[img=http://img444.imageshack.us/img444/2017/dscn1600br9.th.jpg]
you will need
microsoft activesync installed on your windows pc
download ubrhurricane.rar from rapidshare HERE (link dead use this one)
http://www.megaupload.com/?d=JLO5H1L7
unrar this to your desktop.
to unlock go to the unlock folder and copy the cert.cab file to your phone using activesync and run the app from your phone. if your phone wont run the file then use the SDA_applicationUnlock.exe.
in the unlock folder you will find SPVServices.exe click SIMLock Tool and let it do its magic, after this click CID Tool. This will set your phones CID to 1111...
your phone will now be unlocked
we will now patch the ruu,
you will need to turn your phone off and hold the camera button whilst putting the usb into the phone. this will turn it on and show you a three colour screen. go to the spl folder use Patched_RUU.exe to flash your phone, after the bar has reached 100% you can unplug the phone. and turn it off.
now, use as.exe to kill microsoft activesync and then double click on MMTY142.exe this is what we will be using to flash your phone.
do the same thing we did before, hold the camera button and it will show you a 3 colour screen. but this time it will say
need an I U(0)?
make sure you select Y. (youwont see a N) you might need to do this a few times to get it right.
click the usb button and then it will show you a terminal which you will then type:
info2
this should tell you that your phone is SUPERCID (if it isnt then go back and unlock again otherwise the rest wont work)
now type
format BINFS
after that you will then need to tell them where the rom is, we will be using 413.bin which is selang09's wm 6.1.
type in
l c:\thefilepathtoyourdesktopgoeshere\ubrhurricane\413.bin
this will then flash your phone and you can turn it off after it says its complete. if this fails then just try it again its probally because you didnt get a Y at need an I U(0)? )
you can reboot and you will see your phone with wm 6.1 when it boots up it will be in the chinese language. this can be changed by pressing start, 6, 0, 2 and then select US English.
install t9 english.cab using activesync onto your phone to sort out the chinese keypad.
you will now have a working wm6.1 in english with an english t9.
at the moment selang09 413 wm6.1 rom is the best i have used. its VERY RELIABLE.
htc hurricane 4 ever
ps, use www.skyfire.com
Link not valid anymore.
Could you reupload ubrhurricane.rar
http://www.megaupload.com/?d=JLO5H1L7
sweet! just flashed it yesterday and it seems to be working fine.
I'm glad to see someone is still active in this part of the forum. been awfully quiet around here lately.
Hello, what other languages are there in the ROM? Any known problems?
only chinese and english mate, no problems. do rember to install the english t9 or one for your own language. everything works cheers.
Unlockable
I just get "phone is unlockable" message when trying sda_applcationunlock.exe.
On an orange UK g only sim c550 with vista and active sync active
Tried on XP and vista.
Anybody any thoughts appreciated.
are you sure you have copyed the cab file to your phone and its executed? then run the exe..?
is it a chinese rom?
hey guys, now i am tried 3 diffrent roms and always it is in chinese is it right.
may i change the language or do i need an english rom?
how can i change the language?
where i can find an english rom?
thanks a lot
lessew
ubrdave said:
click the usb button and then it will show you a terminal which you will then type:
info2
Click to expand...
Click to collapse
Hi there, i think there's meant to be a space between 'info' and 2,
e.g. "info 2"
cheers!
Definitely a space between info and 2
Couple of other little things that might be worth editing in your fine original post...
do the same thing we did before, hold the camera button and it will show you a 3 colour screen. but this time it will say
need an I U(0)?
make sure you select Y. (youwont see a N) you might need to do this a few times to get it right.
Click to expand...
Click to collapse
You might want to make ultra clear that we need to press 0/zero at this point, I was stumped for a while, tried pressing every key...
click the usb button and then it will show you a terminal which you will then type:
Click to expand...
Click to collapse
You might want to clarify this is the USB button in MMTY142, as I saw USB in the bottom left corner of my phone, and kept trying to press the left soft button instead.
Finally, to reassure people that nothing is wrong, they will need to restart after selecting US English as the language, for all menus to not show Chinese any more.
Thanks a lot for putting the guide together, I've had to go back to my C550/Hurricane after I cracked the screen on my Kaiser - I was getting annoyed with so few new/useful apps working on WM2003SE / pre-NET CF3, and had still had a backup-backup phone in the form of my SE K700, so decided to give WM6.1 a shot. Off to try and install PockeTwit now
Hi, my phone totally dies before I ran the Patched_RUU.exe; it just don't turn on or do anything else. Can you tell me something to bring it back?
Sorry, I don't know the answer, but others may find it useful to know if your phone won't enter the three colour screen, OR just won't turn on normally?
Just to confirm, what happens if you hold down the camera button on the side, then connect a (known working) USB lead between it and your PC? And if you connect your phone to a mains charger, does the orange LED light up to indicate charging is taking place? Any other previous symptoms with this phone?
SilentlyScreaming said:
Sorry, I don't know the answer, but others may find it useful to know if your phone won't enter the three colour screen, OR just won't turn on normally?
Just to confirm, what happens if you hold down the camera button on the side, then connect a (known working) USB lead between it and your PC? And if you connect your phone to a mains charger, does the orange LED light up to indicate charging is taking place? Any other previous symptoms with this phone?
Click to expand...
