Hi, my son has bricked the phone (he play with mtty), NIKE do not power on (black screen and is not possible to go on color splash screen pressing camera+power key) when i try to connect to usb the computer ask me some drivers.
somebody can help me???
Thanks
Boscolo
OK
What have you done befor you get this error?
If the Green LED Light, you are in the OEMSBL. Search in the XDA for "OEMSBL" it discript the right drivers and what you can make with it! Have you use in the SPL the "Type 2a" command??
My son try to format the phone with mtty for install new rom. probably he make a disaster.
now the only thing works is the orange led when i connect to the usb port for charge.
if i try to connect by usb cable the computer serch for install new driver but i dont know what driver.
i ask if there is some possibility to do something.
thanks
Now i have the comunication from pc to the phone with Mtty for the driver i used QUALCOMM, the phone seems to be formatted how i can install the sspl-1.16-nike.exe (or other loader)?
Thanks to any can give me some solutions and sorry for my english.
ARGL
Tell your son ... he need to read all posts in a thread! "Type 2a" doesnt fix defekt marked clusters on qualcomm device. this is a reported error from kaiser!! this is why some spls doesnt support this comando!!! you can found a lot WIKI Entrys about this problem.
to fix it, you need talk with the user "jockyw" or read this thread -> http://forum.xda-developers.com/showthread.php?t=394584
he must know what Radio Rom Version you have! possible he must edit for you a special "Frankenkaiser" Version to provide a solution. if you need a special version, donate him! one thing ... jockyw is very busy!!!
thanks for reply but today the phone was send to HTC for reflashing.
Related
mr lumpistefan
i have posted many posts on the forums and have emailed you for help but you never seem to reply sir ,and you seem to be the only person who can actually help me if you can pls sir as i cannot get my wallaby working like i said ,,all i get is when i plug in the usb sync lead on my pc in device manager i get HTC USB SYNC ,,what ever flashing software i use it wont work it says please connect via active sync but i cant as i have no rom on pda also i have no bootloader to flash via sd card ,,and fix bootloader tool wont work either as it wont connect with pda or communicate
i no the device can be recovered because its still working just needs the software rom and bootloader back so if you can show me how to flash my pda back to life i would be very grateful ,i have checked continously on the entire forum for my problem and i coudnt find nothing related to it
I agree
Tends to be a common problem and I've been coming to the site for months looking for help and have yet to find it. Any help would be appreicated.
Hello pdaman.
Sorry, that you didn´t get an answer from me, but do not know any other solution than mentioned here in the forum. I think the device is stuck, because you don´t have access to the bootloader to flash a new ROM via SD, and you can´t repair your bootloader, because the device do not came up , so that you get an connection via ActiveSync.
I personaly do not know any other solution to reflash the device....
Stefan
maybe this for the bold and brave
http://wiki.xda-developers.com/index.php?pagename=WallabyJTAG
i dont get it ,,,,if the device shows HTC usb sync in device manager and the device is working fine just needs bootloader and rom back how can you say i,m stuck ,,,i spoke to many pda engineers all quoting me around 30pounds sterling to fix it so it is possible to do so oh welll it seems 1000's of people using this forum hasnt come across htc usb sync before? when i check on google htc usb sync i see that the treo handset uses similar features theres even special rom flash software that communicates with my pda right now but again there for treo and i contacted the software developers but no reply
i am trying my best to find a cure for this ,,,i,m so glad my blueangel device isnt as crude as the wallaby as i destroyed the bootloader many times on my blueangel and recovered it in seconds but the wallaby is so delicate
i will keep everyone posted if i find a way of flashing a wallaby device while theres no bootloader and os on it and it shows HTC usb sync in device manager and if theres anyone out there reading this please please share it with us as i,m sure i am not the only one who has this problem
know that ur frustrated but if the Stefan said that he honestly dont know the solution than why blame him bcoz "device is stuck", he helped to a tons of people about software problems with wallaby and Im sure that he would help you too if he know the solution
[img=http://img444.imageshack.us/img444/2017/dscn1600br9.th.jpg]
you will need
microsoft activesync installed on your windows pc
download ubrhurricane.rar from rapidshare HERE (link dead use this one)
http://www.megaupload.com/?d=JLO5H1L7
unrar this to your desktop.
to unlock go to the unlock folder and copy the cert.cab file to your phone using activesync and run the app from your phone. if your phone wont run the file then use the SDA_applicationUnlock.exe.
in the unlock folder you will find SPVServices.exe click SIMLock Tool and let it do its magic, after this click CID Tool. This will set your phones CID to 1111...
your phone will now be unlocked
we will now patch the ruu,
you will need to turn your phone off and hold the camera button whilst putting the usb into the phone. this will turn it on and show you a three colour screen. go to the spl folder use Patched_RUU.exe to flash your phone, after the bar has reached 100% you can unplug the phone. and turn it off.
