One thing I am confused is that How do I know that whether my G4 is CID locked or not?
1>e.g. I asked this because say I bought the G4 from another seller 2nd hand. I don't know whether he has Cid unlocked or not
2>e.g. I just used the aWizzard tool to upgraded my G4 from wm5 to wm6. During the process there was one phase --- CID unlocking, after which it told me that my deviced had been successfully CID unlocked. Does that mean that I have a CID unlocked G4 for ever?
3>If I have a CID unlocked Wizzard whatever G3 or G4, does this mean that I will be very safe to flash any rom to my device, if we don't consider the bricking thing made by human or operation errors?
Nobody ever has this kind of questions ????????????????????
I am confused !!!!!!!!!!!!!!!!!!!!!!!
Just use mtty1.42 and launch "info 2"
if it appears like this
info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
***** user area size = 0x79280000 Bytes
HTCSSuperCID ' HTCE
Cmd>
Click to expand...
Click to collapse
It is unlocked
Best regards
How to launch info 2??
I have mtty1.42.exe, i run it and then i get setting open port settings. click Ok.
And then what??
don't know where to download.
have mtty 1.0
Choose USB, doesn't connect to my phone
Launch MTTY1.42
Choose the USB connection
Then, in the open windows, you have only to write
info 2
and enter
wait for the reply
and have a look to see if your wizard is CIDlocked or not
Seiya said:
Launch MTTY1.42
Choose the USB connection
Then, in the open windows, you have only to write
info 2
and enter
wait for the reply
and have a look to see if your wizard is CIDlocked or not
Click to expand...
Click to collapse
Thanks mate. I will have try after 3 hours when I get back home.
Do I need to turn off the ActiveSync when using the Mtty?
Btw, I can only find MTTY1.0 in XDA-Developers. Is it possible for
you to upload a 4.2 and attach it here.
Cheers.
Related
here is what I've done and what happened:
my ROM was HTC 1.18.255.3 07/22/06 with bootloader 1.04 then I ran "HERM_Unlock_v2a.exe" on the device but I didn't use "HTC_Hermes_Radio_for_SIMunlock_v1.16.00.69" to save time and i wanted a CID unlock only.
after "SUCCESS!" message from "HERM_Unlock_v2a.exe", I connected my device via USB to PC and started to upgrade to Cingular 1.31.502.1 08/30/06 with aku 2.6 and bootloader 1.06 but when I get the "ID ERROR",without disconnecting the USB, I switched back to ugrading to previous ROM HTC 1.18.255.3 and the Processe started with no problem untill 98%, then suddenly upgading interrupted a message came saying connection error or somting like that!
since then my device is stuck on windows mobile screen and I've tested solutions in the "Hermes_Upgrade Problems" page and tried using the "Hermes SD Card flashing" method, But It seems impossible to flash my phone agian.
Help me PLEASE,HELP
someone help me please!
POF can't you help me please
I think Pof is away until 3rd december, I have the similiar problems with my second hermes, if you have then use mtty to see if you have an corrupted cid using info 2.
Do you have the original rom to go back on if so that will fix your problem.
I've used mtty to send some commands to my device and it answers to some of them but It just stop responding when I type "info 2" or "info 3".
and i tried this in mtty:
"
USB>checkimage
IPL CRC checksum = 0x9FCC6BEB
SPL CRC checksum = 0x3BF03635
CE CRC checksum = 0xC0E1751A
ExtROM CRC checksum = Total Block= 1024
dwBlockIndex= 1024
Address Error1!!!
Get checksum ERROR!!!
0x0
Radio Image CRC checksum =
"
again It stop responding
also tried upgrading, no matter which ROM I try, it just can't connect to device.
and thanx for your relpy.
hi, since there is NO htc service center available around me I have to do something about it myself but my phone is still dead and I'm using a nokia 1101. PLEASE someone help me, pof are you back? can you help me?
