Related
Hey
I'm hoping someone out there will be able to help me solve this problem or I may be saying goodbye to my Trion sooner than I would like.
So here's the problem:
While I am sleeping my trion keeps LockingUp!
This has happened a few times and each has been quite costly, either I oversleep and am late for important appoitments or I miss a number of very important phone calls.
I have tried using differnt ROMS but the problem persists. It happened to me a couple times while using the new I-mate rom so I switched to the new Dopod ROM and it happened again! I'm going to try the TYTN rom now... ugh!
Info Regarding my current setup:
Dopod ROM: 1.23.707.4
Programs:
MSN Messenger
MSN PPC 2003
TCPMP
Cyberon
Aidem MP3
Fit4cat Hermes v1.0
Fit4cat Settings changed from default:
Enable wireless plugin + show pluggin = ON
Remove Wireless Manager Icon = ON
Mount Ext. ROM = ON
Improve A2DP "High" = ON
- and that's all I've enabled. A weird thing I notice with the wireless pluggin is that at times on the Today screen it will just show my bluetooth status and neglect to show the WIFI status; at times the BT icon is right aligned as if the WIFI was still there but invisible and at other times the BT icon is left aligned indicating the WIFI icon is not even there.
That's about it for now. Any help resolving the main FREEZING/CRASHING issue would be GREATLY appreciated.
Thank You!
I have had the same problem. Hard reset and ran software freefor a few days, and same problem. Flashed to imate, and same problem. Flashed back to original HTC, and problem gone. I don't know what it was/is, but I feel your pain. We have almost no software in common, so whatever it is I think the problem is within the ROM itself or common Ext_Rom files. I never ran without Ext_ROM may start there.
this problem I had for about 3 weeks, I am currently using the new dopod rom and I have had no problems at all. It is a software problem issue and as roms develop issues will go I would flash either the new HTC rom or dopod rom as I had no problem with either of them I installed the dopod as it is quicker for me.
the same to me with imate rom, and some time when i press the center/enter button it show the sound volume panel
must go to Tytn rom tonight
the camera icon is there, but nothing happens when i press it, any suggestions please
Phone?
Original Rom?
New Rom?
You sure don't give folks much to go on.
oops, forgot those details
cingular 8525
old rom i cant remember, forgot to look it up before i flashed, my bad
new rom 3.54.707.3
i've been trying different roms and OS's but no luck
klobbersaurus said:
oops, forgot those details
cingular 8525
old rom i cant remember, forgot to look it up before i flashed, my bad
new rom 3.54.707.3
i've been trying different roms and OS's but no luck
Click to expand...
Click to collapse
You try remapping the buttons?
Settings > Buttons
Often after a ROM upgrade, button mapping will be f'd up, try that.
after tinkering with it for a bit, i got the program to load but i come up with an error, 36001:100:3 failed to initialize video output device, suggestions?
klobbersaurus said:
after tinkering with it for a bit, i got the program to load but i come up with an error, 36001:100:3 failed to initialize video output device, suggestions?
Click to expand...
Click to collapse
I have seen comments about not being able to use the camera in one of the posts relating to the latest Schaps beta release: http://forum.xda-developers.com/showthread.php?t=318589 (take a look) is this the ROM you are using?
In any case I'd suggest that you post this question in the area related to the WM6 ROM that you have changed to then you will most likely be able to get comments from others that have the same ROM (and most likely the very same issue). Such camera issues (hardware fault aside) are most likely to be caused by either the ROM or third party software.
thanks for the reply, im using the black majik rom
Me too
I've got the same problem after flashing to Black Satin (from Shadow) and radio 1.48. (T-Mob UK MDA Vario II)
Have since tried:
Black Satin Medium
Schaps 3.30c
Black Shadow
Radio 1.43
but still no camera The camera button is set to 'Pics and Video' (changing it to 'Camera' doesn't help) and starting camera from Programs just does literally nothing.
I'm checking the Schaps thread again - seems like other have a similar problem which is a little reassuring! Will report back if I get anywhere...
Just seems worrying that flashing back to old ROMs doesn't fix it.
Any other ideas welcome!
sim
tigersim303 said:
I've got the same problem after flashing to Black Satin (from Shadow) and radio 1.48. (T-Mob UK MDA Vario II)
Have since tried:
Black Satin Medium
Schaps 3.30c
Black Shadow
Radio 1.43
but still no camera The camera button is set to 'Pics and Video' (changing it to 'Camera' doesn't help) and starting camera from Programs just does literally nothing.
