Hi,
I just tryed to install MAGLDR111, i did have HSPL installed (no prob about that).
First i ran ROMUpdateUtility.exe as administrator, everything whas fine ...
At the beginning of the process of flashing MAGLDR111 to my device, i got
the screen with the red, green color (as usual when you flash HD2).
But then windows was trying to install Qualcomm driver, after a few sec, the install process of MAGLDR111 failed, but the Qualcomm driver succeed ... : (
The device stayed on the flasing screen.
Then i tryed to flash again MAGLDR111, and it succeeded !
But when i start my HD2 now i just have the energize boot screenshot (because i had energize WM ROM before ...)
nothing is happening ...... i plug the USB cable ... nothing is happening too (no OS booted on so ... )
PLEASE, GIVE ME A HAND !!
ps : sorry for my poor english
jediL said:
Hi,
I just tryed to install MAGLDR111, i did have HSPL installed (no prob about that).
First i ran ROMUpdateUtility.exe as administrator, everything whas fine ...
At the beginning of the process of flashing MAGLDR111 to my device, i got
the screen with the red, green color (as usual when you flash HD2).
But then windows was trying to install Qualcomm driver, after a few sec, the install process of MAGLDR111 failed, but the Qualcomm driver succeed ... : (
The device stayed on the flasing screen.
Then i tryed to flash again MAGLDR111, and it succeeded !
But when i start my HD2 now i just have the energize boot screenshot (because i had energize WM ROM before ...)
nothing is happening ...... i plug the USB cable ... nothing is happening too (no OS booted on so ... )
PLEASE, GIVE ME A HAND !!
Click to expand...
Click to collapse
ok
STOP BLAMING MAGLDR
Firstly your phone has not BRICKED..
Pres VOL down + reset
You will get the boot loader..
Flash a official Rom..
Good,
ok, i did press the volume down + reset.
I get the blue, red, green screen.
but i don't (think i get/see) the MAGLDR bootloader ( i don't see any option 4 ... as said on the tutorial).
should i reflash MAGLDR111 or just run DAF application via windows ?
Sorry about the name of the post : (. Didn't want to blame developpers, sry guys.
jediL said:
ok, i did press the volume down + reset.
I get the blue, red, green screen.
but i don't (think i get/see) the MAGLDR bootloader ( i don't see any option 4 ... as said on the tutorial).
should i reflash MAGLDR111 or just run DAF application via windows ?
Sorry about the name of the post : (. Didn't want to blame developpers, sry guys.
Click to expand...
Click to collapse
ok you have the tri colour screen,,, now first flash an official ROM ,
If the BOOTLOADER SAYS Cotulla HSPL, then u can install a CUSTOM rom too...
Then
Start the process all over again,
I just ran DAF application from DFT_Android folder, after wainting for USB i got an error message :
Error happen
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
Error Description: wait marker fails
Info: .\RSPL\BootLoader.cpp (225)
I'm downloading an official windows mobile ROM to install it now, i hope to have no trouble.
Thanks a lot for your help !
Official windows mobile ROM install succeeded.
I'm gonna try to start the process all over again ...
no no no dont flash official rom!
when powering up your device press end key, and magldr will appear.
Just keep pressing end key!
And if that doesn't work:
it means your hspl is outdated, so flash a new hspl.
This issue has already been reported on the MAGLDR thread, and those were the solutions, i think you needed hspl 2.08 if i'm not mistaken
I have the same problem, only I can't start the bootloader! What should I do?
Thanks Derek0228, my HSPL was outdated as you said.
I did Update it, then install MAGLDR111 and than flash the DFT android NAND build.
It's working very well !
(Thanks DFT !!)
problem solve : )
jediL said:
Thanks Derek0228, my HSPL was outdated as you said.
I did Update it, then install MAGLDR111 and than flash the DFT android NAND build.
It's working very well !
(Thanks DFT !!)
problem solve : )
Click to expand...
Click to collapse
You're welcome
Rushedby said:
I have the same problem, only I can't start the bootloader! What should I do?
Click to expand...
Click to collapse
When I restart my HD 2, it hang after "GO GO GO", I try to upload 3 different NAND source but still hang-up.
Please help me.
My HD2 cannot start bootloader too.
superguard said:
When I restart my HD 2, it hang after "GO GO GO", I try to upload 3 different NAND source but still hang-up.
Please help me.
My HD2 cannot start bootloader too.
Click to expand...
Click to collapse
Did you have the latest MagLdr 1.11.
yes, I have the latest MagLdr 1.11.
Until now, I can't start bootloader
My HD2: HTC HD2 (T8585)
Please anybody help me to resolve this problem, thank you
superguard said:
yes, I have the latest MagLdr 1.11.
Until now, I can't start bootloader
My HD2: HTC HD2 (T8585)
Click to expand...
Click to collapse
SD flash your WinMo O/S (except 3.14 ROM). Run HSPL2 to 2.08HSPL and make sure the RADIO is 2.08.50 or above. Then go through the Android flashing again - I would re-download the files, incase one is corrupt.
Flash a stock rom...
Sent from my HTC HD2 using XDA App
I can't run HSLP2 because my phone when start alway go directly to MagLdr menu. I try to press Vol Down + Power (or hard reset) but can not. My PC could not recognize the phone so can not run HSLP2.
And I also FLASHABLE USING CLOCKWORKMOD RECOVERY (http://forum.xda-developers.com/showthread.php?t=900478) but nothing change.
My phone: HD2 T8585
Magldr 1.11
superguard said:
I can't run HSLP2 because my phone when start alway go directly to MagLdr menu. I try to press Vol Down + Power (or hard reset) but can not. My PC could not recognize the phone so can not run HSLP2.
