom!
I'm having trouble and keep on getting "Connection Error" after running DSUU under "MN2 Bootloader"?
I flashed my ATOM to Atom Exec (Xda-Atom-Exec-ENG-20060721-MOT0822), is this the problem??
Thanks guys!
Disable Wireless?!
udayrulz, you did a good job on this, but what did you mean by disable wireless plugin? so we can't use Wifi wish this room? Anyway, I'm downloading and will let you know if something wrong
And... Thanks alot for the room, this is what I have been waiting for
Y does the file name says 8PP wherein you stated in the first page is 6pp? please advise?
a very good effort!!
For me Im still waiting for Jiggs to finish up the Cert issues before i cook a ROM for you guys
But no hurry to Jiggs, Im very very grateful to this wm6 aku0.7a already!!
Love this forum manz, where so many bros CARING AND SHARING!!! yeah!!
>.< great job =) but i have a dumb qns i dont seems to be able to bring up the htc cube haha any words of advise lol
Pagepool
what is ment by pagepool and what is the use of it.
@icecool -- Mate , have you installed all the Cabs??(1 , 2 , 4 from extended ROM) on your phone memory , if so please try and use your stylus and move it from left to right in middle of the screen , that will activate the CUBE
@Brian -- Its a Naming Error , my bad
jackkkkk said:
Hey there, thanks for the rom!
I'm having trouble and keep on getting "Connection Error" after running DSUU under "MN2 Bootloader"?
I flashed my ATOM to Atom Exec (Xda-Atom-Exec-ENG-20060721-MOT0822), is this the problem??
Thanks guys!
Click to expand...
Click to collapse
You have done a blunder mate , please never flash an ATOM EXEC ROM on your ATOM as this will cause the Bootloader to malfunction ..
However a fix for this is available -- Check out the ATOM WIKI page - The Fix is somewhere there
PM me if you have problems
ronalddo said:
udayrulz, you did a good job on this, but what did you mean by disable wireless plugin? so we can't use Wifi wish this room? Anyway, I'm downloading and will let you know if something wrong
And... Thanks alot for the room, this is what I have been waiting for
Click to expand...
Click to collapse
OH , no i just meant to disable the plugin from you today screen as the left softkey now opens up the new communication manager
References:
http://forum.xda-developers.com/showthread.php?p=1840788
http://forum.xda-developers.com/showthread.php?p=1684559&highlight=EBOOT.NB0#post1684559
chartreux said:
No, don't use the EBOOT from the ATOM EXEC(MN2). you must use MN1(from ATOM STD). I had attached it to you.
here is the step.
1. copy eboot.nb0 to your SD-CARD (in the root) and insert your card to your ATOM EXEC
2. preset camera+reset
3. you will see the progress status (wait until your device off)
4. TAKE out your SD-card
5. preset camera+reset again (you will see MN1 bootloader)
6. hook up your USB
7. run software update utility (you may use WM5 or WM6 EXEC ROM)
8. wait until 6% stack on extended ROM (you will see failed status on your bootloader screen during update ext ROM)
9. press on/off + reset perform hard reset
10. your windows will be up and able to sync with activesync. (your bootloader now MN2 again!!)
11. now you may perform the DSUU and this time your EXT rom will be update successfully.
12. delete EBOOT.bin from your SD card
13. done and enjoy.
please beware, you are playing the most dangerous part now.
Click to expand...
Click to collapse
Follow by the instruction.
I use the 2GB Mini SD card to flash the MN2 bootloader to MN1.
Before I copy the EBOOT.nb0, I format the MiniSD and I had confirmed the card can be read in AtomExec.
The screen display "transfer completed" after I inserted the MiniSD and press camera+reset.
After the message was shown, no response come out in next 3 - 5 minutes.
So I press camera+reset again.
The Atom Exec will load in MN2 bootloader again.
I got a trouble in step3.
I had tried the Atom EBOOT.nb0 & Atom Exec Offical WM5 EBOOT.nb0.
Both of them are same, after the message come out and nothing to do.
Any solution I can go back to WM5 ?
I'm can not stad for the AtomExec unable to use the Bluetooth headset while in phone call.
Try to use 256MB memorycard.
Is there can not use in 2 GB ??
it is because I have not 256 MB MINI SD......
admin88hk said:
Is there can not use in 2 GB ??
it is because I have not 256 MB MINI SD......
Click to expand...
Click to collapse
It's been proofed in WIKI and it's work. Try it.
