Related
I'd like to connect the headset that came with my Wizard to my laptop so I can listen to streaming audio. Beats carrying two sets of headphones around with me. I cannot find such an adapter.
Does anyone know of a source for a four-conductor 2.5mm jack (female)? If I had one, I could make my own adapter.
You can listen to streaming audio on your Wizard. Works fine via wifi on mine, but if you're connecting to a wired network you'll need the adapter.
Anyway, you may not need a 4-conductor female jack to adapt to your notebook. The adapters I'm using to go from the phone to some Shure earbuds with a conventional 3.5mm 3-conductor jack is a 3-conductor male jack going into the Wizard's 4-conductor female. It works fine, but I'm not sure why. The crux is that you may be able to use a 3-conductor male to fit into your 2.5mm 4-conductor earbuds. Keep in mind I was moving in the opposite direction, adapting 3.5mm headphones to the 2.5mm Wizard jack.
Not all work, however, as I went to Radio Shack and tried some 3.5-to-2.5mm adapters and they didn't work (one channel only). Thus, since you may not find any adapters that specify they'll work with a Wizard, you may need to use the trial-and-error technique. The problem is that there are several standards for the 4-conductor jacks, and what works with one may not work with another. I bought adapters that specified they worked with this phone. You might do an Ebay search on the seller "Manyui" and email him about what you're trying to do. He sells all types of adapters on Ebay.
You can listen to streaming audio on your Wizard. Works fine via wifi on mine, but if you're connecting to a wired network you'll need the adapter.
Anyway, you may not need a 4-conductor female jack to adapt to your notebook. The adapters I'm using to go from the phone to some Shure earbuds with a conventional 3.5mm 3-conductor jack is a 3-conductor male jack going into the Wizard's 4-conductor female. It works fine, but I'm not sure why. The crux is that you may be able to use a 3-conductor male to fit into your 2.5mm 4-conductor earbuds. Keep in mind I was moving in the opposite direction, adapting 3.5mm headphones to the 2.5mm Wizard jack.
Not all work, however, as I went to Radio Shack and tried some 3.5-to-2.5mm adapters and they didn't work (one channel only). Thus, since you may not find any adapters that specify they'll work with a Wizard, you may need to use the trial-and-error technique. The problem is that there are several standards for the 4-conductor jacks, and what works with one may not work with another. I bought adapters that specified they worked with this phone. You might do an Ebay search on the seller "Manyui" and email him about what you're trying to do. He sells all types of adapters on Ebay.
Check out this site
I found the connector you were looking for (cause I too want to do the same thing) - 2.5 mm 4 pole female jack
http://www.remtrak.com/psu/jack.htm
I also found a headset pinout (for nokia) and could you let me know if the connections are same for the xda headset jack?
http://pinouts.ru/CellularPhones-Nokia/nokia_headset_pinout.shtml
Adio adapter
Try these guys.
http://www.pocketpctechs.com/main~unit~Cingular_8125-559~area~accessories-audio.htm
I use the adapter with the mic in my 01 MDX. Have it going to an old Sony Walkman Cassette adapter. It works awesome for Audio through the stereo as well as hands free. No feed back and people have no issues hearing me. Can turn the audio up on the stere as loud as i can stand it.
Not the solution that we're looking for
Hey anothersmith,
I want to use the Wizard headset on the laptop, not the other way round as its easier to have the connector conected to the laptop than carry it around with the headset. Moreover, the headset that came with the Wizard is cool so I want to keep using it!
Thanks for the help!
China rocks
Hi,
Im sorry, but paying £3.04 for a plug is just a little to much for me.
You might want to consider this: http://cgi.ebay.com/Oasis-music-ada...7686197QQihZ016QQcategoryZ15040QQcmdZViewItem
Oasis music adaptor, www.shope2.com.
Im using one of this on my car, i plug this on my cingular 8125, and i have a Jack 3.5mm stereo, in which i plug my cassette adaptor and listen music in my stereo.
It also has a button for picking up calls when they arrive, and a mic built in which works really fine.
Or if you really want the plug, cut the cable, use a multimeter and you are all set.
I wonder why no one seems to get the point!
Thanks China Rocks, but you too are getting it wrong! I DO NOT want to use my xda to play music on my stereo. I want to connect my xda earphones (that have a 2.5 mm male jack) to the headphone + mic sockets of my laptop so that I can use it to listen to music or talk on the laptop.
xda earphone (headset/headphone) 2.5 mm male jack ---> Laptop audio + mic out connector 3.5 mm female jack
Will somebody get the point!
Need 2.5mm 4 conductor female socket
Reading this thread is painful. I too am looking for a 4 conductor 2.5mm female socket so that I can make an adapter to plug some Shure I4C-T's into the headphone and microphone 3.5mm sockets on my laptop. The source in the UK charges a lot of shipping to the US. Anyone know of a US supplier of 2.5mm female sockets?