Click to collapse
Hi;
The phone is totally dead (No three colors screen, no ligth on, no nothing).
If I hold down the camera button on the side and then I connect a (known working) USB to the PC; guess what... yes! Nothing Happens!
If I connect the phone to a main charger then the orange LED light up.
If I remove the battery and then put it back again and try to turn it on the LED light up in red (it blinks just once).
Could anybody help pleeeeeease!!!!
THX
Hi,
I have a problem with the flash:
After "info 2" I get this:
Cmd>info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
CMD55 failed
HTCSSuperCID ' HTCE
And then nothing happend with "format BINFS"
What's the problem? I did something wrong? I tryed again with the unlocking procedure but it happened everytime!!
PLS HELP GUYS
You sure choose "Y" when you've been asked for UI interface.
You sure unkock your hurricane I'm mean Sim, Cid, SDA Applicattion.
Hi,
Yes I did! I used the spv tool for it, but no way to pass the "info 2".
Why?!?
Help Please
info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
***** user area size = 0xF400000 Bytes
HTCSSuperCID ' HTCE
Cmd>format BINFS
Format BinFS partition.
Format is completed!!
Cmd>l c:\rom.bin
clean up the image temp buffer at 0x8C080000 Length 0x01C40000
MTTYDownloadImage "c:\rom.bin"
:F=c:\rom.bin
start download
SHAddress 82040000h Length 02630000h
Before flashing new image , formatting old OS is completed!!
Start flashing new image!!!
*checksum = 0, skip checking
OEMFlashWrite(82040000h,8C080000h,01C00000h)
Update BINFS offset 0x00000000 length 0x01C00000 ...
WBinFS D=0x0 L=0x1C00000 CS=0xD3D7666A
WBINFS from S 0 l=29360128 57344 SS
ReadB A=0x0 L=0x1C00000 CS=0xD3D7666A
Update BINFS success.
2nd download dwVaddr=0x8C080000
*
Then it hangs for5 mins and mtty says about being idle for 5 mins? is it still flashing please can someone help thankyou
thanks for giving me a tutorial that help me
efficiently BRICK my hurricane in less then 2 minutes!
yay!
Followed instructions precisely..
after i did the "patched_RUU" update..
BRICKED.
bullshi*.
oraeanast said:
thanks for giving me a tutorial that help me
efficiently BRICK my hurricane in less then 2 minutes!
yay!
Followed instructions precisely..
after i did the "patched_RUU" update..
BRICKED.
bullshi*.
Click to expand...
Click to collapse
What an ungrateful & rude person you are. YOUR phone was bricked when YOU decided to try something on it. No-one forced you to attempt it.
As you may have guessed from other responses here, most of us have flashed this and other ROMs with no problem.
Is it definitely bricked? Have you tried various recovery techniques.
Have you previously tried asking for assistance in a non-confrontational manner, or even just asking for assistance?
Related
My xda 2 is stuck on the bootloader and wont do anything after trying to reset it ive tried i think everything that i can possible do and i read most of what was offered yet its still stuck on the bootloader. I tried to upgrade from v1.60.... to the latest at v1.72.187 uk o2 . Please help ><
Have you tried resetting your device, placing it back in the cradle and re-running the upgrade?
I have tried reseting but it fades then reappears disallowing me to run the upgrade 'Xda_II_172187_Final' but i have downloaded another which sizes around 512kb but this says that the rom image is not present. :/ can u link me to another upgrade if it may help
Shadow786 said:
I have tried reseting but it fades then reappears disallowing me to run the upgrade 'Xda_II_172187_Final' but i have downloaded another which sizes around 512kb but this says that the rom image is not present. :/ can u link me to another upgrade if it may help
Click to expand...
Click to collapse
Exactly which upgrades have you attempted? What happens when you run the XDA_II_172187_Final upgrade?
What is the 512kb upgrade you mention?
I used 'himaupgradeut_197.exe' after the 'Xda_II_172187_Final'.
'himaupgradeut_197.exe' was the 500kb file which gave me the error
that no rom image was found and the 'Xda_II_172187_Final' was the only 1 that i used to upgrade and that says it cannot connect to the device ...make sure its connected.
Shadow786 said:
I used 'himaupgradeut_197.exe' after the 'Xda_II_172187_Final'.
'himaupgradeut_197.exe' was the 500kb file which gave me the error
that no rom image was found and the 'Xda_II_172187_Final' was the only 1 that i used to upgrade and that says it cannot connect to the device ...make sure its connected.
Click to expand...
Click to collapse
The HimaUpgradeUt_197.exe file is not an upgrade it is a version of the upgrade program. It still needs to be used with all the other files that form part of the upgrade process.
As regards the connection error, make sure you are in bootloader mode (by pressing Jog button and Power button at the same time as pressing reset) before retrying the upgrade. Also make sure the USB cradle is plugged directly into a USB port on your PC and not through a hub and that the power supply is connected to the cradle. It may help to make sure that ActiveSync isn't running also, as it is not required for upgrading.
Isnt it already in bootload mode? if not i dont know where the jog button is Also i just realised i didnt have my cradle its own powersuplly which i have done just now but i dont want to carry on witht upgrade is there a way i can just make it back to normal ?
Shadow786 said:
Isnt it already in bootload mode? if not i dont know where the jog button is Also i just realised i didnt have my cradle its own powersuplly which i have done just now but i dont want to carry on witht upgrade is there a way i can just make it back to normal ?
