Hi, my device version is i780BVGK3, i have download some flashing guide, but "hold down ENTER and FUNCTION keys'' doesn't work so mirage detect nothing ...
Also do i need do flash the russian roms and then some eng roms before flashing to wm 6.5 as is in that quide ???
(the function key is probably the black/white key for writing numbers ???)
Btw is there any other way to flash (sd card, other program)
And the official firmware updater also don't work, ask me to press ok to reset device and then .... try again, can't acess device
I really don't want that buggy WM6.0, help
Sekac79 said:
Hi, my device version is i780BVGK3, i have download some flashing guide, but "hold down ENTER and FUNCTION keys'' doesn't work so mirage detect nothing ...
Also do i need do flash the russian roms and then some eng roms before flashing to wm 6.5 as is in that quide ???
(the function key is probably the black/white key for writing numbers ???)
Btw is there any other way to flash (sd card, other program)
And the official firmware updater also don't work, ask me to press ok to reset device and then .... try again, can't acess device
I really don't want that buggy WM6.0, help
Click to expand...
Click to collapse
Question is quite a range to make an right answer.
Try to disable antivirus filrewalls on pc before trying to flash.
Firewall and antivirus disabled, still not working (official updater to wm6.1 - "timeout, try again") ... maybe windows7 problem ???
But the flashing by mirage, power on with pressed ENTER and ALT buttons also does nothing, phone boots normally and mirage doesn't detect
ALT button is that black/white for input numbers ?
I press them down and then power, hold everything together but nothing happens ...
Sekac79 said:
Firewall and antivirus disabled, still not working (official updater to wm6.1 - "timeout, try again") ... maybe windows7 problem ???
But the flashing by mirage, power on with pressed ENTER and ALT buttons also does nothing, phone boots normally and mirage doesn't detect
ALT button is that black/white for input numbers ?
I press them down and then power, hold everything together but nothing happens ...
Click to expand...
Click to collapse
Holding buttons then releasing "power", device going to power up, but keep other buttons pressed till boot screen appears. Yes win 7 is not supported, but you can manage it by some ways. Use XP or Vista.
still cannot acces boot screen, should be phone clean (hard reset) ?
sim and memory card removed, but no effect, phone hang for some time with SAMSUNG on screen, but then boot normally :/
Sekac79 said:
still cannot acces boot screen, should be phone clean (hard reset) ?
sim and memory card removed, but no effect, phone hang for some time with SAMSUNG on screen, but then boot normally :/
Click to expand...
Click to collapse
It must to enter loader mode this way or its not sgh-i780
Try to update via mirage updater on xp computer.http://forum.xda-developers.com/showpost.php?p=8154552&postcount=1117
Ok, the solution was to upgrade to the official wm6.1, after this the boot screen become accessible, before really NOT !
Now i am using your wm 6.5 final and it works (especially the mouse) like a charm, thank you for your advice and really good rom
Btw maybe you should mention somewhere in your flashing guide that if the boot screen is not accessible the official upgrade is required
windows 7 or XP?
Sekac79 said:
Ok, the solution was to upgrade to the official wm6.1, after this the boot screen become accessible, before really NOT !
Now i am using your wm 6.5 final and it works (especially the mouse) like a charm, thank you for your advice and really good rom
Btw maybe you should mention somewhere in your flashing guide that if the boot screen is not accessible the official upgrade is required
Click to expand...
Click to collapse
Hi, congratulation on your successful upgrade to winmo 6.5.
Did you finally able to do the upgrading with a windows 7 PC?
I only have a windows 7 PC, i wonder if i have to borrow an XP machine from a friend to do this.
Thanks..
blumedic said:
Hi, congratulation on your successful upgrade to winmo 6.5.
Did you finally able to do the upgrading with a windows 7 PC?
I only have a windows 7 PC, i wonder if i have to borrow an XP machine from a friend to do this.
Thanks..
Click to expand...
Click to collapse
Here is win7 64(32) bit flashing guide http://forum.xda-developers.com/showthread.php?p=4866182#post4866182
first methode mensioned on this post works very well. Only from myself I should to notice that you should load win7 in "test mode" to install attached drivers.
Personally im on win7 64 bit and using this driver.
I haven't try in win7, official wm6.1 upgrade doesn't work in win7 so i go to my "xp pc friend" and there made complete flashing - wm6.1 from samsung site and wm6.5 through mirage ...
Sekac79 said:
I haven't try in win7, official wm6.1 upgrade doesn't work in win7 so i go to my "xp pc friend" and there made complete flashing - wm6.1 from samsung site and wm6.5 through mirage ...
Click to expand...
Click to collapse
So then this is for you too
Related
Hi,
I just tryed to install MAGLDR111, i did have HSPL installed (no prob about that).
First i ran ROMUpdateUtility.exe as administrator, everything whas fine ...
At the beginning of the process of flashing MAGLDR111 to my device, i got
the screen with the red, green color (as usual when you flash HD2).
But then windows was trying to install Qualcomm driver, after a few sec, the install process of MAGLDR111 failed, but the Qualcomm driver succeed ... : (
The device stayed on the flasing screen.
Then i tryed to flash again MAGLDR111, and it succeeded !
But when i start my HD2 now i just have the energize boot screenshot (because i had energize WM ROM before ...)
nothing is happening ...... i plug the USB cable ... nothing is happening too (no OS booted on so ... )
PLEASE, GIVE ME A HAND !!
ps : sorry for my poor english
jediL said:
Hi,
I just tryed to install MAGLDR111, i did have HSPL installed (no prob about that).
