Hi all,
recently i upgrade my Tytn to last rom available here. I´m a bit disapoiting about this upgrade so i´m considering the possibility to roll-back to original rom.
Since last upgrade change my bootloader to 1.09 and my original was 1.04, to roll-back i just have to run rom package or i have to do something before the downgrade?
Thanks in advance
phariseu said:
Hi all,
recently i upgrade my Tytn to last rom available here. I´m a bit disapoiting about this upgrade so i´m considering the possibility to roll-back to original rom.
Since last upgrade change my bootloader to 1.09 and my original was 1.04, to roll-back i just have to run rom package or i have to do something before the downgrade?
Thanks in advance
Click to expand...
Click to collapse
Can you tell the inital and upgraded ROM / Bootloader versions ?
Hi,
I had this package:
ROM - 1.18.255.3 07/22/06
ExtROM - 1.18.255.106
Radio - 1.03.03.10
Bootloader - 1.04
and i instaled last one available here.
Rom - 1.35.255.2 11/14/06
Bootloader - 1.09
(....)
Let me say that i bought my Tytn "free" unlock. I have no problem about this issue.
Is there any problem instaling original package? Bootlader turns again to 1.04 or remains 1.09?
Thanks in advance
i think you still can downgrade it to the original rom version as the CID is the same, but the bootloader should remain 1.09. here's a quote from the wiki.
Bootloader 1.09 DOES NOT allow DOWNGRADING of itself by means of flashing earlier ROMs. Once installed it is IMPOSSIBLE to DOWNGRADE SPL 1.09 to 1.06 or 1.04 by regular means!
harryk1372 said:
i think you still can downgrade it to the original rom version as the CID is the same, but the bootloader should remain 1.09. here's a quote from the wiki.
Bootloader 1.09 DOES NOT allow DOWNGRADING of itself by means of flashing earlier ROMs. Once installed it is IMPOSSIBLE to DOWNGRADE SPL 1.09 to 1.06 or 1.04 by regular means!
Click to expand...
Click to collapse
doesn't making the device SuperCID fix this problem?
[edit] and by problem, I don't mean getting 1.04 back, I mean there's really no point since you can flash any ROM you wish anyway, and I'm seriously asking cause I'm not sure [/edit]
diseage said:
doesn't making the device SuperCID fix this problem?
[edit] and by problem, I don't mean getting 1.04 back, I mean there's really no point since you can flash any ROM you wish anyway, and I'm seriously asking cause I'm not sure [/edit]
Click to expand...
Click to collapse
yes, if your device is supercid, you can flash the roms from different vendors. what is recommended for all is making the device supercid while you are still at the bootloader 1.04. if your device was made supercid while you had the original rom with the bootloader 1.04, you shouldn't have any problems with flashing whichever rom although the bottloader will remain 1.09 in your case.
You can flash any ROM that matches your CID. If you have SuperCID you can flash every ROM. The bootloader will remain 1.09 though.
Related
Just upgrade my X01HT to 1.33.761.4 but the bootloader also upgrade to 1.09. How can I downgrade to 1.04? Thanks
http://forum.xda-developers.com/showthread.php?t=284401
steiale said:
http://forum.xda-developers.com/showthread.php?t=284401
Click to expand...
Click to collapse
Just downgrade to 1.04 now, thanks
Confirmation for the downgrade_spl
Hello
i got the file downgrade_spl.rar from net. After unzipping with winrar i see a file "downgrade_spl.nbf" inside it of size 769kb. Please confirm me if this is the correct file.
Also please let me know where do i find "ROMUpgradeUt.exe" file.
Thanks
This is the wrong filesize!
give me an e-mail and i`ll send u a tools.
please help me!!!!
I need tool for O2 trion, please help me.thanks
I need files, too.
Hello.
I'm searching for the files, "Downgrade_spl.nbf" and "ROMUpgradeUt.exe".
