...not a valid Win32 application - 8525, TyTN, MDA Vario II, JasJam Software Upgradin

Hi,
I'm trying to make my Vodafone 1605 VPA SuperCID, but when I run HERM_Unlock_v2a.exe I get a Windows error ...not a valid Win32 application.
I'm guessing this is something to do with my laptop hardware because I've had a problem loading other software due to the Due chip (Dell Latitude D820 - Centrino Duo etc).
Any advice appreciated - but be gentle with me 'cos I'm new to upgrading Windows mobile.

You actually copy that file onto your phone and run it from there, not the computer.
That should do the trick!

Thanks for quick reply - it shows how much I've got to learn!!!
Ran the file from my phone and got the "SUCCESS" message but when I checked using mtty.exe the phone still reports locked to vodafone.
I'll have a play and see what I come up with - hopefully not frying the phone in the process

ach2 said:
Ran the file from my phone and got the "SUCCESS" message but when I checked using mtty.exe the phone still reports locked to vodafone.
Click to expand...
Click to collapse
You _must_ be running the unlocker's patched radio 1.16 on your phone when you run HERM_Unlock_v2a.exe, otherwise it will report "SUCCESS" but do nothing.

Thanks Pof, but I don't know what to do next...
my bootloader screen shows IPL-1.00 and SPL-1.04.
My device info shows:
ROM version: 1.20.161.6
ROM date: 08/02/06
Radio version: 1.03.06.00
Protocol version: 32.34.7010.01W
I've read most of the WIKI (and even understood most of it) and also as many posts to this forum as I could.
Also, the 'available ROMs' page shows that this is the only ROM that Vodafone UK have produced and, bacause another poster has done the same thing with the same hardware and ROM I guessed I shouldn't have too much problem.
I think that as a beginner I must be doing something wrong or misunderstanding some of the lingo but would appreciate any more help which will get me away from the Vodafone ROM - and who knows, as I learn I may even be able to help some others later
Cheers, and thanks for all the informative posts

ach2 said:
my bootloader screen shows IPL-1.00 and SPL-1.04.
Radio version: 1.03.06.00
Click to expand...
Click to collapse
Follow instructions here, after flashing patched rom your radio version should show 1.16, then run HERM_Unlock_v2a.exe on your phone and wait the "success" message. After that you should be SuperCID, if not, read the unlocking thread... it has all been answered before.

OK, finally worked it out - all I had to do was RTFW - ALL of it, not just the parts I think are relevant.
Cheers for the help, I'm sure I'll screw up later and need more lelp but I've learned loads already...
Now trying to work out which ROM to use (except Vodafone) and hoping not to brick the phone in the process )

Related

HELP!!! Country Error, Tried everything can't upgrade

I want to upgreade my ROM, but I keep on getting a country error, i've tried doingt he coutntry code hack, but it still gives me the same error!
Help me please?
ROM version : 1.60.00WWE
Rom Date : 12/03/03
Radio version : 1.06.01
Protocol Version : 1337.16
ExtROM version : 1.60.06
Help would be greatly appreciated.
Thanks in advance
Uh, i would really need someone to show me how to do it, I'm still very new at this.. thanks
I found that the instructions on the wiki, using itsme's tools work for me. ER2003edit doesn't reliably change the country code for me.
Remember to pick the right country code for your device, and to re-encrypt the files.
wfberg said:
I found that the instructions on the wiki, using itsme's tools work for me. ER2003edit doesn't reliably change the country code for me.
Remember to pick the right country code for your device, and to re-encrypt the files.
Click to expand...
Click to collapse
It's me? Where do I find it?
Now I am in trouble
I tried upgrading it, I thought it worked now it's stuck in bootloader mode...
Please help me!
i tried upgrading it, the country error is back and my unit keeps on displaying Serial 1.02
HElp!
See if it says "USB" when it's in the cradle (with the computer on, etc.)
Then, just run the upgrade again.
Remember though, flashing ROMs is dangerous.
wfberg said:
See if it says "USB" when it's in the cradle (with the computer on, etc.)
Then, just run the upgrade again.
Remember though, flashing ROMs is dangerous.
Click to expand...
Click to collapse
Now you tell me
Anyway, I finally got it working, I will be more careful in falshing ROMs in the future...
Thanksfor all your help
Deadman said:
wfberg said:
See if it says "USB" when it's in the cradle (with the computer on, etc.)
Then, just run the upgrade again.
Remember though, flashing ROMs is dangerous.
Click to expand...
Click to collapse
Now you tell me
Click to expand...
Click to collapse
I wised up and put that piece of information in my signature ;-)

HTC HERMES (M3100) - fatal crash, PLEASE HELP!

