Appreciate the right person to provide us the way to the resurrection of our topaz brick, please many people need to work again our topaz.
Investigate all a brick recovery tutorial, thank you very much
Eject your sd card and pull the battery out.
Download a rom and start the rom with the RUU update tool **** on your pc.
Connect your phone.
Your phone will boot up in recovery mode.
Start the update after RUU found your phone.
The phone will update after the update re-insert your battery and let it charge for à minute or 5 before you start your phone.
Hello my friend, my topaz not start or enter bootloader mode, I'll run what I say and I'll tell you, you are very rewarding in this problem thank you.
Hello my friend, sorry to say that the operation did not work I have indicated, the phone does not recognize the pc and I get error 260. You have another idea to solve this problem?, Thank you
joseramon.gl said:
Appreciate the right person to provide us the way to the resurrection of our topaz brick, please many people need to work again our topaz.
Investigate all a brick recovery tutorial, thank you very much
Click to expand...
Click to collapse
You should be more specific describing your issue. What exactly has happened? What ware the circumstances? What is happening now: does your phone react to power button? Does it enter bootloader? Does your PC see the devise if it’s plugged in? Does your battery charges? etc…..
You're absolutely right, I detail the problem:
1-the problem arose at a bad flash, I run hard spl of mega htc (pack of Harry) was in error, for I have also the mega htc and wanted to investigate the change of rom, but was connected topaz pc loaded and will affect the execution of another program.
2-since then the htc topaz shows no signs of life, does not work, don`t boot into bootloader, it is not recognized by the pc, you are not charging LED light up, but pc connected to the battery if it heats up because I think load.
The situation is complicated solution to the problem you my friend?,
If you killed the bootloader, you'll probably aren't able to recover it only via USB and a PC. Here is the jtag pinout:
http://forum.xda-developers.com/showthread.php?t=669871
This is a programming connector. Don't ask me about how to work with it....I just know that you can program via this connector a broken flash. Hopefully somebody can help you.
yes man, sorry to say, but you are in real trouble. i think you should directly get it touch with the post starter of the jtag thread, mentioned above, mr. the-equinoxe. hi is real tough guy.
Information displayed is perfect, is a great information, now we have to work hard, thank you very much and if you have more information would be of great help.
The truth that I have no idea where to start, if it is attached would not know which pins to which, if you must connect the pins with a PC would know not, can you help?
God bless
joseramon.gl said:
Information displayed is perfect, is a great information, now we have to work hard, thank you very much and if you have more information would be of great help.
The truth that I have no idea where to start, if it is attached would not know which pins to which, if you must connect the pins with a PC would know not, can you help?
God bless
Click to expand...
Click to collapse
sorry. but I have never did this. ask this man http://forum.xda-developers.com/member.php?u=323818
maybe he can help you. write him personal massege.
Mr Egorlev ,You're a gentleman, I will accept your suggestion, I appreciate all your support, thank you very much again .
Related
mr lumpistefan
i have posted many posts on the forums and have emailed you for help but you never seem to reply sir ,and you seem to be the only person who can actually help me if you can pls sir as i cannot get my wallaby working like i said ,,all i get is when i plug in the usb sync lead on my pc in device manager i get HTC USB SYNC ,,what ever flashing software i use it wont work it says please connect via active sync but i cant as i have no rom on pda also i have no bootloader to flash via sd card ,,and fix bootloader tool wont work either as it wont connect with pda or communicate
i no the device can be recovered because its still working just needs the software rom and bootloader back so if you can show me how to flash my pda back to life i would be very grateful ,i have checked continously on the entire forum for my problem and i coudnt find nothing related to it
I agree
Tends to be a common problem and I've been coming to the site for months looking for help and have yet to find it. Any help would be appreicated.
Hello pdaman.
Sorry, that you didn´t get an answer from me, but do not know any other solution than mentioned here in the forum. I think the device is stuck, because you don´t have access to the bootloader to flash a new ROM via SD, and you can´t repair your bootloader, because the device do not came up , so that you get an connection via ActiveSync.
I personaly do not know any other solution to reflash the device....
