Hi all,
I've been looking for the location to download the Rom Update Utility, but, so far have been unsuccessful. Can anyone point me to a link?
Thanks in Advance
OK, I just started the SuperCID unlock and MaUpgradeUt_noID.exe looks similar to the screenshots for the RUU; Is it the same thing?
ok, i figured it out. Yes, I'm an idiot.
Related
I currently have radio version 1.34 and need to downgrade to 1.16 bekuzz im sending my phone back to Cingular.i have beentold that it is possible thru des's awesome SSPL program but that i need the radio in NBH format. i have it it in NBF. I checked the WIKI and didnt see anything about flashing the radio in the nbh format. any help or direction would be greatly appreciated. if i missed something while reading the wiki i apologize in advance. thanx.
koolhand79 said:
I currently have radio version 1.34 and need to downgrade to 1.16 bekuzz im sending my phone back to Cingular.i have beentold that it is possible thru des's awesome SSPL program but that i need the radio in NBH format. i have it it in NBF. I checked the WIKI and didnt see anything about flashing the radio in the nbh format. any help or direction would be greatly appreciated. if i missed something while reading the wiki i apologize in advance. thanx.
Click to expand...
Click to collapse
go on the Full ROMs list and find out which full ROM has your Radio on it.
download it, extract the NBH and separate it; rebuild it into an NBH with all the components your original was comprised of, flash it and you're done.
i have seperated the NBh files and im stuck there im not sure how im supposed to rebuild it. a little more direction please
koolhand79 said:
i have seperated the NBh files and im stuck there im not sure how im supposed to rebuild it. a little more direction please
Click to expand...
Click to collapse
Search the Forum for NBHGen...
um dont make this so hard... just go to www.htcamerica.net and download the official shipped rom and flash it to your phone before shipping it back!
edit
here is the exact link http://www.htcamerica.net/support/docs/ruu_hermes_1.34.502.1_1.16.00.00_wwe_cws_ship.exe
i also wanted to add that this will downgrade your radio in the process as well as give it the official shipped rom!
thank u all for the help. Just out of curiousity what is the difference in the one from HTC and the one on this site??
koolhand79 said:
thank u all for the help. Just out of curiousity what is the difference in the one from HTC and the one on this site??
Click to expand...
Click to collapse
Unless it specifically states we modified it, none.
Olipro said:
Unless it specifically states we modified it, none.
Click to expand...
Click to collapse
well if thats the case it didnt downgrade the 1.34 radio. will try to flash it again.
i tried the official release from HTC and that does the same thing. new rom same radio. still at 1.35
i have loaded nbhgen onto my computer but im not sure how to run it or how to compose the radio in the format it needs to be in. i have searched the forum but there arent any clear instructions on how to run nbhgen and then put everything back together
I have a new (refurb) Cingular 8525. Ihave been doing a lot of reading and research. The amount of information available here, Is damn near intimidating. The first thing I need to do is flash the radio. The shipped version is 1.16.00.00, and the signal strength is terrible. Since everyone here, sends the newbies to Mr Vanx tutorials that is where I started. I flashed to Olipro 2.10. And my bootloader confirms the flash worked. The next step is to flash the radio. But his instructions say to use autodetect. This does not work. So I went to the Olipro post for v7 and he says in his instructions that autodetect will no longer work, force SSL. But later in that thread when this question is asked, the person is told that if he knows that it is 2.10, then check that box and the one that says is it hard SPL. When I try that it warns that it is for version 1.11...etc. I would really appreciate some good advice. Thank you in advance, for reading this far.
badbert said:
I have a new (refurb) Cingular 8525. Ihave been doing a lot of reading and research. The amount of information available here, Is damn near intimidating. The first thing I need to do is flash the radio. The shipped version is 1.16.00.00, and the signal strength is terrible. Since everyone here, sends the newbies to Mr Vanx tutorials that is where I started. I flashed to Olipro 2.10. And my bootloader confirms the flash worked. The next step is to flash the radio. But his instructions say to use autodetect. This does not work. So I went to the Olipro post for v7 and he says in his instructions that autodetect will no longer work, force SSL. But later in that thread when this question is asked, the person is told that if he knows that it is 2.10, then check that box and the one that says is it hard SPL. When I try that it warns that it is for version 1.11...etc. I would really appreciate some good advice. Thank you in advance, for reading this far.