Maybe the problem is you have to borrow 256MB or 512 MB
admin88hk said:
Is there can not use in 2 GB ??
it is because I have not 256 MB MINI SD......
Click to expand...
Click to collapse
For some brand, 2gb mini sd can't used for sdflashing. I have 2gb V-Gen and i can flashing with it.
do you know that can I use Kingston to do the flashing ??
to hiro77, thx for your reply, I am lookig for my friends which have 256MB Mini SD
SDflashing tested by me:
- 256MB: V-Gen/MCPro=OKE
- 512MB: V-Gen=OKE
- 1GB: V-Gen/MCPro=FORGET IT
- 2GB: V-Gen=OKE
Thank you very much for chartreux, hiro77, abusalza, katon808, tjlabais and homer.
I am using a 64 MB MiniSD Card succuessfully roll back to WM5 today.
All step are smoothly.
admin88hk said:
Thank you very much for chartreux, hiro77, abusalza, katon808, tjlabais and homer.
I am using a 64 MB MiniSD Card succuessfully roll back to WM5 today.
All step are smoothly.
Click to expand...
Click to collapse
Hi,
can you help me where I can download the Atom Exec WM5 EBOOT.nb0 file.
thanks
Same me
when i cannot find eBoot.nb0 form Office ROM.
I use eBoot.nb0 from Atom/Atom Pure WM 6.0 Kumara Touch New
Extract to folder.
-I copy it to 1 Gb Kingston MiniSD.
-Hard Reset I found my Atom Exec get MN1 Loader file.
-My Atom Exec Show Load eBoot and Ignore other. Cuase MiniSD Have 1 file only.
-when finish and show soft reset.
I remove my MiniSD and Camera+Softreset to MN1 boot loader mode.
-Connect to USB. Pc have sound 1 time.
-I use WM5 Office ROM upgrade it.
You will found error 6% in stage 3 Extended Rom.
Don't warry it's bug normally of WM5 Office ROM.
You must Hard Reset and Default Factory by CallKey+EndCallKey.
No Aligment, No Setting Time, when PC found new hardware.
You will try upgrade by WM5 Office ROM again for get Extended ROM and
other.
OK, Hard Reset for finish or Upgrade to WM 6.1 as Me.
today, I finding solution for upgrade my Atom Exec all time.
Cause I Noob for It. And my old PocketPC is Atom Black.
It's has upgrade flow differrence my old PocketPC.
But, This time i understand Atom Exec upgrade and Error 6% Now.
Hope, Your found the way for clear your problem.
The Power still with you.
mikomarco said:
Hi,
can you help me where I can download the Atom Exec WM5 EBOOT.nb0 file.
thanks
Click to expand...
Click to collapse
If you can read chinese you can find EBOOT.nb0 at here
otherwise you can find at here
Can some one know how can I get windows 6.1 for my dopod 838pro and installation procedure. I saw some preview from youtube that it will work like htc touch pro or touch diamond. http://www.youtube.com/watch?v=PsSNzYftjZs
OK, look at the top bar, You should see a word that looks like this - "Search". Click on it, type in a request making sure to specify the hermes. Wow, answers galore....
Sorry I tried my level best but I can't find any wm 6.1 for my dopod 838pro. Can you plz give me any direct download link in english version. My present rom
ROM: 3.54.707.3 (07/05/07)
Radio: 1.47.00.10
Protocol: 32.80.7020.20H
Try the WM06 part of the forum, I believe heres a sticky with a heap of cooked roms and the new WM6.5 in production on various posts....
At least tell us you Hard SPLed your Hermes, look here - http://forum.xda-developers.com/showthread.php?t=296722
You need to do this BEFORE upgrading the rom. You need Hard SPL V7.
I got problem to instal spl v7. When trying to update it after a certain next, the display gone multi color and it says that connection is no longer exist. when I check spl on my device it shows spl 2.03. I am using vista home. What to do. Sorry for bother you again.
Go to page 116,post 1160 of thread I gave you. It tells you how to install Hard SPL with the sd card.
Just remember, the sd card MUST be 2Gb or less, it has to formatted FAT32 and the spelling of hermimg.nbh is VERY important.
Cheers...
Thanks bro fainally I made it.
I still can't find the wm6.1 upgrade page. I tried HardSPL 7, it finishes in an instance, how do i check whether i have HardSPL it?
