Hi all,
As per subject...
Anyone know if such as cable is available?
I was planning on getting the new 3-1 Adaptor for the TYTN to make use of the 3.5mm jack and charging feature in my car.
The thing is, the cable for this adaptor is very short and cannot be hidden easily when in the car. So, I was thinking of using an extension cable of some sort, so the adaptor could be more easily hidden elsewhere under the centre console.
Many thanks.
USB Stupidity
Hi,
Affraid i didn't find anything either, and wanted to do the same thing.
I resorted to buying the cable from expansis and "Adapting it my self"
The project was fairly simple, and if your happy with a soldering iron and a multimeter you should be fine.
I now have a small connector on my dash that will disapears under the dashboard to a breakout box. All i basicly did was chop off the box that has the two female connectors in it, extend the wire with an old cut up parralel printer cable (multicore and was lying arround) and then terminated in a project box from maplins.
This has two headphone sockets, (audio out stero, and mic in) as well as a USB socket to charge the phone. (the plan was to have the USB socket be usable for data... but that bit went a bit wrong...
Still from the testing i have done, i now have tomtom and WindowsMedia mp3 play back comming through my car stero, and my VarioII reports to be charging. Havn't had a chance to test it on a long drive yet, i think i might still need a beefier 12Volt to USB adapter.
If anyone want more info on what i did, i'd be glad to help.
here are some pics, sorry v bad Q....
I don't seem to see any pics?...
Ooops...
here you go
Seems good to me- as long as it all works ok then its a good job.
Always been interesting in making my own adapters/cables but have never tried. Perhaps I should give it a go!
sh500 said:
Hi all,
As per subject...
Anyone know if such as cable is available?
I was planning on getting the new 3-1 Adaptor for the TYTN to make use of the 3.5mm jack and charging feature in my car.
The thing is, the cable for this adaptor is very short and cannot be hidden easily when in the car. So, I was thinking of using an extension cable of some sort, so the adaptor could be more easily hidden elsewhere under the centre console.
Many thanks.
Click to expand...
Click to collapse
Any news on that extension cable yet; is it available?
i brought one of these and successfully lengthened it with an old peice of printer cable (only multi core cable i had to hand)
i then used an off the shelf diy project box to hide the junction in.
worked very well, but i have since changed to a bluetooth car kit.
the soldering was a little small and working out which wire was which was a bit of a pain, but all in all only took an hour or so to sort out. probably worth it.
(AFAIK my dad is still using the one i adapted.)
sorry to put old post on top !! but own a dimaond and just buy a touch HD !
i a m looking for this kind of cable !!
If someone have info !!
where to buy for exemple ?
thanks in advance !!
how about extending the power cable? seems like that would be easier.
3in1 11 PIN ExtUSB Earphone Handsfree Adapter for HTC
Other option: http://cgi.ebay.com/3in1-11-PIN-Ext...AU_MobilePhoneAccessories&hash=item3cabfd9d0b
Related
Hello,
I just noticed there are many Mini-USB to 3.5 (or 2.5) audio adapters on sale at e-Bay, like this.
All of them seem to be for Motorola phones, though. Anyone has tried on the TyTN?
I seem to remember reading somewhere in GENERAL that they would not. Someone asked HTC and they said it was propietry - but they would have an adapter out soon(ish).
Rich
I can't see why it shouldn't work... it's just £5 so what's the loss if it doesn't...
EDIT: I've bought one today. I'll tell if it works or not....
The port is NOT proprietary. It is a standard mini-USB, and takes standard mini-USB cables.
They tweaked the socket a little bit to go along with their new proprietary headset.
In other words, you can plug in any standard mini-usb cable/accessory, but you can't plug the headset into any standard mini-usb port.
Sorta "dain-bramaged" if you ask me, but since I use a bluetooth headset, it's a non-issue.
Charge and audio simulataneously?
So, how do I both charge the unit and listen to music (wired headphones) at the same time? Does anyone know?
There is an alternative to an adapter. As they say on Blue Peter, here's one I made earlier.......
http://www.4winmobile.com/tutorial-replace-hermes-headset-connector-with-35mm-socket-vt3146.html
I asked htc for an adapter
here ist the answer:
Dear Sir
At present HTC does not manufacture, supply or support such a connection and HTC cannot supply such a diagram.
Click to expand...
Click to collapse
Re: Charge and audio simulataneously?
Manne said:
So, how do I both charge the unit and listen to music (wired headphones) at the same time? Does anyone know?
Click to expand...