Hi,
I recently had a power cut (yes, a lights off power cut!) that killed my PC half wat through installing the Cingular English CWS__001 1.34.502.1 09/21/06 ?? 1.16.00.00 32.53.7018.01H 14955.2.3.0 ROM onto my SPV 3100.
Now SPV 3100 will boot to the ROM I was running prior to the upgrade but I can't use the telephone. I'm also not able to rerun the upgrade as it got far enough through the process to upgrade my bootloader to 1.06 - therefor rendering me unable to load another ROM.
Before the crash I was using the Imate ROM as below and M3100 was sim unlocked and running on o2 3G
i-mate English CDL__001 1.20.305.3 07/21/06 1.20.305.104 1.07.03.10 32.41.7010.02H 14955.2.3.0 1.04
Please help.
Thanks
If your device is still working ok as a PDA then hopefully it just screwed up the radio update of your device.
Try reflashing the Radio only
Look Here
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Post back with results
Regards
S.K
EDIT: Sorry only works on 1.04 bootloader only. Afraid your gonna have to wait for Pof to come up with a 1.06-1.04 workaround
Hi S.K,
Thanks for the info. I have now tried installing the HERM_1.20.31.10_type2_radio_fixed upgrade but unfortunately the radio upgarde crashes also. It all seams to go well, (after using MaUpgradeUt_noID.exe twice) the phone says "Upgrade Radio Stack Please wait" and the progress bar appears on the PC but then after 10 mins I get an ERROR 114: RADIO ROM UPDATE ERROR.
Do you think this might be becuase the last upgarde partly installed bootloader 1.06?
Any other suggestions - I'm desperate to get the hpone on M3100 working again.
Thanks
Read here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
Please post USB monitor capture, otherwise can't help u.
Hi Pof,
Thanks for the offer, I will sort out the usb software on Monday. Are there specific actions that I should try, obvioosly I will usb monior everthing I do but I want to keep it to the point and not waist yr time trailing through huge log files.
Cheers
BTW - I have tried all options of recovery, such as attempting to install the latest radio and trying to install the new rom from an sd card, trying several roms and using imei unlocker - all without any joy.
I think the problem is that I have partially installed radio and bootloader 1.06 so I can't fix the problem.
Thanks again.
@wotthefok:
For me is faster to look at the usb log file, then I exactly know why the upgrade fails, otherwise I have to decode it from your feedback and I can't be really sure. Check the "upgrading problems" page on the wiki, if none of the steps there seems to fix your problem, post USB monitor log please.
Log Files as requested
Hi,
I have captured information using usb monitor and attached the zipped log files for your attention.
The first is called USB_monitor_log_Herm_120Radio_twice. This log details attempting to install the HERM_1.20.31.10_type2_radio_fixed upgrade, and running it twice - just in case.
The USB_monitor_log_runing_Cingular_1.34.502_11_uprgrade_twice.zip details attempting to install the RUU_HER_Cingular_1.34.502.1_1.16.00.00_wwe_cws_ship upgrade, simply using the standard ROMUpgradeUt.exe method. This generates the expected Vendor ID error.
My primary focus is to install the radio upgare or download my bootloader to 1.04. The PDA part of my m3100 does now freeze occasionally but at least functions whereas the phone is completely dead.
Thanks in advance.
Please attach capture in *ANSI TEXT FORMAT*, the .lgs file you zipped is totally unuseful
Edit -> Export and Save as type "ANSI Text files".
Also make sure you export in "COMPLETE" view, see the wiki for more details.
OK, Spot the novice.... I have now created a txt log file that captures activity of me running the 120 Radio upgarde - but only once this time. I still had to zip the file due to it's size. Hope this is OK.
I'll send the other logs within the next couple of hours. Please let me know if the output I have sent so far is acceptable?
Thanks
wotthefok said:
Please let me know if the output I have sent so far is acceptable?
Click to expand...
Click to collapse
No, it's a "basic" capture, you have to export a "complete" capture:
Start USBMonitor.
File -> New session -> USB Monitor -> Select USB device where your phone is connected -> Check "request view" -> Finish
In the upper part there are two tabs: basic and complete. Click on "Complete".
Right, Try again (duh!) OK, I've tried to keep the log files names as self-explanitory as possible... USB_monitor_log_Herm_120Radio_run1.zip is the r20 radio upgrade, 1st run and USB_monitor_log_Herm_120Radio_run2.zip the second run - without disconneting or resetting the device.
USB_monitor_log_runing_Cingular_1.34.502_11_uprgrade_ran_twice.zip is the Cingular upgrade run via the ROMUpgradeUt.exe, again run twice without disconneting the device.
Hope I got it right this time.....Please let me know if there is anything else I can do.
Thanks.
This time you got the captures right
- You're on bootloader 1.06: You don't have 'rtask' command, you won't be able to do any radio upgrade only.
- Your device is not CID unlocked (Security level=FF, unprivileged)
- The bad flash caused the CID area to corrupt (CID: Wait interpreter timeout)
- When flashing a full ROM you get a CID not allow (255) this is because your corrupted CID doesn't match the CID on the ROM.
The radio part is screwed, you could have fixed this if you where in bootloader 1.04 by flashing a full ROM, but as you are in 1.06 you can't because of CID checking. But you're lucky because the OS ROM is intact and you can boot the OS, you should be able to downgrade to bootloader 1.04 from OS and flash a full ROM after, which will hopefully fix your radio.
Just wait until a solution to downgrade bootloader is available (I'm working on it).
Hi,
As I suspected.... Suppose it's not all bad news though - just means that I have to be patient and use my communicator once more. Do you know if the guys at IMEI-CHECK have a downgrade solution? Even if it's a pay for option??
I have already got a IMEI-CHECK sim unlock from where I originally got the M3100 unlocked from Orange to work on o2. That said, I have run either unlocker 2 or 3 with the .unl that I know worked I now get
HTC HERMES v3c unlock
Starting communication.........
Checking device..............ERROR
The device you try to unlock is not supported.
Please contact your supplier site.
Device is rebooting
Press any key to quit this application.
I'm currently chatting to the guys at IMEI-CHECK re this problem.
Anything else I can do to assist you in anyway??
Cheers
wotthefok said:
Do you know if the guys at IMEI-CHECK have a downgrade solution? Even if it's a pay for option??
Click to expand...
Click to collapse
They have it (M3100v3cUnlock.exe), but it will not work on your device because your IMEI is corrupted and their unlocker will not be able to read it and to check/compare with the .unl key file.
Hi,
Just a quick update. The guys at MIGsofT LTD have VERY VERY generously said they'll have a look at the problem for me so my phone will be winging it's way to them today.
Thanks for your assistance and helping me be certain of the problem and to better understand the root cause.
Hope this information will prove useful to others.
Another quick update...
The guys at IMEI-CHECK (MIGsofT LTD) have rectified problems with my handset and managing to reinstall bootloader 1.04 in the process!!
They also turned my phone around in under three days and only charged me the cost of postage! I had previously been a customer of theirs but it was still a very generous and helpful offer and I would certainly pay for the service than have a duff handset - after all £250 + for a paperweight is rather excessive....
If you're experiencing a problem like mine why not get in touch with them and offer them money to have a look at your handset? No Guarantees but it seemed like my last chance, for a while anyway.
Praise to IMEI-CHECK for a brilliant service - they are King of the day !!

