Related
I'd like to connect the headset that came with my Wizard to my laptop so I can listen to streaming audio. Beats carrying two sets of headphones around with me. I cannot find such an adapter.
Does anyone know of a source for a four-conductor 2.5mm jack (female)? If I had one, I could make my own adapter.
You can listen to streaming audio on your Wizard. Works fine via wifi on mine, but if you're connecting to a wired network you'll need the adapter.
Anyway, you may not need a 4-conductor female jack to adapt to your notebook. The adapters I'm using to go from the phone to some Shure earbuds with a conventional 3.5mm 3-conductor jack is a 3-conductor male jack going into the Wizard's 4-conductor female. It works fine, but I'm not sure why. The crux is that you may be able to use a 3-conductor male to fit into your 2.5mm 4-conductor earbuds. Keep in mind I was moving in the opposite direction, adapting 3.5mm headphones to the 2.5mm Wizard jack.
Not all work, however, as I went to Radio Shack and tried some 3.5-to-2.5mm adapters and they didn't work (one channel only). Thus, since you may not find any adapters that specify they'll work with a Wizard, you may need to use the trial-and-error technique. The problem is that there are several standards for the 4-conductor jacks, and what works with one may not work with another. I bought adapters that specified they worked with this phone. You might do an Ebay search on the seller "Manyui" and email him about what you're trying to do. He sells all types of adapters on Ebay.
You can listen to streaming audio on your Wizard. Works fine via wifi on mine, but if you're connecting to a wired network you'll need the adapter.
Anyway, you may not need a 4-conductor female jack to adapt to your notebook. The adapters I'm using to go from the phone to some Shure earbuds with a conventional 3.5mm 3-conductor jack is a 3-conductor male jack going into the Wizard's 4-conductor female. It works fine, but I'm not sure why. The crux is that you may be able to use a 3-conductor male to fit into your 2.5mm 4-conductor earbuds. Keep in mind I was moving in the opposite direction, adapting 3.5mm headphones to the 2.5mm Wizard jack.
Not all work, however, as I went to Radio Shack and tried some 3.5-to-2.5mm adapters and they didn't work (one channel only). Thus, since you may not find any adapters that specify they'll work with a Wizard, you may need to use the trial-and-error technique. The problem is that there are several standards for the 4-conductor jacks, and what works with one may not work with another. I bought adapters that specified they worked with this phone. You might do an Ebay search on the seller "Manyui" and email him about what you're trying to do. He sells all types of adapters on Ebay.
Check out this site
I found the connector you were looking for (cause I too want to do the same thing) - 2.5 mm 4 pole female jack
http://www.remtrak.com/psu/jack.htm
I also found a headset pinout (for nokia) and could you let me know if the connections are same for the xda headset jack?
http://pinouts.ru/CellularPhones-Nokia/nokia_headset_pinout.shtml
Adio adapter
Try these guys.
http://www.pocketpctechs.com/main~unit~Cingular_8125-559~area~accessories-audio.htm
I use the adapter with the mic in my 01 MDX. Have it going to an old Sony Walkman Cassette adapter. It works awesome for Audio through the stereo as well as hands free. No feed back and people have no issues hearing me. Can turn the audio up on the stere as loud as i can stand it.
Not the solution that we're looking for
Hey anothersmith,
I want to use the Wizard headset on the laptop, not the other way round as its easier to have the connector conected to the laptop than carry it around with the headset. Moreover, the headset that came with the Wizard is cool so I want to keep using it!
Thanks for the help!
China rocks
Hi,
Im sorry, but paying £3.04 for a plug is just a little to much for me.
You might want to consider this: http://cgi.ebay.com/Oasis-music-ada...7686197QQihZ016QQcategoryZ15040QQcmdZViewItem
Oasis music adaptor, www.shope2.com.
Im using one of this on my car, i plug this on my cingular 8125, and i have a Jack 3.5mm stereo, in which i plug my cassette adaptor and listen music in my stereo.
It also has a button for picking up calls when they arrive, and a mic built in which works really fine.
Or if you really want the plug, cut the cable, use a multimeter and you are all set.
I wonder why no one seems to get the point!
Thanks China Rocks, but you too are getting it wrong! I DO NOT want to use my xda to play music on my stereo. I want to connect my xda earphones (that have a 2.5 mm male jack) to the headphone + mic sockets of my laptop so that I can use it to listen to music or talk on the laptop.
xda earphone (headset/headphone) 2.5 mm male jack ---> Laptop audio + mic out connector 3.5 mm female jack
Will somebody get the point!