First i ran ROMUpdateUtility.exe as administrator, everything whas fine ...
At the beginning of the process of flashing MAGLDR111 to my device, i got
the screen with the red, green color (as usual when you flash HD2).
But then windows was trying to install Qualcomm driver, after a few sec, the install process of MAGLDR111 failed, but the Qualcomm driver succeed ... : (
The device stayed on the flasing screen.
Then i tryed to flash again MAGLDR111, and it succeeded !
But when i start my HD2 now i just have the energize boot screenshot (because i had energize WM ROM before ...)
nothing is happening ...... i plug the USB cable ... nothing is happening too (no OS booted on so ... )
PLEASE, GIVE ME A HAND !!
Click to expand...
Click to collapse
ok
STOP BLAMING MAGLDR
Firstly your phone has not BRICKED..
Pres VOL down + reset
You will get the boot loader..
Flash a official Rom..
Good,
ok, i did press the volume down + reset.
I get the blue, red, green screen.
but i don't (think i get/see) the MAGLDR bootloader ( i don't see any option 4 ... as said on the tutorial).
should i reflash MAGLDR111 or just run DAF application via windows ?
Sorry about the name of the post : (. Didn't want to blame developpers, sry guys.
jediL said:
ok, i did press the volume down + reset.
I get the blue, red, green screen.
but i don't (think i get/see) the MAGLDR bootloader ( i don't see any option 4 ... as said on the tutorial).
should i reflash MAGLDR111 or just run DAF application via windows ?
Sorry about the name of the post : (. Didn't want to blame developpers, sry guys.
Click to expand...
Click to collapse
ok you have the tri colour screen,,, now first flash an official ROM ,
If the BOOTLOADER SAYS Cotulla HSPL, then u can install a CUSTOM rom too...
Then
Start the process all over again,
I just ran DAF application from DFT_Android folder, after wainting for USB i got an error message :
Error happen
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
Error Description: wait marker fails
Info: .\RSPL\BootLoader.cpp (225)
I'm downloading an official windows mobile ROM to install it now, i hope to have no trouble.
Thanks a lot for your help !
Official windows mobile ROM install succeeded.
I'm gonna try to start the process all over again ...
no no no dont flash official rom!
when powering up your device press end key, and magldr will appear.
Just keep pressing end key!
And if that doesn't work:
it means your hspl is outdated, so flash a new hspl.
This issue has already been reported on the MAGLDR thread, and those were the solutions, i think you needed hspl 2.08 if i'm not mistaken
I have the same problem, only I can't start the bootloader! What should I do?
Thanks Derek0228, my HSPL was outdated as you said.
I did Update it, then install MAGLDR111 and than flash the DFT android NAND build.
It's working very well !
(Thanks DFT !!)
problem solve : )
jediL said:
Thanks Derek0228, my HSPL was outdated as you said.
I did Update it, then install MAGLDR111 and than flash the DFT android NAND build.
It's working very well !
(Thanks DFT !!)
problem solve : )
Click to expand...
Click to collapse
You're welcome
Rushedby said:
I have the same problem, only I can't start the bootloader! What should I do?
Click to expand...
Click to collapse
When I restart my HD 2, it hang after "GO GO GO", I try to upload 3 different NAND source but still hang-up.
Please help me.
My HD2 cannot start bootloader too.
superguard said:
When I restart my HD 2, it hang after "GO GO GO", I try to upload 3 different NAND source but still hang-up.
Please help me.
My HD2 cannot start bootloader too.
Click to expand...
Click to collapse
Did you have the latest MagLdr 1.11.
yes, I have the latest MagLdr 1.11.
Until now, I can't start bootloader
My HD2: HTC HD2 (T8585)
Please anybody help me to resolve this problem, thank you
superguard said:
yes, I have the latest MagLdr 1.11.
Until now, I can't start bootloader
My HD2: HTC HD2 (T8585)
Click to expand...
Click to collapse
SD flash your WinMo O/S (except 3.14 ROM). Run HSPL2 to 2.08HSPL and make sure the RADIO is 2.08.50 or above. Then go through the Android flashing again - I would re-download the files, incase one is corrupt.
Flash a stock rom...
Sent from my HTC HD2 using XDA App
I can't run HSLP2 because my phone when start alway go directly to MagLdr menu. I try to press Vol Down + Power (or hard reset) but can not. My PC could not recognize the phone so can not run HSLP2.
And I also FLASHABLE USING CLOCKWORKMOD RECOVERY (http://forum.xda-developers.com/showthread.php?t=900478) but nothing change.
My phone: HD2 T8585
Magldr 1.11
superguard said:
I can't run HSLP2 because my phone when start alway go directly to MagLdr menu. I try to press Vol Down + Power (or hard reset) but can not. My PC could not recognize the phone so can not run HSLP2.
And I also FLASHABLE USING CLOCKWORKMOD RECOVERY (http://forum.xda-developers.com/showthread.php?t=900478) but nothing change.
My phone: HD2 T8585
Magldr 1.11
Click to expand...
Click to collapse
Try doing a hard reset - it should clear everything and then run HSPL to 2.08hspl and flash whatever you want MAgldr or WinRom ...
After downgrade to 6.5 with program downloader 4. When i use camera+ power i have white led and on screen i have white text : MOD fs_device. C 0248
This screen after 10-20 second turn of and led is red.
