Help please! A situation such: I have I-mate K-jam
IPL: 2.16.0001
SPL: 2.16.0001
OS: 2.16.9.4 rus
GSM: 2.29.11
Has decided to alter the version RUU_Molski.Biz_226102_22610105_022511_G4_WWE-30MB.exe, has made CIDUnlock with Lokiwiz_02a, it was stitched after end has joined and has shown:
IPL: 2.16.0001
SPL: 2.16.0001
OS: 2.16.9.4 rus
GSM: 2.25.11 - it has changed only and filling ROM
Download an insertion from Qtek in archive Era_RUU_Wizard_AKU2.3_Custom_A2DP.rar CIDUnlock did not make, it was stitched normally did not wish to put a program from rum and at inclusion was going to make reset, phon it was loaded normally, but I have distracted also the automatic device have pressed reset when programs from rum were already put - bodies was switched off and does not join any more in general. The charge for that moment was percent 80, at connection to PC any sounds not be heard and in any way itself does not find out. Charger I connect happens nothing, light-emitting diodes do not burn. I try to come in BOOT LOADER MODE - I clamp cam+reset - anything. Has charged the accumulator on other wizard, now a charge full. Unique attributes of a life it when on charger or on USB stands, the battery pull out also it for a second includes illumination on keys and the screen, more attributes are not present. On a course has found out that the second insertion it G3 with IPL SPL and at me device G4 is fatally or how? Can eat what variants of revival?
Excuse for my English!
Sorry to hear but I think your phone is bricked. If lights illuminates without the battery when charger is plugged in, its bricked. Your only choice, in my opinion, is to get another mainboard and swap it in.
ouch
im brand new here so dont pay to much attention to me.
Isn't lokiwiz02 for the g3? I thought you needed 03 for the G4? I hope for your sake that its not bricked. good luck.
Actually, lokiwiz 0.3 just added the ability to SIM-unlock your G4. not CID, for that you still need to go the imei-check.co.uk
Related
Wow, what an awesome night this has been. Busted out my used MDA that I paid $180 for, didn't register in back of my head as I saw it boot with IPL/SPL 2.260001 even though I read that meant its a G4. Tried to downgrade it to button 1.05, ROM said wouldent work with my device, another clue that fell on dead ears as I went straight to flashing it with another program. Its totally bricked, not I need to go into bootloder and flash bricked but now a $180 paperweight. I think ill contact HTC, see if its still under warranty or if they have a repair service or maybe sell on ebay at loss. Auesomeness.
Just blame yourself by not carefully reading the stickies...
happened many times to me....
http://www.o2online.de/nw/support/downloads/software/xda/older/xdaminis/index.html
download this "update" and flash your wizard with it in bootloader mode. Should fix the problem.
PM if you need help
No...mikejj2004's Wizard should be completely bricked that can't even power on due to flashing incorrect IPL and SPL to a G4 Wizard.
Is there absolutely no way you can get the phone to bootloader mode? what I would reccomend is try pulling the battery out untill the screen goes black and then put it back in then plug the phone in and charge it till the light turns green and then hold the camera button while pressing the power button to get back to bootloader and load manufacturer rom.
Maybe I read wrong and you have already tried to get back to bootloader but if not then I would give it a try. As long as phone can make it to bootloader and has more than 50% charge, you can get it back to manufacturer's rom.
Take a look at this thread, it tells you how to force bootloader given your battery is good enough to turn the device on. CLICK HERE
Good luck my friend.
P.S. Please from now on, ALWAYS read all directions and warnings before attempting to do something you may not understand. That is how these kind of things happen and I would say it sucks to be the proud owner of a $180 paper weight.
mikes device is totally gone. happend to me last week. luckily i still had a nice amount of time left in my warranty so AT&T gave me a replacement yesterday.
yea well lets just hope that since he bought it used that he actually has a warranty...
thats how i did it.
charged the battery at in my friends wizard, put the battery in, held down the camera button and switched it on, voila rainbow screen.
Then i just ran the original O2 upgrade utility.
Not just once!
dharvey4651 said:
yea well lets just hope that since he bought it used that he actually has a warranty...
Click to expand...
Click to collapse
if he got it off ebay or something hes f**ked. no warranty on that
pkoper, you don't understand the difference between battery failure and bricking.
If a device is bricked due to flashing G3 IPL to G4 wizard, the G3 IPL cannot commuicate with G4 chip and tell it to power on, so the device is RIP whatever you are trying to do unless reprogram the G4 chip using a external JTAG connecter.
thunda_chunky said:
if he got it off ebay or something hes f**ked. no warranty on that
Click to expand...