And I also FLASHABLE USING CLOCKWORKMOD RECOVERY (http://forum.xda-developers.com/showthread.php?t=900478) but nothing change.
My phone: HD2 T8585
Magldr 1.11
Click to expand...
Click to collapse
Try doing a hard reset - it should clear everything and then run HSPL to 2.08hspl and flash whatever you want MAgldr or WinRom ...
Related
I got a friends hd2 several days ago and it was stuck on the White splash screen and wouldn't go further.
I tried Hard reset with keys and it didn't helped to get past that screen.
So i decided to flash a new ROM.
First I installed 1.42.HSPL on it to make myself safe and tried to install WWE version but failed at 9 %.
After this i tried near all the steps from another thread on the forum, the one of italian guy who tried almost everything.
Strange thing is that after trying several roms and failing all the times at 9 %, the phone once booted into windows, and i got this information from it:
Radio 2.05.51.05_2
G 15.28.50.07U
Rom 1.48.406.1 (71294) FRE
But after powering it off it didn't boot up another time.
Also there was a small damage on one of the battery pins but I think i managed to get it soldered from outside with soldering iron.
I also tried with MTTY and it didn't work either.
I got the official rom 1.48.406.1 FRE (because this phone is from swiss operator in french language) but it doesn't flash it goes to 9 % and gives error 290.
Ok, i started the thread because I actually wante to ask the question, why i'm unable to get into the Flash process from SD Card.
I formatted SD and copied the LEOIMG.nbh from official ROM and other ROM's too but when i press Reset and hold volume Down key sometimes nothing happens screen is black, sometimes im going into Bootloader with Serial shown and this text:
"Upgrade ROM code error. Please try again" and in the top right corner its written RUUNBH.
Anyone has any idea what could be problem of this device?
Btw I own LEO too and i never faced any problem till now, it was originally in German Language and i flashed it to WWE and didn't get any problems like this one.
gjizaqin said:
I got a friends hd2 several days ago and it was stuck on the White splash screen and wouldn't go further.
I tried Hard reset with keys and it didn't helped to get past that screen.
So i decided to flash a new ROM.
First I installed 1.42.HSPL on it to make myself safe and tried to install WWE version but failed at 9 %.
After this i tried near all the steps from another thread on the forum, the one of italian guy who tried almost everything.
Strange thing is that after trying several roms and failing all the times at 9 %, the phone once booted into windows, and i got this information from it:
Radio 2.05.51.05_2
G 15.28.50.07U
Rom 1.48.406.1 (71294) FRE
But after powering it off it didn't boot up another time.
Also there was a small damage on one of the battery pins but I think i managed to get it soldered from outside with soldering iron.
I also tried with MTTY and it didn't work either.
I got the official rom 1.48.406.1 FRE (because this phone is from swiss operator in french language) but it doesn't flash it goes to 9 % and gives error 290.
Ok, i started the thread because I actually wante to ask the question, why i'm unable to get into the Flash process from SD Card.
I formatted SD and copied the LEOIMG.nbh from official ROM and other ROM's too but when i press Reset and hold volume Down key sometimes nothing happens screen is black, sometimes im going into Bootloader with Serial shown and this text:
"Upgrade ROM code error. Please try again" and in the top right corner its written RUUNBH.
Anyone has any idea what could be problem of this device?
Btw I own LEO too and i never faced any problem till now, it was originally in German Language and i flashed it to WWE and didn't get any problems like this one.
Click to expand...
Click to collapse
Not sure if this is the problem, but what size is your SD card? I've heard, that sometimes is impossible to flash from larger cards, safest way is to use cards up to 2GB...
CaponiND said:
Not sure if this is the problem, but what size is your SD card? I've heard, that sometimes is impossible to flash from larger cards, safest way is to use cards up to 2GB...
Click to expand...
Click to collapse
Actually the sd is original 2gb that comes with hd2.
Friend, try to flash hspl 2.08 !!
Most likely that is the problem.
Enter the bootloader and connect it via usb to your usb and install 2.08 hspl (search fo it on xda developer forum)
Before instaling it read the instruction so that you know that hspl 2.08 can be installed over the old version of hspl that you installed!!
Oh and update radio to atleast 2.07
2.14 is very good
PS
Did you perform task29 before flashing?
mladen.p said:
Friend, try to flash hspl 2.08 !!
Most likely that is the problem.
Enter the bootloader and connect it via usb to your usb and install 2.08 hspl (search fo it on xda developer forum)
Before instaling it read the instruction so that you know that hspl 2.08 can be installed over the old version of hspl that you installed!!
Oh and update radio to atleast 2.07
2.14 is very good
PS
Did you perform task29 before flashing?
Click to expand...
Click to collapse
I guess I should try to install 2.08 HSPL, do you think i can use the same HSPL installer and just install 2.08 hspl from it? Because i already tried 1.66.HSPL but didn't worked.
And yes i performed task29 two or three times it finishes with some known output message which is stated on the original MTTY thread to be ignored.
Any other ideas?
gjizaqin said:
I guess I should try to install 2.08 HSPL, do you think i can use the same HSPL installer and just install 2.08 hspl from it? Because i already tried 1.66.HSPL but didn't worked.
And yes i performed task29 two or three times it finishes with some known output message which is stated on the original MTTY thread to be ignored.
Any other ideas?
Click to expand...
Click to collapse
you have to flash the HSPL back to 1.42 0000 ,then update the HSPL to 2.08 HSPL directly. if you flash it from 1.66. it can not work..pls be noted. good luck to you .hope you leo can be used again.
zengxisheng said:
you have to flash the HSPL back to 1.42 0000 ,then update the HSPL to 2.08 HSPL directly. if you flash it from 1.66. it can not work..pls be noted. good luck to you .hope you leo can be used again.
