Hello, I was happy to hear that now it is possible to use the W7 with Tsunagi, but all methods are only for the TG01.
I own the X02T (is a T01A Japanase but with another carrier, SOFTBANK), i success install the miRom WP7 032 7 radio, using TG01toT01A Converter Utility, and my phone start normal with pin method.
But when I tried to install W7, I can not install the windows driver for the "Toshiba DL," I put the phone in download mode using pin 1 and 3, but when I connect to the PC, it does not find the driver, i tried to use the acer driver and the TG_Download_USB_Driver, but does not recognize.
I try with Windows 7 64 and with Vista 32, without success.
Plz someone could give a hand?
eekthecat said:
Hello, I was happy to hear that now it is possible to use the W7 with Tsunagi, but all methods are only for the TG01.
I own the X02T (is a T01A Japanase but with another carrier, SOFTBANK), i success install the miRom WP7 032 7 radio, using TG01toT01A Converter Utility, and my phone start normal with pin method.
But when I tried to install W7, I can not install the windows driver for the "Toshiba DL," I put the phone in download mode using pin 1 and 3, but when I connect to the PC, it does not find the driver, i tried to use the acer driver and the TG_Download_USB_Driver, but does not recognize.
I try with Windows 7 64 and with Vista 32, without success.
Plz someone could give a hand?
Click to expand...
Click to collapse
There is already floating .bin image contatining whole bootloader for WP7, you need to encode it into tsw/enc with t01a key and then flash, it should success and later use tg01 instuctions
Thanks for responding, but how can I do this? i know use the TG01toT01A Converter Utility to convert tsw to tsd (work with my phone), but bootloader dont work, i need use pin to start fone with T01A logo (DOCOMO).
But the problem is where i can get windows driver to make TG_Downloader work? My windows dont recognize the phone.
eekthecat said:
Thanks for responding, but how can I do this? i know use the TG01toT01A Converter Utility to convert tsw to tsd (work with my phone), but bootloader dont work, i need use pin to start fone with T01A logo (DOCOMO).
But the problem is where i can get windows driver to make TG_Downloader work? My windows dont recognize the phone.
Click to expand...
Click to collapse
You need to flash rom with radoi 321 first, I don't know how it goes on t01a but if there's conversion tool it may work, then try to connect into TGDownloader, I recommend 32 bit system and administrative privigles.
aeroflyluby said:
You need to flash rom with radoi 321 first, I don't know how it goes on t01a but if there's conversion tool it may work, then try to connect into TGDownloader, I recommend 32 bit system and administrative privigles.
Click to expand...
Click to collapse
I flash the miRom 7 radio 0321 and working fine, but when i connect the phone in PC windows cant find the driver, soo TGDownloader cant find my phone.
I try with Windows 7 64bit and with Windows Vista 32 bit, and no one driver work.
Plz any idea?
eekthecat said:
I flash the miRom 7 radio 0321 and working fine, but when i connect the phone in PC windows cant find the driver, soo TGDownloader cant find my phone.
I try with Windows 7 64bit and with Windows Vista 32 bit, and no one driver work.
Plz any idea?
Click to expand...
Click to collapse
xp 32 bits and install the driver , that's the problem.
I had that problem but with xp 32 bit and installing the driver, so good
tcampomanes said:
xp 32 bits and install the driver , that's the problem.
I had that problem but with xp 32 bit and installing the driver, so good
Click to expand...
Click to collapse
Windows XP still dont work!! Can't install the driver, but i find this and WORK GREATS!!!!
yep!
finally i found the solution!
open tsbtgdl0.inf in C:\Program Files\TOSHIBA\TG01W Download Driver or what ever u installed
then,open device manager and check ur Toshiba DL with right click and choos "Property“ and find characters like "USB\Vid_0930&Pid_0d6c"
that's ur real device IDs
then in the tsbtgdl0.inf edit below characters to what u just find
Code:
[TsbSerialPort]
%TsbDevice1% = TportInstall00, USB\Vid_0930&Pid_0d80
[TsbSerialPort.NTia64]
%TsbDevice1% = TportInstall00, USB\Vid_0930&Pid_0d80
[TsbSerialPort.NTamd64]
%TsbDevice1% = TportInstall00, USB\Vid_0930&Pid_0d80
save and search driver in tsbtgdl0.inf folder again,u will be happy
Aftrer flash the Bootloader WP7, i can put phone in Download mode (blue led). Choose multi—download and put the 3 files (flash.bin,NPRG8650.hex, partition.mbn) and start! But after press start in "Common downloader V4.7.20 For Android" Begin download the NPRG8650.hex and RAM, and download the partition.mbn and start RESETTING, soo after 15 sec get error Reset Fail.