Click to collapse
beleive it or not, they gave me a warranty exchange for an eBay bought phone.
had warranty on the phone prior, and they didn't recognize that I was 'warrantying' a differn't phone. Either they screwed up, or they don't care - I got a warranty exchange on an eBay bought phone.
Just a question..
i have read over the wiki that if it has 3 zeros "000" after 2.xx. then
it is still a G4 device..
then in your post, you have bricked your G4 device with 2.26.0001..
it is contradicting whats written in the wiki..
my fone has these:
IPL/SPL 2.26.0001
GSm 2.25.11
OS 2.26.10.2
is it a G3 or G4?
thanks..
rizortiz
That is a G4!
just a querry my intelligent friends... =)
hi..
i just bought a new fone.. t-mobile
my fone reads:
ROM version: 2.26.10.2 WWE
ROM date: 6/7/06
Radio version: 02.25.11
Protocol version: 4.1.13.12
ExtROM version: 2.26.10.105
i reseted my fone, i got:
IPL/SPL 2.26.0001
GSM 2.25.11
OS 2.26.10.2
others says 2.26.0001 is a G4, but in the wiki it says its still G3..
am confused.. is my device G3 or G4?
rizortiz
g4 for sure, cause .0001
really..
why is it that in the wiki..
'Note: Some people might be confused by the fact that it says G3s only have 2 zeros. That is in reference to the part AFTER is says "or". If you have 2.26 has you IPL and SPL then you have a G3 Wizard.'
the last line there says that if it has an SPL/IPL of 2.26. it is still a G3 device..
thanks.
the wiki states that phones with "2.xx" would be g3. A wizard with "2.xx.000x" would be g4.
Notice the lack of trailing zeros.
Always Always Always If your phone's ipl/spl ends with .000x it is G4.
I lost my post virginity for this. I hope it helped.
100% G4.
If you don't believe, just flash a IPL to it and wait for a brick being created...
Please i think i ve brick my G4 ive send a rom WM6 in french for G4 and now fone start and after freeze on information product
IPL 2.18.0001
SPL2.18.0001
OS 4.0.0.0
What can i do
I ve try to flash with another rom
and i will not work
TOZE said:
Please i think i ve brick my G4 ive send a rom WM6 in french for G4 and now fone start and after freeze on information product
IPL 2.18.0001
SPL2.18.0001
OS 4.0.0.0
What can i do
I ve try to flash with another rom
and i will not work
Click to expand...
Click to collapse
As long as you can get into the bootloader screen theres a good chance it can be saved... Press the Camera button then turn it on, there should be a rainbow screen, if you get that you're golden. Get a rom called 'Wizard Love' or your original operator rom and flash it, it'll work.
Maybe this thread already been posted, please help me!!!
I took Qtek S200 used one, and the old host said he had problem with upgrade. I can't upgrade myself, and give it to master, master can't solve the problem, but when I came back and put it to upgrade with "220734 WWE ship" version it did well and I had working device for week, then it freesed once more, since I can do nothing. initially it has IPL 2.09.001 and SPL 2.20.0001, I did the program posted here - IPL upgrade and now I have IPL and SPL 2.20.0001. Phone enters bootloader normally, upgrade only with "220734", others doesn't go. When I switch it in normal mode it freeses as white screen on "Windoes mobile" screen, sometimes it goes further but final picture one - freesing.
Wait for Your advices.
P.S. In my city no official cervice...
Try a different ROM...
Put the device in bootloader,disable connect through USB in active sync, and run the RUU from a different ROM...
Hi guys I need some help. I have a Cingular HTC 8125, I was trying to upgrade the rom on it to a new WM6 and here is what happened.
I have been researching the topic for about 3 weeks.
Its a G4 Device being upgraded with VISTA w/ Moded drivers for Ative SYNC
IPL 2.25.0001
SPL 2.25.0001
I used the shell tool to install one of the roms waited about 2 hrs and finally noticed that the window was NOT RESPONDING so I had to shut down and start over. The phone got to the second screen but froze there now showing
IPL 2.25.0001
SPL 2.25.0001
GSM 02.25.11
OS 10.1.0.811
On the Cingualr Background, I can still enter the Bootloader screen but nothing else?
Nothing else happens I cant connect the phone to the PC to do anything else.
Is it bricked or not is my question and what can I do to flash OEM rom or something that will work.
I tried OEM Cingular rom but I get ERROR 260 No connection to the phone?
Any help will be greatly appreciated!
Bricked phone
You should had firstly either hardspl or soft spl the phone b4 trying to load any rom
It's not bricked as long as you can see the RGB screen (Colors red, green and blue)showing the same IPL/SPL such as yours; IPL: 2.25.0001 and SPL: 2.25.0001. AND PLEASE BE CAREFUL WITH YOUR DEVICE CAUSE ITS G4 MEANING YOU CAN NOT JUST INTALL/FLASH ROM. Make sure that the Rom you flash not contain G3 IPL and SPL which is 2.xx.001. If so, then you will bricked your device.