Click to expand...
Click to collapse
The conflict is actually that the custom_ruu has been updated to properly auto detect. You can either A) get the new Custom_RUU (and that should work) or B) just select Oli2.10 and check the box for HardSPL and keep going.
todd_jg said:
The conflict is actually that the custom_ruu has been updated to properly auto detect. You can either A) get the new Custom_RUU (and that should work) or B) just select Oli2.10 and check the box for HardSPL and keep going.
Click to expand...
Click to collapse
Thank you for your prompt reply. And forgive me for questioning your advice. Is the latest radio 1.50 packaged with the latest Custom RUU? I downloaded the one from This Thread in the resources sticky. And it still could not query the device. And if I try the method you suggested it gives me the following warning:
"Please be aware that this flasher is intended solely for SPL 1.11 and you MUST have 1.11 Hard-SPL installed in order to flash any unsigned files."
Thanks in advance for any help you can provide.
I have flashed my "Wizard" literally (see my signature) hundreds of times. With only a couple of minor errors. I would like to upgrade to WM6, in the very near future. But I paid too much money to brick this sucker!! (Read: My wife would kill me!)
Anyone else have any insight to this? I'm having the same gut wrenching inhibitions about trying out the vp3g rom because of this
"Please be aware that this flasher is intended solely for SPL 1.11 and you MUST have 1.11 Hard-SPL installed in order to flash any unsigned files"
error in the RUU
The RUU from that thread should autodetect, but if it isn't you may have a comm error with your USB. I am 99% sure you can just select and go, but I won't bet your Hermes on it. With HardSPL you are virtually brick-proof. If you use force SSPL, you will bypass HardSPL. I would do the following:
1. While NOT connected to USB, put the phone in bootloader mode
2. Connect the phone to the USB (this will prevent ActiveSync from hogging the port).
3. Start the RUU
4. Manually select Olipro 2.1
5. Do it.
Worked perfectly.. that little notice just made me a bit nervous
No worries - a good craftsman measures twice and cuts once.
l3it3r said:
Worked perfectly.. that little notice just made me a bit nervous
Click to expand...
Click to collapse
Did my quoting the "whole notice" lead you to this post?
Yes, actually!
l3it3r said:
Yes, actually!
Click to expand...
Click to collapse
I wish more people would post like that things would be so much easier to find, Instead we have 3 gazillion posts that say "Somebody help me please!"
The Hermes Wiki needs to be updated as the old Custom RUU is posted and Olipro new RUU is only available in the thread mentioned above. I discovered this a while back and figured it would be changed by now. Leaving the old RUU on the Wiki is problematic and causes confusion for those not in the know.
My 2 cents..
couldn't agree more.
the wiki is a compilation of a communities contributions... You can update it!!!
I try to correct anything I find!
I'd update if I knew what I was talking about! I don't have the latest version of the RUU, and probably won't for some time. This installation went perfectly for me, I don't see the need to change any time soon! But if anyone else has the info, they should deffinately update the wiki
Thank you very much! It was very helpful. I've met this problem too And now it solved.
I was trying to flash a new ROM to my Mogul, but I guess I have done something wrong. I get stuck at the HTC Smart Mobility screen. I have searched the forums and tried the kitchen stuff to build my own NBH file to run from the bootloader, but it says there are no files found. Can anyone help me out? Thanks so much!
Did you upgrade the radio and SPL??
I believe I was upgrading both.
I managed to fix it somehow. It finally read the USB from the bootloader. Thanks for responding though.
I have been searching for it and can't find it. I'm sure I am overlooking it as I am in a hurry. I am trying to restore my phone to stock VZW ROM so I can ship it back. I have already relocked it and am in bootloader 1.06
Please help!
Michael
Edit: I have the RUU but cannot unRAR it. I am getting a non Win32 application error
A simple google search for 'verizon xv6800 ruu' has this as first hit.
http://forum.xda-developers.com/showthread.php?t=376873
I have downloaded RUU and Alreader2 but when I try to open the RUU using Alreader2 I get Alreader2.exe is not a valid Win 32 application
i found wrar38b4 sry for the unnecassary thread!