Pls someone hava any idea?
Hi. I'm also a owner of X02T and using Softbank SIM now. I'm very interested in flashing to WP7.5 because WM6.5 is outdated but I wonder if after flashing to WP7.5, all features like phone, SMS, EMS and etc will work or i'm limited to only certain function and would not be able to use Softbank carrier. Thanks.
WORKING!!!
finally managed to install WP7, boot without PIN (normal way), realy fast boot, and fast OS, very nice, nothing like WP6.5.
now i working to fix 3G and market
congratulate
u did a good job
eekthecat said:
finally managed to install WP7, boot without PIN (normal way), realy fast boot, and fast OS, very nice, nothing like WP6.5.
now i working to fix 3G and market
Click to expand...
Click to collapse
Does Softbank SMS and MMS works after you install WP7? I'm using X02T and interested to flash to WP7.5 but I use SMS and MMS.
wyemarn said:
Does Softbank SMS and MMS works after you install WP7? I'm using X02T and interested to flash to WP7.5 but I use SMS and MMS.
Click to expand...
Click to collapse
SMS work, but i dont know abou MMS, because i dont have Internet Plan.
WIFI, SMS, CALL is working fine, Market work after get the new serial with Microsft.
eekthecat said:
SMS work, but i dont know abou MMS, because i dont have Internet Plan.
WIFI, SMS, CALL is working fine, Market work after get the new serial with Microsft.
Click to expand...
Click to collapse
SMS work mean you can sent the message via reply it?
ryo2456 said:
SMS work mean you can sent the message via reply it?
Click to expand...
Click to collapse
Yes, you can send or reply SMS normally
how did you manage to solve the problem on hang on resetting...
---------- Post added at 06:43 PM ---------- Previous post was at 06:38 PM ----------
eekthecat said:
Aftrer flash the Bootloader WP7, i can put phone in Download mode (blue led). Choose multi—download and put the 3 files (flash.bin,NPRG8650.hex, partition.mbn) and start! But after press start in "Common downloader V4.7.20 For Android" Begin download the NPRG8650.hex and RAM, and download the partition.mbn and start RESETTING, soo after 15 sec get error Reset Fail.
Pls someone hava any idea?
Click to expand...
Click to collapse
how did you solved this problem... mind if you give me a pm on how to solved this... Thank You..
Related
Hi, my device version is i780BVGK3, i have download some flashing guide, but "hold down ENTER and FUNCTION keys'' doesn't work so mirage detect nothing ...
Also do i need do flash the russian roms and then some eng roms before flashing to wm 6.5 as is in that quide ???
(the function key is probably the black/white key for writing numbers ???)
Btw is there any other way to flash (sd card, other program)
And the official firmware updater also don't work, ask me to press ok to reset device and then .... try again, can't acess device
I really don't want that buggy WM6.0, help
Sekac79 said:
Hi, my device version is i780BVGK3, i have download some flashing guide, but "hold down ENTER and FUNCTION keys'' doesn't work so mirage detect nothing ...
Also do i need do flash the russian roms and then some eng roms before flashing to wm 6.5 as is in that quide ???
(the function key is probably the black/white key for writing numbers ???)
Btw is there any other way to flash (sd card, other program)
And the official firmware updater also don't work, ask me to press ok to reset device and then .... try again, can't acess device
I really don't want that buggy WM6.0, help
Click to expand...
Click to collapse
Question is quite a range to make an right answer.
Try to disable antivirus filrewalls on pc before trying to flash.
Firewall and antivirus disabled, still not working (official updater to wm6.1 - "timeout, try again") ... maybe windows7 problem ???
But the flashing by mirage, power on with pressed ENTER and ALT buttons also does nothing, phone boots normally and mirage doesn't detect
ALT button is that black/white for input numbers ?
I press them down and then power, hold everything together but nothing happens ...
Sekac79 said:
Firewall and antivirus disabled, still not working (official updater to wm6.1 - "timeout, try again") ... maybe windows7 problem ???
But the flashing by mirage, power on with pressed ENTER and ALT buttons also does nothing, phone boots normally and mirage doesn't detect
ALT button is that black/white for input numbers ?