Anyone tell me where I get there, please?
and,
http://forum.xda-developers.com/showthread.php?t=284401
This solution is useful for SPL1.09?
version 1.09
x01ht bootloader version 1.09 can unlock rightnow ma...?please
unfortunately no.. pof mentioned something about the new ROM not having the write feature..
mizuchi said:
unfortunately no.. pof mentioned something about the new ROM not having the write feature..
Click to expand...
Click to collapse
correct. it requires to be able to flash the radio stack in order to unlock it, but the radio stack of that new rom seems to be read only and flashing another radio stack is not possible at this time.
I could not find in google as well but get somewhere else with slighly different filename. Not sure the same one or not. Can somebody please confirm,
Get it here.
http://www.filemirrors.com/search.src?type=begins&file=DownGrade
It's possible.
Hello I'm french, first sorry for my bad english.
I just bought a V1605 from england that I have immediatly unlocked.
I have tested French qtek ROM 1.18.256... but it's very slow and there are many bugs, after that I have tested a WWE qtek ROM 1.18.416... with bootloader 1.06 just for see if TCPMP was better and it is!
But I wanted the last Qtek ROM, so I have put the original ROM of my vodafone in order to downgrade bootloader to 1.04, it's very simple!
Then I've installed the latest QTEK ROM 1.35 with bootloader 1.09, and now after few very fast manipulations , I have bootloader 1.04 and radio 1.20.
So I can test every ROMs I think...
For the moment, I can see that this ROM (1.35) is very fast, and TCPMP works better but for the video it is the same than vodafone 1.20 or tytn 1.18.416 .
ghz said:
I could not find in google as well but get somewhere else with slighly different filename. Not sure the same one or not. Can somebody please confirm,
Get it here.
http://www.filemirrors.com/search.src?type=begins&file=DownGrade
Click to expand...
Click to collapse
Doesn't look like those are relevant.
1.04 to current boot rom?
After downgrading to 1.04 and doing all the upgrades, is there any reason to reupgrade 1.04 to a more current boot rom?
hi there,
seems i`m not able to downgrade after after flashing the 1.35 rom. my bootloader remains 1.09 and the downgrade_spl (1.8mb rar) tool doesn`t work properly. i always have to recover my device when i try to run the upgrade. is there something i do wrong or is my downgrade_spl the wrong one?
thanks jammerlappen
additional questions: am i able to flash a) other radio roms b) complete roms with bl 1.09 and supercid?
jammerlappen said:
is there something i do wrong?
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Hermes_Howto_Bootloader104&version=2
jammerlappen said:
additional questions: am i able to flash a) other radio roms b) complete roms with bl 1.09 and supercid?
Click to expand...
Click to collapse
a) no
b) yes
may something be wrong with the link in your llink?
thank you anyway! it is good news, i didn`t break my tytn (-:
it is an old revision of a page where there where the instructions initially... so the link is not there anymore... but you said you have it.
hmmm, the files i have obviously do not work
Hi guys,
sorry if this seems a silly question, but I really looked to see if I could find any info on this...but I might be just bad at searching?
Anyway, with the apologies behind us, here goes:
Is there any way to know (either from the version number or by any of you telling me) which AKU version the ROMS posted here have?
I currently have AKU 2.3 (in my 1.18.255.3 ROM, date 05/30/06, radio 1.03.03.10, 1.04 bootloader QTEK_001 CID) and am considering upgrading.
Do any of these roms contain a newer AKU version? If so, which?
As long as I have your attention anyway: I've been reading a lot on upgrading on this (GREAT) forum, but it's slightly confusing: Am I correct in assuming that if I SUPER-CID my Hermes and flash it with a newer ROM with bootloader 1.09, that I can always go back to bootloader 1.04? Or is it that once I load 1.09 then I'm stuck with it?
victorclaessen said:
Is there any way to know (either from the version number or by any of you telling me) which AKU version the ROMS posted here have?