Click to expand...
Click to collapse
It sounds like your device is already in bootloader mode - my suggestion is just a 'failsafe' The Jog button is the multi-directional button at the bottom centre of your device.
I don't think it is possible to 'go back' to normal as if you never did anything. With the power connected properly there is every chance an upgrade will now work. You can, of course upgrade using the original ROM version, if you know what that was.
hmm its still done a restart and yet it doesent seem to connect. When i restart the xda 2 its still in bootload mode when i place it in cradle still in bootload mode and i still get the same errors witht the upgrade ><
OK. This should work Can you try a different USB port? Failing that, is it possible to try another PC? I know about other users that had connection problems and tried a different PC and it worked OK.
Omg thank you i thought i lost it Thank you Very much i cnt thank you enough. ^^
For reference i switched the USB cable around and it worked ^^
That is great news
im facing another problem again...
this time i changed the file extension EBOOT0502_MNT_01.01.03.nbf to EBOOT0502_MNT_01.01.03.nb0
(file from HP official WM5 SP34074, inside the installed folder )
and copy to memory card and put in 6828 then started to go bootloader screen
few minutes later my screen goes blank, and i tried with the revive methods
which is
-press the 2 softkey " - " and reset button
-put in the battery ,
-release reset, then release softkey
but didt work out!!!!no repsponse at all..tried many times..possible dead ad???
plz help me abit ..big troblem!
p.s srry for my bad english
Did you rename it to eboot.nbo ? Have any files in root folder of your miniSD ?
Who make you try this way ???
i rename as i mentioned above with the long name only change the .nbf to .nb0
i also regret now coz cant even see anything from the screen >> althought tried reset eith all the mothod..
izzit my 6828 dead ad?
cant even repair by myself and have to send it back to hp for repair?
williamSun said:
i rename as i mentioned above with the long name only change the .nbf to .nb0
i also regret now coz cant even see anything from the screen >> althought tried reset eith all the mothod..
izzit my 6828 dead ad?
cant even repair by myself and have to send it back to hp for repair?
Click to expand...
Click to collapse
If you don't rename to eboot.nb0 => Your device didn't flash it => Your device not dead. Have another files in the root folder of miniSD card ? List for me!!!
--Try this way :
Press both softkeys (two "-" keys) and remove battery then insert battery again (don't unpress two softkeys) and softreset, wait 2-3 seconds. It'll go bootloader mode. You can flash your device again.
hmm, tried u way ad didt make it to boot screen..>.<
in case i rename to eboot.nb0 >>i not really sure<<
>>izzit case sencetive?
>>izzit 6828 dead??
williamSun said:
hmm, tried u way ad didt make it to boot screen..>.<
in case i rename to eboot.nb0 >>i not really sure<<
>>izzit case sencetive?
>>izzit 6828 dead??
Click to expand...
Click to collapse
What is your current bootloader, 1.01 or 1.05 ?
If you follow that menthod but it didn't go to bootloader, your bootloader was dead.
You can send it to HP to repair, or try this way : http://wiki.xda-developers.com/index.php?pagename=DeadBoot
I recommend to sent it to HP.
while the PDA is still can open and bootloader screen
is 1.01
and im trying to use the EBOOT0502_MNT_01.01.03.nbf which found in the
HP official RUU PC flash ROM
and rename to EBOOT0502_MNT_01.01.03.nb0
then put in the root of memory card
then start to flash ..
now the PDA wouldn't reapond to any button HR, SR, soft-key + reset ...etc
only can charge and orange LED indicated
williamSun said:
while the PDA is still can open and bootloader screen
is 1.01
and im trying to use the EBOOT0502_MNT_01.01.03.nbf which found in the
HP official RUU PC flash ROM
and rename to EBOOT0502_MNT_01.01.03.nb0
then put in the root of memory card
then start to flash ..
now the PDA wouldn't reapond to any button HR, SR, soft-key + reset ...etc
only can charge and orange LED indicated
Click to expand...
Click to collapse
You was flash wrong bootloader due to make your device dead.
Now you need restore bootloader.
If you send to HP, they will replace board you must pay for it.
But you try the JTAG menthod to restore bootloader it'll make your warranty expired.
thx for all ur answer, i really appreeciated.
btw, for sure hp center will replace a board in it and that will be expensive rite?
if i sent to other shop which is not HP official service, will they do the same?
izzit juz flash using tools they hv>?
and expensive?
Here is what I did ... might help you
Hi
Make sure your phone is powered, it would be wise to charge the phone via AC power at least for 1-2 hours before you try to install anything.
I finally managed to install WM6 on my HP ipaq rw6828. But it wasnt easy, it took me 1 full day to get it installed. Just to help other people who are installing this, here is my experience -
What all I did and how I finally got there -
1.
Tried to install it via PC. When I already had a higher version of the Bootloader installed. Best way is to install it via 1GB mini SD card.
2.
After reading other posts I managed to downgrade the bootloader to version 1.0.1 (not sure of the version number...but its the version you get after installing the HP SP34074).
3.
