After downgrade to 6.5 with program downloader 4. When i use camera+ power i have white led and on screen i have white text : MOD fs_device. C 0248
This screen after 10-20 second turn of and led is red.
Please help.
bahni said:
After downgrade to 6.5 with program downloader 4. When i use camera+ power i have white led and on screen i have white text : MOD fs_device. C 0248
This screen after 10-20 second turn of and led is red.
Please help.
Click to expand...
Click to collapse
1.program downloader ? TG Downloader, yes? 2. which 6.5.x ROM as .bin you have flash? 3. what exactly you are planning, why use camera+ power key?
I use camera and power becouse only this combination do something with phone.
I flash bin Nokser rom.
i use program downloader 4 from nicola92 post.
it will just do this with noksers wm6.5.x rom
i also had the screen MOD fs_device. C 0248
just flash a different wm6.5.x rom or whatever other rom you want its just noksers rom that did this to me
How you upload rom? Becouse after 10 second screen turn off.
jonnyhall1bmx1 said:
just flash a different wm6.5.x rom or whatever other rom you want its just noksers rom that did this to me
Click to expand...
Click to collapse
After that, the phone displays a green light, vibrates and all. Now TG downloader doesn t even see the phone/
OK which ROM will it NOT do it with that will restore my phone as I have this problem as well. Please a link to a bin file would be excellent (So I don't have to convert it as I don't know how).
I have to say I feel a bit nervous about flashing something that doesn't have the 0321 radio, or shouldn't I be worried about that?
---------- Post added at 01:47 AM ---------- Previous post was at 01:45 AM ----------
propeller_nf88 said:
After that, the phone displays a green light, vibrates and all. Now TG downloader doesn t even see the phone/
Click to expand...
Click to collapse
Ah.. welcome to my world :-( Are you trying a bin file or a tsw file? (And why does it seem to work for some people and not for others??)
There MUST be something common here. Either people have different versions of phones OR we are all making the same mistake somewhere?
For example: I had to go into the device manager and manually update/reinstall the drivers for the wm6.5 bootloader drivers and the wp7 bootloader driver, as otherwise it wouldn't see the phone.
Also.. I'm flashing bin files. I figure the cable is fine as well as it seems to install the bootloader so I can flash, and the phone restarts when it should etc.
I was looking round for this MOD 248 thing, and the phone not booting, and it looks like back in October 'nyl' and a few others were getting this issue, yet still managed to recover there phones. So don't lose hope
I don't know why, but it seems like certain bin files work for some people but not for others? Very strange.
If anyone has some other bin files (WM6.5 AND WP7 that they know will work, please link to them )
Thanks!
Scougar said:
I was looking round for this MOD 248 thing, and the phone not booting, and it looks like back in October 'nyl' and a few others were getting this issue, yet still managed to recover there phones. So don't lose hope
I don't know why, but it seems like certain bin files work for some people but not for others? Very strange.
If anyone has some other bin files (WM6.5 AND WP7 that they know will work, please link to them )
Thanks!
Click to expand...
Click to collapse
hi, i don't know much over the qpst upgrade method- but few user here with same/similar issue (flash! although get a checksumm error!) have managed it succesfull ...........
Hey mirolog
Do you have a working link to your mirom8 wm6.5 build please? I assume I will need to change radio on it from 300 to 321 before I flash though as well?
I will try the QPST method if another rom doesn't solve my issue.
Scougar said:
Hey mirolog
Do you have a working link to your mirom8 wm6.5 build please? I assume I will need to change radio on it from 300 to 321 before I flash though as well?
I will try the QPST method if another rom doesn't solve my issue.
Click to expand...
Click to collapse
hi Scougar
miRom 8 radio 1600: http://www.multiupload.com/VDJGVNXJ6Y
miRom 8 radio 0300: http://www.multiupload.com/RP1WJZKA48
miRom 7 radio 0321: http://www.multiupload.com/CBZG3QUHAD
and the 0321: http://www.multiupload.com/CS80W6QP8E if you like to change a ROM to 0321 Radio
good luck, my friend , miro
Thanks mirolg
Downloading now. Will let you know later. I also found a 0321 tsw file on my sd card, and have used TG Tool to decrypt it to a bin file, so if your's doesn't work I'll try this one as well
Didn't work :-( MOD 248 issue again. Retried wp7 just in case.. no good lol.
maybe qpst only way then.
I had this problem and i and i have not solved it yet. What happend?
1. At this point " 5. Install tg downloader and the 32 bit driver." driver not installed properly ....Qualcomm .... with red x. My OS is XP sp3 32bit
2. At this point " 10. Start download. on the 99% stay 1-2 min. PLEASE wait the 100% and the auto reboot " ... i get error ... invalid checksum , phone rebooted
I installed ZTEiT Common downloader and the acer f1 driver ... no problem
pressing and holding Camera + Power button get me Blue led . i flashed wp7 , phone rebooted, but nothing on the screen,
I tried to get back to wm 6.5 but at the end after reboot i get on the screen this code
MOD 0248, I tried many times and various wm6.5 ROM till i made a big mistake: flashing without SD card inside, after that PC does not recognized my TG01, I thought its bricked becouse it could not get in to downloader mode, no white led, only green, no message on the screen. I charge the battery via USB cable cut until 4,15 V in vain, nothing happend. I hope it will help others to see what risk assumes. good luck !
I see no reason why flashing without the SD card in would cause an issue.
Note: Rapidly flashing orange/red light normally means battery is too low/depleted... so recharge using either the USB cable cut trick, or buy a cheap mobile phone battery EXTERNAL charger. (One that you take the battery out to charge with).
This really does seem now to be a common theme. What the heck is going on here? Do some people have slightly different model phones, or are we doing something ever so slightly wrong?
Also: If i hold down Camera + Up Volume + Power, I get the message "checking ftm mode Shared memory RPC Failed! - Spin Forever!". Now does this mean it's not actually in ftm mode?
