Related
Although all the information can be found on the forum and in the HTC Hermes Wiki there are always many posts with questions about upgrading and unlocking. I hope this will make it a bit clearer for you:
Bootloader
The bootloader is the place where you can change the low-level software parameters and some hardware parameters of the Hermes, change and read the ROM and provides information about it.
The bootloader is invoked by pressing down both the POWER button and SIDE OK together and using the stylus at the same time to press the RESET button at the bottom.
The bootloader version is shown for a short amount of time when booting the device. You'll see "SPL-1.0X"
Versions
1.04
There is a bug in bootloader 1.04 wich allows you to flash any ROM without a CID check. You have to be in bootloader mode to use this bug.
It's possible to upgrade the RadioROM. You can even flash a patched RadioROM wich is needed to unlock your device.
1.06
The bug from version 1.04 is fixed. Without downgrading to a Shipped ROM with bootloader 1.04 that matches your CID it's not possible to flash a ROM with a different CID.
The RadioROM can't be upgraded. You have to downgrade to bootloader 1.04 to unlock your device.
1.09
You can't downgrade to bootloader 1.04 by flashing a Shipped ROM. However imei-check.co.uk is able to downgrade the bootloader.
There was a solution posted on this forum, but it was stolen from imei-check and was removed. If you are not willing to pay you have to wait until another solution is developed.
The RadioROM can't be upgraded. You have to downgrade to bootloader 1.04 to unlock your device.
CID
The CID your device has varies from operater to operater. It should garantee that only upgrades from a single operater can be installed (to ensure the device is branded etc.)
You can make your device SuperCID wich is some kind of "root-mode". Then you will be able to flash every ROM without thinking about bootloader versions and CIDs.
To find out wich CID your device has use the command "info 2" in bootloader. Read Hermes_BootLoader to know how to use the bootloader.
Preparations
Before you upgrade your ROM (wich will also upgrade your bootloader) you should make your device SuperCID.
Especially if you either upgrade to bootloader 1.06 and there's no Shipped ROM Upgrade with bootloader 1.04 available that matches your CID or upgrade to bootloader 1.09
Unlock / Make your device SuperCID
Use pof's SIM Unlock v2a. This will flash a patched RadioROM that is needed for the unlocking process. Unlock v2a makes your device SuperCID and removes the SIM-Lock.
You need bootloader version 1.04!
The process of flashing the RadioROM and use the unlocker is explained here
There is one restriction: At the moment it's not possible to unlock X01HT devices wich where bought after 12/1/2006 and have bootloader version 1.09 and RadioROM version 1.14.0.10! Please be patient.
Radio version can be checked from Start->Settings->System->Device Information:Radio Version.
Downgrade Bootloader
If you have bootloader version 1.06 and there is a Shipped ROM Upgrade with bootloader version 1.04 available that matches your CID you can flash it to downgrade your bootloader.
Otherwise - you are on bootloader 1.09 or there is no Shipped ROM Upgrade available - you have to use imei-check.co.uk or wait until another (free) solution is developed.
For the method imei-check uses to downgrade the bootloader a working operating system is required.
Upgrade the ROM
If you flash a ROM the first time you should read Upgrade For Beginners and the Upgrade FAQ if you have further questions.
Available Upgrades are listed here
Upgrade RadioROM
There are also Extracted RadioROMs available. You need bootloader 1.04 to flash these!
good summary sn00x. you should post this on the wiki as well.
tthank u very much for the information. it is a bit clearer for me now
Excellent summary for the beginner! Vielen Dank!
Please also read Quentin-'s Hermes Upgrading Guide for a detailed description of the upgrade process and information about ExtendedROM cooking.
it should be posted in the wiki
cristal clear now.... I had posted a question in another thread and read a lot of forums without success. Now I know for sure that have to wait... any ideas on how much time.. thanks for all the help!!!
Super CID
When one upgrades a Radio ROM is it necessary to go back and make the device Super CID again, or is it sticky.
