Hi, I've upgrade from the Moto (920/925/1000) phones on the 3Aus network and while I've done lots of upgrading on these platforms I'm a NOOB on the Dopod.
I've read the FAQ and searched the forums and the wealth of info makes the Symbion stuff look tiny....so any advice from 3Aus users on what ROM (or other) upgrade is the go would be terrific. I've got the latest official release and updates flashed already from the DopodAsia site but notice that:
1) I don't have the "band" tab
2) the inbuild voice navigation is utterly terrible (at least for on Oz accent)
Thanks
Nathan
nathan im from OZ and have modified my Dopod... but i really insist on reading the wiki first before you make any changes and you are awake of its consequences if anything was to fail...
Thanks - I've read the Wiki and would look at upgrading during the W'End (so I am not rushed). Just wanted to hear some feedback from a "local"!
Nathan
no worries.... i suggest you read this first before you do any changes http://forum.xda-developers.com/showthread.php?t=294012&page=1
mate, I'd look at walshie's sig for some hints
I'm waiting for the x-series in aus to be available before I sign on and get a dopod 838pro as well. So I'm interested in following this thread.
Hi Nathan,
I'm a Three user, based in Melbourne but in Newcastle a fair bit too, and I've flashed my Dopod to the latest HTC AKU3.3 test ROM, including the radio update. Make sure you use the unlocker/superCID first . I'm getting great reception with this latest radio ROM, and the OS is nice and fast too.
You'll have to put the settings for 3Services (thats whats used for the Three website, and email) and the 3MMS settings back in, but its not too hard.
As far as voice recognition, MS Voice Command 1.6 with the fixes from the thread in the "Hermes" forum works fine with an Aussie accent.
Thanks - I've chosen at this stage to stick with ROM Version 1.30.707.4 but flashed SuperCID and upgrade to Radio Version 1.27.00.00 (GER). So far so good!
Good to hear! I'd still reccomend running AKU3.3 test though - its really a great upgrade! I'm a heavy user of mine and its not let me down as often as 1.30.707.4 did.
Out of interest, did you get the reply to the email you sent me? Sometimes Hotmail puts my domain in the junk mail box, just curious to know if it got through OK.
Thanks Kevin, I'm actually re-flashing as we speak as I found that after the SuperSID & Radio upgrade to 1.27 my Dopod "froze" several times today when the screen was off requiring a soft reset.
Couple of Q's:
1) Do I need to re SuperSID after flashing with "RUU_Hermes_HTC_WWE_2.05.255.1_6275_1.34.00.10_108_Test" (is this AKU3.3)?
2) Do you know what are the "3 Australia Settings" I need to re-enter
Thanks
Nathan
PS It was not me on any e-mail!
with the latest flash your installing, is internal GPS enabled??
jmone said:
2) Do you know what are the "3 Australia Settings" I need to re-enter?
Click to expand...
Click to collapse
(coss post with Aussie3G)
I've got Phone / External Web / SMS working fine, but am having trouble with the MMS setting and e-mail - i've entered the following info for the WAP account manually - any ideas for "Three in Australia"?
Server Name: 3MMS
Gateway: 10.176.57.25
Port#: 8799
Server Address: three.net.au:10021/mmsc
Connection Via: The WAP Network
Sending size limitations: 300kb
Wap Version: WAP 2.0
Thanks
Nathan
OK got the settings going using:
Messaging =========================
MMS ***********************
Server Name: 3MMS
Gateway: 10.176.57.25
Port#: 8799
Server Address: http://mmsc.three.net.au:10021/mmsc
Connection Via: Work
Sending size limitations: 300kb
Wap Version: WAP 2.0
3Mail ********************
Account Type: IMAP4
Incoming Mail: mail.three.net.au
Outgoing Mail: smpt.three.net.au
Domain:
Connection: Work
Connections ========================
3Netaccess******************
Enter a name for the connection: 3Netaccess
Select a modem: Cellular Line (GPRS, 3G)
Access point name: 3netaccess
User name:
Password:
Domain:
Advanced (nil)
3services******************
Enter a name for the connection: 3services
Select a modem: Cellular Line (GPRS, 3G)
Access point name: 3services
User name:
Password:
Domain:
Advanced (nil)
Just confirming those are the right settings. Remember you can change the name for the connections to make them easier to recognise - I called 3services Planet 3, and I didn't put the Netaccess connection in at all as I do not use the data packs (nor do I wish to until they get cheaper!).