now, use as.exe to kill microsoft activesync and then double click on MMTY142.exe this is what we will be using to flash your phone.
do the same thing we did before, hold the camera button and it will show you a 3 colour screen. but this time it will say
need an I U(0)?
make sure you select Y. (youwont see a N) you might need to do this a few times to get it right.
click the usb button and then it will show you a terminal which you will then type:
info2
this should tell you that your phone is SUPERCID (if it isnt then go back and unlock again otherwise the rest wont work)
now type
format BINFS
after that you will then need to tell them where the rom is, we will be using 413.bin which is selang09's wm 6.1.
type in
l c:\thefilepathtoyourdesktopgoeshere\ubrhurricane\413.bin
this will then flash your phone and you can turn it off after it says its complete. if this fails then just try it again its probally because you didnt get a Y at need an I U(0)? )
you can reboot and you will see your phone with wm 6.1 when it boots up it will be in the chinese language. this can be changed by pressing start, 6, 0, 2 and then select US English.
install t9 english.cab using activesync onto your phone to sort out the chinese keypad.
you will now have a working wm6.1 in english with an english t9.
at the moment selang09 413 wm6.1 rom is the best i have used. its VERY RELIABLE.
htc hurricane 4 ever
ps, use www.skyfire.com
Link not valid anymore.
Could you reupload ubrhurricane.rar
http://www.megaupload.com/?d=JLO5H1L7
sweet! just flashed it yesterday and it seems to be working fine.
I'm glad to see someone is still active in this part of the forum. been awfully quiet around here lately.
Hello, what other languages are there in the ROM? Any known problems?
only chinese and english mate, no problems. do rember to install the english t9 or one for your own language. everything works cheers.
Unlockable
I just get "phone is unlockable" message when trying sda_applcationunlock.exe.
On an orange UK g only sim c550 with vista and active sync active
Tried on XP and vista.
Anybody any thoughts appreciated.
are you sure you have copyed the cab file to your phone and its executed? then run the exe..?
is it a chinese rom?
hey guys, now i am tried 3 diffrent roms and always it is in chinese is it right.
may i change the language or do i need an english rom?
how can i change the language?
where i can find an english rom?
thanks a lot
lessew
ubrdave said:
click the usb button and then it will show you a terminal which you will then type:
info2
Click to expand...
Click to collapse
Hi there, i think there's meant to be a space between 'info' and 2,
e.g. "info 2"
cheers!
Definitely a space between info and 2
Couple of other little things that might be worth editing in your fine original post...
do the same thing we did before, hold the camera button and it will show you a 3 colour screen. but this time it will say
need an I U(0)?
make sure you select Y. (youwont see a N) you might need to do this a few times to get it right.
Click to expand...
Click to collapse
You might want to make ultra clear that we need to press 0/zero at this point, I was stumped for a while, tried pressing every key...
click the usb button and then it will show you a terminal which you will then type:
Click to expand...
Click to collapse
You might want to clarify this is the USB button in MMTY142, as I saw USB in the bottom left corner of my phone, and kept trying to press the left soft button instead.
Finally, to reassure people that nothing is wrong, they will need to restart after selecting US English as the language, for all menus to not show Chinese any more.
Thanks a lot for putting the guide together, I've had to go back to my C550/Hurricane after I cracked the screen on my Kaiser - I was getting annoyed with so few new/useful apps working on WM2003SE / pre-NET CF3, and had still had a backup-backup phone in the form of my SE K700, so decided to give WM6.1 a shot. Off to try and install PockeTwit now
Hi, my phone totally dies before I ran the Patched_RUU.exe; it just don't turn on or do anything else. Can you tell me something to bring it back?
Sorry, I don't know the answer, but others may find it useful to know if your phone won't enter the three colour screen, OR just won't turn on normally?
Just to confirm, what happens if you hold down the camera button on the side, then connect a (known working) USB lead between it and your PC? And if you connect your phone to a mains charger, does the orange LED light up to indicate charging is taking place? Any other previous symptoms with this phone?
SilentlyScreaming said:
Sorry, I don't know the answer, but others may find it useful to know if your phone won't enter the three colour screen, OR just won't turn on normally?
Just to confirm, what happens if you hold down the camera button on the side, then connect a (known working) USB lead between it and your PC? And if you connect your phone to a mains charger, does the orange LED light up to indicate charging is taking place? Any other previous symptoms with this phone?
Click to expand...
Click to collapse
Hi;
The phone is totally dead (No three colors screen, no ligth on, no nothing).
If I hold down the camera button on the side and then I connect a (known working) USB to the PC; guess what... yes! Nothing Happens!
If I connect the phone to a main charger then the orange LED light up.
If I remove the battery and then put it back again and try to turn it on the LED light up in red (it blinks just once).