Click to expand...
Click to collapse
Ok I installed 2.08.HSPL from 1.42.HSPL and it went successfully, now i see 2.08.HSPL on bootloader but it still fails to update ROM. Stops at 8 % on the phone with rectangle mark, and on the pc it stops at 9 %.
I get Error 290 - Unknown Command
But why i cant go into sd card flash screen when i press reset and volume down ?
I just used another 2 gb microSD and added LEOIMG.nbh from official FRE ROM and it doesnt work.
Hey bud,
I was having the same problem: the flashing didn't want to start by doing a reset+vol.down. I somehow got around this by putting the leoimg.nbh on my mircoSD card, and then started the flashing from my computer by running the .exe that contains the RUU (for ActiveSync flashing). This "magically" triggered the flashing from the mircoSD card (it showed me a screen whether i wanted to update leoimg.nbh). On this screen, pressing vol.down would start the flashing through ActiveSync, and pressing the power button would start the flashing from leoimg.nbh from your microSD card. In the last case, the update on your computer will stall at 0%, this is just because you're not running the update from your computer, but from your phone. On your computer it will time-out, but the update on your phone will continue!
I hope this works! But you're doing this on your own responsibility ;p
ce3c said:
Hey bud,
I was having the same problem: the flashing didn't want to start by doing a reset+vol.down. I somehow got around this by putting the leoimg.nbh on my mircoSD card, and then started the flashing from my computer by running the .exe that contains the RUU (for ActiveSync flashing). This "magically" triggered the flashing from the mircoSD card (it showed me a screen whether i wanted to update leoimg.nbh). On this screen, pressing vol.down would start the flashing through ActiveSync, and pressing the power button would start the flashing from leoimg.nbh from your microSD card. In the last case, the update on your computer will stall at 0%, this is just because you're not running the update from your computer, but from your phone. On your computer it will time-out, but the update on your phone will continue!
I hope this works! But you're doing this on your own responsibility ;p
Click to expand...
Click to collapse
Hmmm this kinda messed me up.
What EXE file you run on the pc so it triggered update from SD ?
Because it's upossible to connect with activesync and browse to sd without the phone being fully operational (winmo running).
So i would say maby you just got it somehow with key kombination, because it would be impossible to run it the way you say. Or maby i'm wrong.
Could you be more specific about how you exactly run that process?
Thanks for your kind help. Gjizaqin
Well, whatever ROM you want to flash,
when you download this ROM, the .nbh file is packed in a .exe file.
You transfer the .nbh file to your microSD (rename to leoimg.nbh), and you can run the .exe file to flash through ActiveSync.
Because it's upossible to connect with activesync and browse to sd without the phone being fully operational (winmo running).
Click to expand...
Click to collapse
For me it was possible: reset your phone with the volume button down, to get to the tri-color screen. It shows "serial" on it. When you then connect your phone using your USB cable, it should switch to "USB", after which you can run the ActiveSync flashing.
ce3c said:
Well, whatever ROM you want to flash,
when you download this ROM, the .nbh file is packed in a .exe file.
You transfer the .nbh file to your microSD (rename to leoimg.nbh), and you can run the .exe file to flash through ActiveSync.
For me it was possible: reset your phone with the volume button down, to get to the tri-color screen. It shows "serial" on it. When you then connect your phone using your USB cable, it should switch to "USB", after which you can run the ActiveSync flashing.
Click to expand...
Click to collapse
Whell, by doing this procedure your doing normal ROM Update, and it's not doing update from sd card.
Anyways i tried this way too but not successful, its stuck on 8 % and stay's that way for about 3 minutes, than it gives me error 362 on the loader.
Anyways thanks for your help mate.
Anyone with experience can give me advice what to do with this phone?
Thanks in advance.
Gjizaqin
i'm doing task29 too... but it hang when it runs on black screen showing the percentage bar. advise is appreciated. Thanks.
whizzkid_cool said:
i'm doing task29 too... but it hang when it runs on black screen showing the percentage bar. advise is appreciated. Thanks.
Click to expand...
Click to collapse
I guess were on the same boat
gjizaqin said:
I guess were on the same boat
Click to expand...
Click to collapse
I have the same problem, tried all sorts with no luck. Can't get SD card install to work either.
Oh this sounds fun, I can no longer run active syn with my leo, the computer reports that my "usb device is not functioning properly"
I have re downloaded sync, try as I might I cant it back up and running, I wish everyone else the best of luck
This might be just a little bit off topic, but does anybody know how it is possible that some SD cards are good for flashing ROM's and other (mostly the larger) aren't?
Do you also need to copy the folder "program files" from the SD card you've flashed the ROM with to the other SD card, when you'd like to use this for your device?
jordy1990 said:
This might be just a little bit off topic, but does anybody know how it is possible that some SD cards are good for flashing ROM's and other (mostly the larger) aren't?
Do you also need to copy the folder "program files" from the SD card you've flashed the ROM with to the other SD card, when you'd like to use this for your device?
Click to expand...
Click to collapse
There has been reported problems with some 16GBmSD cards when it comes to flashing from them.
The only thing you need on the mSD card is the LEOIMG.nbh file.
dwntoearth said:
Oh this sounds fun, I can no longer run active syn with my leo, the computer reports that my "usb device is not functioning properly"
I have re downloaded sync, try as I might I cant it back up and running, I wish everyone else the best of luck
Click to expand...
Click to collapse
If you boot up your phone to Bootloader mode (but not connected to the computer), the bottom of the screen reads 'Serial'. If you now plug it into the computer, does it change to 'USB'?
Your computer error message is just saying that the computer cannot install a driver to communicate properly with your phone. Since your phone isn't fully loaded into WinMo then your computer isn't going to recognise it as a WinMo device. So don't worry about that message.
feridoun said:
I have the same problem, tried all sorts with no luck. Can't get SD card install to work either.