Once I managed to downgrade. I got into the Bootloader mode on my device( its pretty simple to get into BL mode, make sure you ask someone to help you with it, its easier with two people, to get into Bootloader mode - a)press the two "-" buttons on the phone together. b)While the two "-" are pressed have a second person remove the battery. c) Wait for a few seconds and ask the person to insert the battery back. d)Once the battery is in place ask the second person to use the stylus and push into the soft reset hole (its hole on the left of the USB connecter on the phone). e) Wait for a few seconds and then phone should go into the BL mode. f) release the two "-" buttons after it enters the BL mode. Sometimes for me it entered the BL mode after I released the "-" buttons also. But dont release the "-" buttons till you have pressed into the hole with the stylus.
4.
With my phone now in the BL mode and showing the older version 1.0.1 (not sure but it should not be 1.0.5) I clicked the Device Software Update Utility.exe. I got the screen where you get a combo/dropdown with "ALL" pre-selected. The install step clearly says choose "OS" only and not "ALL". But I made a mistake here, for some reason using the mouse I didnt see any other option in the dropdown accept for "ALL". so I selected ALL and did a next. The setup kicked in and I got different screens showing status of install. But on the final screen it got stuck at 6% and stayed like that for well over 6 hours...I didnt touch the install as the instruction clearly say not to disconnect or stop the exe. But after 6 hours I realized that something is wrong and i killed the Device Software Update Utility.exe file.
5.
I did a soft reset on the phone and to my surprise after a while it loaded WM6....but that was it. Has the install failed in between the WM6 on the phone was totally screwed up...nothing worked properly. I coudnt even get ActiveSync to recogonise my device or connect to it.
6.
I tried the whole sequence mentioned in step 4 again but no luck now Device Software Update Utility.exe would error out I assume it could be because of the BL version 1.0.5. So I thought let downgrade and install the older BL version....but with no active sync i coudnt downgrade the device.
7.
Then i read somewhere SD card boot method to copy the EBOOT0908_MNT_1.00.05.nbf from the SP34074 and rename to eboot.nbo. This didnt work either, am not sure if I renamed the file correctly to .nbo(Orange) or .nb0(zero). Well I dont know whats correct eboot.nbo or eboot.nb0. But since this step didnt work. I was really upset as I felt I was stuck...then GOD had mercy on me and I did something which simply worked ...
8.
I took my mini SD card out connected to my Laptop in the SD card slot with the SD adapter. Did a quickformat to clean it up...if you have data its a good idea to back up the SD card in a seperate folder.
9.
Now I had a clean SD card with no files I downloaded the 1.0.5a (for 68x8) for miniSD. I copied the diskimg.nb0, size : 64,000 KB to the SD card root folder.
10.
Since I was trying the SD card method, I connected the mobile to AC power instead of the PC just to make sure I had enough power for install.
11.
I popped the SD card back into the phone. Removed the phone battery. Then entered into the Bootloader mode (refer to step 3 for getting into BL mode). Well nothing seemed to be happening...but I decided to stay on the BL mode .... to my surprise after 10-15 min i got a message asking my reset and goto factory mode. I wasnt sure if it was asking me to do something or was just a message. While I was wondering...the phone restarted automatically and it loaded WM6 ..asked me to do the tap thing to configure like the initial factory setup .. after all this I poped my SIM inside. Connected the phone to my PC. Active Sync finally recognized my device and synched everthing. Now everything WORKS!!! Though there are some issues like the camera flash doesnt come on.. etc but more or less everything seems to work. I havent tried other applications like email SMS wifi bluetooth etc.. I will post soon my experience weather all main applications work without a glitch...but am so happy my patience paid off..
Thanks to nhocbanme for WM6 version for HP ipqa rw6828, my biggest mistake was not to properly follow steps listed by nhocbanme. For people trying to install WM6 on HP ipaq rw6828....please please use the SD card method...it works and takes less then 30 minutes...you can follow my steps 8,9,10,11 to have a trouble free setup.
Good luck
Amit Reddy
Hi... my bootloader is dead any I cannot locate the fin out to flash my ipaq rw6828... please tell me where exactly are the pin out for rw6828
Thanks you.
Hi WilliamSun,
if you can go to boot loader it mean you can repair your device. You should download WM5/WM6/WM6.1 ROM that design to flash via mini SD. you can download it from nhocbanme's or hellowordl1's thread, and flash your device again.
Good Luck.
HELP
my device is HP Ipaq rw6828.... i have this problems twice, but ican solve it, now i had a same problem.... now i can't resolve it....
now my device still (dead) only LED indicator when i charge it...... i use anything method, but it's not work.... except JTAG, cz i can't use this method.... please, any other way except JTAG mode????????? many big thanks.................. if u have an opinion, email me, [email protected]
in this case i cant solve my problem
downgrade with SP34074 from PC (like intruction on screen PC)
1. run SP34074 from PC
2. remove battrey from device for sec, and put back to device
3. connect the device via USB, n make sure the PC is respon that
4. follow the instruction in screen
its work for me
Hi, my son has bricked the phone (he play with mtty), NIKE do not power on (black screen and is not possible to go on color splash screen pressing camera+power key) when i try to connect to usb the computer ask me some drivers.
somebody can help me???
Thanks
Boscolo
OK
What have you done befor you get this error?
If the Green LED Light, you are in the OEMSBL. Search in the XDA for "OEMSBL" it discript the right drivers and what you can make with it! Have you use in the SPL the "Type 2a" command??