I've tried all in this page:
"http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems"
and this one too:
"http://forum.xda-developers.com/showthread.php?t=280733"
and tested qtek 2020 rom but no use.
from what I've found out my device hang up and stop responding when it gets the "INFO 2" or "INFO 3" or "TASK 32" or perhaps any thing involving CID so no upgrading utility is able to connect to it, the only thing is to connect to it using "mtty.exe" which I've tried any command found here, but no use again.
and my SPL is 1.04
can anyone help me?
mht220 said:
I ran "HERM_Unlock_v2a.exe" on the device but I didn't use "HTC_Hermes_Radio_for_SIMunlock_v1.16.00.69" to save time and i wanted a CID unlock only.
Click to expand...
Click to collapse
Wrong, you also need a patched radio to CID unlock. Running only the exe file without the patched radio has no effect on the unit.
mht220 said:
from what I've found out my device hang up and stop responding when it gets the "INFO 2" or "INFO 3" or "TASK 32" or perhaps any thing involving CID so no upgrading utility is able to connect to it, the only thing is to connect to it using "mtty.exe" which I've tried any command found here, but no use again.
and my SPL is 1.04
Click to expand...
Click to collapse
Please attach usb monitor capture when trying to flash a ROM and a radio ROM. Otherwise can't help you.
here is exported files from usb-monitor:
and tanx for your reply
uuh... there must be something really wrong with it, no response to bootloader commands. If no sd card flashing is possible, I would suggest you to send it to service centre too.
pof said:
...I would suggest you to send it to service centre too.
Click to expand...
Click to collapse
It's a difficult option for me, as I should send it to a foreign country to service center,so are you sure there is no way like erasing somewhere using mtty?
pof said:
... no response to bootloader commands...
Click to expand...
Click to collapse
but it respond to some of them in mtty.exe e.g. "erase", "set" and some other.
pof said:
...If no sd card flashing is possible...
Click to expand...
Click to collapse
no it would stuck in "checking..." forever
tanx
HI,
I have same exactly problem on my spv m3100: since sept06 I've tried every kind of Unlock software,upgrade ROM and method found in xda..In mtty bootloader (spl 1.04) respond at every command but not "info 2","info 3" and "task 32".Sd card method works but if you try to upgrade other ROM,in your screen "loading..." and then "checking..." hangs on because the ROM upgrade must to match CID (I suppose..).I'll wait the next ROM Upgrade and ORANGE won't release it until gen07..
warrio said:
I'll wait the next ROM Upgrade and ORANGE won't release it until gen07.
Click to expand...
Click to collapse
it seems your problem is like mine if so, I don't think ANY normal upgrade can solve your prolem 'cause it can't connect to it.
so don't wait and send your device to service center, if you can.
I'm in your same conditions:there's no repair center here so I have to wait Orange who release a upgrade Rom (I hope asap..).
Hi, i done a fair amount of searching but to be honest there just to many posts about this to get a answer to be sure of.
If someone could spare a moment to help out i be grateful of there time.
1) How do it tell if my phone is CID locked ?.
I sure mine is a G4 model now, but i updated rom and so on, and all works ok there, but i am unsure if i used a locked rom update. So i am unsure, of course i dont wish to brick my phone like some have.
2) I live in England, UK, and like to know what are the newest roms and radio rom for my area.
Currently i have the following....
IPL 2.16.0001
SPL 2.16.0001
GSM 02.07.10
OS 2.16.9.1
Rom Version 2.16.9.1 WWE
Rom Date 2/6/06
Radio Version 02.07.10
Protocol 413.1.03
I read that radio roms do the phone side of things, and would like to update that as i get a few drops on calls, i use O2. What is the best one i can use, also can i use a radio rom from another area not just European ?
I like to test out WM6 but like others lead me to an error on CID locking (300 error code) hence i like to confirm i have a CID locked phone, but i was told when purchased it was fully unlocked.
Any help would be very greatful.
hjkl;' why no delete?
M3NF said:
Hi, i done a fair amount of searching but to be honest there just to many posts about this to get a answer to be sure of.
If someone could spare a moment to help out i be grateful of there time.
1) How do it tell if my phone is CID locked ?.
I sure mine is a G4 model now, but i updated rom and so on, and all works ok there, but i am unsure if i used a locked rom update. So i am unsure, of course i dont wish to brick my phone like some have.