Please help.
bahni said:
After downgrade to 6.5 with program downloader 4. When i use camera+ power i have white led and on screen i have white text : MOD fs_device. C 0248
This screen after 10-20 second turn of and led is red.
Please help.
Click to expand...
Click to collapse
1.program downloader ? TG Downloader, yes? 2. which 6.5.x ROM as .bin you have flash? 3. what exactly you are planning, why use camera+ power key?
I use camera and power becouse only this combination do something with phone.
I flash bin Nokser rom.
i use program downloader 4 from nicola92 post.
it will just do this with noksers wm6.5.x rom
i also had the screen MOD fs_device. C 0248
just flash a different wm6.5.x rom or whatever other rom you want its just noksers rom that did this to me
How you upload rom? Becouse after 10 second screen turn off.
jonnyhall1bmx1 said:
just flash a different wm6.5.x rom or whatever other rom you want its just noksers rom that did this to me
Click to expand...
Click to collapse
After that, the phone displays a green light, vibrates and all. Now TG downloader doesn t even see the phone/
OK which ROM will it NOT do it with that will restore my phone as I have this problem as well. Please a link to a bin file would be excellent (So I don't have to convert it as I don't know how).
I have to say I feel a bit nervous about flashing something that doesn't have the 0321 radio, or shouldn't I be worried about that?
---------- Post added at 01:47 AM ---------- Previous post was at 01:45 AM ----------
propeller_nf88 said:
After that, the phone displays a green light, vibrates and all. Now TG downloader doesn t even see the phone/
Click to expand...
Click to collapse
Ah.. welcome to my world :-( Are you trying a bin file or a tsw file? (And why does it seem to work for some people and not for others??)
There MUST be something common here. Either people have different versions of phones OR we are all making the same mistake somewhere?
For example: I had to go into the device manager and manually update/reinstall the drivers for the wm6.5 bootloader drivers and the wp7 bootloader driver, as otherwise it wouldn't see the phone.
Also.. I'm flashing bin files. I figure the cable is fine as well as it seems to install the bootloader so I can flash, and the phone restarts when it should etc.
I was looking round for this MOD 248 thing, and the phone not booting, and it looks like back in October 'nyl' and a few others were getting this issue, yet still managed to recover there phones. So don't lose hope
I don't know why, but it seems like certain bin files work for some people but not for others? Very strange.
If anyone has some other bin files (WM6.5 AND WP7 that they know will work, please link to them )
Thanks!
Scougar said:
I was looking round for this MOD 248 thing, and the phone not booting, and it looks like back in October 'nyl' and a few others were getting this issue, yet still managed to recover there phones. So don't lose hope
I don't know why, but it seems like certain bin files work for some people but not for others? Very strange.
If anyone has some other bin files (WM6.5 AND WP7 that they know will work, please link to them )
Thanks!
Click to expand...
Click to collapse
hi, i don't know much over the qpst upgrade method- but few user here with same/similar issue (flash! although get a checksumm error!) have managed it succesfull ...........
Hey mirolog
Do you have a working link to your mirom8 wm6.5 build please? I assume I will need to change radio on it from 300 to 321 before I flash though as well?
I will try the QPST method if another rom doesn't solve my issue.
Scougar said:
Hey mirolog
Do you have a working link to your mirom8 wm6.5 build please? I assume I will need to change radio on it from 300 to 321 before I flash though as well?
I will try the QPST method if another rom doesn't solve my issue.
Click to expand...
Click to collapse
hi Scougar
miRom 8 radio 1600: http://www.multiupload.com/VDJGVNXJ6Y
miRom 8 radio 0300: http://www.multiupload.com/RP1WJZKA48
miRom 7 radio 0321: http://www.multiupload.com/CBZG3QUHAD
and the 0321: http://www.multiupload.com/CS80W6QP8E if you like to change a ROM to 0321 Radio
good luck, my friend , miro
Thanks mirolg
Downloading now. Will let you know later. I also found a 0321 tsw file on my sd card, and have used TG Tool to decrypt it to a bin file, so if your's doesn't work I'll try this one as well
Didn't work :-( MOD 248 issue again. Retried wp7 just in case.. no good lol.
maybe qpst only way then.
I had this problem and i and i have not solved it yet. What happend?
1. At this point " 5. Install tg downloader and the 32 bit driver." driver not installed properly ....Qualcomm .... with red x. My OS is XP sp3 32bit
2. At this point " 10. Start download. on the 99% stay 1-2 min. PLEASE wait the 100% and the auto reboot " ... i get error ... invalid checksum , phone rebooted
I installed ZTEiT Common downloader and the acer f1 driver ... no problem
pressing and holding Camera + Power button get me Blue led . i flashed wp7 , phone rebooted, but nothing on the screen,
I tried to get back to wm 6.5 but at the end after reboot i get on the screen this code
MOD 0248, I tried many times and various wm6.5 ROM till i made a big mistake: flashing without SD card inside, after that PC does not recognized my TG01, I thought its bricked becouse it could not get in to downloader mode, no white led, only green, no message on the screen. I charge the battery via USB cable cut until 4,15 V in vain, nothing happend. I hope it will help others to see what risk assumes. good luck !
I see no reason why flashing without the SD card in would cause an issue.
Note: Rapidly flashing orange/red light normally means battery is too low/depleted... so recharge using either the USB cable cut trick, or buy a cheap mobile phone battery EXTERNAL charger. (One that you take the battery out to charge with).