My son try to format the phone with mtty for install new rom. probably he make a disaster.
now the only thing works is the orange led when i connect to the usb port for charge.
if i try to connect by usb cable the computer serch for install new driver but i dont know what driver.
i ask if there is some possibility to do something.
thanks
Now i have the comunication from pc to the phone with Mtty for the driver i used QUALCOMM, the phone seems to be formatted how i can install the sspl-1.16-nike.exe (or other loader)?
Thanks to any can give me some solutions and sorry for my english.
ARGL
Tell your son ... he need to read all posts in a thread! "Type 2a" doesnt fix defekt marked clusters on qualcomm device. this is a reported error from kaiser!! this is why some spls doesnt support this comando!!! you can found a lot WIKI Entrys about this problem.
to fix it, you need talk with the user "jockyw" or read this thread -> http://forum.xda-developers.com/showthread.php?t=394584
he must know what Radio Rom Version you have! possible he must edit for you a special "Frankenkaiser" Version to provide a solution. if you need a special version, donate him! one thing ... jockyw is very busy!!!
thanks for reply but today the phone was send to HTC for reflashing.
ITS A HTC HD2 NOT THE ORIGINAL
Ok I am a really big noob and need some help. I Flashed My rom using Miri_HD2_WM65_21893_Sense25_V6.0.rar, I extracted in and it completed 100% and loaded up perfectly to home screen. I didnt have my sim card in or Sd card so I took battery out and put my sim card and sd card back in. When I turned it back on it was stuck on the HTC screen. Just the Green HTC writing and white screen and thats it. I have read some forums that have had the same problem but i just dont get it. they say get into bootloader ( which i can do) and then flash with radio or something... I am uncertain how to do this. When I downloaded one of them Customruu or whatever it is and open it it says I have to connect through active sync which i cant do because I cant get my device to turn On... I really need some help but it needs to be explain to me like explaining to a handicap person.
thanks
Put into bootloader, not necessary to connect to Activesync as you can't in bootloader mode. Flash the radio the same way as you flashed the rom. put the radio.nbh file in a folder, rename it to RUU_Signed.nbh and copy a CustomRUU.exe in and flash.
You'll find radios and steps here.
jaza20032000 said:
Ok I am a really big noob and need some help. I Flashed My rom using Miri_HD2_WM65_21893_Sense25_V6.0.rar, I extracted in and it completed 100% and loaded up perfectly to home screen. I didnt have my sim card in or Sd card so I took battery out and put my sim card and sd card back in. When I turned it back on it was stuck on the HTC screen. Just the Green HTC writing and white screen and thats it. I have read some forums that have had the same problem but i just dont get it. they say get into bootloader ( which i can do) and then flash with radio or something... I am uncertain how to do this. When I downloaded one of them Customruu or whatever it is and open it it says I have to connect through active sync which i cant do because I cant get my device to turn On... I really need some help but it needs to be explain to me like explaining to a handicap person.
thanks
Click to expand...
Click to collapse
hi had same thing myself just rename ruu_sined.nbh to leoing.nbh
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
where do I get the Customruu.exe from? What do you mean flash the radio same as the rom? how can i do that if i cant get connect to active sync? So does that mean I have to download Miri_HD2_WM65_21893_Sense25_V6.0.rar again? which radio file do I choose? I am so confused. Dont get annoyed its just i dont understand all this...
do NOT do it via SD card - flash the radio using activesync as mentioned in first reply. SD card is dodgy as hell and the quickest way to brick your phone for good
You can get CustomRRU from any ROM file - use the one from Miri's ROM
might've been worth reading the n00b flashing thread first as well as well as the first thread of Miri's ROM as all the info is on there...
how come you can't use activesync? what version of Windows you using?
in future i suggest you read the relevent threads and make sure you can flash a stock ROM before jumping into cooked ROMs...don't wanna brick an expensive phone do you?!?!
amma2005 said:
hi had same thing myself just rename ruu_sined.nbh to leoing.nbh
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
Click to expand...
Click to collapse
I can't use the SD card because I dont have the adapter thing to be able to hook it up to my comp only way i could access it was through my phone in hard drive mode. So basically i cant put any files on it without using the phone... Any other suggestions?
futher info from Miri's ROM thread...
"You MUST use radio 2.07.50.27 or 2.08.50.08"
read this thread...
http://forum.xda-developers.com/showthread.php?t=609477
all will become clear - or it should do!!
EddyOS said:
do NOT do it via SD card - flash the radio using activesync as mentioned in first reply. SD card is dodgy as hell and the quickest way to brick your phone for good
You can get CustomRRU from any ROM file - use the one from Miri's ROM
might've been worth reading the n00b flashing thread first as well as well as the first thread of Miri's ROM as all the info is on there...
how come you can't use activesync? what version of Windows you using?
in future i suggest you read the relevent threads and make sure you can flash a stock ROM before jumping into cooked ROMs...don't wanna brick an expensive phone do you?!?!
Click to expand...
Click to collapse
If you read my post I cannot get into the home screen... My Phone is stuck on the HTC boot up screen therefore making it impossible to use activesync... I did read all the Noob and Miri **** and it worked. I got to the new rom, but when i took the battery out and put sim card and sd card back in it is just stuck on the green htc screen and wont go past it...?????????
jaza20032000 said:
I can't use the SD card because I dont have the adapter thing to be able to hook it up to my comp only way i could access it was through my phone in hard drive mode. So basically i cant put any files on it without using the phone... Any other suggestions?