Could anybody help pleeeeeease!!!!
THX
Hi,
I have a problem with the flash:
After "info 2" I get this:
Cmd>info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
CMD55 failed
HTCSSuperCID ' HTCE
And then nothing happend with "format BINFS"
What's the problem? I did something wrong? I tryed again with the unlocking procedure but it happened everytime!!
PLS HELP GUYS
You sure choose "Y" when you've been asked for UI interface.
You sure unkock your hurricane I'm mean Sim, Cid, SDA Applicattion.
Hi,
Yes I did! I used the spv tool for it, but no way to pass the "info 2".
Why?!?
Help Please
info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
***** user area size = 0xF400000 Bytes
HTCSSuperCID ' HTCE
Cmd>format BINFS
Format BinFS partition.
Format is completed!!
Cmd>l c:\rom.bin
clean up the image temp buffer at 0x8C080000 Length 0x01C40000
MTTYDownloadImage "c:\rom.bin"
:F=c:\rom.bin
start download
SHAddress 82040000h Length 02630000h
Before flashing new image , formatting old OS is completed!!
Start flashing new image!!!
*checksum = 0, skip checking
OEMFlashWrite(82040000h,8C080000h,01C00000h)
Update BINFS offset 0x00000000 length 0x01C00000 ...
WBinFS D=0x0 L=0x1C00000 CS=0xD3D7666A
WBINFS from S 0 l=29360128 57344 SS
ReadB A=0x0 L=0x1C00000 CS=0xD3D7666A
Update BINFS success.
2nd download dwVaddr=0x8C080000
*
Then it hangs for5 mins and mtty says about being idle for 5 mins? is it still flashing please can someone help thankyou
thanks for giving me a tutorial that help me
efficiently BRICK my hurricane in less then 2 minutes!
yay!
Followed instructions precisely..
after i did the "patched_RUU" update..
BRICKED.
bullshi*.
oraeanast said:
thanks for giving me a tutorial that help me
efficiently BRICK my hurricane in less then 2 minutes!
yay!
Followed instructions precisely..
after i did the "patched_RUU" update..
BRICKED.
bullshi*.
Click to expand...
Click to collapse
What an ungrateful & rude person you are. YOUR phone was bricked when YOU decided to try something on it. No-one forced you to attempt it.
As you may have guessed from other responses here, most of us have flashed this and other ROMs with no problem.
Is it definitely bricked? Have you tried various recovery techniques.
Have you previously tried asking for assistance in a non-confrontational manner, or even just asking for assistance?
after flashing hardspl the device isn't booting anymore.
Only a black screen and if the device is connectet to PC via USB it is detectet as Qualcomm Diagnostic Interface (comx).
I can connect via mtty and run "setboot" and "rdata 90000000 1".
after that i can run a memory dump with qpst tools or try to run the special niki version of frankenkaiser following the steps from forum.xda-developers.com/showthread.php?t=641670
wenn frankenkaiser say "Just be patient ...." , the "7e 02 6a d3 7e" shows on the screen and asks for "Replug USB cable now!" the device is found as "Unkown device" and no com or usb port is shown to connect with mtty and run the next steps.
has anyone an idea whats happen?
TheAbyss said:
after flashing hardspl the device isn't booting anymore.
Only a black screen and if the device is connectet to PC via USB it is detectet as Qualcomm Diagnostic Interface (comx).
I can connect via mtty and run "setboot" and "rdata 90000000 1".
after that i can run a memory dump with qpst tools or try to run the special niki version of frankenkaiser following the steps from forum.xda-developers.com/showthread.php?t=641670
wenn frankenkaiser say "Just be patient ...." , the "7e 02 6a d3 7e" shows on the screen and asks for "Replug USB cable now!" the device is found as "Unkown device" and no com or usb port is shown to connect with mtty and run the next steps.
has anyone an idea whats happen?
Click to expand...
Click to collapse
keeping mtty aside did u try a hard reset ?
yes
after hart reset the screen is also black and the device is detecting as data diagnostic device
TheAbyss said:
yes
after hart reset the screen is also black and the device is detecting as data diagnostic device
Click to expand...
Click to collapse
hmmm u can do two things,first search this forum similar problem has been sorted out somewhere.second u can request Rataplan here http://forum.xda-developers.com/member.php?u=816728 to help u.he surely will help u,once he is online.I will try to find out that thread for u
deepankerjha said:
hmmm u can do two things,first search this forum similar problem has been sorted out somewhere.second u can request Rataplan here http://forum.xda-developers.com/member.php?u=816728 to help u.he surely will help u,once he is online.I will try to find out that thread for u
Click to expand...