I press them down and then power, hold everything together but nothing happens ...
Click to expand...
Click to collapse
Holding buttons then releasing "power", device going to power up, but keep other buttons pressed till boot screen appears. Yes win 7 is not supported, but you can manage it by some ways. Use XP or Vista.
still cannot acces boot screen, should be phone clean (hard reset) ?
sim and memory card removed, but no effect, phone hang for some time with SAMSUNG on screen, but then boot normally :/
Sekac79 said:
still cannot acces boot screen, should be phone clean (hard reset) ?
sim and memory card removed, but no effect, phone hang for some time with SAMSUNG on screen, but then boot normally :/
Click to expand...
Click to collapse
It must to enter loader mode this way or its not sgh-i780
Try to update via mirage updater on xp computer.http://forum.xda-developers.com/showpost.php?p=8154552&postcount=1117
Ok, the solution was to upgrade to the official wm6.1, after this the boot screen become accessible, before really NOT !
Now i am using your wm 6.5 final and it works (especially the mouse) like a charm, thank you for your advice and really good rom
Btw maybe you should mention somewhere in your flashing guide that if the boot screen is not accessible the official upgrade is required
windows 7 or XP?
Sekac79 said:
Ok, the solution was to upgrade to the official wm6.1, after this the boot screen become accessible, before really NOT !
Now i am using your wm 6.5 final and it works (especially the mouse) like a charm, thank you for your advice and really good rom
Btw maybe you should mention somewhere in your flashing guide that if the boot screen is not accessible the official upgrade is required
Click to expand...
Click to collapse
Hi, congratulation on your successful upgrade to winmo 6.5.
Did you finally able to do the upgrading with a windows 7 PC?
I only have a windows 7 PC, i wonder if i have to borrow an XP machine from a friend to do this.
Thanks..
blumedic said:
Hi, congratulation on your successful upgrade to winmo 6.5.
Did you finally able to do the upgrading with a windows 7 PC?
I only have a windows 7 PC, i wonder if i have to borrow an XP machine from a friend to do this.
Thanks..
Click to expand...
Click to collapse
Here is win7 64(32) bit flashing guide http://forum.xda-developers.com/showthread.php?p=4866182#post4866182
first methode mensioned on this post works very well. Only from myself I should to notice that you should load win7 in "test mode" to install attached drivers.
Personally im on win7 64 bit and using this driver.
I haven't try in win7, official wm6.1 upgrade doesn't work in win7 so i go to my "xp pc friend" and there made complete flashing - wm6.1 from samsung site and wm6.5 through mirage ...
Sekac79 said:
I haven't try in win7, official wm6.1 upgrade doesn't work in win7 so i go to my "xp pc friend" and there made complete flashing - wm6.1 from samsung site and wm6.5 through mirage ...
Click to expand...
Click to collapse
So then this is for you too
Hi there,
First of all, I must say that I tried almost every solution to resurrect my device, but I've failed.
Yesterday I decided to update the ROM on my TG01, so I downloaded a 6.5 Lite ROM, and used the PIN method as usual. But the device stucked in the black screen, so I removed the battery and linked the PINs again. WTF?! What I see is, only a black screen, no icons, nor logo.
Tried to hard reset by pushing volume up+camera button+power button too, but the result was the same, device just vibrates, and the screen does not show anything except a blank black screen.
And am I the only one having problem with the TGTool? When I clicked on TGTool, it just opens and closes.
Need your help again, thanks in advance fellas.
El Diablo said:
Hi there,
First of all, I must say that I tried almost every solution to resurrect my device, but I've failed.
Yesterday I decided to update the ROM on my TG01, so I downloaded a 6.5 Lite ROM, and used the PIN method as usual. But the device stucked in the black screen, so I removed the battery and linked the PINs again. WTF?! What I see is, only a black screen, no icons, nor logo.
Tried to hard reset by pushing volume up+camera button+power button too, but the result was the same, device just vibrates, and the screen does not show anything except a blank black screen.
And am I the only one having problem with the TGTool? When I clicked on TGTool, it just opens and closes.
Need your help again, thanks in advance fellas.
Click to expand...
Click to collapse
Removing the battery in that situation is not recommended and it is possible you may have bricked the device. I would recommend reading up the posts in the ROM thread - one in particular by Lasarek, here.
Hopefully if you follow the advice, you will be successful in resurrecting your TG01; if not, then the only known cure is to send to the Toshiba service centre and get the MB replaced.
