Does anyone know where I can buy the plug that plugs into the bottom connector for an XDAIIs?
I've asked everyone I can think of, searched Google, Maplin(UK) and Expansys and I can't find one.
It's probably because I don't know the correct name for it!
Ideally, I'd like one that has all 22 connections and even cables attached - they look really hard to solder onto by hand!
Any information would be greatfully received :lol:
Thanks
...Spence
http://www.gomadic.com/connectors.html sells connectors
Wallaby, Himalaya are compatible with HP iPAQ Connector Plug Assembly (19/22/38/39/41/43/51/54/5500 Series)
but read that the plug of BlueAngel is not exactly the same.
I purchased an XDA II car charger from the O2 shop in Manchester - it came with a plug that works fine with my XDA2s - have used it on the car charger and on the supplied power lead - charges fine.
When I got my IIs, it CAME with the plug already, any standard car charger can plug right into that plug and then the IIs... You sure you guys didn't get it?????
I think you mis-understood me - I'll try again!
I have developed a complete installed car kit for XDA, XDAII and IIs that does the following.
Mutes stereo when in call and puts all sound to front speakers
Can put navigation commands through the stereo
Hooks up to external microphone
Has PS2 (Holux) and RJ11 (TomTom and Leadtek) GPS connections
Charges device
I'm trying to get hold of a connector with 22 connections because I have one problem left.
To switch the car kit on, I either need a 5V feed from the device OR need to be able to put 5V in on one pin and get 5V out of another.
If anyone can help with either the connector or letting me know which pins I might be able to use send me a mail please
Thanks
...Spence
connectors
have you tried RS componets or CPC.?
Related
Ive read many post on here and others. I must say Im confused.
Is the new Blue Angel connector physically the same as the previous XDAII connector?
Are the pin outs the same?
Some people say no problem, some are filing theirs down??? Some are "forcing it in" - YIKES
i would love to know as well
The pin outs are the same - the connector is physically the same size, but there is one minor change - there is a little 'step' on one edge of the connector.
XDAII accessories, such as chargers, usb and gps do fit but you need to be careful when you insert them.
Forget my stupidity. I used to own the Siemens SX56 and had hotsync and car charger cables.
The question is now I have the Siemens SX66, is it safe to use the same cables from the SX56? I haven't tried it since I don't want to kill my new toy!
If anyone knows or can verify that it's safe it would be really appreciated.
I am using car charger, usb sync cable and wired gps that were originally bought for my XDA1, then used on XDAII and now work fine on MDAIII.
Do any of the serial keyboards work with XDA IIs?
I tried to connect the stowaway keyboard I used with my XDA II but it does not seem to work with my QTEK 9090.
I'm only guessing, but I would think that the drivers weren't written for wm2003SE.
I have the darfon fold out keyboard that I bought for my sx56, and last night I got it working just fine with my new sx66, so yes, they work. I needed to go to darfon.com and download the newest version of the driver.
I have one of the IR keyboards and the supplied driver works fine, but I have to balance the MDAIII on something to make it high enough for the IR receiver on the keyboard because the MDAIII IR is on the side.
The pin outs are the same
Click to expand...
Click to collapse
They are not!!!!!
There is a voltage output from an XDAII when in a call, but the XDA IIs doesn't give the voltage!
Can't remember which pin off the top of my head but I have been testing this and found this to be a major problem when designing a proper car kit for both items!
..Spence
Bit worried about using my incar chrger from my xdaII for my IIs. Does anyone know where I can get a charger or usb sync cheaply for the IIs/pd2k? Expansys are charging £20! There's one here:
http://www.firstphoneshop.co.uk/o2-phone-accessories/o2-imate-pda2k.shtml
But i'm not sure its not just the old II charger...
Hi all,
I see birdog has put piccies up at:
http://forum.xda-developers.com/viewtopic.php?t=18435&highlight=pin+blue+angel
(and thanks btw) but can anyone confirm this pinout?
Cheers!
Hello,
I just noticed there are many Mini-USB to 3.5 (or 2.5) audio adapters on sale at e-Bay, like this.
All of them seem to be for Motorola phones, though. Anyone has tried on the TyTN?
I seem to remember reading somewhere in GENERAL that they would not. Someone asked HTC and they said it was propietry - but they would have an adapter out soon(ish).
Rich
I can't see why it shouldn't work... it's just £5 so what's the loss if it doesn't...
EDIT: I've bought one today. I'll tell if it works or not....
The port is NOT proprietary. It is a standard mini-USB, and takes standard mini-USB cables.
They tweaked the socket a little bit to go along with their new proprietary headset.
In other words, you can plug in any standard mini-usb cable/accessory, but you can't plug the headset into any standard mini-usb port.