Radioshack USA finally has it!
http://www.radioshack.com/product/index.jsp?productId=2603246
Wrong again!
Hi xoom!
That's not what we are looking for! What your adaptor does is connect a stereo headphone with a 3.5 mm male jack to my xda that has a 2.5 mm female jack.
What I am looking for is an adaptor that will connect my "xda headset with mic" (forget about the xda, it's not in the equation here) that has a "2.5 mm female jack" to my "laptop" that has a "3.5 mm female jack" (Female to Female adaptor).
Illustrating this fact:
"XDA HEADSET with MIC" (Female 2.5 mm jack) <--> "LAPTOP AUDIO & MIC OUT" (Female 3.5 mm jacks)
Thanks for your attention!
This?
http://cgi.ebay.com/2-5mm-to-3-5mm-...ryZ88763QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
iclick said:
You can listen to streaming audio on your Wizard. Works fine via wifi on mine, but if you're connecting to a wired network you'll need the adapter.
Anyway, you may not need a 4-conductor female jack to adapt to your notebook. The adapters I'm using to go from the phone to some Shure earbuds with a conventional 3.5mm 3-conductor jack is a 3-conductor male jack going into the Wizard's 4-conductor female. It works fine, but I'm not sure why. The crux is that you may be able to use a 3-conductor male to fit into your 2.5mm 4-conductor earbuds. Keep in mind I was moving in the opposite direction, adapting 3.5mm headphones to the 2.5mm Wizard jack.
Not all work, however, as I went to Radio Shack and tried some 3.5-to-2.5mm adapters and they didn't work (one channel only). Thus, since you may not find any adapters that specify they'll work with a Wizard, you may need to use the trial-and-error technique. The problem is that there are several standards for the 4-conductor jacks, and what works with one may not work with another. I bought adapters that specified they worked with this phone. You might do an Ebay search on the seller "Manyui" and email him about what you're trying to do. He sells all types of adapters on Ebay.
Click to expand...
Click to collapse
I used one of those Rat Shack adapters with my wizard and had no problems at all. If you're only getting one channel then it sounds like it is either not far enough in or too far in (i'm guessing the former though). That or you didn't purchase the correct adapter. The only time I had a problem with only getting one channel was when I purchased a mono adapter by mistake. I've also got some other adapters that I have purchased locally for < $5 that work fine. They're not especially pretty but I haven't had problems with any of them. I would be more than happy to purchase one for somebody and send it to them for the price of the adapter and shipping. I can even ship it overnight for around $6.
I will try to make it to the same supplier and see if they don't have the 2.5mm jack or adapter that you're looking for. I'm thinking that they do, though.
Gotcha!
Hey Poiygon,
Thats the thing! Thanks!
Cheers!
2.5mm 4 pole parts
FYI I found 2.5mm 4pole connectors and jacks at "mouser.com". see p/n's 171-7425 or 161-6425-EX which should get you to the area of related parts. I'm using thes for my Siemens SX66 to a motorcycle head set and mic. Hope this helps anyone.
sincerely,
phil
Adapter
Pocketpctechs.com has what you need
Has any crufted an adapter that allows the use of normal 2.5mm cell-phone headsets to work with a TyTN. I like the fidelity of my awesome Plantronics headset, and I want to get it to work with the TyTN. Any luck?
Thanks,
-Humbert
Have you tried buying one from this site.
http://shop.brando.com.hk/htcstereoconverter.php
I just received mine last week and it works great, MUCH better than the stock headset.
Alan.
Edit: "Sorry mis-read the topic, this is to a std 3.5mm headset jack."
aw000002 said:
Have you tried buying one from this site.
http://shop.brando.com.hk/htcstereoconverter.php
I just received mine last week and it works great, MUCH better than the stock headset.
Alan.
Edit: "Sorry mis-read the topic, this is to a std 3.5mm headset jack."
Click to expand...
Click to collapse
Not a problem, but thanks for the referral and review anyway. I will probably go ahead and order one of those, too, but really, I just want a wired headset.
Thanks,
-Humbert
No... I've been searching high and low. I've got a pair of Shure headphones that are amazing and have the 2.5mm 3-pole connector that works perfectly with my HTC Magician... I'd love an adaptor to just run them with my Tytn, but so far no luck.
Currently, I'm using a 3.5 adaptor and then another adaptor to the ExtUSB connector, so I've got no mic capability and two dodgy connectors between my 100 GBP headphones and my phone!!!
I'm going to take my Shures to an electronics guy and have him swap the connector eventually.
I found the following mini-USB to 2.5mm adapter for the Motorola phones.
http://www.theboom.com/adaptors.html
Anyone know if its compatible with the HTC mini-USB implementation?
kcchen said:
I found the following mini-USB to 2.5mm adapter for the Motorola phones.
http://www.theboom.com/adaptors.html
Anyone know if its compatible with the HTC mini-USB implementation?