Thanks for the reply,
As I mentioned, I've tried solution which you have linked in your post, but I couldn't manage to run the TGTool properly, because the program closes after I click on it. To be sure, I tested with two other PCs, and I can say that there is exactly aproblem with the TGTool.
El Diablo said:
Thanks for the reply,
As I mentioned, I've tried solution which you have linked in your post, but I couldn't manage to run the TGTool properly, because the program closes after I click on it. To be sure, I tested with two other PCs, and I can say that there is exactly aproblem with the TGTool.
Click to expand...
Click to collapse
Just a couple of thoughts at this point...
- There are 2 versions of TGTool - Cedesmith updated with some minor changes from v1.2 to v1.3; best I can think of at this point is a) re-download the version you have tried (and try again) b) try the alternate version of TGTool.
- Also, it has been reported before that the process doesn't work on Windows 7 X64, but will do on eg. XP. What OS are you running on the host PC(s) ?
El Diablo said:
Thanks for the reply,
As I mentioned, I've tried solution which you have linked in your post, but I couldn't manage to run the TGTool properly, because the program closes after I click on it. To be sure, I tested with two other PCs, and I can say that there is exactly aproblem with the TGTool.
Click to expand...
Click to collapse
It seems that you're dealing with TGTool the wrong way
Creat a folder on desktop and name it TG01
Put inside tgtool, and Official rom, name it TG01.tsw
now press start menu, run, type cmd
type cd desktop/tg01
then type tgtool -dec tg01.tsw tg01.bin
and then you'll have tg01.bin necessary for tg downloader
download tg downloader from lasarek's post and follow instructions
NOTE: your PC should recognise your phone as tg download port
if not, then you have to send it to Toshiba service..
Hope this helps
Thank all of you for your useful posts, I really appreciate it, but lasarek's link does not include the all programs I need, only TG01 Driver is downloadable. Can you upload the files (TG01 Downloader-TG01.bin)?
El Diablo said:
Thank all of you for your useful posts, I really appreciate it, but lasarek's link does not include the all programs I need, only TG01 Driver is downloadable. Can you upload the this files (TG01 Downloader-TG01.bin)?
Click to expand...
Click to collapse
Here is the TG Downloader...
Good luck
You are the man! Will try and report.
Err, Megaupload informs me about all free slots are full. Can you upload it to another site (like Rapidshare)?
El Diablo said:
Err, Megaupload informs me about all free slots are full. Can you upload it to another site (like Rapidshare)?
Click to expand...
Click to collapse
Hi, I'm sorry it's being temperamental. Megaupload normally works fine (and I can access other files I've loaded ther without any issues just now). There is though sometimes a delay between uploading and the file being readily accessible. Request you try again in a while or in the morning and see if you can d/l OK.
I need to t01a with rom format. tsw, I have tried many times but my pc are in the process of conver error, he does a rom that you do me please
thanks all
wafeeq, kevinpwhite, and of course Lasarek_Poland,
Thank you so much for your continous support, now my device is working flawlessly again.
alo_tongdaiday said:
I need to t01a with rom format. tsw, I have tried many times but my pc are in the process of conver error, he does a rom that you do me please
thanks all
Click to expand...
Click to collapse
What are you using as OS on your PC? Windows 7 receives a lot of error messages, I guess.
El Diablo said:
wafeeq, kevinpwhite, and of course Lasarek_Poland,
Thank you so much for your continous support, now my device is working flawlessly again.
Click to expand...
Click to collapse
Many thanks for the acknowledgement; delighted you are up and running again. That's brilliant news
alo_tongdaiday said:
I need to t01a with rom format. tsw, I have tried many times but my pc are in the process of conver error, he does a rom that you do me please
thanks all
Click to expand...
Click to collapse
I have no direct knowledge of the T01a, but there are several more specific threads which deal with this version of the device in the ROM forum. May be worth a slow browse through if you've not already done so ?
El Diablo said:
What are you using as OS on your PC? Windows 7 receives a lot of error messages, I guess.
Click to expand...
Click to collapse
so, now I'm using win7
Do you have any chance to try on a PC which uses Windows XP?
El Diablo said:
wafeeq, kevinpwhite, and of course Lasarek_Poland,
Thank you so much for your continous support, now my device is working flawlessly again.
Click to expand...
Click to collapse
I'm happy for you, I hope my device can work too
Glad I could help
Why is that? Which error do you receive?
El Diablo said:
Do you have any chance to try on a PC which uses Windows XP?