The reason for this question is that I down graded to bl 1.04, made my device Super CID as it was never simlocked, and then upgraded my Radio to 1.27. My device returned a QTEK code, so I just ran Super CID again. It now again displays Super CID.
Is that the way it works?
Thanks for your posting - it certainly has taught me a lot!
@basilrsa: To make SuperCID sticky you need to run Herm_Unlock_v2a.exe on your phone while it has the patched radio that shows SuperCID. Otherwise it is lost after radio upgrades.
Thanks again pof
pof said:
@basilrsa: To make SuperCID sticky you need to run Herm_Unlock_v2a.exe on your phone while it has the patched radio that shows SuperCID. Otherwise it is lost after radio upgrades.
Click to expand...
Click to collapse
Thanks pof for that information. That's what I figured out so I reflashed the patched radio,reran Herm_Unlock_v2a.exe and then flashed the 1.27 radio.
Just to be sure I reran the Herm_Unlock_v2a.exe.
I guess that should be OK
Has this been put into the wiki? Someone please do the honours and report back with a roger wilco.
V
bl1.04
Gentlemen,
Quentin wrote:
"Even with the Super CID hack you cannot install a different radio
if your ROM installed BootLoader 1.06 or greater."
If my current machine state is
1. "Sticky" superCID has been accomplished.
2. Task 32 verifies the device is in superCID mode.
3. Bootloader page displays 1.04
does it stay that way for good regardless of what I flash? If I flash a rom which carries bl1.09 what is the bootloader version going to read on the device at the completion of the flash process?
If I make this simple and go buy a IMEI-check unlock to superCID my bl1.09 system will the bootloader page change to read bl1.04 and will it stay that way regardless of what I flash?
Is bl1.04 going to stay put with subsiquent rom loads?
Thanks
pof said:
@basilrsa: To make SuperCID sticky you need to run Herm_Unlock_v2a.exe on your phone while it has the patched radio that shows SuperCID. Otherwise it is lost after radio upgrades.
Click to expand...
Click to collapse
Hi, I am quite new with all this things. I just upgraded my radio to 1.27.00.00, does it mean, that my phone is CID locked again (I unlocked it together with SIM unlock).
How do I find oud, whther the phone is SuperCID or not. Thnax a lot
zzzp said:
Hi, I am quite new with all this things. I just upgraded my radio to 1.27.00.00, does it mean, that my phone is CID locked again (I unlocked it together with SIM unlock).
How do I find oud, whther the phone is SuperCID or not. Thnax a lot
Click to expand...
Click to collapse
Read the WIKI first... it tells you to issue 'info 2' command in bootloader.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
Seriously, if you've CID unlocked and radio flashed your Hermes without reading this far you're probably going to brick your phone sometime soon, so it'll pay to do some more reading before you play too much more.
1.04 vs 1.06 vs 1.09
I've been "burning eyelashes" for the last few days, my Firefox tabs seems like a huge cargo train
One thing i never could understand of all the readings i've made is about the functional advantages on the various bootloaders . Let me explain:
I know 1.04 is the only one that allows radio-only flashes but let's forget all flashing. Let's concentrate on everyday's use.
Does anyone know if 1.06 and 1.09 will make the PDA run better? I mean, if there's a newer ROM that brings bug corrections and new features so i guess that's the same for bootloaders. In this line of thinking 1.09 should do something better than 1.04. If so what is it?
Why i'm making this question? It's because everyone wants to have the best software version for himself uses, so i don't understand why people improve on ROM's, ExtROM and radios but keep a lower version of the bootloader after flashing. Aren't they missing something using 1.04 instead of 1.09?
I have my TyTN only for a week now and i'm looking forward to do things right by reading all that i need to know. So far this is the question that i haven't seen answered.
Cheers everyone,
Evandro
Well...I'm no expert but I'd imagine that you're venturing down the wrong path. I would venture a guess that many of the bootloader revisions have been made solely to enforce increased security or to attempt to prevent hacking or modding of the underlying OS and Radio ROMs.