Bah. Just tried using TG Downloader on a Windows XP Virtual Machine. I cannot get it to open the port. Regardless of whether I have installed drivers. Even tried setting the COM Ports to be the same value in a vain hope, or installing the drivers into W7 as well, but no use :-(
It was mentioned about having to use TG01C but I can only use (on my XP Laptop) TG01W, otherwise it doesn't open the port and flash. Do I need a slightly different boot loader for my phone or something?
The bit I REALLY don't get is that unless you manually install the drivers for the phone (I.e. going into the device manager, and selecting the folder, and then letting it pick up that you have plugged in a TG QDLoader... it won't work. BUT.. the guide makes absolutely no mention of this? This seems odd.
Well... I've tried:
Different cables
Different ROM's (WP7 and WM6.5) mirolg's and nokser's
Decoding Different ROM's
Redownloaded bootloaders from different sources
Charged the battery 100% in an external charger each time
How the heck am I going to get out of the MOD 248 situation (wm6.5) / Green light (WP7)
What other options for flashing are open to me? I can't boot wm6.5 or wp7 :-( Does my phone need a different boot loader perhaps?
I do not believe my phone is bricked, because it does have a display and it can sometimes tell me the FTM check failed (using different buttons to force the FTM option). "nyl" managed to get out of this MOD 248 situation with a different ROM, but I can't for some reason.
I am scared to flash any other rom than a 0321 rom, although I can obviously change radio's on other rom's if need be.
it's really depressing to see you're trying to flash the wp7 without any sucess . so sorry for you. wp7 bootloader from my [guide] werks very well. I think it not exist a another or different wp7 bootloader.
I like to help you, but I don´t know nothing over this MOD 248 issue. In other thread i have read, one user with same/similar issue, solved it with flash with qpst method .........
have you try it?
Don't think I can do QPST method if I can't load anything? (I've had three ciders tonight so forgive me - we came second in the pub quiz.. our first win (top three!) lol ;-) )
Will look into it.
I realise I kinda vocal on my issue - and let me state right now: "I do NOT blame you guys, I thank you so VERY MUCH for creating these WP7 ROM's, you only have my upmost respect "
I do actually see a fair number of people saying they were unable to flash correctly (i.e. Stuck between WM6.X and WP7 :-( ) So I figure I have to keep trying so that I can provide a solution for those people as well. Maybe I can compare my phone model/year/serial number/place of manufacturer etc to other people that are having issues, and those that had success?
Related
I know, I know: First use the board-search and google...
I did that and I couldn't find anything useful for my issue.
I'm trying to update my HTC Prophet G4 to WM6.1...
I wanted to use SoftSPL and after executing the SPL.lnk the screen turns white as it should, but after that Windows XP doesn't recognize my phone anymore as connected.
I tried different USB-Ports, but the "ROMUpdateUtility_NV_G4.exe" keeps telling me "Error 260" which means it couldn't connect to my phone.
I'm really desperate cause I've already tried to upgrade for some days...
So if anyone knows how to fix that plz write =D English and German are okay with me
mickgrand said:
I know, I know: First use the board-search and google...
I did that and I couldn't find anything useful for my issue.
I'm trying to update my HTC Prophet G4 to WM6.1...
I wanted to use SoftSPL and after executing the SPL.lnk the screen turns white as it should, but after that Windows XP doesn't recognize my phone anymore as connected.
I tried different USB-Ports, but the "ROMUpdateUtility_NV_G4.exe" keeps telling me "Error 260" which means it couldn't connect to my phone.
I'm really desperate cause I've already tried to upgrade for some days...
So if anyone knows how to fix that plz write =D English and German are okay with me
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=353547
Thanks for posting, but as I already told you: I did my research...
So I already tried different FlashingTools, like ProphetTools etc.
When I SoftSPL, I get to the whitescreen but i cannot make my pc recognize the phone at my usb-port.
When I enter the 3-Colored-Screen manually it shows the usb-connectivity, but I cannot update the ROM...
There was a way (I cannot remember anymore which way I did it, cause I really tried very often) I entered the 3-Colored-Screen and there was "RUU" written in the right upper corner of the screen. But then again the connectivity doesn't work...
Also tried different usb-ports and cables...
I could say that I'm feeling like a weirdo, cause upgrading a rom seems easy and still makes my day miserable xD
//EDIT:
Didn't see the "Lazy_Tool" at the first glance, but now after trying I still get the same error...
//EDIT2:
Realized that the error-code could be useful^^ --> "Error[260]: Update Error" (Sth like that^^)
I had a similar issue. When your PC reports it cannot connect to the phone - does the phone restarts?
mickgrand said:
Thanks for posting, but as I already told you: I did my research...
So I already tried different FlashingTools, like ProphetTools etc.
When I SoftSPL, I get to the whitescreen but i cannot make my pc recognize the phone at my usb-port.
When I enter the 3-Colored-Screen manually it shows the usb-connectivity, but I cannot update the ROM...
There was a way (I cannot remember anymore which way I did it, cause I really tried very often) I entered the 3-Colored-Screen and there was "RUU" written in the right upper corner of the screen. But then again the connectivity doesn't work...
Also tried different usb-ports and cables...
I could say that I'm feeling like a weirdo, cause upgrading a rom seems easy and still makes my day miserable xD
//EDIT:
Didn't see the "Lazy_Tool" at the first glance, but now after trying I still get the same error...
//EDIT2:
Realized that the error-code could be useful^^ --> "Error[260]: Update Error" (Sth like that^^)
Click to expand...
Click to collapse
260 IS A KIND OF CONNECTION ERROR,
PLEASE SOFTRESET AND TRY AGAIN!!!
1. FLASH NVID FIRST,
2. LAZY TOOL TO HAVE THE JOB DONE.
dwizard said:
I had a similar issue. When your PC reports it cannot connect to the phone - does the phone restarts?
Click to expand...