Click to expand...
Click to collapse
i would say buy one only cost about £5 to £10 uk pound
It just sounds like you've got the wrong radio on your device...
Turn off your phone, and turn it back on holding down just the down button. It will go into the bootloader screen (red green and blue one). You can then connect it to your PC and it should say 'USB' at the bottom instead of serial.
You can then run CustomRRU (found here: http://forum.xda-developers.com/showthread.php?t=575524) with the radio file from this link:
http://megaupload.com/?d=HT7ZMDGH
and it should allow you to flash the radio and work...(put both the CustomRRU app and radio file in the same folder)
EddyOS said:
It just sounds like you've got the wrong radio on your device...
Turn off your phone, and turn it back on holding down just the down button. It will go into the bootloader screen (red green and blue one). You can then connect it to your PC and it should say 'USB' at the bottom instead of serial.
You can then run CustomRRU (found here: ) with the radio file from this link:
and it should allow you to flash the radio and work...(put both the CustomRRU app and radio file in the same folder)
Click to expand...
Click to collapse
Where do I get jus the CustomRRU.exe..?? For miri?
Edit: Just read post again you included link in last quote, yes i know i am retard
I put a link for it in brackets (found here: ) - use your eyes!! lol
if you're not prepared to read what people put then don't ask for help
EddyOS said:
It just sounds like you've got the wrong radio on your device...
Turn off your phone, and turn it back on holding down just the down button. It will go into the bootloader screen (red green and blue one). You can then connect it to your PC and it should say 'USB' at the bottom instead of serial.
You can then run CustomRRU (found here: http://forum.xda-developers.com/showthread.php?t=575524) with the radio file from this link:
http://megaupload.com/?d=HT7ZMDGH
and it should allow you to flash the radio and work...(put both the CustomRRU app and radio file in the same folder)
Click to expand...
Click to collapse
I am using a HTC LEO (HD2) with EnergyROM installed in it. Now I was tryin to flash updated version (11th march update), But I am having trouble with Activesync which somehows is from last few weeks. It connects & syncs the device too once USB is plugged in, But disconnects when I try to flash a rom using customRUU..It gets disconnected on the bootloader screen & activesync status turns to Disconnected from Connected..I pull out my battery & restart the device again. This is highly irritating & I wish if there's some other program instead of Activesync that could be used to flash a rom.
I tried doing it with bootloader screen, Turning the device off, then turning it on while pressing down the volume button, It sure goes into bootloader screen, but shows Serial at the bottom & not USB..So any ideas for what could be the alternative for people who face the same problem with activesync, Instead of wasting time to rectify this error, Its better to find some other alternative. My PC is running Windows XP 32 bit, I re-installed my windows when i had trouble almost a month back & activesync worked fine then, But just can't afford to do it every other week or so
????
amma2005 said:
hi had same thing myself just rename ruu_sined.nbh to leoing.nbh
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
Click to expand...
Click to collapse
when i do this hd2 says NOT ALLOW What should i do??
sbugra said:
when i do this hd2 says NOT ALLOW What should i do??
Click to expand...
Click to collapse
Flash via pc
ClydeB1 said:
Flash via pc
Click to expand...
Click to collapse
done it. thnx
vicky_crispy said:
I am using a HTC LEO (HD2) with EnergyROM installed in it. Now I was tryin to flash updated version (11th march update), But I am having trouble with Activesync which somehows is from last few weeks. It connects & syncs the device too once USB is plugged in, But disconnects when I try to flash a rom using customRUU..It gets disconnected on the bootloader screen & activesync status turns to Disconnected from Connected..I pull out my battery & restart the device again. This is highly irritating & I wish if there's some other program instead of Activesync that could be used to flash a rom.
I tried doing it with bootloader screen, Turning the device off, then turning it on while pressing down the volume button, It sure goes into bootloader screen, but shows Serial at the bottom & not USB..So any ideas for what could be the alternative for people who face the same problem with activesync, Instead of wasting time to rectify this error, Its better to find some other alternative. My PC is running Windows XP 32 bit, I re-installed my windows when i had trouble almost a month back & activesync worked fine then, But just can't afford to do it every other week or so
Click to expand...
Click to collapse
It's not possible to connect to Activesync while being in the bootloader mode (The hd2 says "USB" on Windows without activesync too), so it has nothing to do with Active sync. Try another USB-Cable or use the sdcard to flash (see amma2005's Post, but as far as I know, there is no need to format the card again).
amma2005 said:
hi had same thing myself just rename ruu_sined.nbh to leoing.nbh
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
Click to expand...
Click to collapse
Great advice mate.
Been a rom junkie for weeks, bouncing around several releases to find the one.
turned towards Dutty, flashed and got a wihte screen for my trouble. Followed your advice and now running CDLC V2 "dutty" without a hiccup.
eng.mohammad said:
Dear Friend;
i faced the same problem and thanks my ALLAHH, i found that the connector copper pin that connect the battery with the phone is not in its right direction so i used my hand to redirect it to can connect with the battery
Click to expand...
Click to collapse
Hi. Can you help with this? or anyone?
leo70 said:
Hi. New here. Done this magldr 1.12 and leo70 rom but my phone playing up badly after a lot of droid and 6 and other flashes. I can't install hardly any rom any more without it - ie: stock, wm6, android, wp7 rebooting constantly for no reason etc.
