heya, I noticed a whole lot of useless programs that I dont use from the ext. rom that ships with the cingular 8525..
I know from my previous phones I'm able to hardboot and when that message comes up.. something like "installing custom components in 3 seconds.." one would do a softreset and that installation shouldnt come up again right?
well I was wondering what cab files were needed so I can install only the needed ones.. ie mms/wifi setup files, etc.
Anyone know? Thanks!
Dunno if you ever got your answer, but I can guarantee you that when I get mine tomorrow, it's one of the first things on my list of things to do. I know that 90% of the crap that Cingular puts on there I have no need for..
If someone figures this out let us all know. i too wanna try to play around with some other ROM's to see which works best with my configuration.
I upgraded from a TyTN to the Cingular ROM
I did the reboot thing so that I did not get the "value-add" stuff from Cingular after I let it do its normal thing. What I found out was that if I did not do the reboot thing, the "value-add" stuff from Cingular changed the keyboard mapping so that I could not figure out what keys the special characters were on. When I hard setup again, I rebooted and the keyboard works great. The only thing is, you have to put in all the information in the connection menu.
There's 2 times that the 3 sec screen pops up.
Does the keymapping work correctly if you let the first one run and do the reset before the second one?
Well I just tried my suggestion above and everything works great.
I let the first install run, and then just after the second 3 sec. pop-up window, I reset.
Then I used Total Commander to install everything but GetGood, ExpressMail, MobileTV, and TelNav.
I ended up with more user memory.
berdinkerdickle said:
Well I just tried my suggestion above and everything works great.
I let the first install run, and then just after the second 3 sec. pop-up window, I reset.
Then I used Total Commander to install everything but GetGood, ExpressMail, MobileTV, and TelNav.
I ended up with more user memory.
Click to expand...
Click to collapse
Do you have the before and after memory numbers by chance I would like to see them if you do?
the keyboard setup is done in the first 3 second customization.. those cabs are in the windows folder.. the 2nd customization is the cingular stuff from the ext rom
aadadams said:
Do you have the before and after memory numbers by chance I would like to see them if you do?
Click to expand...
Click to collapse
Sorry, I didn't see the exact before and after.
It looked like I gained a little over 1mb.
What exact cabs in the \Windows\ folder are needed to install in order to fix the keyboard? I just hard reset my 8525 and the "-" and "_" show up as " and +
Exact file names please
MilanoRex said:
What exact cabs in the \Windows\ folder are needed to install in order to fix the keyboard? I just hard reset my 8525 and the "-" and "_" show up as " and +
Exact file names please
Click to expand...
Click to collapse
Its a registry setting, see the last entry here.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry
saq said:
Its a registry setting, see the last entry here.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry
Click to expand...
Click to collapse
That worked, thanks
berdinkerdickle said:
Well I just tried my suggestion above and everything works great.
I let the first install run, and then just after the second 3 sec. pop-up window, I reset.
Then I used Total Commander to install everything but GetGood, ExpressMail, MobileTV, and TelNav.
I ended up with more user memory.
Click to expand...
Click to collapse
What was the "other stuff" you had to self install? I am contemplating this procedure but am not sure if it gives me enough storage space to justify a hard reset and reinstall of everything?
Related
i couldnt find this covered in the wiki, or maybe i misread or overlooked.. After you unlock and unhide the ext rom on 1.04 can you write to it and not corrupt it? coming from the wizard this was a very very bad thing to do, but seems like from what i have read that i can actually write to this one, just need confirmation?
and yes i already know how edit the txt file, etc...
not a stupid question shogunmark. neither have i read about that in the wiki but there are threads talking about that.
i myself have unlocked and mounted the ext rom using fit4cat and have removed all files in it after backing them up to the storage card. i now have number of apps installed on it, enjoying the additional 10M space, and it's working fine without any issues. i've been using it like that almost for a month now but nothing is corrupted.
in addition, i was doing the same with my universal dopod 900 and have installed number of apps and skin/icon files to the ext rom.