All,
I downloaded the original Cingular/ATT Rom, just in case, and bought Sprite and backed up my settings. I downloaded SDA_ApplicationUnlock.exe and ran it (from my PC, is this correct?). SDA_ApplicationUnlock.exe seemed to run okay, and gave me the message "SDA Successfully unlocked, Please Reboot SDA Now!". I rebooted my phone and did not notice a change (I assume I should?) I ran the Rom update for WM6.1 Standard, which opened up a DOS-looking box that stayed there forever and did not indicate it was doing anything. After just over an hour I disconnected my phone and rebooted it, no change.
My questions:
1) Do I run SDA_ApplicationUnlock.exe from my PC or from the WM phone itself?
2) Any suggestions as to what I may be doing wrong?
3) What does CID Unlock do, and do I need it?
Just to review, I have a Cingular 3125 with WM5, and I want to go to WM6.1 Standard.
Please help! Thanks!
Frank
geekzilla65
You were supposed to run Jump SPL on your phone which puts it into a special bootloader then run the update utility should run correctly. I personally prefer the MicroSD flash method myself.
Jump SPL?
icecube57 said:
You were supposed to run Jump SPL on your phone which puts it into a special bootloader then run the update utility should run correctly. I personally prefer the MicroSD flash method myself.
Click to expand...
Click to collapse
Thanks icecube57!
I know that SPL files were copied to my phone automatically when I ran Rom updater, but I don't think it ever launched. I am really confused about the CID unlock. I read one post where it says I have to do this, and another that says for Cingular Roms you don't need to.
Also, you mention the MicroSD flash method - is there a post here that explains how to do that? I would not mind trying it if you think it works better. Please help!
Frank
geekzilla65
If i dont say it someone else will. Please use the search function.
If the utility didnt automatically launch the Jump Spl program then navigate to the root of your phone using file explorer start it manually from your phone and it will put the phone into bootloader then try running the utility again. Thats how i had to do it with my phone
Thanks
icecube57 said:
If i dont say it someone else will. Please use the search function.
If the utility didnt automatically launch the Jump Spl program then navigate to the root of your phone using file explorer start it manually from your phone and it will put the phone into bootloader then try running the utility again. Thats how i had to do it with my phone
Click to expand...
Click to collapse
Okay, that's fair, thanks. Can I get an answer on one more thing? I did look in the forums, in the Wiki ,etc. on this - I am still confused on what CID unlock is. I really don't want to brick my phone. When this worked for you, was this on a Cingular 3125? Did you have to CID unlock?
Frank
geekzilla65
What you are talking about permenantly CID unlocks the phone which allows you to flash any rom. Instead of being stuck with carrier specific roms. What the JUMP SPL does is loads a specially modified bootloader that temporarily fakes the Update Utility into thinking your phone is CID unlocked that way you can flash any rom without going through that long complicated process in making it permenantly CID unlocked. I have a 3125 myself and flashes all the roms in this forum fine with the Jumps SPL Bootloader method.
MicroSD Flashing
Im feeling nice. Here is the MicroSD Flashing Method
http://forum.xda-developers.com/showthread.php?t=311232
Thanks!
icecube57 said:
What you are talking about permenantly CID unlocks the phone which allows you to flash any rom. Instead of being stuck with carrier specific roms. What the JUMP SPL does is loads a specially modified bootloader that temporarily fakes the Update Utility into thinking your phone is CID unlocked that way you can flash any rom without going through that long complicated process in making it permenantly CID unlocked. I have a 3125 myself and flashes all the roms in this forum fine with the Jumps SPL Bootloader method.
Click to expand...
Click to collapse
Thanks icecube57!!! I really appreciate the answers! You rock!
Frank
geekzilla65
Thanks!
icecube57 said:
Im feeling nice. Here is the MicroSD Flashing Method
http://forum.xda-developers.com/showthread.php?t=311232
Click to expand...
Click to collapse
Thanks for this one too! Awesome!
Frank
geekzilla65