Need 2.5mm 4 conductor female socket
Reading this thread is painful. I too am looking for a 4 conductor 2.5mm female socket so that I can make an adapter to plug some Shure I4C-T's into the headphone and microphone 3.5mm sockets on my laptop. The source in the UK charges a lot of shipping to the US. Anyone know of a US supplier of 2.5mm female sockets?
Radioshack USA finally has it!
http://www.radioshack.com/product/index.jsp?productId=2603246
Wrong again!
Hi xoom!
That's not what we are looking for! What your adaptor does is connect a stereo headphone with a 3.5 mm male jack to my xda that has a 2.5 mm female jack.
What I am looking for is an adaptor that will connect my "xda headset with mic" (forget about the xda, it's not in the equation here) that has a "2.5 mm female jack" to my "laptop" that has a "3.5 mm female jack" (Female to Female adaptor).
Illustrating this fact:
"XDA HEADSET with MIC" (Female 2.5 mm jack) <--> "LAPTOP AUDIO & MIC OUT" (Female 3.5 mm jacks)
Thanks for your attention!
This?
http://cgi.ebay.com/2-5mm-to-3-5mm-...ryZ88763QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
iclick said:
You can listen to streaming audio on your Wizard. Works fine via wifi on mine, but if you're connecting to a wired network you'll need the adapter.
Anyway, you may not need a 4-conductor female jack to adapt to your notebook. The adapters I'm using to go from the phone to some Shure earbuds with a conventional 3.5mm 3-conductor jack is a 3-conductor male jack going into the Wizard's 4-conductor female. It works fine, but I'm not sure why. The crux is that you may be able to use a 3-conductor male to fit into your 2.5mm 4-conductor earbuds. Keep in mind I was moving in the opposite direction, adapting 3.5mm headphones to the 2.5mm Wizard jack.
Not all work, however, as I went to Radio Shack and tried some 3.5-to-2.5mm adapters and they didn't work (one channel only). Thus, since you may not find any adapters that specify they'll work with a Wizard, you may need to use the trial-and-error technique. The problem is that there are several standards for the 4-conductor jacks, and what works with one may not work with another. I bought adapters that specified they worked with this phone. You might do an Ebay search on the seller "Manyui" and email him about what you're trying to do. He sells all types of adapters on Ebay.
Click to expand...
Click to collapse
I used one of those Rat Shack adapters with my wizard and had no problems at all. If you're only getting one channel then it sounds like it is either not far enough in or too far in (i'm guessing the former though). That or you didn't purchase the correct adapter. The only time I had a problem with only getting one channel was when I purchased a mono adapter by mistake. I've also got some other adapters that I have purchased locally for < $5 that work fine. They're not especially pretty but I haven't had problems with any of them. I would be more than happy to purchase one for somebody and send it to them for the price of the adapter and shipping. I can even ship it overnight for around $6.
I will try to make it to the same supplier and see if they don't have the 2.5mm jack or adapter that you're looking for. I'm thinking that they do, though.
Gotcha!
Hey Poiygon,
Thats the thing! Thanks!
Cheers!
2.5mm 4 pole parts
FYI I found 2.5mm 4pole connectors and jacks at "mouser.com". see p/n's 171-7425 or 161-6425-EX which should get you to the area of related parts. I'm using thes for my Siemens SX66 to a motorcycle head set and mic. Hope this helps anyone.
sincerely,
phil
Adapter
Pocketpctechs.com has what you need
I ordered a 2.5mm to 3.5mm adaptor for my 8125 and they sent me a mini Usb to 3.5mm headphone jack. Upon plugging it in with headphones, it doesn't work and the audio comes out of the 8125's speakers. Is there any way to make this work or should I demand they send me the correct product? Thanks in advance.
Interesting username :wink:
What time was it when you placed your order.
Did you really think that the phone would route audio through mini usb.
Send it back and get the correct minijack adaptor.
Thanks for the reply. :wink:
They're already sending me the right one, and they said that I can keep the other one. (Not really helpful since I already had and broke a Razr) I've been wanting to use my Wizard in the car with an fm transmitter because my cd player is awful so I wasn't sure if there was any way to use the Razr adaptor in the meantime. I didn't think so, but it was worth at least posting about it.
haxish420 said:
I ordered a 2.5mm to 3.5mm adaptor for my 8125 and the retards sent me a mini Usb to 3.5mm headphone jack. Upon plugging it in with headphones, it doesn't work and the audio comes out of the 8125's speakers. Is there any way to make this work or should I demand they send me the correct product? Thanks in advance.
Click to expand...