Click to collapse
If u want to know if I bricked the phone then no =) I can restart it and everythings fine^^
If u meant sth else plz specify your question a bit
@ dioxda2:
Ok I'll experiment a bit^^ I'll get my new hardware soon, so maybe the error won't be a problem^^ We'll see =)
mickgrand said:
If u want to know if I bricked the phone then no =) I can restart it and everythings fine^^
If u meant sth else plz specify your question a bit
Click to expand...
Click to collapse
OK, rephrasing: the problem I had with my phone was that while a ROM update was running the phone would restart and I got the same error you did.
It turned out the battery was at fault, after replacing it with a new one - it works great.
If u do as dioxda2 says all should be fine. He is right in saying 260 is a connection error. That means unplugging all usb devices out of ur machine. It also means disabling all other connection software, like my raspberry program that display device screen when active sync'd. I always disable my anti virus and firewall (make sure ur not connected to internet at time).
i always ensure that the flashing tool is on the root drive, not in many folders (so place flash tool direct on ur main hard drive in its folder as uve unzipped) this itself can cuase connection errors. Ensure battery is 50% min too.
Good luck
[img=http://img444.imageshack.us/img444/2017/dscn1600br9.th.jpg]
you will need
microsoft activesync installed on your windows pc
download ubrhurricane.rar from rapidshare HERE (link dead use this one)
http://www.megaupload.com/?d=JLO5H1L7
unrar this to your desktop.
to unlock go to the unlock folder and copy the cert.cab file to your phone using activesync and run the app from your phone. if your phone wont run the file then use the SDA_applicationUnlock.exe.
in the unlock folder you will find SPVServices.exe click SIMLock Tool and let it do its magic, after this click CID Tool. This will set your phones CID to 1111...
your phone will now be unlocked
we will now patch the ruu,
you will need to turn your phone off and hold the camera button whilst putting the usb into the phone. this will turn it on and show you a three colour screen. go to the spl folder use Patched_RUU.exe to flash your phone, after the bar has reached 100% you can unplug the phone. and turn it off.
now, use as.exe to kill microsoft activesync and then double click on MMTY142.exe this is what we will be using to flash your phone.
do the same thing we did before, hold the camera button and it will show you a 3 colour screen. but this time it will say
need an I U(0)?
make sure you select Y. (youwont see a N) you might need to do this a few times to get it right.
click the usb button and then it will show you a terminal which you will then type:
info2
this should tell you that your phone is SUPERCID (if it isnt then go back and unlock again otherwise the rest wont work)
now type
format BINFS
after that you will then need to tell them where the rom is, we will be using 413.bin which is selang09's wm 6.1.
type in
l c:\thefilepathtoyourdesktopgoeshere\ubrhurricane\413.bin
this will then flash your phone and you can turn it off after it says its complete. if this fails then just try it again its probally because you didnt get a Y at need an I U(0)? )
you can reboot and you will see your phone with wm 6.1 when it boots up it will be in the chinese language. this can be changed by pressing start, 6, 0, 2 and then select US English.
install t9 english.cab using activesync onto your phone to sort out the chinese keypad.
you will now have a working wm6.1 in english with an english t9.
at the moment selang09 413 wm6.1 rom is the best i have used. its VERY RELIABLE.
htc hurricane 4 ever
ps, use www.skyfire.com
Link not valid anymore.
Could you reupload ubrhurricane.rar
http://www.megaupload.com/?d=JLO5H1L7
sweet! just flashed it yesterday and it seems to be working fine.
I'm glad to see someone is still active in this part of the forum. been awfully quiet around here lately.
Hello, what other languages are there in the ROM? Any known problems?
only chinese and english mate, no problems. do rember to install the english t9 or one for your own language. everything works cheers.
Unlockable
I just get "phone is unlockable" message when trying sda_applcationunlock.exe.
On an orange UK g only sim c550 with vista and active sync active
Tried on XP and vista.
Anybody any thoughts appreciated.
are you sure you have copyed the cab file to your phone and its executed? then run the exe..?
is it a chinese rom?
hey guys, now i am tried 3 diffrent roms and always it is in chinese is it right.
may i change the language or do i need an english rom?
how can i change the language?
where i can find an english rom?
thanks a lot
lessew
ubrdave said:
click the usb button and then it will show you a terminal which you will then type:
info2
Click to expand...
Click to collapse
Hi there, i think there's meant to be a space between 'info' and 2,
e.g. "info 2"
cheers!
Definitely a space between info and 2
Couple of other little things that might be worth editing in your fine original post...
do the same thing we did before, hold the camera button and it will show you a 3 colour screen. but this time it will say
need an I U(0)?
make sure you select Y. (youwont see a N) you might need to do this a few times to get it right.
Click to expand...
Click to collapse
You might want to make ultra clear that we need to press 0/zero at this point, I was stumped for a while, tried pressing every key...
click the usb button and then it will show you a terminal which you will then type:
Click to expand...
Click to collapse
You might want to clarify this is the USB button in MMTY142, as I saw USB in the bottom left corner of my phone, and kept trying to press the left soft button instead.
Finally, to reassure people that nothing is wrong, they will need to restart after selecting US English as the language, for all menus to not show Chinese any more.
Thanks a lot for putting the guide together, I've had to go back to my C550/Hurricane after I cracked the screen on my Kaiser - I was getting annoyed with so few new/useful apps working on WM2003SE / pre-NET CF3, and had still had a backup-backup phone in the form of my SE K700, so decided to give WM6.1 a shot. Off to try and install PockeTwit now
Hi, my phone totally dies before I ran the Patched_RUU.exe; it just don't turn on or do anything else. Can you tell me something to bring it back?
Sorry, I don't know the answer, but others may find it useful to know if your phone won't enter the three colour screen, OR just won't turn on normally?
Just to confirm, what happens if you hold down the camera button on the side, then connect a (known working) USB lead between it and your PC? And if you connect your phone to a mains charger, does the orange LED light up to indicate charging is taking place? Any other previous symptoms with this phone?