You don't need to SuperCID/Unlock again; it sticks.
jmone said:
Thanks Kevin, I'm actually re-flashing as we speak as I found that after the SuperSID & Radio upgrade to 1.27 my Dopod "froze" several times today when the screen was off requiring a soft reset.
Couple of Q's:
1) Do I need to re SuperSID after flashing with "RUU_Hermes_HTC_WWE_2.05.255.1_6275_1.34.00.10_108_Test" (is this AKU3.3)?
2) Do you know what are the "3 Australia Settings" I need to re-enter
Thanks
Nathan
PS It was not me on any e-mail!
Click to expand...
Click to collapse
1. It doesnt really matter anymore as we have the SSPL tool which allows up to reflash nbh rom without having to change the CID
2. Sorry dont know them...
chingy213 said:
with the latest flash your installing, is internal GPS enabled??
Click to expand...
Click to collapse
which latest flash?? all shipped rom upgrades for the hermes do not have the GPS enabled... you need to use a Radio ROM from the Trinity....
Does anyone have the 3 settings and optus settings in a cab at all?
Cheers
Related
OK, I've had the i-mate JASJAM ROM installed on my TyTN for a little more than 24 hours. As you probably know, this device was just released this past week, much later than the TyTN. The ROM build seems to be signficantly better based on speed and maturity of the drivers. I have now installed the 2GB microSD card all the software I was using before, including...
1. SPB Pocket Plus
2. WorldMate Pro
3. Verichat
4. PIE Plus
5. Virtual Earth Mobile
6. TCPMP
7. SlingPlayer Mobile
It would seem that i-mate has fixed the issues I was having with the audio/video drivers. When using SlingPlayer Mobile with the original TyTN ROM, the stream would play successfully for a minute or so and then begin to stutter badly whenever I got an email or the device did anything else, which I believe was due to the audio driver. With the i-mate ROM, the issue is completely gone. I can leave SlingPlayer Mobile open indefinitely without issue. Additionally, I find the device significantly more responsive. While it is still slightly slow to turn on from standby sometimes, switching between applications and the overall responsiveness is much better. Now, whenever I press the envelope button, it switches to Outlook instantly while before there was a definite lag. Additionally, I'm getting significantly fewer momentary system hangs and the keyboard seems a bit more responsive, with very few skipped keystrokes. Lastly, battery life seems modestly better.
You can get the ROM over at xda-developers.com, but be sure to read carefully about installation. To get MMS properly installed again, you need to install that CAB from the original TyTN extended ROM.
That being said, I still can't get MMS to work through Cingular
The Cingular MMS Server Settings are:
Server Name: Cingular MMSC
Gateway: 66.209.11.61
Port:9201
Server Address: http://mmsc.cingular.com
Sending Size Limitation: 100K
Wap Version: Wap 1.2
I use:
# Server Name: Cingular MMS
# Gateway: wireless.cingular.com
# Port number: 80
# Server address: http://mmsc.cingular.com
# Connect via: MEdia Net
# Sending size limitation: 300k
# WAP Version: WAP 2.0
This is right from cingulars support page for use with the wizard. I have tested this on the TyTn and it does work.
OK, here's my problem. I'm using the isp.cingular APN to connect via the following settings...
Access point name: isp.cingular
Username: [email protected] (case sensitive)
Password: ZXY203DC9K0402 (case sensitive)
Believe it or not, I can not get the wap.cingular APN to connect for some reason! Do you have to be using the wap.cingular APN for MMS to work?
Thanks!
Don't know why dont you try these settings, test MMS, then we'll see from there.
Configuring the Cingular 8125 for Pocket Outlook e-mail and/or Wi-Fi access:
1. From the "Start" menu select Settings.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Tap the Connections tab, select the Connections icon.