Sorta "dain-bramaged" if you ask me, but since I use a bluetooth headset, it's a non-issue.
Charge and audio simulataneously?
So, how do I both charge the unit and listen to music (wired headphones) at the same time? Does anyone know?
There is an alternative to an adapter. As they say on Blue Peter, here's one I made earlier.......
http://www.4winmobile.com/tutorial-replace-hermes-headset-connector-with-35mm-socket-vt3146.html
I asked htc for an adapter
here ist the answer:
Dear Sir
At present HTC does not manufacture, supply or support such a connection and HTC cannot supply such a diagram.
Click to expand...
Click to collapse
Re: Charge and audio simulataneously?
Manne said:
So, how do I both charge the unit and listen to music (wired headphones) at the same time? Does anyone know?
Click to expand...
Click to collapse
Easy answer: get an iPod! :lol:
Hello,
I tried one of those "motorola / razr" headphone adapters on sale at ebay. while the adapter fits nicely it doesn't work. Tytn just doesn't seem to recognize it.
Any thoughts of why it doesn't work and alternatives greatly appreciated.
Hello,
I tried one of those "motorola / razr" headphone adapters on sale at ebay. while the adapter fits nicely it doesn't work. Tytn just doesn't seem to recognize it.
Any thoughts of why it doesn't work and alternatives greatly appreciated.
I seem to remember reading somewhere in GENERAL that they would not. Someone asked HTC and they said it was propietry
Click to expand...
Click to collapse
If you look at the connector the motorola one has 5 pins across the top of the it. If you look at the Tytn on it has 5 pins across the top and 6 across the bottom. In order to be compatible with current chargers the top 5 pins supply the charging and the bottom 6 supply headset and serial connections.
I do not intend to use the "Line out" function of my TyTN often but it DOES lack an audio output. Sometimes I need to connect the device to speakers and etc.
It should be a modified mini USB port that the TyTN has and that must have saved some space over traditional 2.5mm sockets. We all know 2.5 sockets are not common and you need an apaptor to change it to 3.5mm anyway so prolly HTC gave up on the 2.5 and made the USB standard.
I am pretty sure that some accessory will come out.
Does anyone know if the Ebay adaptor cable will work on the TyTN?
Most of the ebay adapters are standard usb mini for use with the razor etc. These will not work. It needs to be an adapter specifically for the Tytn.
thanks! It is really stupid for HTC not to launch any accessories for the TyTN(or other releases).
Like the Atom Exec has factory cradle kit, battery, silicon cases, leather straps and etc. I don't even know where to get an extra battery!
Thought of one of these:
http://www.audiocubes.com/product_info.php?products_id=1736
zakeen said:
Thought of one of these:
http://www.audiocubes.com/product_info.php?products_id=1736
Click to expand...
Click to collapse
has anyone tested it?
is it working with tytn ?
for a hundred something i can get a pair of entry level high end SHURE headphones or even one with the mic.. all I need is a 2.5 Plug.
for a hundred something i can get a pair of entry level high end SHURE headphones or even one with the mic.. all I need is a 2.5 Plug.
http://cgi.ebay.com/Stereo-Audio-Ad...58QQihZ007QQcategoryZ3311QQrdZ1QQcmdZViewItem
Anyone used these yet?
Hi all,
As per subject...
Anyone know if such as cable is available?
I was planning on getting the new 3-1 Adaptor for the TYTN to make use of the 3.5mm jack and charging feature in my car.
The thing is, the cable for this adaptor is very short and cannot be hidden easily when in the car. So, I was thinking of using an extension cable of some sort, so the adaptor could be more easily hidden elsewhere under the centre console.
Many thanks.
USB Stupidity
Hi,
Affraid i didn't find anything either, and wanted to do the same thing.
I resorted to buying the cable from expansis and "Adapting it my self"
The project was fairly simple, and if your happy with a soldering iron and a multimeter you should be fine.
I now have a small connector on my dash that will disapears under the dashboard to a breakout box. All i basicly did was chop off the box that has the two female connectors in it, extend the wire with an old cut up parralel printer cable (multicore and was lying arround) and then terminated in a project box from maplins.
This has two headphone sockets, (audio out stero, and mic in) as well as a USB socket to charge the phone. (the plan was to have the USB socket be usable for data... but that bit went a bit wrong...
Still from the testing i have done, i now have tomtom and WindowsMedia mp3 play back comming through my car stero, and my VarioII reports to be charging. Havn't had a chance to test it on a long drive yet, i think i might still need a beefier 12Volt to USB adapter.
If anyone want more info on what i did, i'd be glad to help.
here are some pics, sorry v bad Q....
I don't seem to see any pics?...
Ooops...
here you go
Seems good to me- as long as it all works ok then its a good job.