ok cool, on the wizard that would corrupt your ext rom... mainly cause you couldnt unlock it but could write to it... aside from installing apps, what about adding cabs to install with the initial 3second customization..
like for example..
lets say i unlock/unhide the ext rom
i add cab file 123.cab
then edit the txt file with CAB: \Extended_ROM\123.cab
then lock the ext rom back up.. now when i hard reset would it install the cab file???
if that works on the hermes then i am in love.. it was a pain on the wizard, had to create a new image then flash it to the phone, etc.. PAIN IN THE A$$
shogunmark said:
ok cool, on the wizard that would corrupt your ext rom... mainly cause you couldnt unlock it but could write to it... aside from installing apps, what about adding cabs to install with the initial 3second customization..
like for example..
lets say i unlock/unhide the ext rom
i add cab file 123.cab
then edit the txt file with CAB: \Extended_ROM\123.cab
then lock the ext rom back up.. now when i hard reset would it install the cab file???
if that works on the hermes then i am in love.. it was a pain on the wizard, had to create a new image then flash it to the phone, etc.. PAIN IN THE A$$
Click to expand...
Click to collapse
unfortunately, that doesn't seem to work. what i heard is that the cab file to run with autorun and config.txt needs the htc signature. if you can get it from htc you may... still pain in the b$$
well what you may actually need is a cab to disable the security to allow non-certified apps to install.. i know on the other ext roms thats a must or else the other cabs wont install.. was usually the first thing i installed on my cooked wizard roms.. i dunno, i havent dove into this yet, and dont know if i will get time tonight
shogunmark said:
well what you may actually need is a cab to disable the security to allow non-certified apps to install.. i know on the other ext roms thats a must or else the other cabs wont install.. was usually the first thing i installed on my cooked wizard roms.. i dunno, i havent dove into this yet, and dont know if i will get time tonight
Click to expand...
Click to collapse
then, how would you get around with running that security patch cab with no signature to start with? or do you already have that sorted out somehow?
harryk1372 said:
then, how would you get around with running that security patch cab with no signature to start with? or do you already have that sorted out somehow?
Click to expand...
Click to collapse
the one we had for the wizard was a signed disable security cab....maybe i will try it now.. who needs sleep, lol
i can confirm that the signed cab we used on the wizard to disable security does install and work on the hermes...
shogunmark said:
i can confirm that the signed cab we used on the wizard to disable security does install and work on the hermes...
Click to expand...
Click to collapse
wow, that sounds great... post the results when you're done... but sleep tight before that.
harryk1372 said:
wow, that sounds great... post the results when you're done... but sleep tight before that.
Click to expand...
Click to collapse
sure thing, i just copied everything over.. will hard reset on my way to bed and post my results when i wake up...
so here is what i have determined.. my test so far has failed... however i can say that unlocking the ext rom, making changes on the config.txt, then locking it and doing hard reset does work (which makes me very excited!) however for some reason the signed remove security cab doesnt seem to want to install without user input.. hmmmm there has to be a way..
shogunmark: I looked into this some time ago and couldn't find a solution. Hermes only allows to install signed cabs, and the signed cabs used on wizard and universal to disable security do not work on the hermes. If you look at it more deeply and find a solution let me know
pof said:
shogunmark: I looked into this some time ago and couldn't find a solution. Hermes only allows to install signed cabs, and the signed cabs used on wizard and universal to disable security do not work on the hermes. If you look at it more deeply and find a solution let me know
Click to expand...
Click to collapse
thanks for the insight... lets start with this question.. what is different in signed security cabs between the wizard and the hermes.. what makes them different that they wouldnt run... they should in theory be ok when signed, something has to make them different
it should be either one of this (or both):
1. the certificate used to sign the wizard / universal disable-security cab is not installed on hermes
2. the method used to dissable security on hermes is different from wizard / universal devices
Should not be very difficult to figure out. I have no time now, but can probably have a look at it later this week.
shogunmark said:
ok cool, on the wizard that would corrupt your ext rom... mainly cause you couldnt unlock it but could write to it... aside from installing apps, what about adding cabs to install with the initial 3second customization..
like for example..
lets say i unlock/unhide the ext rom
i add cab file 123.cab
then edit the txt file with CAB: \Extended_ROM\123.cab
then lock the ext rom back up.. now when i hard reset would it install the cab file???
if that works on the hermes then i am in love.. it was a pain on the wizard, had to create a new image then flash it to the phone, etc.. PAIN IN THE A$$
Click to expand...
