Hi there,
First of all, I must say that I tried almost every solution to resurrect my device, but I've failed.
Yesterday I decided to update the ROM on my TG01, so I downloaded a 6.5 Lite ROM, and used the PIN method as usual. But the device stucked in the black screen, so I removed the battery and linked the PINs again. WTF?! What I see is, only a black screen, no icons, nor logo.
Tried to hard reset by pushing volume up+camera button+power button too, but the result was the same, device just vibrates, and the screen does not show anything except a blank black screen.
And am I the only one having problem with the TGTool? When I clicked on TGTool, it just opens and closes.
Need your help again, thanks in advance fellas.
El Diablo said:
Hi there,
First of all, I must say that I tried almost every solution to resurrect my device, but I've failed.
Yesterday I decided to update the ROM on my TG01, so I downloaded a 6.5 Lite ROM, and used the PIN method as usual. But the device stucked in the black screen, so I removed the battery and linked the PINs again. WTF?! What I see is, only a black screen, no icons, nor logo.
Tried to hard reset by pushing volume up+camera button+power button too, but the result was the same, device just vibrates, and the screen does not show anything except a blank black screen.
And am I the only one having problem with the TGTool? When I clicked on TGTool, it just opens and closes.
Need your help again, thanks in advance fellas.
Click to expand...
Click to collapse
Removing the battery in that situation is not recommended and it is possible you may have bricked the device. I would recommend reading up the posts in the ROM thread - one in particular by Lasarek, here.
Hopefully if you follow the advice, you will be successful in resurrecting your TG01; if not, then the only known cure is to send to the Toshiba service centre and get the MB replaced.
Thanks for the reply,
As I mentioned, I've tried solution which you have linked in your post, but I couldn't manage to run the TGTool properly, because the program closes after I click on it. To be sure, I tested with two other PCs, and I can say that there is exactly aproblem with the TGTool.
El Diablo said:
Thanks for the reply,
As I mentioned, I've tried solution which you have linked in your post, but I couldn't manage to run the TGTool properly, because the program closes after I click on it. To be sure, I tested with two other PCs, and I can say that there is exactly aproblem with the TGTool.
Click to expand...
Click to collapse
Just a couple of thoughts at this point...
- There are 2 versions of TGTool - Cedesmith updated with some minor changes from v1.2 to v1.3; best I can think of at this point is a) re-download the version you have tried (and try again) b) try the alternate version of TGTool.
- Also, it has been reported before that the process doesn't work on Windows 7 X64, but will do on eg. XP. What OS are you running on the host PC(s) ?
El Diablo said:
Thanks for the reply,
As I mentioned, I've tried solution which you have linked in your post, but I couldn't manage to run the TGTool properly, because the program closes after I click on it. To be sure, I tested with two other PCs, and I can say that there is exactly aproblem with the TGTool.
Click to expand...
Click to collapse
It seems that you're dealing with TGTool the wrong way
Creat a folder on desktop and name it TG01
Put inside tgtool, and Official rom, name it TG01.tsw
now press start menu, run, type cmd
type cd desktop/tg01
then type tgtool -dec tg01.tsw tg01.bin
and then you'll have tg01.bin necessary for tg downloader
download tg downloader from lasarek's post and follow instructions
NOTE: your PC should recognise your phone as tg download port
if not, then you have to send it to Toshiba service..
Hope this helps
Thank all of you for your useful posts, I really appreciate it, but lasarek's link does not include the all programs I need, only TG01 Driver is downloadable. Can you upload the files (TG01 Downloader-TG01.bin)?
El Diablo said:
Thank all of you for your useful posts, I really appreciate it, but lasarek's link does not include the all programs I need, only TG01 Driver is downloadable. Can you upload the this files (TG01 Downloader-TG01.bin)?
Click to expand...
Click to collapse
Here is the TG Downloader...
Good luck
You are the man! Will try and report.
Err, Megaupload informs me about all free slots are full. Can you upload it to another site (like Rapidshare)?
El Diablo said:
Err, Megaupload informs me about all free slots are full. Can you upload it to another site (like Rapidshare)?
Click to expand...
Click to collapse
Hi, I'm sorry it's being temperamental. Megaupload normally works fine (and I can access other files I've loaded ther without any issues just now). There is though sometimes a delay between uploading and the file being readily accessible. Request you try again in a while or in the morning and see if you can d/l OK.