SilentlyScreaming said:
Sorry, I don't know the answer, but others may find it useful to know if your phone won't enter the three colour screen, OR just won't turn on normally?
Just to confirm, what happens if you hold down the camera button on the side, then connect a (known working) USB lead between it and your PC? And if you connect your phone to a mains charger, does the orange LED light up to indicate charging is taking place? Any other previous symptoms with this phone?
Click to expand...
Click to collapse
Hi;
The phone is totally dead (No three colors screen, no ligth on, no nothing).
If I hold down the camera button on the side and then I connect a (known working) USB to the PC; guess what... yes! Nothing Happens!
If I connect the phone to a main charger then the orange LED light up.
If I remove the battery and then put it back again and try to turn it on the LED light up in red (it blinks just once).
Could anybody help pleeeeeease!!!!
THX
Hi,
I have a problem with the flash:
After "info 2" I get this:
Cmd>info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
CMD55 failed
HTCSSuperCID ' HTCE
And then nothing happend with "format BINFS"
What's the problem? I did something wrong? I tryed again with the unlocking procedure but it happened everytime!!
PLS HELP GUYS
You sure choose "Y" when you've been asked for UI interface.
You sure unkock your hurricane I'm mean Sim, Cid, SDA Applicattion.
Hi,
Yes I did! I used the spv tool for it, but no way to pass the "info 2".
Why?!?
Help Please
info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
***** user area size = 0xF400000 Bytes
HTCSSuperCID ' HTCE
Cmd>format BINFS
Format BinFS partition.
Format is completed!!
Cmd>l c:\rom.bin
clean up the image temp buffer at 0x8C080000 Length 0x01C40000
MTTYDownloadImage "c:\rom.bin"
:F=c:\rom.bin
start download
SHAddress 82040000h Length 02630000h
Before flashing new image , formatting old OS is completed!!
Start flashing new image!!!
*checksum = 0, skip checking
OEMFlashWrite(82040000h,8C080000h,01C00000h)
Update BINFS offset 0x00000000 length 0x01C00000 ...
WBinFS D=0x0 L=0x1C00000 CS=0xD3D7666A
WBINFS from S 0 l=29360128 57344 SS
ReadB A=0x0 L=0x1C00000 CS=0xD3D7666A
Update BINFS success.
2nd download dwVaddr=0x8C080000
*
Then it hangs for5 mins and mtty says about being idle for 5 mins? is it still flashing please can someone help thankyou
thanks for giving me a tutorial that help me
efficiently BRICK my hurricane in less then 2 minutes!
yay!
Followed instructions precisely..
after i did the "patched_RUU" update..
BRICKED.
bullshi*.
oraeanast said:
thanks for giving me a tutorial that help me
efficiently BRICK my hurricane in less then 2 minutes!
yay!
Followed instructions precisely..
after i did the "patched_RUU" update..
BRICKED.
bullshi*.
Click to expand...
Click to collapse
What an ungrateful & rude person you are. YOUR phone was bricked when YOU decided to try something on it. No-one forced you to attempt it.
As you may have guessed from other responses here, most of us have flashed this and other ROMs with no problem.
Is it definitely bricked? Have you tried various recovery techniques.
Have you previously tried asking for assistance in a non-confrontational manner, or even just asking for assistance?
OK... so I've posted in various threads about being stuck between WM6/6.5 and WP7, but from all I've tried so far all I can do is basically go between bootloaders getting blue/white leds and doing the flashes of various ROM's and getting nowhere. I personally believe the bootloaders are not working with the phone or something along those lines. Perhaps mine (and many others) phones are slightly different versions? (Model: TG01 / FCC ID:SP2-TM5-E01 / TYPE: TM5-E01 / Below barcode: MD: 0906)
I have flashed a whole variety of 6 and 6.5 ROM's without ever having an issue. So why won't it flash back now? Hence why I think it's the boot loader(s).
So, what are my options?
1) Can I short pin it? How do I do this.. what boot loader do I need on the phone? Is a boot loader necessary for this?
2) What other software tools might I be able to try, bearing in mind I can't load anything other than a bootloader and flash stuff that doesn't work.
3) Get a different boot loader??
(And frankly: Whilst we all except the risks of flashing ROM's, there seem to be a lot of people trying WP7 and failing, and being bricked.. I believe there is a common cause and we can revive people's phones - more than just mine).
When doing the PIN method, does it matter what the .enc file is called?
I'm trying pin short method because the downloader doesn't seem to have much effect.
EDIT: Nothing seems to happen when I short pin and press reset... seems a bit odd.
i revived mine about 10 times haha have you got facebook so we can use the chat on there? then i can try my best to help you out !!!
This could potentially help me with my bricked TG01 too....
What bootloader were you on when your device 'bricked'?
I was on Windows Phone 7 bootloader
Sent from my HTC Desire S using xda premium
jonnyhall1bmx1 said:
i revived mine about 10 times haha have you got facebook so we can use the chat on there? then i can try my best to help you out !!!
Click to expand...
Click to collapse
Got MSN/Skype/google talk?
olyloh6696 said:
This could potentially help me with my bricked TG01 too....
What bootloader were you on when your device 'bricked'?
I was on Windows Phone 7 bootloader
Sent from my HTC Desire S using xda premium
Click to expand...
Click to collapse
Bootloader: The bootloaders that were supplied by mirolg for the upgrade to WP7. I can flash between the WM6 bootloader and the WP7 bootloader, just it never boots (Obviously flashing the right OS after each).
I am wondering if there is a difference in the models/versions of phone that would cause the bootloader not to work?
NOTE: My only other concern is regarding the instructions. It doesn't make it clear what you need to do with the drivers for the USB. On my PC('s) is won't work with actually manually installed the drivers from the directories, otherwise no phone (port) is ever detected... but they seem to ignore this point. I had to go into the device manager to get it to see the port in order to flash. So.. is this right or wrong?
i have msn messenger, [email protected] , if you would like help i have some of my own methods to try and have worked on my tg01 sevreal times. just add me on msn messenger and i will help you out the best i can
Sent a request (Best take your email off again in case of spam)
Any news/progress ?