Click to collapse
Where did you order the 2.5 - 3.5mm adapter from? Is it a special adapter...or could I get one from Radio shack? The reason i ask is that my MPX200 needed a special adapter, the radio shack unit didn't work. Thanks!
[quote="anothersmith]Where did you order the 2.5 - 3.5mm adapter from? Is it a special adapter...or could I get one from Radio shack? The reason i ask is that my MPX200 needed a special adapter, the radio shack unit didn't work. Thanks![/quote]
RadioShack sells them.
Geoffrey
I'm actually going to go to radioshack myself. I finally received the "correct" item that I ordered on eBay, and the sound only comes out of the left earphone unless my headphones are half unplugged.
go here
http://www.pocketpctechs.com/main~unit~Cingular_8125-559~area~accessories~item~PPCPADPT11.htm
I ordered one and it works correctly. You might get one at radio shack, if the pinouts on the rings are correct, which they probably are not. That is why you had to have it "halfway unplugged."
jimmyhauser said:
go here
http://www.pocketpctechs.com/main~unit~Cingular_8125-559~area~accessories~item~PPCPADPT11.htm
I ordered one and it works correctly. You might get one at radio shack, if the pinouts on the rings are correct, which they probably are not. That is why you had to have it "halfway unplugged."
Click to expand...
Click to collapse
I do believe the one I bought from RadioShack works fine.
Geoffrey
A buddy gave me one that he used on his Treo, it's "L" shapped and works nicely. I think I'm gonna get the one from Pocket PC Techs that has the built in Mic and answer button...then my half ass hands free will be complete. I'm connecting an old Sony Discman tape player adapter to my 8125...actually sounds ok but I hate all the wires. A FM Bluetooth adapter would be nice.
jimmyhauser said:
go here
http://www.pocketpctechs.com/main~unit~Cingular_8125-559~area~accessories~item~PPCPADPT11.htm
I ordered one and it works correctly. You might get one at radio shack, if the pinouts on the rings are correct, which they probably are not. That is why you had to have it "halfway unplugged."
Click to expand...
Click to collapse
what a rip off, $20 something shipped for a little $5 adapter?
haxish420 said:
I ordered a 2.5mm to 3.5mm adaptor for my 8125 and the retards sent me a mini Usb to 3.5mm headphone jack. Upon plugging it in with headphones, it doesn't work and the audio comes out of the 8125's speakers. Is there any way to make this work or should I demand they send me the correct product? Thanks in advance.
Click to expand...
Click to collapse
you need to inform the seller for a replacement
USB to 3.5mm adaptor works ONLY with moto phones
I bought an adapter (L-shaped) with earbuds packed together for Ipaqs at Comp USA today for 14.95. I already have the one from Radio Shack but it's a straight adaptor and pretty big (I thought) for what it is. I lke the L-shaped much better.
can you put a picture up of what u got
Has any crufted an adapter that allows the use of normal 2.5mm cell-phone headsets to work with a TyTN. I like the fidelity of my awesome Plantronics headset, and I want to get it to work with the TyTN. Any luck?
Thanks,
-Humbert
Have you tried buying one from this site.
http://shop.brando.com.hk/htcstereoconverter.php
I just received mine last week and it works great, MUCH better than the stock headset.
Alan.
Edit: "Sorry mis-read the topic, this is to a std 3.5mm headset jack."
aw000002 said:
Have you tried buying one from this site.
http://shop.brando.com.hk/htcstereoconverter.php
I just received mine last week and it works great, MUCH better than the stock headset.
Alan.
Edit: "Sorry mis-read the topic, this is to a std 3.5mm headset jack."
Click to expand...
Click to collapse
Not a problem, but thanks for the referral and review anyway. I will probably go ahead and order one of those, too, but really, I just want a wired headset.
Thanks,
-Humbert
No... I've been searching high and low. I've got a pair of Shure headphones that are amazing and have the 2.5mm 3-pole connector that works perfectly with my HTC Magician... I'd love an adaptor to just run them with my Tytn, but so far no luck.
Currently, I'm using a 3.5 adaptor and then another adaptor to the ExtUSB connector, so I've got no mic capability and two dodgy connectors between my 100 GBP headphones and my phone!!!
I'm going to take my Shures to an electronics guy and have him swap the connector eventually.
I found the following mini-USB to 2.5mm adapter for the Motorola phones.
http://www.theboom.com/adaptors.html
Anyone know if its compatible with the HTC mini-USB implementation?
kcchen said:
I found the following mini-USB to 2.5mm adapter for the Motorola phones.
http://www.theboom.com/adaptors.html
Anyone know if its compatible with the HTC mini-USB implementation?