This really does seem now to be a common theme. What the heck is going on here? Do some people have slightly different model phones, or are we doing something ever so slightly wrong?
Also: If i hold down Camera + Up Volume + Power, I get the message "checking ftm mode Shared memory RPC Failed! - Spin Forever!". Now does this mean it's not actually in ftm mode?
Bah. Just tried using TG Downloader on a Windows XP Virtual Machine. I cannot get it to open the port. Regardless of whether I have installed drivers. Even tried setting the COM Ports to be the same value in a vain hope, or installing the drivers into W7 as well, but no use :-(
It was mentioned about having to use TG01C but I can only use (on my XP Laptop) TG01W, otherwise it doesn't open the port and flash. Do I need a slightly different boot loader for my phone or something?
The bit I REALLY don't get is that unless you manually install the drivers for the phone (I.e. going into the device manager, and selecting the folder, and then letting it pick up that you have plugged in a TG QDLoader... it won't work. BUT.. the guide makes absolutely no mention of this? This seems odd.
Well... I've tried:
Different cables
Different ROM's (WP7 and WM6.5) mirolg's and nokser's
Decoding Different ROM's
Redownloaded bootloaders from different sources
Charged the battery 100% in an external charger each time
How the heck am I going to get out of the MOD 248 situation (wm6.5) / Green light (WP7)
What other options for flashing are open to me? I can't boot wm6.5 or wp7 :-( Does my phone need a different boot loader perhaps?
I do not believe my phone is bricked, because it does have a display and it can sometimes tell me the FTM check failed (using different buttons to force the FTM option). "nyl" managed to get out of this MOD 248 situation with a different ROM, but I can't for some reason.
I am scared to flash any other rom than a 0321 rom, although I can obviously change radio's on other rom's if need be.
it's really depressing to see you're trying to flash the wp7 without any sucess . so sorry for you. wp7 bootloader from my [guide] werks very well. I think it not exist a another or different wp7 bootloader.
I like to help you, but I don´t know nothing over this MOD 248 issue. In other thread i have read, one user with same/similar issue, solved it with flash with qpst method .........
have you try it?
Don't think I can do QPST method if I can't load anything? (I've had three ciders tonight so forgive me - we came second in the pub quiz.. our first win (top three!) lol ;-) )
Will look into it.
I realise I kinda vocal on my issue - and let me state right now: "I do NOT blame you guys, I thank you so VERY MUCH for creating these WP7 ROM's, you only have my upmost respect "
I do actually see a fair number of people saying they were unable to flash correctly (i.e. Stuck between WM6.X and WP7 :-( ) So I figure I have to keep trying so that I can provide a solution for those people as well. Maybe I can compare my phone model/year/serial number/place of manufacturer etc to other people that are having issues, and those that had success?
Hello, I was happy to hear that now it is possible to use the W7 with Tsunagi, but all methods are only for the TG01.
I own the X02T (is a T01A Japanase but with another carrier, SOFTBANK), i success install the miRom WP7 032 7 radio, using TG01toT01A Converter Utility, and my phone start normal with pin method.
But when I tried to install W7, I can not install the windows driver for the "Toshiba DL," I put the phone in download mode using pin 1 and 3, but when I connect to the PC, it does not find the driver, i tried to use the acer driver and the TG_Download_USB_Driver, but does not recognize.
I try with Windows 7 64 and with Vista 32, without success.
Plz someone could give a hand?
eekthecat said:
Hello, I was happy to hear that now it is possible to use the W7 with Tsunagi, but all methods are only for the TG01.
I own the X02T (is a T01A Japanase but with another carrier, SOFTBANK), i success install the miRom WP7 032 7 radio, using TG01toT01A Converter Utility, and my phone start normal with pin method.
But when I tried to install W7, I can not install the windows driver for the "Toshiba DL," I put the phone in download mode using pin 1 and 3, but when I connect to the PC, it does not find the driver, i tried to use the acer driver and the TG_Download_USB_Driver, but does not recognize.
I try with Windows 7 64 and with Vista 32, without success.
Plz someone could give a hand?
Click to expand...
Click to collapse
There is already floating .bin image contatining whole bootloader for WP7, you need to encode it into tsw/enc with t01a key and then flash, it should success and later use tg01 instuctions
Thanks for responding, but how can I do this? i know use the TG01toT01A Converter Utility to convert tsw to tsd (work with my phone), but bootloader dont work, i need use pin to start fone with T01A logo (DOCOMO).
But the problem is where i can get windows driver to make TG_Downloader work? My windows dont recognize the phone.
eekthecat said:
Thanks for responding, but how can I do this? i know use the TG01toT01A Converter Utility to convert tsw to tsd (work with my phone), but bootloader dont work, i need use pin to start fone with T01A logo (DOCOMO).
But the problem is where i can get windows driver to make TG_Downloader work? My windows dont recognize the phone.
Click to expand...
Click to collapse
You need to flash rom with radoi 321 first, I don't know how it goes on t01a but if there's conversion tool it may work, then try to connect into TGDownloader, I recommend 32 bit system and administrative privigles.
aeroflyluby said:
You need to flash rom with radoi 321 first, I don't know how it goes on t01a but if there's conversion tool it may work, then try to connect into TGDownloader, I recommend 32 bit system and administrative privigles.
Click to expand...
Click to collapse
I flash the miRom 7 radio 0321 and working fine, but when i connect the phone in PC windows cant find the driver, soo TGDownloader cant find my phone.
I try with Windows 7 64bit and with Windows Vista 32 bit, and no one driver work.