Click to expand...
Click to collapse
unfortunately now all 3 of my pc is using Windows 7, you can link any file t01a ROM. tsw it for me please
After downgrade to 6.5 with program downloader 4. When i use camera+ power i have white led and on screen i have white text : MOD fs_device. C 0248
This screen after 10-20 second turn of and led is red.
Please help.
bahni said:
After downgrade to 6.5 with program downloader 4. When i use camera+ power i have white led and on screen i have white text : MOD fs_device. C 0248
This screen after 10-20 second turn of and led is red.
Please help.
Click to expand...
Click to collapse
1.program downloader ? TG Downloader, yes? 2. which 6.5.x ROM as .bin you have flash? 3. what exactly you are planning, why use camera+ power key?
I use camera and power becouse only this combination do something with phone.
I flash bin Nokser rom.
i use program downloader 4 from nicola92 post.
it will just do this with noksers wm6.5.x rom
i also had the screen MOD fs_device. C 0248
just flash a different wm6.5.x rom or whatever other rom you want its just noksers rom that did this to me
How you upload rom? Becouse after 10 second screen turn off.
jonnyhall1bmx1 said:
just flash a different wm6.5.x rom or whatever other rom you want its just noksers rom that did this to me
Click to expand...
Click to collapse
After that, the phone displays a green light, vibrates and all. Now TG downloader doesn t even see the phone/
OK which ROM will it NOT do it with that will restore my phone as I have this problem as well. Please a link to a bin file would be excellent (So I don't have to convert it as I don't know how).
I have to say I feel a bit nervous about flashing something that doesn't have the 0321 radio, or shouldn't I be worried about that?
---------- Post added at 01:47 AM ---------- Previous post was at 01:45 AM ----------
propeller_nf88 said:
After that, the phone displays a green light, vibrates and all. Now TG downloader doesn t even see the phone/
Click to expand...
Click to collapse
Ah.. welcome to my world :-( Are you trying a bin file or a tsw file? (And why does it seem to work for some people and not for others??)
There MUST be something common here. Either people have different versions of phones OR we are all making the same mistake somewhere?
For example: I had to go into the device manager and manually update/reinstall the drivers for the wm6.5 bootloader drivers and the wp7 bootloader driver, as otherwise it wouldn't see the phone.
Also.. I'm flashing bin files. I figure the cable is fine as well as it seems to install the bootloader so I can flash, and the phone restarts when it should etc.
I was looking round for this MOD 248 thing, and the phone not booting, and it looks like back in October 'nyl' and a few others were getting this issue, yet still managed to recover there phones. So don't lose hope
I don't know why, but it seems like certain bin files work for some people but not for others? Very strange.
If anyone has some other bin files (WM6.5 AND WP7 that they know will work, please link to them )
Thanks!
Scougar said:
I was looking round for this MOD 248 thing, and the phone not booting, and it looks like back in October 'nyl' and a few others were getting this issue, yet still managed to recover there phones. So don't lose hope
I don't know why, but it seems like certain bin files work for some people but not for others? Very strange.
If anyone has some other bin files (WM6.5 AND WP7 that they know will work, please link to them )
Thanks!
Click to expand...
Click to collapse
hi, i don't know much over the qpst upgrade method- but few user here with same/similar issue (flash! although get a checksumm error!) have managed it succesfull ...........
Hey mirolog
Do you have a working link to your mirom8 wm6.5 build please? I assume I will need to change radio on it from 300 to 321 before I flash though as well?
I will try the QPST method if another rom doesn't solve my issue.
Scougar said:
Hey mirolog
Do you have a working link to your mirom8 wm6.5 build please? I assume I will need to change radio on it from 300 to 321 before I flash though as well?
I will try the QPST method if another rom doesn't solve my issue.
Click to expand...
Click to collapse
hi Scougar
miRom 8 radio 1600: http://www.multiupload.com/VDJGVNXJ6Y
miRom 8 radio 0300: http://www.multiupload.com/RP1WJZKA48
miRom 7 radio 0321: http://www.multiupload.com/CBZG3QUHAD
and the 0321: http://www.multiupload.com/CS80W6QP8E if you like to change a ROM to 0321 Radio
good luck, my friend , miro
Thanks mirolg
Downloading now. Will let you know later. I also found a 0321 tsw file on my sd card, and have used TG Tool to decrypt it to a bin file, so if your's doesn't work I'll try this one as well
Didn't work :-( MOD 248 issue again. Retried wp7 just in case.. no good lol.
maybe qpst only way then.