That was a really great summary and guide. Unfortunately from all the threads and Wikis I have been reading I feel like alot has been changing very fast and I don't fully understand. This guide was great, and I was wondering if the author or anyone else (there are a bunch of guys on here who really know what they are doing) could write an updated (mabey even more detailed/technical) version. I know how to do all the flashing and stuff, but I'm not so confident I know how it's all working, especially the more recent stuff. Mabey including how stuff like the SSPL, hard SPL, mtty, KITL, nbh/nbs, and other more technical methods being used now other than the standard RUUs.
I know almost all of this info is in the forums and the wikis, but it's a little rough to grasp it all when not together. I hope this doesn't upset anyone, I just figured Quentin was gracious enough to do it once mabey he or someone else would want to do it again. If it's too much to ask then just ignore my request. I have been reading the forums for a few months now and think you guys are doing amazing work. You have improved in weeks what it takes MS to build in years and you do it much better. Thank to all and sorry again if I offended anyone by asking this (just really scared to brick my really expensive phone ...lol)
Thanks
Bootloader 1.09 ... no problem!
sn00x said:
Bootloader
Versions
1.04
There is a bug in bootloader 1.04 wich allows you to flash any ROM without a CID check. You have to be in bootloader mode to use this bug.
It's possible to upgrade the RadioROM. You can even flash a patched RadioROM wich is needed to unlock your device.
[*]1.06
The bug from version 1.04 is fixed. Without downgrading to a Shipped ROM with bootloader 1.04 that matches your CID it's not possible to flash a ROM with a different CID.
The RadioROM can't be upgraded. You have to downgrade to bootloader 1.04 to unlock your device.
[*]1.09
You can't downgrade to bootloader 1.04 by flashing a Shipped ROM. However imei-check.co.uk is able to downgrade the bootloader.
There was a solution posted on this forum, but it was stolen from imei-check and was removed. If you are not willing to pay you have to wait until another solution is developed.
The RadioROM can't be upgraded. You have to downgrade to bootloader 1.04 to unlock your device.
Click to expand...
Click to collapse
I think first pages should be updated since the issue regarding 1.09 has been resolved here by the great pof:
http://pof.eslack.org/hermes-unlocker/
http://forum.xda-developers.com/showthread.php?t=293665
Regards
good job..
I am a newbie here, and I read all the articles on upgrading, but am still confused.
I used SIM/CID Unlocker v3 to superCID my 8525. My bootloader version is SPL-1.06.
I have 2 questions:
If I were to upgrade my ROM to AKU3.3, Do I just need to run RUU_HER_CINGULAR_2.06.502.3_1.34..SPL1.04.exe with my phone connected to my XP box via activesync? Or do I first need to downgrade my bootloader to 1.04.
If I want to flash just the radio to 1.27.00, can I run "RUU_Hermes_TMD-TMA_Radiopatch_1.27.00.00_107_GER.exe" without downgrading my bootloader?
Thanks in advance for any help. And before I get flamed, I did read the WIKI.
yes, and yes.
But rather get the XDA Live ROM, and radio 1.34
My Hermes is still showing No GSM. Please inform me if I got something wrong.
I have tried to upgrade the radio rom from SPL-1.40:
http://forum.xda-developers.com/showpost.php?p=1321011&postcount=1337
That's wrong because HERM_Radinly_1.41.00.10_CustomRUU should be upgrade from SPL-1.04, right?
Because I have stuck on the tricolor screen, so I need to re-upgrade from HERM_Radinly_1.41.00.10_CustomRUU with the same choice of bootloader, right?
And then, I have succesfully upgraded to 1.41.00.10, but also showing No GSM, and the SPL is upgraded to 2.10 olipro after by using HardSPL V7.
And I can see "Upgrade instructions
Just download and execute these to upgrade; however it is recommended that users install HardSPL before flashing these radios.
" in http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms, then...I thought that I have doing right to upgrade the radio rom to 1.43.00.00.
