Hey guys, i am hoping i missed something really stupid.
But i just bought a few accessories for my TP2.
I bought an extra charger, and an extra USB connection for my Cradle, and an official HTC car charger
All marked as being for the TP2
But they have a standard Mini-USB connection on them, not the wierd little cut off corner connection that is on the underside of my TP2
wht the hell have i forgotten?
is there an adapter i need to buy or summin?
I am thoroughly confused
Thanks for any help
TM411
No they will work fine, for Data and Power transfer normasl mini-usb cables work fine, you only need the EXT-USB connector (the cut off one) for video and sound transfer (headphones etc.)
Excellent,
Thankyou very much
It' s kind of strange, isn't it. But all mini usb connectors will fit.
Related
Does anyone know where I can buy the plug that plugs into the bottom connector for an XDAIIs?
I've asked everyone I can think of, searched Google, Maplin(UK) and Expansys and I can't find one.
It's probably because I don't know the correct name for it!
Ideally, I'd like one that has all 22 connections and even cables attached - they look really hard to solder onto by hand!
Any information would be greatfully received :lol:
Thanks
...Spence
http://www.gomadic.com/connectors.html sells connectors
Wallaby, Himalaya are compatible with HP iPAQ Connector Plug Assembly (19/22/38/39/41/43/51/54/5500 Series)
but read that the plug of BlueAngel is not exactly the same.
I purchased an XDA II car charger from the O2 shop in Manchester - it came with a plug that works fine with my XDA2s - have used it on the car charger and on the supplied power lead - charges fine.
When I got my IIs, it CAME with the plug already, any standard car charger can plug right into that plug and then the IIs... You sure you guys didn't get it?????
I think you mis-understood me - I'll try again!
I have developed a complete installed car kit for XDA, XDAII and IIs that does the following.
Mutes stereo when in call and puts all sound to front speakers
Can put navigation commands through the stereo
Hooks up to external microphone
Has PS2 (Holux) and RJ11 (TomTom and Leadtek) GPS connections
Charges device
I'm trying to get hold of a connector with 22 connections because I have one problem left.
To switch the car kit on, I either need a 5V feed from the device OR need to be able to put 5V in on one pin and get 5V out of another.
If anyone can help with either the connector or letting me know which pins I might be able to use send me a mail please
Thanks
...Spence
connectors
have you tried RS componets or CPC.?
Hi all,
As per subject...
Anyone know if such as cable is available?
I was planning on getting the new 3-1 Adaptor for the TYTN to make use of the 3.5mm jack and charging feature in my car.
The thing is, the cable for this adaptor is very short and cannot be hidden easily when in the car. So, I was thinking of using an extension cable of some sort, so the adaptor could be more easily hidden elsewhere under the centre console.
Many thanks.
USB Stupidity
Hi,
Affraid i didn't find anything either, and wanted to do the same thing.
I resorted to buying the cable from expansis and "Adapting it my self"
The project was fairly simple, and if your happy with a soldering iron and a multimeter you should be fine.
I now have a small connector on my dash that will disapears under the dashboard to a breakout box. All i basicly did was chop off the box that has the two female connectors in it, extend the wire with an old cut up parralel printer cable (multicore and was lying arround) and then terminated in a project box from maplins.
This has two headphone sockets, (audio out stero, and mic in) as well as a USB socket to charge the phone. (the plan was to have the USB socket be usable for data... but that bit went a bit wrong...
Still from the testing i have done, i now have tomtom and WindowsMedia mp3 play back comming through my car stero, and my VarioII reports to be charging. Havn't had a chance to test it on a long drive yet, i think i might still need a beefier 12Volt to USB adapter.
If anyone want more info on what i did, i'd be glad to help.
here are some pics, sorry v bad Q....
I don't seem to see any pics?...
Ooops...
here you go
Seems good to me- as long as it all works ok then its a good job.
Always been interesting in making my own adapters/cables but have never tried. Perhaps I should give it a go!
sh500 said:
Hi all,
As per subject...
Anyone know if such as cable is available?
I was planning on getting the new 3-1 Adaptor for the TYTN to make use of the 3.5mm jack and charging feature in my car.
The thing is, the cable for this adaptor is very short and cannot be hidden easily when in the car. So, I was thinking of using an extension cable of some sort, so the adaptor could be more easily hidden elsewhere under the centre console.
Many thanks.
Click to expand...
Click to collapse
Any news on that extension cable yet; is it available?
i brought one of these and successfully lengthened it with an old peice of printer cable (only multi core cable i had to hand)
i then used an off the shelf diy project box to hide the junction in.
worked very well, but i have since changed to a bluetooth car kit.
the soldering was a little small and working out which wire was which was a bit of a pain, but all in all only took an hour or so to sort out. probably worth it.
(AFAIK my dad is still using the one i adapted.)
sorry to put old post on top !! but own a dimaond and just buy a touch HD !
i a m looking for this kind of cable !!
If someone have info !!
where to buy for exemple ?
thanks in advance !!
how about extending the power cable? seems like that would be easier.