I need to t01a with rom format. tsw, I have tried many times but my pc are in the process of conver error, he does a rom that you do me please
thanks all
wafeeq, kevinpwhite, and of course Lasarek_Poland,
Thank you so much for your continous support, now my device is working flawlessly again.
alo_tongdaiday said:
I need to t01a with rom format. tsw, I have tried many times but my pc are in the process of conver error, he does a rom that you do me please
thanks all
Click to expand...
Click to collapse
What are you using as OS on your PC? Windows 7 receives a lot of error messages, I guess.
El Diablo said:
wafeeq, kevinpwhite, and of course Lasarek_Poland,
Thank you so much for your continous support, now my device is working flawlessly again.
Click to expand...
Click to collapse
Many thanks for the acknowledgement; delighted you are up and running again. That's brilliant news
alo_tongdaiday said:
I need to t01a with rom format. tsw, I have tried many times but my pc are in the process of conver error, he does a rom that you do me please
thanks all
Click to expand...
Click to collapse
I have no direct knowledge of the T01a, but there are several more specific threads which deal with this version of the device in the ROM forum. May be worth a slow browse through if you've not already done so ?
El Diablo said:
What are you using as OS on your PC? Windows 7 receives a lot of error messages, I guess.
Click to expand...
Click to collapse
so, now I'm using win7
Do you have any chance to try on a PC which uses Windows XP?
El Diablo said:
wafeeq, kevinpwhite, and of course Lasarek_Poland,
Thank you so much for your continous support, now my device is working flawlessly again.
Click to expand...
Click to collapse
I'm happy for you, I hope my device can work too
Glad I could help
Why is that? Which error do you receive?
El Diablo said:
Do you have any chance to try on a PC which uses Windows XP?
Click to expand...
Click to collapse
unfortunately now all 3 of my pc is using Windows 7, you can link any file t01a ROM. tsw it for me please
Related
jump here: http://forum.xda-developers.com/showthread.php?t=347451
How to build your own rom: first download the kitchen, then replace the boot.rgu in XIP folder with the one abusalza attached in his thread. Then put the diskimage.nb0 in to rom folder (you can use jiggs'). Then double click dumpFiles.cmd, wait.....-> there will be 2 folder OEM&SYS created. Change things in those two, when finished-> double click BuildOS.cmd-> start-> wait........->close buidOS->wait the cmd window finishes, there'll be a diskimage created in Flash foder, copy and overwrite it to folder "ATOMWM607WWE6PP". And voila: you've got new rom
Okay, i'm trying to download it, would you upload to somewhere else else? mediafire seems have some trouble with my internet connection,. would you tell us more detail about, step by step installation, major and minor bugs, etc?what about you? have you tried your own ROM? does it works perfectly?
ofcourse I've tried it myself.
pp is 6MB
it has a bug: sim tool kit didn't work at all.
I don't know what happens to your network but I can download it very fast from here in Vietnam (with IDM). Can you ask somebody else to upload it to you ? I don't have much time to stay and wait for uploading it again.
steps to up this rom: download->unrar->connect your device with your pc by active sync-> double click Device Software Update Utility.exe-> then wait it,until finishing, easy hah ?
^^Downloading , will upload soon in about 30 - 45 minutes
Here's the link CLICK ME
medkid said:
ofcourse I've tried it myself.
pp is 6MB
it has a bug: sim tool kit didn't work at all.
I don't know what happens to your network but I can download it very fast from here in Vietnam (with IDM). Can you ask somebody else to upload it to you ? I don't have much time to stay and wait for uploading it again.
steps to up this rom: download->unrar->connect your device with your pc by active sync-> double click Device Software Update Utility.exe-> then wait it,until finishing, easy hah ?
Click to expand...
Click to collapse
do we need to enter to bootloader mode??
is it safe upgrading without entering to bootloader mode??
Flashing while in bootloader moder is safer although flashing without entering it would probably be successful but why take the chance
udayrulz said:
Flashing while in bootloader moder is safer although flashing without entering it would probably be successful but why take the chance
Click to expand...
Click to collapse
have you flash your atom with this rom?
how is it? succesfull?
is it faster mate?
Just about to man , waiting for it to charge up (was outta bat.)
Will let you know soon how it works mate.
udayrulz said:
Just about to man , waiting for it to charge up (was outta bat.)
Will let you know soon how it works mate.
Click to expand...
Click to collapse
thanks mate, i'll borrow my friend computer which use a faster broadband connection, might this help me to download the file,.