3. Select the Advanced Tab.
4. Tap Select Networks.
5. Select My ISP from the dropdown and tap Edit.
6. With Cingular GPRS selected tap Edit.
7. Verify the following setting and press Next:
* Enter a name for the connection: Cingular GPRS
* Select a modem:Cellular Line (GPRS)
8. In the "Access point name" field enter wap.cingular and select Next.
9. Verify the following profile settings then tap Advanced:
* Username: [email protected]
* Password: CINGULAR1
* Domain: Blank
Verify the following settings and tap ok:
10.
* Use server assigned IP address: Selected
* Use specific IP address: Unselected
* Use software compression: Unchecked
* Use IP header compression: Checked
11. Tap Finish.
12. Tap Ok.
13. Attempt an internet connection.
If problem persists, please contact Cingular Customer Care.
NOTE:
APN: Access Point Name
Hey people, If i did install this new ROM onto my TyTN (removing the origional HTC version) what things would i need to do to ensure the TyTN is working just as it was before the new rom (3rd party apps and things like MMS) ???
What are the benefits of the iMate JASJAM ROM as compared to the original HTM TyTN ROM?
-JoKer
Just to add, ive began using the imate ROM and im experiencing MMS problems with O2 UK also..... update soon when ive tested further
...it seems that having installed the .cabs from the HTC ext rom it messed up MMS?! I reinstalled the imate ext rom by copying the contents from the wiki page in this file to the unlocked ext rom folder, then running the autorun file. It once again prompted for my carrier (to which i selected O2 UK contract) ....and (lol) again it froze when installing the IMEI restricted cabs.....a soft reset cured this. Now testing MMS and its working correctly.
(wiki page updated to warn of this effect)
Wifi problems after installing the JasJam ROM on a TyTN
I agree with the first entry on this thread that the imat eROM seems to perform better than the HTC version, however I do not seem to be able to get the WIFI to connect.
The Comm Manager shows it switched on but when you go to WIFI Settings, the screen does not show any settings and it is not possible to refresh a netwrok list to force a search.
Does anyone have any ideas? Is this an Extended ROM install that I missed?
Thanks
Mike
MMS a definite issue
I upgraded my TyTN to the i-mate ROM today after extensive research on line to see the effects of a move like this. It all worked fairly well and I agree with the original post that the i-mate ROM seems to improve performance and overall 'feel' to the device but I hit the MMS problems same as everybody else, despite trying to use both the i-mate MMS cab file and the HTC MMS cab file (and the MMS worked prior to flashing). I am now putting the TyTN ROM back to see if I screwed up somewhere along the line and maybe start again. I have seen advice saying use the HTC cab and advice saying use the i-mate EXT ROM in it's entirety so not sure where to go next.
(one thing I did do was to run the i-mate MMS cab prior to running the HTC MMS cab without a hard reset in between so this may have played a part)
Will keep you all posted....
Okay, the HTC ROM is back in place and MMS working fine - same connections settings etc. so there is def a compatibility prob with the JASJAM ROM on the TyTN. BUT..... having put the HTC ROM back the performance really, really does suck so I reckon I am going back to the i-mate option and will screw around with the MMS some more. If I get a definitive answer I will post here.
Finally.....
Ok, it turns out that I am something of an idiot as every time I tried to test the MMS I was typing in the connection settings incorrectly (one of those hand eye things, or the lack of!)......
In summary the JASJAM ROM works superbly on the TyTN device. There are one or two apps that will not run due to vendor locking (as most of you will already know) but on the whole it works perfectly.
To set the record straight (after all of you have looked at my recent posts and despaired) I have put together a custom EXTROM package that will install the necessary onto your device after you have flashed the JASJAM ROM onto it. In order to use it you need to flash the ROM and then soft reset just before the device runs the EXTROM (when it says 'Customizing in 3 seconds') and then unlock your EXTROM (see the wiki for details). Once you have unlocked your EXTROM put the contents of the zipfile into it and either run the Autorun exe or perform a hard reset (I prefer the Autorun option but it is up to you).