PROBLEM! After installing "XDA Live" ROM, I can't install ANY other!

Hey guys.
Yes, I'm new here, but not new to phones or computers by any means - trust me.
In any case, what happened was I downloaded the XDA Live version of Windows Mobile 6 for my Hermes (originally Rogers branded) and installed it.
Then, I discovered the actual forum here, and saw Schaps' version of WM6 pro and I want that badly. Regardless of which version I'm trying to upgrade to, I get the same issue.
Here it is:
When I connect the phone normally with ActiveSync and try to upgrade to Schaps' ROM (or Dutty's, or the official one, or the T-Mobile one, or the Qtek one, anything), I get a 260 error saying that my USB cable isn't properly connected. Now I've seen and tried the fixes for that error with no luck. The other error I occasionally get is one saying that my device code isn't correct or something or other. And another one is that my image file is corrupt and that I should check my update utility.
What do I do?
ANY HELP would be greatly appreciated!
Thanks in advance!
P.S. My bootloader version is 1.11 (I think) as per the following screen during bootloader:
HERM200
IPL-1.01
(The following part is in yellow below the above part)
HERM200
IPL-1.11
I had the same problem.
I then upgraded the boot loader with hard-SPL:
http://forum.xda-developers.com/showthread.php?t=296722
Now it's working fine and I can load any ROM.
Cheers
Pat
I successfully upgraded to SPL-1.10, with the same result (no change).
I'm really unsure of what's going on with this...but I really need to upgrade to Schaps' TouchFLO ROM - and should be able to easily...
When you upgrade the rom, chose hard-spl (safe).
Good luck
Patric

Radio Upgrade Help

Hi I know its been asked for number of times but I can't find the correct answer for this.
I wish to upgrade my radio version to ATT latest radio (HERM_Radinly_1.54.07.00). I have it downloaded from wiki and trying to follow the instruction.
1. Extracted HERM_Radinly_1.54.07.00_CustomRUU.rar.
2. Disabled Active Sync.
3. Entered in Bootloader. Phone connected to machine. Its in USB mode now.
4. Now when I run RUUWrapper.exe, I get a screen where I have to make some selection. And here I need some help. There are following options,
a.SPL 1.01 MFG Bootloader
b.SPL 1.04/1.10 SPL 1.09 Bootloader
c.SPL 1.11/1.13/1/30/1.35/1.40 Bootloader
d.SPL 2.02/2.10 New Bootloader
b. Force Using SSPL
Check Box for Is HardSPL?
Now if some one can help me to find out correct option in the list, I can move further. My current SPL and IPL are in my signature. As far as I remember I have HardSPL done too.
Any help will be really appreciated.
Thanks -nbhor
nbhor said:
Hi I know its been asked for number of times but I can't find the correct answer for this.
I wish to upgrade my radio version to ATT latest radio (HERM_Radinly_1.54.07.00). I have it downloaded from wiki and trying to follow the instruction.
1. Extracted HERM_Radinly_1.54.07.00_CustomRUU.rar.
2. Disabled Active Sync.
3. Entered in Bootloader. Phone connected to machine. Its in USB mode now.
4. Now when I run RUUWrapper.exe, I get a screen where I have to make some selection. And here I need some help. There are following options,
a.SPL 1.01 MFG Bootloader
b.SPL 1.04/1.10 SPL 1.09 Bootloader
c.SPL 1.11/1.13/1/30/1.35/1.40 Bootloader
d.SPL 2.02/2.10 New Bootloader
b. Force Using SSPL
Check Box for Is HardSPL?
Now if some one can help me to find out correct option in the list, I can move further. My current SPL and IPL are in my signature. As far as I remember I have HardSPL done too.
Any help will be really appreciated.
Thanks -nbhor
Click to expand...
Click to collapse
You are right, this has been asked a number of time... . May i suggest another method to load your rom?: SD card. You do not need to use a USB connection (no risk to loose it) nor a PC and it works perfectly.
1> format a sdcard in FAT32 (use a card of max 2GB)
