Related
Good evening;
I have a problem with my new Vodafone v1605, I unlock the ext_rom and quite perfectly. But one of the times that remove a program that was installed gave to me a mistake of which the memory was full, and since then already I do not have access to it and it does not appear in the information of the system either it (has disappeared).
I had done a hard reset and the files that there in it if they established themselves but there is no way of being able to accede of to be able to see the version. Someone can help me with this problem?.
Thank you and a greeting to all
PD. SORRY FOR MY BAD ENGLISH, I'M FROM SPAIN.
Same here on my Vodafone HT626F..
Unlocked/Mounted extrom, it was properly accessible from the
beginning.
Then after 10 days or so the screen alignment problem appeared,
I decided to do a hard-reset. Since then I'm not able to
unlock/mount the extrom anymore, not with the cabs around here,
nor using fit4cat tool.
I also tried soft-reset before the extrom stuff gets installed
(so extrom is still there and all the cabs are present), still the
same, it's not possible to unlock it.
Anyway I'm thinking to replace the damn thing, since screen
alignment drives me crazy, so I'm not looking further into this
problem
does it install after hard reset?
What do you have in this registry keys?
HKLM\System\StorageManager\AutoLoad\EXT_FLASHDRV
HKLM\System\StorageManager\Profiles\EXT_FLASHDRV
EXT-ROM
Hello, any ideas?.
Anyone have the same problem?
Thanks in advance.
pof said:
does it install after hard reset?
What do you have in this registry keys?
HKLM\System\StorageManager\AutoLoad\EXT_FLASHDRV
Click to expand...
Click to collapse
I have the same problem,
In
HKLM\System\StorageManager\AutoLoad\EXT_FLASHDRV
I have:
Default
Bootphase 0x2 (2)
DriverPath _Drivers\BuiltIn\EXT_FLASHDRV
LoadFlags ox1 (1)
Order 0x12 (18)
I dont't find
HKLM\System\StorageManager\Profiles\EXT_FLASHDRV
Matteo66 said:
I dont't find
HKLM\System\StorageManager\Profiles\EXT_FLASHDRV
Click to expand...
Click to collapse
Try importing the attached reg file and see if it fixes the problem.
Thank you for your support
Now I can see HKLM\System\StorageManager\Profiles\EXT_FLASHDRV, but my extended ROM is still locked. Any other solution?
i think most of you x01ht users in japan are aware that softbank issued a new rom update that has the new open.softbank.ne.jp password hard-coded as part of the rom image and so there's no way to extract it via extended rom or otherwise (it's not in the preconfig cabs/xmls either). they've also announced that after april 1, the old password which most of in japan are currently using will no longer work so we either upgrade to the new softbank rom or we can't access the open network.
anyway, i've been fiddling with this all night and i think i have a solution that i've tested on a couple of different roms but i'm hoping you guys can give it a try as well so that we can call this a solution to the problem. basically, i made the assumption that the password was somewhere hidden and encrypted in the registry though i had no idea where so basically all i did was do a registry dump with a clean install of the new sb rom, went into connections and deleted the softbank connection, then did another registry dump. finally, i did a compare of the before and after using windiff, figured out what changed and i ended up with the attached two reg files. one adds "SoftBank" as one of the connections (hklm.reg) and the other is the encrypted password (hkcu.reg). you need to import these using the registry plug-in that comes with resco explorer (just dl the trial) as that's what i used and it seemed to work. also, after you do the imports, MAKE SURE you power off (not reset) and then power back on. sometimes the registry settings don't stick if you simply reboot.
to really verify this works, you should first go in and delete your existing SoftBank connection in settings->connections tab->connections->manage existing connections (under internet). if you're not confident then go ahead do a backup beforehand or you can just run the sb extended rom again if you can't get it to work. i've tried this with the sb rom as well as an i-mate rom and it's working perfectly...i'll test it with a couple other tomorrow as well. if this works for you guys, i'll go ahead and make it into a cab file.
update: okay, i've gone ahead and made it into a cab so you don't have to muck around with importing reg files. so just download the cab if you want to run a simple cab install. the zip file contains the reg files if you want to manually import yourself. i've tested both and they work fine. again, i must emphasize that you power off after installing it and not just soft reset. try it out and let me know.