I had this problem and i and i have not solved it yet. What happend?
1. At this point " 5. Install tg downloader and the 32 bit driver." driver not installed properly ....Qualcomm .... with red x. My OS is XP sp3 32bit
2. At this point " 10. Start download. on the 99% stay 1-2 min. PLEASE wait the 100% and the auto reboot " ... i get error ... invalid checksum , phone rebooted
I installed ZTEiT Common downloader and the acer f1 driver ... no problem
pressing and holding Camera + Power button get me Blue led . i flashed wp7 , phone rebooted, but nothing on the screen,
I tried to get back to wm 6.5 but at the end after reboot i get on the screen this code
MOD 0248, I tried many times and various wm6.5 ROM till i made a big mistake: flashing without SD card inside, after that PC does not recognized my TG01, I thought its bricked becouse it could not get in to downloader mode, no white led, only green, no message on the screen. I charge the battery via USB cable cut until 4,15 V in vain, nothing happend. I hope it will help others to see what risk assumes. good luck !
I see no reason why flashing without the SD card in would cause an issue.
Note: Rapidly flashing orange/red light normally means battery is too low/depleted... so recharge using either the USB cable cut trick, or buy a cheap mobile phone battery EXTERNAL charger. (One that you take the battery out to charge with).
This really does seem now to be a common theme. What the heck is going on here? Do some people have slightly different model phones, or are we doing something ever so slightly wrong?
Also: If i hold down Camera + Up Volume + Power, I get the message "checking ftm mode Shared memory RPC Failed! - Spin Forever!". Now does this mean it's not actually in ftm mode?
Bah. Just tried using TG Downloader on a Windows XP Virtual Machine. I cannot get it to open the port. Regardless of whether I have installed drivers. Even tried setting the COM Ports to be the same value in a vain hope, or installing the drivers into W7 as well, but no use :-(
It was mentioned about having to use TG01C but I can only use (on my XP Laptop) TG01W, otherwise it doesn't open the port and flash. Do I need a slightly different boot loader for my phone or something?
The bit I REALLY don't get is that unless you manually install the drivers for the phone (I.e. going into the device manager, and selecting the folder, and then letting it pick up that you have plugged in a TG QDLoader... it won't work. BUT.. the guide makes absolutely no mention of this? This seems odd.
Well... I've tried:
Different cables
Different ROM's (WP7 and WM6.5) mirolg's and nokser's
Decoding Different ROM's
Redownloaded bootloaders from different sources
Charged the battery 100% in an external charger each time
How the heck am I going to get out of the MOD 248 situation (wm6.5) / Green light (WP7)
What other options for flashing are open to me? I can't boot wm6.5 or wp7 :-( Does my phone need a different boot loader perhaps?
I do not believe my phone is bricked, because it does have a display and it can sometimes tell me the FTM check failed (using different buttons to force the FTM option). "nyl" managed to get out of this MOD 248 situation with a different ROM, but I can't for some reason.
I am scared to flash any other rom than a 0321 rom, although I can obviously change radio's on other rom's if need be.
it's really depressing to see you're trying to flash the wp7 without any sucess . so sorry for you. wp7 bootloader from my [guide] werks very well. I think it not exist a another or different wp7 bootloader.
I like to help you, but I don´t know nothing over this MOD 248 issue. In other thread i have read, one user with same/similar issue, solved it with flash with qpst method .........
have you try it?
Don't think I can do QPST method if I can't load anything? (I've had three ciders tonight so forgive me - we came second in the pub quiz.. our first win (top three!) lol ;-) )
Will look into it.
I realise I kinda vocal on my issue - and let me state right now: "I do NOT blame you guys, I thank you so VERY MUCH for creating these WP7 ROM's, you only have my upmost respect "
I do actually see a fair number of people saying they were unable to flash correctly (i.e. Stuck between WM6.X and WP7 :-( ) So I figure I have to keep trying so that I can provide a solution for those people as well. Maybe I can compare my phone model/year/serial number/place of manufacturer etc to other people that are having issues, and those that had success?
Hi all, I have problem with nokia care suite,
i follow the tutorial for debranding lumia 800 (I have Tmobile DE) but when it comes to step "click programming and choose refurbrish" i can't do that =( because if i click the programming tab it doesn't do anything =(
i think i did everything correct, i downloaded the fw version changed the product code, the grey cube button turned to green, also the program recognize my phone and shows "USB1-RM801" but i can't flash it....
also i tried every usb ports on my computer
p.s. I use windows 7 64bit and original usb cable.