2) I live in England, UK, and like to know what are the newest roms and radio rom for my area.
Currently i have the following....
IPL 2.16.0001
SPL 2.16.0001
GSM 02.07.10
OS 2.16.9.1
Rom Version 2.16.9.1 WWE
Rom Date 2/6/06
Radio Version 02.07.10
Protocol 413.1.03
I read that radio roms do the phone side of things, and would like to update that as i get a few drops on calls, i use O2. What is the best one i can use, also can i use a radio rom from another area not just European ?
I like to test out WM6 but like others lead me to an error on CID locking (300 error code) hence i like to confirm i have a CID locked phone, but i was told when purchased it was fully unlocked.
Any help would be very greatful.
Click to expand...
Click to collapse
Here is what you have to do:
- download any G4 rom from xda ftp
- unpack it
- replace the update tool from the WM6 one with the one from the G4 rom (when you will run it, it will be in italian)
- don`t worry about bricking your phone, it can only happen if you try to update your IPL/SPL and the WM6 ROM doesn`t include those upgrades.
(if your Wizard is CID-locked, after the upgrade, your OS will be the same one you had before the upgrade, if not, be happy) )
I can give a little help if you feel you can trust me.
Use a little program called pdocread.exe (by itsme) and read the bdk1 using the following command:
pdocread.exe -n 1 0 0x10000 [saved_filename] and then contact me via PM to send me the encrypted file so that i can read it and check the CID value. I must warn you that the resulting file will have your phone's IMEI in it.
For this program to work your phone must have RAPI and Unsigned Apps enabled
You could also use mtty.exe program to check the CID status by using the info 2 command
Code:
Cmd>info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
***** user area size = 0x3D080000 Bytes
[B] [COLOR=Blue]HTCSSuperCID ' HTCE[/COLOR][/B] <------- CID status!!!
To be honest i'd prefer the first solution since i'm writing a Wizard service tool and as my phone is a full unlocked Qtek i need locked CID blocks to compare and understand a bit more about that zone.
cheers
Sent email with pdocread info. Here are my mtty results.
PHP:
Cmd>info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
***** user area size = 0x3C8C0000 Bytes
HTCSWIZCNG01 »“4‚HTCE
Cmd>
I assume the "HTCSWIZCNG01" is just verifying what I already knew? That I am CID locked to cingular?
I managed to get a list with a lot of CID codes for different operators and will check your value (once i find the file ) but i also believe that your phone is indeed CID locked; sorry
Many thanks for the details, tried it last night but would not change, so i at least know i have a cid locked system now.
Maybe wiorth getting it unlocked, but to be honest it was more of a wanting to know if it was or was not, know i know that i happy with what i got. Maybe an offical update will work when its released.
Again cheers all for your help and advice.
Any further info still be greatful with details of first post about radio roms still if you can.
Thunder_PC said:
I assume the "HTCSWIZCNG01" is just verifying what I already knew? That I am CID locked to cingular?
Click to expand...
Click to collapse
Yep, that CID is indeed from Cingular. Check with the file attached i extracted from some file i can't recall exactly which and where i got it...
Thunder_PC said:
Sent email with pdocread info
Click to expand...
Click to collapse
Pls make new dump as it should be 64Kb (0x10000)
Hi, please someone can tell me , as i think, my 9100 is CID unlocked?:
Cmd>info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
***** user area size = 0x1E880000 Bytes
HTCSWIZQTK01 µ…“HTCE
Cmd>
After do a CID unlock with awizard, rechecked and still showing the same.
but when i try to dump rom doing "r2sd all" in mtty1.42 it doesn´t allows me. In awizard done.
Cmd>r2sd all
***** user area size = 0x1E880000 Bytes
R2SDBackup() - Download type = 5
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
Cmd>
If it´s unloked, i supose, after reading forums, that i can change rom from WWE to last Spanish (2.18....)
IPL/SPL: 2.17.0001
GSM 02.07.10
OS 2.17.7.2
wait your answers. Thanks.
A quick search around the forum would have shown you that it's not possible to CID unlock a G4 device for free.
