i am trying to connect my O2 ATOM with active sync to my desktop pc via usb but it is not connecting my active syns window is showing connecting message from 1/2 hour I just bought it last nite PLs HELP
yasinjagral said:
i am trying to connect my O2 ATOM with active sync to my desktop pc via usb but it is not connecting my active syns window is showing connecting message from 1/2 hour I just bought it last nite PLs HELP
Click to expand...
Click to collapse
have u downloaded drivers already ? If not download drivers first install it restart the PC and than try to connect ,,,
i got the solution
actually it was all firewall settings mistake thanks for replying buddy
Related
Hello,
I just bought a QTEK 1010 i think it is the same as XDA. I tried to install active sync that came on the CD - it installed fine. but it does not locate the device for some reason. I am connecting the cradle using USB. I have tried removing the active sync software and plugging in the USB cable, windows XP picks the cradle up so im sure nothing is wrong with the cradle. please help me as to why active sync does not find the device. and what i can do about it .
thanks
Have you looked at your pc activesync settings and ensured that the option for usb connection is enabled?
Latest version of ActiveSync
You might want to try downloading the latest version of ActiveSync because I had a similar problem. Installing version 3.7.1 resolved it.
http://www.microsoft.com/windowsmobile/default.mspx
anyone get the error message of unknown device when plugging in their wm 6 phone to a laptop, happens to me on vista homepremium and xp, both up to date. this happens about %50 of the time
I bet your USB port on the laptop is not supplying enough current (borderline, hence why it works sometimes). Try one of the following things, first try the connection while the laptop is on AC power (not internal battery). Second, do you have a double USB port adapter? This is a cable that plugs into your external USB device on one end, and has a Y-connector that plugs into 2 USB ports on your laptop, thus increasing the current capability. If either one of these suggestions solves the problem then it means the laptop is not able to supply enough current on one USB port, a common problem.
I had the same problem and found it to be a firewall issue
Ofcourse it could be a firewall issue or any issues with loading of drivers and services. A soft-reset on the device and a PC Restart will solve most of the case!
Regards,
Carty..
How would a PC Restart make your firewall accessible, I located the SmcGui.exe (symantec) created a shortcute, and use that to disable to firewall whenever I want to connect
paulnoise said:
anyone get the error message of unknown device when plugging in their wm 6 phone to a laptop, happens to me on vista homepremium and xp, both up to date. this happens about %50 of the time
Click to expand...
Click to collapse
hi guys thanks for the advice, however, i have since updated to vista ultimate and now get the following issues. xp seems to have sorted itsself out, however vista has problems installing the drivers for my phone. it says on the phone check usb cable and on the laptiop i get the symbol in the sys tray for unrecognised device. the phone will sync fine, just not allow internet sharing.(i am using a 2.0 usb port and my mobile device centre is up to date, i downloaded all the vista updates today)
my firewall has been turned off, but i believe its a driver issue as thats whats showing on the screen device not recognised.
any ideas?
For Internet Sharing in Vista, you need to install WMDC.
http://www.microsoft.com/windowsmobile/devicecenter.mspx
i have it installed, i tried changing from official rom to black satin and a few others and it still does the same. the mobile device centre will sync then i turn on the internet sharing and it installs the drivers for "unknown device". had a word with the t-mobile connectivity team who took a look at the laptop and phone, tried it on other laptops with the same result. vista doesn't like the internet sharing bit. tried the usual stuff like taking off the advanced network functionality etc.
oke here is what u gotta do :
for windows vista:
-reboot computer without wm6 device connected
-install mobile device center 6.1 (the drivers ^^)
-reboot
-wipe all activesync connections on wm6 device and vista
-disconnect device and see if advanced networking is enabled (USB to PC .. in networksettings wm6)
-set connectionssettings in mobile device center from automatic to Internet
-goto networksettings on wm6 device and choose connections
-tap advanced and select networks : both set to My ISP
-connect wm6 device and wait till it finished .. take some minute or so
installing drivers and things
-when its done unplug device and reboot computer (yes again, and i am not
going to explain why this is so important as you should know by now)
-wait for the computer to boot untill it finished (vista this take 2 minute at least)
-connect wm6 device and setup proper sync partnership
-goto connectionsettings in mobile device center and check all boxes and set it to internet if it is not allready set.
-wait for the device to do its stuff
-it will strangely reconnect after a while and internet works again
notes:
kaspersky 7 : -turn of the kaspersky protocol on the networkadapter of wm6
-allow acces to svhost when it asks for it.
norton 360: -no problem found .. maybe you need add LSP to trusted
networks
internet+wmdc 6.1
double post ...
moderator remove this please
hey dajojo yer guide is great , i tried it and unfortunately, it connected for about 30 seconds and went straight back to usb device not recognised.
when it was connecting it should show up as "generic rndis internet sharing windows mobile device" or something similar.
any further assistance would be great.
m running vista home premium 32 bit (went back to it from ultimate)
Finally Solved!