Plz any idea?
eekthecat said:
I flash the miRom 7 radio 0321 and working fine, but when i connect the phone in PC windows cant find the driver, soo TGDownloader cant find my phone.
I try with Windows 7 64bit and with Windows Vista 32 bit, and no one driver work.
Plz any idea?
Click to expand...
Click to collapse
xp 32 bits and install the driver , that's the problem.
I had that problem but with xp 32 bit and installing the driver, so good
tcampomanes said:
xp 32 bits and install the driver , that's the problem.
I had that problem but with xp 32 bit and installing the driver, so good
Click to expand...
Click to collapse
Windows XP still dont work!! Can't install the driver, but i find this and WORK GREATS!!!!
yep!
finally i found the solution!
open tsbtgdl0.inf in C:\Program Files\TOSHIBA\TG01W Download Driver or what ever u installed
then,open device manager and check ur Toshiba DL with right click and choos "Property“ and find characters like "USB\Vid_0930&Pid_0d6c"
that's ur real device IDs
then in the tsbtgdl0.inf edit below characters to what u just find
Code:
[TsbSerialPort]
%TsbDevice1% = TportInstall00, USB\Vid_0930&Pid_0d80
[TsbSerialPort.NTia64]
%TsbDevice1% = TportInstall00, USB\Vid_0930&Pid_0d80
[TsbSerialPort.NTamd64]
%TsbDevice1% = TportInstall00, USB\Vid_0930&Pid_0d80
save and search driver in tsbtgdl0.inf folder again,u will be happy
Aftrer flash the Bootloader WP7, i can put phone in Download mode (blue led). Choose multi—download and put the 3 files (flash.bin,NPRG8650.hex, partition.mbn) and start! But after press start in "Common downloader V4.7.20 For Android" Begin download the NPRG8650.hex and RAM, and download the partition.mbn and start RESETTING, soo after 15 sec get error Reset Fail.
Pls someone hava any idea?
Hi. I'm also a owner of X02T and using Softbank SIM now. I'm very interested in flashing to WP7.5 because WM6.5 is outdated but I wonder if after flashing to WP7.5, all features like phone, SMS, EMS and etc will work or i'm limited to only certain function and would not be able to use Softbank carrier. Thanks.
WORKING!!!
finally managed to install WP7, boot without PIN (normal way), realy fast boot, and fast OS, very nice, nothing like WP6.5.
now i working to fix 3G and market
congratulate
u did a good job
eekthecat said:
finally managed to install WP7, boot without PIN (normal way), realy fast boot, and fast OS, very nice, nothing like WP6.5.
now i working to fix 3G and market
Click to expand...
Click to collapse
Does Softbank SMS and MMS works after you install WP7? I'm using X02T and interested to flash to WP7.5 but I use SMS and MMS.
wyemarn said:
Does Softbank SMS and MMS works after you install WP7? I'm using X02T and interested to flash to WP7.5 but I use SMS and MMS.
Click to expand...
Click to collapse
SMS work, but i dont know abou MMS, because i dont have Internet Plan.
WIFI, SMS, CALL is working fine, Market work after get the new serial with Microsft.
eekthecat said:
SMS work, but i dont know abou MMS, because i dont have Internet Plan.
WIFI, SMS, CALL is working fine, Market work after get the new serial with Microsft.
Click to expand...
Click to collapse
SMS work mean you can sent the message via reply it?
ryo2456 said:
SMS work mean you can sent the message via reply it?
Click to expand...
Click to collapse
Yes, you can send or reply SMS normally
how did you manage to solve the problem on hang on resetting...
---------- Post added at 06:43 PM ---------- Previous post was at 06:38 PM ----------
eekthecat said:
Aftrer flash the Bootloader WP7, i can put phone in Download mode (blue led). Choose multi—download and put the 3 files (flash.bin,NPRG8650.hex, partition.mbn) and start! But after press start in "Common downloader V4.7.20 For Android" Begin download the NPRG8650.hex and RAM, and download the partition.mbn and start RESETTING, soo after 15 sec get error Reset Fail.
Pls someone hava any idea?
Click to expand...
Click to collapse
how did you solved this problem... mind if you give me a pm on how to solved this... Thank You..
Ive opened this thread coz many people are finding my tutorial usefull
so here goes and if it helps let me know and give me a thanks
Hi i was new to all this and installed dynamics v2.0 fully unlocked rom the other day and this is how i went about it
download this
RUU_Mozart_Orange_UK_1.24.061.35_Radio_5.50.09.18_22.24.50.09U
http://www8.zippyshare.com/v/48117282/file.html
this is a load your phone back to 1.24
to install it i did this
turn phone off hold down volume down and turn phone on you should go to the bootloader screen then plug in your usb cable to the pc,
then on the white line at the bottom on phone screen should say usb instead of serial but maybe it will need to install some drivers cant remember 100%
when it is ready open that file and click the RomUpdateUtility.exe and follow the steps in that then you will have your phone back to 1.24
next you can follow this post here and download the attachment at the bottom named DFT_XSPL_WP7FG1.rar this what u need for this step
http://forum.xda-developers.com/showthread.php?t=1195647
basically this is the install procedure u may need to install active sync (XP) or windows mobile device center (vista and 7) but i did not have to my phone automatically did this
DFT_RSPL_WP7FG1_LAUNCH allows you to load RSPL on the device:
1. Extract ALL files from RAR archive.
2. Run DFT_RSPL_WP7FG1_LAUNCH (with administrative rights to access USB)
3. Mindfully reads information text. Press “Next” button.
4. Reset your device and hold “Volume Down” button during reset to enter OSPL mode.
5. Connect your device to PC via USB cable.
6. Now you may need to install proper USB drivers. They come with Active Sync / Windows Mobile Device Center.
7. Install drivers if required.
8. Make sure device show “USB” at the bottom instead of “Serial”.
9. Press “Next” button in the wizard. It should detect your phone.
10. If you are using WCEUSBHS driver under Windows Vista/7 (for MTTY or MAGLDR TTY for example), you should apply “Windows XP compatible mode” in the properties of EXE file to get connection.