Yes, I have upgraded to 1.43.00.00, but my Hermes is still showing No GSM. So I found from wiki, I found http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick, in the first line of the table, yes, I can boot the OS and no GSM, so I flash Hard SPL and update the rom from 1.43.00.00 to 1.40.30.00, but it showing No GSM also.
Then, I tried 1.07.03.10, no GSM also.
After that, I found I have missed a important sentance, "You can now do radio only upgrades in Bootloaders other than SPL 1.04.". Then, I try to found how can I downgrade SPL from 2.10 to 1.04. Thanks for Martinhdk and shogunmark, http://forum.xda-developers.com/showthread.php?p=1330247#post1330247.
down to 1.10 by choosing bootloader, not success....
after use Force by SSPL, success!!
and then down to 1.04 by choosing bootloader, not success....
first time not success when using SSPL....
second time also....
down to 1.04 by chooing bootloader again....not success
down to 1.04 by chooing bootloader and Hard-SPL....success!!!
Now...not HardSPL anymore!!!!
Then, I downgraded SPL to 1.04 successfully, checked by mtty also. Then, I can start to fix No GSM finally.
And then upgrade to 1.40.30.00 by method of RUU
but I can remember that, Upgrade instructions
Just download and execute these to upgrade; however it is recommended that users install HardSPL before flashing these radios.
install HardSPL V7, and then now is SPL-2.10.Olipro
After that, run HERM_Radinly_1.40.30.00_CustomRUU, choosing SSPL or bootloader version, failured sever times
When choosing the HardSPL and bootloader version SPL-2.10 in the second time....success!! But it is still showing No GSM.....
and... the PPC always cannot detect the USB connection....
What shoud I do now?
Do I made a big confuse on the concept of upgrading?
Please give me a small tip.....I really read many and many threads but....
I just want to use my PPC normally.....
I can see that you have certainly been searching the forums so hopefully others more knowldegable than me will help - rather than tell you to look even more as they so often do here on this site when the problem is simply inexperience for most of us.
In the meantime have you tried following the "No GSM" instructions on the Hermes Wiki here: http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5? It looks like this will need even more reading but hopefully it will help. I am afraid I am not familiar with this procedure but others should be able to offer support.
I must admit I thought HardSPL was OK for all radio upgrades - but perhaps you have read more than me.
Good luck
I've read around the forum and wiki, and it is not clear to me the requirements of upgrading only the radio. My questions are:
1. I have a cing/Att 8525, running the latest WM5 release by att/htc from htc's att site; My phone has not been sim / cid unlocked. Can I upgrade my radio only without unlocking the phone? I upgraded to the official ATT WM6 release from this site, but I lost sync functionality for Microsoft Money for PPC; this is 90% of the reason I bought the phone in the first place, so I'm going to go back to the WM5 release. However, the 1.48 radio in the WM6 release gives me better reception. So, can I upgrade the radio only in the wm5 release w/o unlocking the phone (which is still under warranty)?
2. If the answer to 1 is yes, the second question is that if I clear storage and reformat the phone sometime in the future for warranty purposes, will the radio revert to the WM5 version?
Thanks in advance!
Yes you can flash the radio ROM only. Have a look at the wiki for instructions and download links to extracted radio ROMs (including 1.48). You do not need to unlock your device but installing Hard-SPL first is a very good idea if you want to avoid having to make a call on your warranty.
Yes you can downgrade by flashing over another radio - provided that it (like 1.48) uses radio bootloader 0108. If it uses an older bootloader version you will not be able to downgrade at all. You can check which bootloader version is in use on the wiki page listing radio roms. However, I wouldn't worry about it for two reasons: 1) if you can't downgrade you are stuck on 1.48 now anyway (anothe reason you ought to have Hard SPL installed as a failed downgrade may brick your device); and 2) virtually all official recent WM5 updates will include a radio sufficiently new that it uses bootloader 0108.
U R The Man....
I had read and read and read, and finally stepped out on a limb and did exactly that (hardsplv7, and radio rom 1.50) Prior to reading your response. but you actually answered my remaining question, concerning my warranty. I greatly appreciate your response.
ma499 said:
Yes you can flash the radio ROM only. Have a look at the wiki for instructions and download links to extracted radio ROMs (including 1.48). You do not need to unlock your device but installing Hard-SPL first is a very good idea if you want to avoid having to make a call on your warranty.