FOR THOSE OF YOU DOING CLEAN INSTALLS:
i didn't realize this but when you do a clean install, you still have to install a couple of the sb extended roms before you run my cab. specifically, you need to run PP_ConnVKK_1.33.761.1.CAB and Provisioning.exe to set up the device to even be able to accept the new password/settings. run PP_ConnVKK_1.33.761.1.CAB first and then Provisioning.exe...now once you run provisioning.exe, you'll find that it automatically creates the old SoftBank connection for you under internet->manage existing connections with the OLD password. go ahead and delete this connection, reboot (optional) and then run my cab (new sb settings.cab). power down and up again and it should work.
just to be sure i did a file compare of the [HKEY_CURRENT_USER\Comm\RasBook\SoftBank] "Entry" and "DevCfg" keys/entries with the old SoftBank setting active and with the new SoftBank settings active and the file compare showed that the contents were completely different. i was worried that maybe somehow the system was just somehow reviving the old password and not actually using the new one but this does not appear to be the case.
UPDATE:
after some more experimenting, it seems that the cab just restores the sb connection with whatever username/pass that you had installed previously. if you delete the the new opensoftbank username connection and then run the cab, it restores the opensoftbank username/password. if you delete the old "open" username connection, it restores that. very strange since the file compare shows that this registry dump (taken from new rom with new settings) is significantly different than a dump taken from a rom with the old settings yet it is somehow restoring the old settings. thanks for looking into this but for now, i think we have to say that this isn't working. so it seems that password is not simply stored in the registry. it must be in some hidden file that this registry dump somehow activates. in any case, i'll keep working over the coming weeks. sorry for getting everyone's hopes up.
Wow, I think that is great news for every Softbank customer!
Thanks it worked for me. I guess I will find out in April if it will work. I will cross my fingers.
Great job!!
You are the man! Great!!
thanks for checking! are you saying you're unsure if the file actually contains the NEW password and not the old one? well, it's definitely the new password as i created these files using only the new rom, a reg editor and a file compare tool so the old password never entered the picture.
you can actually run this exercise yourself and just repeat the steps i did if you want to be sure as the methodology is pretty simple. all i did was find where the encryped passwd was stored in registry and just imported it over to a different rom as is, encryption in tact. i've made no attempt to hack the actual passwd--we still have no idea what it is but as long as we can use the new settings, finding out what the passwd actually is unnecessary.
jokinawa said:
Thanks it worked for me. I guess I will find out in April if it will work. I will cross my fingers.
Click to expand...
Click to collapse
i haven't tried this yet, but if it works for you using the new ap opensoftbank now, i believe you don't have to wait until april to see if it'll work. those who've already upgraded theirs to the new rom should be using that new ap already.
i must try this myself later today.
trialdei, thanks for the great work.
that is indeed a great news, I was also wondering how to find this in the registery but was not sure that the different key I found were the correct ones. I will try on my other Hermes tonight and we shall see ! But the very promissing point here is that potentially I can even use these files for my universal and the mteor... which means... if you don't like the crap of the SB roms... just buy a WM5 device everywhere U want and put these regkeys !!!
Good job Man !!!
Yes this is great news, I think we might still need the password to use the phone as a modem connected to a notebook.
I think that is exactly what softbank does not want us users using the connection for since we would use the internet more.
okinz said:
Yes this is great news, I think we might still need the password to use the phone as a modem connected to a notebook.
I think that is exactly what softbank does not want us users using the connection for since we would use the internet more.
Click to expand...
Click to collapse
actually, i don't think you need to enter the password on the pc side at all to use the phone as a modem. check this post:
http://forum.xda-developers.com/sho...etooth+set+TyTN+to+be+discoverable#post987712
how about us with new sb rom... i don't see any wireless modem application on my phone... do you have a cab file for the wireless modem app alone?. i can't find it from ftp...
guys,
softbank is blocking the modem usage with a pc and it seems that's controlled at their open ap. i don't believe that's anything to do with the password nor the applications you use. you can fire up dun on your pc with x01ht connected via usb or bt, but the connection will fail.
harryk1372 said:
guys,
softbank is blocking the modem usage with a pc and it seems that's controlled at their open ap. i don't believe that's anything to do with the password nor the applications you use. you can fire up dun on your pc with x01ht connected via usb or bt, but the connection will fail.
Click to expand...
Click to collapse
i think you're probably right but then i wonder what's the point of establishing the new password in the first place if the modem usage isn't an issue for them either way? all of the x01ht's making their way to hk and abroad aren't going to be used on the sb network anyway. the new read-only radio rom takes care of simlocking already so the new passwd solves what? they just don't like the idea of people running around with foreign language roms accessing their network?
trialdei said:
so the new passwd solves what? they just don't like the idea of people running around with foreign language roms accessing their network?
