Related
please tell me am i flashed my jamin the right way.first i press camera and reset button to enter bootloader mode then i connect usb and then start g3 rom upgrade utility same in a folder contain nk.nbf file and wait till 100%. then hardreset all is done. i did all that and my jamin is working file with new windows. is that way right. thanks all .sorry for my bad english
fast666 said:
please tell me am i flashed my jamin the right way.first i press camera and reset button to enter bootloader mode then i connect usb and then start g3 rom upgrade utility same in a folder contain nk.nbf file and wait till 100%. then hardreset all is done. i did all that and my jamin is working file with new windows. is that way right. thanks all .sorry for my bad english
Click to expand...
Click to collapse
If your Prophet is working with the new ROM, it appearrantly succeeded. No need to worry....
Keep in mind that there are hunderds of postings each day on this forum. Please don't start new threads if there isn't any real need for it. That way this crowded forum will stay at least a bit readable... THANKS!
Take a look....
first i tride to but another rom in my pocket (htc touch dual) then i follow the steps put the screen kept in color screen (bootloder) >>>
i try to format but it steel there and write in it :
NIKI100
SPL-1.17.0000
CPLD-4
please help me
you cold try hard reset:
power off
hold call+call disconnect buttons together, then while holding these press power on button.
but, i'd wait until someone whose tried flashing roms confirms this will reset back to original touch dual rom, as i havent tried flashing as of yet
Download MTTY and use Command "boot" if it doesnt work ... please tell us what you have done???
Why nobody cant use the search function and why on earth it is impossible to tell, what was the last thing you have try to get this error!!!
If you have get your OS back ... please dump your SPL and share it with me, for future development!
badaas said:
you cold try hard reset:
power off
hold call+call disconnect buttons together, then while holding these press power on button.
but, i'd wait until someone whose tried flashing roms confirms this will reset back to original touch dual rom, as i havent tried flashing as of yet
Click to expand...
Click to collapse
thamks but it not works
NetrunnerAT said:
Download MTTY and use Command "boot" if it doesnt work ... please tell us what you have done???
Why nobody cant use the search function and why on earth it is impossible to tell, what was the last thing you have try to get this error!!!
If you have get your OS back ... please dump your SPL and share it with me, for future development!
Click to expand...
Click to collapse
from where can i Download MTTY ??
here you are..
sackbauer said:
here you are..
Click to expand...
Click to collapse
thank you alot
but how to use it ????
i'm still waiting
hä? what do you mean - you want this tool but do not know how to use it ! for what reason do you want this tool then ?
disable active sync
connect phone trough usb and start program.
any more help -> try search function
i am off
sackbauer said:
hä? what do you mean - you want this tool but do not know how to use it ! for what reason do you want this tool then ?
disable active sync
connect phone trough usb and start program.
any more help -> try search function
i am off
Click to expand...
Click to collapse
thank you for helping
dont be engry from me becose i dont know how to use the program ..
i just want to end my proplem
NetrunnerAT said:
Download MTTY and use Command "boot" if it doesnt work ...
Click to expand...
Click to collapse
Make sure that right after you ENTER on the "boot" command you DISCONNECT the USB cable. That worked for me. Now I'm sporting the WWE ASIA rom.
aiondennis9000 said:
Make sure that right after you ENTER on the "boot" command you DISCONNECT the USB cable. That worked for me. Now I'm sporting the WWE ASIA rom.
Click to expand...
Click to collapse
thank you
all works but whene i update to wwe asia rom its stoped in 1% then my phone come in black screen then return back color screen bootlodere
do you know whats the problem ??
falojjah said:
thank you
all works but whene i update to wwe asia rom its stoped in 1% then my phone come in black screen then return back color screen bootlodere
do you know whats the problem ??
Click to expand...