Yes you can downgrade by flashing over another radio - provided that it (like 1.48) uses radio bootloader 0108. If it uses an older bootloader version you will not be able to downgrade at all. You can check which bootloader version is in use on the wiki page listing radio roms. However, I wouldn't worry about it for two reasons: 1) if you can't downgrade you are stuck on 1.48 now anyway (anothe reason you ought to have Hard SPL installed as a failed downgrade may brick your device); and 2) virtually all official recent WM5 updates will include a radio sufficiently new that it uses bootloader 0108.
Click to expand...
Click to collapse
But if you follow Mrvanx's guide to downgrade the SPL to match your radio version, this should also work not so?
The "radio bootloader" is part of the Radio ROM image, and completely separate from the main SPL bootloader. Once you are on a Radio ROM that uses radio bootloader 0108 you can't downgrade to an older radio bootloader version.
See here for a more detailed discussion:
http://forum.xda-developers.com/showpost.php?p=1114233&postcount=2
ma499 said:
The "radio bootloader" is part of the Radio ROM image, and completely separate from the main SPL bootloader. Once you are on a Radio ROM that uses radio bootloader 0108 you can't downgrade to an older radio bootloader version.
See here for a more detailed discussion:
http://forum.xda-developers.com/showpost.php?p=1114233&postcount=2
Click to expand...
Click to collapse
Ahhh, ok sorry, i got a bit confused between the bootloaders.
Thanks for the reminder ma499. Really appreciate it!
Regards.
I have been reading all across the forums how to CID unlock, upgrade etc. However, I am not able to find the ways to do seeminly essential homework before trying to upgrade. These for me are:-
* Finding a way to completely backup all the stuff from original tytn. Like ROM, SPL, IPL, Radio, CIDlock etc. I feel that this is important as if ever I feel like going to the tried old one I should be able to and to preserve the warranty also. Also, the method to roll back if needed. This should be covering re CID locking the phone etc.
It makes sense to create a way to bring the phone to its completlely original shape if we need it
Thanks
Alber
alber786 said:
I have been reading all across the forums how to CID unlock, upgrade etc. However, I am not able to find the ways to do seeminly essential homework before trying to upgrade. These for me are:-
* Finding a way to completely backup all the stuff from original tytn. Like ROM, SPL, IPL, Radio, CIDlock etc. I feel that this is important as if ever I feel like going to the tried old one I should be able to and to preserve the warranty also. Also, the method to roll back if needed. This should be covering re CID locking the phone etc.
It makes sense to create a way to bring the phone to its completlely original shape if we need it
Thanks
Alber
Click to expand...
Click to collapse
You do not need to back up your spl, ipl, etc. because if you need to roll back you can just reflash them on, and they can be found around here and in the wiki.
You cannot un-CIDunlock, but if you use hardspl v7 it will "trick" your phone into thinking it is (when in reality it isnt) so that you do not have to actually unlock it. If you ever need to send it in you can just flash the old spl over it.
mcorrie1121 said:
You do not need to back up your spl, ipl, etc. because if you need to roll back you can just reflash them on, and they can be found around here and in the wiki.
You cannot un-CIDunlock, but if you use hardspl v7 it will "trick" your phone into thinking it is (when in reality it isnt) so that you do not have to actually unlock it. If you ever need to send it in you can just flash the old spl over it.
Click to expand...
Click to collapse
So you mean that hardspl doesnt CID unlock it? But isnt there really a way to extract the original components and then put them back again ?
thanks
Alber
alber786 said:
So you mean that hardspl doesnt CID unlock it? But isnt there really a way to extract the original components and then put them back again ?
thanks
Alber
Click to expand...