Click to collapse
Easy answer: get an iPod! :lol:
Hello,
I tried one of those "motorola / razr" headphone adapters on sale at ebay. while the adapter fits nicely it doesn't work. Tytn just doesn't seem to recognize it.
Any thoughts of why it doesn't work and alternatives greatly appreciated.
Hello,
I tried one of those "motorola / razr" headphone adapters on sale at ebay. while the adapter fits nicely it doesn't work. Tytn just doesn't seem to recognize it.
Any thoughts of why it doesn't work and alternatives greatly appreciated.
I seem to remember reading somewhere in GENERAL that they would not. Someone asked HTC and they said it was propietry
Click to expand...
Click to collapse
If you look at the connector the motorola one has 5 pins across the top of the it. If you look at the Tytn on it has 5 pins across the top and 6 across the bottom. In order to be compatible with current chargers the top 5 pins supply the charging and the bottom 6 supply headset and serial connections.
I do not intend to use the "Line out" function of my TyTN often but it DOES lack an audio output. Sometimes I need to connect the device to speakers and etc.
It should be a modified mini USB port that the TyTN has and that must have saved some space over traditional 2.5mm sockets. We all know 2.5 sockets are not common and you need an apaptor to change it to 3.5mm anyway so prolly HTC gave up on the 2.5 and made the USB standard.
I am pretty sure that some accessory will come out.
Does anyone know if the Ebay adaptor cable will work on the TyTN?
Most of the ebay adapters are standard usb mini for use with the razor etc. These will not work. It needs to be an adapter specifically for the Tytn.
thanks! It is really stupid for HTC not to launch any accessories for the TyTN(or other releases).
Like the Atom Exec has factory cradle kit, battery, silicon cases, leather straps and etc. I don't even know where to get an extra battery!
Thought of one of these:
http://www.audiocubes.com/product_info.php?products_id=1736
zakeen said:
Thought of one of these:
http://www.audiocubes.com/product_info.php?products_id=1736
Click to expand...
Click to collapse
has anyone tested it?
is it working with tytn ?
for a hundred something i can get a pair of entry level high end SHURE headphones or even one with the mic.. all I need is a 2.5 Plug.
for a hundred something i can get a pair of entry level high end SHURE headphones or even one with the mic.. all I need is a 2.5 Plug.
http://cgi.ebay.com/Stereo-Audio-Ad...58QQihZ007QQcategoryZ3311QQrdZ1QQcmdZViewItem
Anyone used these yet?
Here's a good one for ya, I need to replace the 11 pin connector on my Hermes, I already have a replacement jack thats the standard 5 pin mini usb, I know it won't be fully functional, i just want the darn thing to charge and i know the standard will do that as well as sync w/ a computer. Now my problem is, theres the 11 pads to solder onto on the board, but i don't know which is what. So, if one of you techies knows the answer, GREAT! if no one knows it, if you could by chance just take a photo at about 45 degree angle looking at the back of the usb jack, that would be AWESOME! I've looked through the wiki and cant find any pics of the angle i need.... Thanks for your help guys!!
Michael Brown
Usb conenctor
I think you already know this web page but:
htc-usb-pinout
I houpe it would be heplful.
Ah, I was looking to buy one cause mine is broke. If you know where I can buy it I would be very thanfull.
see ya
Could you guys help me too, i believe any of the pins o USB jack of my JASJAM broke, the phone still charges, but it doesnot help me to get connected with computer or data transfer..
did you check out the link ?
yeap i guess one of the DATA either + or - pin is short. Can we check it with Voltmeter instead of opening the whole device?
replacement for the USB connetor
Hello together,
has anyone an idea were to buy the 11pin usb connector which is inside the Hermes?
Greetings Pudl
11 pin socket!
htc do a little adapter that allows charging and a wired headset to be used at once isn't this the answer to all your problems?
1: remove 11 pin socket and solder into your fone! could be the same as the one in your fone!
2: wire it into your stereo and attatch 5 volts to charge it in the car
job done?
i removed the plastic from the plug and fitted it in place of the mini usb plug in my brodit active holder and can charge and use my wired headset at the same time if i need to
i also cut the plastic off a headset and added wires so i could charge and listen at the same time, i removed the headphone speakers and fitted a 3.5mm socket which allows me to plug it into anything with a line in socket. i can even use it as a speakerfone as i fitted the socket after the microphone!!!
professormark said:
htc do a little adapter that allows charging and a wired headset to be used at once isn't this the answer to all your problems?