Click to collapse
Basicly I did the following:
After recovering from the tri-color screen I did it according my own procedure to make sure it works:
1.) I placed the sspl-1.16-nike.exe on the Niki
2.) disconnect the USB
3.) Then renamed the hardspl-1.15mfg-nike.nbh to uspl-1.16-nike.nbh in the flash-uspl-niki folder
4.) run the sspl-1.16-nike.exe on the device
5.) connect the USB cable to device and desktop/laptop
6.) wait for it to say USB on the Niki
7.) flash the renamed uspl-1.16-nike.nbh with ROMUpdateUtility.exe from flash-uspl-niki
8.) ran the sspl-1.16-nike.exe on the Niki again
8.) and install the WWE ASIA rom afterwards.
Problem solved
ps: I stated 40 some hours of battery time compaired to the original T-mobile rom. Currently I am exceeding the 48hrs and have mad amount of batterylife to spare. Usage was 7% per 8,5hrs. You do the math. I am going to make 4 days with usage and 5 days would be without usage. I'll keep you posted.
falojjah said:
thank you
all works but whene i update to wwe asia rom its stoped in 1% then my phone come in black screen then return back color screen bootlodere
do you know whats the problem ??
Click to expand...
Click to collapse
please .... please!!
Read the hole Threads befor you do any thing!!!!!
Same Hacks are very complicate. If you dont wana read ... buy a normal Mobile Phone. I thing you dont want buy a 700us$ Phone and kick it one week later.
aiondennis9000 said:
Basicly I did the following:
After recovering from the tri-color screen I did it according my own procedure to make sure it works:
1.) I placed the sspl-1.16-nike.exe on the Niki
2.) disconnect the USB
3.) Then renamed the hardspl-1.15mfg-nike.nbh to uspl-1.16-nike.nbh in the flash-uspl-niki folder
4.) run the sspl-1.16-nike.exe on the device
5.) connect the USB cable to device and desktop/laptop
6.) wait for it to say USB on the Niki
7.) flash the renamed uspl-1.16-nike.nbh with ROMUpdateUtility.exe from flash-uspl-niki
8.) ran the sspl-1.16-nike.exe on the Niki again
8.) and install the WWE ASIA rom afterwards.
Problem solved
ps: I stated 40 some hours of battery time compaired to the original T-mobile rom. Currently I am exceeding the 48hrs and have mad amount of batterylife to spare. Usage was 7% per 8,5hrs. You do the math. I am going to make 4 days with usage and 5 days would be without usage. I'll keep you posted.
Click to expand...
Click to collapse
it works thanks alote
i dont beleve it
NetrunnerAT said:
please .... please!!
Read the hole Threads befor you do any thing!!!!!
Same Hacks are very complicate. If you dont wana read ... buy a normal Mobile Phone. I thing you dont want buy a 700us$ Phone and kick it one week later.
Click to expand...
Click to collapse
thank you for what you do for me
NetrunnerAT said:
please .... please!!
Read the hole Threads befor you do any thing!!!!!
Same Hacks are very complicate. If you dont wana read ... buy a normal Mobile Phone. I thing you dont want buy a 700us$ Phone and kick it one week later.
Click to expand...
Click to collapse
I read the whole thread before and I ended up as falojjah with a tri-color screen. My alternate procedure worked for me and now works for falojjah and all you can say is the above? pffff
falojjah said:
it works thanks alote
i dont beleve it
Click to expand...
Click to collapse
You're welcome buddy
Ooh and you might want to run TouchDual_FLO abnormal.exe just to be sure. It's on the HTC e-club download section.
aiondennis9000 said:
You're welcome buddy
Ooh and you might want to run TouchDual_FLO abnormal.exe just to be sure. It's on the HTC e-club download section.
Click to expand...
Click to collapse
Not all Roms need it!
Install it only, if you have a TouchFLO Problem. The most Roms have includ it!
NetrunnerAT said:
Not all Roms need it!
Install it only, if you have a TouchFLO Problem. The most Roms have includ it!
Click to expand...
Click to collapse
And to this downplay I say that it does make sense to install it because it clearly made Touchflo respond smoother and quicker on the WWE Asia rom. pfff
Guys i tried to upgrade my imate jasmin, to wm6 the problem was that it started to upgrade the rom but the process was interrupted, when i tried to turn it on again it does not pass the initial blue screen that gives the info of the rom. The active sync does not work because the PDA does not connect to the computer and doesn´t pass from the initial blue screen.