Click to collapse
the wizard extended rom can be unlocked now.
pof said:
it should be either one of this (or both):
1. the certificate used to sign the wizard / universal disable-security cab is not installed on hermes
2. the method used to dissable security on hermes is different from wizard / universal devices
Should not be very difficult to figure out. I have no time now, but can probably have a look at it later this week.
Click to expand...
Click to collapse
#1 sounds more feasable than #2 and here is my reasoning behind it..
#2 when i installed the disable security cab from the wizard i was able to run cabs and programs that werent signed without notification, so the process sounds similiar, i just havent broken the cab yet and looked at it to compare processes and reg edits used when disabling, i will try to break it down tonight
faria said:
the wizard extended rom can be unlocked now.
Click to expand...
Click to collapse
[email protected] you faria man that would have made things alot easier when i had the wizard... it was a pain to reflash the ext rom all the time to make sure it would work
shogunmark said:
[email protected] you faria man that would have made things alot easier when i had the wizard... it was a pain to reflash the ext rom all the time to make sure it would work
Click to expand...
Click to collapse
ehehe.
have you tried the n ew enable rapi from machinegod?
i think it has the anser to your problem.
ok right now i'm running the love rom on my g4 wizard. how do i reflash my original cingular rom? i know, it sounds like a nub question but here is the problem. it will flash then hang at 80% and the progress bar will turn red. it will then pick up again and continue to 95% then turn red, fail and say error 326 invalid command. i downloaded the updater directly from htc.
any ideas guys?
Yeah it doesnt work....Your now stuck with the Wizard Love Rom or you can upgrade to another rom but you cant go back to the original Cingular Rom.
internetadam4657 said:
ok right now i'm running the love rom on my g4 wizard. how do i reflash my original cingular rom? i know, it sounds like a nub question but here is the problem. it will flash then hang at 80% and the progress bar will turn red. it will then pick up again and continue to 95% then turn red, fail and say error 326 invalid command. i downloaded the updater directly from htc.
any ideas guys?
Click to expand...
Click to collapse
internetadam4657 said:
ok right now i'm running the love rom on my g4 wizard. how do i reflash my original cingular rom? i know, it sounds like a nub question but here is the problem. it will flash then hang at 80% and the progress bar will turn red. it will then pick up again and continue to 95% then turn red, fail and say error 326 invalid command. i downloaded the updater directly from htc.
any ideas guys?
Click to expand...
Click to collapse
That ROM is for a G3 Wizard, Check your PM's
ok i reflashed with your method and i'm back to my cingular rom. thanks a lot!
(big reason to go back was it was the only rom that my school's wifi app would work with, plus the love rom in combo with orwells wm6 wasn't cool. that splash was ugly IMO)
internetadam4657 said:
ok i reflashed with your method and i'm back to my cingular rom. thanks a lot!
(big reason to go back was it was the only rom that my school's wifi app would work with, plus the love rom in combo with orwells wm6 wasn't cool. that splash was ugly IMO)
Click to expand...
Click to collapse
If you were talkin' to me...glad I could help...one question though...
did your ext Rom install on its own?
no, i still had a blank ext rom as i had to setup all my internet settings, etc again. how can i fix that one?
internetadam4657 said:
no, i still had a blank ext rom as i had to setup all my internet settings, etc again. how can i fix that one?
Click to expand...
Click to collapse
All you have to do is download and install the Ext Rom cabs manually. This may still be available on the ftp. If not PM me.
It worked for me
Thanks a lot ercave1, the ROM flashed flawlessly, however the EXT ROM didn´t came up by itself. The features I´m missing are as follows:
1.- USB switch to select activesync mode to serial or RNDIS is missing, regardless this USB sync to PC (Activesync 4.5) is alive and working well.