Click to collapse
try this one http://forum.xda-developers.com/showthread.php?t=390606
i cant try this because the device isn't booting up anymore.
hard reset, soft reset, soft reset with cam key noting brings the device up.
i bet you have the same problem like me!!!!
look in the threads for the post: htc niki broken
just 2 or 3 thread above yours!
read it und pls post if ur prob is the same!!
yes it sounds like we have the same problem.
I hope there is a way to fix this problem with the bootloader, but with mtty and frankenkaiser (niki port) way i has no result.
re
hy i could help you i gest have the same problem you need to do this: press camera buton, with stilus reset an power buton the same time, than your phone will boot from the microsd card your rom image, the image need to have the name NIKEIMG.nbh, you can take thr rom image from your rom archive
doesn´t work .....
Appreciate the right person to provide us the way to the resurrection of our topaz brick, please many people need to work again our topaz.
Investigate all a brick recovery tutorial, thank you very much
Eject your sd card and pull the battery out.
Download a rom and start the rom with the RUU update tool **** on your pc.
Connect your phone.
Your phone will boot up in recovery mode.
Start the update after RUU found your phone.
The phone will update after the update re-insert your battery and let it charge for à minute or 5 before you start your phone.
Hello my friend, my topaz not start or enter bootloader mode, I'll run what I say and I'll tell you, you are very rewarding in this problem thank you.
Hello my friend, sorry to say that the operation did not work I have indicated, the phone does not recognize the pc and I get error 260. You have another idea to solve this problem?, Thank you
joseramon.gl said:
Appreciate the right person to provide us the way to the resurrection of our topaz brick, please many people need to work again our topaz.
Investigate all a brick recovery tutorial, thank you very much
Click to expand...
Click to collapse
You should be more specific describing your issue. What exactly has happened? What ware the circumstances? What is happening now: does your phone react to power button? Does it enter bootloader? Does your PC see the devise if it’s plugged in? Does your battery charges? etc…..
You're absolutely right, I detail the problem:
1-the problem arose at a bad flash, I run hard spl of mega htc (pack of Harry) was in error, for I have also the mega htc and wanted to investigate the change of rom, but was connected topaz pc loaded and will affect the execution of another program.
2-since then the htc topaz shows no signs of life, does not work, don`t boot into bootloader, it is not recognized by the pc, you are not charging LED light up, but pc connected to the battery if it heats up because I think load.
The situation is complicated solution to the problem you my friend?,
If you killed the bootloader, you'll probably aren't able to recover it only via USB and a PC. Here is the jtag pinout:
http://forum.xda-developers.com/showthread.php?t=669871
This is a programming connector. Don't ask me about how to work with it....I just know that you can program via this connector a broken flash. Hopefully somebody can help you.
yes man, sorry to say, but you are in real trouble. i think you should directly get it touch with the post starter of the jtag thread, mentioned above, mr. the-equinoxe. hi is real tough guy.
Information displayed is perfect, is a great information, now we have to work hard, thank you very much and if you have more information would be of great help.
The truth that I have no idea where to start, if it is attached would not know which pins to which, if you must connect the pins with a PC would know not, can you help?
God bless
joseramon.gl said:
Information displayed is perfect, is a great information, now we have to work hard, thank you very much and if you have more information would be of great help.
The truth that I have no idea where to start, if it is attached would not know which pins to which, if you must connect the pins with a PC would know not, can you help?
God bless
Click to expand...
Click to collapse
sorry. but I have never did this. ask this man http://forum.xda-developers.com/member.php?u=323818
maybe he can help you. write him personal massege.
Mr Egorlev ,You're a gentleman, I will accept your suggestion, I appreciate all your support, thank you very much again .
Hi everyone
Be as nice as you can be this is my first post
So i tried to unlock my Xperia NEO with Omnius by changeing the certificate and using the paperclip trick test point etc but now my phone is dead nothing will read it atall apart from Omnius as a Zeus USB flash device. No lights on it nothing. I have done some searching around and found a post for a guy that might be bale to help with remote axx o his SETool Dongle but i wanted to check if this si the best solution or the only solution as there is not much I can find anyway about thisproblem !!!
any help would be much appreciated from the community.
Cheers
Did you try to connect from USB holding back key and then it will take green light. If it works you can flash it through x10flash.
Sent from my MT15i using XDA App
Hit the thanks if I help you.....
Yep tried the back button and connecting the USB it only recognises it as Zeus USB Device no lights thats why i`m stumped
Thanks for the replyany other help or advice would be apreciated.
sorry that not quite understand about your question, English is not my native language and the last sentences is so long that I can't get it....
Do you refer from this:
http://forum.xda-developers.com/showthread.php?t=1254416
I didn't tried that method though, but just guessing, please don't blame if wrong.
May be you install wrong driver somewhere so it detect as "Zeus USB flash device", because I see you need to install driver manually just after connect the testpin.
Try remove the device in device manager and re-install the driver, see if any better.