Is there anything you can do, or the PDA is to the trash.
Hope you can help thanks. http://forum.xda-developers.com/images/smilies/confused.gif
Which Rom
Which ROM you use?
well i used the rom that is the upgrade for wm6 that is on the portal, the one that is for prophet, but the upgrade didn´t reach the end and now the pda does not pass from the blue initial screen and it isn´t possible to achive any type of conection to the PC i don´t know what to do...
deltav13 said:
well i used the rom that is the upgrade for wm6 that is on the portal, the one that is for prophet, but the upgrade didn´t reach the end and now the pda does not pass from the blue initial screen and it isn´t possible to achive any type of conection to the PC i don´t know what to do...
Click to expand...
Click to collapse
Bro. Try the methode found in the sticky:
FLASHING TOOL For all nk.nbf (WM6.1), 3 color bootup? SOLUTIONS ... in
http://forum.xda-developers.com/showthread.php?t=353547
In ur case, although the connection seem disabled, we could still force the activesync to work for flashing. Just right click the activesync icon in lower right corner of ur pc, choose connection, force it to search the usb. retry once or twice if u r not sure, then try to reflash the rom while the activesync seem still searching for devices. If it won't start, then the better way is to follow the step from Dioxda2 above. If it started halfway as before mean u have to re download the rom with its all suitable methode such as Hardspl, jumpSpl etc.
This work on my Dopod 818pro while stucked on 3 colour bootloader screen. Hope it will work on ur case too. Good luck.
thanks bro, hope it works, i will tell you later if the pda is back online
deltav13 said:
thanks bro, hope it works, i will tell you later if the pda is back online
Click to expand...
Click to collapse
Hi again, bro. Any progress? Good luck.
Hi, my device version is i780BVGK3, i have download some flashing guide, but "hold down ENTER and FUNCTION keys'' doesn't work so mirage detect nothing ...
Also do i need do flash the russian roms and then some eng roms before flashing to wm 6.5 as is in that quide ???
(the function key is probably the black/white key for writing numbers ???)
Btw is there any other way to flash (sd card, other program)
And the official firmware updater also don't work, ask me to press ok to reset device and then .... try again, can't acess device
I really don't want that buggy WM6.0, help
Sekac79 said:
Hi, my device version is i780BVGK3, i have download some flashing guide, but "hold down ENTER and FUNCTION keys'' doesn't work so mirage detect nothing ...
Also do i need do flash the russian roms and then some eng roms before flashing to wm 6.5 as is in that quide ???
(the function key is probably the black/white key for writing numbers ???)
Btw is there any other way to flash (sd card, other program)
And the official firmware updater also don't work, ask me to press ok to reset device and then .... try again, can't acess device
I really don't want that buggy WM6.0, help
Click to expand...
Click to collapse
Question is quite a range to make an right answer.
Try to disable antivirus filrewalls on pc before trying to flash.
Firewall and antivirus disabled, still not working (official updater to wm6.1 - "timeout, try again") ... maybe windows7 problem ???
But the flashing by mirage, power on with pressed ENTER and ALT buttons also does nothing, phone boots normally and mirage doesn't detect
ALT button is that black/white for input numbers ?
I press them down and then power, hold everything together but nothing happens ...
Sekac79 said:
Firewall and antivirus disabled, still not working (official updater to wm6.1 - "timeout, try again") ... maybe windows7 problem ???
But the flashing by mirage, power on with pressed ENTER and ALT buttons also does nothing, phone boots normally and mirage doesn't detect
ALT button is that black/white for input numbers ?
I press them down and then power, hold everything together but nothing happens ...
Click to expand...