Click to expand...
Click to collapse
See here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
The column named "OS Build":
- if it ends in 2.3.0 means it's an AKU 2.3
- if it ends in 2.6.0 means it's an AKU 2.6 (currently only cingular's 1.31 rom)
victorclaessen said:
Am I correct in assuming that if I SUPER-CID my Hermes and flash it with a newer ROM with bootloader 1.09, that I can always go back to bootloader 1.04? Or is it that once I load 1.09 then I'm stuck with it?
Click to expand...
Click to collapse
By now, If you flash 1.09 you're stuck with it unless you use some "illegal" files that where removed from this forum some time ago. I am working on a new solution to downgrade, but is not ready yet...
Has anyone compared the 1.31 (aku2.6) and 1.35(aku2.3) roms yet? Any differences in speed or handling?
Hey thanks pof!
Ok in hindsight it seems logical to look at the build date for the AKU but I really overlooked that...DOH!
So I guess the best thing for the moment would be to wait for either a AKU 3.2 ROM or a way to revert bootloader 1.09 to 1.04.
As far as I understand it now: If I flash this Cingular AKU 2.6 ROM now I will get bootloader 1.09 and therefore I won't be able to upgrade to a AKU 3.2 ROM unless it happens to be a AKU 3.2 ROM with the same CID (from Cingular in this case, because that's the only AKU 2.6 ROM)
Check?
Not necessarily, you could CID-unlock your phone first.
so you mean that if I CID unlock my phone first, then flash it to a new ROM with bootloader 1.09, that it would still be possible to flash it back to some ROM with bootloader 1.04?
That is possible, but not directly. After upgrading to a rom with 1.09, you have to downgrade the bootloader to 1.04 via this method. After that you can flash any rom you want, or upgrade your radio-rom only, as i did.
ionide said:
That is possible, but not directly. After upgrading to a rom with 1.09, you have to downgrade the bootloader to 1.04 via this method. After that you can flash any rom you want, or upgrade your radio-rom only, as i did.
Click to expand...
Click to collapse
Wait, I thought even the imei-check method did NOT work on Bootloader 1.09. The Cingular ROM 1.34 is Bootloader 1.06 - so it should work there, but I thought NOT on Bootloader 1.09.
Am I confused?
Richard
victorclaessen said:
so you mean that if I CID unlock my phone first, then flash it to a new ROM with bootloader 1.09, that it would still be possible to flash it back to some ROM with bootloader 1.04?
Click to expand...
Click to collapse
Yes, if and only if you CID Unlock first you'll be able to flash ANY rom with bootloader 1.04 when you are on 1.09, BUT after the update the bootloader version will still be 1.09.
ionide said:
That is possible, but not directly. After upgrading to a rom with 1.09, you have to downgrade the bootloader to 1.04 via this method. After that you can flash any rom you want, or upgrade your radio-rom only, as i did.
Click to expand...
Click to collapse
This is only needed if you want to go back to bootloader 1.04, but not really necessary if you are happy with 1.09.
rsolomon said:
Wait, I thought even the imei-check method did NOT work on Bootloader 1.09.
Click to expand...
Click to collapse
It works on 1.06 and 1.09.
pof said:
It works on 1.06 and 1.09.
Click to expand...
Click to collapse
Ok, I think I got the radio rom issue confused with the bootloader - since they showed up in the same bulk pack upgrader.
Thanks for the clairification!
Richard
pof said:
This is only needed if you want to go back to bootloader 1.04, but not really necessary if you are happy with 1.09.
Click to expand...
Click to collapse
I couldn't upgrade my radio rom with 1.09, after downgrading to 1.04 i could.
I have the 8525, installed obviously is the newer ROM, but 2.3 AKU. Is the other ROM/AKU 2.6 package worth trying? I know there were only few updates w/2.6, why did they go back to 2.3 with the newer ROM?
patmannyc said:
I have the 8525, installed obviously is the newer ROM, but 2.3 AKU. Is the other ROM/AKU 2.6 package worth trying? I know there were only few updates w/2.6, why did they go back to 2.3 with the newer ROM?