2.- ClearVue pdf is missing, not a big loss and I really don´t care since there´s another alternatives to read and diisplay pdf documents.
3.- GetGood and in general all connection settings! I don´t give a s**t!!
4.- MIDlet Manager, big loss... I´m going to keep trying to download Risidoro_Intent_MIDlet_ Manager_V11 whenever the ftp be up and running again. So no worries.
5.- Voice Speed Dialing Settings icon in both the Program ans Setting screens are missing, however the software is running when I press the known VSD button.
6.- Cingular carrierlogo! I don´t care I have my own logo.
And I guess that´s it !
Regardless the comments above, I´d like to learn how to "extract" the correspondent EXT ROM cab files, if you guys have and advice on it would be great.
Thanks again ercave1 for the big help
internetadam4657 said:
no, i still had a blank ext rom as i had to setup all my internet settings, etc again. how can i fix that one?
Click to expand...
Click to collapse
luiggi said:
Thanks a lot ercave1, the ROM flashed flawlessly, however the EXT ROM didn´t came up by itself. The features I´m missing are as follows:
1.- USB switch to select activesync mode to serial or RNDIS is missing, regardless this USB sync to PC (Activesync 4.5) is alive and working well.
2.- ClearVue pdf is missing, not a big loss and I really don´t care since there´s another alternatives to read and diisplay pdf documents.
3.- GetGood and in general all connection settings! I don´t give a s**t!!
4.- MIDlet Manager, big loss... I´m going to keep trying to download Risidoro_Intent_MIDlet_ Manager_V11 whenever the ftp be up and running again. So no worries.
5.- Voice Speed Dialing Settings icon in both the Program ans Setting screens are missing, however the software is running when I press the known VSD button.
6.- Cingular carrierlogo! I don´t care I have my own logo.
And I guess that´s it !
Regardless the comments above, I´d like to learn how to "extract" the correspondent EXT ROM cab files, if you guys have and advice on it would be great.
Thanks again ercave1 for the big help
Click to expand...
Click to collapse
Yes, this is because the Ext Rom was wiped out by the G3 Rom having been flashed on your G4 devices. I don't remember reading about a fix for this, but you may want to search through the forum. The only solution I'm aware of is to install the Ext Rom manually.
I'm glad you guys got the device running again.
Regards,
ercave1
luiggi said:
Regardless the comments above, I´d like to learn how to "extract" the correspondent EXT ROM cab files, if you guys have and advice on it would be great.
Click to expand...
Click to collapse
What do you mean with 'extract'?
1-From the RUU exe file?
2-From nk.nba?
3-Phone disk dump?
4-WinCE disk reading?
Reflashing ExtROM CID Locked
Who knows Russian go to http://4pda.ru/forum/index.php?showtopic=32996 & read my post
And the one who does not know it?
thanks to: Murchelago
literal from the Russian to English
it is the first step. if someone can polish it (I do not speak English good).....
_________________________________________________________________________________________
Already many know that mun built Shell Of tool, which was capable of pouring axis into Wizard G4 with [lochennym] [Sidom], but to the enormous regret it does not know how to pour with [ekstrom].
Recently it decided to be played a little with the program of nb2nbf and to verify, is it possible by nevertheless any means to renew also Extended Of rom to CID-Locked apparatuses. And which there was my happiness, when I revealed after [pereproshivki] that he renewed.
It decided by the same method to try to flood Splash Of screen and HTC Of logo - everything proved to be very simply.
In view of the small quantity of information on the forum on [devaysu] Of wizard G4, it decided to build brief instruction on its [pereproshivke].
1. We stitch through apparatus by pure piercing - Wizard_Love_2.26.10.2_WWE_Novii+CF2.
http://rapidshare.com/files/8651097/Wizard...E_Novii_CF2.rar
2. By the program of typho5 we unpack nbf the file of piercing, which we desire to pour into the beast.
First we fill up into the folder with the program of nbf, and then start with the parameter of typho5.exe - x nk.nbf. After procedure we obtain several files, in number of which is contained OS itself, Extended Of rom, and also as a rule Splash Of screen and HTC Of logo.