I HAVE tested this but only once or twice so pls use it at your own risk. On one of the occasions the MMS was not installed correctly so this was resloved by running the MMS CAB file from the EXTROM.
Daryan - good work
what cab files are included in your attachment?
I have had a lot of trouble with the MMS settings myself
I installed the relevant MMS cab file and it worked ok but on a soft reset the settings had gone!!
I left it overnight last night with the mms settings installed and when I came to it this morning, they remained after a soft reset!
I did a hard reset and reinstalled the MMS settings via the cab file and again they had gone after a soft reset!
For a final time, I did hard reset, reinstalled MMS cab, left for about 20mins, did soft reset and the mms settings remained.
Elsewhere peple on other devices have mentioned the need for the mms settings taking several minutes to be written to device memory. This appears to be true with my experiences with the tytn mms cab file.
daddyo said:
Daryan - good work
what cab files are included in your attachment?
Click to expand...
Click to collapse
The only cab files that are present are (and some of this is general presumption rather than accurate knowledge) the imate generic stuff such as audio / video drivers etc., the smartdialer, vendor specifics and the MMS install (expand the zip file for specifics)
daddyo said:
I have had a lot of trouble with the MMS settings myself
I installed the relevant MMS cab file and it worked ok but on a soft reset the settings had gone!!
I left it overnight last night with the mms settings installed and when I came to it this morning, they remained after a soft reset!
I did a hard reset and reinstalled the MMS settings via the cab file and again they had gone after a soft reset!
For a final time, I did hard reset, reinstalled MMS cab, left for about 20mins, did soft reset and the mms settings remained.
Elsewhere peple on other devices have mentioned the need for the mms settings taking several minutes to be written to device memory. This appears to be true with my experiences with the tytn mms cab file.
Click to expand...
Click to collapse
This is not something that I experienced so can't comment but what I can say is that if you let the standard JASJAM EXTROM install after a flash or hard reset then the MMS feature is not installed straight away. You can get it to work by running the MMS CAB from the extended rom but this also allows the vendor locked cab files to attempt to run and this is an unknown variable. I recommend perform a fresh install (or hard reset) and stopping the EXTROM running by performing a soft reset after initial configuration (see above). Doing it this way seemed to go well.
This is very interesting results! I still haven't got a Vario II yet, but its something I will definitly be pestering my mum for, for a long time lol.
Anyway...
1. I see you use TCPMP, is there a good improvement in playback on this ROM ?
2. What version of the JASJAM ROM is this ?
3. Does the device freeze due to recharging like reported alot ?
4. Lastly... Does the normal stuff work.. Wireless, Bluetooth, Calling, etc...
Thanks v.much in advance!
gmatharu12 said:
This is very interesting results! I still haven't got a Vario II yet, but its something I will definitly be pestering my mum for, for a long time lol.
Anyway...
1. I see you use TCPMP, is there a good improvement in playback on this ROM ?
2. What version of the JASJAM ROM is this ?
3. Does the device freeze due to recharging like reported alot ?
4. Lastly... Does the normal stuff work.. Wireless, Bluetooth, Calling, etc...
Thanks v.much in advance!
Click to expand...
Click to collapse
Interestingly, I haven't had a chance to test the playback much even tho this is main reason I looked into switching the ROM! When I get a chance to play I'll let you know.
It is a cut down from version 1.18.255.3 07/22/06 (EXT ROM 1.18.255.106) which is the latest WWE version as far as I could tell
The answer to 3 is a no, not that I can tell at the moment.
The 'normal' stuff is all fine. I did quite a lot of research before moving to this ROM and the only probs I found mentioned were MMS (which I spoke about above) and WLAN which I have found to be working fine.
Thats great! Thanks!
Cool and let us all know how TCPMP does when your free, much appreciated!
Hi Friends:
I would like to know how to install & setting the new Arcsoft MMS 5.0.31.7...I have the following files:
- _Alex__Arcsoft_MMS_5.0.31.7.cab
- SettingDll.zip (SettingDll.dll missing from the cab. I have attached the file. Copy to \windows)
- Transport.zip (transport.exe is missing)
and I have the following settings in Alltel MMS:
Server name: Alltel MMSC
Gateway: Delete it, leave blank.