Done mtty and have bad blocks - about 16 and 16 reversed. done task 28 and task 28 55aa, and task 29 as read in other threads. tried everything with different radios, different nand droid. multiple wp7-hd2 installs. but still reboots.
Any thoughts? If go back to stock+spl1.66 and send back under warranty anyone know/think if they will fix it and/or replace it? they still have old sealed replacement hd2 stock or boards much? do they do diagnostics and look at bad blocks properly on warranty return? Even on stock-rom and stock-spl still does this reboot although not as much. Worried that stock-rom wm6 will "work" too well and they won't check blocks. What about task2a? etc? Any way to install wp7/magldr and partition right so no bad blocks counted in?
Thanks very much.
Will pay for fix that works - $.
Click to expand...
Click to collapse
I am stuck on DFT boot screen after hspl, htc, magldr- for windows phone 7 on hd2. Sometimes get thru to windows phone 7. but generally reboots. Done spl back to stock and leoimg on sd back to stock and tried task28s, 29s, etc but just reboots constantly and randomly.
Any thoughts here? What is warranty process? DO they replace at all with NEW? or new BOARDS/RAM? Gone back to 1.66 spl and sent in for repairs. because - the stupid recommended Romupdateutility HTC stock rom 'upgrade' did this damage.
and yes, was Windows Phone 7 and activated with marketplace & xbox/live.
leo70 said:
Hi. Can you help with this? or anyone?
I am stuck on DFT boot screen after hspl, htc, magldr- for windows phone 7 on hd2. Sometimes get thru to windows phone 7. but generally reboots. Done spl back to stock and leoimg on sd back to stock and tried task28s, 29s, etc but just reboots constantly and randomly.
Any thoughts here? What is warranty process? DO they replace at all with NEW? or new BOARDS/RAM? Gone back to 1.66 spl and sent in for repairs. because - the stupid recommended Romupdateutility HTC stock rom 'upgrade' did this damage.
and yes, was Windows Phone 7 and activated with marketplace & xbox/live.
Click to expand...
Click to collapse
Did you check the battery pins ? Sometimes they do get bent out of alignment and simply pushing them back into place gently does the trick.
After downgrade to 6.5 with program downloader 4. When i use camera+ power i have white led and on screen i have white text : MOD fs_device. C 0248
This screen after 10-20 second turn of and led is red.
Please help.
bahni said:
After downgrade to 6.5 with program downloader 4. When i use camera+ power i have white led and on screen i have white text : MOD fs_device. C 0248
This screen after 10-20 second turn of and led is red.
Please help.
Click to expand...
Click to collapse
1.program downloader ? TG Downloader, yes? 2. which 6.5.x ROM as .bin you have flash? 3. what exactly you are planning, why use camera+ power key?
I use camera and power becouse only this combination do something with phone.
I flash bin Nokser rom.
i use program downloader 4 from nicola92 post.
it will just do this with noksers wm6.5.x rom
i also had the screen MOD fs_device. C 0248
just flash a different wm6.5.x rom or whatever other rom you want its just noksers rom that did this to me
How you upload rom? Becouse after 10 second screen turn off.
jonnyhall1bmx1 said:
just flash a different wm6.5.x rom or whatever other rom you want its just noksers rom that did this to me
Click to expand...
Click to collapse
After that, the phone displays a green light, vibrates and all. Now TG downloader doesn t even see the phone/
OK which ROM will it NOT do it with that will restore my phone as I have this problem as well. Please a link to a bin file would be excellent (So I don't have to convert it as I don't know how).
I have to say I feel a bit nervous about flashing something that doesn't have the 0321 radio, or shouldn't I be worried about that?
---------- Post added at 01:47 AM ---------- Previous post was at 01:45 AM ----------
propeller_nf88 said:
After that, the phone displays a green light, vibrates and all. Now TG downloader doesn t even see the phone/
Click to expand...
Click to collapse
Ah.. welcome to my world :-( Are you trying a bin file or a tsw file? (And why does it seem to work for some people and not for others??)
There MUST be something common here. Either people have different versions of phones OR we are all making the same mistake somewhere?
For example: I had to go into the device manager and manually update/reinstall the drivers for the wm6.5 bootloader drivers and the wp7 bootloader driver, as otherwise it wouldn't see the phone.
Also.. I'm flashing bin files. I figure the cable is fine as well as it seems to install the bootloader so I can flash, and the phone restarts when it should etc.
I was looking round for this MOD 248 thing, and the phone not booting, and it looks like back in October 'nyl' and a few others were getting this issue, yet still managed to recover there phones. So don't lose hope
I don't know why, but it seems like certain bin files work for some people but not for others? Very strange.
If anyone has some other bin files (WM6.5 AND WP7 that they know will work, please link to them )
Thanks!
Scougar said:
I was looking round for this MOD 248 thing, and the phone not booting, and it looks like back in October 'nyl' and a few others were getting this issue, yet still managed to recover there phones. So don't lose hope
I don't know why, but it seems like certain bin files work for some people but not for others? Very strange.
If anyone has some other bin files (WM6.5 AND WP7 that they know will work, please link to them )
Thanks!
Click to expand...