Click to expand...
Click to collapse
i think they don't want people without the flat rate data tariff contract to use the open ap to cap the monthly pay. there are quite a few people in japan who just had the vodafone contract and running universal or hermes bought from elsewhere.
now that i have your registry solution for the new password, i cannot resist testing it on my universal. if it works, i don't have to retire my universal after april 1. thanks again.
trialdei said:
basically, i made the assumption that the password was somewhere hidden and encrypted in the registry though i had no idea where so basically all i did was do a registry dump with a clean install of the new sb rom, went into connections and deleted the softbank connection, then did another registry dump. finally, i did a compare of the before and after using windiff, figured out what changed and i ended up with the attached two reg files.
Click to expand...
Click to collapse
great job, trialdei. i have not tried this yet, but i will not have to give up a2dp if this works with the docomo rom!! many thanks!
i'm a newbie on this topic softbank open access.
so what is the main purpose of having this option available for the user.
is it allow the user to have the internet access over the softbank network.
and also if possible, please guide where i can find addititional softbank open access setup instruction, besides the information is already provided by trialdie's original post on this string.
please advice.
found the existing thread on softbank open access (unlock softbank x01ht thread). got the answer from there.
great!
this is great! i was having problems with the new sb rom and asukal's mui... i can't seem to get any network signal or even passthrough connections with that combination..
i'll try this one with the new htc rom from south africa, it may work for me.
great work dude!
no connection appears even after importing the reg with docomo rom... i will try it again when i have more time.
qtotter said:
no connection appears even after importing the reg with docomo rom... i will try it again when i have more time.
Click to expand...
Click to collapse
hi qtotter,
you need to make sure your registry settings are sticking...did you power off/on. the below new registry keys/entries should show up if you did it right:
[HKEY_CURRENT_USER\Comm\RasBook\SoftBank]
"Entry"
"DevCfg"
[HKEY_LOCAL_MACHINE\Comm\ConnMgr\Providers\{7C4B7A38-5FF7-4bc1-80F6-5DA7870BB1AA}\Connections\SoftBank]
"ConnectionGUID"
"SecureLevel"
"Secure"
"AlwaysOn"
"RequirePw"
"Enabled"
"EntryType"
"DestId"
if you don't see these new keys/entries then your registry changes aren't sticking.
trialdei said:
i think most of you x01ht users in japan are aware that softbank issued a new rom update that has the new open.softbank.ne.jp password hard-coded as part of the rom image and so there's no way to extract it via extended rom or otherwise (it's not in the preconfig cabs/xmls either). they've also announced that after april 1, the old password which most of in japan are currently using will no longer work so we either upgrade to the new softbank rom or we can't access the open network.
anyway, i've been fiddling with this all night and i think i have a solution that i've tested on a couple of different roms but i'm hoping you guys can give it a try as well so that we can call this a solution to the problem. basically, i made the assumption that the password was somewhere hidden and encrypted in the registry though i had no idea where so basically all i did was do a registry dump with a clean install of the new sb rom, went into connections and deleted the softbank connection, then did another registry dump. finally, i did a compare of the before and after using windiff, figured out what changed and i ended up with the attached two reg files. one adds "SoftBank" as one of the connections (hklm.reg) and the other is the encrypted password (hkcu.reg). you need to import these using the registry plug-in that comes with resco explorer (just dl the trial) as that's what i used and it seemed to work. also, after you do the imports, MAKE SURE you power off (not reset) and then power back on. sometimes the registry settings don't stick if you simply reboot.
to really verify this works, you should first go in and delete your existing SoftBank connection in settings->connections tab->connections->manage existing connections (under internet). if you're not confident then go ahead do a backup beforehand or you can just run the sb extended rom again if you can't get it to work. i've tried this with the sb rom as well as an i-mate rom and it's working perfectly...i'll test it with a couple other tomorrow as well. if this works for you guys, i'll go ahead and make it into a cab file.
update: okay, i've gone ahead and made it into a cab so you don't have to muck around with importing reg files. so just download the cab if you want to run a simple cab install. the zip file contains the reg files if you want to manually import yourself. i've tested both and they work fine. again, i must emphasize that you power off after installing it and not just soft reset. try it out and let me know.
Click to expand...
Click to collapse
its great but it did not work in my o2 xda exec.
thanks
I found that my new x01ht include the video button calling, however, when I click it, It's show the keybad in the screen but does not have the function video calling. And also in the top, I could not see the 3G notification, but it only shows the U notification
Is there any thing wrong with my phone?