Click to expand...
Click to collapse
Tried a few different ROMs on mine. Have found that the new 1.35 HTC South African ROM seems to work the best for me.
Thread is here: http://forum.xda-developers.com/showthread.php?t=284043&page=3
Post #26 has a nice comparison table compared to other ROMs, well worth a look.
S.K.
Thaks for the advice. I have upgraed to this ROM.
How do I set up the phone for data connections now that I am using this ROM? Do I have to set up manually? I triede unlocking and replacing the extended ROM w/Cingulars, but it didn't set up the 3g connection for me. I had to do it manually. Did I miss a few files? I'd hate to have to google the settings every time I hard reset...
I have searched and tried to find this answer, but now I am more confused... So please be gentle with the flaming.
I have an unlocked Cingular 8525. I down graded to bootloader 1.04 using Cingular ROM 1.30.502.1 and SUCCESSFULLY made my device superCID according to the detail direction in the wiki. THANKS FOR THE INSTRUCTIONS!!!
My confusion comes with the fact that I want to have newest OEM ROM from Cingular, 1.34.502.1, but I also want to upgrade the radio version... But when I upgrade to the newer 1.34.502.1 ROM, I get bootloader 1.06... BUT I read that I need bootloader 1.04 to change the radioROM... But as far I read, I would have to go back down to the earlier 1.30.502.1 ROM.
QUESTION:
How do I keep bootloader 1.04 with upgrading back to ROM 1.34.502.1, so I can have the newer ROM and be able to upgrade my RadioROM also?
Thanks
Ron
lokmeup said:
I have searched and tried to find this answer, but now I am more confused... So please be gentle with the flaming.
I have an unlocked Cingular 8525. I down graded to bootloader 1.04 using Cingular ROM 1.30.502.1 and SUCCESSFULLY made my device superCID according to the detail direction in the wiki. THANKS FOR THE INSTRUCTIONS!!!
My confusion comes with the fact that I want to have newest OEM ROM from Cingular, 1.34.502.1, but I also want to upgrade the radio version... But when I upgrade to the newer 1.34.502.1 ROM, I get bootloader 1.06... BUT I read that I need bootloader 1.04 to change the radioROM... But as far I read, I would have to go back down to the earlier 1.30.502.1 ROM.
QUESTION:
How do I keep bootloader 1.04 with upgrading back to ROM 1.34.502.1, so I can have the newer ROM and be able to upgrade my RadioROM also?
Thanks
Ron
Click to expand...
Click to collapse
Downgrade then install the 1.01MFG bootloader. After that extract the OS from the NBH of the ROM you want and flash it. You can then keep 1.01MFG bootloader or change it back to 1.04. Its all in the wiki.
jokinawa said:
Downgrade then install the 1.01MFG bootloader. After that extract the OS from the NBH of the ROM you want and flash it. You can then keep 1.01MFG bootloader or change it back to 1.04. Its all in the wiki.
Click to expand...
Click to collapse
Ahhh... thanks for the push in the right direction!
Ron
Couldn't you just upgrade the Radio and the Extended Rom and still have the old boot loader?
Wouldn't this provide the same end result?
lokmeup said:
I have searched and tried to find this answer, but now I am more confused... So please be gentle with the flaming.
I have an unlocked Cingular 8525. I down graded to bootloader 1.04 using Cingular ROM 1.30.502.1 and SUCCESSFULLY made my device superCID according to the detail direction in the wiki. THANKS FOR THE INSTRUCTIONS!!!
My confusion comes with the fact that I want to have newest OEM ROM from Cingular, 1.34.502.1, but I also want to upgrade the radio version... But when I upgrade to the newer 1.34.502.1 ROM, I get bootloader 1.06... BUT I read that I need bootloader 1.04 to change the radioROM... But as far I read, I would have to go back down to the earlier 1.30.502.1 ROM.