Click to expand...
Click to collapse
Nope, it wont work.
this is where our stores get their accy's from, you can get allot of good stuff here.
http://superiorcommunications.com/products/products.aspx
if you have a bussiness/Tax/reseller liscense (mispelled) then you can buy from here.
With the risk of a "me too" post, a 2.5mm converter would be worth money to me. I have yet to find one anywhere and am about to buy an extra headset and start "experimenting" and who know where that will lead. Probably to a new phone.
I emailed HTC America and got this reply...
Hello Michael and thank you for contacting HTC America. Unfortunately we do not make any accessories other than what is included with the device. There are some 3rd party vendors that do offer this accessory however; they are not affiliated with HTC. Please see the following link for one of them:
http://www.cell-phone-accessories.com/emu-headset-adapter.html.
Thanks,
HTC Support
I have one on order. I'll let you know if it works.
Michael
Hope?
Hi Michael --
Please let us know if this does work. This would be a great fall-back adaptor to use if/when my BT headset runs out of juice.
Thanks,
-Humbert
I just finished my request to HTC support. These devices do NOT work. No audio what so ever. I tried regular audio as well as the audio of a call. Nothing-nada. The adapter is stamped as "Motorola" on the back. Apparently the HTC version of the USB plug is not the standard "EMU" version that everyone else is using.
Michael
Ugh, why didn't they just add a standard 3.5mm headphone jack? That would have made everyone's lives a lot easier.
I just bought the Motorola adapter, ended up wasting $5 (not a lot, I know, but hey, it's money).
Maybe I should try for a refund...
If anyone knows any adapters that work with the Hermes/TyTN, I would love to know.
Well, I finally found an option that will work for me. My motorcycle has a 2.5mm plug for hooking a cell phone into the intercom system (it's a gold wing) It also has a 3.5mm plug for an aux device to the stereo. I got the moto hf820 from amazon for around $45. It is a bluetooth hands free device, but it also has a 2.5mm plug on it. So, the phone section of my 8525 now connects to the bluetooth 820 into the intercom through it's 2.5mm plug. For the rest of the audio, I am using one of the extusb to 3.5mm adapters. That way I'll be able to get my gps directions over the stereo. That is a long way around to do it, but the 820 seems to work out pretty well as a 2.5mm adapter.
MSHampton said:
Well, I finally found an option that will work for me. My motorcycle has a 2.5mm plug for hooking a cell phone into the intercom system (it's a gold wing) It also has a 3.5mm plug for an aux device to the stereo. I got the moto hf820 from amazon for around $45. It is a bluetooth hands free device, but it also has a 2.5mm plug on it. So, the phone section of my 8525 now connects to the bluetooth 820 into the intercom through it's 2.5mm plug. For the rest of the audio, I am using one of the extusb to 3.5mm adapters. That way I'll be able to get my gps directions over the stereo. That is a long way around to do it, but the 820 seems to work out pretty well as a 2.5mm adapter.
Click to expand...
Click to collapse
Holy ****, what a rube goldberg device!!!! But, I like your ingenuity. I ride myself (BMW GS) and so I just may try to cobble together something similar to yours...
However, most people want the wired headset so that they don't have to rely upon bluetooth. I want a fall-back headset.
To be honest, I found the perfect BT headset, and so I'm not sure if I need a wired connection anymore. I bought a jawbone and have been using it for 2 months. I like it so much, I bought a *second* one for when I run down the batteries on the first one, I can just use that one. Sure, it costs me $120 a pop, but after using 6 different bluetooth headsets over the last few years, this is the first one where people can't tell that I'm on a headset. Yes, it's that good.
-Humbert
HHumbert said:
Holy ****, what a rube goldberg device!!!! But, I like your ingenuity. I ride myself (BMW GS) and so I just may try to cobble together something similar to yours...
Click to expand...
Click to collapse
That it is! I have the Kennedy CellSet (www.cellset.com) on my goldwing that integrates the cell phone as if it is a 3rd party on the intercom. Makes it kind of nice because either me or my wife can take a call while we are riding if needed. Anyway, I had the adapter for a 2.5mm plug and they don't make an adapter for the extusb of the HTC so hey, this works. Not only that, the GPS audio and the phone audio are on two different channels on the bike now. Worked out pretty good.
Hi there!
I'm interested in that problem too. So is there an adapter what is working, and tested yet?
If not, maybe we should try to cut down one ExtUSB to 3,5mm adapter and cut down the 2,5 mm side of the headset, and then maybe it can be built together, and we have a headset, with ExtUSB port.