Click to expand...
Click to collapse
I guess this problem happen to some of the flash addicts! Problem still unsolved...
Hi, my device version is i780BVGK3, i have download some flashing guide, but "hold down ENTER and FUNCTION keys'' doesn't work so mirage detect nothing ...
Also do i need do flash the russian roms and then some eng roms before flashing to wm 6.5 as is in that quide ???
(the function key is probably the black/white key for writing numbers ???)
Btw is there any other way to flash (sd card, other program)
And the official firmware updater also don't work, ask me to press ok to reset device and then .... try again, can't acess device
I really don't want that buggy WM6.0, help
Sekac79 said:
Hi, my device version is i780BVGK3, i have download some flashing guide, but "hold down ENTER and FUNCTION keys'' doesn't work so mirage detect nothing ...
Also do i need do flash the russian roms and then some eng roms before flashing to wm 6.5 as is in that quide ???
(the function key is probably the black/white key for writing numbers ???)
Btw is there any other way to flash (sd card, other program)
And the official firmware updater also don't work, ask me to press ok to reset device and then .... try again, can't acess device
I really don't want that buggy WM6.0, help
Click to expand...
Click to collapse
Question is quite a range to make an right answer.
Try to disable antivirus filrewalls on pc before trying to flash.
Firewall and antivirus disabled, still not working (official updater to wm6.1 - "timeout, try again") ... maybe windows7 problem ???
But the flashing by mirage, power on with pressed ENTER and ALT buttons also does nothing, phone boots normally and mirage doesn't detect
ALT button is that black/white for input numbers ?
I press them down and then power, hold everything together but nothing happens ...
Sekac79 said:
Firewall and antivirus disabled, still not working (official updater to wm6.1 - "timeout, try again") ... maybe windows7 problem ???
But the flashing by mirage, power on with pressed ENTER and ALT buttons also does nothing, phone boots normally and mirage doesn't detect
ALT button is that black/white for input numbers ?
I press them down and then power, hold everything together but nothing happens ...
Click to expand...
Click to collapse
Holding buttons then releasing "power", device going to power up, but keep other buttons pressed till boot screen appears. Yes win 7 is not supported, but you can manage it by some ways. Use XP or Vista.
still cannot acces boot screen, should be phone clean (hard reset) ?
sim and memory card removed, but no effect, phone hang for some time with SAMSUNG on screen, but then boot normally :/
Sekac79 said:
still cannot acces boot screen, should be phone clean (hard reset) ?
sim and memory card removed, but no effect, phone hang for some time with SAMSUNG on screen, but then boot normally :/
Click to expand...
Click to collapse
It must to enter loader mode this way or its not sgh-i780
Try to update via mirage updater on xp computer.http://forum.xda-developers.com/showpost.php?p=8154552&postcount=1117
Ok, the solution was to upgrade to the official wm6.1, after this the boot screen become accessible, before really NOT !
Now i am using your wm 6.5 final and it works (especially the mouse) like a charm, thank you for your advice and really good rom
Btw maybe you should mention somewhere in your flashing guide that if the boot screen is not accessible the official upgrade is required
windows 7 or XP?
Sekac79 said:
Ok, the solution was to upgrade to the official wm6.1, after this the boot screen become accessible, before really NOT !
Now i am using your wm 6.5 final and it works (especially the mouse) like a charm, thank you for your advice and really good rom
Btw maybe you should mention somewhere in your flashing guide that if the boot screen is not accessible the official upgrade is required
Click to expand...
Click to collapse
Hi, congratulation on your successful upgrade to winmo 6.5.
Did you finally able to do the upgrading with a windows 7 PC?
I only have a windows 7 PC, i wonder if i have to borrow an XP machine from a friend to do this.
Thanks..
blumedic said:
Hi, congratulation on your successful upgrade to winmo 6.5.
Did you finally able to do the upgrading with a windows 7 PC?
I only have a windows 7 PC, i wonder if i have to borrow an XP machine from a friend to do this.
Thanks..
Click to expand...
Click to collapse
Here is win7 64(32) bit flashing guide http://forum.xda-developers.com/showthread.php?p=4866182#post4866182
first methode mensioned on this post works very well. Only from myself I should to notice that you should load win7 in "test mode" to install attached drivers.
Personally im on win7 64 bit and using this driver.
I haven't try in win7, official wm6.1 upgrade doesn't work in win7 so i go to my "xp pc friend" and there made complete flashing - wm6.1 from samsung site and wm6.5 through mirage ...
Sekac79 said:
I haven't try in win7, official wm6.1 upgrade doesn't work in win7 so i go to my "xp pc friend" and there made complete flashing - wm6.1 from samsung site and wm6.5 through mirage ...
Click to expand...
Click to collapse
So then this is for you too
Hi everybody,
i'm stuck on WSOD.
I stil can access bootloader, the red,green,blue, white screen.
It displays as follow:
PB81100 HX-BC
SPL-2.0.8.HSPL 8G XE
RIFFBOX 0x05
Any clue on how to get out of this?
Thanks in advance
bump!
is the phone bricked?
No its not bricked.
Download a stock ROM from the HTC support site for your country with your S/N,connect your HD2 while on the bootloader (colored screen) and start flashing the ROM.
I think you can also get the spesific ROM for your device from here at the ROM Development section.
Hi, htc site downloads only the latest rom, i can't find the section where to put a serial number... anyway, i've downloaded the latest one for my country and from the SD it stucks on grey screen "Loading..." from USB it stucks on 0% (black screen with loading bar and no HTC logo)
Do someone knows where the htc site accepts s/n for downloading?