I'm checking the Schaps thread again - seems like other have a similar problem which is a little reassuring! Will report back if I get anywhere...
Just seems worrying that flashing back to old ROMs doesn't fix it.
Any other ideas welcome!
sim
Click to expand...
Click to collapse
I just encountered the same problem on Schaps current 3.57a ROM on my HTC Hermes. Whatever I try, the camera won't start up. Help would be appreciated...
www.SCHNEISING.de,
I've also tried schaps 3.57a after my last post and still no good. I wouldn't worry if the camera was just broken in one ROM, but the fact that I can't get it back in any ROM is very worrying
Can you try running the flashlight app in that ROM? (Programs->Accessories) That does nothing either, for me...
sim
camera doesnt work after rom flash - solution?
Possible solution http://forum.xda-developers.com/showthread.php?t=384854
Simply take out battery for at least 15 minutes.
i had that problem when there was a shorted capacitor on my front camera board, removing the dead component solved my problem, but it was getting hot at the front.
Please can you post some photos or schemes?
I had a camera failure on my Hermes too ( I'm sure I posted about it on here somewhere but I can't find it now). The battery was also draining quickly (<7 hours). After much messing about with reflashes etc, I cracked the device open, removed the rear camera module and noticed green oxidisation on the contact. Cleaned this up with contact cleaner, reassembled and the problem was solved!
Referred to the Hermes Service Manual for dissassembly info: http://forum.xda-developers.com/showthread.php?t=340426
Hope this helps,
sim
ETA: http://forum.xda-developers.com/showpost.php?p=2012393&postcount=41
did you tryes cool camera software?
I have same probleam of Aiuspaktyn
Phone is HTC P3600
Rom Udk 6.1 Lizard
Data Rom 6/29/2007
Radio 1.56.70.11
Versione Proto... 32.89.7020.20H
Camera doesn't work . All black no image both internal than external camera, and slow change of camera option menu.
No One had met this problem with camera!! my photocamera doesn'work yet.
Can Someone help me?
Seems too common of a problem. I have an 8525 that lost the camera ability when I upgraded to the factory Hermes CINGULAR 6.0 ROM. I tried coolcamera, nuthin. Tried to upload Camera 4.0_28276 and it worked! Once Tried it again 15-20 min's later, stopped working. I'd hit the camera icon, and get a white screen, and the windows logo would start to spin, then it would go back to the home screen. Messed around some more and got a certificate error.
I changed my rom yesterday to V8Beta2 by JossKoss. I love the ROM, but still no Camera. I tried CoolCamera and Camera 4.0_28276, camera shortcut icon does nothing when pressed. In the Windows folder, camera.exe does nothing, camera.exe.0409 states there is no application associated with it.
Originally Posted by YellowGTO View Post
Not sure if this will help because my cam just worked. But Program files > Device update > System > There is a thing in there called Camera Support. You could try and download that.
Click to expand...
Click to collapse
Tried to find "camera support", not on my phone. The above quote was from the thread regarding my ROM.
I will not give up. Anyone with more idea's to try?
Got it working
This morning I took my phone off the charger and removed the battery as soon as I got up. 45-50 min's later I put the battery back in, and the camera worked! Drove to work, tried it again and the camera is still working. Hopefully stay's working. I'd hate to have to remove the battery for that long any time I want to use it.
camera
nothing also by leaving the battery off . I try a lot of rom but nothing. where can i try original sw with wm5
Bought the Atrix last week and unlocked it with the help from the webshop as I'm in Belgium, no problem connecting to Mobistar wich is my provider and data connections works great. But I'm having real problems making phonecalls and recieving calls; the phone reboots or the dialer hangs and it looks like a call is going on when it's not, phone still works but flashing green in the notification area and it's impossible to hang up, need to reboot. This happens like 80% of the times I try to make a call. After a reboot it works fine to call and hang-up one or two times then it crashes again.
Also noted that my Dialer often runs twice in the Running Apps manager - is that normal??
Anyone having the same issues or know what to do, reinstall the Dialer app --> if so how? Is it a hardware or software problem??
A little more info: when I recieved the device it was in a sealed Atrix box but the phone was used and already had an active Blur account so I had to do a hard reset to be able to use it... --> was it returned 'cause of faulty dialer or radio... then resold to me... not nice if so...?