Mate , i am uploadin it too so dont bother borrowin the computer if you can download from rapidshare .
http://rapidshare.com/files/67638815/ATOMWM607WWE6PP.rar
udayrulz said:
Mate , i am uploadin it too so dont bother borrowin the computer if you can download from rapidshare .
Click to expand...
Click to collapse
great,. thanks uday,.
waiting for the link then,.
^^Link added to previous post
nice, its downloaded,.
well,. so many files,.
its a ROM Upgrade i've never done before,.
okay will try it,.
- Extract
- Connect Device by entering bootloader mode
- Run Software Update Utility
- Wait
was that right????
^^yes^^ , i am flashing it too now
Just finished with it , works fine
CONFIRMED!!
will write a short review soon
@medkid
Mate how am i suppose to run the flash plugin included , do i need to install the VLC player too coz i see you have included the plugin in the rom.
If i try to watch youtube video without installing the VLC player it gives me an error .
Am i doing something wrong??
okay,.
installed on my device already,.
well,.
i havent tried it any longer,.
but,. i like it for now,. hehe,.
hei medkid, what was that, the bottom line? color red, yellow, green??
I've included Flashvideobundle.cab in extended rom, if u installed it, you can go to start menu\programs\internet, you will see an IE shorcut right there.
But, you have to install TCPMP 0.72 to play FLV files directly from those sites
Garmin said:
okay,.
installed on my device already,.
well,.
i havent tried it any longer,.
but,. i like it for now,. hehe,.
hei medkid, what was that, the bottom line? color red, yellow, green??
Click to expand...
Click to collapse
that's your battery level, you will see it moving when it's charging
here's another link
http://www.megaupload.com/?d=7WZ7NS7C
udayrulz said:
here's another link
http://www.megaupload.com/?d=7WZ7NS7C
Click to expand...
Click to collapse
he he, thank you, but don't be so fast mate , I've built another rom when you upload it
first i tride to but another rom in my pocket (htc touch dual) then i follow the steps put the screen kept in color screen (bootloder) >>>
i try to format but it steel there and write in it :
NIKI100
SPL-1.17.0000
CPLD-4
please help me
you cold try hard reset:
power off
hold call+call disconnect buttons together, then while holding these press power on button.
but, i'd wait until someone whose tried flashing roms confirms this will reset back to original touch dual rom, as i havent tried flashing as of yet
Download MTTY and use Command "boot" if it doesnt work ... please tell us what you have done???
Why nobody cant use the search function and why on earth it is impossible to tell, what was the last thing you have try to get this error!!!
If you have get your OS back ... please dump your SPL and share it with me, for future development!
badaas said:
you cold try hard reset:
power off
hold call+call disconnect buttons together, then while holding these press power on button.
but, i'd wait until someone whose tried flashing roms confirms this will reset back to original touch dual rom, as i havent tried flashing as of yet
Click to expand...
Click to collapse
thamks but it not works
NetrunnerAT said:
Download MTTY and use Command "boot" if it doesnt work ... please tell us what you have done???
Why nobody cant use the search function and why on earth it is impossible to tell, what was the last thing you have try to get this error!!!
If you have get your OS back ... please dump your SPL and share it with me, for future development!
Click to expand...
Click to collapse
from where can i Download MTTY ??
here you are..
sackbauer said:
here you are..
Click to expand...
Click to collapse
thank you alot
but how to use it ????
i'm still waiting
hä? what do you mean - you want this tool but do not know how to use it ! for what reason do you want this tool then ?
disable active sync
connect phone trough usb and start program.
any more help -> try search function
i am off
sackbauer said:
hä? what do you mean - you want this tool but do not know how to use it ! for what reason do you want this tool then ?
disable active sync
connect phone trough usb and start program.
any more help -> try search function
i am off
Click to expand...
Click to collapse
thank you for helping
dont be engry from me becose i dont know how to use the program ..
i just want to end my proplem
NetrunnerAT said:
Download MTTY and use Command "boot" if it doesnt work ...
Click to expand...
Click to collapse
Make sure that right after you ENTER on the "boot" command you DISCONNECT the USB cable. That worked for me. Now I'm sporting the WWE ASIA rom.
aiondennis9000 said:
Make sure that right after you ENTER on the "boot" command you DISCONNECT the USB cable. That worked for me. Now I'm sporting the WWE ASIA rom.