Can you tell what version of HSPL and FW do you have ,and what is your original FW country?
Edit:
http://forum.xda-developers.com/showthread.php?t=623283
In this thread you can find the official stock ROM of your device.
1-download it to your PC.
2-Connect your phone to the computer.
3-Run the Active Sync.
4-Run the Downloaded ROM,I think its RUU,5- read and follow the on screen instructions.
hagba said:
Can you tell what version of HSPL and FW do you have ,and what is your original FW country?
Edit:
http://forum.xda-developers.com/showthread.php?t=623283
In this thread you can find the official stock ROM of your device.
1-download it to your PC.
2-Connect your phone to the computer.
3-Run the Active Sync.
4-Run the Downloaded ROM,I think its RUU,5- read and follow the on screen instructions.
Click to expand...
Click to collapse
I don't have a HSPL right now its a SPL 2.08.0000ii and the country is ITALY.
I've downladed the latest 3.14 rom from italian website and i've attached it by usb and tried to flash, stuck at 0%.
as far as I remember SPL 2,08 is not for the FW version 3.14 its for older ROM.
Ok here is what you have to do:
1-from this thread download and install the HSPL2,you should do this by downloading to your PC and connecting your HD2 to Active Sync,read the thread the information is there.
http://forum.xda-developers.com/showthread.php?t=611433
2-from this thread download one of these Custom ROMs,anyone you like,and install the same way you did the HSPL2 and through the Active Sync.Dont wurry too many ROMs to chose from if you dont like it.
http://forum.xda-developers.com/showthread.php?t=612580
3- Do lot of reading and ask anything that you want an explanation.
4-Wahtever you do dont Flash anything from you phones SD card! just through the computer with Active Syng.
hagba said:
as far as I remember SPL 2,08 is not for the FW version 3.14 its for older ROM.
Ok here is what you have to do:
1-from this thread download and install the HSPL2,you should do this by downloading to your PC and connecting your HD2 to Active Sync,read the thread the information is there.
http://forum.xda-developers.com/showthread.php?t=611433
2-from this thread download one of these Custom ROMs,anyone you like,and install the same way you did the HSPL2 and through the Active Sync.Dont wurry too many ROMs to chose from if you dont like it.
http://forum.xda-developers.com/showthread.php?t=612580
3- Do lot of reading and ask anything that you want an explanation.
4-Wahtever you do dont Flash anything from you phones SD card! just through the computer with Active Syng.
Click to expand...
Click to collapse
As for the point 2: how can i connect it to active sync if it does not boot?
i've tried all options of HSPL and it won't flash anything, any version 1.66, 2.08 or 3.03.
If you are on tri color screen the pc and Active Sync must be able to recognize it.
however if you cannot Flash the HSPL your only hope is that you Flash a stock official ROM of your Devices original country and to do that you must know the exact region for your FW.
Same also happened to me once,I discovered that my HD2 FW country was South East Asia !! so after downloading and flashin it evrything started working once again.
Anyway if it didnk work,just go to the below link and ask help there from a guy called Anthony,register or use you facebook account for faster reply,he ussualy hangs around there and is always willing to help.
http://www.gsmarena.com/htc_hd2-reviews-2957.php
hagba said:
If you are on tri color screen the pc and Active Sync must be able to recognize it.
however if you cannot Flash the HSPL your only hope is that you Flash a stock official ROM of your Devices original country and to do that you must know the exact region for your FW.
Same also happened to me once,I discovered that my HD2 FW country was South East Asia !! so after downloading and flashin it evrything started working once again.
Anyway if it didnk work,just go to the below link and ask help there from a guy called Anthony,register or use you facebook account for faster reply,he ussualy hangs around there and is always willing to help.
http://www.gsmarena.com/htc_hd2-reviews-2957.php
Click to expand...
Click to collapse
i'm on tri color screen, the pc recognizes it and the "serial" changes to "usb" but activesync says its not connected for sync.
i've tried to flash any stock italian rom from 1.43 to latest 3.14 and always stuck at 0%, only sometimes at 1% then reboot...
May be you should try reinstall your Windows mobile Center,look for updates,it looks more like a PC software problem than a phone,did you try a different computer?
hagba said:
May be you should try reinstall your Windows mobile Center,look for updates,it looks more like a PC software problem than a phone,did you try a different computer?
Click to expand...
Click to collapse
i've tried 3 pcs, 1 with windows 7 and two with windows XP, same results...
Can't flash radio
Hi there,
After some different succesfull android installations I decided to do a task29. After that I couldn't flash the radio. Even with SD-method (renaming nbh-file on SD-card) I kept a white screen with HTC-logo, no RDG info on the buttom of my screen.
Then I flashed a stock winmo rom, succesfully. However, I want to go back to android. First think of checking some roms on SD. They all seem to get stuck on booting (or what ever). No progress, even after maybe 30 / 40 minutes. This is not normal, right?
I am reluctant to flashing any other stuff, scared of bricking my phone.
Can any one give me good advise? Like how I can get SD-roms to work for starters.
Thanks,
Mike
hagba said:
May be you should try reinstall your Windows mobile Center,look for updates,it looks more like a PC software problem than a phone,did you try a different computer?
Click to expand...
Click to collapse
A repair centre has done a JTAG without success (or they say so).
is it possibile even JTAG fails?