And where do i find the update for 6.1? I'm pretty new to all this, so I am kinda blur and lost now~
@ultramag69 i tried Hard-SPL-V7 with the help of this instruction http://forum.xda-developers.com/showthread.php?t=296722&page=116 and mobile said update in progress bfor half an hour and still its in progress it ill complete or is it in problem can i remove battery?....................
still update in progress more than 45 mins is this complete can i remove battery anyone pls help me..........
after one hour its in progress so i removed battery now mobile not power up not enter in to boot mode any solution? any one pls help me.................
Just Did my phone for the first time
Go to this link first and make sure your phone has the latest version installed.
http://forum.xda-developers.com/showthread.php?t=296722
Follow the sets it's easy enough
After you soft reset your phone
That being done you'r now ready to flash a new rom there are plenty on the hermes windows mobile 6 thread
http://forum.xda-developers.com/forumdisplay.php?f=355
I found this rom to be the most like the one on the u-tube video
http://forum.xda-developers.com/showthread.php?t=461490
Down load the rom, extract the files
rename the ruu_sgned file to "Hermimg"
Now put a micro SD memory card in a card reader
open my computer right click the drive that represents the memory card and format it
choose the fat 32 file system.
now copy the hermimg fie to the root of the card
soft boot your phone
press the power button to comfirm the rom update and watch the progress bar
when complete
reset your phone and the new software will install
if you get a new soft ware installed do you want to reset pick no
the phone will reset when all the software is installed.
great stuff
try a few rom
find the one you like best
sry but you will need to put that card in your phone after you copy hermimg onto it
maybe you should go to the how to unbrick my phone thread
didn,t see that last post
ouch!!
here's the best chance at I solution
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Go here
I hope you find an answer
Brief Introduction
Code:
As what I've promised before, it's right here. Please report for any existed
bugs.
For guys who think that the automatically running ActiveSync is a bug, you can
use the "patch" attached - but I myself don't think that it is.
ROM Information
MWG Atom Life WM6.1 ROM WWE_080410_B2_DS
OS Core: CE OS 5.2.21057 (Build 21057.1.6.10)
Pagepool Size: 6 MB
OEM Softwares Removed
Aplix Jblend
Quanta Image Editor
Quanta Media Album
Quanta Setup Wizard
Visual On Streaming Media Player
Westtek ClearVue PDF Viewer
OEM Softwares Implantated
All the MWG OEM softwares (Except those listed above)
Adobe Flash Lite 3.1 (IEActiveX version: 9.1.122.270)
Adobe Reader LE 2.5.1.0.404840.06
Arcsoft MMS Version 5.2.2.66
Cyberon Voice Speed Dial Version 1.2 Build 100303
Esmertec Jbed 20090506.2.1
HTC Boot Launcher Version 1.0.1915.2530.2
LockStream Version 1.2.20100721
Microsoft .NET Compact Framework Version 3.5.9198.0
Microsoft Internet Explorer Mobile Version 7.11
Microsoft Office Mobile Version 6.1
Microsoft SQL Server Compact 3.5.5692.0
Microsoft Windows Live for Windows Mobile Version 10.7.0059.0600.1000
Microsoft Windows Media Player 10 Mobile for Pocket PC Version 10.3 Build 21057
Visual On Streaming Source Filter Version 2.7.2014.1626.00
Downloads
MWG Atom Life WM6.1 ROM WWE_080410_B2_DS (52.54 MB)
Try it first..........
Could U give a screenshot ? And how many Free RAM with this ROM ?
( The 1st tester Lol......... )
Abhy-Boy said:
Could U give a screenshot ? And how many Free RAM with this ROM ?
( The 1st tester Lol......... )
Click to expand...
Click to collapse
Sorry, I can't. I've applied a lot of changes in settings and installed a couple of softwares into my device already...
But it is MWG-like. It can be regarded as an official update from MWG.
You're really the first one!
About the free RAM at startup... I can get over than 24,000 KB at the moment(I had installed a lot softwares). I didn't apply any changes to the cache of file system, which means the cache size is still 2 MB as default.
It's as much as you can get in the latest official WM6 ROM, right?
aa125690 said:
About the free RAM at startup... I can get over than 24,000 KB at the moment(I had installed a lot softwares). I didn't apply any changes to the cache of file system, which means the cache size is still 2 MB as default.
It's as much as you can get in the latest official WM6 ROM, right?
Click to expand...
Click to collapse
I hope Your new ROM can give more Free RAM. Your Build 21056 only give me about 13Mb Free RAM after install all application that I need. So hard download from Mediafire Lol..................
Have finished download, and now I'm using your ROM and add all Apllication ( and games too ) that I need. About 14,55 Mb Free of RAM and only have 651,71 Mb Free of Storage. Cool..............