Click to expand...
Click to collapse
thank you
all works but whene i update to wwe asia rom its stoped in 1% then my phone come in black screen then return back color screen bootlodere
do you know whats the problem ??
falojjah said:
thank you
all works but whene i update to wwe asia rom its stoped in 1% then my phone come in black screen then return back color screen bootlodere
do you know whats the problem ??
Click to expand...
Click to collapse
Basicly I did the following:
After recovering from the tri-color screen I did it according my own procedure to make sure it works:
1.) I placed the sspl-1.16-nike.exe on the Niki
2.) disconnect the USB
3.) Then renamed the hardspl-1.15mfg-nike.nbh to uspl-1.16-nike.nbh in the flash-uspl-niki folder
4.) run the sspl-1.16-nike.exe on the device
5.) connect the USB cable to device and desktop/laptop
6.) wait for it to say USB on the Niki
7.) flash the renamed uspl-1.16-nike.nbh with ROMUpdateUtility.exe from flash-uspl-niki
8.) ran the sspl-1.16-nike.exe on the Niki again
8.) and install the WWE ASIA rom afterwards.
Problem solved
ps: I stated 40 some hours of battery time compaired to the original T-mobile rom. Currently I am exceeding the 48hrs and have mad amount of batterylife to spare. Usage was 7% per 8,5hrs. You do the math. I am going to make 4 days with usage and 5 days would be without usage. I'll keep you posted.
falojjah said:
thank you
all works but whene i update to wwe asia rom its stoped in 1% then my phone come in black screen then return back color screen bootlodere
do you know whats the problem ??
Click to expand...
Click to collapse
please .... please!!
Read the hole Threads befor you do any thing!!!!!
Same Hacks are very complicate. If you dont wana read ... buy a normal Mobile Phone. I thing you dont want buy a 700us$ Phone and kick it one week later.
aiondennis9000 said:
Basicly I did the following:
After recovering from the tri-color screen I did it according my own procedure to make sure it works:
1.) I placed the sspl-1.16-nike.exe on the Niki
2.) disconnect the USB
3.) Then renamed the hardspl-1.15mfg-nike.nbh to uspl-1.16-nike.nbh in the flash-uspl-niki folder
4.) run the sspl-1.16-nike.exe on the device
5.) connect the USB cable to device and desktop/laptop
6.) wait for it to say USB on the Niki
7.) flash the renamed uspl-1.16-nike.nbh with ROMUpdateUtility.exe from flash-uspl-niki
8.) ran the sspl-1.16-nike.exe on the Niki again
8.) and install the WWE ASIA rom afterwards.
Problem solved
ps: I stated 40 some hours of battery time compaired to the original T-mobile rom. Currently I am exceeding the 48hrs and have mad amount of batterylife to spare. Usage was 7% per 8,5hrs. You do the math. I am going to make 4 days with usage and 5 days would be without usage. I'll keep you posted.
Click to expand...
Click to collapse
it works thanks alote
i dont beleve it
NetrunnerAT said:
please .... please!!
Read the hole Threads befor you do any thing!!!!!
Same Hacks are very complicate. If you dont wana read ... buy a normal Mobile Phone. I thing you dont want buy a 700us$ Phone and kick it one week later.
Click to expand...
Click to collapse
thank you for what you do for me
NetrunnerAT said:
please .... please!!
Read the hole Threads befor you do any thing!!!!!
Same Hacks are very complicate. If you dont wana read ... buy a normal Mobile Phone. I thing you dont want buy a 700us$ Phone and kick it one week later.
Click to expand...
Click to collapse
I read the whole thread before and I ended up as falojjah with a tri-color screen. My alternate procedure worked for me and now works for falojjah and all you can say is the above? pffff
falojjah said:
it works thanks alote
i dont beleve it
Click to expand...
Click to collapse
You're welcome buddy
Ooh and you might want to run TouchDual_FLO abnormal.exe just to be sure. It's on the HTC e-club download section.
aiondennis9000 said:
You're welcome buddy
Ooh and you might want to run TouchDual_FLO abnormal.exe just to be sure. It's on the HTC e-club download section.
Click to expand...
Click to collapse
Not all Roms need it!
Install it only, if you have a TouchFLO Problem. The most Roms have includ it!
NetrunnerAT said:
Not all Roms need it!
Install it only, if you have a TouchFLO Problem. The most Roms have includ it!
Click to expand...