I hope someone can help me
eccomania said:
Hi all, I have problem with nokia care suite,
i follow the tutorial for debranding lumia 800 (I have Tmobile DE) but when it comes to step "click programming and choose refurbrish" i can't do that =( because if i click the programming tab it doesn't do anything =(
i think i did everything correct, i downloaded the fw version changed the product code, the grey cube button turned to green, also the program recognize my phone and shows "USB1-RM801" but i can't flash it....
also i tried every usb ports on my computer
p.s. I use windows 7 64bit and original usb cable.
I hope someone can help me
Click to expand...
Click to collapse
What error are you getting?
Have you tried using Recover instead of Refurbish?
anseio said:
What error are you getting?
Have you tried using Recover instead of Refurbish?
Click to expand...
Click to collapse
the problem is i don't get any errors or anything, the programming button doesn't work at all, when i click nothing happens, not even opening the refurbrish or recover droplist...
eccomania said:
the problem is i don't get any errors or anything, the programming button doesn't work at all, when i click nothing happens, not even opening the refurbrish or recover droplist...
Click to expand...
Click to collapse
Are you following this process?
http://forum.xda-developers.com/showthread.php?t=1457341
anseio said:
Are you following this process?
http://forum.xda-developers.com/showthread.php?t=1457341
Click to expand...
Click to collapse
yes i tried that method too.. but no luck =(
i can't click programming button thats the problem... it's kinda deactivated I think
Are you opening product code RM-801 or have you moved the firmware to a different folder? Not much can be done from the RM-801 folder.
I'm just having problems installing Nokia Care Suite. It gets so far and I get a 1220 error.
Any ideas?
Sent from my iPad using Tapatalk HD
It's some odd registry error, right? I think you just click through it. You'll have to navigate to the program folder to open the launcher. IIRC, that's what I had to do.
eccomania said:
yes i tried that method too.. but no luck =(
i can't click programming button thats the problem... it's kinda deactivated I think
Click to expand...
Click to collapse
so, how did you solve this problem? Ive got exactly same trouble wasting my time for days...
Do You ha e a screenlock code on the device. I had to remove my Outlook account, which requires a screenlock code, remove the code and then I was good to go.
Sent from my Lumia 800 using Board Express
anseio said:
Are you opening product code RM-801 or have you moved the firmware to a different folder? Not much can be done from the RM-801 folder.
Click to expand...
Click to collapse
This. In order for the Programming menu to be available, you need to select "Open Product" from the File menu and choose the correct product code (RM-819, RM-801, etc.).
My problem is I can never get passed the "Checking Mode" or "Starting" stage. I keep pressing the volume up button + insert USB cable until I feel a short vibration. After that, Windows will recognise my device as DLOAD and after a short while, the device restarts. Nokia Case Suite will then prompt me to unplug the USB cable, shutdown the device and do the volume up + insert USB cable routine again. Rinse and repeat. What did I do wrong? I am using Windows 7 64-bit.
EDIT: I solved my problems by going to the C:\Program Files (x86)\Nokia\Nokia Care Suite\Drivers\ directory and manually installing all the x64 drivers.
Im also having a few problems with NCS... i just figured I would piggy back off this thread rather than start a whole new one....
When installing I get a error that says.... "ERROR 1904.Module C:\Program Files (x86)\CommonFiles\nokia\Service Layer \C\Service Modules\ServiceModule_00003\msml4.dll failed to register" I hit ignore but now when i connect my phone to my PC... it isnt being recognized as DLOAD or QC or anything. I am at a loss... i went through and installed the drivers that were in the Nokia folder manually, except one it wouldnt install for some reason. Any help would be greatly appreciated.
I am having the same problem on my lumia 920. I didn't find a solution yet. This thread is the only thing I found so far.
Edit: I tried ncs on x64 w7 and x86 w8
Not starting
my phone is not sarting after installing nopkia evolve
eccomania said:
Hi all, I have problem with nokia care suite,
i follow the tutorial for debranding lumia 800 (I have Tmobile DE) but when it comes to step "click programming and choose refurbrish" i can't do that =( because if i click the programming tab it doesn't do anything =(
i think i did everything correct, i downloaded the fw version changed the product code, the grey cube button turned to green, also the program recognize my phone and shows "USB1-RM801" but i can't flash it....
also i tried every usb ports on my computer
p.s. I use windows 7 64bit and original usb cable.
