I opened the mtty program and type info 2, it pop up "HTCSSuperCID 婩軫TCEUSB" can anyone tell me what does that mean? thanks!
Wild guess here but prolly means you have an HTC SIM Unlocked device connected to the USB port?
Eeric, why are you typing info 2 into mtty?
V
Related
Hi! I got a serious problem with my Trion. I unlockedthe device with HTC Hermes SIM & CID Unlock – v2a.After this, I started the upgarde software for upgrading to 1.35.255.102. My device fell from the table and USB connection was lost at the stage of 5% upgrading. Device now starts only in bootloader mode, stating SPL-1.09. When I try to restart the flash, it tells me: Invalid Vender ID. I tried to fix the problem with the solution recommended in Wiki :
Problem 4: Device is stuck in bootloader mode (tri-color screen)
Disable ActiveSync: connections -- settings -- uncheck "Allow USB Connections"
Remove the battery, put it back in, connect the USB cable, power on the unit (this should allow the USB port to be opened again)
Wait a minute or two, if you get a message that device cannot be recognized just close and ignore it
Open mtty.exe and select "USB" from the dialog box, then hit Ok.
You should see a white screen, hit enter and you should see a prompt like this: "USB>"
Type set 14 0 (do not copy and paste!!!) and hit enter
Soft reset with stylus
OS ROM and radio version should be back and OS functional, the unit isn't a BRICK anymore!
but no success. Can anybody help me there?
attached the USB log file. please help
research12 said:
attached the USB log file. please help
Click to expand...
Click to collapse
Corrupted CID and bootloader 1.09. If you can't boot the OS send it to service centre to repair.
thanks, pof. I appreciate your reply even though it was the answer I was afraid of...
I am sorry to give that answer, there is so many people with the same probelm, but still haven't figured out a way to fix this...
you don't have to be sorry at all. you are a great help with most things here in the forum.
Guys,
Please help, I have SuperCID hermes with bootloader 1.01 and when i want to upgrade at any rom i get update error message....
Please please please
thanx
And now i'm stuck on bootloader screen. When i want to softreset it keeps loading bootloader....
and when i connect it via mtty.exe i get "unable to open USB port" message
ok listen carefully so u understand all info will be erased u have to soft keys above the windows key and above the ok key which are above the send and end keys hold the 2 soft keys and press soft rest button this is recovery mode open keyboard hit R then it will tell u to hit the space bar this will resore software good luck
franula said:
and when i connect it via mtty.exe i get "unable to open USB port" message
Click to expand...
Click to collapse
Turn off USB connections in active sync. then mtty.exe should work!
then upgrade to spl1.04!
now you are able to flash complete upgrades, this doesn't work in 1.01MFG
it should work again after this!
trion said:
Turn off USB connections in active sync. then mtty.exe should work!
then upgrade to spl1.04!
now you are able to flash complete upgrades, this doesn't work in 1.01MFG
it should work again after this!
Click to expand...
Click to collapse
It wont open USB port
franula said:
It wont open USB port
Click to expand...
Click to collapse
do you have another computer? also, can you confirm you have actually disabled USB connections in Activesync?
msn on 3 uk
Is anyone using a 3 uk simcard in a hermes tytn or spvm3100. Im having problems connecting to msn and skype via gprs.
i'll let you know as soon as i come back from work.
thanx for help
Just got my 8525 in the mail. I had the newest rom from cingular.
2.15.502.3 04/09/07 SPL 1.09
I tried to use the "HTC_Hermes_SIM_CID_Unlock_v3a"
I was able to get to the RGB screen where it said:
IPL-1.01
SPL-1.40.olipro
After that the progam said the device not connected.
I remove the battery, the program was able to flash to 28% and then
device not connected error again.
This time I remove the battery, reset, but when the program started
to verify my phone, it said error 260: connection. I tried a few times
but still the same. I am sure it's connected because the word changes
from serial to USB when I plug it in. I even try mtty to get out of the
RGB screen but no luck.
Can anyone help? I am almost going crazy!!!
Thanks.