Click to collapse
hi, i don't know much over the qpst upgrade method- but few user here with same/similar issue (flash! although get a checksumm error!) have managed it succesfull ...........
Hey mirolog
Do you have a working link to your mirom8 wm6.5 build please? I assume I will need to change radio on it from 300 to 321 before I flash though as well?
I will try the QPST method if another rom doesn't solve my issue.
Scougar said:
Hey mirolog
Do you have a working link to your mirom8 wm6.5 build please? I assume I will need to change radio on it from 300 to 321 before I flash though as well?
I will try the QPST method if another rom doesn't solve my issue.
Click to expand...
Click to collapse
hi Scougar
miRom 8 radio 1600: http://www.multiupload.com/VDJGVNXJ6Y
miRom 8 radio 0300: http://www.multiupload.com/RP1WJZKA48
miRom 7 radio 0321: http://www.multiupload.com/CBZG3QUHAD
and the 0321: http://www.multiupload.com/CS80W6QP8E if you like to change a ROM to 0321 Radio
good luck, my friend , miro
Thanks mirolg
Downloading now. Will let you know later. I also found a 0321 tsw file on my sd card, and have used TG Tool to decrypt it to a bin file, so if your's doesn't work I'll try this one as well
Didn't work :-( MOD 248 issue again. Retried wp7 just in case.. no good lol.
maybe qpst only way then.
I had this problem and i and i have not solved it yet. What happend?
1. At this point " 5. Install tg downloader and the 32 bit driver." driver not installed properly ....Qualcomm .... with red x. My OS is XP sp3 32bit
2. At this point " 10. Start download. on the 99% stay 1-2 min. PLEASE wait the 100% and the auto reboot " ... i get error ... invalid checksum , phone rebooted
I installed ZTEiT Common downloader and the acer f1 driver ... no problem
pressing and holding Camera + Power button get me Blue led . i flashed wp7 , phone rebooted, but nothing on the screen,
I tried to get back to wm 6.5 but at the end after reboot i get on the screen this code
MOD 0248, I tried many times and various wm6.5 ROM till i made a big mistake: flashing without SD card inside, after that PC does not recognized my TG01, I thought its bricked becouse it could not get in to downloader mode, no white led, only green, no message on the screen. I charge the battery via USB cable cut until 4,15 V in vain, nothing happend. I hope it will help others to see what risk assumes. good luck !
I see no reason why flashing without the SD card in would cause an issue.
Note: Rapidly flashing orange/red light normally means battery is too low/depleted... so recharge using either the USB cable cut trick, or buy a cheap mobile phone battery EXTERNAL charger. (One that you take the battery out to charge with).
This really does seem now to be a common theme. What the heck is going on here? Do some people have slightly different model phones, or are we doing something ever so slightly wrong?
Also: If i hold down Camera + Up Volume + Power, I get the message "checking ftm mode Shared memory RPC Failed! - Spin Forever!". Now does this mean it's not actually in ftm mode?
Bah. Just tried using TG Downloader on a Windows XP Virtual Machine. I cannot get it to open the port. Regardless of whether I have installed drivers. Even tried setting the COM Ports to be the same value in a vain hope, or installing the drivers into W7 as well, but no use :-(
It was mentioned about having to use TG01C but I can only use (on my XP Laptop) TG01W, otherwise it doesn't open the port and flash. Do I need a slightly different boot loader for my phone or something?
The bit I REALLY don't get is that unless you manually install the drivers for the phone (I.e. going into the device manager, and selecting the folder, and then letting it pick up that you have plugged in a TG QDLoader... it won't work. BUT.. the guide makes absolutely no mention of this? This seems odd.
Well... I've tried:
Different cables
Different ROM's (WP7 and WM6.5) mirolg's and nokser's
Decoding Different ROM's
Redownloaded bootloaders from different sources
Charged the battery 100% in an external charger each time
How the heck am I going to get out of the MOD 248 situation (wm6.5) / Green light (WP7)
What other options for flashing are open to me? I can't boot wm6.5 or wp7 :-( Does my phone need a different boot loader perhaps?
I do not believe my phone is bricked, because it does have a display and it can sometimes tell me the FTM check failed (using different buttons to force the FTM option). "nyl" managed to get out of this MOD 248 situation with a different ROM, but I can't for some reason.
I am scared to flash any other rom than a 0321 rom, although I can obviously change radio's on other rom's if need be.
it's really depressing to see you're trying to flash the wp7 without any sucess . so sorry for you. wp7 bootloader from my [guide] werks very well. I think it not exist a another or different wp7 bootloader.
I like to help you, but I don´t know nothing over this MOD 248 issue. In other thread i have read, one user with same/similar issue, solved it with flash with qpst method .........
have you try it?
Don't think I can do QPST method if I can't load anything? (I've had three ciders tonight so forgive me - we came second in the pub quiz.. our first win (top three!) lol ;-) )
Will look into it.
I realise I kinda vocal on my issue - and let me state right now: "I do NOT blame you guys, I thank you so VERY MUCH for creating these WP7 ROM's, you only have my upmost respect "
I do actually see a fair number of people saying they were unable to flash correctly (i.e. Stuck between WM6.X and WP7 :-( ) So I figure I have to keep trying so that I can provide a solution for those people as well. Maybe I can compare my phone model/year/serial number/place of manufacturer etc to other people that are having issues, and those that had success?