Tried to install dialer one app but it seems only to skin the original dialer...
It's a greate device and works great othervice but in the end it's still a phone... which should be able to make calls...
Help
Ive got an unlocked Atrix too and now in Germany, I have the same problem. Motorola should definitely look into this.
Here's a quick fix for it thou, (not permanent)....
1. type *#*#4636#*#* on the dialer
2. Chose Phone Information
3. Set preferred network to GSM only
Viola...its fixed
problem with this fix is that you wont be able to use your 3G network but the dialer should be working.
Thanks Nazrin (for both replies) !!
It sure did the trick, though no data access is not acceptable on a phone like this!!!
So this meens that all unlocked Atrix's in european GSM networks have the same problems? Haven't seen any others reporting this and there are quite a few in use I've noted in other forums.
Was thinking of trying to have mine replaced (which probably won't be easy and take long time...) but that won't change anything then??
We have to wait for the european version of Atrix rom I suppose??
Any others with the same problem??
No problems buddy, glad it worked..and i have to agree with you..this bug is unacceptable...it seems the phone just ***** up everytime it calls on utms (3g)...im sure there is more people with this problem...
Sent from my Supercharged MOTO ATX
I have the same problem
Hi guys, I have the same exact issue (I'm also in Belgium, on Mobistar). I'm somewhat glad to hear this is a generic issue, and not an issue with my specific phone. At least I can be fairly certain replacing it won't solve this issue then.
I made another post here before I came across this one, has a bit more info: we are seeing modem panics when using 3G + outbound call. I've also contacted Motorola support to no avail:
http://forum.xda-developers.com/showthread.php?t=1028771
You can also read there that I tried another operator, and it did not crash with that one (although 3G did disconnect).
Hopefully Motorola/Qualcomm will start to notice the bug when they release the phone globally, and release a fix.
Either that, or we all have phones from the same bad batch
This bug is really bad for users in europe....cant call on utms...
I really hope motorola takes this seriously cos if there's no fix via software updates then its moto gone for me
Guys, you are all on unlocked att atrix right? I do believe it is a simmiliar software glitch/bug/lock that you have porblems using it on non att networks as the problem with the wifi that it stops working for some of us (check the thread about it for more info). As all suggests there it is a config file problem, unfortunately i or anyone else doesnt know yet which one....
Yeah maybe..but funny thing is wifi is working without a glitch...will have to read that forum later...
Workaround options
So, since it seems we're not gonna get this fixed until there is a new radio/modem firmware available for flashing (and even then..), I've been looking for a workaround.
Found two potential applications that could do what we need: disable data completely when making an outgoing call, or switch to 2G:
- Sanity
- Superpower
I've tested the first (Sanity), and it does not work (fully). It does seem to disable data, but the bands aren't switched so our problem remains. I've contacted the developer here: http://tagliamonte.net/forum/thread-10.html. He seems to be very responsive, so given enough interest, I think he would add the functionality we require.
The second app I only came across today, and have not tried yet. It does not have a function to specifically switch bands when making an outgoing call, but it has a trigger for "Foreground application", so if we make that the dialer/contacts... Question remains if it will be able to do the switch.
Hopefully one of these will lead to a decent workaround for all of us!
Well done unknown...i will try these apps... but the real fix should be from moto...im always reading the net for anything that can solve this issue
reboots on incoming and outgoing calls
Same in Russia on Megafon network, I had to enter 4636 menu and use it as "GSM only". Even this does not fully solve problems, e.g. call forwarding does not show the new destination number while it does actually make the phone divert calls correctly.
My hope is that UK release will trigger new software version which will address this issue. ANYONE has news on this?
FIXED!
YAY! I just fixed this issue
What you need to do: flash the radio from this thread:
http://forum.xda-developers.com/showthread.php?t=1052914
You have to use RSD-lite, since sbf_flash will not work. Flash the 1.87 baseband and enjoy working HSPA (including unlocked upload speeds ^^)
Now I can finally appreciate this phone fully
Enjoy guys!
_unknown said:
YAY! I just fixed this issue
What you need to do: flash the radio from this thread:
http://forum.xda-developers.com/showthread.php?t=1052914
You have to use RSD-lite, since sbf_flash will not work. Flash the 1.87 baseband and enjoy working HSPA (including unlocked upload speeds ^^)
Now I can finally appreciate this phone fully
Enjoy guys!
Click to expand...