Click to collapse
HardSPL does not CID unlock. pof's Free Unlocker (a sticky thread) does the SIM and CID unlocking. HardSPL is a new set of bootloaders allowing upgrade utilities to access and read/write to the phone. The most important aspect of this (besides bypassing the CID check) is the security - it has some overwrite protection built in to prevent you from accidentally corrupting the bootloader area, rendering your phone a brick. HardSPL is a safety measure.
If you check THE WIKI here on xda for the Hermes, you will find some stuff on extracting. It is most probable that it will be FAR easier to find new versions of everything you have, rather than trying to back up and restore. The wiki contains MANY shipped ROMs to allow you to restore back to basically the original condition. LOOK HERE for MW5 shipped ROMs and LOOK HERE for WM6 shipped ROMs.
todd_jg said:
HardSPL does not CID unlock. pof's Free Unlocker (a sticky thread) does the SIM and CID unlocking. HardSPL is a new set of bootloaders allowing upgrade utilities to access and read/write to the phone. The most important aspect of this (besides bypassing the CID check) is the security - it has some overwrite protection built in to prevent you from accidentally corrupting the bootloader area, rendering your phone a brick. HardSPL is a safety measure.
If you check THE WIKI here on xda for the Hermes, you will find some stuff on extracting. It is most probable that it will be FAR easier to find new versions of everything you have, rather than trying to back up and restore. The wiki contains MANY shipped ROMs to allow you to restore back to basically the original condition. LOOK HERE for MW5 shipped ROMs and LOOK HERE for WM6 shipped ROMs.
Click to expand...
Click to collapse
what about the radio upgrade
the htc108 thing
its confusing
on pof's sticky it says to downgrade the radio if u have the htc 108..
but on the radio upgrade sticky, it says u can upgrade any phone[hermes] using custom ruu..
todd_jg said:
HardSPL does not CID unlock. pof's Free Unlocker (a sticky thread) does the SIM and CID unlocking. HardSPL is a new set of bootloaders allowing upgrade utilities to access and read/write to the phone. The most important aspect of this (besides bypassing the CID check) is the security - it has some overwrite protection built in to prevent you from accidentally corrupting the bootloader area, rendering your phone a brick. HardSPL is a safety measure.
If you check THE WIKI here on xda for the Hermes, you will find some stuff on extracting. It is most probable that it will be FAR easier to find new versions of everything you have, rather than trying to back up and restore. The wiki contains MANY shipped ROMs to allow you to restore back to basically the original condition. LOOK HERE for MW5 shipped ROMs and LOOK HERE for WM6 shipped ROMs.
Click to expand...
Click to collapse
Thanks a lot for the reply, I appreciate the time you spent in expaining this to me and providing these links.
I was wondering if HARDSPL is like shelltool where it will only allow upgrade or flashing of OS part. So, once I use the HARDSPL and flash say HTC official WM6 release or Dopod WM6, will I be ableto to get the bundled radio and SPL and IPL upgrades from these ROMS? and if yes then will HARDSPL get replaced by these SPLs and IPLs built into the ROMS? One more thing, will an upgrade like that can brick the phone as if I rum the official ROM it will try to upgrade the SPL and IPL (I am not sure).
What is the preferred way of upgrading ? unlocking CID by the tool or HARDSPL ?
I have read somewhere that lockwiz tool used for Wizard can save CID also and some tool and put it back also but I dont know how and if the same tool can do it for hermes?
Regards,
Alber
alber786 said:
Thanks a lot for the reply, I appreciate the time you spent in expaining this to me and providing these links.
I was wondering if HARDSPL is like shelltool where it will only allow upgrade or flashing of OS part. So, once I use the HARDSPL and flash say HTC official WM6 release or Dopod WM6, will I be ableto to get the bundled radio and SPL and IPL upgrades from these ROMS? and if yes then will HARDSPL get replaced by these SPLs and IPLs built into the ROMS? One more thing, will an upgrade like that can brick the phone as if I rum the official ROM it will try to upgrade the SPL and IPL (I am not sure).
What is the preferred way of upgrading ? unlocking CID by the tool or HARDSPL ?