Ive opened this thread coz many people are finding my tutorial usefull
so here goes and if it helps let me know and give me a thanks
Hi i was new to all this and installed dynamics v2.0 fully unlocked rom the other day and this is how i went about it
download this
RUU_Mozart_Orange_UK_1.24.061.35_Radio_5.50.09.18_22.24.50.09U
http://www8.zippyshare.com/v/48117282/file.html
this is a load your phone back to 1.24
to install it i did this
turn phone off hold down volume down and turn phone on you should go to the bootloader screen then plug in your usb cable to the pc,
then on the white line at the bottom on phone screen should say usb instead of serial but maybe it will need to install some drivers cant remember 100%
when it is ready open that file and click the RomUpdateUtility.exe and follow the steps in that then you will have your phone back to 1.24
next you can follow this post here and download the attachment at the bottom named DFT_XSPL_WP7FG1.rar this what u need for this step
http://forum.xda-developers.com/showthread.php?t=1195647
basically this is the install procedure u may need to install active sync (XP) or windows mobile device center (vista and 7) but i did not have to my phone automatically did this
DFT_RSPL_WP7FG1_LAUNCH allows you to load RSPL on the device:
1. Extract ALL files from RAR archive.
2. Run DFT_RSPL_WP7FG1_LAUNCH (with administrative rights to access USB)
3. Mindfully reads information text. Press “Next” button.
4. Reset your device and hold “Volume Down” button during reset to enter OSPL mode.
5. Connect your device to PC via USB cable.
6. Now you may need to install proper USB drivers. They come with Active Sync / Windows Mobile Device Center.
7. Install drivers if required.
8. Make sure device show “USB” at the bottom instead of “Serial”.
9. Press “Next” button in the wizard. It should detect your phone.
10. If you are using WCEUSBHS driver under Windows Vista/7 (for MTTY or MAGLDR TTY for example), you should apply “Windows XP compatible mode” in the properties of EXE file to get connection.
11. After successful connection it should show device codename and allows to choose installed OSPL version.
12. You should look at the screen and select OSPL version in drop down list box. You need do this because it’s not possible to detect installed version via USB.
If your current SPL version doesn't present in the list, you can choose nearest version,
BUT ONLY IF IT HAS SAME FIRST NUMBER!!
Example: You have 4.XX on the device. Do NOT choose 1.XX 2.XX 3.XX.
13. Press “Next”. Wait until comes final page.
14. Read and close window
15. Look at the device – it must reboot to RSPL.
16. If you see RSPLX.Y.Z and “CotullaRSPL” on the screen – the task done! Otherwise, please report in this thread about your problems.
17. Put some feedback in this thread for community and developers.
Installing HSPL
DFT_HSPL_WP7FG1_INSTALL allows you to install HSPL on the device:
1. Launch RSPL on the device like described above.
2. Be sure that you close RSPL wizard window.
3. Run DFT_HSPL_WP7FG1_INSTALL.exe (with administrative rights to access USB)
4. Mindfully reads information text. Press “Next” button.
5. Proper drivers already must be installed in RSPL step.
6. Press “Next” button in the wizard. It should detect your phone.
7. If you are using WCEUSBHS driver under Windows Vista/7 (for MTTY or MAGLDR TTY for example), you should apply “Windows XP compatible mode” in the properties of EXE file to get connection.
8. After successful connection it should show device codename and allows to choose HSPL or OSPL version to install. OSPL means you install stock SPL back.
9. Check device codename, if something wrong turn off computer and run to the nearest forest. Grab some water with yourself.
10. Press “Next”. Wait until comes final page.
11. Device will reboot and start to boot OS.
12. Reset it and enter SPL mode again. Be sure there HSPLX.Y.Z and “CotullaHSPL” appear.
13. Put some feedback in this thread for community and developers.
Now u are ready
you can find what custom rom you want i used dynamics v2.0 which can be found here and its fully unlocked aswell so all i all im pleased with it
http://forum.xda-developers.com/showthread.php?t=1520352
download it and install the same way we installed the 1.24 rom in the begining of this post
turn phone off hold down volume down and turn phone on you should go to the bootloader screen then plug in your usb cable to the pc,
then on the white line at the bottom on phone screen should say usb instead of serial
when it is ready open that file and click the RomUpdateUtility.exe and follow the steps in that and then you will have loaded your desired custom rom onto your phone
I hope this helps some of u out and happy modding
best regards
steve
1.24
Great guide thanks, my phone is network unlocked do you know if that will revert once upgraded? also you mention rolling back to 1.24 what does 1.24 mean,and how do i find out if my device is on 1.24 already? one last Question how are you finding the rom any issues with it?
cheers
Geoff
geofferz said:
Great guide thanks, my phone is network unlocked do you know if that will revert once upgraded? also you mention rolling back to 1.24 what does 1.24 mean,and how do i find out if my device is on 1.24 already? one last Question how are you finding the rom any issues with it?
cheers
Geoff
Click to expand...
Click to collapse
1.24 im refering to the SPL you can find your version by turning the phone off holding volume down and power button and u will see your SPL at the top,
im not sure about the unlocked sim/network im new to all this aswell maybe do a search on the forums and see if you can find the answer, but i dont know this 1 sorry :/
rom is good no issues had a cable issue yesterday that wouldnt let me charge my phone but thats down to my dodgy cable
you dont have to install this rom you can use any custom rom you like or might find out there
anyways hope this helps
Launch RSPL
Thanks a great help.. ok to use to add tunes via zune? last bit on installing the custom Rom, what ruu option do I choose?
Cheers
hehe the first stage 1.2 spl.. when I open the rom update it gives a error 208? the update utility cannot open the requested file? any ideas and do i have to down to 1.2?
edit..Windows Mobile Device has been installed but when I open it, its not connected!! I powered of the phone with volume down. I can see the spl and usb at the bottom and it installed usb drivers etc, Im I missing a driver?
thanks once again
geofferz said:
hehe the first stage 1.2 spl.. when I open the rom update it gives a error 208? the update utility cannot open the requested file? any ideas and do i have to down to 1.2?
edit..Windows Mobile Device has been installed but when I open it, its not connected!! I powered of the phone with volume down. I can see the spl and usb at the bottom and it installed usb drivers etc, Im I missing a driver?
thanks once again
Click to expand...