Help
war123 said:
I found that my new x01ht include the video button calling, however, when I click it, It's show the keybad in the screen but does not have the function video calling. And also in the top, I could not see the 3G notification, but it only shows the U notification
Is there any thing wrong with my phone?
Help
Click to expand...
Click to collapse
Did you let it run the preconfiguration? I think those features are added after the phone boots for the first time after a hard reset. (When you finish the stupid WM5 configuration wizard, the phone should come up with a message like "Configuring, Wait 3 seconds". If you pressed the reset button before this preconfigure script runs, you would be missing certain features such as the "3G" icon.
khammo01 said:
Did you let it run the preconfiguration? I think those features are added after the phone boots for the first time after a hard reset. (When you finish the stupid WM5 configuration wizard, the phone should come up with a message like "Configuring, Wait 3 seconds". If you pressed the reset button before this preconfigure script runs, you would be missing certain features such as the "3G" icon.
Click to expand...
Click to collapse
Thank you very much for your information.
I also thought about that but currently I don't know how to unhinde/unlock then \Extended_Rom folder. I don't want my x01ht run Extent Rom installation due to my x01ht is newest and can not sim unlocked.
If someone have the cabs file in x01ht extended_rom folder, could please send?
Thank you
I install cabs file from extended rom and it works
See attached x01ht extrom (except update_h182.exe).
i also have this problem actually with my X01HT. when i press the video calling button it just shows the dial pad. i have tried hard reset before and always left it alone to configure but still i have no luck in having the video calling function. can anyone help me out. and i dont have a 3G icon just the U icon.
marktang said:
i also have this problem actually with my X01HT. when i press the video calling button it just shows the dial pad. i have tried hard reset before and always left it alone to configure but still i have no luck in having the video calling function. can anyone help me out. and i dont have a 3G icon just the U icon.
Click to expand...
Click to collapse
I only install the x01ht extend rom cab file and It's work. I think you can install again the cab files that sent by pof
how would u install it? sorry im new to this WM phone thing. can u give me some instructions on what to do? cuz i see alot of files in the zip file. do i install all of them or what? sorry for being a n00b ive never used a WM phone before.
marktang said:
how would u install it? sorry im new to this WM phone thing. can u give me some instructions on what to do? cuz i see alot of files in the zip file. do i install all of them or what? sorry for being a n00b ive never used a WM phone before.
Click to expand...
Click to collapse
You download the x01ht extrom that pof sent.
Extract it and copy the cab files to your phone, run the cab files in order like Config.txt file.
oh alrite will try that...thnx alot
I upgraded to Spiaatie WM6.5 v3 - I get this message when I turn on my hx2750 - 'Unrecognized Card'
In the HP Wi-Fi Manager the link status says - 'Driver Not Loaded'
and in the version tab all three fields in the wireless LAN Information say
'Driver Not Loaded'
I have tried reinstalling v2 which worked before - Same problem and not all aspects of v3 removed such as the start up screen.
I have installed a wm6.1 version and this still did not solve the problem.
I have also tried going back to wm2003 from the HP site and again still missing drivers.
NONE of these options have worked.
I have searched all sorts of forums and even though others have had this problem NO solution has been posted.
Is this a hardware, Software or Registry problem?
If will test any options provided as I would really like to get it working again.
Any solution found will be posted in detail.
Many thanks in advance.
It would appear that if you went back to WM5 and even WM2003 and it still does not work then it's possible its a hardware issue. You may be out of luck with software fixing it. I'm running it with no problem and have not heard of anyone else having these issues. Especially with every version of software.
Thanks for getting back to me. I guess I will try taking it apart and seeing if any wires have come loose.
I anyone has any suggestions as to what to look for that would be good.
or if anyone has any other ideas as to how I might fix this please let me know.
I might go in Ebay and see if I can get a cheep Compact flash wireless card but would prefer not to as I use that to store data and music on while I use the SD card for Programs and TomTom data
Thanks
Update
OK took my Ipaq apart and got it back together without killing it
No luck though still no wireless.
Widened my search and found a russian site that detailed a simular problem and provided an update fix. My problem was that I could not get registered on their site.
Can someone help me and get the file 'up0015.cab' in this link
http://4pda.ru/forum/index.php?showtopic=57381&st=1220&p=1440781&#entry1440781
I can't understand why I could not login but this is supposed to solve my problem if you believe google translation
Thanks in advance.
osmanager said:
OK took my Ipaq apart and got it back together without killing it
No luck though still no wireless.