([ZY]. For convenience in the use of program made [batnik]. Simply you will place nbf into the folder and will neglect typho.bat)
3. Now we gather our nbf file, each at will can include any desired components in it, naturally, except axis itself.
4. We go in very [progu] of nb2nbf and we make the following tuning:
- We establish Model ID: WIZARD
Language: it is empty
OEM: it is empty
Operator of version: it is empty
CID: it is empty ([ochen]_[vazhno]); remove the numbers, which are contained inside the field
- We establish [galochku] opposite “File of # 1”, we click on the button of survey (button with three points), we find the file Of extended Of rom' and (in the folder of typho5, the exemplary name of 9b000000-Extension.nb)
- In the field “Of start Of address” we enter 9b00000
- In the field “Of image Of name” we enter Extension Of rom (not Extended Of rom, you be attentive!!!)
- In the point “Of file of # 2” we find Splash Of screen, in the field of address we enter 92000000, in the field “of image of name” we write Splash Of screen.
- In the point “Of file of # 3” we find HTC Of logo, in the field of address we write 9d000000, in the field “of image of name” we write WITH HTC Of logo.
- We press button “Translate”
- Extended ROM is ready, it is possible to stitch through.
Unnecessary for you files it is possible simply not to include, but to insert, for example, only one by [ekstrom].
5. We place the obtained file of nbf into the folder [proshivalshchikom] and start. Procedure as with the usual piercing, lasts in all the pair of minutes.
6. We pour the axis Of shell Of tool' ohm from mun' of a.
Finale - valuable piercing
Don´t know
mestrini said:
What do you mean with 'extract'?
1-From the RUU exe file?
2-From nk.nba?
3-Phone disk dump?
4-WinCE disk reading?
Click to expand...
Click to collapse
I really don´t know from where and how mestrini, that´s the reason why I quoted the word extract and included the word learn
luiggi said:
I really don´t know from where and how mestrini, that´s the reason why I quoted the word extract and included the word learn
Click to expand...
Click to collapse
I enumerated the options since each have its own reason
1- Use Winrar to open RUU.exe and use typhoonnbfdecode.pl to extract the 10MB file (0xA00000 bytes) of the extended rom from nk.nbf
2- oops, same as 1 (and its nk.nbf- not nk.nba). hehe, my mistake
3- use pdocread.exe to read BDTL1 - or TRUEFFS_DOC1 (use my Wizard Service Tool as it can be done with a few clicks )
4- Unhide extended_rom and use Active Sync to copy the files to PC (or, once again use my tool to do the same )
cheers
Sounds great to me!
mestrini said:
I enumerated the options since each have its own reason
1- Use Winrar to open RUU.exe and use typhoonnbfdecode.pl to extract the 10MB file (0xA00000 bytes) of the extended rom from nk.nbf
2- oops, same as 1 (and its nk.nbf- not nk.nba). hehe, my mistake
3- use pdocread.exe to read BDTL1 - or TRUEFFS_DOC1 (use my Wizard Service Tool as it can be done with a few clicks )
4- Unhide extended_rom and use Active Sync to copy the files to PC (or, once again use my tool to do the same )
cheers
Click to expand...
Click to collapse
Thanks a lot mestrini, I appreciate your input and I´ll give it a try right away!
I found that my new x01ht include the video button calling, however, when I click it, It's show the keybad in the screen but does not have the function video calling. And also in the top, I could not see the 3G notification, but it only shows the U notification
Is there any thing wrong with my phone?
Help
war123 said:
I found that my new x01ht include the video button calling, however, when I click it, It's show the keybad in the screen but does not have the function video calling. And also in the top, I could not see the 3G notification, but it only shows the U notification
Is there any thing wrong with my phone?
Help
Click to expand...