Stefan
maybe this for the bold and brave
http://wiki.xda-developers.com/index.php?pagename=WallabyJTAG
i dont get it ,,,,if the device shows HTC usb sync in device manager and the device is working fine just needs bootloader and rom back how can you say i,m stuck ,,,i spoke to many pda engineers all quoting me around 30pounds sterling to fix it so it is possible to do so oh welll it seems 1000's of people using this forum hasnt come across htc usb sync before? when i check on google htc usb sync i see that the treo handset uses similar features theres even special rom flash software that communicates with my pda right now but again there for treo and i contacted the software developers but no reply
i am trying my best to find a cure for this ,,,i,m so glad my blueangel device isnt as crude as the wallaby as i destroyed the bootloader many times on my blueangel and recovered it in seconds but the wallaby is so delicate
i will keep everyone posted if i find a way of flashing a wallaby device while theres no bootloader and os on it and it shows HTC usb sync in device manager and if theres anyone out there reading this please please share it with us as i,m sure i am not the only one who has this problem
know that ur frustrated but if the Stefan said that he honestly dont know the solution than why blame him bcoz "device is stuck", he helped to a tons of people about software problems with wallaby and Im sure that he would help you too if he know the solution
Hi, Let me honestly admit that I am a newby and have read the threads over the last few weeks so much that I'm really confused now. I read one thing which then asks you to click and read another, but the answers I want are only partly found.
So I hope someone can please take pity on me and answer the following:
I have a TyTN SIM FREE phone which has a Orange sim card. In fact, Virgin & o2 cards have been used on it but Orange seems the best at the mo'.
Does that mean its unlocked?
I am trying to upgrade to WM6 (without even thinking about WM6.1), but "Error 260" comes up each and every time. I have tried 150+ and its still the same.
Please believe me that I have tried every way mentioned on these forums. I've tried on a xp (I have Vista) and its still the same.
My phone screen just goes black when trying to install, then the error comes up.
What exactly is "OPEN PORT" ? I cannot find a thread that actually EXPLAINS that. What do I have to do when it says:"Reset your computer"? Which one, the desktop or the TyTN? If the latter, I have reset so many times. If the desktop, what do I have to reset?
My TyTN tells me that its a HERM 200 IPL- 1.00 and HERM 200-2.03.
If someone can just list in a order what I have to do in order to get this upgrade I would be for ever grateful. HTC do not want to know & London HTC Support Hotline was a washout.
I do hope to hear soon, cos' its started to drive me mad now.
reset both, try unplugging usb cable and plugging into another usb port if prob persists...
1). download and install Hard SPL ver 7. Here http://forum.xda-developers.com/showthread.php?t=296722
This makes it easier or possible to unbrick your phone if something does(will) go wrong. THIS IS A MUST!!!!!!!
2). Once you have Hard SPL on your phone, you can either use the pc to flash OR the sd card method. I personally prefer the sd method as its harder to brick your phone. To do this, download the HERMES rom of your choice. Unzip(rar) the file and generally there are 2 files. RUU_Wrapper.exe & RUU_signed.nbh. Copy the RUU_signed.nbh onto a fat 32 formatted memory card and rename it to "HERMIMG.NBH". Put it back in the hermes and go to bootloader( hold power and OK button(above the flywheel) and then reset with the stylus. hold ALL the buttons down until it goes into tricolour screen. It should automatically detect the flash file and start the upgrade process, follow the prompts... Please remember to either delete or change the name of the .nbh file else it will upgrade next time you go into bootloader.
Hope this helps... Cheers...
Hi. Thank you for your reply and at the mo' I'm trying to get the Hard SPL7 file on my pocket pc. I've never come across something which sounds easy but being very difficult! The file is on my phone, but "will not unzip 'cos .net compact framework is not on my pocket pc" when I am staring at it in the face in my downloads.
What I've decided to do is to do a hard reset and start afresh. I'll let you know how I get on....
download it to your computer, not the phone
pls see the guides here: www.mrvanx.org
Sorry not been able to try anything yet due to illness. Going to try tomorrow & I hope it works. Not tried for a while and already dreading it.
I'll let you know how I get on. Thanks for your replies.
Hi everyone. Just letting you know a friend of mine upgraded my pocket pc. He said it was "hard work" but he did it!
The phone works great and is much faster, but now I have another problem. It will not sync with WMDC.
It is possible a new thread will be following soon. I am at present, following other people's advice.
Thanks for everyone's help.
beegeebopper said:
Hi everyone. Just letting you know a friend of mine upgraded my pocket pc. He said it was "hard work" but he did it!
The phone works great and is much faster, but now I have another problem. It will not sync with WMDC.