I have read somewhere that lockwiz tool used for Wizard can save CID also and some tool and put it back also but I dont know how and if the same tool can do it for hermes?
Regards,
Alber
Click to expand...
Click to collapse
Most cooked roms are os only, but a few have a radio, etc. included. If its os only, flashing will only change the os. You can separately flash radio.
Hardspl is the best because its reversible. Well thats not the best word to describe it....id say because its not permanent. But u know what i mean
alber786 said:
Thanks a lot for the reply, I appreciate the time you spent in expaining this to me and providing these links.
I was wondering if HARDSPL is like shelltool where it will only allow upgrade or flashing of OS part. So, once I use the HARDSPL and flash say HTC official WM6 release or Dopod WM6, will I be ableto to get the bundled radio and SPL and IPL upgrades from these ROMS? and if yes then will HARDSPL get replaced by these SPLs and IPLs built into the ROMS? One more thing, will an upgrade like that can brick the phone as if I rum the official ROM it will try to upgrade the SPL and IPL (I am not sure).
What is the preferred way of upgrading ? unlocking CID by the tool or HARDSPL ?
I have read somewhere that lockwiz tool used for Wizard can save CID also and some tool and put it back also but I dont know how and if the same tool can do it for hermes?
Regards,
Alber
Click to expand...
Click to collapse
Mcorrie1121 is right. I will add a couple of things.
1. HardSPL is not *necessary* for flashing anything, it only makes it safer and allows you to flash ROMs with CIDs that do not match your device without CID unlocking. Your ROM is basically a few parts - OS, Radio, IPL, SPL, ExtROM, MainSplash and SubSplash. The HardSPL will replace the SPL only. Most non-carrier ROM releases are OS only. Most carrier ROMs (as you pointed out) have ALL of these things. As Mcorrie1121 pointed out, you can easily find a radio - check the wiki, search, etc.
2. Once you have upgraded to a cooked ROM (and HardSPL), you will still be able to upgrade to a Shipped Official ROM. You may need to "unpack" it and use the CustomRUU instead of the shipped updater. That is OK though.
3. HardSPL will not allow overwriting of the IPL/SPL except by another HardSPL (see mrvanx.org downgrade guides). You will not have a problem. It will keep your bootloader zone safe.
4. I don't think there is a preferred way. Some people unlock CID, others do not. There is no reason to *not* unlock it, unless you plan to send it back - and I have never heard of someone getting service rejected for this reason. Wring ROM, yes. CID unlocked, no. That said, maybe try without CID unlocking first and then if you find you need to do it for some reason, then do it. You really do not have to do it, since the Custom Updater bypasses the CID check anyway.
5. Regarding the 0108 Radio BL issue, don't worry much about that - it is an old problem. Just don't go below whatever version you have now.
todd_jg said:
Mcorrie1121 is right. I will add a couple of things.
1. HardSPL is not *necessary* for flashing anything, it only makes it safer and allows you to flash ROMs with CIDs that do not match your device without CID unlocking. Your ROM is basically a few parts - OS, Radio, IPL, SPL, ExtROM, MainSplash and SubSplash. The HardSPL will replace the SPL only. Most non-carrier ROM releases are OS only. Most carrier ROMs (as you pointed out) have ALL of these things. As Mcorrie1121 pointed out, you can easily find a radio - check the wiki, search, etc.
2. Once you have upgraded to a cooked ROM (and HardSPL), you will still be able to upgrade to a Shipped Official ROM. You may need to "unpack" it and use the CustomRUU instead of the shipped updater. That is OK though.
3. HardSPL will not allow overwriting of the IPL/SPL except by another HardSPL (see mrvanx.org downgrade guides). You will not have a problem. It will keep your bootloader zone safe.
4. I don't think there is a preferred way. Some people unlock CID, others do not. There is no reason to *not* unlock it, unless you plan to send it back - and I have never heard of someone getting service rejected for this reason. Wring ROM, yes. CID unlocked, no. That said, maybe try without CID unlocking first and then if you find you need to do it for some reason, then do it. You really do not have to do it, since the Custom Updater bypasses the CID check anyway.