Sent from my HTC Desire S using xda premium
No progress yet. Same bricked state.
Even the short pin method won't work (Nothing actually happens when I try this method).
Trying to flash WP7 now with QPST, but it's not having it :-(
I can't get to the proper download mode, so use the hold camera button and power button, and it detects the 'download mode' it says, and then flashes multiple colours on the led. I press start in QPST, and it just goes to a white LED and says 'timeout waiting for ACK'
Major bummer.
EDIT: Phone now completed *********. Fabulous.
OK First lets make things clear here ....these are some myths about the malfunctioning of LCD ...
1 - don't open up and replace your lcd digitiser .. it's not hardware issue..trust me i've been there !
2 - some say it's becuz of cheap lcd protector (?)...NO
3 - using the registry editing technique and changing the PRIORITY registry node from 100 to 220
this was pure nonsense...doesn't work ...don't waste your time (though some report of success .. i don't know)
4 - factory reset ... NO .. don't lose your contacts for nothing
5 - reflashing Another Custom rom ..NO !
Now what to do then ?
two options and I recommend the 2nd one..
1 - install the Deuch t-mobile official rom that updates your phone's touch driver from v63 to v69. so that worked actually ...at least for a period of joyful time ! but after 5-6 months again..The phone went zombie on me...so obviously those deutch people's ROM isn't good for a long-term relationship...
(if you wanna go that route ... Check out This Thread )
2 -You could install this rom that actually reinstalls (or downgrades )the Version 63 touch driver on your device. ... and it works like a charm...
Here's The steps to install it
1 - Download The Attachment below (touch driver)
2 - Download Windows Mobile Device Center From Google And install it on your PC
3 - Download Advance mozart RUU File From Here
4 - Put This RUU.exe inside a folder beside the Touch Driver File You Downloaded earlier
5 - Rename The touch driver file to mozaimg.nbh
6 - take a backup of all the file on the phone that is important to you because all the data gets wiped out after installing the touch driver...
7 - turn off the device .. then hold the volume down button and turn it on .. you should see a weird RGB screen with some text on it ... Lookup the version of the touch driver (if you want !) ... Now down below it says SERIAL
if you connect it with the usb cable to pc and you've already installed windows mobile device center it should change to USB...
8- NOW you're ready to install the touch driver ... click on mozartRUU.exe file and click next all the way..wait for it to finish
Update - 10/25/2013
Something I clearly forgot to mention here is that My device was already on a Custom rom when I Downgraded the touch driver...
So as some users Noted ( Thanks to debelimark) ... I think you have to first flash some custom rom into you phone then downgrade the Touch driver...
Hopefully you wont get into any errors when installing the driver
thanks for your sharing but i dont understand your these words
((((but i give you the caution...although it's just a touch driver rom (?) for like 1 MB but it resets whatever rom you have in your phone..I think that's worth it ..isn't it ?)))))
what you mean by that? do you mean the rom will become like a stock rom? plz explain it
Do I need a hspl to do the second method?
Hi, i'm still new to windows phone, its really refreshing to use apart from the lock screen bug. The only way I can use the phone from the lock screen is to start up the camera app and then back out to the homescreen. The phone works fine and is responsive but when I try to wake the phone from sleep the touchscreen does not respond. My phone is completely stock and has not been modded at all. I have rooted and flashed radio's and roms on android but I'm a little worried about messing with windows. Can you provide a step by step guide please? The forums here are excellent but a little difficult to navigate for a windows noob...
Thanks again...
I do beleive its a driver problem, But has anybody verified this patch working?
I havent flashed anything that updates only the driver till day....
I have similar problem with my LCD touch.
Sometime touch freeze for 1-2 seconds, sometime is less responsive.
My driver ver. is v72
yeah, mine is v69.... any help would be appeciated guys...
surround touch driver??
vista_66 said:
OK read on !
First off lets make things clear here ....these below ARE NOT THE REASON OF MALFUNCTIONING NOR SOLUTION
1 - don't open up and replace your lcd digitiser .. it's not hardware issue..trust me i've been there !
2 - some say it's becuz of cheap lcd protector (?)...NO
3 - using the registry editing technique and changing the PRIORITYWHATEVER! registry node from 100 to 220
this was pure nonsense...doesn't work ...don't waste your time (though some report of success .. i don't know)
4 - factory reset ... NO .. don't lose your contacts for nothing
5 - reflashing Another Custom rom ..NO !
6 - Ok just the ones above
Now what to do then
two options and i suggest the second one..
1 - instal the Deuch t-mobile official rom that updates your phone's touch driver from v63 to v69 (you gotta turn the thing on holding down volume and lock button to enter the chamber of secrets).so that worked actually ...at least for a period of joyful time ! but after 5-6 months again..Mine went zombie on me...so obviously those deutche people's ROM isn't good for a long-term relatioship...
(if you wanna go that route ... Check out This Thread )
2 - some carzy idea came upon me to instal this rom that ONLY instals the 63 touch driver AGAIN on my device..i was shocked to see that you can actually downgrade the touch driver that easily (from v69 down to v63) ... and it worked..thank god it worked like a charm..but i give you the caution...although it's just a touch driver rom (?) for like 1 MB but it resets whatever rom you have in your phone..I think that's worth it ..isn't it ?
and the best part of this is that even if the phone plays games on you again .. you hit it with that new v63 taser you got there
now go get'em tiger
The driver file is attached.. additionally you have to put it in a folder with an advanced rom update utility.exe file beside it and rename it ro MOZAIMG.nbh to commence the procedure of updating ...Having a phone with custom rom and HSPL is very helpful here no doubt
Click to expand...