1: remove 11 pin socket and solder into your fone! could be the same as the one in your fone!
2: wire it into your stereo and attatch 5 volts to charge it in the car
job done?
i removed the plastic from the plug and fitted it in place of the mini usb plug in my brodit active holder and can charge and use my wired headset at the same time if i need to
i also cut the plastic off a headset and added wires so i could charge and listen at the same time, i removed the headphone speakers and fitted a 3.5mm socket which allows me to plug it into anything with a line in socket. i can even use it as a speakerfone as i fitted the socket after the microphone!!!
Click to expand...
Click to collapse
Sounds interesting... Do you have pictures of this monster creation???
Hey guys, i am hoping i missed something really stupid.
But i just bought a few accessories for my TP2.
I bought an extra charger, and an extra USB connection for my Cradle, and an official HTC car charger
All marked as being for the TP2
But they have a standard Mini-USB connection on them, not the wierd little cut off corner connection that is on the underside of my TP2
wht the hell have i forgotten?
is there an adapter i need to buy or summin?
I am thoroughly confused
Thanks for any help
TM411
No they will work fine, for Data and Power transfer normasl mini-usb cables work fine, you only need the EXT-USB connector (the cut off one) for video and sound transfer (headphones etc.)
Excellent,
Thankyou very much
It' s kind of strange, isn't it. But all mini usb connectors will fit.
I am looking for a permanent car charger cable to install into my car.
It needs to be a 15' to 20' long with a straight cord for a hidden cable run.
I would like to hook it up to the cars wiring under the dash, run it under the windshield pillar trim to between the headliner and roof then drop out above the rear view mirror. I would then plug it into my car dock this just makes a cleaner look.
I have searched around the net but no luck yet.
Any help would be appreciated.
I haven't seen that, but what you may need to do this this. I did something like it a few years ago with a radar detector
get this or something like it
http://cgi.ebay.com/Belkin-Mini-Uni...Accessories&hash=item3a66d9f61b#ht_643wt_1396
and then a usb cord for the length you want, and attach the power and ground to the cig lighter adapter you can take it apart if you need just make sure you get the + and - right and leave the fuse in there. then tape it up nice with electrical tape and wire it in to the fuse panel to turn on with the ignition. its really not as getto as it sounds.
i just use that adapter and plug it in my back seat lighter and run the cord up by the front seat
I Would just use a cigarette lighter adapter: http://www.monoprice.com/products/p...082602&p_id=6765&seq=1&format=3#specification
hidden under the dash, and then plug in one of these:http://www.monoprice.com/products/p...=10303&cs_id=1030307&p_id=5138&seq=1&format=2
Everything you need to put a 12v cigarette lighter socket under the dash is available at an auto-parts store for <$10.
Why don't you just connect to the wiring that is connecting to the cigarette lighter adapter?
That way it would be 5V, and then you can connect that to a project box, and install a fuse in there, and then put the wiring from that to the usb cable.
I did this about 10 years ago, when I directly connected the radar detector, and lights under the seats controlled by buttons. Was fairly easy to do, depending on how much room you have to work with connecting the wiring.
nejohnson said:
I Would just use a cigarette lighter adapter: http://www.monoprice.com/products/p...082602&p_id=6765&seq=1&format=3#specification
hidden under the dash, and then plug in one of these:http://www.monoprice.com/products/p...=10303&cs_id=1030307&p_id=5138&seq=1&format=2
Everything you need to put a 12v cigarette lighter socket under the dash is available at an auto-parts store for <$10.
Click to expand...
Click to collapse
Thank you very much this is close enough to what I was looking for, I will make it work!
KMac Tilt said:
Thank you very much this is close enough to what I was looking for, I will make it work!
Click to expand...
Click to collapse
buy a 12v socket too, get something like this, should be cheap on ebay, then just snip off the male end and stripe the cable so you can tap your car's 12v socket wiring
http://www.google.com/products/cata...sa=X&ei=9Xg6ToTpGeuksQLKluEk&ved=0CI8BEPMCMAc
Just as an FYI, as I see what you are going to do and it is a far better alternative.
A 10'+ cable will not give you full charging voltage at the end of that run. The cable is too long for the small amount of voltage running through it. While it WILL still charge, it will be at a fairly slower rate.
There is a thread in the EVO forums where I was asking cause it was something I noticed and someone who seemed to know what they were talking about when it came to electricity, replied.
I would link it, but been up all night and am getting tired.
Lord Delmar said:
Just as an FYI, as I see what you are going to do and it is a far better alternative.