Port #: 8080
Server Address: http://mms-mt.alltel.net/servlets/mms ( note the "-mt" and the ".net" instead of ".com" )
Connect via: Alltel Wireless
WAP2.0
Can you help me?
Thanks
TecMan
SPRINT HTC MOGUL PPC-6800
ROM version: dcd 3.0.1
Carrier: Iusacell (Mexico)
Radio version: 3.35.04
I should note those settings I posted were from Lenny's Forums, I didn't give credit. I know we tried several settings in the DCD's 3.0.4 thread, but I don't know if any worked. I would also like to know if anyone got the newest mms working with Alltel.
TecMan45 said:
Hi Friends:
I would like to know how to install & setting the new Arcsoft MMS 5.0.31.7...I have the following files:
- _Alex__Arcsoft_MMS_5.0.31.7.cab
- SettingDll.zip (SettingDll.dll missing from the cab. I have attached the file. Copy to \windows)
- Transport.zip (transport.exe is missing)
and I have the following settings in Alltel MMS:
Server name: Alltel MMSC
Gateway: Delete it, leave blank.
Port #: 8080
Server Address: http://mms-mt.alltel.net/servlets/mms ( note the "-mt" and the ".net" instead of ".com" )
Connect via: Alltel Wireless
WAP2.0
Can you help me?
Thanks
TecMan
SPRINT HTC MOGUL PPC-6800
ROM version: dcd 3.0.1
Carrier: Iusacell (Mexico)
Radio version: 3.35.04
Click to expand...
Click to collapse
so even though your carrier is Iusacell, you are using alltel's mms server? is that how mms should be set up for your carrier? seeing as how i know nothing about iusacell, my best guess would be that you are not using the right server, as in, not to use alltel's server.
Hi fallingup:
Thanks for your reply...and I don't have installed the new Arcsoft MMS 5.0.31.7 yet....I just want to know your expriencies about it....I know that Arcsoft MMS works with all carriers...but need more info.
Thanks
TecMan
SPRINT HTC MOGUL PPC-6800
ROM version: dcd 3.0.1
Carrier: Iusacell (Mexico)
Radio version: 3.35.04
I've been trying and trying to get 5.0.31.7 working on the Alltel 3.0.4, but I just can't get the settings right. It's frustrating, but I know that there are smarter people than me working on it, so hopefully it'll be worked out soon. Also, I haven't gotten mms to work consistently since I upgraded to to the 3.35 radio. Using Lenny's cab, I can send mms without issue, but I only receive mms sporadically. For instance, I'll test by sending myself an mms and it'll work. Two minutes later I'll send the same pic to myself again, and it never comes through. I estimate that only about 1 in 4 of the mms messages sent to me actually reach me. I seem to be alone in this problem, though, so maybe it's just my phone.
I ended up redoing the whole kitchen again to get it to work. I am on Verizon and when I upgraded it started working out the gate.. It is also worth the time to redo also since its built into the threaded SMS also now..
RevSoft, is there some way to install Arcsoft (and make it functional) w/o having to reflash a whole new ROM? I'm on verizion with the alltel rom and I've downloaded and installed the cab -- but it dumps me to outlook whenever I try and send a photo to somebody...
being given a hermes but it is AT&T branded.... it will obviously come without sim and I need to unlock it so can be used on TMO..... will I still be able to do this by connecting it by usb and using the v3a unlocker? Also if there is anything else I should no that I may have missed roaming the threads please let me know.... I currently have an excalibur so am pretty familiar with modifying things.
all gsm phones comes with a sim of sorts
he's being given the phone, so the person giving it to him is probably keeping the simcard?
you should be able to unless the unlocker states otherwise..
the phone is fully functional (bar the phone/texting) without a simcard as its a PDA / Phone
kingsizeriz said:
he's being given the phone, so the person giving it to him is probably keeping the simcard?
you should be able to unless the unlocker states otherwise..
the phone is fully functional (bar the phone/texting) without a simcard as its a PDA / Phone
Click to expand...