Click to collapse
where did you get the driver , i have same issue on surround , can you provide me with the touch driver ? thnx
can u plz find touch drivers for htc mondrain(surround) coz we too face the same touchscreen problem and dont have any soln.yet
So I tried this touch driver from vista_66. The instalation by advanced rom update utility.exe is the same as if you instal some ROM, but of course much more faster because the driver is only 80kB. But for me, without any success. It´s still the same, maybe worst. But I upgraded the ROM too (from Nextgen+ to Dynamics V2), so maybe it is because of the rom. But finally, this touch driver did not help...i´m starting agree with the users, which says "It´s a hardware problem".
P.S. How can I know, which touch driver I have?
ranajee27 said:
thanks for your sharing but i dont understand your these words
((((but i give you the caution...although it's just a touch driver rom (?) for like 1 MB but it resets whatever rom you have in your phone..I think that's worth it ..isn't it ?)))))
what you mean by that? do you mean the rom will become like a stock rom? plz explain it
Click to expand...
Click to collapse
Well it's a lil tough to explain..but I what i meant was
A) the Touch driver is not actually a rom but the mobile device treats it as if it's a rom And you have to instal it just like a rom
B)When You Do instal The touch Driver Your device Goes back to The factory default state of whatever rom was installed before the touch driver..
So make sure to get a backup of your data if they're important to you.. i hope you get it fixed asap !
gaggag said:
So I tried this touch driver from vista_66. The instalation by advanced rom update utility.exe is the same as if you instal some ROM, but of course much more faster because the driver is only 80kB. But for me, without any success. It´s still the same, maybe worst. But I upgraded the ROM too (from Nextgen+ to Dynamics V2), so maybe it is because of the rom. But finally, this touch driver did not help...i´m starting agree with the users, which says "It´s a hardware problem".
P.S. How can I know, which touch driver I have?
Click to expand...
Click to collapse
gaggag
Are You sure You installed it correctly ...
look ... you have too turn off the device ..then hold down the volume down button and turn on the device.. wait a while til it goes to the red -green-blue sceen... there You can see the version of touch driver written down ... is it v63 or v69 ?
Down there You should see The tag SERIAL ... IF you connect the phone to pc AND You have windows mobile device center software installed on your pc it change to USB ..only then you can click on rom update utlity.exe else it doesn't work
(Though i think you walked these steps correctly)
I suggest you try the first method too ... instal the deutch t-mobile rom with the link i provided ... i think that might work
p.s.
by the way dynamics is a really crappy rom ... nextgen was cool but it didn't release for for windows phone 7.8...
I just installed deepshinig v7 which supports 7.8 and i was amazed by how smooth and fast it was !!.plus it has a really really good homebrew devstore
Jimmy110
I Found it through google and Mozart Forums ... Do a Search in Surround Forums and i'm sure you find the touch driver
l27_0_0_1 said:
Do I need a hspl to do the second method?
Click to expand...
Click to collapse
I don't think so.. Because it has nothing to do with your rom ( your rom stays the same after installing the driver)
You can give it try and see if the phone gives you the permition to update the driver.. I think it does
htc-me said:
Hi, i'm still new to windows phone, its really refreshing to use apart from the lock screen bug. The only way I can use the phone from the lock screen is to start up the camera app and then back out to the homescreen. The phone works fine and is responsive but when I try to wake the phone from sleep the touchscreen does not respond. My phone is completely stock and has not been modded at all. I have rooted and flashed radio's and roms on android but I'm a little worried about messing with windows. Can you provide a step by step guide please? The forums here are excellent but a little difficult to navigate for a windows noob...
Thanks again...
Click to expand...
Click to collapse
Hey There..
congrats on your new phone ... i hope you can fix this issue as soon as possible
I edited the main post a little so it's noob proof now !
You can follow the steps and check if it works out ...
Since you're just updating the touch driver of the phone i don't think i would mess up the phone ( or void the warranty )
will try it
vista_66 said:
gaggag
Are You sure You installed it correctly ...
look ... you have too turn off the device ..then hold down the volume down button and turn on the device.. wait a while til it goes to the red -green-blue sceen... there You can see the version of touch driver written down ... is it v63 or v69 ?
Down there You should see The tag SERIAL ... IF you connect the phone to pc AND You have windows mobile device center software installed on your pc it change to USB ..only then you can click on rom update utlity.exe else it doesn't work
(Though i think you walked these steps correctly)
I suggest you try the first method too ... instal the deutch t-mobile rom with the link i provided ... i think that might work
p.s.
by the way dynamics is a really crappy rom ... nextgen was cool but it didn't release for for windows phone 7.8...
I just installed deepshinig v7 which supports 7.8 and i was amazed by how smooth and fast it was !!.plus it has a really really good homebrew devstore
Click to expand...
Click to collapse
Thanks. I tried it and yes, I have TOUCH C1(v63), so I flashed the driver correctly. As I wrote last time, without any success. I think, that trying the first method (deutch t-mobile rom) is waste of time. In my case, I´m sure it's a hardware problem.
And you are right, I am not happy with the Dynamics rom, but it doesn´t matter. I will sell the phone, because touch bug is getting worst and worst, sometimes I couldn´t answer calls, so it´s unusable for me.
It´s my second phone from HTC (first one was HTC MTeoR). Both of them were really bad made, with bugs and a lot of problems. No HTC anymore, sorry.
I hope that others will have more luck than me.
Flash error write [226]
Nice..... it works!!!!
Thank you....
now all I need to find out is how to install a custom rom.... I'm on orange uk stock rom, many of the other threads are old as I'm a little late to the party.
Any ideas?
Thanks again.
hakmed said:
Flash error write [226]
Click to expand...