Click to collapse
Worked for me as well..brilliant!!!! its working here in germany.....but I wonder the telstra radio will work in my home country with frequencies of 900/2100
Motorola Atrix restart when placing a call
I just got the same exact Dialer problem now, but the flash radio file is gone* in the pointed post, and I don't know exactly how to flash the radio.
Someone can help me? I need the radio file and step by step instruction to how to flash it.
BTW my Atrix 4G works perfect for a year till this Dialer problem started past week.
I also use my phone as a full Linux computer when docked, and it works very fine.
Thanks
* The file was on megaupload, that was closed
No answer
Why I never got an answer of any post I did?
There is something wrong?
Eli
elijacob said:
I just got the same exact Dialer problem now, but the flash radio file is gone* in the pointed post, and I don't know exactly how to flash the radio.
Someone can help me? I need the radio file and step by step instruction to how to flash it.
BTW my Atrix 4G works perfect for a year till this Dialer problem started past week.
I also use my phone as a full Linux computer when docked, and it works very fine.
Thanks
* The file was on megaupload, that was closed
Click to expand...
Click to collapse
Forget about those ways
klingsurf said:
Bought the Atrix last week and unlocked it with the help from the webshop as I'm in Belgium, no problem connecting to Mobistar wich is my provider and data connections works great. But I'm having real problems making phonecalls and recieving calls; the phone reboots or the dialer hangs and it looks like a call is going on when it's not, phone still works but flashing green in the notification area and it's impossible to hang up, need to reboot. This happens like 80% of the times I try to make a call. After a reboot it works fine to call and hang-up one or two times then it crashes again.
Also noted that my Dialer often runs twice in the Running Apps manager - is that normal??
Anyone having the same issues or know what to do, reinstall the Dialer app --> if so how? Is it a hardware or software problem??
A little more info: when I recieved the device it was in a sealed Atrix box but the phone was used and already had an active Blur account so I had to do a hard reset to be able to use it... --> was it returned 'cause of faulty dialer or radio... then resold to me... not nice if so...?
Tried to install dialer one app but it seems only to skin the original dialer...
It's a greate device and works great othervice but in the end it's still a phone... which should be able to make calls...
Help
Click to expand...
Click to collapse
[Sorry for problem in speaking]
i had that problem too , im using CM13 with Marshmallow Version of android
So . the easy way is :
***** search "Default" in settings. then choose " System dialer" as Default ! just it ****
but if there is no search bar in your setting . try this patch:
Android 6 : Setting/Apps then click the setting icon on top(may be diffrent in your case) , then Click on "default ...." then choose " System dialer" as Default! :fingers-crossed:
but in some cases that it didnt work . they have to reinstall gapps .
Or in official Roms , reset will be usefull
any quastions?
Got the tab a week ago. The front facing camera was working fine, tried it again today and the color was all screwed up. Is this a hardware or software problem? The back camera still works fine. The picture attached was taken from the front camera.
I would think it is a software issue. Did you install any rom or photo software?
Nope. Havent installed any camera apps or messed with any settings.
If you have root, and you can try flashing a fresh rom.
I have exactly the same issue on my Nexus S. Back camera also works fine. I have stock 4.1.2. Never flashed anything else. Phone version is I9023XXKI1. I know it worked flawlessly for months in skype. Then it changed to this weird color mode for some calls and back without any apparent reason. Now it doesn't change anymore. It just stays this way. I tried to change many settings, nothing helps. I'm also attaching image.
This is the only post I found that seems to be the same as my problem. The hardware is different (well, they are both from Samsung) but result is the same.
Hi guys, I have the following problem with a tg01.
The Wi-Fi don`t want to turn on at all. When I try to start it, I got that loading wheel for a few seconds, then it is gone and the Wi-Fi is not turned on. Is it look like a hardware issue and can I confirm that it is a hardware failure? The phone belong to a friend of mine. At first it was running some French version of WM, dont know which one exactly. He says at this point everything was working fine. Then some "gsm guru" hold the phone for a month trying to flash it with WWE version and he got it back with WWE WM 6.1 but the Wi-FI and the GPS was not working. I took the phone trying to help. I flash it with ROM_TG01_29017_Shell_WWE - WM6.5
The OS is working nice and smooth, the GPS is back and working fine, but the Wi-Fi is still gone... so any sugestions how can I 100% confirm that it is a hardware issue?
Thanks in advance.