QUESTION:
How do I keep bootloader 1.04 with upgrading back to ROM 1.34.502.1, so I can have the newer ROM and be able to upgrade my RadioROM also?
Thanks
Ron
Click to expand...
Click to collapse
I had the EXACT same question...It turns out that you can upgrade the radio with the German version since your device is SuperCID. So I was able to upgrade to radio 1.27 with BL 1.06
..... and then....
I learned about the 1.01MFG wiki ... and I followed the instructions and was able to (first) flash 1.01MFG and (second) flash BL 1.04... so now I have 1.34 ROM, 1.27 Radio and 1.04 BL...
It took alot of reading and questions for me to figure it out....I hope my pain is your gain.
Just want to summerize the situation for existing 1.09 owner of X01HT, the current state of the unlocking process is follows:
1) Unlock 1.09 can ONLY be done by imei-check (GBP $20)
2) After unlocked, your device will be SUPER-CID
3) Then it can be flashed BL MFG 1.01 in order to upgrade BL to 1.09 for
upgrading the radio rom (currently only radio ver. 1.27 can be flashed)
OR if you dun need the phone function, just want to use PDA instead BUT want to use your desire language rom (Chinese, French etc.....)
1) You need this software "DownGrade_SPL.rar" to downgrade your BL to
1.04 in order for you to be able to flash other language OS.
2) "DownGrade_SPL.rar" can be found on the search engine like google or
china search engine like baidu.com.......
Hope this help
Thank you mj13,this helps.I wonder if there is a future plan for free unlocker.
It's a bit better than this.
With SuperCID & 1.01MFG BL you can easily go to 1.04 BL. Instructions on this are in the Wiki and the 1.04BL itself is included in the 1.01MFG bl download.
The bootleg 1.04bl downgrade solution is no longer required!
or... If you're more technically inclined you can flash using 1.01MFG bootloader...
you can extract os.nb from the rom of your choice using pof's nbhextract tool then just flash it directly using the "lnb" command in the 1.01MFG bootloader. Instead of 30 minutes, this will take < 5 minutes.
While you're at it, change your splash screens too
May I ask one thing? If I already in 1.04. Could I use the unlock from IMEI directly?? Furthermore, I can' input chinese. Are your PPC OK?
Is after # 2 enough to unlock the X01HT Post December release?
mj13 said:
Just want to summerize the situation for existing 1.09 owner of X01HT, the current state of the unlocking process is follows:
1) Unlock 1.09 can ONLY be done by imei-check (GBP $20)
2) After unlocked, your device will be SUPER-CID
3) Then it can be flashed BL MFG 1.01 in order to upgrade BL to 1.09 for
upgrading the radio rom (currently only radio ver. 1.27 can be flashed)
OR if you dun need the phone function, just want to use PDA instead BUT want to use your desire language rom (Chinese, French etc.....)
1) You need this software "DownGrade_SPL.rar" to downgrade your BL to
1.04 in order for you to be able to flash other language OS.
2) "DownGrade_SPL.rar" can be found on the search engine like google or
china search engine like baidu.com.......
Hope this help
Click to expand...
Click to collapse
Please clarify if after # 2, the X01HT is unlocked already. I just confuse why to do the flashing. Many thanks in advance.
junulrik
wiccawaiwai said:
May I ask one thing? If I already in 1.04. Could I use the unlock from IMEI directly?? Furthermore, I can' input chinese. Are your PPC OK?
Click to expand...
Click to collapse
Of course can be unlocked, is it flashed to chinese OS already?
junulrik said:
Please clarify if after # 2, the X01HT is unlocked already. I just confuse why to do the flashing. Many thanks in advance.
junulrik
Click to expand...