Click to collapse
Me too
Ive opened this thread coz many people are finding my tutorial usefull
so here goes and if it helps let me know and give me a thanks
Hi i was new to all this and installed dynamics v2.0 fully unlocked rom the other day and this is how i went about it
download this
RUU_Mozart_Orange_UK_1.24.061.35_Radio_5.50.09.18_22.24.50.09U
http://www8.zippyshare.com/v/48117282/file.html
this is a load your phone back to 1.24
to install it i did this
turn phone off hold down volume down and turn phone on you should go to the bootloader screen then plug in your usb cable to the pc,
then on the white line at the bottom on phone screen should say usb instead of serial but maybe it will need to install some drivers cant remember 100%
when it is ready open that file and click the RomUpdateUtility.exe and follow the steps in that then you will have your phone back to 1.24
next you can follow this post here and download the attachment at the bottom named DFT_XSPL_WP7FG1.rar this what u need for this step
http://forum.xda-developers.com/showthread.php?t=1195647
basically this is the install procedure u may need to install active sync (XP) or windows mobile device center (vista and 7) but i did not have to my phone automatically did this
DFT_RSPL_WP7FG1_LAUNCH allows you to load RSPL on the device:
1. Extract ALL files from RAR archive.
2. Run DFT_RSPL_WP7FG1_LAUNCH (with administrative rights to access USB)
3. Mindfully reads information text. Press “Next” button.
4. Reset your device and hold “Volume Down” button during reset to enter OSPL mode.
5. Connect your device to PC via USB cable.
6. Now you may need to install proper USB drivers. They come with Active Sync / Windows Mobile Device Center.
7. Install drivers if required.
8. Make sure device show “USB” at the bottom instead of “Serial”.
9. Press “Next” button in the wizard. It should detect your phone.
10. If you are using WCEUSBHS driver under Windows Vista/7 (for MTTY or MAGLDR TTY for example), you should apply “Windows XP compatible mode” in the properties of EXE file to get connection.
11. After successful connection it should show device codename and allows to choose installed OSPL version.
12. You should look at the screen and select OSPL version in drop down list box. You need do this because it’s not possible to detect installed version via USB.
If your current SPL version doesn't present in the list, you can choose nearest version,
BUT ONLY IF IT HAS SAME FIRST NUMBER!!
Example: You have 4.XX on the device. Do NOT choose 1.XX 2.XX 3.XX.
13. Press “Next”. Wait until comes final page.
14. Read and close window
15. Look at the device – it must reboot to RSPL.
16. If you see RSPLX.Y.Z and “CotullaRSPL” on the screen – the task done! Otherwise, please report in this thread about your problems.
17. Put some feedback in this thread for community and developers.
Installing HSPL
DFT_HSPL_WP7FG1_INSTALL allows you to install HSPL on the device:
1. Launch RSPL on the device like described above.
2. Be sure that you close RSPL wizard window.
3. Run DFT_HSPL_WP7FG1_INSTALL.exe (with administrative rights to access USB)
4. Mindfully reads information text. Press “Next” button.
5. Proper drivers already must be installed in RSPL step.
6. Press “Next” button in the wizard. It should detect your phone.
7. If you are using WCEUSBHS driver under Windows Vista/7 (for MTTY or MAGLDR TTY for example), you should apply “Windows XP compatible mode” in the properties of EXE file to get connection.
8. After successful connection it should show device codename and allows to choose HSPL or OSPL version to install. OSPL means you install stock SPL back.
9. Check device codename, if something wrong turn off computer and run to the nearest forest. Grab some water with yourself.
10. Press “Next”. Wait until comes final page.
11. Device will reboot and start to boot OS.
12. Reset it and enter SPL mode again. Be sure there HSPLX.Y.Z and “CotullaHSPL” appear.
13. Put some feedback in this thread for community and developers.
Now u are ready
you can find what custom rom you want i used dynamics v2.0 which can be found here and its fully unlocked aswell so all i all im pleased with it
http://forum.xda-developers.com/showthread.php?t=1520352
download it and install the same way we installed the 1.24 rom in the begining of this post
turn phone off hold down volume down and turn phone on you should go to the bootloader screen then plug in your usb cable to the pc,
then on the white line at the bottom on phone screen should say usb instead of serial
when it is ready open that file and click the RomUpdateUtility.exe and follow the steps in that and then you will have loaded your desired custom rom onto your phone
I hope this helps some of u out and happy modding
best regards
steve
1.24
Great guide thanks, my phone is network unlocked do you know if that will revert once upgraded? also you mention rolling back to 1.24 what does 1.24 mean,and how do i find out if my device is on 1.24 already? one last Question how are you finding the rom any issues with it?
cheers
Geoff
geofferz said:
Great guide thanks, my phone is network unlocked do you know if that will revert once upgraded? also you mention rolling back to 1.24 what does 1.24 mean,and how do i find out if my device is on 1.24 already? one last Question how are you finding the rom any issues with it?
cheers
Geoff
Click to expand...
Click to collapse
1.24 im refering to the SPL you can find your version by turning the phone off holding volume down and power button and u will see your SPL at the top,
im not sure about the unlocked sim/network im new to all this aswell maybe do a search on the forums and see if you can find the answer, but i dont know this 1 sorry :/
rom is good no issues had a cable issue yesterday that wouldnt let me charge my phone but thats down to my dodgy cable
you dont have to install this rom you can use any custom rom you like or might find out there
anyways hope this helps
Launch RSPL
Thanks a great help.. ok to use to add tunes via zune? last bit on installing the custom Rom, what ruu option do I choose?
Cheers
hehe the first stage 1.2 spl.. when I open the rom update it gives a error 208? the update utility cannot open the requested file? any ideas and do i have to down to 1.2?
edit..Windows Mobile Device has been installed but when I open it, its not connected!! I powered of the phone with volume down. I can see the spl and usb at the bottom and it installed usb drivers etc, Im I missing a driver?
thanks once again
geofferz said:
hehe the first stage 1.2 spl.. when I open the rom update it gives a error 208? the update utility cannot open the requested file? any ideas and do i have to down to 1.2?
edit..Windows Mobile Device has been installed but when I open it, its not connected!! I powered of the phone with volume down. I can see the spl and usb at the bottom and it installed usb drivers etc, Im I missing a driver?
thanks once again
Click to expand...