Click to expand...
Click to collapse
Nope, it wont work.
this is where our stores get their accy's from, you can get allot of good stuff here.
http://superiorcommunications.com/products/products.aspx
if you have a bussiness/Tax/reseller liscense (mispelled) then you can buy from here.
With the risk of a "me too" post, a 2.5mm converter would be worth money to me. I have yet to find one anywhere and am about to buy an extra headset and start "experimenting" and who know where that will lead. Probably to a new phone.
I emailed HTC America and got this reply...
Hello Michael and thank you for contacting HTC America. Unfortunately we do not make any accessories other than what is included with the device. There are some 3rd party vendors that do offer this accessory however; they are not affiliated with HTC. Please see the following link for one of them:
http://www.cell-phone-accessories.com/emu-headset-adapter.html.
Thanks,
HTC Support
I have one on order. I'll let you know if it works.
Michael
Hope?
Hi Michael --
Please let us know if this does work. This would be a great fall-back adaptor to use if/when my BT headset runs out of juice.
Thanks,
-Humbert
I just finished my request to HTC support. These devices do NOT work. No audio what so ever. I tried regular audio as well as the audio of a call. Nothing-nada. The adapter is stamped as "Motorola" on the back. Apparently the HTC version of the USB plug is not the standard "EMU" version that everyone else is using.
Michael
Ugh, why didn't they just add a standard 3.5mm headphone jack? That would have made everyone's lives a lot easier.
I just bought the Motorola adapter, ended up wasting $5 (not a lot, I know, but hey, it's money).
Maybe I should try for a refund...
If anyone knows any adapters that work with the Hermes/TyTN, I would love to know.
Well, I finally found an option that will work for me. My motorcycle has a 2.5mm plug for hooking a cell phone into the intercom system (it's a gold wing) It also has a 3.5mm plug for an aux device to the stereo. I got the moto hf820 from amazon for around $45. It is a bluetooth hands free device, but it also has a 2.5mm plug on it. So, the phone section of my 8525 now connects to the bluetooth 820 into the intercom through it's 2.5mm plug. For the rest of the audio, I am using one of the extusb to 3.5mm adapters. That way I'll be able to get my gps directions over the stereo. That is a long way around to do it, but the 820 seems to work out pretty well as a 2.5mm adapter.
MSHampton said:
Well, I finally found an option that will work for me. My motorcycle has a 2.5mm plug for hooking a cell phone into the intercom system (it's a gold wing) It also has a 3.5mm plug for an aux device to the stereo. I got the moto hf820 from amazon for around $45. It is a bluetooth hands free device, but it also has a 2.5mm plug on it. So, the phone section of my 8525 now connects to the bluetooth 820 into the intercom through it's 2.5mm plug. For the rest of the audio, I am using one of the extusb to 3.5mm adapters. That way I'll be able to get my gps directions over the stereo. That is a long way around to do it, but the 820 seems to work out pretty well as a 2.5mm adapter.
Click to expand...
Click to collapse
Holy ****, what a rube goldberg device!!!! But, I like your ingenuity. I ride myself (BMW GS) and so I just may try to cobble together something similar to yours...
However, most people want the wired headset so that they don't have to rely upon bluetooth. I want a fall-back headset.
To be honest, I found the perfect BT headset, and so I'm not sure if I need a wired connection anymore. I bought a jawbone and have been using it for 2 months. I like it so much, I bought a *second* one for when I run down the batteries on the first one, I can just use that one. Sure, it costs me $120 a pop, but after using 6 different bluetooth headsets over the last few years, this is the first one where people can't tell that I'm on a headset. Yes, it's that good.
-Humbert
HHumbert said:
Holy ****, what a rube goldberg device!!!! But, I like your ingenuity. I ride myself (BMW GS) and so I just may try to cobble together something similar to yours...
Click to expand...
Click to collapse
That it is! I have the Kennedy CellSet (www.cellset.com) on my goldwing that integrates the cell phone as if it is a 3rd party on the intercom. Makes it kind of nice because either me or my wife can take a call while we are riding if needed. Anyway, I had the adapter for a 2.5mm plug and they don't make an adapter for the extusb of the HTC so hey, this works. Not only that, the GPS audio and the phone audio are on two different channels on the bike now. Worked out pretty good.
Hi there!
I'm interested in that problem too. So is there an adapter what is working, and tested yet?
If not, maybe we should try to cut down one ExtUSB to 3,5mm adapter and cut down the 2,5 mm side of the headset, and then maybe it can be built together, and we have a headset, with ExtUSB port.