11. After successful connection it should show device codename and allows to choose installed OSPL version.
12. You should look at the screen and select OSPL version in drop down list box. You need do this because it’s not possible to detect installed version via USB.
If your current SPL version doesn't present in the list, you can choose nearest version,
BUT ONLY IF IT HAS SAME FIRST NUMBER!!
Example: You have 4.XX on the device. Do NOT choose 1.XX 2.XX 3.XX.
13. Press “Next”. Wait until comes final page.
14. Read and close window
15. Look at the device – it must reboot to RSPL.
16. If you see RSPLX.Y.Z and “CotullaRSPL” on the screen – the task done! Otherwise, please report in this thread about your problems.
17. Put some feedback in this thread for community and developers.
Installing HSPL
DFT_HSPL_WP7FG1_INSTALL allows you to install HSPL on the device:
1. Launch RSPL on the device like described above.
2. Be sure that you close RSPL wizard window.
3. Run DFT_HSPL_WP7FG1_INSTALL.exe (with administrative rights to access USB)
4. Mindfully reads information text. Press “Next” button.
5. Proper drivers already must be installed in RSPL step.
6. Press “Next” button in the wizard. It should detect your phone.
7. If you are using WCEUSBHS driver under Windows Vista/7 (for MTTY or MAGLDR TTY for example), you should apply “Windows XP compatible mode” in the properties of EXE file to get connection.
8. After successful connection it should show device codename and allows to choose HSPL or OSPL version to install. OSPL means you install stock SPL back.
9. Check device codename, if something wrong turn off computer and run to the nearest forest. Grab some water with yourself.
10. Press “Next”. Wait until comes final page.
11. Device will reboot and start to boot OS.
12. Reset it and enter SPL mode again. Be sure there HSPLX.Y.Z and “CotullaHSPL” appear.
13. Put some feedback in this thread for community and developers.
Now u are ready
you can find what custom rom you want i used dynamics v2.0 which can be found here and its fully unlocked aswell so all i all im pleased with it
http://forum.xda-developers.com/showthread.php?t=1520352
download it and install the same way we installed the 1.24 rom in the begining of this post
turn phone off hold down volume down and turn phone on you should go to the bootloader screen then plug in your usb cable to the pc,
then on the white line at the bottom on phone screen should say usb instead of serial
when it is ready open that file and click the RomUpdateUtility.exe and follow the steps in that and then you will have loaded your desired custom rom onto your phone
I hope this helps some of u out and happy modding
best regards
steve
1.24
Great guide thanks, my phone is network unlocked do you know if that will revert once upgraded? also you mention rolling back to 1.24 what does 1.24 mean,and how do i find out if my device is on 1.24 already? one last Question how are you finding the rom any issues with it?
cheers
Geoff
geofferz said:
Great guide thanks, my phone is network unlocked do you know if that will revert once upgraded? also you mention rolling back to 1.24 what does 1.24 mean,and how do i find out if my device is on 1.24 already? one last Question how are you finding the rom any issues with it?
cheers
Geoff
Click to expand...
Click to collapse
1.24 im refering to the SPL you can find your version by turning the phone off holding volume down and power button and u will see your SPL at the top,
im not sure about the unlocked sim/network im new to all this aswell maybe do a search on the forums and see if you can find the answer, but i dont know this 1 sorry :/
rom is good no issues had a cable issue yesterday that wouldnt let me charge my phone but thats down to my dodgy cable
you dont have to install this rom you can use any custom rom you like or might find out there
anyways hope this helps
Launch RSPL
Thanks a great help.. ok to use to add tunes via zune? last bit on installing the custom Rom, what ruu option do I choose?
Cheers
hehe the first stage 1.2 spl.. when I open the rom update it gives a error 208? the update utility cannot open the requested file? any ideas and do i have to down to 1.2?
edit..Windows Mobile Device has been installed but when I open it, its not connected!! I powered of the phone with volume down. I can see the spl and usb at the bottom and it installed usb drivers etc, Im I missing a driver?
thanks once again
geofferz said:
hehe the first stage 1.2 spl.. when I open the rom update it gives a error 208? the update utility cannot open the requested file? any ideas and do i have to down to 1.2?
edit..Windows Mobile Device has been installed but when I open it, its not connected!! I powered of the phone with volume down. I can see the spl and usb at the bottom and it installed usb drivers etc, Im I missing a driver?
thanks once again
Click to expand...
Click to collapse
hi u don't need to worry about mobile device center this never picked up my phone either until I installed the custom rom
Don't ask why I've no idea
So what's happening when you press volume down and power you are seeing the multicolored bootloader screen right?