Click to collapse
Holding buttons then releasing "power", device going to power up, but keep other buttons pressed till boot screen appears. Yes win 7 is not supported, but you can manage it by some ways. Use XP or Vista.
still cannot acces boot screen, should be phone clean (hard reset) ?
sim and memory card removed, but no effect, phone hang for some time with SAMSUNG on screen, but then boot normally :/
Sekac79 said:
still cannot acces boot screen, should be phone clean (hard reset) ?
sim and memory card removed, but no effect, phone hang for some time with SAMSUNG on screen, but then boot normally :/
Click to expand...
Click to collapse
It must to enter loader mode this way or its not sgh-i780
Try to update via mirage updater on xp computer.http://forum.xda-developers.com/showpost.php?p=8154552&postcount=1117
Ok, the solution was to upgrade to the official wm6.1, after this the boot screen become accessible, before really NOT !
Now i am using your wm 6.5 final and it works (especially the mouse) like a charm, thank you for your advice and really good rom
Btw maybe you should mention somewhere in your flashing guide that if the boot screen is not accessible the official upgrade is required
windows 7 or XP?
Sekac79 said:
Ok, the solution was to upgrade to the official wm6.1, after this the boot screen become accessible, before really NOT !
Now i am using your wm 6.5 final and it works (especially the mouse) like a charm, thank you for your advice and really good rom
Btw maybe you should mention somewhere in your flashing guide that if the boot screen is not accessible the official upgrade is required
Click to expand...
Click to collapse
Hi, congratulation on your successful upgrade to winmo 6.5.
Did you finally able to do the upgrading with a windows 7 PC?
I only have a windows 7 PC, i wonder if i have to borrow an XP machine from a friend to do this.
Thanks..
blumedic said:
Hi, congratulation on your successful upgrade to winmo 6.5.
Did you finally able to do the upgrading with a windows 7 PC?
I only have a windows 7 PC, i wonder if i have to borrow an XP machine from a friend to do this.
Thanks..
Click to expand...
Click to collapse
Here is win7 64(32) bit flashing guide http://forum.xda-developers.com/showthread.php?p=4866182#post4866182
first methode mensioned on this post works very well. Only from myself I should to notice that you should load win7 in "test mode" to install attached drivers.
Personally im on win7 64 bit and using this driver.
I haven't try in win7, official wm6.1 upgrade doesn't work in win7 so i go to my "xp pc friend" and there made complete flashing - wm6.1 from samsung site and wm6.5 through mirage ...
Sekac79 said:
I haven't try in win7, official wm6.1 upgrade doesn't work in win7 so i go to my "xp pc friend" and there made complete flashing - wm6.1 from samsung site and wm6.5 through mirage ...
Click to expand...
Click to collapse
So then this is for you too
As title states trying to go back to stock but activesync not recognising my phone I have tried everything but nothing working. Since installing wp7.8 rom it doesn't get recognised and I do not know what else to do so any help would be greatly appreciated. Thanks
Well ...
david.wilson.1987 said:
As title states trying to go back to stock but activesync not recognising my phone I have tried everything but nothing working. Since installing wp7.8 rom it doesn't get recognised and I do not know what else to do so any help would be greatly appreciated. Thanks
Click to expand...
Click to collapse
Dear friend ... Would you please give more info ? ( if you had WPH 7.8 , you have HSPL which means you could have flashed WM in Bootloader so why didn't you flash the ROM there ? ) ... Thanks in advance
With Best Wishes
Hitman1376
hitman1376 said:
Dear friend ... Would you please give more info ? ( if you had WPH 7.8 , you have HSPL which means you could have flashed WM in Bootloader so why didn't you flash the ROM there ? ) ... Thanks in advance
With Best Wishes
Hitman1376
Click to expand...
Click to collapse
Yes I have hspl. I have tried everything, I hav magldr 1.12 so I cnt flas from sd, when I try n use usb flasher the updater can't find my device it has error code 262 which is activsync not recognising the device so I cannot think of another way to flash the rom. Im goin to try and use someone else computer incase its mine but until then trying to findanother method of doing it
??? ... but you can't flash WM on MAGLDR !!!!
david.wilson.1987 said:
Yes I have hspl. I have tried everything, I hav magldr 1.12 so I cnt flas from sd, when I try n use usb flasher the updater can't find my device it has error code 262 which is activsync not recognising the device so I cannot think of another way to flash the rom. Im goin to try and use someone else computer incase its mine but until then trying to findanother method of doing it
Click to expand...