Click to collapse
Ok just making sure... also I could not find USA tmobile settings for once it is unlocked to get everyhting working right. I know there is special settings for the excalibur to get MMS and sms working properly so I would assume that hermes would be the same.
I found the keyboard fixes as mine is an 8525(cingular) but I want everything to work right.... If I missed it just link where I need to go for US tmo setup.
I dont mind doing the reading... THANKS!!!
PS..... Obviously I will be changing ROMS too
Is it the same as excal....?
Here are the steps and settings:
Step 1. Setup GPRS connection for T-Mobile network:
Start > Settings > Connections (tab) > Connections > Advanced (tab) > Select Networks > New...
Enter the name for the profile (e.g. T-Mobile), then go to "Modem" tab and click "New...", enter name for the connection (e.g. T-Mobile Data), choose "Cellular line (GPRS, 3G)" in the drop-down menu, click "Next", the access point should be "wap.voicestream.com", click "Next", leave all fields blank on this page, click "Finish". Now go to "Proxy Settings" tab and select "This network connects to the Internet".
Click "Ok" all the way out.
Step 2. Setup MMS:
Start > Programs > Messaging > Menu > Tools > Options... > MMS > Servers (tab) > New
Server name: (you name it)
Gateway: 216.155.165.50
Port Number: 8080
Server address: http://216.155.174.84/servlets/mms
Connect via: (the connection you created in step 1)
Sending size limitation: 300K
WAP Version: WAP 2.0
Click "Ok", set this new entry as default (with a red arrow on the icon).
check out HTC Network Wizard (comes precooked into most roms now..) if not then schaps operator setup
does the leg work for you
Similiar to the excal 6.1 roms then.... I am reading all the new roms now so trying to decide where to go first LOL.... seems all have good and bad... I'll keep wading through them
Hey guys i just bought a mogul on ebay and had it flashed to metro pcs, the internet, and gps work fine, i just cant get it send out mms like many of ur phones can, i dont have sprint picture mail, because i have metro service.
ANY HELP WILL BE GREATLY APPERICATED!!!!!
Did you install Arcsoft? If you did not, you might want to find a copy of it to intall on your phone.
Once you do, follow the directions below as a guideline.
Remove/Uninstall any existing MMS composer you have attempted to setup. Also a good idea to remove any registry keys it may have created that are left behind after the uninstall.
1: Install Arcsoft MMS version 5.0.70.24
2: Open your Messaging and click on the SMS/MMS option.
3: Click on "Menu" and select "MMS Options" then select the "Servers" tab.
4: Add a new server with the following settings:
Server Name: metropcs
Gateway: wap.metropcs.net
Port number: 3128
Server address: http://mms.metropcs.net:3128/mmsc
Connect via: SELECT EITHER THE CONNECTION YOU SETUP ABOVE OR "The internet"
Send limit: 399K
5: Click "Done" and then set the new server as default.
6: Using a Registry Editor edit the following values:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]
DELETE KEY -> "X-VzW-MDN"
ADD STRING -> "X-metropcs-MDN"="XXXXXXXXXX" ( Insert your 10 digit phone Number )
ADD STRING -> "X-DEVICE-MIN"="1XXXXXXXXXX" ( Insert your 10 digit phone Number WITH the 1 in front of it )
Hope this helps nobale Metro PCS cousin...8)
*P.S.-- You might also want to find the Titan MMS fix CAB by CRwinger to help keep your MMS working properly. The reason is that when you open PIE it creates a registry key that will stop you from send/recieving MMS. The CAB file will automatically delete that file by pressing the messaging hard button on the top left of your Mogul.
Other alternative is not to use PIE and just use Opera.
PM me if you need any help, I'm with Cricket so we are almost in the same boat. 8)
mougl flashed to metro, mms problems
i'm really not smart when it comes to computers and pda, what is a pie and what is opera?
I'm pretty sure that PIE is something internet explorer. Opera is a mobile web browser. Probably one of the best since you can get youtube
mogul flash to metro, mms problem
ok i've located arcsoft mms 5.0.70.24, which on this forum, one do i download because i see beta and several other versions.