It is possible a new thread will be following soon. I am at present, following other people's advice.
Thanks for everyone's help.
Click to expand...
Click to collapse
Letting us know what ROM you had flashed with would help. As the different ROMs have different solutions in solving that WMDC problem.
Dear all,
I just got a Dopod 838pro, it seems totally dead as i can't turn it on, i can't make it enter the bootload mode. the only thing i can see is the LED is in red when i charge it.
does any one know what's the problem and how to fix the problem?
many thanks.
Try another battery if you know someone that has the same device. It could be bung.
Cheers...
ultramag69 said:
Try another battery if you know someone that has the same device. It could be bung.
Cheers...
Click to expand...
Click to collapse
yes i have put a imate JASJAM battery in it but the problem is still the same.
cheers.
seems no solution?
no simple solution
Hi tangwd898,
i got no simple solution but some advice.
First i have to quote myself form another thread :
This is very similar to what happened to my device. After downgrading from olipro's hard-spl something went wrong. After flashing succeeded with 100% the device got restarted and there it was... nothing!!
What i found out in the meantime is that the IPL was not flashed correctly.
While trying to reflash the device with JTAG debugger, i examined that the NAND write protect signal sticks to GND right after reset.
Maybe this also a hardware issue. I'll find out soon
The bricked IPL-bootloader could also be the cause.
At least if the red light turns on, the DC-DC converter on the hermes is doing well. This means the unit is partially working but not booting.
Click to expand...
Click to collapse
Check if your device is still recognized by a host PC.
If you are not able to enter bootloader and there's no green light at all when you power up the device, i would suggest to check your mainboard.
First do some measurements...
Follow this thread:
http://forum.xda-developers.com/showthread.php?t=316531
You may also try the JTAG method to examine your bootloader code or reflash NAND chip:
http://forum.xda-developers.com/showthread.php?t=391047
In any case you'll need some electric skills and follow the manual to disassemble the device!
Good luck,
scholbert
scholbert said:
Hi tangwd898,
i got no simple solution but some advice.
First i have to quote myself form another thread :
Check if your device is still recognized by a host PC.
If you are not able to enter bootloader and there's no green light at all when you power up the device, i would suggest to check your mainboard.
First do some measurements...
Follow this thread:
http://forum.xda-developers.com/showthread.php?t=316531
You may also try the JTAG method to examine your bootloader code or reflash NAND chip:
http://forum.xda-developers.com/showthread.php?t=391047
In any case you'll need some electric skills and follow the manual to disassemble the device!
Good luck,
scholbert
Click to expand...
Click to collapse
hi scholbert,
thank you very much for the information.
my unit seems NOT totally deal as i found it can be entered into the bootloader for about two second last night for a few times and dead again, but i can't make it enter the bootloader again now. very weird.
The unit can't stay for a long time when it entered the bootloader and will dead when i releaseed the key.
can anyone know how to do next?
many thanks.
Hi guys!!! Before start I want thanks all for all the commitment and the great work.
I follow this forum much but I write today because yesterday I kill my TG01 when I attempt to flash with WP7 with the tutorial that I link ( I cannot use Qinwengui tutorial because the link of WP7boot was removed ).
Hi think that the problem made from a problem when I open the archive that at the inside have the files to flash and, after I erase the nand, when in the next step I write the file occurred, an error with MIBIB writing appear, I try to replace it with no result, at the end, when I put back battery and replace I cannot turn on my TG01.... nothing to do............. is completly dead.
My battery is full (I measure it) only I can ask if there's a solution or if I found a Riff box can I repair this? And how?
Another thanks.
erasing NAND is dangerous do you have any sign of life at all on your tg01 any LED lights, screen ? try different button combinations ?
i did say flashing wp7 for a unexperienced member is not a good thing to do but never mind. report back if you get any LED lights or anything im no pro or anything but i will try my best to help you
I jonnyhall1bmx1, thanks for the quick answer, it's not my first time in flashing procedure, but this time I try this because i'm not at home at the moment of flash and i find only the file of tutorial that I haved link.
But..... no sign of life, is total dead, I try all the combination..... is total dead...
Do you know if riff nox can help me?