Click to collapse
Did you let it run the preconfiguration? I think those features are added after the phone boots for the first time after a hard reset. (When you finish the stupid WM5 configuration wizard, the phone should come up with a message like "Configuring, Wait 3 seconds". If you pressed the reset button before this preconfigure script runs, you would be missing certain features such as the "3G" icon.
khammo01 said:
Did you let it run the preconfiguration? I think those features are added after the phone boots for the first time after a hard reset. (When you finish the stupid WM5 configuration wizard, the phone should come up with a message like "Configuring, Wait 3 seconds". If you pressed the reset button before this preconfigure script runs, you would be missing certain features such as the "3G" icon.
Click to expand...
Click to collapse
Thank you very much for your information.
I also thought about that but currently I don't know how to unhinde/unlock then \Extended_Rom folder. I don't want my x01ht run Extent Rom installation due to my x01ht is newest and can not sim unlocked.
If someone have the cabs file in x01ht extended_rom folder, could please send?
Thank you
I install cabs file from extended rom and it works
See attached x01ht extrom (except update_h182.exe).
i also have this problem actually with my X01HT. when i press the video calling button it just shows the dial pad. i have tried hard reset before and always left it alone to configure but still i have no luck in having the video calling function. can anyone help me out. and i dont have a 3G icon just the U icon.
marktang said:
i also have this problem actually with my X01HT. when i press the video calling button it just shows the dial pad. i have tried hard reset before and always left it alone to configure but still i have no luck in having the video calling function. can anyone help me out. and i dont have a 3G icon just the U icon.
Click to expand...
Click to collapse
I only install the x01ht extend rom cab file and It's work. I think you can install again the cab files that sent by pof
how would u install it? sorry im new to this WM phone thing. can u give me some instructions on what to do? cuz i see alot of files in the zip file. do i install all of them or what? sorry for being a n00b ive never used a WM phone before.
marktang said:
how would u install it? sorry im new to this WM phone thing. can u give me some instructions on what to do? cuz i see alot of files in the zip file. do i install all of them or what? sorry for being a n00b ive never used a WM phone before.
Click to expand...
Click to collapse
You download the x01ht extrom that pof sent.
Extract it and copy the cab files to your phone, run the cab files in order like Config.txt file.
oh alrite will try that...thnx alot
Hey, could someone please send me a link and explain to me how to install the TouchFLo on my MOGUL? It would be greatly appreciated. Thanks
You need ftouchflo(have it atached) and the config for it(attached)
then for the cube you get it here
kidnamedAlbert said:
You need ftouchflo(have it atached) and the config for it(attached)
then for the cube you get it here
Click to expand...
Click to collapse
Thanks a lot! What extra does the cube add? Thanks
kidnamedAlbert said:
You need ftouchflo(have it atached) and the config for it(attached)
then for the cube you get it here
Click to expand...
Click to collapse
Oh...sorry 1 more thing, once you download them onto your mogul what do you have to do to get them to work because I have tried something similar before and the files are on my MOGUL but nothing changed in apearance? Thanks again
Tutorial:
1. place ftouchflo.cab and ftouchflo_config.cab to device.
2. run the two files to install them.
3. download slither's cube and et the folder and put it into the "Aplication Data" folder
4. folow the steps above then watch this video:
kidnamedAlbert said:
Tutorial:
1. place ftouchflo.cab and ftouchflo_config.cab to device.
2. run the two files to install them.
3. download slither's cube and et the folder and put it into the "Aplication Data" folder
4. folow the steps above then watch this video:
Click to expand...