Yours is a G4 and if you compare with my values from post #4 you can see that yours isn't CID unlocked
cheers
Thanks.
i suposed that as wasn´t in CID list was unlocked. But i get it more clear.
So the only ways to change rom and language are, or pay or try it with the Solutuion found: how to flash any rom to CIDLOCKED DEVICE.
TOM_WILE said:
Thanks.
i suposed that as wasn´t in CID list was unlocked. But i get it more clear.
So the only ways to change rom and language are, or pay or try it with the Solutuion found: how to flash any rom to CIDLOCKED DEVICE.
Click to expand...
Click to collapse
Yep, either with ShellTool or with my Wizard Service Tool that allows to flash the OS binary partition
cheers
mestrini said:
Yep, either with ShellTool or with my Wizard Service Tool that allows to flash the OS binary partition
cheers
Click to expand...
Click to collapse
Hi again, it´s done.
I did it with "QTEK Rom 2.18.7.8 AKU2 ESN + Radio 02.47.11 Con CID Bloqueado by jossma". It works great, and in spanish. I have to "repair" a little problem with keyboard.
i´m happy. thanks for all. jejeje
sos.sos.sos
I have blocked SPV M3000
CID: WIZORGB8
Phone is CID LOCKED!
Which withdraw drinking
plz HELP ME !!!!!!!
hi everyone I know im posting in the wroge thread but this site is really huge, I need any help cuz i begin to hate my ppc and im stiil a student and cant buy another one cuz my father is really anoying, so i got an i-mate pda2 which i really love its design but the prob. is wm2003se there is no other roms i can find + i dont know how to get this cid unlocker and any rom just any , i will be pleased v.much for help i want the links where i can find a cid unlocker and a new rom which can run manila or wm5,6 plz helppp :'(
Hi,
First many thanks to all people here at the forum who makes the day better and more interesting for mobile nerds like me. I have been lurking around here for a long time and enjoyed every minute of it.
My problem :
Since my x7500 is SIM unlocked and with a standard setup as far as I can see I tried the HTC VM6 Rom flash without CID unlock.
That was stupid. Very stupid, since I don't have the providers orginal ROM available.
My x7500 will not accept the HTC VM6 ROM and is stuck in Bootloader with "USB" at the bottom of the screen when connected to my PC. Hard reset does not start the normal "installation"
When I start the VM6 flash program I get the famous "provider error message"
Is there any possibility to unlock the CID in Bootloader or "flashing" the bootloader to use the original ROM image at my device for a re-install ? In that way I could use the X7500 unlocker in VM5 and then flash to VM6 after.
If not re-installing the original ROM or unlocking the CID is possible I guess my x7500 is seriously bricked.
I am sorry if the answer to my problem can be found in other treads here. I have searched and read a lot without any success. I know now that I should have unlocked the device before trying to flash -> can only blame my one stupidity.
I will be very happy for every advice.
Greetings, Eric
EricBr said:
Hi,
First many thanks to all people here at the forum who makes the day better and more interesting for mobile nerds like me. I have been lurking around here for a long time and enjoyed every minute of it.
My problem :
Since my x7500 is SIM unlocked and with a standard setup as far as I can see I tried the HTC VM6 Rom flash without CID unlock.
That was stupid. Very stupid, since I don't have the providers orginal ROM available.
My x7500 will not accept the HTC VM6 ROM and is stuck in Bootloader with "USB" at the bottom of the screen when connected to my PC. Hard reset does not start the normal "installation"
When I start the VM6 flash program I get the famous "provider error message"
Is there any possibility to unlock the CID in Bootloader or "flashing" the bootloader to use the original ROM image at my device for a re-install ? In that way I could use the X7500 unlocker in VM5 and then flash to VM6 after.
If not re-installing the original ROM or unlocking the CID is possible I guess my x7500 is seriously bricked.
I am sorry if the answer to my problem can be found in other treads here. I have searched and read a lot without any success. I know now that I should have unlocked the device before trying to flash -> can only blame my one stupidity.
I will be very happy for every advice.
Greetings, Eric
Click to expand...