Is it a possible way? Maybe any alternatives? God I'll be really happy if we can do something to do with this
Could always try this
www.tracyandmatt.co.uk/blogs/index.php/2006/08/18/orange_spv_m3100_headphone_adapter_hack
Massiv
2.5 and 3.5 fix for USB
I too have an expensive Shure headset with a 2.5 connector that I used on my Cingular 8125. I just moved to a Cingular 8525 e/w the ExtUSB connector.
I have been working with the tech support guys at Shure and we have sort of a fix. My Shure headset has a Mic so it needs a 4 conductor cable and the corresponding 4 wire jacks to carry voice to the handset. BIG issue. None of the current connectors (Ext USB to 2.5 or 3.5) carry the 4th wire! They will carry audio out over the 3 wires. . . stupid I guess.
So Mobile Planet and others now have a TyTN (Titan) Cingular 8525 cable adapter that is made by ORA and has its own mic, and answer/hangup control and ends in a 3.5 jack for a headset (3 wire). This means that if you have a 2.5 jack on your headset you need another adapter to reduce the 3.5 to a 2.5 (+/- $10.00 US).
Then you use the mic in the adapter. This is a real mickey mouse rig but it works and you do not have to buy another very expensive headset. You just cannot use the mic in your expensive headset! The cable is also a little long since the adapter's cable is about 20".
If you are thinking of buying a good wired headset then use the ORA adapter (Shure is about to come out with one also) and a standard Shure 3.5 headset like the SE series ($150+) which has a shorter cable. The two work nicely together. It is what I am using now. see link below:
(http://www.shure.com/PersonalAudio/Products/Earphones/SEModels/index.htm)
but they really really work well . . . and are worth the $$s
However, does anyone know if the HTC P3350 W100 Wired Remote Control(http://www.mobileplanet.com/p.aspx?i=145859) will work on an Cingular 8525?
2.5mm adapter for 8525
http://store.pchcables.com/spmoppxvat85.html
I ordered one and it works perfect. About $8 with shipping.
Rosbif22 said:
http://store.pchcables.com/spmoppxvat85.html
I ordered one and it works perfect. About $8 with shipping.
Click to expand...
Click to collapse
I'm interested in something like this. It says it works with three-connector 2.5mm jacks. Does this mean stereo headphones or mono headphones+mic? I want to have phone conversations so hopefully mono+mic.
Thanks!
Has anyone used a 2.5mm handsfree FM for the Wizard? Trying to look for one, but they all seem to be for other phones rather than the Wizard. Thanks.
Adapter
Are you refering to the little port for the headset/heaphones? If so I was able to find an adapter 2.5mm to standard 3.5mm to listen to any standard headphone set. I found it on ebay for like $2.00 + shipping. I hope I was able to help.
I was wondering if a iphone headset could work with the topaz, if so can you use it with a 3.5 adapter. much appreciated
kevintsai said:
I was wondering if a iphone headset could work with the topaz, if so can you use it with a 3.5 adapter. much appreciated
Click to expand...
Click to collapse
Yes it will (assuming it is just a 3.5mm jack), but you will need to get an adapter for the Topaz as this only has an 11-pin socket. See http://www.amazon.com/T-Mobile-Stereo-Headphone-L-Shaped-Adapter/dp/B000RU8YKG or google "11 pin to 3.5mm adapter".
thanks so much
thanks alot man haha im still totally new to this topaz 2. yea i got a 3.5 adapter here in taiwan its pretty awesome works very well. now i just need to find a 3.5 headphone that works do you think
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4522485&CatId=2381
this would work in theory right
Headsets
Original HTC:
Find more info here:
http://www.htcaccessorystore.com/nl/p_htc_phone.aspx?i=179082
I use this one it comes from my stolen HTC Touch 3G:
http://www.htcaccessorystore.com/nl/p_htc_item.aspx?i=179247
To use any third party headset with 3,5 mm jack:
This is a nice 11 pin to 3,5 mm jack adaptor with answer button and microfone:
http://www.pdashop.nl/product/66788/65941/3361/htc-usb-to-audio-adaptor-ac-a110.html
Another one:
http://www.pdashop.nl/product/41081/65941/3361/veripart-handsfree-headset-converter-htc-extusb.html
Simple 11 pin to 3,5 mm jack adaptor:
http://www.pdashop.nl/product/41080/65941/3361/veripart-standard-headset-converter-htc-extusb.html
3 in 1 adaptor:
http://www.pdashop.nl/product/41082/65941/3361/veripart-3-in-1-converter-htc-extusb.html