2> copy the .nbh file to it (Preferably the only file on the card)
3> rename the file: HERMIMG.NBH
4> insert the card and push: OK-POWER-SOFT RESET (to go to the 3 colors screen). It will detect your hermimg file (says "loading" in blue) and describe the content
5> follow instructions on screen.
And that's it ! Just note that flashing a radio rom is slow. This means that you will have the impression that it stops time to time. Just be patient
Oh... by the way, having tried nearly all radios available, 1.47 is for me the best compromize between battery drain and performances (at least in my area). But, once again, this is a matter of taste. Make your religion
Thanks a lot. Actually I have followed the same process while upgrading from WM5 to vp 3G's WM6. But I was not aware that I can use same process to upgrade the radio only. And to my surprise it worked like a charm. Appreciate your help in this matter. I will update you with my experience on this radio version.
Thanks -nbhor
Hi Guys,
I am having the usual radio issues atm, no version showing etc.
I have gone through the wiki and read the thread by POF on the issue and tried flashing a half a million times (ok maybe not but you know what I mean :-0)
So here is my issue now, I would love to try flasing via SD but mine just won't do it, doesn't even ask a damn thing once in bootloader, just sits there.
I am running 2.10.olipro loader and IPL 1.04, should this work for doing radio updates or any updates off the SD card? I can read it fine and copy dump to it from both PC and PDA and I have tried to working cards aswell. Any ideas?
Cheers Glenn
Ps I just noted that nbhor is running exactly what I am running and it worked ok for him - WTF?
terminatermule said:
Hi Guys,
I am having the usual radio issues atm, no version showing etc.
I have gone through the wiki and read the thread by POF on the issue and tried flashing a half a million times (ok maybe not but you know what I mean :-0)
So here is my issue now, I would love to try flasing via SD but mine just won't do it, doesn't even ask a damn thing once in bootloader, just sits there.
I am running 2.10.olipro loader and IPL 1.04, should this work for doing radio updates or any updates off the SD card? I can read it fine and copy dump to it from both PC and PDA and I have tried to working cards aswell. Any ideas?
Cheers Glenn
Ps I just noted that nbhor is running exactly what I am running and it worked ok for him - WTF?
Click to expand...
Click to collapse
As far as you can still flash, the method explained above should work
terminatermule said:
Hi Guys,
I am having the usual radio issues atm, no version showing etc.
I have gone through the wiki and read the thread by POF on the issue and tried flashing a half a million times (ok maybe not but you know what I mean :-0)
So here is my issue now, I would love to try flasing via SD but mine just won't do it, doesn't even ask a damn thing once in bootloader, just sits there.
I am running 2.10.olipro loader and IPL 1.04, should this work for doing radio updates or any updates off the SD card? I can read it fine and copy dump to it from both PC and PDA and I have tried to working cards aswell. Any ideas?
Cheers Glenn
Ps I just noted that nbhor is running exactly what I am running and it worked ok for him - WTF?
Click to expand...
Click to collapse
Hi Glenn this happened with me for couple of times too. Didn't ask anything in boot loader.Then I went back to board and did as this thread says http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing and this helped. May be this will help you too. All the best.
Thanks -nbhor
Hi nbhor,
Thanks for that, I had read that thread but not stressed much about preparing the cards, a format and error check (which ti my amazment found bad sectors on two brand new transflash cards sorted it and it now tries to flash but still fails unfortunately. Oh well looks like no radio for me again :-(
Cheers Glenn