Click to collapse
hi u don't need to worry about mobile device center this never picked up my phone either until I installed the custom rom
Don't ask why I've no idea
So what's happening when you press volume down and power you are seeing the multicolored bootloader screen right?
If so I don't know why the rom won't install for you
Maybe I've heard your firmware is at .707 if so you need y cables and its harder to downgrade your sol
tell me the firmware version please and ill try help u its in settings then about then advance on your phone if I remember
Oh also do not extract the 1.24 from the .rar file run everything from there
This is why ur getting that error I think
geofferz said:
Thanks a great help.. ok to use to add tunes via zune? last bit on installing the custom Rom, what ruu option do I choose?
Cheers
Click to expand...
Click to collapse
you dont need to select a option just load ROMUpdateUtility.exe
ive just downlaoded and reinstalled the rom myself to try see what u mean and i dont get this option
when you go to bootloader screen on your phone and it says usb open the rom file and click ROMUpdateUtility.exe
now dont open active sync or mobile tools as it says on the program information
just click the tick boxes and continue through the process
maybe try download the rom again found this
ERROR [208] : FILE OPEN
ERROR [210] : FILE READ
These error messages indicate that RUU lacks certain important files and cannot continue with the update. Please get the complete RUU package again.
but like i sed i have downloaded the file myself and it is working for me without any problems
beany2009 said:
hi u don't need to worry about mobile device center this never picked up my phone either until I installed the custom rom
Don't ask why I've no idea
So what's happening when you press volume down and power you are seeing the multicolored bootloader screen right?
If so I don't know why the rom won't install for you
Maybe I've heard your firmware is at .707 if so you need y cables and its harder to downgrade your sol
tell me the firmware version please and ill try help u its in settings then about then advance on your phone if I remember
Click to expand...
Click to collapse
Thanks for the help.
My firmware is 2250.21.40600.61,hope I don't need y cables for this version..
I see the multi coloured screen, and once plugged in to my pc it says usb at the bottom..
Strangely the 1.24 rom update works sometimes and not others, can you remember when you do done it, did it tell you want version currently on? because it didn't for me, I pressed next until update screen and was on 0% for bout 6-7 mins, my phone also displayed the same, how long did it take roughly
As regards to the Dynamics rom update.exe ( I opened with no phone attached ) It says welcome to the advanced rom update utility for Htc Mozart below that are, two ruu options.. regular (this is default) and below is custom I was thinking or using logic that I don't think i have hehe.. that the custom would be the option? or leave it
I really appreciate your help on this, I have installed many custom rom on android,but this windows phone grr annoying but I wont give up.
geofferz said:
Thanks for the help.
My firmware is 2250.21.40600.61,hope I don't need y cables for this version..
I see the multi coloured screen, and once plugged in to my pc it says usb at the bottom..
Strangely the 1.24 rom update works sometimes and not others, can you remember when you do done it, did it tell you want version currently on? because it didn't for me, I pressed next until update screen and was on 0% for bout 6-7 mins, my phone also displayed the same, how long did it take roughly
As regards to the Dynamics rom update.exe ( I opened with no phone attached ) It says welcome to the advanced rom update utility for Htc Mozart below that are, two ruu options.. regular (this is default) and below is custom I was thinking or using logic that I don't think i have hehe.. that the custom would be the option? or leave it
I really appreciate your help on this, I have installed many custom rom on android,but this windows phone grr annoying but I wont give up.
Click to expand...
Click to collapse
lol np mate ill try help as best i can
right i understand your bit now about the dynamics rom u need to select regular on this part
custom i think would be if u want to edit it or some **** but i have no idea so u use regular mate because this is the actual rom file made but remember u must downgrade and load rspl and hspl onto your phone before doing this step
right my firmware is 2250.21.51301.401 but i dont know if this changes on installation of the downgrade and adding the custom rom like i sed im a complete noob with this myself but all went smoothly for me thats why i made the tutorial
and no mate my phone took about 5-10 mins to install the 1.24 orange rom
have u tried a hard reset first and then see if it helps with the installation
ill search around for your firmware and see if there has been issues
edit..........................................
did a search on the forums and your firmware comes up with nothing :/ did a google and only shows this thread did you type the numbers correctly?
also you mean that the rom update works sometimes and not others?
if it works once it should install it mate np's
When you load you phone into bootloader the multicoloured screen can you please type here what u see mainly the top letters and numbers
beany2009 said:
When you load you phone into bootloader the multicoloured screen can you please type here what u see mainly the top letters and numbers
Click to expand...
Click to collapse
again thanks for your help
ok here goes red: PD 67100 ss-BC (4k)
SPL-4.6.2250.0(129193) mng
what you think?
i think my SPL was on that before so i dont know why u are having issues mate :/
maybe wait and see if a developer can read this and give us some info on why its not working for you :/
Thanx For The Help And the Tutorial It Was very Helpfull
Now my phone Is running dynamic 2.0
hey can u tell me what other custom roms are available that i can install on my phone and if there are any different methods of installing them
no problem mate glad it helped
erm the only other custom rom i have seen on mozart is deepdishing v7.0 you can find this in the development thread inside mozart topics
and for me mate im not sure and have not seen another way of installing another custom rom but im new to all this myself
anyway glad this helpped
regards
my computer wont pick up htc 7 mozart in bootloader
can anyone help me its doing my head in .
when you connect your phone to pc in bootloader its not showing as usb on the bottom of bootloader screen?
just serial?
just to confirm. this wont work on Asian handsets.
beany2009 said:
Ive opened this thread coz many people are finding my tutorial usefull
so here goes and if it helps let me know and give me a thanks
steve
Click to expand...