Downloaded!!!!
how to install this .DIO file
Shoaib.Khan said:
Downloaded!!!!
how to install this .DIO file
Click to expand...
Click to collapse
Like Bajok! says :
HOW TO FLASH THE ROM:
1. You must have at least 70% battery.
2. Use mini-SD card and format it to FAT16 (use only 2GB capacity and below, don't use SDHC card!)
3. Copy AL1.DIO to card.
4. Insert card to memory slot of your device. Press and hold record button (beside the camera button) then push reset button with your stylus. Wait until BOOTLOADER mode appears saying "SD CARD DETECTED", release the record button.
5. Wait 'til it finishes until the O2 logo and splash screen appear. Follow the on screen steps. HAPPY FLASHING!!!
Thanks your ROM is very light, fast and battery usage is very good with this..
I surprised!! solved my problem for years on battery usage problems.
Just had to say thanks, sadly last week my old faithful HTC TYTN died, and i almost cried, and i had to get another PDA.
The one i got was an 02 Atom Life, however the stock rom wouldnt run some of the apps i use and depend apon, and couldnt do some basic stuff like send the USSD to get credit info (*100#), so i tried the official 6.1 update which still didnt run my app, or allow me access to my info, then i tried this Rom.
Everything goes again, (including USSD) ive tried your 6.5's but frankly I prefer this one alot much more, I just wanted you to know I appreciate your effort to the community.
The problem i have it they layout for the 6.5, do you have a 6.5 with the 6.1 Setup? If so i would gladly test it for you.
Regards
Andrew (New Zealand)
sastyh said:
Just had to say thanks, sadly last week my old faithful HTC TYTN died, and i almost cried, and i had to get another PDA.
The one i got was an 02 Atom Life, however the stock rom wouldnt run some of the apps i use and depend apon, and couldnt do some basic stuff like send the USSD to get credit info (*100#), so i tried the official 6.1 update which still didnt run my app, or allow me access to my info, then i tried this Rom.
Everything goes again, (including USSD) ive tried your 6.5's but frankly I prefer this one alot much more, I just wanted you to know I appreciate your effort to the community.
The problem i have it they layout for the 6.5, do you have a 6.5 with the 6.1 Setup? If so i would gladly test it for you.
Regards
Andrew (New Zealand)
Click to expand...
Click to collapse
I'm sorry, but I couldn't understand your last question... I beg your pardon?
Sorry, ill phrase it better,
with your WM6.5 roms i noticed they didnt have the standard start menu, like the WM5.0 / WM6.1, it instead your WM 6.5 has the touchflo type menu.
Is it possible to make a 6.5 rom without the touchflo ?
or can the touchflo be turned off so the old start menu works?
sastyh said:
Sorry, ill phrase it better,
with your WM6.5 roms i noticed they didnt have the standard start menu, like the WM5.0 / WM6.1, it instead your WM 6.5 has the touchflo type menu.
Is it possible to make a 6.5 rom without the touchflo ?
or can the touchflo be turned off so the old start menu works?
Click to expand...
Click to collapse
Yes... There're two ways that you could be able to use WM6.1-styled Start Menu, but both are not perfect neither:
1. Use the QuickMenu instead.
2. Recook a WM6.5 with a hexed shell32.exe file(by Sun_Dream in DFT) and other WM6.1 DPI and Lang *.dll files. I have just cooked one and that was under tweaked, but unfortunately my device broke again in the day before yesterday... So I'm afraid that you may have to cook it yourself.
My device is fixed now. I've got the thing you meant done, but themes of WM6.5 or later are not applicable for this ROM. The WM6.5 lockscreen and Titanium are not present as well...
So does anyone want to try that?
hi aa125690, been almost a year but this rom is fine!
I have a problem here =
1. when i flash the rom back to MWG original rom (.exe) through dsuu I can't find "wireless tab" under setting-connection-wifi.
2. same thing happen using original O2 wm5 or wm6 rom. no wireless tab inside.
I thought this was DSUU problem so I did =
3. using modified flash.dio as al1.dio from both original O2 rom (miniSD mode) resulting the same.
4. using modified flash.dio as al1.dio from original mwg rom (miniSD mode) resulting the same.
many hard-resets but they solve nothing. strange thing is = all rom from this xda-developer site (from you, bajok!, chrisch, etc, which are all minisd mode) are free from this problem. do you have any idea?
I just wanted to feel the "old feeling" when the atomlife was still on wm5 just like old time.