Click to collapse
hi u don't need to worry about mobile device center this never picked up my phone either until I installed the custom rom
Don't ask why I've no idea
So what's happening when you press volume down and power you are seeing the multicolored bootloader screen right?
If so I don't know why the rom won't install for you
Maybe I've heard your firmware is at .707 if so you need y cables and its harder to downgrade your sol
tell me the firmware version please and ill try help u its in settings then about then advance on your phone if I remember
Oh also do not extract the 1.24 from the .rar file run everything from there
This is why ur getting that error I think
geofferz said:
Thanks a great help.. ok to use to add tunes via zune? last bit on installing the custom Rom, what ruu option do I choose?
Cheers
Click to expand...
Click to collapse
you dont need to select a option just load ROMUpdateUtility.exe
ive just downlaoded and reinstalled the rom myself to try see what u mean and i dont get this option
when you go to bootloader screen on your phone and it says usb open the rom file and click ROMUpdateUtility.exe
now dont open active sync or mobile tools as it says on the program information
just click the tick boxes and continue through the process
maybe try download the rom again found this
ERROR [208] : FILE OPEN
ERROR [210] : FILE READ
These error messages indicate that RUU lacks certain important files and cannot continue with the update. Please get the complete RUU package again.
but like i sed i have downloaded the file myself and it is working for me without any problems
beany2009 said:
hi u don't need to worry about mobile device center this never picked up my phone either until I installed the custom rom
Don't ask why I've no idea
So what's happening when you press volume down and power you are seeing the multicolored bootloader screen right?
If so I don't know why the rom won't install for you
Maybe I've heard your firmware is at .707 if so you need y cables and its harder to downgrade your sol
tell me the firmware version please and ill try help u its in settings then about then advance on your phone if I remember
Click to expand...
Click to collapse
Thanks for the help.
My firmware is 2250.21.40600.61,hope I don't need y cables for this version..
I see the multi coloured screen, and once plugged in to my pc it says usb at the bottom..
Strangely the 1.24 rom update works sometimes and not others, can you remember when you do done it, did it tell you want version currently on? because it didn't for me, I pressed next until update screen and was on 0% for bout 6-7 mins, my phone also displayed the same, how long did it take roughly
As regards to the Dynamics rom update.exe ( I opened with no phone attached ) It says welcome to the advanced rom update utility for Htc Mozart below that are, two ruu options.. regular (this is default) and below is custom I was thinking or using logic that I don't think i have hehe.. that the custom would be the option? or leave it
I really appreciate your help on this, I have installed many custom rom on android,but this windows phone grr annoying but I wont give up.
geofferz said:
Thanks for the help.
My firmware is 2250.21.40600.61,hope I don't need y cables for this version..
I see the multi coloured screen, and once plugged in to my pc it says usb at the bottom..
Strangely the 1.24 rom update works sometimes and not others, can you remember when you do done it, did it tell you want version currently on? because it didn't for me, I pressed next until update screen and was on 0% for bout 6-7 mins, my phone also displayed the same, how long did it take roughly
As regards to the Dynamics rom update.exe ( I opened with no phone attached ) It says welcome to the advanced rom update utility for Htc Mozart below that are, two ruu options.. regular (this is default) and below is custom I was thinking or using logic that I don't think i have hehe.. that the custom would be the option? or leave it
I really appreciate your help on this, I have installed many custom rom on android,but this windows phone grr annoying but I wont give up.
Click to expand...
Click to collapse
lol np mate ill try help as best i can
right i understand your bit now about the dynamics rom u need to select regular on this part
custom i think would be if u want to edit it or some **** but i have no idea so u use regular mate because this is the actual rom file made but remember u must downgrade and load rspl and hspl onto your phone before doing this step
right my firmware is 2250.21.51301.401 but i dont know if this changes on installation of the downgrade and adding the custom rom like i sed im a complete noob with this myself but all went smoothly for me thats why i made the tutorial
and no mate my phone took about 5-10 mins to install the 1.24 orange rom
have u tried a hard reset first and then see if it helps with the installation
ill search around for your firmware and see if there has been issues
edit..........................................
did a search on the forums and your firmware comes up with nothing :/ did a google and only shows this thread did you type the numbers correctly?
also you mean that the rom update works sometimes and not others?
if it works once it should install it mate np's
When you load you phone into bootloader the multicoloured screen can you please type here what u see mainly the top letters and numbers
beany2009 said:
When you load you phone into bootloader the multicoloured screen can you please type here what u see mainly the top letters and numbers
Click to expand...
Click to collapse
again thanks for your help
ok here goes red: PD 67100 ss-BC (4k)
SPL-4.6.2250.0(129193) mng
what you think?
i think my SPL was on that before so i dont know why u are having issues mate :/
maybe wait and see if a developer can read this and give us some info on why its not working for you :/
Thanx For The Help And the Tutorial It Was very Helpfull
Now my phone Is running dynamic 2.0
hey can u tell me what other custom roms are available that i can install on my phone and if there are any different methods of installing them
no problem mate glad it helped
erm the only other custom rom i have seen on mozart is deepdishing v7.0 you can find this in the development thread inside mozart topics
and for me mate im not sure and have not seen another way of installing another custom rom but im new to all this myself
anyway glad this helpped
regards
my computer wont pick up htc 7 mozart in bootloader
can anyone help me its doing my head in .
when you connect your phone to pc in bootloader its not showing as usb on the bottom of bootloader screen?
just serial?
just to confirm. this wont work on Asian handsets.
beany2009 said:
Ive opened this thread coz many people are finding my tutorial usefull
so here goes and if it helps let me know and give me a thanks
steve
Click to expand...
Click to collapse
Thx for the easy to follow guide.
It worked on a telstra brand mozart using windows 8.
Sent from my GT-N7105 using Tapatalk 2