Click to collapse
And to this downplay I say that it does make sense to install it because it clearly made Touchflo respond smoother and quicker on the WWE Asia rom. pfff
After downgrade to 6.5 with program downloader 4. When i use camera+ power i have white led and on screen i have white text : MOD fs_device. C 0248
This screen after 10-20 second turn of and led is red.
Please help.
bahni said:
After downgrade to 6.5 with program downloader 4. When i use camera+ power i have white led and on screen i have white text : MOD fs_device. C 0248
This screen after 10-20 second turn of and led is red.
Please help.
Click to expand...
Click to collapse
1.program downloader ? TG Downloader, yes? 2. which 6.5.x ROM as .bin you have flash? 3. what exactly you are planning, why use camera+ power key?
I use camera and power becouse only this combination do something with phone.
I flash bin Nokser rom.
i use program downloader 4 from nicola92 post.
it will just do this with noksers wm6.5.x rom
i also had the screen MOD fs_device. C 0248
just flash a different wm6.5.x rom or whatever other rom you want its just noksers rom that did this to me
How you upload rom? Becouse after 10 second screen turn off.
jonnyhall1bmx1 said:
just flash a different wm6.5.x rom or whatever other rom you want its just noksers rom that did this to me
Click to expand...
Click to collapse
After that, the phone displays a green light, vibrates and all. Now TG downloader doesn t even see the phone/
OK which ROM will it NOT do it with that will restore my phone as I have this problem as well. Please a link to a bin file would be excellent (So I don't have to convert it as I don't know how).
I have to say I feel a bit nervous about flashing something that doesn't have the 0321 radio, or shouldn't I be worried about that?
---------- Post added at 01:47 AM ---------- Previous post was at 01:45 AM ----------
propeller_nf88 said:
After that, the phone displays a green light, vibrates and all. Now TG downloader doesn t even see the phone/
Click to expand...
Click to collapse
Ah.. welcome to my world :-( Are you trying a bin file or a tsw file? (And why does it seem to work for some people and not for others??)
There MUST be something common here. Either people have different versions of phones OR we are all making the same mistake somewhere?
For example: I had to go into the device manager and manually update/reinstall the drivers for the wm6.5 bootloader drivers and the wp7 bootloader driver, as otherwise it wouldn't see the phone.
Also.. I'm flashing bin files. I figure the cable is fine as well as it seems to install the bootloader so I can flash, and the phone restarts when it should etc.
I was looking round for this MOD 248 thing, and the phone not booting, and it looks like back in October 'nyl' and a few others were getting this issue, yet still managed to recover there phones. So don't lose hope
I don't know why, but it seems like certain bin files work for some people but not for others? Very strange.
If anyone has some other bin files (WM6.5 AND WP7 that they know will work, please link to them )
Thanks!
Scougar said:
I was looking round for this MOD 248 thing, and the phone not booting, and it looks like back in October 'nyl' and a few others were getting this issue, yet still managed to recover there phones. So don't lose hope
I don't know why, but it seems like certain bin files work for some people but not for others? Very strange.
If anyone has some other bin files (WM6.5 AND WP7 that they know will work, please link to them )
Thanks!
Click to expand...
Click to collapse
hi, i don't know much over the qpst upgrade method- but few user here with same/similar issue (flash! although get a checksumm error!) have managed it succesfull ...........
Hey mirolog
Do you have a working link to your mirom8 wm6.5 build please? I assume I will need to change radio on it from 300 to 321 before I flash though as well?
I will try the QPST method if another rom doesn't solve my issue.
Scougar said:
Hey mirolog
Do you have a working link to your mirom8 wm6.5 build please? I assume I will need to change radio on it from 300 to 321 before I flash though as well?
I will try the QPST method if another rom doesn't solve my issue.
Click to expand...
Click to collapse
hi Scougar
miRom 8 radio 1600: http://www.multiupload.com/VDJGVNXJ6Y
miRom 8 radio 0300: http://www.multiupload.com/RP1WJZKA48
miRom 7 radio 0321: http://www.multiupload.com/CBZG3QUHAD
and the 0321: http://www.multiupload.com/CS80W6QP8E if you like to change a ROM to 0321 Radio
good luck, my friend , miro
Thanks mirolg
Downloading now. Will let you know later. I also found a 0321 tsw file on my sd card, and have used TG Tool to decrypt it to a bin file, so if your's doesn't work I'll try this one as well
Didn't work :-( MOD 248 issue again. Retried wp7 just in case.. no good lol.
maybe qpst only way then.