Posted In Wrong Category. Moderator, Please Erase This One

Hi,
I have a Tilt, the ROM version is: 1.57.502.2, Radio version: 1.27.12.11. I am trying to downgrade the phone to WM5 or to one of the cooked roms published on this site. I have spent hours reading the WIKI section and many posts. I have tried to install the HARD-SPL however in the begining I had the white screen problem. After using the JUMPSPL, I think that I have managed to install the Hard-SPL (The version that the bootloader shows is: SPL-1.0.Olipof.
I have also unlocked the phone and the CID using tools available on this website. I have no way to check if the unlock works since I do not have another SIM with me right now.
The problem that I am having is that every time I try to install a ROM, I start the upgrade wizard, and get to the point where the phone shows a promt that asks me if I want to approve the execution of a file. I confirm it and then the phone reboots, shows the AT&T logo right away and reloads everything. I do not see the bootloader and after around 60 seconds I get the 260 error on my computer telling me that there is an update error and that the update utility could not access my PDA phone.
I have also tried to get into the bootloader manually, then connect the USB while ActiveSync is open and load an ATT rom (It's an older one with WM5 provided by Cingular) however I get the same results...
Can anyone give me some guidance? Any advice will be greatly appreciated!!!
Thanks,
Joe
P.S. The computer's OS is windows XP, I have turned of the Anti-Virus Scanner (AVG)
FYI this section is for the Hermes/8525, you need to check out the Kaiser/8925/tilt section of this site.
Sorry
Sorry, my mistake. I can't delete my first message however I will change the subject so the moderator will erase it.
Thanks,
Joe

Categories

Resources