Desiji is right, you should install rom with softSPL or hardSPL.
Try to flash the Official Cingular Rom or Wizard Love Rom. If success, then you can install other Rom using what desiji said. Just make sure that its a G4 safe rom. And another thing, try to charge battery using wallcharger not in the device. U need enough battery to perform rom flashing.
Hope this help revive your Wizard.
esdee007
WOW !
grrrrr8,you are a quick learner
CateraMV6
Yeah ! I certainly agree with esdee007 and desiji
Thanks
Hey guys thanks, thats what I thought but I think my main problem is the VISTA I need to get a hold of XP and try all that because the Vista is having issues with connecting to the phone at the moment, I can not get it to show it as a device. It does make a beep noise when you connect/disconnect it so its doing something but Vista is just too much of a pain in the rear to deal with.
Its a good news that its not bicked so all hope is not lost.
What is the opinion on Tmobile WING!? any reviews should I get that phone instead?
BTW where do I find these G4 Safe ROMS? and how do I tell if they have the IPL/SPL in them? Do I need to hack them to tell?
And is Soft or Hard recommended?
YUP ! sure vista is still not compatible for flashing,WinXP is highly recommended and trouble free.
All official stock roms are safe to flash both the devices G3 or G4,secondly,all the latest custom build wm6 or wm6.1 are safe for both the devices,as they don't include any IPL/SPL in them.
If you plan to flash many roms,than 'HardSPL' is recommended,coz its done only once and the device remains semi_Cid unlock untill you personally remove HardSPL,but with SoftSPL,its done everytime you want to flash a new rom,choice is all yours,how you want to go about it.
hi all, hope someone can help, been reading threads for days and this is about my fifth xda so i'm no newb.
it's an i-mate jamin i got for my father, ipl/spl 2.13.0001 (G4) bought second hand from ebay, seems to work fine running wm5 os 2.13 but won't send text messages, didn't think much of it since i was planning to upgrade to wm6.1, unfortunately NO KNOWN METHOD WORKS.
Here's what i've tried:
Two different windows xp computers, two different cables, re-install activesync, hard reset, multiple connection retries.
PDAViet temp step 1 from OS and Bootload, most common error is [264], tried NVID wm5, tried official IPL 2.20.0001 upgrade and official i-mate ROM, tried jump/soft/hard SPL, all go to white bootload screen but no further, sometimes the green LED will flash as a radio signal on this white screen but usually nothing.
It seems very much to me like the bootloader is not responding, can someone please tell me when you put the phone in the bootloader and plug the usb cable in, after it has said USB, if you then unplug the cable should the USB text dissapear? because on mine it remains..
when running hardspl.bat the only error on the script is;
cerun: program could not execute (0), after trying to run jumpspl, altho it DOES go into the white screen and just sit there, yes i've tried pressing the camera button.
I'm fresh out of ideas here! help please!
when i run Prophet_G4_IPL_v2.20.0001.exe after a hard reset (sticks on bootloader and give [264]) but before that it says upgrade from 1.2.0.0 to 2.20.
That first number doesn't seem right? is it possible the previous owner flashed a G4 ipl onto a G3 device? and how would I tell?
Im using O2 Zinc.
When I up rom, I thought it's ok. But when the process bar completed at 100%, the install Wizard stopped. I had waiting for .... more than 1 hour but..... Its still "doin' nothing".
Can any one help me to repair it???
its so "dead"!
You can usually recover from a bad flash by doing a hard reset. At the very least, you should be able to get it back to bootloader mode.
If hard reset works, great. Just remember to charge your battery fully before flashing again. If hard reset at least gets you to the bootloader screen (tricolor, shows IPL/SPL, and when USB is attached, shows that), turn the phone OFF, charge the battery fully (preferably on an AC charger), and then try to flash it.
If none of these work, I have to ask you some potentially embarrassing questions, like: Did you use HardSPL or SoftSPL? Are you abso-friggin-lutely sure you have a G4? What ROM are you trying to load (and does it have IPL/SPL included)? What condition is the battery in? Have you ever had problems with the USB connector? Did you try flashing via bluetooth, Wifi, or some other method that has been strongly recommended against?
One last check: Wizards are also known as: Also known as Qtek 9100 / I-mate K-JAM / MDA Vario / O2 XDA Mini S / SPV M3000 / Cingular 8125 / T-Mobile MDA / Dopod 838 / VPA compact II
(...notice there's no Zinc in this list? Making you nervous? It would me!)
Open your battery compartment, and tell us what the model number is...it'll be under the battery, right above the FCC ID number and the SKU symbol. For example, mine is WIZA100.