Is it a possible way? Maybe any alternatives? God I'll be really happy if we can do something to do with this
Could always try this
www.tracyandmatt.co.uk/blogs/index.php/2006/08/18/orange_spv_m3100_headphone_adapter_hack
Massiv
2.5 and 3.5 fix for USB
I too have an expensive Shure headset with a 2.5 connector that I used on my Cingular 8125. I just moved to a Cingular 8525 e/w the ExtUSB connector.
I have been working with the tech support guys at Shure and we have sort of a fix. My Shure headset has a Mic so it needs a 4 conductor cable and the corresponding 4 wire jacks to carry voice to the handset. BIG issue. None of the current connectors (Ext USB to 2.5 or 3.5) carry the 4th wire! They will carry audio out over the 3 wires. . . stupid I guess.
So Mobile Planet and others now have a TyTN (Titan) Cingular 8525 cable adapter that is made by ORA and has its own mic, and answer/hangup control and ends in a 3.5 jack for a headset (3 wire). This means that if you have a 2.5 jack on your headset you need another adapter to reduce the 3.5 to a 2.5 (+/- $10.00 US).
Then you use the mic in the adapter. This is a real mickey mouse rig but it works and you do not have to buy another very expensive headset. You just cannot use the mic in your expensive headset! The cable is also a little long since the adapter's cable is about 20".
If you are thinking of buying a good wired headset then use the ORA adapter (Shure is about to come out with one also) and a standard Shure 3.5 headset like the SE series ($150+) which has a shorter cable. The two work nicely together. It is what I am using now. see link below:
(http://www.shure.com/PersonalAudio/Products/Earphones/SEModels/index.htm)
but they really really work well . . . and are worth the $$s
However, does anyone know if the HTC P3350 W100 Wired Remote Control(http://www.mobileplanet.com/p.aspx?i=145859) will work on an Cingular 8525?
2.5mm adapter for 8525
http://store.pchcables.com/spmoppxvat85.html
I ordered one and it works perfect. About $8 with shipping.
Rosbif22 said:
http://store.pchcables.com/spmoppxvat85.html
I ordered one and it works perfect. About $8 with shipping.
Click to expand...
Click to collapse
I'm interested in something like this. It says it works with three-connector 2.5mm jacks. Does this mean stereo headphones or mono headphones+mic? I want to have phone conversations so hopefully mono+mic.
Thanks!
I'm looking for an adapter for my Cingular 8525 that allows me to plug in a plain ole 2.5mm headset that I've come to love.
I've seen plenty of adapters for sale that allows one to use normal stereo earplugs with the TyTN, such as on http://www.doml.net/productdec.asp?pid=2698&model=HTC_TyTN&modeln=TyTN
The pinout seems to be Pinout from Tracy and Matt's blog
Should I, perhaps, just bust open the crappy Cingular headset and do some soldering? Will the impedence for the microphone be the same? How should I combine the stereo that they have in the crappy headset to the mono that all 2.5mm jacks use?
Thanks!
-Humbert
workable, but not great
I used the same pinout to add a 3.5mm jack to the original headset end. The problem is the wires used in the cable are very difficult to solder. They are more like a metallized fabric than plain copper wire. And I am pretty good with fine wire soldering in general.
That said, I did get the jack on (though I'm not thrilled with the non-flowed solder joints) but the output level is pretty low. If I plug it into the input jack on my car stereo, the GSM phone noise (which I *hate*) overwhelms the wired signal every time I change towers.
Bill
Can anyone recommend a site that sells a Mini-USB to 3.5mm Adapter for my Wizard and ships internationally? I usually buy these types of accessories at Brando, but some reason I cant find it on their site.
Thanks
No such thing -- the Wizard has a 2.5 mm 4-conductor jack for headset/microphone. The Wizard's USB connector is just for charge/sync; no audio signals available.
3waygeek said:
No such thing -- the Wizard has a 2.5 mm 4-conductor jack for headset/microphone. The Wizard's USB connector is just for charge/sync; no audio signals available.
Click to expand...
Click to collapse
OK, thanks
sorry wrong place
i got a 2.5 to 3.5 at radio shack for 3 bucks
but now thanks to zoki and nbd i can use my bluetooth headphones with a2dp
can someone please confirm this? like himalaya's handsfree can be used on alpine perfectly
I believe that all htc phones with 2.5mm minijack are
at least i used my wallaby headset with my himalaya
heck i used the cradle too so that connector is pinout identical too
oic...
1 more thing, there's supposed to be output when normal 3-conductor stereo 2.5mm jack is plugged into alpine's 2.5mm 4-conductor jack right?
I recently bought an alpine set without handsfree, then I went on & bought 2.5mm -> 3.5mm jack converter but I hear no sound on earphone having it plugged in, I've shaved the plastic & made sure the jack is inserted fully I dun have a stock handsfree to test with... could be the jack's fault? wuuuu T.T
I used both a org htc converter and a noname with my himalaya and they both did the job