5. Regarding the 0108 Radio BL issue, don't worry much about that - it is an old problem. Just don't go below whatever version you have now.
Click to expand...
Click to collapse
Thanks, I appreciate your help. Please tell me if I can put back WM5 back on it after upgrading.
Regards,
Alber
todd_jg said:
Mcorrie1121 is right. I will add a couple of things.
1. HardSPL is not *necessary* for flashing anything, it only makes it safer and allows you to flash ROMs with CIDs that do not match your device without CID unlocking. Your ROM is basically a few parts - OS, Radio, IPL, SPL, ExtROM, MainSplash and SubSplash. The HardSPL will replace the SPL only. Most non-carrier ROM releases are OS only. Most carrier ROMs (as you pointed out) have ALL of these things. As Mcorrie1121 pointed out, you can easily find a radio - check the wiki, search, etc.
2. Once you have upgraded to a cooked ROM (and HardSPL), you will still be able to upgrade to a Shipped Official ROM. You may need to "unpack" it and use the CustomRUU instead of the shipped updater. That is OK though.
3. HardSPL will not allow overwriting of the IPL/SPL except by another HardSPL (see mrvanx.org downgrade guides). You will not have a problem. It will keep your bootloader zone safe.
4. I don't think there is a preferred way. Some people unlock CID, others do not. There is no reason to *not* unlock it, unless you plan to send it back - and I have never heard of someone getting service rejected for this reason. Wring ROM, yes. CID unlocked, no. That said, maybe try without CID unlocking first and then if you find you need to do it for some reason, then do it. You really do not have to do it, since the Custom Updater bypasses the CID check anyway.
5. Regarding the 0108 Radio BL issue, don't worry much about that - it is an old problem. Just don't go below whatever version you have now.
Click to expand...
Click to collapse
Dear, please help me with one thing-I am terribly confused about the procedure to upgrade my JASJAM to WM6. I understand that one way is to CIS unlock it and install on it the official and dopod releases of WM6. I wanted to know how can I do the same using the HARDspl. I know that I can install the HARDSPL but after that what ??? Can I then run the offcial RUU from HTC or Dopod or I am supposed to do it some other way as I am afraid that it may contain the SPL and IPL and can break by phone OR I have to use some customRUU (I dont know) OR I am supposed to extract the OS from these official releases (I dont know how) OR ..
Can you please clear these confusion??
I have:-
* I-Mate JASJAM, CID locked i suppose as when I run official HTC or dopod it says this update utility is not for this
*I really wanted to save my devices complete state and a way to revert it to the way it was like SPL, IPL, OS, Radio, CID lock etc.
PLS pls help
Regards,
Alber
alber786 said:
Dear, please help me with one thing-I am terribly confused about the procedure to upgrade my JASJAM to WM6. I understand that one way is to CIS unlock it and install on it the official and dopod releases of WM6. I wanted to know how can I do the same using the HARDspl. I know that I can install the HARDSPL but after that what ??? Can I then run the offcial RUU from HTC or Dopod or I am supposed to do it some other way as I am afraid that it may contain the SPL and IPL and can break by phone OR I have to use some customRUU (I dont know) OR I am supposed to extract the OS from these official releases (I dont know how) OR ..
Can you please clear these confusion??
I have:-
* I-Mate JASJAM, CID locked i suppose as when I run official HTC or dopod it says this update utility is not for this
*I really wanted to save my devices complete state and a way to revert it to the way it was like SPL, IPL, OS, Radio, CID lock etc.
PLS pls help
Regards,
Alber
Click to expand...
Click to collapse
CLICK THIS LINK
There are upgrade guides there and guides to put it back the way it was (OS, Radio, IPL, SPL, MainSplash and SubSplash) - it is all covered.
The upgrade guides will get you through the upgrade process. The only thing you need to do after that to use an official upgrade is to unrar (using winrar or something) the executable file and take the nbh and us it with the CustomRUU, which can be found HERE .