I see that situation is totally black!!!
hmmm im not 100% sure how a riff box works
and dont panic, ive had my tg01 doing nothing at all and managed somehow to bring it back to life haha
like i say im no expert i would like to help you but i can only fix a tg01 with LED lights im not sure what to do with it been dead.
your best option is to pm one of the smarter people like NOKSER although you would get an answer quicker out of a brick wall with him.
you could try MIRO, hes a great guy or any of the developers.
dont give up tho like i say my tg01 was once dead 3 times still always somehow got it running
Another thank, I wait if Nokser or Miro see this thread for some minute and after try to give a pm with the first post.
Seems to be real dead, when i put the battery recharger, not come out the orange led, i think now the phone not know to be a phone.
Thanks to all that can give me a help.
Bye.
RonnyRox said:
Another thank, I wait if Nokser or Miro see this thread for some minute and after try to give a pm with the first post.
Seems to be real dead, when i put the battery recharger, not come out the orange led, i think now the phone not know to be a phone.
Thanks to all that can give me a help.
Bye.
Click to expand...
Click to collapse
I not understand for end this problem, but if you not write completly nand parts(bootloader), then phone is dead... now only unbrick device in Riff Box.. or in any J-Tag
Maybe you write video from your screen phone...
Hi Nokser, thanks for your answer.
Ok if you see the tutorial that i use, i'm lock at this point:
Click erase,
when erase has completed click write.
At this point the led change various color but when terminate process give me a message like " MIBIB cannot write...etc...", I try to replace the folder with anothe zip download from another thread but with the same result.
When I disconnect the phone, put out the battery and after riconnect.
Result is a dead phone (completly off:screen and led and other ).
Do you know if in this state with riff box is possible to reflash the nand?
Thank you for all your hard work! Bye.
RonnyRox said:
Hi Nokser, thanks for your answer.
Ok if you see the tutorial that i use, i'm lock at this point:
Click erase,
when erase has completed click write.
At this point the led change various color but when terminate process give me a message like " MIBIB cannot write...etc...", I try to replace the folder with anothe zip download from another thread but with the same result.
When I disconnect the phone, put out the battery and after riconnect.
Result is a dead phone (completly off:screen and led and other ).
Do you know if in this state with riff box is possible to reflash the nand?
Thank you for all your hard work! Bye.
Click to expand...
Click to collapse
Maybe your battery is unloaded.
Riff Box J-tag re-write all nand partition, separate and spare.
Ok so you erased whole bootloader section and when writing it an error occured?
Then:
Riffbox only.
You can try to measure battery voltage with any voltagemeter but I think you killed it.
Thanks to all, yes I can rewrite all nand: Positive.
This is appen yesterday, i have just measured the battery is near to full.
No jtag, only Riff Box.
If I understand now I try to search a riffbox ( need any accessory? ) or search for someone that make this operation near my zone.
Thanks to all, if i have some notice i post it, if another one have another trick, please post.
Now i go to work ( night turn ) thanks for all!
RonnyRox said:
Thanks to all, yes I can rewrite all nand: Positive.
This is appen yesterday, i have just measured the battery is near to full.
No jtag, only Riff Box.
If I understand now I try to search a riffbox ( need any accessory? ) or search for someone that make this operation near my zone.
Thanks to all, if i have some notice i post it, if another one have another trick, please post.
Now i go to work ( night turn ) thanks for all!
Click to expand...
Click to collapse
Riff Box - This is a J-tag tool. This device, repair your phone. However, it is quite expensive.
Maybe you without battery, and wait 2-3 h. This device must rest. I had such cases more than once.
Hi Nokser, this morning I read your post and I try to put out the battery, after 2-3 hours I reconnect the battery with no results.
Now I buy the Riff Box, I think that after the NAND flash i try to sell it right to recover a part of money.
In another thread I see this your photo that I link under this post.
Is this connection the right connection with the Riff box?
And is this without any accessory ( only the cable )?
Always thanks, bye.
RonnyRox said:
Hi Nokser, this morning I read your post and I try to put out the battery, after 2-3 hours I reconnect the battery with no results.
Now I buy the Riff Box, I think that after the NAND flash i try to sell it right to recover a part of money.
In another thread I see this your photo that I link under this post.
Is this connection the right connection with the Riff box?
And is this without any accessory ( only the cable )?
Always thanks, bye.
Click to expand...
Click to collapse
You have bro all info in gsmhosting.com.
All news, method, etc.. or PM for me
Thank for the info, if I need help in the next day I send a PM to you.
I just wait the Riff Box, i think it comes to me in monday.