Click to collapse
There were four ROMs posted here some time ago. At least one of them didn't require the unit to be SPL / CID unlocked. Try to get hold of one of those - look in the Athena WM6 forum (where this should have been posted)
ROM
apd said:
There were four ROMs posted here some time ago. At least one of them didn't require the unit to be SPL / CID unlocked. Try to get hold of one of those - look in the Athena WM6 forum (where this should have been posted)
Click to expand...
Click to collapse
Thanks for reply.
I suppose you mean this four Rom's :
http://uploaded.de/?id=j2pv51 - ROM ver 2.20
for use with the athena_upgrade program
http://uploaded.de/?id=0v9mm1 - flasher for SuperCID devices only
works only for supercid devices
http://uploaded.de/?id=430xr4 - HTC__001 - version with spl,ipl and etc
works with CID HTC__001 and SuperCid
http://uploaded.de/?id=wbbw2u - T-MOB005 - version with spl,ipl and etc
works with CID T-MOB005 and SuperCid
As I understand my x7500 is not unlocked/superCid'ed and I need a ROM with exactly the same CID as on my device. Or am I far out ?
Or should I be able to use one of them even if the CID don't match ?
Thanks, Erik
EricBr said:
Thanks for reply.
I suppose you mean this four Rom's :
http://uploaded.de/?id=j2pv51 - ROM ver 2.20
for use with the athena_upgrade program
http://uploaded.de/?id=0v9mm1 - flasher for SuperCID devices only
works only for supercid devices
http://uploaded.de/?id=430xr4 - HTC__001 - version with spl,ipl and etc
works with CID HTC__001 and SuperCid
http://uploaded.de/?id=wbbw2u - T-MOB005 - version with spl,ipl and etc
works with CID T-MOB005 and SuperCid
As I understand my x7500 is not unlocked/superCid'ed and I need a ROM with exactly the same CID as on my device. Or am I far out ?
Or should I be able to use one of them even if the CID don't match ?
Thanks, Erik
Click to expand...
Click to collapse
I think you need this one:
http://uploaded.de/?id=430xr4 - HTC__001 - version with spl,ipl and etc
works with CID HTC__001 and SuperCid
mackaby007 said:
I think you need this one:
http://uploaded.de/?id=430xr4 - HTC__001 - version with spl,ipl and etc
works with CID HTC__001 and SuperCid
Click to expand...
Click to collapse
Hi Mackaby, thanks for the answer.
That was the first ROM I tried to flash. Gave me error message "wrong vendor, check your update software"
Now I only get bootloader when I start my device. I have(had) a Norwegian ROM so I guess the CID does not match. I wish I unlocked my device before trying the WM6 ROM but......
Now I am stuck : Cannot boot / install my original ROM or install any.
My hope is that I can either unlock my CID in Bootloader or installing the original ROM again with a hard reset. To bad a hard reset only sends me to bootloader.
try this commands in mtty:
set 14 0
task 8
If it doesn't boot OS after this, you need a rom matching your CID. It's not possible to CID unlock it from bootloader.
pof said:
try this commands in mtty:
set 14 0
task 8
If it doesn't boot OS after this, you need a rom matching your CID. It's not possible to CID unlock it from bootloader.
Click to expand...
Click to collapse
Hey Pof,
Welcome to the Athena forum. Are you planning on being here or you were just passing by...
pof said:
try this commands in mtty:
set 14 0
task 8
If it doesn't boot OS after this, you need a rom matching your CID. It's not possible to CID unlock it from bootloader.
Click to expand...
Click to collapse
Hi Pof ! Thanks for the answer and clarification. Will try today !
Greetings, Eric
pof said:
try this commands in mtty:
set 14 0
task 8
If it doesn't boot OS after this, you need a rom matching your CID. It's not possible to CID unlock it from bootloader.
Click to expand...
Click to collapse
Did it. Same result : Bootloader shows up after "task 8"
bootloader says :
athe100
ipl-v1.00
Athe100
SPL-v1.07.0000
red (raster)
green (raster)
blue (raster)
"Serial" when not USB connected, "USB" when connected in white field.