I use 5.0.31.19 myself. Any version after that or a beta is fine really. Its a trial and error of how well the software version you have works like you want it to.
Just DL anyone of them.
*Important--If anything back-up your phone just incase you need to do a hard reset. Use a program called PimBackup...its free.
As paintballinfl said:
PIE=Pocket Internet Explorer
Opera= A new browser for PDA's to view websites as if you are actually at your desktop.
mogul flashed to metro, problem with mms.
thanks, i had downloaded a older version, how do i delete the older program completely? i removed it from my phone but, what's a registry edit? and how do i do that before installing the new arcsoft?
You need to find phmReg Edit and use that program to do your registry edits...its free just google it.
Also if you already have a version of arcsoft installed use the guide to get MMS working for you on Metro PCS. If that version doesn't work for you do the advised below.
*If you want to change the version of arcsoft it is best to start from scratch and hard reset the device. Thats why i suggested you to do a back-up your phone. Also if a hard reset is needed please be careful because it will erase everything on the phone except the SD card.
So it goes like this:
install phmReg Edit-->install Arcsoft-->follow steps in guide
mogul flashed to metro pcs, mms problem.
THANK YOU GUYS... i'm able to send and receive picture and video mail, i just gotta get the titian cab fix or install opera, to keep it up.. what's the best opera version to install?
There are many builds out there but Opera build 2392 is good...seems to make it the default browser instead of PIE.
For example: When clicking on a link in a text message, Opera will open instead of PIE.
The Titan MMS fix by CRwinger I believe you might be able to find on PPCgeeks.
mogul flashed to metropcs, mms problems
Is it the mms cab fix for cricket? because i found that one, it was a choice between that one that the vougue fix. and if i choose the cricket fix will i have to redo all the setting back to metropcs? any link to the titian mms fix cab would be appreciated greatly!!! THANKS
hey where can i find the right one Install Arcsoft MMS version 5.0.70.24 for metro because it has different type of them like verzion and alltell etc.. which one is the best.....please help me
I really didn't wanted to ask another question about connection, but none seems to resolve my problem.. *sigh* I've searched forums for some info and i got so lil information that i don't know from where to start.
3 days ago i was at home, browsing internet like always "H" icon was on my taskbar. I've gone to work and i've got an info from "htc" that im "outside of my operator tax free internet area" (whatever). Since i have few megabytes left to use, i've clicked "opera" and... couldn't connect! i've got the following message:
"Cannot connect fot an unknown reason. To check your connection settings and change them if needed, tap settings. If the progblem continues, reset your mobile device according to your manufacturer's documentation and try again."
Ok now... so i went to settings > tapped MENU > all settings > connections > connections > "add a new modem connection" and entered :
Connection name: Internet
APN: Internet
User name: none
password: none
domain*: none
then gone to advanced TAB.
"select networks" chosen network and connection i just made. ( Do i need to set some kind of proxy? i saw on one forum to set it to 0.0.0.0, mine is 10.10.25.5)
i guess thats all.
i tried soft reseting. Hard reseting. i even changed ROM... and still... problem stays...
I've visited my operator website and they said that i should connect my HTC to pc and use the software for it so i can set up my connection, and they gave me info, about what to type...
But theres no any software for HTC, is there? except active sync thingie?
they gave me:
APN: Internet
Access number: *99# <-------------------------------- How? What? Where?
User name: none
Password: none
DNS: dynamic <-------------------------------------------How? What? Where? again!
Oh! and i installed N.O.V.A android game the day my connection went down, but even if i unplug my SD card, problem stays, Actually my phone is clean now.
INFO ABOUT MY HTC HD2
OS: 5.2.21913 ( 21913.5.0.94)
manilla: 2.5.20181527.0
rom ver: 3.14.405.2 WWE
rom date 9.29.10
radio: 2.15.50.14
protocol ver: 15.42.50.11U
European Version "HTC LEO"
ps. i even used some "connection wizards" to estabilish connection... none have worked...
Hope someone can help me with this problem...