Click to collapse
thanks for the help
no problem
on that video it shows everything being saved to the memory card. How do you do that? because it always just automatically saves all my programs to the main memory? In that video, what is it even doing? Everything is going so fast I can hardly tell what is going on. Thanks
I just tried everything you said and followed that video and it doesn't seem to work. Everything still looks the exact same. If I go from the bottom to the top of the screen with my finger or stylus the program comes up but only after an error comes up that say ERROR RADING FILE and then it says an error message cannot be displayed because an optional resource assembly containing it cannot be found. I click OK and the program opens but then when i try to start assigning things it wont let me save because the same error come sup. I transferred all three using activesync and extracted the files CUBE(SCLP) download and then disconnected, went to my MOGUL and installed everything and then followed the steps on that video. The today screen never changed its appearance. I tried a restart and everything. Does anybody have any ideas???????? THANKS
does anyone have anymore info? Thanks
dcshoeco024 said:
I just tried everything you said and followed that video and it doesn't seem to work. Everything still looks the exact same. If I go from the bottom to the top of the screen with my finger or stylus the program comes up but only after an error comes up that say ERROR RADING FILE and then it says an error message cannot be displayed because an optional resource assembly containing it cannot be found. I click OK and the program opens but then when i try to start assigning things it wont let me save because the same error come sup. I transferred all three using activesync and extracted the files CUBE(SCLP) download and then disconnected, went to my MOGUL and installed everything and then followed the steps on that video. The today screen never changed its appearance. I tried a restart and everything. Does anybody have any ideas???????? THANKS
Click to expand...
Click to collapse
did you put the cube files in application data? thats they only way itll work
yea i put them there
this may sound stupid but did you enable touchflo?
what do u mean enable? Like, i downloaded it and it said that it was running.......
I really like Poorlyduck Vista cube
For me a stop having probleme with the WM 6.1 and cube when installing vista-cube .cab that also contain touch flo. I run and older version tha the one ''Vista suite'' I tried hard to make this in OEM package to include in option in DCD kitchen taht i customized a bit but for now i run it from cab version. ...
ok so i followed the instructions and set it up just like the vid, went back to the today screen and no different home screen. I went to choose touch flo, and it pops up as already running. Can someone help me please
Hey guys,
I have a HD2 with the following stats:
WM: 6.5
Manilla: 2.5.19211619.0
ROM: 1.66.405.2
Radio: 2.06.51.07
My phone works perfectly. Out of nowhere, without having installed any new apps, without a soft reset, nothing at all.
When I click on any quicklink, or any app under the start menu, I get the following error:
"The file ?????? cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found. If the problem persists try reinstalling or restorig the file"
??????? = the app or program I am trying to run.
This stops sense from loading. Only WM6.5 will run - without HTC sense.
I get this error for no reason. I have not installed any new software, I have not done a soft reset, nothing. Was using the phone all day and it was perfect. Then bang, I got this.
It has happened before and a hardware reset fixed it.
Does anyone know what on earth is causing it? I have SKcert and Cert2015 installed as I am using some custom icons. Do you think this might be causing it?
I do not want to have to do a hard reset every could of weeks.
This is a joke. Any help is greatly appreciated. Thanks.
hgalanos said:
Hey guys,
I have a HD2 with the following stats:
WM: 6.5
Manilla: 2.5.19211619.0
ROM: 1.66.405.2
Radio: 2.06.51.07
My phone works perfectly. Out of nowhere, without having installed any new apps, without a soft reset, nothing at all.
When I click on any quicklink, or any app under the start menu, I get the following error:
"The file ?????? cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found. If the problem persists try reinstalling or restorig the file"
??????? = the app or program I am trying to run.
This stops sense from loading. Only WM6.5 will run - without HTC sense.
I get this error for no reason. I have not installed any new software, I have not done a soft reset, nothing. Was using the phone all day and it was perfect. Then bang, I got this.
It has happened before and a hardware reset fixed it.
Does anyone know what on earth is causing it? I have SKcert and Cert2015 installed as I am using some custom icons. Do you think this might be causing it?
I do not want to have to do a hard reset every could of weeks.
This is a joke. Any help is greatly appreciated. Thanks.
Click to expand...
Click to collapse
Could be something to do with your SD card....
Have you got a link to something installed on your internal memory you can test...
I had somekind of sense failure once when I took the sd card while the phone was on and no matter what I tried I couldnt get it running....
I might be way off but Its all I can think of Im afraid.....
Re-install framework 3.5...
Had the same issue. first on a kaiser, and recently on my hd2....... what i did was reinstall the .net framework, ie first un install, then re install, and soft reset..... workd perfect.
i see this is an old post, but might come in handy any way.
acerulzall said:
Had the same issue. first on a kaiser, and recently on my hd2....... what i did was reinstall the .net framework, ie first un install, then re install, and soft reset..... workd perfect.
i see this is an old post, but might come in handy any way.