Click to collapse
But remember that you can't flash WM using Magldr !!!!!!!!! .... well if now you have WM stock and you want to return to it , you should go to bootloader menu ( shut down and then hold "Vol Down + Power button" to get to the colorful menu then run Task29 than Run the WM installation ( NOTE : Remember that all bootloaders are flashed this way and if you flash the WM , your Magldr is ging to get removed !!! also remember that doing a Task29 is necessary to remove the bootloader you had before and if you don't do it , your installed bootloader will crush !!! ) .. Goodluck
With Best Wishes
Hitman1376
hitman1376 said:
But remember that you can't flash WM using Magldr !!!!!!!!! .... well if now you have WM stock and you want to return to it , you should go to bootloader menu ( shut down and then hold "Vol Down + Power button" to get to the colorful menu then run Task29 than Run the WM installation ( NOTE : Remember that all bootloaders are flashed this way and if you flash the WM , your Magldr is ging to get removed !!! also remember that doing a Task29 is necessary to remove the bootloader you had before and if you don't do it , your installed bootloader will crush !!! ) .. Goodluck
With Best Wishes
Hitman1376
Click to expand...
Click to collapse
What is task 29? If that is the stock rom then yes I have that I have also tried all of that on the 3 colour screen but it just doesnt do anything its recognising the usb on the coloured screen but when I start the process nothing actually happens it gets stuck at 0%
Well ...
david.wilson.1987 said:
What is task 29? If that is the stock rom then yes I have that I have also tried all of that on the 3 colour screen but it just doesnt do anything its recognising the usb on the coloured screen but when I start the process nothing actually happens it gets stuck at 0%
Click to expand...
Click to collapse
Task29 is a flash able image which erases the data on the phone and makes it ready for flashing a new Bootloader (WM / MAGLDR / CLK ) ... That may be the 0% reason .... try doing a Task 29 ... I recommend you to try this App ( it has MAGLDR + CLK + Task29 ) ... Good luck
With Best Wishes
Hitman1376
eretrs that
hitman1376 said:
Task29 is a flash able image which erases the data on the phone and makes it ready for flashing a new Bootloader (WM / MAGLDR / CLK ) ... That may be the 0% reason .... try doing a Task 29 ... I recommend you to try this App ( it has MAGLDR + CLK + Task29 ) ... Good luck
With Best Wishes
Hitman1376
Click to expand...
Click to collapse
Hey thanks but I have just spent ages downloading and setting up that software to eventually get to video tutorial where I am then told that you still need activesync. As stated earlier my activesync is not working my phone is not being recognised on activesync and that is where my problem lies so please if you can help with that then good. Cause otherwise im wasting my time
I would reinstall activesync, turn off any antivirus software, especially if Norton.
Remove SD card, put device into bootloader manually *shut down and then hold "Vol Down + Power button* then connect to usb cable & try flashing standard wm6.5 rom.
Activesync download & general tips & tools can all be found in HD2 Wiki.
http://forum.xda-developers.com/wiki/HTC_HD2
Mister B said:
I would reinstall activesync, turn off any antivirus software, especially if Norton.
Remove SD card, put device into bootloader manually *shut down and then hold "Vol Down + Power button* then connect to usb cable & try flashing standard wm6.5 rom.
Activesync download & general tips & tools can all be found in HD2 Wiki.
http://forum.xda-developers.com/wiki/HTC_HD2
Click to expand...
Click to collapse
I have done the uninstall and install of activesync but I haven't tried removing sd card so will try that again.if it doesn't work I will then try a newer computer and see if I can get it working through wmc instead.
I have tried everything that has been suggested. Task 29 also isnt working as it requires activesync dies not recognise device.
Thanks for trying to help everyone. I managed to sort it and it was the hspl had messed up I have sorted it amd now thats me in android so goodbye windows phone lol