Click to collapse
#2 is unlocking the phone, but if you need to upgrade the radio version, it is better to do the #3 process as MFG 1.01 let you just upgrade the BL itself instead of FULL ROM upgrade. Of course, if you are satisfy with your current radio version, #2 will be just fine.
mj13 said:
Of course can be unlocked, is it flashed to chinese OS already?
Click to expand...
Click to collapse
I already flash to chinese ROM (DOPOD)
wiccawaiwai said:
I already flash to chinese ROM (DOPOD)
Click to expand...
Click to collapse
You mean there is no option for chinese input like handwriting?
thanks mj13
thanks mj13..
mj13 said:
You mean there is no option for chinese input like handwriting?
Click to expand...
Click to collapse
I have the chinese input. But no chinese word out.
But it is OK now (After I reset the PPC) Thanks all of your help.
Wish me good luck. I will do the unlock this Friday.
Dear Community, Dear Experts, Dear Gurus ,
I am hoping for your help. Unfortuntately the Speaker in my HTC TyTn died
and I need to send back the TYTN to the service center in order to get most likely the speaker replaced ( dead ).
Here my isue:
I want to flash the original stock rom, which is:
RUU_Hermes_1.18.257.2_1.18.257.106_1.03.03.10_Qtek_GER_Ship.exe
I have running now and downgraded from WM6 to WM5:
HTC_BOOT HERM200 IPL-1.04 SPL-2.10.Olipro ->>> not OK :-(
ROM HTC German QTEK_102 1.18.257.2 05/30/06 ->>> OK
EXTROM 1.18.257.106 ->>> OK
RadioRom 1.41.00.10 ->>> not OK :-(
Protocol 32.34.7010.01H ->>> OK
OS Build 14955.2.3.0 ->>> OK
AKU 2.3 ->>> OK
The issue is now, how can I restore the original bootloader ? I can only
flash the rom with the RUUWrapper, the result of flashing the original stock
rom is then, that I am still stuck with the modified bootloader and a corrupted
radio rom. Radio Rom was "fixed" by me by flashing the latest version.
If I would try to use the original flasher I would always get an Update Error [260].
So what can I do to resotre the HTC TyTn to its original status, so that the warranty is not voided ... original stock bootloader, radio rom image and so on.
Thanks a lot and hoping for your support, since I am realy lost here.
Sbrani
grab sspl (soft spl) and use that to flash a stock bootloader only.
as far as i know you cannot downgrade the radio due to it being bootloader 0108 variant, but not having a hermes i might be wrong
You can restore the original SPL bootloader by using SSPL but you will not be able to downgrade the Radio as the original has HTC_BOOT 0106.
You have already checked these guys that they haven't released an update?
First of all, thanks a lot for replying, but still the question is, how I can get rid of the HERM200 IPL-1.04 SPL-2.10.Olipro Bootloader. I would need to downgrade once again to the original HTC bootlader 106. As long as I have the other one, I will always end up, with a non working radio rom, since this stone old radio rom is not compatible with the new "IPL-1.04 SPL-2.10" bootlader. Any further Ideas ? Anyway the sspl (soft spl) did the trick and was able to flash orignal rom, but unfortunately with the same result, still not the original bootloader and the radio rom is now again corrupted :-(.
The bootloader hindering you from downgrading to the original radio is not the IPL/SPL combo but instead the built-in bootloader of the radio itself. Read more in the Wiki.
To put back your original SPL loader, use NBHextract to extract the SPL image from the ROM update file you used to downgrade the other bits in your phone, then use NBHgen to create an update file containing only the SPL and then use SSPL for the update.
Hey great support here ! Finally I also managed to restore the original bootloader, which is HERM200 IPL-1.00 HERM200 SPL-1.04. Now I only have to get the original radio rom running. Thanks a lot, seems that I can think now of actually reaching the final goal. I learned a lot. Great community !!!