Click to expand...
Click to collapse
I have the same problem. can not reinstall anything - "not signed" any other solutions??
Regarding sdcard - it do the same with non stock programs, which are running on internal storage, when there is no SD card inside.
It happened after unsuccessful run of android from SD card
any solutions??
uta77 said:
I have the same problem. can not reinstall anything - "not signed" any other solutions??
Regarding sdcard - it do the same with non stock programs, which are running on internal storage, when there is no SD card inside.
It happened after unsuccessful run of android from SD card
any solutions??
Click to expand...
Click to collapse
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
1) Download following file: http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
From archive we need only SDA_ApplicationUnlock.exe
It allows Registry to be edited from PC.
Run it with working Activesync connection
2) Download Mobile Registry Editor: http://www.zipsoft.ru/catalog/mobile_registry_editor-v1_11.html
Also run with working Activesync connection
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
FYI, here are some other useful software packages that relax the security.
http://forum.xda-developers.com/showthread.php?t=285344
http://www.internet-tools.co.uk/blog...tegory/mobile/
http://www.internet-tools.co.uk/blog...sda_unlock.zip
http://sedacka.saman-cz.com/ppc/inde...unlocking.html
http://forum.xda-developers.com/showthread.php?t=338433 --- the first file in this article.
4) Restart
P.S. Special THANKS to JZ SmartMort
uta77 said:
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
4) Restart
P.S. Special THANKS to JZ SmartMort
Click to expand...
Click to collapse
Could you please explain to me what each of these policies values do, or maybe point me to the thread where I could find out?
I am able to install apps ok, but every time I install a cab, it gives me the
"This application is not from a certified/trusted source, yada yada yada"
message, and I have to choose 'yes' to confirm it and go ahead with the install, not a huge deal but it'd be nice to get around it if some of these will do it.
And when I reboot, especially from Android to WM, alot of the time I get an error from gAlarmReload.exe , even though it doesn't affect gAlarm at all, the alarms still work fine. I just wanna make the s/w security as lax as possible on my phone.
I guess I'm already app unlocked, because I can make registry changes no problem. I have installed sdkcerts and netcf3.5, and have done the reg change to ensure the phone is using 3.5 and not 2.whatever_it_is, among many other reg changes.
But I don't like to go changing reg values if I don't understand what they do, because I'm one of those set-everything-up-manually types, I don't like the backup prog's and I've done a bunch of tweaks already so a HR would kill me...
Thanks for reading my unneccessarily long post, I have Asperger's so I tend to overexplain everything to death, but I guess at least I'm thorough
Thanks, worked perfect on my wife's HD2, as she needs to run stock rom 3.14.
This saved me heaps of figuring out how to do this.
Once again,thanks to all those who try and help on this forum.
Where would be all be without such great contributions !
Thank you.
uta77 said:
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
1) Download following file: http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
From archive we need only SDA_ApplicationUnlock.exe
It allows Registry to be edited from PC.
Run it with working Activesync connection
2) Download Mobile Registry Editor: http://www.zipsoft.ru/catalog/mobile_registry_editor-v1_11.html
Also run with working Activesync connection
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
FYI, here are some other useful software packages that relax the security.
http://forum.xda-developers.com/showthread.php?t=285344
http://www.internet-tools.co.uk/blog...tegory/mobile/
http://www.internet-tools.co.uk/blog...sda_unlock.zip
http://sedacka.saman-cz.com/ppc/inde...unlocking.html
http://forum.xda-developers.com/showthread.php?t=338433 --- the first file in this article.
4) Restart
P.S. Special THANKS to JZ SmartMort
Click to expand...
Click to collapse
after using sec config manager...i cannot sync with outlook by USB also wifi account exhange not working any help?
set back the original registry values
i have same problem with certification. And i have done with the registry values. but after a week, my phone goes slowly than ever.
I want change my registry value to normal. if any, would you please help me to write the original values of registry? i am using HTC touch pro 2 Rod 400 from US Cellular. Thank you.