I had this problem and i and i have not solved it yet. What happend?
1. At this point " 5. Install tg downloader and the 32 bit driver." driver not installed properly ....Qualcomm .... with red x. My OS is XP sp3 32bit
2. At this point " 10. Start download. on the 99% stay 1-2 min. PLEASE wait the 100% and the auto reboot " ... i get error ... invalid checksum , phone rebooted
I installed ZTEiT Common downloader and the acer f1 driver ... no problem
pressing and holding Camera + Power button get me Blue led . i flashed wp7 , phone rebooted, but nothing on the screen,
I tried to get back to wm 6.5 but at the end after reboot i get on the screen this code
MOD 0248, I tried many times and various wm6.5 ROM till i made a big mistake: flashing without SD card inside, after that PC does not recognized my TG01, I thought its bricked becouse it could not get in to downloader mode, no white led, only green, no message on the screen. I charge the battery via USB cable cut until 4,15 V in vain, nothing happend. I hope it will help others to see what risk assumes. good luck !
I see no reason why flashing without the SD card in would cause an issue.
Note: Rapidly flashing orange/red light normally means battery is too low/depleted... so recharge using either the USB cable cut trick, or buy a cheap mobile phone battery EXTERNAL charger. (One that you take the battery out to charge with).
This really does seem now to be a common theme. What the heck is going on here? Do some people have slightly different model phones, or are we doing something ever so slightly wrong?
Also: If i hold down Camera + Up Volume + Power, I get the message "checking ftm mode Shared memory RPC Failed! - Spin Forever!". Now does this mean it's not actually in ftm mode?
Bah. Just tried using TG Downloader on a Windows XP Virtual Machine. I cannot get it to open the port. Regardless of whether I have installed drivers. Even tried setting the COM Ports to be the same value in a vain hope, or installing the drivers into W7 as well, but no use :-(
It was mentioned about having to use TG01C but I can only use (on my XP Laptop) TG01W, otherwise it doesn't open the port and flash. Do I need a slightly different boot loader for my phone or something?
The bit I REALLY don't get is that unless you manually install the drivers for the phone (I.e. going into the device manager, and selecting the folder, and then letting it pick up that you have plugged in a TG QDLoader... it won't work. BUT.. the guide makes absolutely no mention of this? This seems odd.
Well... I've tried:
Different cables
Different ROM's (WP7 and WM6.5) mirolg's and nokser's
Decoding Different ROM's
Redownloaded bootloaders from different sources
Charged the battery 100% in an external charger each time
How the heck am I going to get out of the MOD 248 situation (wm6.5) / Green light (WP7)
What other options for flashing are open to me? I can't boot wm6.5 or wp7 :-( Does my phone need a different boot loader perhaps?
I do not believe my phone is bricked, because it does have a display and it can sometimes tell me the FTM check failed (using different buttons to force the FTM option). "nyl" managed to get out of this MOD 248 situation with a different ROM, but I can't for some reason.
I am scared to flash any other rom than a 0321 rom, although I can obviously change radio's on other rom's if need be.
it's really depressing to see you're trying to flash the wp7 without any sucess . so sorry for you. wp7 bootloader from my [guide] werks very well. I think it not exist a another or different wp7 bootloader.
I like to help you, but I don´t know nothing over this MOD 248 issue. In other thread i have read, one user with same/similar issue, solved it with flash with qpst method .........
have you try it?
Don't think I can do QPST method if I can't load anything? (I've had three ciders tonight so forgive me - we came second in the pub quiz.. our first win (top three!) lol ;-) )
Will look into it.
I realise I kinda vocal on my issue - and let me state right now: "I do NOT blame you guys, I thank you so VERY MUCH for creating these WP7 ROM's, you only have my upmost respect "
I do actually see a fair number of people saying they were unable to flash correctly (i.e. Stuck between WM6.X and WP7 :-( ) So I figure I have to keep trying so that I can provide a solution for those people as well. Maybe I can compare my phone model/year/serial number/place of manufacturer etc to other people that are having issues, and those that had success?
Hi all, I have problem with nokia care suite,
i follow the tutorial for debranding lumia 800 (I have Tmobile DE) but when it comes to step "click programming and choose refurbrish" i can't do that =( because if i click the programming tab it doesn't do anything =(
i think i did everything correct, i downloaded the fw version changed the product code, the grey cube button turned to green, also the program recognize my phone and shows "USB1-RM801" but i can't flash it....
also i tried every usb ports on my computer
p.s. I use windows 7 64bit and original usb cable.