Looks like it's my USB port that's very unstable.
Use another USB port from my PCI card and it finally recognize
my 8525..
whfew...!!!
I am relieved...
One thing I am confused is that How do I know that whether my G4 is CID locked or not?
1>e.g. I asked this because say I bought the G4 from another seller 2nd hand. I don't know whether he has Cid unlocked or not
2>e.g. I just used the aWizzard tool to upgraded my G4 from wm5 to wm6. During the process there was one phase --- CID unlocking, after which it told me that my deviced had been successfully CID unlocked. Does that mean that I have a CID unlocked G4 for ever?
3>If I have a CID unlocked Wizzard whatever G3 or G4, does this mean that I will be very safe to flash any rom to my device, if we don't consider the bricking thing made by human or operation errors?
Nobody ever has this kind of questions ????????????????????
I am confused !!!!!!!!!!!!!!!!!!!!!!!
Just use mtty1.42 and launch "info 2"
if it appears like this
info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
***** user area size = 0x79280000 Bytes
HTCSSuperCID ' HTCE
Cmd>
Click to expand...
Click to collapse
It is unlocked
Best regards
How to launch info 2??
I have mtty1.42.exe, i run it and then i get setting open port settings. click Ok.
And then what??
don't know where to download.
have mtty 1.0
Choose USB, doesn't connect to my phone
Launch MTTY1.42
Choose the USB connection
Then, in the open windows, you have only to write
info 2
and enter
wait for the reply
and have a look to see if your wizard is CIDlocked or not
Seiya said:
Launch MTTY1.42
Choose the USB connection
Then, in the open windows, you have only to write
info 2
and enter
wait for the reply
and have a look to see if your wizard is CIDlocked or not
Click to expand...
Click to collapse
Thanks mate. I will have try after 3 hours when I get back home.
Do I need to turn off the ActiveSync when using the Mtty?
Btw, I can only find MTTY1.0 in XDA-Developers. Is it possible for
you to upload a 4.2 and attach it here.
Cheers.
Hi!
Recently I try to flash my SPV m3000 using HardSPL and then shelltool (with a rom wm6 HTC Professional)
And now, my pda still on orange page where I can see SPL and IPL version.
(IPL : 2.16.0001 SPL : 2.16.0001)
If I try something :
Hardspl doesnt find my mobile device!
Shelltool doesnt work and still not responding!
Any RUU say ERROR [260] Update error : The update utility cannot connect to your PDA phone!
I try that in bootloader mod. My PC see my device (in "Gestionnaire de périphérique" I dunno how to say that in english!), but Windows Mobile Device Center doesnt!
Can someone help me please?
Thx
I think that basically your device is unknown to windows enter bootloader manually yourself, do not connect it. Then open windows mobile devicecenter and select connection settings and untick the allow usb connections then connect the device and try to flash it.
I also hope you realise that you have a G4 device and are not trying to flash a g3 hardspl go here to get hardspl for g4
http://forum.xda-developers.com/showthread.php?t=332320
windows Vista is not recommended for HardSPL,its not compatible,still got issues.Try to do on winXP pc and use ActiveSync 4.5,there shudn't be any problem.
Well! there's no 'G3 HardSPL' as yet!!! its only 'HardSPL' for G4 devices.
Thx all!
Ill try on XP..
Ill say the result..
So I try.. and always the same message ERROR NO DEVICE DETECTED
I try that with XP Activsync 4.5 and my spv connected in bootloader and connected less bootloader!
So if u have any other idea.. Welcome!
You have connectivity problem,to verify if the phone is establishing connection with pc via usb cable,get the phone into Bootloaders then connect it with pc through usb cable and check small usb appear at the bottom of the Bootloader screen,if its there,than its establishing,otherwise there's a connection problem.Either usb cable is faulty or the mini usb port of the phone is damaged.
...
Its written USB in bootloader and I can see my spv in device manager..
So I explain what I think.. Maybe theres only the bootloader of orange on my spv on no more wm5.. and I cannot flash only the bootloader..
If any idea come.. Already thx!