3in1 11 PIN ExtUSB Earphone Handsfree Adapter for HTC
Other option: http://cgi.ebay.com/3in1-11-PIN-Ext...AU_MobilePhoneAccessories&hash=item3cabfd9d0b
Here's a good one for ya, I need to replace the 11 pin connector on my Hermes, I already have a replacement jack thats the standard 5 pin mini usb, I know it won't be fully functional, i just want the darn thing to charge and i know the standard will do that as well as sync w/ a computer. Now my problem is, theres the 11 pads to solder onto on the board, but i don't know which is what. So, if one of you techies knows the answer, GREAT! if no one knows it, if you could by chance just take a photo at about 45 degree angle looking at the back of the usb jack, that would be AWESOME! I've looked through the wiki and cant find any pics of the angle i need.... Thanks for your help guys!!
Michael Brown
Usb conenctor
I think you already know this web page but:
htc-usb-pinout
I houpe it would be heplful.
Ah, I was looking to buy one cause mine is broke. If you know where I can buy it I would be very thanfull.
see ya
Could you guys help me too, i believe any of the pins o USB jack of my JASJAM broke, the phone still charges, but it doesnot help me to get connected with computer or data transfer..
did you check out the link ?
yeap i guess one of the DATA either + or - pin is short. Can we check it with Voltmeter instead of opening the whole device?
replacement for the USB connetor
Hello together,
has anyone an idea were to buy the 11pin usb connector which is inside the Hermes?
Greetings Pudl
11 pin socket!
htc do a little adapter that allows charging and a wired headset to be used at once isn't this the answer to all your problems?
1: remove 11 pin socket and solder into your fone! could be the same as the one in your fone!
2: wire it into your stereo and attatch 5 volts to charge it in the car
job done?
i removed the plastic from the plug and fitted it in place of the mini usb plug in my brodit active holder and can charge and use my wired headset at the same time if i need to
i also cut the plastic off a headset and added wires so i could charge and listen at the same time, i removed the headphone speakers and fitted a 3.5mm socket which allows me to plug it into anything with a line in socket. i can even use it as a speakerfone as i fitted the socket after the microphone!!!
professormark said:
htc do a little adapter that allows charging and a wired headset to be used at once isn't this the answer to all your problems?
1: remove 11 pin socket and solder into your fone! could be the same as the one in your fone!
2: wire it into your stereo and attatch 5 volts to charge it in the car
job done?
i removed the plastic from the plug and fitted it in place of the mini usb plug in my brodit active holder and can charge and use my wired headset at the same time if i need to
i also cut the plastic off a headset and added wires so i could charge and listen at the same time, i removed the headphone speakers and fitted a 3.5mm socket which allows me to plug it into anything with a line in socket. i can even use it as a speakerfone as i fitted the socket after the microphone!!!
Click to expand...
Click to collapse
Sounds interesting... Do you have pictures of this monster creation???
Hi all,
I have bought an headset adapter from ebay marked as TyTN compatible, however when connected to my Hermes I can hear the sound only on the left speaker; is the mini-USB port different from the TyTN one or is the adapter faulty?
Many thanks!
Mike
here is the link to the adapter:
http://cgi.ebay.co.uk/Headphone-Ada...66:2|39:1|72:1683|240:1318|301:1|293:1|294:50
Thanks
all newer htc devices have the same connector
it's not miniUSB it's EXTUSB which is pretty much
miniUSB and with audio connectors on the other side
so unless that place sell mono audio connectors only
it's defect or you havet pushed the connector all the way in
Thanks Rudegar for your explanation!
Yes I have pushed the connector properly in....I have tried few times and also with using different headsets...
I will ask for a replacement then.
Thank you again, have a nice day.
Mike
It most probably isn't connecting the pins right, yet mini usb works for Ativesync and charging.
I have a MHL Adapter and I get video just fine. Now I want to be able to sit on my couch while i use the adapter. Seems to me the simplest way would be to use a 15-20 foot Micro USB Male - Micro USB Female extension cable.
Does anyone have any experience with such a setup? Do you have a recommendation for such a cable?
TIA!!
Why micro USB? You can get a HDMI cable as long as you might want (Monoprice is particularly good). If it's not enough you can carry a HDMI signal over a single or (simpler to find) two CAT5 cables w/ RJ45 jacks for hundreds of feet.
I guess the thought was that if I have the Micro USB Extension, then it's one thin lightweight wire that has to travel across the floor.
If I did HDMI, I'd still have to be near power whereas with Micro USB, I could set the power adapter, and HDMI, and MHL Adapter all together and then have a thin and lightweight wire traveling across the floor.
But if it's not possible, (micro USB limitiation??) then HDMI it would have to be.
bean1975 said:
Why micro USB? You can get a HDMI cable as long as you might want (Monoprice is particularly good). If it's not enough you can carry a HDMI signal over a single or (simpler to find) two CAT5 cables w/ RJ45 jacks for hundreds of feet.
Click to expand...
Click to collapse
If the micro USB works it would be much cheaper than a comparable length hdmi cord.