Widened my search and found a russian site that detailed a simular problem and provided an update fix. My problem was that I could not get registered on their site.
Can someone help me and get the file 'up0015.cab' in this link
http://4pda.ru/forum/index.php?showtopic=57381&st=1220&p=1440781&#entry1440781
I can't understand why I could not login but this is supposed to solve my problem if you believe google translation
Thanks in advance.
Click to expand...
Click to collapse
Is there anyone who speaks russian who can help me?
File up0015.cab
Here is the file you are looking for.
I have seen the same problem with the "driver not loaded" message on my
HX2790. Solved the problem by doing a hard reset if I remember correctly.
Since I haven't used this file myself I must stress that using it is at your own risk.
The file was made by the great cook Yurrix and can also be found on his website. That is where I got it from.
Website is: http://all2me.blogspot.com/2008/02/15.html
Hope this helps.
Greetz Rowley.
Update
Hi
Many thanks for the file.
However unfortunatly it did not work.
In my settings screens it updated my Network Adapter list to include a SAMSUNG WLAN CF CARD (SWL-23x0)
Did a Hard reset after - Calendar + Message + Power and reset - to get to Formating PS screen.
Now Network Adapter list says HP iPAQ Wi-Fi Adapter
However the HP Wi-Fi Manager says
Status - Link Status - Driver Not Loaded
Version - Wireless LAN Infromation - Driver Version: Driver Not Loaded
F/W Version : Driver Not Loaded
MAC Address : Driver not Loaded.
I then ran the inbuilt self test. This seems to give a false result if I test only the Wi-Fi it hangs but if I test it with other items it says it passes. But i don't believe it.
I now think my card is dead as someone told me earlier.
But I had to try.
Thanks to all who helped.
Here is the 0016wifi cab made by Yurrix.
same problem
Same problem as above, but I tried switching wireless cards with another hx2795 (one that won't charge the battery) and found they both work (just not connecting through the software or possible hardware path). I applied both the xxx15 fix and the xxx16wifi fix and neither one works.
if I can't find the answer, I will just have to use one as a battery charger and the other as my pda. . .
if anyone knows of a fix, please let me know.
thanks
Hey guys,
I have a HD2 with the following stats:
WM: 6.5
Manilla: 2.5.19211619.0
ROM: 1.66.405.2
Radio: 2.06.51.07
My phone works perfectly. Out of nowhere, without having installed any new apps, without a soft reset, nothing at all.
When I click on any quicklink, or any app under the start menu, I get the following error:
"The file ?????? cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found. If the problem persists try reinstalling or restorig the file"
??????? = the app or program I am trying to run.
This stops sense from loading. Only WM6.5 will run - without HTC sense.
I get this error for no reason. I have not installed any new software, I have not done a soft reset, nothing. Was using the phone all day and it was perfect. Then bang, I got this.
It has happened before and a hardware reset fixed it.
Does anyone know what on earth is causing it? I have SKcert and Cert2015 installed as I am using some custom icons. Do you think this might be causing it?
I do not want to have to do a hard reset every could of weeks.
This is a joke. Any help is greatly appreciated. Thanks.
hgalanos said:
Hey guys,
I have a HD2 with the following stats:
WM: 6.5
Manilla: 2.5.19211619.0
ROM: 1.66.405.2
Radio: 2.06.51.07
My phone works perfectly. Out of nowhere, without having installed any new apps, without a soft reset, nothing at all.
When I click on any quicklink, or any app under the start menu, I get the following error:
"The file ?????? cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found. If the problem persists try reinstalling or restorig the file"
??????? = the app or program I am trying to run.
This stops sense from loading. Only WM6.5 will run - without HTC sense.
I get this error for no reason. I have not installed any new software, I have not done a soft reset, nothing. Was using the phone all day and it was perfect. Then bang, I got this.
It has happened before and a hardware reset fixed it.
Does anyone know what on earth is causing it? I have SKcert and Cert2015 installed as I am using some custom icons. Do you think this might be causing it?
I do not want to have to do a hard reset every could of weeks.
This is a joke. Any help is greatly appreciated. Thanks.
Click to expand...
Click to collapse
Could be something to do with your SD card....
Have you got a link to something installed on your internal memory you can test...
I had somekind of sense failure once when I took the sd card while the phone was on and no matter what I tried I couldnt get it running....