Click to collapse
Thx for the easy to follow guide.
It worked on a telstra brand mozart using windows 8.
Sent from my GT-N7105 using Tapatalk 2
As title states trying to go back to stock but activesync not recognising my phone I have tried everything but nothing working. Since installing wp7.8 rom it doesn't get recognised and I do not know what else to do so any help would be greatly appreciated. Thanks
Well ...
david.wilson.1987 said:
As title states trying to go back to stock but activesync not recognising my phone I have tried everything but nothing working. Since installing wp7.8 rom it doesn't get recognised and I do not know what else to do so any help would be greatly appreciated. Thanks
Click to expand...
Click to collapse
Dear friend ... Would you please give more info ? ( if you had WPH 7.8 , you have HSPL which means you could have flashed WM in Bootloader so why didn't you flash the ROM there ? ) ... Thanks in advance
With Best Wishes
Hitman1376
hitman1376 said:
Dear friend ... Would you please give more info ? ( if you had WPH 7.8 , you have HSPL which means you could have flashed WM in Bootloader so why didn't you flash the ROM there ? ) ... Thanks in advance
With Best Wishes
Hitman1376
Click to expand...
Click to collapse
Yes I have hspl. I have tried everything, I hav magldr 1.12 so I cnt flas from sd, when I try n use usb flasher the updater can't find my device it has error code 262 which is activsync not recognising the device so I cannot think of another way to flash the rom. Im goin to try and use someone else computer incase its mine but until then trying to findanother method of doing it
??? ... but you can't flash WM on MAGLDR !!!!
david.wilson.1987 said:
Yes I have hspl. I have tried everything, I hav magldr 1.12 so I cnt flas from sd, when I try n use usb flasher the updater can't find my device it has error code 262 which is activsync not recognising the device so I cannot think of another way to flash the rom. Im goin to try and use someone else computer incase its mine but until then trying to findanother method of doing it
Click to expand...
Click to collapse
But remember that you can't flash WM using Magldr !!!!!!!!! .... well if now you have WM stock and you want to return to it , you should go to bootloader menu ( shut down and then hold "Vol Down + Power button" to get to the colorful menu then run Task29 than Run the WM installation ( NOTE : Remember that all bootloaders are flashed this way and if you flash the WM , your Magldr is ging to get removed !!! also remember that doing a Task29 is necessary to remove the bootloader you had before and if you don't do it , your installed bootloader will crush !!! ) .. Goodluck
With Best Wishes
Hitman1376
hitman1376 said:
But remember that you can't flash WM using Magldr !!!!!!!!! .... well if now you have WM stock and you want to return to it , you should go to bootloader menu ( shut down and then hold "Vol Down + Power button" to get to the colorful menu then run Task29 than Run the WM installation ( NOTE : Remember that all bootloaders are flashed this way and if you flash the WM , your Magldr is ging to get removed !!! also remember that doing a Task29 is necessary to remove the bootloader you had before and if you don't do it , your installed bootloader will crush !!! ) .. Goodluck
With Best Wishes
Hitman1376
Click to expand...
Click to collapse
What is task 29? If that is the stock rom then yes I have that I have also tried all of that on the 3 colour screen but it just doesnt do anything its recognising the usb on the coloured screen but when I start the process nothing actually happens it gets stuck at 0%
Well ...
david.wilson.1987 said:
What is task 29? If that is the stock rom then yes I have that I have also tried all of that on the 3 colour screen but it just doesnt do anything its recognising the usb on the coloured screen but when I start the process nothing actually happens it gets stuck at 0%
Click to expand...
Click to collapse
Task29 is a flash able image which erases the data on the phone and makes it ready for flashing a new Bootloader (WM / MAGLDR / CLK ) ... That may be the 0% reason .... try doing a Task 29 ... I recommend you to try this App ( it has MAGLDR + CLK + Task29 ) ... Good luck
With Best Wishes
Hitman1376
eretrs that
hitman1376 said:
Task29 is a flash able image which erases the data on the phone and makes it ready for flashing a new Bootloader (WM / MAGLDR / CLK ) ... That may be the 0% reason .... try doing a Task 29 ... I recommend you to try this App ( it has MAGLDR + CLK + Task29 ) ... Good luck
With Best Wishes
Hitman1376
Click to expand...
Click to collapse
Hey thanks but I have just spent ages downloading and setting up that software to eventually get to video tutorial where I am then told that you still need activesync. As stated earlier my activesync is not working my phone is not being recognised on activesync and that is where my problem lies so please if you can help with that then good. Cause otherwise im wasting my time
I would reinstall activesync, turn off any antivirus software, especially if Norton.
Remove SD card, put device into bootloader manually *shut down and then hold "Vol Down + Power button* then connect to usb cable & try flashing standard wm6.5 rom.
Activesync download & general tips & tools can all be found in HD2 Wiki.
http://forum.xda-developers.com/wiki/HTC_HD2
Mister B said:
I would reinstall activesync, turn off any antivirus software, especially if Norton.
Remove SD card, put device into bootloader manually *shut down and then hold "Vol Down + Power button* then connect to usb cable & try flashing standard wm6.5 rom.
Activesync download & general tips & tools can all be found in HD2 Wiki.
http://forum.xda-developers.com/wiki/HTC_HD2
Click to expand...
Click to collapse
I have done the uninstall and install of activesync but I haven't tried removing sd card so will try that again.if it doesn't work I will then try a newer computer and see if I can get it working through wmc instead.
I have tried everything that has been suggested. Task 29 also isnt working as it requires activesync dies not recognise device.
Thanks for trying to help everyone. I managed to sort it and it was the hspl had messed up I have sorted it amd now thats me in android so goodbye windows phone lol