I see your site and I see some news, I wait for camera driver!!!
Thanks Nokser.
I guys.
Today I try to repair my TG01 but when I press resurrection I receive this error:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.37
Selected Resurrector: [Toshiba TG01]
Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...FAILED
ERROR: Wrong response code from the RIFF Box: 0x45
I know that other guys have the same problem, I have just verified connection and all the advice, who can help me?
Try as HD2
I found it in another forum, now I try this..... Very thanks!
Hi guys, I follow this instruction that I found in another forum, because my initial problem was that I erase the NAND:
Download full backup from this link :
http://rapidshare.com/files/42229365...ull_backup.rar
Connect phone to RIFF, go to DCC TAB, select HTC HD2.
Open full backup, and set following options :
- Start address: 0x0000000000
- Data Length: 0x0000800000
- Check "Image file is used"
- Check "Use address as offset"
- Select ROM1
Other options must be NOT Checked, click "Write". This will restore erased area in modem part.
After more test the only mode that give me the possibility to update is to short pad 1 and 3, turn on the phone and connect via usb: TG01 in Download Mode.
After this perform ROM upgrade using TG01 downloader.
Now I have the problem of Win7 x64 and the driver...
When I have news, I will write.
Bye and thanks to all have help me.
TG01 Return to life!!!
OK, now I have TG01 with WM 6.5 Nokser with Radio 0321.
A partial correction:
After the resurrection with Riff Box "not need" to short Pad 1 and 3, my problem was the battery is go down with the much try.
I make a recharge to much to have 3,7V and after with TG Downloader and Rom.bin of WM 6.5 I flash with success the phone .
For solve the Win7 x64 problem I install Virtual PC with WIN XP and execute all under this.
Now I still do a full recharge and this evening I finally can try WP7!!! ( Cross the finger... ).
Special thanks at Nokser and all the guys that give me a great help.
Thanks to all!!! Happy Christmas and Happy New Year!!!!
]Hello i recently upgraded firmware from 6.0.0 to atv 7.1.1 then after reading benifits of custom roms recided to try atv first sistem booted up great ! I set uprom andwas really enjoying it .after about 4 hours the screen flashed to a pinkish color so i restarted system . system booted back up and stayed on for about 15 mins then all of the sudden went black. i triedrebooting ,rebooting into bootable recovery,nothingno signal to hdmi.after reading many posts and trying multipule methods to restore box nothing wirked. i then pluggedbox in to try to use the USB flash tool and system would no llonger connect to tool. pc windows 10 could no longer recognise my box.
i then used the pin method and shorted out the proper pins and got box to reconnect to usb burning tool. although the box connects no matter what firmware i try or what version of burning tool i try or VERSION of windows on different laptops i try nothing will flash and everything stoppes on 2% with the same error code of [HUB2-2][Inf]--IOCTL_IDENTIFY_HOST_Handler ret=-5 error_msg=libusb0-dll:err [control_msg] sending control message failed, win error: A device attached to the system is not functioning. and also [Err]--[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error. drivers are installed i have tried un installing reinstalling still no signall from hdmi. box still has the red light when plugged in and blue light when pushing power on. please help i would really appreciate it . im kinda a noob with boxes ive flashed a few phones ,mods sone adb mostly basic stuff so i hope itsjust something stupid that im over looking .thank you do all devs for your hard work and everyone for reading this im going to post afewe pics of board hope this might help you help me thanks again Kevin
Sorry
Sorry if my post was too long somebody please let me know if it was a bit excessive I don't want to stop people from responding to help me because it's too long to read .
I wish I could help but when boxes are bricked I just leave them aside to work on them later (which I never get to) and pick a new one. Its too much of time consuming. Maybe someone else can help you.
hapishyguy said:
I wish I could help but when boxes are bricked I just leave them aside to work on them later (which I never get to) and pick a new one. Its too much of time consuming. Maybe someone else can help you.
Click to expand...
Click to collapse
Well I appreciate it, as a community who enjoys the technical aspect and trade of all this I assume that's the reason we post for help so we can learn new stuff about where we went wrong and perfect the process also be able to help people in the future. I'm sure someone else that can help will that's what community is all about. I could buy a new box but what's the fun in that Anyways I appreciate the reply hope you have a good day
Sent from my LG-US996 using Tapatalk
Mesman, my boxes are not bricked. So I do not know the interior electronics stuff.