I hope someone can help me
eccomania said:
Hi all, I have problem with nokia care suite,
i follow the tutorial for debranding lumia 800 (I have Tmobile DE) but when it comes to step "click programming and choose refurbrish" i can't do that =( because if i click the programming tab it doesn't do anything =(
i think i did everything correct, i downloaded the fw version changed the product code, the grey cube button turned to green, also the program recognize my phone and shows "USB1-RM801" but i can't flash it....
also i tried every usb ports on my computer
p.s. I use windows 7 64bit and original usb cable.
I hope someone can help me
Click to expand...
Click to collapse
What error are you getting?
Have you tried using Recover instead of Refurbish?
anseio said:
What error are you getting?
Have you tried using Recover instead of Refurbish?
Click to expand...
Click to collapse
the problem is i don't get any errors or anything, the programming button doesn't work at all, when i click nothing happens, not even opening the refurbrish or recover droplist...
eccomania said:
the problem is i don't get any errors or anything, the programming button doesn't work at all, when i click nothing happens, not even opening the refurbrish or recover droplist...
Click to expand...
Click to collapse
Are you following this process?
http://forum.xda-developers.com/showthread.php?t=1457341
anseio said:
Are you following this process?
http://forum.xda-developers.com/showthread.php?t=1457341
Click to expand...
Click to collapse
yes i tried that method too.. but no luck =(
i can't click programming button thats the problem... it's kinda deactivated I think
Are you opening product code RM-801 or have you moved the firmware to a different folder? Not much can be done from the RM-801 folder.
I'm just having problems installing Nokia Care Suite. It gets so far and I get a 1220 error.
Any ideas?
Sent from my iPad using Tapatalk HD
It's some odd registry error, right? I think you just click through it. You'll have to navigate to the program folder to open the launcher. IIRC, that's what I had to do.
eccomania said:
yes i tried that method too.. but no luck =(
i can't click programming button thats the problem... it's kinda deactivated I think
Click to expand...
Click to collapse
so, how did you solve this problem? Ive got exactly same trouble wasting my time for days...
Do You ha e a screenlock code on the device. I had to remove my Outlook account, which requires a screenlock code, remove the code and then I was good to go.
Sent from my Lumia 800 using Board Express
anseio said:
Are you opening product code RM-801 or have you moved the firmware to a different folder? Not much can be done from the RM-801 folder.
Click to expand...
Click to collapse
This. In order for the Programming menu to be available, you need to select "Open Product" from the File menu and choose the correct product code (RM-819, RM-801, etc.).
My problem is I can never get passed the "Checking Mode" or "Starting" stage. I keep pressing the volume up button + insert USB cable until I feel a short vibration. After that, Windows will recognise my device as DLOAD and after a short while, the device restarts. Nokia Case Suite will then prompt me to unplug the USB cable, shutdown the device and do the volume up + insert USB cable routine again. Rinse and repeat. What did I do wrong? I am using Windows 7 64-bit.
EDIT: I solved my problems by going to the C:\Program Files (x86)\Nokia\Nokia Care Suite\Drivers\ directory and manually installing all the x64 drivers.
Im also having a few problems with NCS... i just figured I would piggy back off this thread rather than start a whole new one....
When installing I get a error that says.... "ERROR 1904.Module C:\Program Files (x86)\CommonFiles\nokia\Service Layer \C\Service Modules\ServiceModule_00003\msml4.dll failed to register" I hit ignore but now when i connect my phone to my PC... it isnt being recognized as DLOAD or QC or anything. I am at a loss... i went through and installed the drivers that were in the Nokia folder manually, except one it wouldnt install for some reason. Any help would be greatly appreciated.
I am having the same problem on my lumia 920. I didn't find a solution yet. This thread is the only thing I found so far.
Edit: I tried ncs on x64 w7 and x86 w8
Not starting
my phone is not sarting after installing nopkia evolve
eccomania said:
Hi all, I have problem with nokia care suite,
i follow the tutorial for debranding lumia 800 (I have Tmobile DE) but when it comes to step "click programming and choose refurbrish" i can't do that =( because if i click the programming tab it doesn't do anything =(
i think i did everything correct, i downloaded the fw version changed the product code, the grey cube button turned to green, also the program recognize my phone and shows "USB1-RM801" but i can't flash it....
also i tried every usb ports on my computer
p.s. I use windows 7 64bit and original usb cable.