I might be way off but Its all I can think of Im afraid.....
Re-install framework 3.5...
Had the same issue. first on a kaiser, and recently on my hd2....... what i did was reinstall the .net framework, ie first un install, then re install, and soft reset..... workd perfect.
i see this is an old post, but might come in handy any way.
acerulzall said:
Had the same issue. first on a kaiser, and recently on my hd2....... what i did was reinstall the .net framework, ie first un install, then re install, and soft reset..... workd perfect.
i see this is an old post, but might come in handy any way.
Click to expand...
Click to collapse
I have the same problem. can not reinstall anything - "not signed" any other solutions??
Regarding sdcard - it do the same with non stock programs, which are running on internal storage, when there is no SD card inside.
It happened after unsuccessful run of android from SD card
any solutions??
uta77 said:
I have the same problem. can not reinstall anything - "not signed" any other solutions??
Regarding sdcard - it do the same with non stock programs, which are running on internal storage, when there is no SD card inside.
It happened after unsuccessful run of android from SD card
any solutions??
Click to expand...
Click to collapse
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
1) Download following file: http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
From archive we need only SDA_ApplicationUnlock.exe
It allows Registry to be edited from PC.
Run it with working Activesync connection
2) Download Mobile Registry Editor: http://www.zipsoft.ru/catalog/mobile_registry_editor-v1_11.html
Also run with working Activesync connection
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
FYI, here are some other useful software packages that relax the security.
http://forum.xda-developers.com/showthread.php?t=285344
http://www.internet-tools.co.uk/blog...tegory/mobile/
http://www.internet-tools.co.uk/blog...sda_unlock.zip
http://sedacka.saman-cz.com/ppc/inde...unlocking.html
http://forum.xda-developers.com/showthread.php?t=338433 --- the first file in this article.
4) Restart
P.S. Special THANKS to JZ SmartMort
uta77 said:
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
4) Restart
P.S. Special THANKS to JZ SmartMort
Click to expand...
Click to collapse
Could you please explain to me what each of these policies values do, or maybe point me to the thread where I could find out?
I am able to install apps ok, but every time I install a cab, it gives me the
"This application is not from a certified/trusted source, yada yada yada"
message, and I have to choose 'yes' to confirm it and go ahead with the install, not a huge deal but it'd be nice to get around it if some of these will do it.
And when I reboot, especially from Android to WM, alot of the time I get an error from gAlarmReload.exe , even though it doesn't affect gAlarm at all, the alarms still work fine. I just wanna make the s/w security as lax as possible on my phone.
I guess I'm already app unlocked, because I can make registry changes no problem. I have installed sdkcerts and netcf3.5, and have done the reg change to ensure the phone is using 3.5 and not 2.whatever_it_is, among many other reg changes.
But I don't like to go changing reg values if I don't understand what they do, because I'm one of those set-everything-up-manually types, I don't like the backup prog's and I've done a bunch of tweaks already so a HR would kill me...
Thanks for reading my unneccessarily long post, I have Asperger's so I tend to overexplain everything to death, but I guess at least I'm thorough
Thanks, worked perfect on my wife's HD2, as she needs to run stock rom 3.14.
This saved me heaps of figuring out how to do this.
Once again,thanks to all those who try and help on this forum.
Where would be all be without such great contributions !
Thank you.
uta77 said:
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
1) Download following file: http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
From archive we need only SDA_ApplicationUnlock.exe
It allows Registry to be edited from PC.
Run it with working Activesync connection
2) Download Mobile Registry Editor: http://www.zipsoft.ru/catalog/mobile_registry_editor-v1_11.html
Also run with working Activesync connection
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
FYI, here are some other useful software packages that relax the security.
http://forum.xda-developers.com/showthread.php?t=285344
http://www.internet-tools.co.uk/blog...tegory/mobile/
http://www.internet-tools.co.uk/blog...sda_unlock.zip
http://sedacka.saman-cz.com/ppc/inde...unlocking.html
http://forum.xda-developers.com/showthread.php?t=338433 --- the first file in this article.
4) Restart
P.S. Special THANKS to JZ SmartMort
Click to expand...
Click to collapse
after using sec config manager...i cannot sync with outlook by USB also wifi account exhange not working any help?
set back the original registry values
i have same problem with certification. And i have done with the registry values. but after a week, my phone goes slowly than ever.
I want change my registry value to normal. if any, would you please help me to write the original values of registry? i am using HTC touch pro 2 Rod 400 from US Cellular. Thank you.