I hope someone can help me
Click to expand...
Click to collapse
I had same stupid problem. You have to change your o.s.country and region from control panel. Try UK or USA. Both will work..
Hope this will help.
So DFT have released a custom rom for the radar, I was wondering if someone could maybe post a step by step guide on how to install the custom rom. I am new to windows phones so I could really do with some help as I really need this rom because it fully unlocks the device.
Yeah +1
I agree...I'm too newbie to all this...have just purchased htc radar yesterday ( my first windows phone) i read the explaination of rom but didn't get that ....what is RUU and all other stuff? please help guys
I would also love for a quick step by step, I'm very familiar with rooting Android phones but Windows is new territory for me. Thanks in advance!
RickyG3188 said:
I would also love for a quick step by step, I'm very familiar with rooting Android phones but Windows is new territory for me. Thanks in advance!
Click to expand...
Click to collapse
+1, I also need it!
I guess no one is listening us..... I'm new to htc and windows its my first htc and windows phone and i don't know a **** about it !!
Hey guys... It's more complicated than rooting an android, but the best step by step I have seen so far is this one by Drogonide. It is a post within the [DFT] HSPL for HTC WP7 Second Generation post:
Here you go --->
I haven't done it yet because I have a Macbook, and it's a no go without windows. It says Titan, but a couple Radar users also confirm the steps to work for them. Other than this, you're going to have to research. That goes double if you have to use a Y-cable and goldcard.
That's pretty much all I know so far, so I hope it helps. Hard bein a n00b!
is there any guide to goldcard?
actualy i followed the second post http://forum.xda-developers.com/showpost.php?p=26825741&postcount=2 (Installation for OMEGA) and it went well!
if you succeed in step 1., proceed to step 9.
i did that and got it!
Even if you get "Invalid vendor ID"?
Sent from my Radar C110e using Board Express
GlorFinderIV said:
Even if you get "Invalid vendor ID"?
Sent from my Radar C110e using Board Express
Click to expand...
Click to collapse
No, i didnt get "Invalid vendor ID", neither Country ID error
Here is a link that has some other basic instruction on gold card.
http://forum.xda-developers.com/showthread.php?t=1597837
I am so lucky then.... No way
Sent from my Radar C110e using Board Express
Which ROM should I flash?
I have a factory unlocked radar. I don't want to risk bricking my phone, so just confirming.
Any Htc Radar user has tried the rom without using that y -cable and gold card method? I mean i don't wanna buy that so if there is other mehod?
I installed the rom without any y cable/gold card.
Sent from my Radar 4G using Board Express
File_Submti said:
I installed the rom without any y cable/gold card.
Sent from my Radar 4G using Board Express
Click to expand...
Click to collapse
Could you help me through the process?
I put the phone into SPL mode but RomUpdateUtility says Error260 (Connection). It doesn't seem to detect my phone. :/
Even windows says unable to install driver once I plug in the USB in SPL mode.
FarazPatankar said:
I put the phone into SPL mode but RomUpdateUtility says Error260 (Connection). It doesn't seem to detect my phone. :/
Even windows says unable to install driver once I plug in the USB in SPL mode.
Click to expand...
Click to collapse
so there is the problem - windows divers.
in my case windows 7 automaticaly installed some qualcomm drivers, when in spl mode connected the phone via USB. then i had no problems with RUU.
FarazPatankar said:
I put the phone into SPL mode but RomUpdateUtility says Error260 (Connection). It doesn't seem to detect my phone. :/
Even windows says unable to install driver once I plug in the USB in SPL mode.
Click to expand...
Click to collapse
Looks like you didn't install something important.
If you are using Windows XP, search and download ActiveSync on Microsoft website.
If you are using Windows Vista/7/8, search and download Microsoft Windows Mobile Device Center on Microsoft website.
Then your connection error should be solved.
mrgongyue said:
Looks like you didn't install something important.
If you are using Windows XP, search and download ActiveSync on Microsoft website.
If you are using Windows Vista/7/8, search and download Microsoft Windows Mobile Device Center on Microsoft website.
Then your connection error should be solved.
Click to expand...
Click to collapse
Ok...thanks for the help !! I'm too getting Error 260 googled it and they said u have to reset the phone first...or maybe i'll try downloading mentioned above
btw did you reset the phone before RUU thing