If so I don't know why the rom won't install for you
Maybe I've heard your firmware is at .707 if so you need y cables and its harder to downgrade your sol
tell me the firmware version please and ill try help u its in settings then about then advance on your phone if I remember
Oh also do not extract the 1.24 from the .rar file run everything from there
This is why ur getting that error I think
geofferz said:
Thanks a great help.. ok to use to add tunes via zune? last bit on installing the custom Rom, what ruu option do I choose?
Cheers
Click to expand...
Click to collapse
you dont need to select a option just load ROMUpdateUtility.exe
ive just downlaoded and reinstalled the rom myself to try see what u mean and i dont get this option
when you go to bootloader screen on your phone and it says usb open the rom file and click ROMUpdateUtility.exe
now dont open active sync or mobile tools as it says on the program information
just click the tick boxes and continue through the process
maybe try download the rom again found this
ERROR [208] : FILE OPEN
ERROR [210] : FILE READ
These error messages indicate that RUU lacks certain important files and cannot continue with the update. Please get the complete RUU package again.
but like i sed i have downloaded the file myself and it is working for me without any problems
beany2009 said:
hi u don't need to worry about mobile device center this never picked up my phone either until I installed the custom rom
Don't ask why I've no idea
So what's happening when you press volume down and power you are seeing the multicolored bootloader screen right?
If so I don't know why the rom won't install for you
Maybe I've heard your firmware is at .707 if so you need y cables and its harder to downgrade your sol
tell me the firmware version please and ill try help u its in settings then about then advance on your phone if I remember
Click to expand...
Click to collapse
Thanks for the help.
My firmware is 2250.21.40600.61,hope I don't need y cables for this version..
I see the multi coloured screen, and once plugged in to my pc it says usb at the bottom..
Strangely the 1.24 rom update works sometimes and not others, can you remember when you do done it, did it tell you want version currently on? because it didn't for me, I pressed next until update screen and was on 0% for bout 6-7 mins, my phone also displayed the same, how long did it take roughly
As regards to the Dynamics rom update.exe ( I opened with no phone attached ) It says welcome to the advanced rom update utility for Htc Mozart below that are, two ruu options.. regular (this is default) and below is custom I was thinking or using logic that I don't think i have hehe.. that the custom would be the option? or leave it
I really appreciate your help on this, I have installed many custom rom on android,but this windows phone grr annoying but I wont give up.
geofferz said:
Thanks for the help.
My firmware is 2250.21.40600.61,hope I don't need y cables for this version..
I see the multi coloured screen, and once plugged in to my pc it says usb at the bottom..
Strangely the 1.24 rom update works sometimes and not others, can you remember when you do done it, did it tell you want version currently on? because it didn't for me, I pressed next until update screen and was on 0% for bout 6-7 mins, my phone also displayed the same, how long did it take roughly
As regards to the Dynamics rom update.exe ( I opened with no phone attached ) It says welcome to the advanced rom update utility for Htc Mozart below that are, two ruu options.. regular (this is default) and below is custom I was thinking or using logic that I don't think i have hehe.. that the custom would be the option? or leave it
I really appreciate your help on this, I have installed many custom rom on android,but this windows phone grr annoying but I wont give up.
Click to expand...
Click to collapse
lol np mate ill try help as best i can
right i understand your bit now about the dynamics rom u need to select regular on this part
custom i think would be if u want to edit it or some **** but i have no idea so u use regular mate because this is the actual rom file made but remember u must downgrade and load rspl and hspl onto your phone before doing this step
right my firmware is 2250.21.51301.401 but i dont know if this changes on installation of the downgrade and adding the custom rom like i sed im a complete noob with this myself but all went smoothly for me thats why i made the tutorial
and no mate my phone took about 5-10 mins to install the 1.24 orange rom
have u tried a hard reset first and then see if it helps with the installation
ill search around for your firmware and see if there has been issues
edit..........................................
did a search on the forums and your firmware comes up with nothing :/ did a google and only shows this thread did you type the numbers correctly?
also you mean that the rom update works sometimes and not others?
if it works once it should install it mate np's
When you load you phone into bootloader the multicoloured screen can you please type here what u see mainly the top letters and numbers
beany2009 said:
When you load you phone into bootloader the multicoloured screen can you please type here what u see mainly the top letters and numbers
Click to expand...
Click to collapse
again thanks for your help
ok here goes red: PD 67100 ss-BC (4k)
SPL-4.6.2250.0(129193) mng
what you think?
i think my SPL was on that before so i dont know why u are having issues mate :/
maybe wait and see if a developer can read this and give us some info on why its not working for you :/
Thanx For The Help And the Tutorial It Was very Helpfull
Now my phone Is running dynamic 2.0
hey can u tell me what other custom roms are available that i can install on my phone and if there are any different methods of installing them
no problem mate glad it helped
erm the only other custom rom i have seen on mozart is deepdishing v7.0 you can find this in the development thread inside mozart topics
and for me mate im not sure and have not seen another way of installing another custom rom but im new to all this myself
anyway glad this helpped
regards
my computer wont pick up htc 7 mozart in bootloader
can anyone help me its doing my head in .
when you connect your phone to pc in bootloader its not showing as usb on the bottom of bootloader screen?
just serial?
just to confirm. this wont work on Asian handsets.
beany2009 said:
Ive opened this thread coz many people are finding my tutorial usefull
so here goes and if it helps let me know and give me a thanks
steve
Click to expand...
Click to collapse
Thx for the easy to follow guide.
It worked on a telstra brand mozart using windows 8.