Sent from my SAMSUNG-SGH-I717 using Tapatalk
I would test http://www.amazon.com/Extender-over-CAT5E-CAT6-connection/dp/B003L14ZTC this. It's hard to get cheaper than cat5e.
Just bought 10 feet on amazon! Lovely!
Sent from my SAMSUNG-SGH-I717 using Tapatalk
I wanted to do exactly this - extend the cable but at the micro-USB end to avoid having the Micro-usb power supply line and the bulky MHL adaptor all where the phone is - much cleaner to just have a thin cable coming out of the phone and headed towards the TV.
I did get hold of a micro-USB extension cable (2m/6ft) but unfortunately it does not work. Directly plugging the phone into the MHL adaptor works perfectly, as soon as I insert the micro-USB extension it doesn't work. I need to have a closer look to check the pins are populated etc, but not sure why this would be an issue - don't think it can be signal strength and if all the pins are populated I don't see why the adaptor would care.????
Any thoughts?
Micro B USB extension not working
I, too have been trying to figure out why an extension cable doesn't work the way you think it might. Today, I tried cutting my 6 foot cable, first making sure I had the right power leads working. Then I went through all the possible combinations of connections to see if one would work. None do. I'm at a complete loss on this wondering what I should try next.
Thanks for info....similarly baffled but at least you have ruled out something!
Like the other guy said, get your x for of hdmi cable, then just plug your AC charger in where you are. Mhl might use additional connectors/pins/whatever vs micro USB. Or you can go totally wireless and use a Bluetooth mouse and keyboard.
Also I remember I had a charging issue with an extension. Sometimes one product works better than others. I can't charge my phone with my 20 dollar AC charger from best buy since the ICS leak. It's weird. Hdmi cables are pretty uniform, I would just extend that.
Sent from my SAMSUNG-SGH-I717 using XDA
Yes, that works, always has, but that's not the point. Would rather have just one long cable connected to the phone in front of the TV rather than three cables, the device and the phone in a kludge setup.
A partial answer
This allows connecting 6 feet away with a thin, flexible single cable..Also cheap, but shipping takes 15 days.
goo.gl/NzCik
Gavdroid said:
I did get hold of a micro-USB extension cable (2m/6ft) but unfortunately it does not work. Directly plugging the phone into the MHL adaptor works perfectly, as soon as I insert the micro-USB extension it doesn't work. I need to have a closer look to check the pins are populated etc, but not sure why this would be an issue - don't think it can be signal strength and if all the pins are populated I don't see why the adaptor would care.????
Any thoughts?
Click to expand...
Click to collapse
I took apart the two cables and the USB has four wires while the MHL cable has ten.
are the mhl wires easily extendable themselves by splicing? I'm thinking strip out a few usb cables and use the wires? Or just go purchase some extremely thin gauge wire (22 gauge) and make it yourself?
Micro B USB extension not working
The Micro B USB connector only has 5 connections, so there is no way you can connect 10 from the MHL cable to it, so something else is going on.
pinoutsguide.com/PortableDevices/micro_usb_pinout.shtml
amblix said:
are the mhl wires easily extendable themselves by splicing? I'm thinking strip out a few usb cables and use the wires? Or just go purchase some extremely thin gauge wire (22 gauge) and make it yourself?
Click to expand...
Click to collapse
I bought splices and thought about extending the cable. It's possible.
galaxy s3
I did wanted to do the same but the extension cable didn't work. I looked at the connecting points and felt that the micro usb from Mel adaptor is to bit longer than usual so I thought that may be the reason and I shorten it resulting damaging my Mel adaptor itself. Now I am going for allshare cast wireless hub. So everyone please don't try to cut the micro usb pin from your adaptor or u will better decide to for my option to for complete flexibility.
I want to do this EXACT same thing but slightly more extreme:
I want an MHL adapter with 10-25 feet of micro USB cable on the end so I can use it from anywhere in my living room.
Is there any such cable/adapter?
Why do all MHL adapters come with only a 5 inch cable??? It is maddening!
*bump* I am looking for this too.. but I have a reason slightly different.. I have an AppRadio in my car that I connect my phone to. The MHL cable end is rather bulky and does not fit into the opening of my otterbox that is on my phone... most microUSB wires fit into the opening just fine.. Taking my phone out of the case every time I am in the car is rather ridiculous so I bought the micro USB extension (bought a 6" one).. didn;t even register except to charge... So, and ideas would be greatly appreciated..
Teej53214 said:
*bump* I am looking for this too.. but I have a reason slightly different.. I have an AppRadio in my car that I connect my phone to. The MHL cable end is rather bulky and does not fit into the opening of my otterbox that is on my phone... most microUSB wires fit into the opening just fine.. Taking my phone out of the case every time I am in the car is rather ridiculous so I bought the micro USB extension (bought a 6" one).. didn;t even register except to charge... So, and ideas would be greatly appreciated..
Click to expand...
Click to collapse
Get a different MHL adapter. I use an adapter close to the one 7 posts up by hedaleth with my kenwood system in my truck.