A 10'+ cable will not give you full charging voltage at the end of that run. The cable is too long for the small amount of voltage running through it. While it WILL still charge, it will be at a fairly slower rate.
There is a thread in the EVO forums where I was asking cause it was something I noticed and someone who seemed to know what they were talking about when it came to electricity, replied.
I would link it, but been up all night and am getting tired.
Click to expand...
Click to collapse
as far as I know USB cable can go up to 5m or about 16ft, this length has more to do with data transmission signal quality issue, for straight charging there's no signal at all, so shouldn't be a problem. When you get a chance please post your link, so i can study this some more
went google found this...
http://www.otdl.com/VDROOP.PDF
Here is the thread...
http://forum.xda-developers.com/showthread.php?t=844055
Here is my post within that thread, its post 23, but my question is answered around 25.
http://forum.xda-developers.com/showpost.php?p=9402352&postcount=23
Have you checked with 12 Volt Designs, they offer a couple of options that may work for you.
I would post a link, but I am still new to this forum
This is such a good idea!
Sent from my PG86100 using xda premium
Get a 2amp 2 usb car lighter charger from Amazon and 15 or 20' micro usb cable from monoprice.com... Exactly my setup with a exo gear Exomount for my evo to windshield mount.
Sent from my HTC Evo 3D
I got tired of multiple cigarette lighter adapters a while back. I bought a 5A 12V to 5V converter on eBay, and wired it to switched power. It powers my phone, GPS, and Bluetooth audio gateway all from the one little box.
Trying to find out if there is such a thing as going from extmicro usb that the evo and flyer have to a usb type A (or any other normal usb).
Need a right angle to plug into tablet for car install and found that I can fit a microb angled cable into the tablet, but now need to take the car charges extusb and get an adapter to hook it all together.
You can just buy a regular micro USB extended cable. It fits in the flyer/view charge port.
Proprietary cable is the one on the right. Regular micro USB on left.
I am installing the tablet in dash of a car.
I have the oem car charger because its only one with right voltage. But I need a angled usb for clearance issues. So im trying to figure a way to go from the charger EXTMICRO usb to the angled usb.
Searched around and have come up completely empty.
I'm working on the same project and found this thread searching (again) for more info on extusb. The solution I came up with for getting enough clearance to use the port requires disassembly and if you plan on keeping the warranty, it's probably not a good option for you.
Anyway, my solution was to make some small right-angle brackets for the pcb that contains the extusb port. It requires material for the angle brackets and two small screws with nuts. See attached for a better idea.
I actually got the tablet installed and fairly well, but have since removed it to come up with better designs for charging, access to the power button (and possibly volume buttons) for recovery actions, turning the screen on/off with ignition, and potentially microphone relocation.
You may want to check out http://www.dealextreme.com/ for right-angle and other adapters if you don't want to open up the tablet.
PS: Protect that screen. The plastic is very soft and will easily scratch.
I don't follow.
I thought the HTC car charger was a plug with a USB port in it just like all the others. I thought this might help, but I probably have no idea what you're really looking for
http://www.amazon.com/Cables-Go-Right-Angled-Micro/dp/B005EV2LAM
If you *need* to use the 12pin micro usb that the view has (which from my understanding was only there for the docking station utility), then you might be out of luck unless you can build something yourself.
Im looking for a cable like you linked to, but then I need a way to connect the flyers car charger special usb tip into it. Only way I can think of is to carefully grind the corners so that it will fit into a micro B female connection.
But the chargers are not cheap and if I F*** it up Im out $30
On a kia soul forum where others are planning on doing the same install with the flyer, one guy has come accross a company that makes custom cables. He said that if We send the car charger to them they will replace the usb tip with a micro B 90 degree angle for $25.
So A person is sending the charger to them to have it done and is going to let us know how it comes out.
jacobbones, can you provide a link to the kia soul flyer thread?
Yes, here it is.
http://www.soulhamsters.com/forum/i...ale-again-24feb-7-android-tablet-199-shipped/
Talk about the custom job is near the end of the posts
opening up the car charger and replacing the cable is incredibly simple. I have done it so many times, I can probably do it blindfolded. I actually had to go and replace the OEM chargers cable with the USB cable that it came with because my damn dog chewed threw the charger cable. Didn't come back very pretty, but it works, that charger has got the be the best charger built I have ever seen, incredibly difficult to open, but I'm sure the car charger is a lot easier to open, you just need a soldering gun and it should be easy.
Sent from my ADR6425LVW using xda premium