You're missing the point about the radio. Let me repeat:
You can't install the original radio ROM. You will brick the phone!
abubasim is right, you have htc_boot 0108, so you can only flash radios with htc_boot 0107 or 0108, but not 0106. Your original radio has 0106, so if you flash it you'll get a NoGSM error and a bricked phone.
about downgrading to WM5
pof said:
abubasim is right, you have htc_boot 0108, so you can only flash radios with htc_boot 0107 or 0108,
Click to expand...
Click to collapse
Well Pof, abubasim, Couldn’t sbrani downgrade the radio with custom RUU to his own original Rom Radio first?? (almost the official known Radio is 1.38) then following your description. At that time he gone have WM5 Rom and same Radio as original, I just wondering if u can du like this
Don't worry guys I bricked several times now the radio rom . It's just that it is then extra work. I will keep you updated, as soon I have news, for now I can't see anymore those "upgrading" tools. I will try it again tomorrow.
you where able to unbrick because you had HardSPL, but now you have SPL-1.04 which will not allow you to flash unsigned code.
By the way, did anybody have experience with HTC or better to say HTC Serivce Providers. As far as I know I have to send it to Teleservice in Germany. Are they realy checking the installed rom ? Thanks for the info.
Ok, I made it finally, I will post exactly how I did it, maybe it helps someone who will be in the same situation.
Thanks once again, great SUPPORT !!
Sure you'd HELP me!
Hi there,
Hi Sbrani, I'm in the exactly same situation: HTC TYTN (Orange France) without speaker... and needing to go to french HTC support.
I upgraded both ROM and Radio to the latest versions following step by step the tutorial found here and on mr (???) on its website (very well done by the way).
Sbrani, Please could you help me to restore as you did, my factory defaults?
Regards
Fly
Can you give more facts ? Pls look into my first thread and put down the infos. Thx
Guideline: How to downgrade to an original rom
Ok here we go this is how I solved this issue.
First you need to understand the difference between a normal SPL
and the modified SPls, which you can get here:
http://forum.xda-developers.com/showthread.php?t=296722
A standard SPL will not accept any unsigned code !
In case you bricked it already look here :
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
1. you need to figure out, which radio rom matches your rom you want to flash, otherwise you end up with a bricked radio rom or even totally bricked,
if you have a standard SPL.
2.Please check it here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
for the roms
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
for the radio roms
3.Looking at my ROM, which I needed I flashed 1.10 - Olipro SPL - based on 1.04,
I flashed it by using SSPL.
4.I flashed then the needed the radio rom
which was Radio upgrade only using CustomRUU 4.3 V 1.38.30.10
5.I used then Custom RUU Updater flashing the needed rom,
but without the included radio rom.
Costum RUU Updater you can find here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_CustomRUU
extracting and modifying is explained here:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=22&Itemid=27
actually it is an how to downgrade from WM6 to WM6.
Please have a close look on how to extract the rom and how to create a
costum rom, which will fit your needs. The self made rom,
should then include the original IPL and SPL loader.
I finally used again SSPL to flash the self cooked rom.
Sorry if the guide is not very precise or not correct at all !!
Everybody is welcome to correct me and to finetune this guide.
LAST BUT NOT LEAST, please read the HERMES WIKI, it was a great help for me !!
Thank you!
You deserve a Very Very Warm thank you!
I'll try all you advised me this week-end.
Regards,
FlY
it's very good already. i think you should get it incorporated into MrVanx's guide as a downgrade for servicing section
Thanks for your guide sbrani, I have not had to downgrade yet, but it something that is in the back of my mind as I know it will be very difficult if I ever need to.
I would also second the comment that I would be very grateful to MrVanx if he wrote a general guide on how to return to factory condition , as it is much more involved than upgrading. It's one thing to flash a phone, a totally different thing to customise a ROM update in order to only flash a specified portion.
@sbrani:
What version is your radio ROM at now? 1.03.03.10 or 1.38.30.10?