Guess I have to send my device for service since there are no ROM available for my local X7500 That's life
lpsi2000 said:
Are you planning on being here or you were just passing by...
Click to expand...
Click to collapse
Just passing by, sorry... i don't have athena
EricBr said:
Did it. Same result : Bootloader shows up after "task 8"
[...]
Guess I have to send my device for service since there are no ROM available for my local X7500 That's life
Click to expand...
Click to collapse
bummer..
Eric
As far as I know, all the athenas were provided withe the romcode ...if one hqs got the bonus pack.Just check withe someone for the bonus pack,,ai hope this helps.
hdubli said:
Eric
As far as I know, all the athenas were provided withe the romcode ...if one hqs got the bonus pack.Just check withe someone for the bonus pack,,ai hope this helps.
Click to expand...
Click to collapse
Hi Hdubli,
Thanks for the answer.
Bonus pack ? do you mean the CD that followed my x7500 ? I can check but don't think there are any ROM Flash application on that.
Sorry if I didn't understand your message correct
Greetings, Eric
If u buy bonus pack with athena which includes car kit etc etc, u also get CDs, in which the ROM is also there..so I was asking if u can get hold of the dealer from whom u hv got and enquire about it..also in mtty issue info 2 command check what is yr CID
hdubli said:
If u buy bonus pack with athena which includes car kit etc etc, u also get CDs, in which the ROM is also there..so I was asking if u can get hold of the dealer from whom u hv got and enquire about it..also in mtty issue info 2 command check what is yr CID
Click to expand...
Click to collapse
Ok, understand. We don't have anything called Bonuspack here with hardware stuff and ROM software.
This was the output from the mtty command :
Cmd>info 2
HTCSHTC__H10 ÅPýHTCE
Cmd>info 3
HTCSATHE100001.07.0000 ßؽôHTCE
Anything special with this ?
Anyone who knows if it is possible to mod a ROM flash file so that this CID will be accepted during install ?
EricBr said:
Anyone who knows if it is possible to mod a ROM flash file so that this CID will be accepted during install ?
Click to expand...
Click to collapse
That would corrupt the signatures, and it won't flash with an unmodified bootloader.
bootloader screen freeze after turning htc x7500 off
EricBr said:
Hi,
First many thanks to all people here at the forum who makes the day better and more interesting for mobile nerds like me. I have been lurking around here for a long time and enjoyed every minute of it.
My problem :
Since my x7500 is SIM unlocked and with a standard setup as far as I can see I tried the HTC VM6 Rom flash without CID unlock.
That was stupid. Very stupid, since I don't have the providers orginal ROM available.
My x7500 will not accept the HTC VM6 ROM and is stuck in Bootloader with "USB" at the bottom of the screen when connected to my PC. Hard reset does not start the normal "installation"
When I start the VM6 flash program I get the famous "provider error message"
Is there any possibility to unlock the CID in Bootloader or "flashing" the bootloader to use the original ROM image at my device for a re-install ? In that way I could use the X7500 unlocker in VM5 and then flash to VM6 after.
If not re-installing the original ROM or unlocking the CID is possible I guess my x7500 is seriously bricked.
I am sorry if the answer to my problem can be found in other treads here. I have searched and read a lot without any success. I know now that I should have unlocked the device before trying to flash -> can only blame my one stupidity.
I will be very happy for every advice.
Greetings, Eric
Click to expand...
Click to collapse
Thanks EricBr or anyone who can help me,
I have a similar problem, but in my case I didn't do anything to deserve it... I just turned off my new and provider unlocked x7500 after playing with it all day (just installed skype for mobile and customized some settings, tried the programs, etc.), and when I tried to turn it on again, it just froze in the bootloader screen... Nothing works, I tried soft and hard resets, don't know what else to do?
I've been reading al your posts everywhere and tried a few things without succes, when I conect my x7500 to my pc, it doesn't connect to activesync or anything. I guess I would do better if there would be someone who can create a reply that would clearly guide me on what to do and what files (with links) to download. I simply don't know what happened! since I didn't do anything especial to deserve this from my x7500 which I was falling in love with, after only a few hours of just getting to know it.