Hi there!
Seems to be the same problem on HTC Dual!
try this
go to start>settings>system>power>advanced
if the checkbox "When device is turned on, do not charge battery when connected to PC" is checked uncheck it and tap ok! Then go back again and check the checkbox again and tap ok again. and the ActiveSync software will sync all data!
Hey everybody,
I'm new to this flashing as well...
I have a Tmobile US HTC HD2...
I installed the HSPL3 after getting the Windows Mobile Device Center...
It was installed successfully, but after that whenever I connect my HTC to my PC, I can hear the ding but my PC is not recognizing my device and there is no connected icon on the HTC as well.
I tried all the USB ports and nothing worked. Without connecting my device to the PC you know you can't flash any roms as well...
Any help please...
sureshkgopalan said:
Hey everybody,
I'm new to this flashing as well...
I have a Tmobile US HTC HD2...
I installed the HSPL3 after getting the Windows Mobile Device Center...
It was installed successfully, but after that whenever I connect my HTC to my PC, I can hear the ding but my PC is not recognizing my device and there is no connected icon on the HTC as well.
I tried all the USB ports and nothing worked. Without connecting my device to the PC you know you can't flash any roms as well...
Any help please...
Click to expand...
Click to collapse
Are you trying to do this while your screen has the three colors?
If so....does it say USB at the bottom or serial?
not while bootlegger mode. I used that for installing the hspl3.
my pc didn't discover the connected device and there was no connected symbol (which you get on your hd2 on the top right side, next to 3G n/w symbol).
when I connect, it shows that as a mass storage device on my pc and the safely remove hardware sign shows up.
I hope this explains my problem.
settings menu all settings connections usb to pc tick active sync untick 'faster data' reboot the pc, reboot the phone. Should be fine.
Thanks Sam, it worked. Unticking the 'faster data', did the trick...
Thanks again.
hi
i recently got hd2 t moble running kumar's leo premium rom v2.6 wwe.
problem is that i cant synchronise it with the laptop. message appers "usp device not recognised" but phone gets charged while connected to laptop.
i m having windows 7 and windows mobile device centre running in my computer.
pls somebody help me correct this issue.
thanks.
Update win mo dev center from the Microsoft wmdc webpage.
samsamuel said:
Update win mo dev center from the Microsoft wmdc webpage.
Click to expand...
Click to collapse
hi,
thanks for the response. i have already tried these,
1. changed the cable and tried different ports of the computer
2. hard resetting the phone
3. uninstalled and reinstalled the wmdc
4. restarted laptop while phone is connected and vice versa
5. connected phone in bootloader mode. it said "serial". no change after connecting
phone.
6. checked with different computers
nothing worked. still it says "usb device not recognised"
what else can i do?
would a new rom flash via the micro sd help? my hd2 already has the custom rom installed. so i guess no need to install hspl.
:crying: i have hp laptop with windows 8.1 enteprise after install windows 8.1 enterprise all goes well my sola can connect fastboot flashmode and also mass storage but suddenely i cant connnect it via as maas storage(flashmode,fastboot) its show only charging plsss help me guysss:crying:
no idea for win 8.1 , but you can try this.
http://forum.xda-developers.com/showthread.php?t=2095087
it is probably a driver problem and generally happens in win8/8.1, when you perform updates in windows.
NOTE : make sure that you are not trying to connect the phone to usb 3.0 or above, the last time i checked, our phones does not support such connection.
--------------------
if you have flashed some ROM, and it changes the device id, like LT27i to LT27a ( check it in settings ), then installing proper drivers of flashtool might correct your problem.
rim01126 said:
:crying: i have hp laptop with windows 8.1 enteprise after install windows 8.1 enterprise all goes well my sola can connect fastboot flashmode and also mass storage but suddenely i cant connnect it via as maas storage(flashmode,fastboot) its show only charging plsss help me guysss:crying:
Click to expand...
Click to collapse
i tried it all but i remember week ago i use duplicate charger then it short circuit and second day when i connect my mobile in pc its not recognize only charging show
plssss helplppp me guys:crying:
try connecting your phone with win xp/7 pc ( any friend's or neighbor's ). if the device is not recognized as a peripheral even once in any and all of the pc, then you should get the usb port checked. lets hope everything is all right !
connect your phone in xp/7 and look for any drivers installing notification in task bar.
if not, go to device manager and look for the device in all usb ports the pc has.
i suggest you to try this in 2 computers. if any one has ubuntu ( or any other linux distro ), you can try that too.
rim01126 said:
i tried it all but i remember week ago i use duplicate charger then it short circuit and second day when i connect my mobile in pc its not recognize only charging show
plssss helplppp me guys:crying:
Click to expand...
Click to collapse
thnkx bro but already try its but no result only charging start when i connect my sola in pc i think i fried my charging port and bootloader plssa give me any procedure for fix this problem and my sola is now running carbon rom cm11 but i wanna go to ics then i want help plss help me and sorry for my bad English