Sent from my GT-N7105 using Tapatalk 2
As title states trying to go back to stock but activesync not recognising my phone I have tried everything but nothing working. Since installing wp7.8 rom it doesn't get recognised and I do not know what else to do so any help would be greatly appreciated. Thanks
Well ...
david.wilson.1987 said:
As title states trying to go back to stock but activesync not recognising my phone I have tried everything but nothing working. Since installing wp7.8 rom it doesn't get recognised and I do not know what else to do so any help would be greatly appreciated. Thanks
Click to expand...
Click to collapse
Dear friend ... Would you please give more info ? ( if you had WPH 7.8 , you have HSPL which means you could have flashed WM in Bootloader so why didn't you flash the ROM there ? ) ... Thanks in advance
With Best Wishes
Hitman1376
hitman1376 said:
Dear friend ... Would you please give more info ? ( if you had WPH 7.8 , you have HSPL which means you could have flashed WM in Bootloader so why didn't you flash the ROM there ? ) ... Thanks in advance
With Best Wishes
Hitman1376
Click to expand...
Click to collapse
Yes I have hspl. I have tried everything, I hav magldr 1.12 so I cnt flas from sd, when I try n use usb flasher the updater can't find my device it has error code 262 which is activsync not recognising the device so I cannot think of another way to flash the rom. Im goin to try and use someone else computer incase its mine but until then trying to findanother method of doing it
??? ... but you can't flash WM on MAGLDR !!!!
david.wilson.1987 said:
Yes I have hspl. I have tried everything, I hav magldr 1.12 so I cnt flas from sd, when I try n use usb flasher the updater can't find my device it has error code 262 which is activsync not recognising the device so I cannot think of another way to flash the rom. Im goin to try and use someone else computer incase its mine but until then trying to findanother method of doing it
Click to expand...
Click to collapse
But remember that you can't flash WM using Magldr !!!!!!!!! .... well if now you have WM stock and you want to return to it , you should go to bootloader menu ( shut down and then hold "Vol Down + Power button" to get to the colorful menu then run Task29 than Run the WM installation ( NOTE : Remember that all bootloaders are flashed this way and if you flash the WM , your Magldr is ging to get removed !!! also remember that doing a Task29 is necessary to remove the bootloader you had before and if you don't do it , your installed bootloader will crush !!! ) .. Goodluck
With Best Wishes
Hitman1376
hitman1376 said:
But remember that you can't flash WM using Magldr !!!!!!!!! .... well if now you have WM stock and you want to return to it , you should go to bootloader menu ( shut down and then hold "Vol Down + Power button" to get to the colorful menu then run Task29 than Run the WM installation ( NOTE : Remember that all bootloaders are flashed this way and if you flash the WM , your Magldr is ging to get removed !!! also remember that doing a Task29 is necessary to remove the bootloader you had before and if you don't do it , your installed bootloader will crush !!! ) .. Goodluck
With Best Wishes
Hitman1376
Click to expand...
Click to collapse
What is task 29? If that is the stock rom then yes I have that I have also tried all of that on the 3 colour screen but it just doesnt do anything its recognising the usb on the coloured screen but when I start the process nothing actually happens it gets stuck at 0%
Well ...
david.wilson.1987 said:
What is task 29? If that is the stock rom then yes I have that I have also tried all of that on the 3 colour screen but it just doesnt do anything its recognising the usb on the coloured screen but when I start the process nothing actually happens it gets stuck at 0%
Click to expand...
Click to collapse
Task29 is a flash able image which erases the data on the phone and makes it ready for flashing a new Bootloader (WM / MAGLDR / CLK ) ... That may be the 0% reason .... try doing a Task 29 ... I recommend you to try this App ( it has MAGLDR + CLK + Task29 ) ... Good luck
With Best Wishes
Hitman1376
eretrs that
hitman1376 said:
Task29 is a flash able image which erases the data on the phone and makes it ready for flashing a new Bootloader (WM / MAGLDR / CLK ) ... That may be the 0% reason .... try doing a Task 29 ... I recommend you to try this App ( it has MAGLDR + CLK + Task29 ) ... Good luck
With Best Wishes
Hitman1376
Click to expand...
Click to collapse
Hey thanks but I have just spent ages downloading and setting up that software to eventually get to video tutorial where I am then told that you still need activesync. As stated earlier my activesync is not working my phone is not being recognised on activesync and that is where my problem lies so please if you can help with that then good. Cause otherwise im wasting my time
I would reinstall activesync, turn off any antivirus software, especially if Norton.
Remove SD card, put device into bootloader manually *shut down and then hold "Vol Down + Power button* then connect to usb cable & try flashing standard wm6.5 rom.
Activesync download & general tips & tools can all be found in HD2 Wiki.
http://forum.xda-developers.com/wiki/HTC_HD2
Mister B said:
I would reinstall activesync, turn off any antivirus software, especially if Norton.
Remove SD card, put device into bootloader manually *shut down and then hold "Vol Down + Power button* then connect to usb cable & try flashing standard wm6.5 rom.
Activesync download & general tips & tools can all be found in HD2 Wiki.
http://forum.xda-developers.com/wiki/HTC_HD2
Click to expand...
Click to collapse
I have done the uninstall and install of activesync but I haven't tried removing sd card so will try that again.if it doesn't work I will then try a newer computer and see if I can get it working through wmc instead.
I have tried everything that has been suggested. Task 29 also isnt working as it requires activesync dies not recognise device.
Thanks for trying to help everyone. I managed to sort it and it was the hspl had messed up I have sorted it amd now thats me in android so goodbye windows phone lol