I'm new to xda's so please lay it down easy on me... Already had removed the sim and the miniSD I had installed on it... still nothing happens.
Hi,
went to imei-check.co.uk and got my CID unlock key. IPL & SPL are still showing X.XX.0001
Is the device unlocked, or not?
Ghostzapper
My G4 Wiz still displays the versions as you show, and it's unlocked.
I guess my answer is: I dunno.
the xx.0001 is not an indication of CID locked or not. It is an indication of the version (i.e. G3 or G4) your Wizard is. There is no easy way to check your CID status, other than flashing it. However, from what I can see so far, it doesn't seems to be beneficial to flash it all (i.e. CID-unlock) when ShellTool can do a very good job in a CIDlocked Wizard.
ghostzapper said:
Is the device unlocked, or not?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=295038
Thx @ all
Will see into this.
I unlocked the phone and tried to install NBD 9. Update process stuck at 52%. Managed to reflash original Vodafone ROM. Have restored my Data via SPB Backup and will try again after trying the Wizard Support Tool.
Gonna keep you informed
Ghostzapper
The "CID actions" includes a report on the CID lock status .. good luck!
There is an easy way to check if the device is CID unlocked:
Kill active sync (taskmanager kill wcescomm.exe)
Start wizard in bootloader (reset and hold voicedail butten untill red/green/blue window)
Open mtty.exe
select connection \\.\WCEUSBSH001 and press ok
in the new window type:
set 32 2
and press enter.
then the following will appear:
Code:
Cmd>set 32 2
+ SD Controller init
- SD Controller init
+StorageInit
***** user area size = 0x3C8C0000 Bytes
g_cKeyCardSecurityLevel = 0
HTCE
Cmd>
The g_cKeyCardSecurityLevel is the key!
if it is set 0 then the device is CID unlocked, else its locked.
Best regards,
EquinoXe
This is great information.
Possible to get a sticky or to add to the wiki?
Cheers!
Huckleberry88 said:
This is great information.
Possible to get a sticky or to add to the wiki?
Cheers!
Click to expand...
Click to collapse
haha no one's stopping you from adding it
Hi,
the-equinoxe said:
Open mtty.exe
Click to expand...
Click to collapse
where the heck can i download mtty.exe? Typed my fingers bleedy last night...
Ghostzapper
Got it.
Huckleberry88 said:
http://forum.xda-developers.com/showthread.php?t=295038
Click to expand...
Click to collapse
Thx.
The Tool tells me, that the device is CID unlocked although it fails to recognize the model as a wizard.
Since i have already installed the ShellTool Version of NBD 9, i will not bother going further into detail unless someone gives me a good reason to flash another rom. Ist there?
Ghostzapper
ghostzapper said:
Hi,
where the heck can i download mtty.exe? Typed my fingers bleedy last night...
Ghostzapper
Click to expand...
Click to collapse
It's on the FTP and also:
http://files.pdamobiz.com/ROMs/XDA/mtty1.42.rar
Best regards,
EqX
Thx a lot
Keep up the good work.
Ghostzapper
Hi,
I have got Prophet G4 bought from second hand. How can i check does it has CID lock or unlock?
lock\unlock check...
i checked mine by downloading tera term entering debug mode (hold camera button+reset then plugin usb...) enter this: r2sd all
if you get the following your G4 is locked
Cmd>r2sd all
***** user area size = 0x3CD80000 Bytes
R2SDBackup() - Download type = 5
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
Cmd>
Thanks for your advice. I've found another possibility. It's WST_v4.2.1 (Wizard Service Tool). It has many options, and CID lock\unlock check info.
marten said:
Thanks for your advice. I've found another possibility. It's WST_v4.2.1 (Wizard Service Tool). It has many options, and CID lock\unlock check info.
Click to expand...
Click to collapse
where can i get this wizard service tool???
its a cab file or pc file??
one thing where to learn to upgrade from wm5 to wm6 roms available here?? from the beginning,, like unlocking and alll...
Here you are topic about Wizard Service Tool: http://forum.xda-developers.com/showthread.php?t=329170
Merry Christmas