Always been interesting in making my own adapters/cables but have never tried. Perhaps I should give it a go!
sh500 said:
Hi all,
As per subject...
Anyone know if such as cable is available?
I was planning on getting the new 3-1 Adaptor for the TYTN to make use of the 3.5mm jack and charging feature in my car.
The thing is, the cable for this adaptor is very short and cannot be hidden easily when in the car. So, I was thinking of using an extension cable of some sort, so the adaptor could be more easily hidden elsewhere under the centre console.
Many thanks.
Click to expand...
Click to collapse
Any news on that extension cable yet; is it available?
i brought one of these and successfully lengthened it with an old peice of printer cable (only multi core cable i had to hand)
i then used an off the shelf diy project box to hide the junction in.
worked very well, but i have since changed to a bluetooth car kit.
the soldering was a little small and working out which wire was which was a bit of a pain, but all in all only took an hour or so to sort out. probably worth it.
(AFAIK my dad is still using the one i adapted.)
sorry to put old post on top !! but own a dimaond and just buy a touch HD !
i a m looking for this kind of cable !!
If someone have info !!
where to buy for exemple ?
thanks in advance !!
how about extending the power cable? seems like that would be easier.
3in1 11 PIN ExtUSB Earphone Handsfree Adapter for HTC
Other option: http://cgi.ebay.com/3in1-11-PIN-Ext...AU_MobilePhoneAccessories&hash=item3cabfd9d0b
Here's a good one for ya, I need to replace the 11 pin connector on my Hermes, I already have a replacement jack thats the standard 5 pin mini usb, I know it won't be fully functional, i just want the darn thing to charge and i know the standard will do that as well as sync w/ a computer. Now my problem is, theres the 11 pads to solder onto on the board, but i don't know which is what. So, if one of you techies knows the answer, GREAT! if no one knows it, if you could by chance just take a photo at about 45 degree angle looking at the back of the usb jack, that would be AWESOME! I've looked through the wiki and cant find any pics of the angle i need.... Thanks for your help guys!!
Michael Brown
Usb conenctor
I think you already know this web page but:
htc-usb-pinout
I houpe it would be heplful.
Ah, I was looking to buy one cause mine is broke. If you know where I can buy it I would be very thanfull.
see ya
Could you guys help me too, i believe any of the pins o USB jack of my JASJAM broke, the phone still charges, but it doesnot help me to get connected with computer or data transfer..
did you check out the link ?
yeap i guess one of the DATA either + or - pin is short. Can we check it with Voltmeter instead of opening the whole device?
replacement for the USB connetor
Hello together,
has anyone an idea were to buy the 11pin usb connector which is inside the Hermes?
Greetings Pudl
11 pin socket!
htc do a little adapter that allows charging and a wired headset to be used at once isn't this the answer to all your problems?
1: remove 11 pin socket and solder into your fone! could be the same as the one in your fone!
2: wire it into your stereo and attatch 5 volts to charge it in the car
job done?
i removed the plastic from the plug and fitted it in place of the mini usb plug in my brodit active holder and can charge and use my wired headset at the same time if i need to
i also cut the plastic off a headset and added wires so i could charge and listen at the same time, i removed the headphone speakers and fitted a 3.5mm socket which allows me to plug it into anything with a line in socket. i can even use it as a speakerfone as i fitted the socket after the microphone!!!
professormark said:
htc do a little adapter that allows charging and a wired headset to be used at once isn't this the answer to all your problems?
1: remove 11 pin socket and solder into your fone! could be the same as the one in your fone!
2: wire it into your stereo and attatch 5 volts to charge it in the car
job done?
i removed the plastic from the plug and fitted it in place of the mini usb plug in my brodit active holder and can charge and use my wired headset at the same time if i need to
i also cut the plastic off a headset and added wires so i could charge and listen at the same time, i removed the headphone speakers and fitted a 3.5mm socket which allows me to plug it into anything with a line in socket. i can even use it as a speakerfone as i fitted the socket after the microphone!!!
Click to expand...
Click to collapse
Sounds interesting... Do you have pictures of this monster creation???
Hey guys, i am hoping i missed something really stupid.
But i just bought a few accessories for my TP2.
I bought an extra charger, and an extra USB connection for my Cradle, and an official HTC car charger
All marked as being for the TP2
But they have a standard Mini-USB connection on them, not the wierd little cut off corner connection that is on the underside of my TP2
wht the hell have i forgotten?
is there an adapter i need to buy or summin?
I am thoroughly confused
Thanks for any help
TM411
No they will work fine, for Data and Power transfer normasl mini-usb cables work fine, you only need the EXT-USB connector (the cut off one) for video and sound transfer (headphones etc.)
Excellent,
Thankyou very much
It' s kind of strange, isn't it. But all mini usb connectors will fit.