I hope someone can help me
Click to expand...
Click to collapse
I had same stupid problem. You have to change your o.s.country and region from control panel. Try UK or USA. Both will work..
Hope this will help.
Hello friends, I'm having the error message: "brom error: ext_ram_exeption status (0xc005005)" when trying to install the leagoo kiicaa mix stock rom, how do I solve this problem?
Victor Oliveira said:
Hello friends, I'm having the error message: "brom error: ext_ram_exeption status (0xc005005)" when trying to install the leagoo kiicaa mix stock rom, how do I solve this problem?
Click to expand...
Click to collapse
Are you using SP Flash Tool on windows or linux?
I am using it on windows, but if necessary I can install Linux
Augustoandro said:
Are you using SP Flash Tool on windows or linux?
Click to expand...
Click to collapse
I am using it on windows, but if necessary I can install Linux
Victor Oliveira said:
I am using it on windows, but if necessary I can install Linux
Click to expand...
Click to collapse
Check out this link:
http://www.saransaro.com/how-to-guides/brom-error/
Augustoandro said:
Check out this link:
http://www.saransaro.com/how-to-guides/brom-error/
Click to expand...
Click to collapse
Okay, I'll try and re-post the result here
Augustoandro said:
Check out this link:
http://www.saransaro.com/how-to-guides/brom-error/
Click to expand...
Click to collapse
So I took a look at this link, but there is no solution to this error, would you have any other tips on how to help me?
me too
Same problem here, I think is corrupted preloader.
Anybody?
brudieu said:
Same problem here, I think is corrupted preloader.
Anybody?
Click to expand...
Click to collapse
I also think that's it, did you solve it?
Victor Oliveira said:
I also think that's it, did you solve it?
Click to expand...
Click to collapse
Try these steps on a linux system.
http://www.anythingultimate.in/2016/04/how-to-install-stock-rom-through.html?m=1
Augustoandro said:
Try these steps on a linux system.
http://www.anythingultimate.in/2016/04/how-to-install-stock-rom-through.html?m=1
Click to expand...
Click to collapse
But them it would just be to install the stock rom right? in my case th phone is bricked, just gets connecting and disconnecting when plugged into the computer
mine is till dead, I tried with linus but did not work
any Idea?
Victor Oliveira said:
But them it would just be to install the stock rom right? in my case th phone is bricked, just gets connecting and disconnecting when plugged into the computer
Click to expand...
Click to collapse
Yes
brudieu said:
mine is till dead, I tried with linus but did not work
any Idea?
Click to expand...
Click to collapse
Mine is still dead, I do not even know what to do anymore, is yours also the kiicaa mix?
Solution
I've been able to find a solution to the problem. First of all, you have to find another firmware for the phone, because as incredible as it may seem, it has two versions, but I can not find anywhere the difference between the two, but continuing after you find another firmware, you let the phone unload completely (in my case were 2 days and a few hours for it to unload, after that you open the spft and open the scatter file the spft will automatically look for the files, you wait for the files to load sea the only option to download and then click download, now just connect the phone on the pc hold the power + volume up buttons and expect to hear a connected noise, after that the spft will hold the flash normally on your phone.
Thanks to all who tried to help!
Victor Oliveira said:
I've been able to find a solution to the problem. First of all, you have to find another firmware for the phone, because as incredible as it may seem, it has two versions, but I can not find anywhere the difference between the two, but continuing after you find another firmware, you let the phone unload completely (in my case were 2 days and a few hours for it to unload, after that you open the spft and open the scatter file the spft will automatically look for the files, you wait for the files to load sea the only option to download and then click download, now just connect the phone on the pc hold the power + volume up buttons and expect to hear a connected noise, after that the spft will hold the flash normally on your phone.
Thanks to all who tried to help!
Click to expand...
Click to collapse
please, post the link to the firmware, I tried with two different ROMs and still dead.
thanks
brudieu said:
please, post the link to the firmware, I tried with two different ROMs and still dead.
thanks
Click to expand...
Click to collapse
I used this rom https://yadi.sk/d/OBnsnz2t3RMo2B
and SP_Flash_Tool_v5.1628
thanks Victor Oliveira your solution worked a treat many thanks and a thank you sent